Ok I got The recent Flash back rom installed and running nicely on GTab
Only a couple application issues.
Mobile biz pro force close - resolved by going back 1 version.
But hbo go and max go won't work, I had them running under Cyangen mod 7.03
through using a tool to create and upload an Imie Identifier but I have been unable to locate that same tool again, and I don't know if it will work with Flashback.
Any pointers would be helpful
I'm not getting FC issues I'm getting incompatible application message.
Found Dizzy's Imei generator but no luck same issue, Should I try editing the build prop? if so to what?
They have fixed that issue with HBO Go and Max Go where you do not need the IMEI spoof now. They have also updated the apk where it currently only runs stable on Froyo Roms right now also. You can upload it to a 2.3 rom but it will get stuck in a buffering loop. I went ahead and bit the bullet and flashed back to Beast 2.2.1. Works fine with that and also works great on Century Eyes.
Thanks for the Info, I'm really liking flash Back 10.0, and really don't amt to roll back
I installed the HBO GO application on Honeycomb 3.0 (Flashback).
When I start the HBO GO application, I receive the error:
"HBO GO is not supported on this device"
Does anyone have a solution to fix this problem?
Related
Please delete posted in incorrect section. thanks....
Hello, Have G tab with vegan 2.2 on it.
Tried honeycomb and never came out of boot up.
Went back and restored to paste vegan tab rom and everything was good but market. Tried market fix numerous times. Reloaded romserveral times market fixes. Still market will not update present apps or download new free ones even.
what it does do..
when you start to download if flashes downloading
then it flashes downloading paused.
then downloading failed and stops all together.
any thoughts or fix?
tablet details:
Vegan tab -v1.0.0b5.1
android version 2.2
kernal 2.632,9-dirty [email protected]#6
cwm recovery 2.5.1.8
rom manager ver 3.0.1.4
thanks, layback
I would wipe and reflash VEGAn from scratch.
layback62 said:
Please delete posted in incorrect section. thanks....
Hello, Have G tab with vegan 2.2 on it.
Tried honeycomb and never came out of boot up.
Click to expand...
Click to collapse
I think we'd have a better chance at helping you if you make a little more sense. Tried honeycomb? Vegan 2.2?
I highly recommend calkulin's rom. Market comes fully fixed for you.
history
Had vegan tab running good with working market.
Tried going ti vegan honeycomb.
Never came out of boot up 20 minutes.
Went back and loaded vagen 5.1 stable works but now with market issue.
Using cwr for installs.
Did marketfix several times all apps display
When you download it goes downloading
Downloading paused
Downloding
Then stops without any action like download complete itjust stops.
This is with purschased app or free ones.
Thanks layback
update
layback62 said:
Had vegan tab running good with working market.
Tried going ti vegan gingerbread.
Never came out of boot up 20 minutes.
Went back and loaded vagen 5.1 stable works but now with market issue.
Using cwr for installs.
Did marketfix several times all apps display
When you download it goes downloading
Downloading paused
Downloding
Then stops without any action like download complete itjust stops.
This is with purschased app or free ones.
Thanks layback
Click to expand...
Click to collapse
Corrected version above....
1: uninstall flash if installed
2: install BRDizzled version for Flash 10.3.185.22 optimized for tegra hardware acceleration
3: Open browser and type about:debug in the browser and hit enter
4: Open settings and go to debug option
5: change ua striang to desktop
6: you need to restart or task kill browser
7: Enjoy Hulu
Sweet. Thanks man. Looks pretty good...watching a movie right now
Now its time for Netflix
Hmm...it was working fine before I rebotted. Now hulu telling me that my flash player is outdated.
I actually installed this right out of the box before I even got the stock flash apk. It didn't work for me, said my flash player was out of date also.
Got the same flash needs to be updated error. Would love to have hulu running on this bad boy!
+1....not working after reboot.
I think I know what happened. I uninstalled the latest flash version...installed this one...and just hit up netflix. It was probably getting the latest version number...but the files belonged to the old player.
Gonna try to recreate it.
I'm getting the same error as well.
Says my flash player is out of date
"hulu requires flash player 10.0.32 or higher"
I will look for a way to fake version number.
Edit: I never installed flash from the market and its still working after reboot. Must be something left over from original version that updates the version number.
Working fine. I just uninstalled flash then installed the click.apk. I did not reboot.
Note: I already had my striang set to desktop before uninstalling.
Thanks!
Sent from my GT-P7510 using XDA Premium App
This is awesome!!! Hulu working!!! I wonder how long this will work...hopefully it will not get "fixed" on Hulu's end.
Thanks for the info!
I removed the original working flash, and used the version in the first post, I get the wrong version of flash error (hulu worked for me with the marketplace flash.. just laggy)
my about:debug doesn't work for me
when i try to use Dolphin Browser it tells me not for my device even though I changed the user agent to desktop
It works perefect for me even after reboot. I never installed market version of flash. I am going to have working hulu in my rom and hope that will fix it for u guys that get errors.
you just gave me raging wood.
Very new 10.1 owner here. I haven't installed ANYTHING from market as I just got my tablet about an hour ago. Installed apk from first post, did about:debug + settings + desktop ua, rebooted my tablet, and it's as if I don't even have flash. Even adobe's flash test pages tell me I don't have flash installed.
shep211 said:
It works perefect for me even after reboot. I never installed market version of flash. I am going to have working hulu in my rom and hope that will fix it for u guys that get errors.
Click to expand...
Click to collapse
when are you planning this release and what will be addressed first in this rom?
keyboard lag?
reboot options? i.e recovery, reboot, poweroff, bootloader options?
flash 4 nv
just curious and excited thx
After you type about:debug in browser and hit enter you select settings in the top right and will notice the debug setting there.
Sent from my GT-P7510 using XDA Premium App
Too bad anything flash I run on my SGT10.1 runs at like 5 fps.. pretty unwatchable for me.. anybody else having better luck? My HTC cellphone runs Flash wayyyy better than the SGT10.1 does so far :/
I wanted to report some feedback on installing RevolutionRom JVQ. I have been most lurking so didn't have posting privileges to post in the development forum under the release.
I have been experimenting with various ROMS since I acquired my Vibrant last July. I installed Revolution ROM Beta 2 and was blown away by both the speed of the system but by the great battery life, the best I have tested to date on any ROM.
I was very excited to install the final version released yesterday.
From RevolutionROM JVQ beta 2 I updated with CWM with the both wipe and non wipe versions. The end result was boot looping.
I returned to stock using ODIN and tried again with the same result (From stock -> rooted, installed ROM manager and flashed CWM to ROM, installed wipe ROM version).
I returned to stock and used ODIN to flash the Final version with GB bootloader. This booted properly but I received mail forced closed message.
From this I finally installed with CWM the final version without Wi-Fi calling. This seems to be working properly without any noted difficulties. I'm still restoring apps with titanium backup but so far everything is working without a hitch.
I noticed that other users have posted similar results. http://forum.xda-developers.com/showpost.php?p=16147594&postcount=92
ali1276, I wanted to thank you for this awesome release. You may however want to reevaluate the wi-fi calling versions of your ROM. I think there's something wrong that's causing the phone to boot loop.
So you flashed the wi-fi calling one. Ok, I will probably fix and repost it today.
Sent from my GT-I9000 using XDA Premium App
Problem with system rebooting
In comparison with the JVQ Beta 2 the final Revolutionrom update 2 is constantly crashing and rebooting. Happens either while phone is on standby, playing music but has also happened in the middle of a call. I don't think the BT issue has been completely resolved with update 2. Sometimes it requires a reboot to get it to work, sometimes event that doesn't work.
I flashed back to beta 2 which in my opinion seems to be working a bit better. BT works from initial bootup and I'm not experiencing any system crashes.
I think I have identified a bug on the dialer (in the JVQ beta 2).
when you use the dialer to call a number you have stored on speed dial, lets' say you press 3 and dial instead of dialing that number a window opens that says:
"USSD code running....."
then an error window appears:
"Connection problem or invalid MMI code. "
If you dial the same number using the contact or just dialing the numbers the call goes through normally.
Despite these glitches, I love this ROM. It's fast, great on battery life. Over 50% at the end of a busy day. Not sure I have seen that even on stock firmware. Hope these glitches get ironed out.
Hello Forum,
I'm having a difficult time with my retail 10.1 wifi tab. I had previously rooted using odin and instructions on a website so that I could load an altered wpasupplicant file. However, I noticed that touchwiz ux wouldn't install yesterday (it would download, restart, get to 13%, then boot and tell me the update failed; happened many times).
So, I unrooted using this method:
"watch?v=xiSXcMbYqfs" (comes after the slash in a youtube.com url, I can't post links apparently)
and did a factory reset. When I went to update, it loaded "P7510UEKG4" (the 11 something mb update), which provided me with a "movies" program. I was under the impression that this update was for the I/O tab, which I don't have. Now, the touchwiz update is unavailable.
Can someone explain to me (or direct me to a site to) return my retail tab back to 100% stock settings? I don't know what is going on with it, but I just want it back to how it came to me.
Thanks!
Jim
focusbob said:
Hello Forum,
I'm having a difficult time with my retail 10.1 wifi tab. I had previously rooted using odin and instructions on a website so that I could load an altered wpasupplicant file. However, I noticed that touchwiz ux wouldn't install yesterday (it would download, restart, get to 13%, then boot and tell me the update failed; happened many times).
So, I unrooted using this method:
"watch?v=xiSXcMbYqfs" (comes after the slash in a youtube.com url, I can't post links apparently)
and did a factory reset. When I went to update, it loaded "P7510UEKG4" (the 11 something mb update), which provided me with a "movies" program. I was under the impression that this update was for the I/O tab, which I don't have. Now, the touchwiz update is unavailable.
Can someone explain to me (or direct me to a site to) return my retail tab back to 100% stock settings? I don't know what is going on with it, but I just want it back to how it came to me.
Thanks!
Jim
Click to expand...
Click to collapse
Exact same position as you.
I tried the OTA 3.1 (KF3) and only got 11mb update that locked the bootloader.
I am currently trying to go back to 3.0 then update.
same thing happened to me and I have not found a solution sadly. i just installed the rom posted for UEKMB as that puts you back on a retail ver. just it is rooted and such.
I'm back at 3.0.1 but still can't get an update using kies and through settings
I was in the exact position also. Reinstalled CWM, installed stock ROM with TW-rooted, from this post:
http://forum.xda-developers.com/showthread.php?t=1198921
Everything is perfect. Movies show up in market, Netflix still works perfect. This is how Samsung should have released this tablet. I really like TW and the additional apps preloaded (swype, media hub, etc...)
I'm in the same boat as well. B00sted, did that rom you mentioned work for you? Where did you get it if it did.
Sent from my Nexus S using Tapatalk
gpgofast said:
I was in the exact position also. Reinstalled CWM, installed stock ROM with TW-rooted, from this post:
http://forum.xda-developers.com/showthread.php?t=1198921
Everything is perfect. Movies show up in market, Netflix still works perfect. This is how Samsung should have released this tablet. I really like TW and the additional apps preloaded (swype, media hub, etc...)
Click to expand...
Click to collapse
I guess I'm gonna have to use this, I just wanted to go back to stock so i could get OTA updates without hassle.
I felt the same way also, but with the eaze of using Clockwork Mod, this is really a non issue for me anymore. This is the first Android device I've doing any hacking on and it is so easy I will probably do my HTC Incredible soon.
Thanks gpgofast, I took the route you suggested. Everything's in order. Only problem is that now my wpa_supplicant replacement doesn't work and I can't connect to my droid's ad hoc network (which is why I rooted the tab in the first place). Oh well, that's a topic for a different thread.
Thanks,
Jim
Why don't you just load up the this stock rooted rom and use Netflix, Samsung Media Hub(Google market movies) and your wpa_supplicant.?
ALso,here is the stock firmware that Samsung provides go to bottom of page for all the info you need. You could also go to the first post in Galaxy Tab 10.1 Android Development and go to this link from there. Its in big red words after the CWM recovery menu list.
Hi tdavis, that's what I did (loaded up the stock rooted rom at the link you pasted, and replaced the stock wpa_supplicant). When I do this, wifi won't start, it says "error". Maybe it's a touchwiz thing? The wpa_supplicant I used was created pre-touchwiz. Here it is:
http://forum.xda-developers.com/archive/index.php/t-1083182.html
Note: this worked just fine when I was using a previous (non-touchwiz) stock rooted rom. This was the previous rooting method I used:
http://www.youtube.com/watch?v=krQDP7xYlWg
Any thoughts?
One other thing... I did load the stock rom that you mentioned in the second part of your post. With it, I couldn't get the touchwiz update, which is why I installed the stock rooted touchwiz rom you mentioned.
OK, nevermind, the modified wpa_supplicant works fine on the stock rooted touchwiz rom
If you find yourself in the same position as me, remember you have to change the permissions for the new wpa_supplicant file so that it can execute. Also remember to put your tab in airplane mode while swapping the file, and to restart when you're done. (I didn't change the file as suggested by the original poster, I just used root explorer to swap the file).
As noted by the original poster of the wpa_supplicant file, after you disconnect from an adhoc network, you should restart wifi (or else you can't connect to other networks, at least I couldn't). You may also have to "forget" your ad-hoc network before you connect to that network on subsequent occasions (had to do this on the last stock rooted rom, haven't tried on this one yet, but assume it's the same). Small price to pay, works great.
Thanks everyone, thread SOLVED.
Nice. Glad you got it working. I hardly get an answer from one person its always a pieced together answer.
I NEED HELP!
Backstory: I was on Abberation rom 1.2 and it had worked perfectly. When I installed version 1.0 it used the AROMA installer and allowed me to pick a launcher. I chose Apex launcher but I didn't install any other launchers. Superuser worked fine and it had run buttery smooth. Aberration runs Siyah kernel.
The issue: Alright, so today I was listening to music and suddenly my phone turns off. I literally was listening to music and that's it. I rebooted it and it told said "please wait android is updating" and that only happens when I flash a new kernel...which is impossible since I don't even have mobile odin installed. Then, Then it said "unfortunately, apex launcher has closed" and it would keep repeating that message, meaning I had no actual launcher to run anything from. I installed launcher pro over the air via the play store desktop version from my computer. It downloaded but wouldn't run. I got a text from my friend and the messaging app worked fine, I could text him and everything so there was nothing wrong there. Then I get home and let it charge (since it was dead). I return later and see that the battery icon that pops up when its charging and the phone is off has a loading icon on it, but it doesn't actually show the battery level. I tried to boot up, but it wouldn't. It would show a blank screen and then go back to the battery icon with a loading symbol on it. Eventually I tried to go to CWM via the three button combo and I ended up with the stock 3E recovery. I am utterly confused and need some serious help from you guys. I didn't do anything so is it the ROM's fault?
Note: I have had experience in flashing ROMs and I have done extensive research on trying to fix this. I've never seen this happen before. Did it somehow revert back to the stock kernel while it ran Aberration?
Thanks for any support or instructions you can give me. I was thinking about using creepyncrawly's instruction to unroot to stock, but it only works for gingerbread and I'm on ice cream sandwich.
shadowskorch said:
I NEED HELP!
Backstory: I was on Abberation rom 1.2 and it had worked perfectly. When I installed version 1.0 it used the AROMA installer and allowed me to pick a launcher. I chose Apex launcher but I didn't install any other launchers. Superuser worked fine and it had run buttery smooth. Aberration runs Siyah kernel.
The issue: Alright, so today I was listening to music and suddenly my phone turns off. I literally was listening to music and that's it. I rebooted it and it told said "please wait android is updating" and that only happens when I flash a new kernel...which is impossible since I don't even have mobile odin installed. Then, Then it said "unfortunately, apex launcher has closed" and it would keep repeating that message, meaning I had no actual launcher to run anything from. I installed launcher pro over the air via the play store desktop version from my computer. It downloaded but wouldn't run. I got a text from my friend and the messaging app worked fine, I could text him and everything so there was nothing wrong there. Then I get home and let it charge (since it was dead). I return later and see that the battery icon that pops up when its charging and the phone is off has a loading icon on it, but it doesn't actually show the battery level. I tried to boot up, but it wouldn't. It would show a blank screen and then go back to the battery icon with a loading symbol on it. Eventually I tried to go to CWM via the three button combo and I ended up with the stock 3E recovery. I am utterly confused and need some serious help from you guys. I didn't do anything so is it the ROM's fault?
Note: I have had experience in flashing ROMs and I have done extensive research on trying to fix this. I've never seen this happen before. Did it somehow revert back to the stock kernel while it ran Aberration?
Thanks for any support or instructions you can give me. I was thinking about using creepyncrawly's instruction to unroot to stock, but it only works for gingerbread and I'm on ice cream sandwich.
Click to expand...
Click to collapse
If you have 3e recovery, then I suppose you have the stock kernel. I have no clue how you would have 3e recovery any other way.
I would suggest you flash back to stock and start over. It doesn't matter that you flash back to Gingerbread, because you will install a custom Gingerbread kernel and then flash whatever you want. I would suggest that you use UCKH7 plus root, and then put a Gingerbread kernel on it. Oh, and just in case, do the wipe data/factory reset in 3e recovery after you flash UCKH7, just in case, you know.