I'm sorry if somebody already posted that, i swear I had a look
I have a SIM unlocked AT&T MB860 Atrix with gingerblur 4.5, and I would like to try some real gingerbread goods, which means bootloader unlock and 2.3.4 HKTW.
Do I have to flash back to 1.8.3 stock sbf before actually unlocking and installing gingerbread? I heard people saying is not safe to flash sbf for SIM-Unlocked Atrix because it can cause Wi-Fi problems, is it still the case?
Second problem: I had my phone rooted, but now I don't have an external micro SD card, so I wouldn't be able to root with gingerbreak-similar methods, is this a deal breaker or there is another way to complete the process all the way through?
Thanks a lot
As a general rule, it's best to flash back to stock before flashing anything else. Because Gingerblur requires Tenfar's recovery to run, I believe this will be the best way to do this. If someone else could chime in about the SIM-unlock/wifi issue, that would be great.
As for the rooting method on 2.3.4 HKTW, it works by installing a ZIP through recovery. In my own experience, it only seems to read external SD cards. If you can make it read the internal somehow, then you should be able to root.
i was on GingerBlur 3.1 (rooted via GladRoot), and did the following over the weekend
- flashed the unlocker SBF (still on 1.8.3)
- flashed the new CWM onto the phone via fastboot
- flashed GingerBlur 4.5 using that CWM, just for a few days
- flashed the 2.3.4 IMG using the Windows x64 guide in the general forum.
ran into no problems, and the GB build was already rooted when it booted up.
dLo GSR said:
i was on GingerBlur 3.1 (rooted via GladRoot), and did the following over the weekend
- flashed the unlocker SBF (still on 1.8.3)
- flashed the new CWM onto the phone via fastboot
- flashed GingerBlur 4.5 using that CWM, just for a few days
- flashed the 2.3.4 IMG using the Windows x64 guide in the general forum.
ran into no problems, and the GB build was already rooted when it booted up.
Click to expand...
Click to collapse
Good to know, thanks!
Did you clear data or anything like that after flashing?
jwhited said:
Good to know, thanks!
Did you clear data or anything like that after flashing?
Click to expand...
Click to collapse
oh, right, forgot. i did do the fastboot -w beforehand.
i have simunlocked atrix as well, it makes no difference.
I went from Greyblur straight to GB with no issues.
Thanks guys
This is worth a try
If I wanted to return to the stock ROM after flashing 2.3.4, all I have to do is RSDLite flash 1.8.3 back correct and then restore using CWM?
kshiuan said:
If I wanted to return to the stock ROM after flashing 2.3.4, all I have to do is RSDLite flash 1.8.3 back correct and then restore using CWM?
Click to expand...
Click to collapse
I just did this tonight, and for some reason, I had some problems flashing the 1.8.3 SBF directly. So I downloaded the 1.2.6 (shipping) firmware and just did the updates.
Hi guys, posting for my wife here. She has an Atrix, running Cherry Pi 0.7 currently (unlocked bootloader, romracer recovery, etc). The touchscreen is completely borked, doing all kinds of weird things. I know it's a hardware issue, i have tried flashing 3 different roms, 4 different keyboards, and multiple wipe/reinstalls of roms. Always does the same stuff with the touchscreen - not responding to input, random multiple presses of qqqqqqqq when trying to type, soft buttons not working, etc.
i want to return the phone to complete stock so i can send it in to Motorola to be either repaired or exchanged. I cannot find any insrructions for this for an AT&T Atrix. How can i get back to stock os, factory recovery, and locked bootloader like when it was new? I tried search, but cant find exactly what im looking for. Can someone help me out, please? Thanks.
its been said before that once you're unlocked, you're always unlocked. Flash a fruitcake for a stock setting.
RampageRR said:
Hi guys, posting for my wife here. She has an Atrix, running Cherry Pi 0.7 currently (unlocked bootloader, romracer recovery, etc). The touchscreen is completely borked, doing all kinds of weird things. I know it's a hardware issue, i have tried flashing 3 different roms, 4 different keyboards, and multiple wipe/reinstalls of roms. Always does the same stuff with the touchscreen - not responding to input, random multiple presses of qqqqqqqq when trying to type, soft buttons not working, etc.
i want to return the phone to complete stock so i can send it in to Motorola to be either repaired or exchanged. I cannot find any insrructions for this for an AT&T Atrix. How can i get back to stock os, factory recovery, and locked bootloader like when it was new? I tried search, but cant find exactly what im looking for. Can someone help me out, please? Thanks.
Click to expand...
Click to collapse
If you haven't updated to OTA 2.3.4, you can SBF flash 2.2.2 and it will restore your phone to default.
Note: It will remain unlocked, but it won't show the "Unlocked" text during boot.
This way you might get lucky and they fix it without noticing that it's unlocked.
Good luck.
xploited said:
If you haven't updated to OTA 2.3.4, you can SBF flash 2.2.2 and it will restore your phone to default.
Note: It will remain unlocked, but it won't show the "Unlocked" text during boot.
This way you might get lucky and they fix it without noticing that it's unlocked.
Good luck.
Click to expand...
Click to collapse
the SBF file, is that the Pudding one? (sorry didnt mean to hijack just have the same problem)
Pizzaapu said:
the SBF file, is that the Pudding one? (sorry didnt mean to hijack just have the same problem)
Click to expand...
Click to collapse
Not pudding, I meant SBF flash full stock 2.2.2 rom.
BUT YOU CAN ONLY DO IT IF YOU HAVEN"T UPGRADED TO OFFICIAL OTA 2.3.4!
Or you will HARD BRICK! LOL.
xploited said:
Not pudding, I meant SBF flash full stock 2.2.2 rom.
BUT YOU CAN ONLY DO IT IF YOU HAVEN"T UPGRADED TO OFFICIAL OTA 2.3.4!
Or you will HARD BRICK! LOL.
Click to expand...
Click to collapse
guess that's a little moot in this case since he's sending it back to motorola anyways lol
The other suggestion is to sbf flash the 2.3.4 sbf, still may risk hard bricking since it's not really confirmed if it's safe since most of the hard bricks have from sbfing backwards.
xploited said:
Not pudding, I meant SBF flash full stock 2.2.2 rom.
BUT YOU CAN ONLY DO IT IF YOU HAVEN"T UPGRADED TO OFFICIAL OTA 2.3.4!
Or you will HARD BRICK! LOL.
Click to expand...
Click to collapse
Lol hes returning back to Moto anyways ha ha! I'll try it out, I fastbooted to Gingerbread (via Kenn) So I never did the OTA.... so I guess I am safe.
Per this post, you can tell if you've flashed OTA 2.3.4. If it has been flashed already, then DO NOT downgrade to a official 2.2.2 build.
mysticdrew said:
guess that's a little moot in this case since he's sending it back to motorola anyways lol
The other suggestion is to sbf flash the 2.3.4 sbf, still may risk hard bricking since it's not really confirmed if it's safe since most of the hard bricks have from sbfing backwards.
Click to expand...
Click to collapse
Its safe. I have done it. U can sbf the 2.3.4 (4.5.91) over 2.3.4 (4.5.91) even after ota. I used the pudding sbf and did not brick my phone. Even still, same rules apply, your risk.
My overclocked alien atrix
Sass86 said:
Its safe. I have done it. U can sbf the 2.3.4 (4.5.91) over 2.3.4 (4.5.91) even after ota. I used the pudding sbf and did not brick my phone. Even still, same rules apply, your risk.
My overclocked alien atrix
Click to expand...
Click to collapse
Yeah but doesn't using the pudding 2.3.4 (4.5.91) still makes you have the "Unlocked" thing on the boot setting? which is what the OP wants to avoid so if he takes it to like AT&T if they see it and see Unlocked they will void the warranty, I am pretty sure the retail story wont extract his phone to see if the fuse it sparked and unlocked.
Thanks for the replies, guys. I basically need to get back to 2.3.4 with no "unlocked" logo on boot. I'm pretty sure they won't go and check bootloader status for touchscreen issues (I hope).
If I sbf the factory 4.5.91 will it remove the unlock logo and restore webtop, etc?
If I flash the fruitcake version, does that get rid of the unlock logo?
I guess that's my main concern so I can return for repair, just getting it back to appear normal. Thanks again.
RampageRR said:
Thanks for the replies, guys. I basically need to get back to 2.3.4 with no "unlocked" logo on boot. I'm pretty sure they won't go and check bootloader status for touchscreen issues (I hope).
If I sbf the factory 4.5.91 will it remove the unlock logo and restore webtop, etc?
If I flash the fruitcake version, does that get rid of the unlock logo?
I guess that's my main concern so I can return for repair, just getting it back to appear normal. Thanks again.
Click to expand...
Click to collapse
I am not sure about the sbf, but I can tell you for sure fruitcake will not get rid of the unlock logo, flashing a fruitcake is only a stock ROM.
RampageRR said:
Thanks for the replies, guys. I basically need to get back to 2.3.4 with no "unlocked" logo on boot. I'm pretty sure they won't go and check bootloader status for touchscreen issues (I hope).
If I sbf the factory 4.5.91 will it remove the unlock logo and restore webtop, etc?
If I flash the fruitcake version, does that get rid of the unlock logo?
I guess that's my main concern so I can return for repair, just getting it back to appear normal. Thanks again.
Click to expand...
Click to collapse
No. Only if you haven't upgraded via ota update. If you did, then there is no way of removing "unlocked" yet.
My overclocked alien atrix
RampageRR said:
Thanks for the replies, guys. I basically need to get back to 2.3.4 with no "unlocked" logo on boot. I'm pretty sure they won't go and check bootloader status for touchscreen issues (I hope).
If I sbf the factory 4.5.91 will it remove the unlock logo and restore webtop, etc?
If I flash the fruitcake version, does that get rid of the unlock logo?
I guess that's my main concern so I can return for repair, just getting it back to appear normal. Thanks again.
Click to expand...
Click to collapse
Just a thought... did you ever back up your PDS partition?
Touchscreen issues sometimes are due to pds issues. If you have made a backup, wouldn't be a bad idea to try restoring it to see if that fixes your issue.
If you didn't back it up, take a look at this thread with a pds file that helped others.
http://forum.xda-developers.com/showthread.php?t=1131649
RampageRR said:
Hi guys, posting for my wife here. She has an Atrix, running Cherry Pi 0.7 currently (unlocked bootloader, romracer recovery, etc). The touchscreen is completely borked, doing all kinds of weird things. I know it's a hardware issue, i have tried flashing 3 different roms, 4 different keyboards, and multiple wipe/reinstalls of roms. Always does the same stuff with the touchscreen - not responding to input, random multiple presses of qqqqqqqq when trying to type, soft buttons not working, etc.
i want to return the phone to complete stock so i can send it in to Motorola to be either repaired or exchanged. I cannot find any insrructions for this for an AT&T Atrix. How can i get back to stock os, factory recovery, and locked bootloader like when it was new? I tried search, but cant find exactly what im looking for. Can someone help me out, please? Thanks.
Click to expand...
Click to collapse
Probably a long shot but, I used to have very similar issues with other phones in the past when I've had a screen protector on for awhile and it gets scratched up. Maybe try remove the screen protector if there is one and see what happens.
If it is going back for repair. why not intentionally hard brick it? The first thing they will do is the full blown factory flash, erasing all evidence.
If you do this, make certain you give them a story that somehow describes both the actual problem and the bricked condition (else they might think the un-bricking fixed it and not catch the other issue.
EDIT: Maybe not all evidence, the fuse that was blown when you unlocked a 2.3.4 might be a real hardware type fuse and never be cleared. Don't know.
My device is doing this exact same thing and I'm in the same position you are in. I never backed up the PDS partition, but a backup using the image in the linked thread did not solve the problem. Nor did flashing multiple new ROMs.
I'm not sure if this is a hardware or software problem. It problem seems to go away if you lock the screen a few times, but then later reapers.
Sorry to hijack this thread, but does anyone know if replacing the digitizer will fix this problem? Since I'm in New Zealand this would be an economic solution as shipping to and from the US is pricey.
RampageRR said:
Thanks for the replies, guys. I basically need to get back to 2.3.4 with no "unlocked" logo on boot. I'm pretty sure they won't go and check bootloader status for touchscreen issues (I hope).
If I sbf the factory 4.5.91 will it remove the unlock logo and restore webtop, etc?
If I flash the fruitcake version, does that get rid of the unlock logo?
I guess that's my main concern so I can return for repair, just getting it back to appear normal. Thanks again.
Click to expand...
Click to collapse
Ok, I have the same issue as you, I was able to fix the "unlocked" logo ( I havn't taken it back to AT&T yet for warranty, but I will update when I do). So this is what I did, when I upgraded to 4.5.91 I fastbooted it instead of OTA or flashing it, I also unlocked my bootloader by using pudding. Assuming if you did the same, then will be able to flash the official 4.5.91 via SBF ( I wasnt going to try 1.8.3 because I didn't want to risk the brick). I got the 4.5.91 sbf from this link: http://forum.xda-developers.com/showthread.php?t=1125944 ... My phone is still rooted, but the "unlocked" logo is now gone and I flashed fruitcakes so It looks completly stocked now! I hope this helps, I dont think you will fool motorola if you send it in for repairs, but I am pretty sure you can get by with that if you have to return it to the store for warranty reasons! Good luck : )
Pizzaapu said:
Ok, I have the same issue as you, I was able to fix the "unlocked" logo ( I havn't taken it back to AT&T yet for warranty, but I will update when I do). So this is what I did, when I upgraded to 4.5.91 I fastbooted it instead of OTA or flashing it, I also unlocked my bootloader by using pudding. Assuming if you did the same, then will be able to flash the official 4.5.91 via SBF ( I wasnt going to try 1.8.3 because I didn't want to risk the brick). I got the 4.5.91 sbf from this link: http://forum.xda-developers.com/showthread.php?t=1125944 ... My phone is still rooted, but the "unlocked" logo is now gone and I flashed fruitcakes so It looks completly stocked now! I hope this helps, I dont think you will fool motorola if you send it in for repairs, but I am pretty sure you can get by with that if you have to return it to the store for warranty reasons! Good luck : )
Click to expand...
Click to collapse
I just saw this. I ended up using the stock 2.3.4 sbf, and then doing a factory reset in the privacy menu. Now has all the stock info in the "about phone" section. I'll let you all know how it goes. Thanks for the suggestions.
Just got back from AT&T! they said it was a software issue! They gave me the warranty and gave me a refurbished Atrix with 1.8.3, stock froyo on it! I'll stay OTA until CM7 comes out of pre-beta then see how to root it after OTA : )
Hi,
I've got a .DE Atrix, updated via MSU to 2.3.4
The update operation failed two times and I've got an half updated phone.
Then I've successfull updated the phone on the third time.
I don't know if all the failed attemps could have created a corrupted firmware (the atrix works well but it seem a little "sluiggish), so I've thinked to reflash the 2.3.4 sbf .DE to my phone via RSD. What do you think?
Hello,
I think it's hard to made a "corrupted firmware" with SBF...
What do you mean by "sluggish" ? Fluidity, data connexion speed...?
Where did you want to use this Atrix ?
There (http://forum.xda-developers.com/showthread.php?t=1125944) you can found all what you need.
Come back if you need !
Regards.
The GUI is not fluid as expected, the phone is really fast but it lag sometimes.
I've write "corrupted" because, on the first failed flash, the atrix rebooted with 2.3.4 os but with the old radio, for example.
Anyway, I've the SBF for my Phone (the 2.3.4 .DE Retail from the link you give me), do you think I could encounter issue if I'll flash it with RSD?
Ty a lot!
There wont be an issue if the. Sbf is for your model. And DON'T flash back to a previous version of android or you'll hard brick.
Sent from my MB860 using Tapatalk
I got It!
I'll try and I'll tell you the result!