Cant root this.damn stock phone !?!? I flashed azuzu downgrade took off usb felt the vibration then quickly reinserted usb nothing in flashtool happens !?! No log nothing and my phone just stuck at se logo tried 2 diff comp 3 diff flashtool i tried gingerbreak aswell @@ I TRIED FLASHIN 2.1 AND ROOT FROM THERE EVERYTHING. BOOTS UP BUT UNKNOWN BASEBAND ISSUE SO I REFLASHED ALL THE COMPATIBLE BASEBANDS STILL NOTHING [email protected]@@ OMFG IM GOING NUTS NOW I TRIED ON GB DOWNGRADE THE BLOODY KERNEL SAME THING REINSTALLED OLD DRIVERS NOTHING TRIED NEWS ONE NOTHING 4TH PC IM TRYING FFS !
Sent from my X10i using xda premium
Sent from my X10i using xda premium
you can try Doomlord's [RECOVERY image] {v2} X10 GB 3.0.1.G.0.75 [Prerooted + Fixed xRecovery]
i used this all the time
Arnold.Alexius said:
you can try Doomlord's [RECOVERY image] {v2} X10 GB 3.0.1.G.0.75 [Prerooted + Fixed xRecovery]
i used this all the time
Click to expand...
Click to collapse
Thanks for willing to help mate but in order to do the following i need to get root right ? That is my problem well at first i restored a 2.1 rom whit a baseband 71 that got me into bootloop flashed back to 2.3 now can't root :/
Sent from my X10i using xda premium
not necessary. as long you got working xrecovery. if you are unlocked bootloader, try to flash doomlord's boot manager and access xrec from there to flash that prerooted 2.3.3 image. but do your phone is unlocked bootloader?
but when i read your op again, it seem you are saying
shahkam said:
I flashed azuzu downgrade took off usb felt the vibration then quickly reinserted usb nothing in flashtool happens !?! No log nothing ...
Click to expand...
Click to collapse
the phone should be off and during the inserting the USB, you need to hold back and release the button if flash tool already detected the phone (phone still off...not on or booting )
i hope this helpfull...good luck mate
Arnold.Alexius said:
not necessary. as long you got working xrecovery. if you are unlocked bootloader, try to flash doomlord's boot manager and access xrec from there to flash that prerooted 2.3.3 image. but do your phone is unlocked bootloader?
but when i read your op again, it seem you are saying
the phone should be off and during the inserting the USB, you need to hold back and release the button if flash tool already detected the phone (phone still off...not on or booting )
i hope this helpfull...good luck mate
Click to expand...
Click to collapse
Didnt know this ! ;o gonna try it buddy !
Sent from my X10i using xda premium
Arnold.Alexius said:
not necessary. as long you got working xrecovery. if you are unlocked bootloader, try to flash doomlord's boot manager and access xrec from there to flash that prerooted 2.3.3 image. but do your phone is unlocked bootloader?
but when i read your op again, it seem you are saying
the phone should be off and during the inserting the USB, you need to hold back and release the button if flash tool already detected the phone (phone still off...not on or booting )
i hope this helpfull...good luck mate
Click to expand...
Click to collapse
So basicly i unplug then replug in flasg mode ? Or i wait for vibration hold back key and insert USB ?
Sent from my X10i using xda premium
Please follow the guide that is given. Just like normal flashing, the phone must be off (or you can take out your battery to make sure it's off). Before you plug the USB, hold back button and insert the USB on phone. Release oback button after flashtool detect your device.
Sent from my washing machine using XDA Premium
Arnold.Alexius said:
Please follow the guide that is given. Just like normal flashing, the phone must be off (or you can take out your battery to make sure it's off). Before you plug the USB, hold back button and insert the USB on phone. Release oback button after flashtool detect your device.
Sent from my washing machine using XDA Premium
Click to expand...
Click to collapse
Gonna try this tonight buddy
Sent from my X10i using xda premium
Related
Don't boot... I was doing some changes with Generic 2.0.2.A.0.24 firmware [rooted + xrecovery preinstalled], and then... poof!
Now i can't repair with seus update, the phone don't boot!
Do you have any suggestion?
Thank You...
Yeah! The battery!!!!!! I've taking out the battery cable and putting it back in!!!
I can't understand why.... But the phone could not boot, and so i could not do anything.... (seus, or binary flash, adb...)
Thank you for yours ideas!!
dettofatto
I'll post in the working in progress...
have u tried pressing home and back and on/off button together?
or taking out the battery cable and putting it back in?
I bricked mine earlier, just used Binary's flash tool to reflash 2.1
Skeldave said:
I bricked mine earlier, just used Binary's flash tool to reflash 2.1
Click to expand...
Click to collapse
My phone can't boot, and so i can't start adb or similar...
world2010 said:
or taking out the battery cable and putting it back in?
Click to expand...
Click to collapse
Yeah! The battery!!!!!! I've taking out the battery cable and putting it back in!!!
I can't understand why.... But the phone could not boot, and so i could not do anything.... (seus, or binary flash, adb...)
Thank you for yours ideas!!
dettofatto
I'll post in the working in progress...
world2010 said:
have u tried pressing home and back and on/off button together?
Click to expand...
Click to collapse
Yes, but nothing...
Thank you,
dettofatto
tried updating with seus?? and if u didnt succeed use binary flash tool non gui version and download any 2.1 firmware
shivenjuneja said:
tried updating with seus?? and if u didnt succeed use binary flash tool non gui version and download any 2.1 firmware
Click to expand...
Click to collapse
Yeah! The battery!!!!!! I've taking out the battery cable and putting it back in!!!
I can't understand why.... But the phone could not boot, and so i could not do anything.... (seus, or binary flash, adb...)
Thank you for yours ideas!!
dettofatto
I'll post in the working in progress...
dettofatto said:
My phone can't boot, and so i can't start adb or similar...
Click to expand...
Click to collapse
For future reference: You dont need to have your phone "on" to use the flash tool, it just has to be in the update mode. (Hold back button while plugging into the usb). This is for if you ever brick it again
Skeldave said:
For future reference: You dont need to have your phone "on" to use the flash tool, it just has to be in the update mode. (Hold back button while plugging into the usb). This is for if you ever brick it again
Click to expand...
Click to collapse
my phone didn't go in the update mode...
Where is the battery cable?
Sent from my E10i
dettofatto said:
Don't boot... I was doing some changes with Generic 2.0.2.A.0.24 firmware [rooted + xrecovery preinstalled], and then... poof!
Now i can't repair with seus update, the phone don't boot!
Do you have any suggestion?
Thank You...
Yeah! The battery!!!!!! I've taking out the battery cable and putting it back in!!!
I can't understand why.... But the phone could not boot, and so i could not do anything.... (seus, or binary flash, adb...)
Thank you for yours ideas!!
dettofatto
I'll post in the working in progress...
Click to expand...
Click to collapse
sound like you may have cause the hardware some physical damage, i recomend taking it to se so the can have a look see... also have you tried update mode with battry out (as in hold back button, pc cable plugged in and battery out of phone)? also try out another battery..
Karadenizli said:
Where is the battery cable?
Sent from my E10i
Click to expand...
Click to collapse
http://www.ifixit.com/Teardown/Sony-Ericsson-Xperia-X10-Mini-E10i-Teardown/3124/1
Had the same problem
I had the same problem I took phone apart very carefully unplugged the battery cable and left it for +- 10 minutes plugged battery cable back in assembled the phone I used bin4ry console flash tool I just held down only the back button plugged usb cable in flashtool found x10i mini started flash, Don't turn on phone or anything else after re-connecting the battery just the back button and usb, green led should lite up.I don't know if this help's you must have patience after the flash it takes a while leave the phone for +- 5 minutes after flash run adb shell in console if phone seems not to respond try few times once you get shell your phone should be back to normal just be patient it all takes a while.
stuck in boot loop
Gothic-4-Schiffer said:
sound like you may have cause the hardware some physical damage, i recomend taking it to se so the can have a look see... also have you tried update mode with battry out (as in hold back button, pc cable plugged in and battery out of phone)? also try out another battery..
Click to expand...
Click to collapse
Hi,
would it be possible to cause the phone some physical damage while flashing that would've caused the phone to be stuck in the boot loop? because I'm in the asme predicament on my mini pro. thanks
please help me..i'm stuck w/ the white sony ericsson boot logo just after i restored w/ xrecovery..im using a x10 mini pro although i can still access xrecovery..thanks in advance..
take out your sdcard use an external sd card reader and copy a new image like CM6 3.4 on it. now boot into xrecovery.
factory reset
full wipe
clear dalvik cache
install cm6 3.4
reboot
thank you so much slade87..you have saved my fone and my life for w/ your grate help..thank you very much! ^__________^
No prblem i am glad it worked :-D
Sent from my X10minipro using XDA Premium App
i'm stuck w/ the white sony ericsson boot logo just after i try for ugrade to miniCM w/ xrecovery..im using a x10 mini pro although i can't still access xrecovery...
i try for flash.. but still stuck w/ sony ericsson logo.
try for press "menu button and power button it nothing happen...
what can i do for get back my x10 mini pro normal again..
sorry if my english is bad...
ableh.X10black said:
i'm stuck w/ the white sony ericsson boot logo just after i try for ugrade to miniCM w/ xrecovery..im using a x10 mini pro although i can't still access xrecovery...
i try for flash.. but still stuck w/ sony ericsson logo.
try for press "menu button and power button it nothing happen...
what can i do for get back my x10 mini pro normal again..
sorry if my english is bad...
Click to expand...
Click to collapse
Download SE PC companion and install it:
http://www.sonyericsson.com/cws/supp...10?cc=gb&lc=en
Open Sony Ericsson PC Companion when it´s installed:
Choose Support Zone(Start/Begin)->updating the phone software: it will pop up a message phone not found. Search for blue marked: Repair phone. Click on it and follow instructions on how to do.
If you still dont get it, check:
http://www.youtube.com/watch?v=i6CMm...eature=related
Please anyone help me,...
After I flash with customr zip via x recovery my X10 always reboot and cannot enter into menu...
Thank's for any help coz I'm now desperated with this...
mustbiw said:
Please anyone help me,...
After I flash with customr zip via x recovery my X10 always reboot and cannot enter into menu...
Thank's for any help coz I'm now desperated with this...
Click to expand...
Click to collapse
lol...how many threads are you starting for this...
As I said in the dev section thread you started.
Attach your phone to the pc and run SEUS or PC companion and follow the instructions
pc companion cannot detect phone coz x10 canot enter to main menu.. what should I do bro...
mustbiw said:
pc companion cannot detect phone coz x10 canot enter to main menu.. what should I do bro...
Click to expand...
Click to collapse
OK,
Have you got SEUS?
If not google it and download it.
Once you have done that send me a PM
Been through this pickle too, dont worry, go in dev forum search your generic rom, and flashtool and follow the instructions to flash the generic rom, ps, in xrecovery dont forget to make a backup of ur generic rom, saves a lot of time when things like this happen
Sent from my X10i using XDA App
gregbradley said:
OK,
Have you got SEUS?
If not google it and download it.
Once you have done that send me a PM
Click to expand...
Click to collapse
I've got SEUS but stop in the 3rd stage coz it cannot detect my phone since it's always reboot every time...
do you know button key to enter xrecovery? IS it possible to flash from SD card with Xrecovery??
mustbiw said:
I've got SEUS but stop in the 3rd stage coz it cannot detect my phone since it's always reboot every time...
do you know button key to enter xrecovery? IS it possible to flash from SD card with Xrecovery??
Click to expand...
Click to collapse
Do you have recovery installed?
If so, when you see the sony ericsson screen keep hitting the back key (The one on the right on the front)
That will put you into recovery
If not download flashtool from here
and install it on your pc..
attach phone and you will see it connect.
Click root
then ask root permissions
then xrecovery
PS, in SEUS are you holding down the back button...
Turn the phone off (Pull the battery out if you have to and put it back in)
then hold down back button when SEUS says so
mustbiw said:
do you know button key to enter xrecovery? IS it possible to flash from SD card with Xrecovery??
Click to expand...
Click to collapse
The button key is the back button, press it after you boot the phone ay the sony ericsson and yes you can flash custom roms from sd card, just be sure youre on the right baseband, if not flash it with flashtool. Have fun
Sent from my X10i using XDA App
gregbradley said:
Do you have recovery installed?
If so, when you see the sony ericsson screen keep hitting the back key (The one on the right on the front)
That will put you into recovery
If not download flashtool from here
and install it on your pc..
attach phone and you will see it connect.
Click root
then ask root permissions
then xrecovery
PS, in SEUS are you holding down the back button...
Turn the phone off (Pull the battery out if you have to and put it back in)
then hold down back button when SEUS says so
Click to expand...
Click to collapse
Many thank's now I can flash my X10 with froyo_Achotjan v03, but still have a problem with the phone signal, though I have followed all instruction with dev tool...
try to find the app called
dev tools
Goto bad behaviour and them crash system server.
If that does not work make sure you are on the correct baseband.message me if you need more help
mustbiw said:
Many thank's now I can flash my X10 with froyo_Achotjan v03, but still have a problem with the phone signal, though I have followed all instruction with dev tool...
Click to expand...
Click to collapse
Sent from my X10i using XDA App
gregbradley said:
try to find the app called
dev tools
Goto bad behaviour and them crash system server.
If that does not work make sure you are on the correct baseband.message me if you need more help
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I have done that but still I there's no phone signal... and I tray many time to enter xrecovery by pressing power + back button but it never enter the xrecovery..
what shoud I do..
Don't press the power key.
turn the phone on
When you see the sony ericson logo repeatedly press the back key.
If it does not go into recovery you have not installed it on your phone
Sent from my X10i using XDA App
gregbradley said:
Don't press the power key.
turn the phone on
When you see the sony ericson logo repeatedly press the back key.
If it does not go into recovery you have not installed it on your phone
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I have finished successfully using SEUS but it still reboot and never enter main menu, in the past I have installed xrecovery,but is it still there after I installed with SEUS?? what should I do...
If your phone doesnt work after flashing with SEUS then I think your phone is broken.
SEUS a clean install of the latest SE software so it should work.
Did you choose to do an update or a factory reset and update.
Try again in PC Companion and choose factory reset and update.
Go here to download PC Companion
mustbiw said:
I have finished successfully using SEUS but it still reboot and never enter main menu, in the past I have installed xrecovery,but is it still there after I installed with SEUS?? what should I do...
Click to expand...
Click to collapse
gregbradley said:
If your phone doesnt work after flashing with SEUS then I think your phone is broken.
SEUS a clean install of the latest SE software so it should work.
Did you choose to do an update or a factory reset and update.
Try again in PC Companion and choose factory reset and update.
Go here to download PC Companion
Click to expand...
Click to collapse
I do update till complete successfully...
Viola....
Many for thanks all help, I tray to upgrade again using SEUS then after finish I do release the batteray for a minute then I start and everything gone well back to original 2.1...
Thanks everybody....
No problems...dont forget to hit thanks button
mustbiw said:
Viola....
Many for thanks all help, I tray to upgrade again using SEUS then after finish I do release the batteray for a minute then I start and everything gone well back to original 2.1...
Thanks everybody....
Click to expand...
Click to collapse
gregbradley said:
No problems...dont forget to hit thanks button
Click to expand...
Click to collapse
My Last Problem is Phone signal, its always no service though I have use dev tools or factory format with sd card unplugged.... what should I do...
goto settings>about phone and tell me what the phone says for
android version
baseband
kernel version
mod version
i.e the last 4 things on that page
mustbiw said:
My Last Problem is Phone signal, its always no service though I have use dev tools or factory format with sd card unplugged.... what should I do...
Click to expand...
Click to collapse
hello everyone
i srsly need help right now
i was using stock rooted rom 2.3 and i downloaded tripnmiui 2.2 latest version and i flashed it.. .. bt later i realized tht i shldnt hav flashed it through recovery and all..
and then after flashing it i rebooted my phone, after the SE logo it reboots again and again. thn i tried to RESTORE frm recovery bt i dnt knw wht happened that im unable to mount the sd card or even restore from it. i cnt even flash back to stock 2.3 via flashtool.
i dnt knw wt to do. please help ppl.
P.S im a noob
You were trying to use the 2.3 baseband on a non-2.3 rom. That's why it kept rebooting.
To fix it, just keep trying flashtool, PC Companion, or SEUS.
Sent from my X10i using XDA Premium App
Frosty666 said:
You were trying to use the 2.3 baseband on a non-2.3 rom. That's why it kept rebooting.
To fix it, just keep trying flashtool, PC Companion, or SEUS.
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
im unable to Mount the SD card confused:
when i mount from recovery it says :
E: Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(device or resource busy)
Error mounting SDCARD: !
and yes its not even connecting to flash tool.
momerbk said:
and yes its not even connecting to flash tool.
Click to expand...
Click to collapse
Not even in flash mode? (Hold down back button when plugging in the usb)
Sent from my X10i using XDA Premium App
Frosty666 said:
Not even in flash mode? (Hold down back button when plugging in the usb)
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
i know how to connect it my friend. whn i insert usb cable in the phone EVEN if im not holding the back button the led turns green.
other than that, when i connect in flash mode the flash tool doesn't detects the phone though the phone led is green
momerbk said:
i know how to connect it my friend. whn i insert usb cable in the phone EVEN if im not holding the back button the led turns green.
other than that, when i connect in flash mode the flash tool doesn't detects the phone though the phone led is green
Click to expand...
Click to collapse
Install the x10 adb drivers and use flashtool should be good to go
Sent from my X10 using XDA Premium App
Sorry if I sound patronizing or rude or anything, but have you used flashtool before? You open it up, hit flash, choose your firmware, hit ok, when a box comes up about connecting in flash mode, you plug the phone whilst holding the back button. It should start flashing automatically.
With regards to the phone going into flash mode (green led) whenever you plug it in, mine used to do that until I flashed gingerbread on it. Its normal I think, but you should still hit back if you want to get into flash mode.
Sent from my X10i using XDA Premium App
shahkam said:
Install the x10 adb drivers and use flashtool should be good to go
Sent from my X10 using XDA Premium App
Click to expand...
Click to collapse
il try that now and let u know
thanks
Frosty666 said:
Sorry if I sound patronizing or rude or anything, but have you used flashtool before? You open it up, hit flash, choose your firmware, hit ok, when a box comes up about connecting in flash mode, you plug the phone whilst holding the back button. It should start flashing automatically.
With regards to the phone going into flash mode (green led) whenever you plug it in, mine used to do that until I flashed gingerbread on it. Its normal I think, but you should still hit back if you want to get into flash mode.
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
no no not at all my friend. and i did still press the *back* button.
Frosty666 said:
Sorry if I sound patronizing or rude or anything, but have you used flashtool before? You open it up, hit flash, choose your firmware, hit ok, when a box comes up about connecting in flash mode, you plug the phone whilst holding the back button. It should start flashing automatically.
With regards to the phone going into flash mode (green led) whenever you plug it in, mine used to do that until I flashed gingerbread on it. Its normal I think, but you should still hit back if you want to get into flash mode.
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
shahkam said:
Install the x10 adb drivers and use flashtool should be good to go
Sent from my X10 using XDA Premium App
Click to expand...
Click to collapse
okay now i am able to connect in flash mode and its getting detected, i reinstalled the drivers.
not the prob is when i try to flash it with the stock 2.3 rom OR even with baseband .52 i get this :
21/012/2011 06:12:29 - INFO - Preparing files for flashing
21/012/2011 06:12:33 - INFO - Searching Xperia....
21/012/2011 06:12:33 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&1F2FC82A&0&1
21/012/2011 06:12:33 - INFO - Start Flashing
21/012/2011 06:12:46 - INFO -
21/012/2011 06:12:46 - ERROR - Error flashing. Aborted
21/012/2011 06:12:46 - INFO - Now unplug the device and power it on
21/012/2011 06:12:46 - INFO - Then go to application settings
21/012/2011 06:12:46 - INFO - turn on Unknown Sources and Debugging
EDIT
Okay so guys, i finally managed to flash the bb .52 THANKS A LOT love xda and its members *no homo*
Hi mates
My X10 hang on Sony Ericsson logo and not boot into system.
Now i want to flash a kernel or fw with FlashTool but it say turn on debugging mode, but i cant boot into system and turn it on!!!
help me PLEAAAAAAAASE
I'm a noob and this happened to me also,maybe someone is more advanced on this will chime in
..what I did was, bought a service from fast GSM.
Sent from my X10i using xda premium
arash64a said:
Hi mates
My X10 hang on Sony Ericsson logo and not boot into system.
Now i want to flash a kernel or fw with FlashTool but it say turn on debugging mode, but i cant boot into system and turn it on!!!
help me PLEAAAAAAAASE
Click to expand...
Click to collapse
have you xrecovery 0.3? the new one, maybe do a factory reset and wipe all the things and try it again. if that even not work try wipe dalvik cach and fix permissions
my phone dont enter the XRecovery !!!
what can i do ?
no any other way to install new kernel for add Xrecovery with FlashTool ?
My Status:
1.My phone hang on Sony Ericsson logo
2.My phone cant enter in Xrecovery mode.
3.I cant install new kernel with Flashtool bcoz debugging mode is off.
I had the same problem. I made a thread about it and the solution is on the second page. http://forum.xda-developers.com/showthread.php?t=1340161
Basically you got a boot loop and will need to flash a new stock rom and root it again and then put your custom roms if you want.
The solution goes until unlocking a bootloader. If you don't need this, don't do it.
- Captain Scrat
put into flash mode and flash rom with flashtool?
Sent from my SO-01C using xda premium
arash64a said:
my phone dont enter the XRecovery !!!
what can i do ?
no any other way to install new kernel for add Xrecovery with FlashTool ?
My Status:
1.My phone hang on Sony Ericsson logo
2.My phone cant enter in Xrecovery mode.
3.I cant install new kernel with Flashtool bcoz debugging mode is off.
Click to expand...
Click to collapse
Alright, one thing is what you can do is.
use pc companion and going back to the original Android 2.3
and start all over again.
PC companion asks you to drag down USB,how do you do that,if you are stuck in the start up screen?
Sent from my X10i using xda premium
pheel said:
put into flash mode and flash rom with flashtool?
Sent from my SO-01C using xda premium
Click to expand...
Click to collapse
But to flash new rom you have drag down USB,right?
Sent from my X10i using xda premium
z28tovette said:
But to flash new rom you have drag down USB,right?
Sent from my X10i using xda premium
Click to expand...
Click to collapse
No... Just turn off your phone and take out the battery and unplug the USB.
Now hold the back button and put the battery in, it will boot in recovery mode, the green led on the top will light up.
Here you need to plug in the USB quick and flash the stock rom with the flashtool (I suggest having it already selected and the mouse on the button FLASH for quicker use, because the phone does not stay in recovery mode for long, at least mine didnt,)
scrat55 said:
No... Just turn off your phone and take out the battery and unplug the USB.
Now hold the back button and put the battery in, it will boot in recovery mode, the green led on the top will light up.
Here you need to plug in the USB quick and flash the stock rom with the flashtool (I suggest having it already selected and the mouse on the button FLASH for quicker use, because the phone does not stay in recovery mode for long, at least mine didnt,)
Click to expand...
Click to collapse
yes indeed if that dont work try se pc suite.
scrat55 said:
No... Just turn off your phone and take out the battery and unplug the USB.
Now hold the back button and put the battery in, it will boot in recovery mode, the green led on the top will light up.
Here you need to plug in the USB quick and flash the stock rom with the flashtool (I suggest having it already selected and the mouse on the button FLASH for quicker use, because the phone does not stay in recovery mode for long, at least mine didnt,)
Click to expand...
Click to collapse
You are awesome,where were you when this happened to me lol.
Sent from my X10i using xda premium
z28tovette said:
You are awesome,where were you when this happened to me lol.
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Hehe glad to help. I was freaking out when it did happen to me and spent like 1hour doing searches to find how to unloop it. lol
- Captain Scrat
ok today i softbricked my xperia u.
sony ericsson support says it is irreparable, what can i do ?
Flash generic fw using flashtool
If its a soft brick you can flash a stock ftf using flashtool.
Sent from my ST25i using Tapatalk 2
Rapier07 said:
If its a soft brick you can flash a stock ftf using flashtool.
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
i cant get the device to boot into flashmode anymore.
there used to glow a green or blue led light when i connected the device in flash or fastboot mode.
at the current state all i can get is the red led on top to glow if i connect to charger or usb.
im willing to give the device away if someone wants to change for any working sony smartphone..
aanti said:
i cant get the device to boot into flashmode anymore.
there used to glow a green or blue led light when i connected the device in flash or fastboot mode.
at the current state all i can get is the red led on top to glow if i connect to charger or usb.
im willing to give the device away if someone wants to change for any working sony smartphone..
Click to expand...
Click to collapse
Remove the battery. ..wait for about a minute...then reinsert battery and boot into fastboot mode by pressing VOLUME UP key and plug in the usb
Sent from my ST25i using xda premium
Just remove your battery hold down forminute and by pressing
(volume down + plug the usb cable)
U can see green led...and ofcourse flash tool log also said the device connected in flashboot mode...
Now select the firmware.ftf and start flashing.
Restart ur phone done..!
Enjoy.
If you are still problem let me know.
Sent from my ST25i using xda app-developers app
sxpu_nishant said:
Remove the battery. ..wait for about a minute...then reinsert battery and boot into fastboot mode by pressing VOLUME UP key and plug in the usb
Sent from my ST25i using xda premium
Click to expand...
Click to collapse
not working only red led near front camera glows
i cant flash
aanti said:
not working only red led near front camera glows
i cant flash
Click to expand...
Click to collapse
Charge the mother****er up.
Thread moved to Q & A section, kindly post in the relevant section next time.
heeroyun said:
Charge the mother****er up.
Click to expand...
Click to collapse
it IS charged and no green or blue led glowing
bliveinhack said:
Just remove your battery hold down forminute and by pressing
(volume down + plug the usb cable)
U can see green led...and ofcourse flash tool log also said the device connected in flashboot mode...
Now select the firmware.ftf and start flashing.
Restart ur phone done..!
Enjoy.
If you are still problem let me know.
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
I succed, fixed a bricked phone, thank you so much!!!
MF SuperStarr said:
I succed, fixed a bricked phone, thank you so much!!!
Click to expand...
Click to collapse
It's easy to click thanx rather to write...
Sent from my ST25i using xda app-developers app
I bricked my phone
I bricked my xperia U as well... When i tried to power ON, it just vibrates and nothing happens, i dont even get the sony logo. When i get into flash boot mode it gets connected but after 30secs, the phone turns off again. Only fastboot mode stays on. How can i unbrick my phone??? Plz help. I made a mistake by flashing the custom jelly bean rom without flashing the kernel first.
Sent from my ST25i using xda app-developers app[/QUOTE]
adithyasailesh said:
I bricked my xperia U as well... When i tried to power ON, it just vibrates and nothing happens, i dont even get the sony logo. When i get into flash boot mode it gets connected but after 30secs, the phone turns off again. Only fastboot mode stays on. How can i unbrick my phone??? Plz help. I made a mistake by flashing the custom jelly bean rom without flashing the kernel first.
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
[/QUOTE]
Try to remove battery then put it back and flash kernel again
________________________________
Phone : Xperia U
Rom : Stock ICS modded
Kernel : stock
Bootloader : Unlocked ( thank god)
adithyasailesh said:
I bricked my xperia U as well... When i tried to power ON, it just vibrates and nothing happens, i dont even get the sony logo. When i get into flash boot mode it gets connected but after 30secs, the phone turns off again. Only fastboot mode stays on. How can i unbrick my phone??? Plz help. I made a mistake by flashing the custom jelly bean rom without flashing the kernel first.
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
[/QUOTE]
Well no need to panic....
As ur saying ur device connects in fastboot mode just flash the kernel with CWM recovery (r d one u got iwth the zip in JB rom)..
den install JB from the zip (assuming zip present in sdcard)......
it will solve ............
By the way ur bootloader unlocked? or not?
Just fixed it.
Well no need to panic....
As ur saying ur device connects in fastboot mode just flash the kernel with CWM recovery (r d one u got iwth the zip in JB rom)..
den install JB from the zip (assuming zip present in sdcard)......
it will solve ............
By the way ur bootloader unlocked? or not?[/QUOTE]
I have an unlocked bootloader. I tried using fastboot to flash the kernel.elf file in the JB rom zip file but it failed. It said my device had to be rooted and all but my device was already rooted. I used the flashboot fix specified in the thread attached below. It worked and i flashed a stock rom just to be safe and get a working phone.
http://forum.xda-developers.com/showthread.php?t=1849170
Thanks for the help though.
Rapier07 said:
If its a soft brick you can flash a stock ftf using flashtool.
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
I have CWM recovery installed and that it the phone is absolutely blank. No ROM no data nothing its clean slate. i have successfully flashed a kernel via flashtool in fastboot mode. The flash mode doesnt seem to work.
How to proceed further to get my device working.