[Q] Flashing new rom help after brought back to stock. - Fascinate Q&A, Help & Troubleshooting

After playing with the new Cyanagen mod for a few days I had a few problems and had to bring it back to stock from a great tutorial I found and have used 2 times.
I'm now at:
Firmware 2.2.1
Kernel Version: 2.6.32.9
Build: EB01
I've looked around and really like the MIUI rom put out by Espresso but there just seems to be a few quirks it needs to iron out and I'm thinking of putting on
[Rom]{10.18.11}[EI20] TSM Resurrection 1.0 (touchwiz4/tsm parts)
Looks great. But reading thru it a bit it says:
1. Must be on EH09 or EI20 already (can flash over EH09 with a data/wipe)
How do I go about prepping my phone to get it *THAT* ready for this rom?
I've already rooted again and installed CWM-ALL on the phone.
All the OTA updates have been done. I remember reading somewhere that EB01 wasn't an official build so some OTA updates would not come down for it.
So much help here, it's insane. I love you peoples.
TYIA
-Fuzzy

Flash this in Odin:
http://www.mediafire.com/?c37loxth85zn2ti
Use the pit file to repartition (check repartition in Odin).
After that is on your phone you can flash TSM resurrection through CWM.
Next time ask your question in the Q&A section of this forum.

Thanks.
I'll make sure my next question goes into the Q&A forum. Darn, really thought I was in the right place. My bad.
P.S. Keep up the good work, man. This is awesome. BEST place for help and information.

Related

[Q] How to create a flash-able/Odin of my New T959UVJI6 Samsung Vibrant.

How do you create a flash-able/Odin of my New T959UVJI6 Samsung Vibrant?
This will be my back up (FLASH /ODIN), because there will be some Fresh ROMS that will be released soon, and I want to make the Jump, but I have to at least have a back up.
Knowing how to create this image (or what ever it is called) will help me share more to this community, I would be more than happy to share this image here, and to test more roms, apks, kernals, or patches & updates knowing that I am free to Q.A. the releases if I had a stock image that I could flash or odin at the end of the week or at the end of the test cycle.
Model Number T959UVJI6
Firmware Version: 2.1-update1
Kernel Version: 2.6.29
Build Number: ECLAIR.UVJI6
(I have searched numerous times and the search is not available each time)
I don't think it's possible to create a custom ODIN complete flashable backup yet. It's been worked on but so far not successful -
Here's the original thread:
http://forum.xda-developers.com/showthread.php?t=794425
There are stock images for both 2.1 and 2.2 that can be flashed via ODIN, though. All are easily found in the stickies.
Shrivel said:
I don't think it's possible to create a custom ODIN complete flashable backup yet. It's been worked on but so far not successful -
Here's the original thread:
http://forum.xda-developers.com/showthread.php?t=794425
There are stock images for both 2.1 and 2.2 that can be flashed via ODIN, though. All are easily found in the stickies.
Click to expand...
Click to collapse
Hay Shrivel,
Thanks for the reply, I get the stickies - they are invaluable to the members here.
But most of the stuff out there are at best still in beta, buggy and were configured for or from another user and still needs tweaking.
My phone is like a virgin, and I really don't want to flash her because once you flash, it can become extremely challenging to back to stock.
There is a lot to say about stock, yea it's slow and not as robust, but it is free of bugs.
serendipityguy said:
My phone is like a virgin, and I really don't want to flash her because once you flash, it can become extremely challenging to back to stock.
There is a lot to say about stock, yea it's slow and not as robust, but it is free of bugs.
Click to expand...
Click to collapse
Getting back to stock is really easy - you just have to make sure you can get into download mode reliably and you have the proper drivers on your PC. It's getting back to the current state of your phone that's the tough part (well, not THAT tough, if you know the steps. But not yet possible in a single step.)

whats the best choice?

hey guys sorry if im asking noob question here. im new to the samsung thread area. im used to x and inc.
just recently got this for my wife. been rooted. and thats it. im wanting well, shes wanting to stay on stock side but not too deep with custom rom. i was wondering if anybody had the file or link to a deoxed version of this 2.2 fascinate i could flash over? im not really familliar with dl30 or etc and i dont' know which is the recent 2.2 doexed version. any help would be great. or any rom thats close to stock and deoxed. thx again.
ps. what the heck is voodoo? are we talking about that new digital copy deal or ?
Here's a link to what you asked for:
http://forum.xda-developers.com/showthread.php?t=948943
This belongs in general. You should really use the search function.
http://www.xda-developers.com/announ...oderator-team/
http://forum.xda-developers.com/showthread.php?t=948679
Do all of this, except instead of flashing the ROM in that thread, flash this deodexed ROM (same one that chameleo78 linked to). http://dl.dropbox.com/u/20950916/EB0...xed-signed.zip
And Voodoo is a lagfix. Stock Galaxy S phones use the RFS file system, but if you flash a Voodoo kernel it makes the file system EXT4, which improves read and write speeds.
thx for the response guys!!! drop box if over loading so ill wait until it comes back online. thx

ROM suggestions for an intermediate-noob.

Hey guys. I would really love someone to shed some light on what's going on here.
My firmware version is 2.2.1
Baseband version is DL09
Kernel version 2.6.32.9
And build number is DL30
I'm running a super clean ROM I believe, but this week I would like to upgrade to the latest (fully stable) releases. I know there's a new modem and new kernels out. Can someone with experience point me in the right direction to get my phone up to the latest and greatest!
Thank you so much!
So I'm kinda new to the whole process, been hacking my fascinate for a month or two, but i'll share what i know, please anyone correct me if i'm wrong on any of this
*note* i assume as you say your an intermediate noob you should know how to flash kernels and roms with out any problems if not check out this tutorial:http://www.androidpolice.com/2010/05/08/complete-guide-how-to-flash-a-custom-rom-to-your-android-phone-with-rom-manager-full-backup-restore/
As far as i can tell EB01 is the best kernel there is right now, most if not all of the CURRENT rom versions are at least using part of it, most are in conjunction with EB16 and EA15. so updating to that would be my first suggestion.
here is a voodoo version of EB01:http://dl.dropbox.com/u/19137626/Android/eb01_voodoo.zip
next i have had good luck with Super Clean 2.9.1, here is some info about it:http://forum.xda-developers.com/showthread.php?p=11900140#post11900140
as for finding a rom that fits your style and level the knoly way to know is to try them out. just make sure you backup a stable rom you know works before going on that adventure
good luck and i hope this helps
EDIT: go here: http://forum.xda-developers.com/showthread.php?t=897889. It will give you a more in depth explanation of everything you asked about and need/should know
Thanks for your reply man. EB01 seems to be the kernel for me. What about modem upgrading?
modem upgrading
a quote from the beginner's guide:
These updates also include a radio, which is the phone's programming that it uses to communicate with your cell service. Those are flashed via Odin, the same way you installed clockworkmod.
The Froyo EB01 update has it's own radio that needs to be flashed via Odin.
The version of your radio can also be verified in Settings > About Phone > "Baseband version"
Click to expand...
Click to collapse
my understanding is that when you flash the new EB01 release of Froyo it will upgrade that as well...i was looking for the original post here on xda but couldn't find it if i can find my file i will post it here for you to dl.
This is a very complete guide on how to get up to speed with EBO1.
http://forum.xda-developers.com/showthread.php?t=948722
It has links to kernals, radios (modems), and ROMS.
You may have to do some digging for things like red CWR and voodoo kernals. But this will take you step my step in updating your fascinate.

[Q] Installing CM7 on Telus Fascinate

Hello
This is my first attempt at flashing a custom ROM on my phone i have a bit of experience flashing custom stuff from the PSP Scene but if anyone can offer a bit of advice on this I would appreciate it. I have poked around in the forums here and have seen a few guides for flashing a custom ROM on a Telus Fascinate but all of them seem to be slightly different and a few months old so the files referred to may or may not be out of date or the links are broken.
I currently have my phone rooted with the voodoo lag fix kernal running aand would like to install CM7
Ok so after all this long windedness here are my questions
1) the first step seems to be to install a non stock kernal can i us the voodoo kernal to install CM7 (i assume i have to turn off lag fix)?
2) Guides refer to installing the full version of the ROM first and then apply the update but the only files i seem to be able to find is the "nightlys" can i use the latest nightly when flashing?
If anyone has a latest and greatest guide and a working link to any of the files need it would be greatly appreciate
Thanks
http://forum.xda-developers.com/showthread.php?t=923712
This is the best guide/file links for CM7 on SGH-959D
Rabid_Gypsy said:
http://forum.xda-developers.com/showthread.php?t=923712
This is the best guide/file links for CM7 on SGH-959D
Click to expand...
Click to collapse
Thanks
Looked at this one previously since it was really the only one that includes having the voodoo kernal to start...my only question with it is which CM7 Rom to use. Can i just use the latest nightly coming from stock 2.2 or is there a Base CM7 that you have to start with then once thats installed upgrade to the latest nightly
http://forum.xda-developers.com/showthread.php?t=1115090
I found this guide too (which seems to be newer) but i can't post there to the 10post rule

[Q] Questions about flashing ICS for a friend

Hello everyone, I'm trying to do a buddy of mine a favor by upgrading his Vibrant to something a lot better (he's on stock) but I'm a bit unclear on a few things. First of all let me get out of the way that I'm a Fascinate (Verizon) owner that recently modded my own phone to run AOKP ICS Milestone 6 with great results, so I figured since he pretty much had the exact same phone I could do it for him. The problem I'm running into is the procedure I used to flash my phone doesn't seem to apply to the Vibrant (or at least what I was searching for) so I just wanted to clear up a few steps before I try to flash his phone.
He's not a very tech savvy guy, so he won't be updating ROMs on the bleeding edge or anything, he just wants his phone to run better so I figure ICZen is the way to go right, considering it's based off of what I'm using now (AOKP M6)? Everything needs to work, so that pretty much rules out any JB right now because of the GPS issues. Okay now onto the specific flashing questions:
1) This thread seems to be the go to thread for flashing the Vibrant, but it hasn't been updated since Dec '11, so would I just follow the same procedure for the newer ICS roms?
2) Here is the guide I used for my Fascinate (see section 4), which has a few extra steps that I notice are lacking for the Vibrant... namely installing cwm4 fixed for cm7 first, then installing THS Build 2, then flash over that with whatever ICS Rom you need.
3) Devil Kernel is what's considered best on my phone running AOKP M6... is that true as well for ICZen?
4) Since the Vibrant never got 2.3, what is the best modem to be using? On the Fascinate the EH03 (GB) stock modem is best, but I'm unsure what the deal is for the Vibrant since they never got an official GB update. Also along the same topic, Verizon has a code you can input that updates your PRL and improves reception... does T-Mobile have such a code or not?
I appreciate any and all input, as I want this to go as smoothly as possible. Thanks
You seem to have a pretty good grasp on what your doing.
From stock, install gingerbread bootloaders then go to recovery via volume rocker down and hold power button, until the logo. Might have to practice it a couple times.
Once in recovery click reinstall packages, might have to do it s couple of times. This installs your update.zip
From here I always perform wipes and flash a custom Froyo ROM. Maybe overkill but, only takes a second and I don't mind.
From here I flashed the latest CM9 nightly and on to Helly Bean.
Do your wipes in between flashes, and you should be fine.
I haven't ever heard about a T-Mobile code for tower updates, I think its automatic.
Well I didn't have to worry about bootloaders on my Fascinate since I was already on GB, so that's a bit new to me... but doing a quick google search I found this guide. Is that an accurate guide to follow? Alright so basically what you're saying is before I root at all I need to do this?
Also like I was saying earlier, he wants everything to work so I think Helly Bean is out of the question because of GPS, right? I was thinking ICZen looks the cleanest, with everything working nicely, and it's based on what I'm currently using on mine.
Can you clarify on why you're flashing a custom froyo rom? I won't mind to do that either, if it has any benefit.
Also, I checked his phone last night and it's on stock 2.2, not 2.1 if that makes any sort of difference. Thanks again
First root and get cwm recovery then flash bootloaders. The vibe never got an official GB, so that's why boot loaders are recommended. The guide you have is fine. Second the GPS on the vibrant has been notoriously hit or miss. I have a captivate, the GPS works great but my vibe couldn't get a lock to save my life.
Now as far as iczen or hellybean, you have to weigh the options:
Iczen is a great ROM and might have a better chance getting a GPS lock. IMO if you can get a lock with ICS you will probably get a lock with JB. But with ICS you have to be concerned with the EU bug. What's that you ask:
There has been an issue with people randomly looking at phone and a message saying encryption unsuccessful press to reset. If you press the button you have basically just locked up your internal SD card. If you don't press you MIGHT be able to recover it. There is a workaround if this happens, to use ext SD only but your friend will not like that.
I'm currently running hellybean on both of my devices and I love it. Like I said, cappy gps works great and my vibrant not so much. If you really want stable go with bionix as toast recommended or one of moped Ryder's ROMs . If you want to be wowed, go with hellybean.
There are some things you can try with it to get a GPS lock. The general consensus is turn on GPS, reboot, wait it out till you get an initial lock. After that locks will be quicker. I hope this helped in some way, if so hit thanks. As far as the guides etc you are good to go.
its peanut butter jelly(bean) time
That did help quite a bit, thank you. I have never even heard of that bug, do you know if that's Vibrant specific or can that happen on any of the others? I have been wanting to try Helly Bean on my Fascinate, but unfortunately my sdcard isn't very stable and I don't trust to flash anything until I can buy a new one. Honestly, I don't even think he cares much about the GPS, my original point was more along the lines of that I wanted to give him as much of a glitch-free experience as possible, so my fault for not being more specific. If Helly Bean is as stable as you're saying, then maybe I'll just do that instead then, especially after you explained that glitch. Also, since I don't have any Helly Bean experience myself, does it offer as much customization as AOKP? I've grown quite fond of all the little tweaks they include
Hellybean is pretty stable. When I did my vibrant I didn't have to use a boot loader I went straight to ICS then jellybean. If you want ICS then you may want to try aokp for his vibe its nice. If you end up trying aokp milestone 6 and have unknown baseband let me know and I'll link you to a linario build that should fix that
Sent from my SGH-T959 using xda app-developers app
I have a complete guide to install ICS ROMs in my signature if you feel so inclined. PM me if you need any of the files or I may just host them on my Dev-Host account. I'll be out most of the day, but I can upload them later on tonight.
When I need to go back to stock and root and flash cwm I use the AIO toolbox. I just put the rom on the internal flash and then use AIO to get cwm on it from the flash custom rom option. Then cancel the file and the phone will reboot into recovery where you install packages twice and should end up in cwm.
The EU bug has hit vibrant and captivates that I know of. It seems rare though, if you think about the number of users compared to the reported number of cases of the EU bug, its a small percentage.Hellybean doesn't have nearly as much customization but it does offer theming and some launcher/lock screen tweaks. You could always use a custom launcher. There are a few other jellybean ROMs you could try. Honestly any way you go will be better than stock!
*I forgot to tell you, you will need to Odin back to stock 2.1!
its peanut butter jelly(bean) time
Yeah.. I don't think root is actually necessary to do any of this. You'll be rooted when the process is complete however. The custom ROMs come with root access.
But to elaborate on Samsgun357's last post, if you are currently on Froyo 2.2 stock, you'll need to Odin back to stock 2.1 prior to starting, because Samsung fixed the bug that allows installation of custom recovery when they released 2.2
It's simple to do, search the forums and you'll find a guide on Odining back to JFD. That's stock Eclair. If I have time in a few I'll locate it for you and post it.
There are YouTube videos about it with links to the files as well. I think djeddie1west posted a good one with links to all files needed, if they are still working links.
Edit: http://forum.xda-developers.com/showthread.php?t=1117990
There's the link for installing GB bootloader.
Also, I am on my phone and haven't tested links, but as long as they work, near the bottom of the post you'll find the files needed to Odin the JFD files.
Eh, I just gave up and told him to go get an iPhone instead, to increase his hipster status.
Or... that's right, I'd rather be dead than own one of those ugly bricks.
You have all been extremely helpful, and I think I have more than enough to go on. I think for now I'll just throw ICZen on his phone since it's based on the rom I'm most familiar with... and when I have more experience with Helly Bean (I finally ordered a new sdcard that's on the way, so I can play with it on my own phone soon enough :good I'll just flash his again. He'll be okay with the risks mentioned so far in this post, and honestly his upgrade is coming up soon so I'm sure I'll be drooling over his S3 when that time comes.
@Woodrube That guide you made to install ICS was exactly what I was looking for, and I wish I had found it earlier so thank you for making such an excellent post.
I'll post back here with the results, thanks for all the help once again

Categories

Resources