Hello to everyone! I am having a problem with the Revolution HD Custom Rom.
I am coming from the latest Leomar Rom, I did full wipe (except from the sd card), I installed Revolution HD from zip, but when I am rebooting, it keeps booting on clockwork and not on the OS itself. What is the problem? Any ideas?
Android_GR said:
Hello to everyone! I am having a problem with the Revolution HD Custom Rom.
I am coming from the latest Leomar Rom, I did full wipe (except from the sd card), I installed Revolution HD from zip, but when I am rebooting, it keeps booting on clockwork and not on the OS itself. What is the problem? Any ideas?
Click to expand...
Click to collapse
Go into cwm
Do a /data wipe aka factory reset
flash the checkromRevolutioHD.zip
Reboot
Problem solved!
I don't get it, I did that and nothing happened...
Q: I'm coming from a different ROM how can i install this ROM ?
A: Follow the steps below
Get into the CWM recovery
Wipe Data/factory reset
Wipe Cache
Wipe Dalvik-Cache
Wipe Battery Stats
Wipe Data/factory reset
Wipe Cache
Wipe Dalvik-Cache
Wipe Battery Stats
Install the wipe version of this ROM
Click to expand...
Click to collapse
But your advice made it work, thanks!
Related
Hi guys.
I am using cm7.1 right now, and i have problem when i flash new cm 7.2
problem is, after i install zip of cm7.2 from sd, reboot, and then, it stuck at ANDROID words. i using cwm5. so, if i need to wipe after install rom,
what kind of wipe?
wipe data/ factory reset?
wipe cache partition?
wipe dalvik cache?
or all of them?
or anything that i miss?
tenkiu
Make only wipe data/ factory (it's include the wipe dalvik cache) and cache.
dragonnn said:
Make only wipe data/ factory (it's include the wipe dalvik cache) and cache.
Click to expand...
Click to collapse
thank you
so, that kind of stuck will happen if we skip the wipe?
vocyber said:
thank you
so, that kind of stuck will happen if we skip the wipe?
Click to expand...
Click to collapse
It's possible to get bootloop when changing rom's, but I have successfully upgrade form CM 7.1 to 7.2 without wipe.
Im currently using ver1.0 Pro but cannot seem to download any other versions after that.
I tried even Infinitum Project, i cant seem to get it pass the start screen.(meaning before the boot animation). Similar when flashing RR ver1.1 onwards
I think i cannot go anywhere after android 4.0.4. I am only able to flash back to v1.0 (Android 4.0.3).
what could be the problem? help?
can u explain the process you followed for the installation of the other roms after 1.0?
oh sorry.
For the RR Pro 1.3
full wipe
installed rom
reboot.
Infinatium project,
Full wipe
installed rom
installed gapps
installed themed gapps
reboot.
I would usually just follow the instructions that are given.
sorry too I were configuring my cellphone, just flashed to the 1.3 and works fine...
sometimes my sd card give me problems and I remove from the device, maybe it's not your case...
and additional to the wipe, I wipe the dalvik cache, and then install the rom.
In the roms in wich I got troubles with the start screen or rebooting its because the baseband (LPQ in my case) and I'm serching foward about these thing...
sorry about my english, but its not my native languaje
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
jonsim86 said:
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
Click to expand...
Click to collapse
Apart from asking the dev i suggest a full wipe and clean flash may cure the usual Kernel Panic .
jje
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
jonsim86 said:
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
Click to expand...
Click to collapse
wipe data,cache,dalvik cache and format system from mount and storage.
after installing also wipe cache and dalvik cache then reboot.hope this solves ur problem.
meaning to say i should delete everything in my storage and sd card? like format the memory?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
formatting system doesn't format ur sdcard data, it only
formats system folder.
sorry im quite a noob so... how do i format the system?
jonsim86 said:
sorry im quite a noob so... how do i format the system?
Click to expand...
Click to collapse
go to recovery mode then mount and storage and select format system.
giving it a try. Thanks
i just cant seem to install anything after v1.
from v1. siyah kernel v3.
did a data wipe
cache wipe
format system
divak wipe
install rom
install gapps fix
reboot
it just get stuck at start up before the bootanimation. why?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
yeap it just clears the system data, then you can do a clean flash from there. that should do it
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
jonsim86 said:
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
Click to expand...
Click to collapse
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Azure Flame Kite said:
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Click to expand...
Click to collapse
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
MyLifeRocks10 said:
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
Click to expand...
Click to collapse
If you just relax for a minute , take a deep breath and start from the beginning. Listen to what people are telling you. Follow step by step from the beginning. Read what the developer says on flashing the rom and then it will work. Almost impossible not to get the rom working after that. It will all come together mate. Read a lot of posts. Good luck.
Sent from my GT-I9100 using xda premium
installing cm9 rom when im done installing i get unfortunately.the processcom.android.phone has stopped. i re downloaded. wipe data/factory reset, format system, wipe dalvik cache. help please.
deathbeah said:
installing cm9 rom when im done installing i get unfortunately.the processcom.android.phone has stopped. i re downloaded. wipe data/factory reset, format system, wipe dalvik cache. help please.
Click to expand...
Click to collapse
Full wipe flash ROM twice
Same issue as OP, proposed solution doesn't help
The flash twice method has never worked for me. But what will always work without fail is flashing 3.1, booting into it, reboot to recovery, wipe cache/dalv and flash the newest.
Sent from my CM7ed out Mopho!
hi i have galaxy sii gt i9100 everytime i flash a new rom or or update a rom using cwm and restart it my phone hangs at startup everytime and starts only when i wipe my data...any idea whats happening? plz help
Hey
wich rom did u flash?
Have you already tried to whipe the cache partition in cwm?
jiffer1991 said:
Hey
wich rom did u flash?
Have you already tried to whipe the cache partition in cwm?
Click to expand...
Click to collapse
happens with almost every rom...i've tried everything wipe data/factory reset, wipe cache, wipe dalvik nothing works!!
Do you wipe data,cache and dalvik before flashing?
Try to wipe data,cache and dalvik after you installed a Rom
olawp said:
Do you wipe data,cache and dalvik before flashing?
Try to wipe data,cache and dalvik after you installed a Rom
Click to expand...
Click to collapse
done that doesn't work!
Does it start normally after you wipe after you flashed?
I would try to flash stock 2.3.5 GB or 4.0.3 ICS with stock recovery and the flash cf root with odin.
Try this and then try flashing some roms
Hi,
I was using stock firmware up until yesterday I flashed to v5.2 successfully. Everything is working fine. But I just have a question, I remember that after the flash, and the phone rebooted and I connected to my wifi...the phone automatically started to download and install all the 4 apps that i had personnally installed on the stock firmware all by itself ..
I'm asking because I see that there a v6.0 available and would like to flash that. But before I flash, do I need to do the following wipes?
Wipe data/factory reset
Wipe Cache
Wipe Dalvik Cache
If so, do I need to do this for between EVERY Omega flashes to ensure it goes smoothly? Thanks
NocNoc9595 said:
Hi,
I was using stock firmware up until yesterday I flashed to v5.2 successfully. Everything is working fine. But I just have a question, I remember that after the flash, and the phone rebooted and I connected to my wifi...the phone automatically started to download and install all the 4 apps that i had personnally installed on the stock firmware all by itself ..
I'm asking because I see that there a v6.0 available and would like to flash that. But before I flash, do I need to do the following wipes?
Wipe data/factory reset
Wipe Cache
Wipe Dalvik Cache
If so, do I need to do this for between EVERY Omega flashes to ensure it goes smoothly? Thanks
Click to expand...
Click to collapse
You should only have to wipe cache and dalvik then flash the ROM. You'll be fine, I also always format cache and system in the mount and storage part of Cwm recovery BEFORE flashing the ROM, never had an issue.
bungknees said:
You should only have to wipe cache and dalvik then flash the ROM. You'll be fine, I also always format cache and system in the mount and storage part of Cwm recovery BEFORE flashing the ROM, never had an issue.
Click to expand...
Click to collapse
Is that considered a FULL wipe?
NocNoc9595 said:
Is that considered a FULL wipe?
Click to expand...
Click to collapse
No, full wipe is when you delete all user data as well.
bungknees said:
No, full wipe is when you delete all user data as well.
Click to expand...
Click to collapse
Ok I found the definitions of what a full wipe and no wipe is:
Full Wipe Install means:
- Wipe Data / Factory Reset
- Wipe Cache and Dalvik Cache
- Format System partition
- Install
No Wipe Install means:
- Wipe Cache and Dalvik Cache
- Install
Just a question, in the FULL WIPE listed above, where would I find "Format System Partition?" I don't recall seeing that..which category do I enter to do it?
CWM recovery mounts and storage format system .
jje
JJEgan said:
CWM recovery mounts and storage format system .
jje
Click to expand...
Click to collapse
Thanks, is there any harm if I do a full wipe EverytimeI upgrade an Omega ROM? I just want to stick to one way of things to minimize any issues.