my gt-s5830 has a problem off switchin on.........
i installed rom manager for de first time ...n i installed clock mod recovery.....
i jus clicked on back up it got switched off n never turned on...so plzzzzz help me out
dineshy said:
my gt-s5830 has a problem off switchin on.........
i installed rom manager for de first time ...n i installed clock mod recovery.....
i jus clicked on back up it got switched off n never turned on...so plzzzzz help me out
Click to expand...
Click to collapse
Another one who didn't read my newbie guide and did not practice caution .
@EmoBoiix3
thanks bro but...can u guide how to resolve my prob now
You need a jig or you have to send it for repair.
I bought my jig on Ebay for £1.49 post free.
It is a USB plug with a 300 mA resistor hot wired across pin 4 and 6 if I remember correctly and it basically resets the phone and kicks it into d/l mode - from there using Odin you can flash a firmware from samfirmware.com . YouTube jigs galaxy ace to see videos on how they work.
Also if you are in warranty - go back to the shop and say you were doing a KIES update and it buggered the phone (this is a known method of bricking a phone due to the ram limitation of KIES) - I did this with carphonewarehouse and it was away for 15 days - hence the reason I bought the jig - 2nd time I inserted the jig 3 seconds later i was flashing the phone.
As to your original brick EmoBoiix3 has already posted an informative warning on the use of ROM Manager - although the new version is suppose to work on the ACE.
Good luck in your endeavours.
thanks to all
Related
First ,I would like to apologise if I'm starting a thread similar with others on this category but I hope for the best to find a different solution in my country.
I'm using a Samsung Galaxy Vibrant got it from a friend who bought it from TMobile . It had 2.1 eclair installed and I changed it with http://forum.xda-developers.com/showthread.php?t=1169800&highlight=Malice using rom manager premium and installed it from my sd card . Everything was ok till the baterry went off and I had to charge it and switch it on .I had an error with a screen full of different points and colors till the Samsung Galaxy S logo appeared on . since that time I couldn't go to recovery,reboot mode anymore .The baterry was draining very fast so stupid rookie me tried to do it again with a 2.2.1 froyo SGH - T959 version . Odin was fine firmware update started but at the end it said failed .I took the usb cable out since nothing was happening for about 10 min and I tried to switch it on but it remained black . I cannot get into download with 3 button combo neither by pulling out the battery and connect the cable . I am not in US right now so I'm trying to find a solution close to my city and I cannot find anybody specialized to fix this kind of problems . I will appreciate your help as good as it gets !
You will need to have the phone's board JTAG repaired with re-written bootloaders. I can do this but I'm in the US. PM me if you run out of local options but be advised that if fallen into the wrong hands, the board can be damaged beyond the point of repair.
hello seniors
i have galaxy s2 with litening rom 6.1 amd kernal speedmod t39. one week ago i install chainfire 3d pro but somehow it didn't work on my s2 so i decide to uninstall it. after uninsalling every thing was fine. but today when i turn off my s2 and restart it. it didn't restart. then i try to go into download mode but nothing even i m not able to enter in recovery mode. i try every thing to come back mu s2 but nothing
i try to pull off battery and reinsert it in to fone then start but fail
i try to pull off battery and then press 1minute power button to complete discharege the current and then press download mode and reinsert the battery but fail
i try to connect the cable and insert the battery but i see only this mssage on my laptop"sec s5pc210 test b/d driver is not installing success fully" and nothing happen with my s2,
so please seniors and developers what should i do to recover my s2 help me
You have no recovery and no download mode correct ???
Charge battery .
Buy USB jig and try that to get download mode .
That fails its a service centre job and be aware that the warranty on the phone has been invalidated so you may be charged for the repair .
jje
now i came to know that my galaxy s2 bootloader is corrupted. thats why i m not able to enter in download mode and recovery mode too. jig is also note working in this condition. so any soloution in this condition seniiors and developers plz?
how can i repair corrupt bootloader?
Service centre if you cannot enter download mode .
jje
today somehow i was able to enter in download mode and after that i sccessfully update my s2 in xxkh3. but after updateing in xxkh3 i think to check it switch off and on and i tried it. again it switch off but never switch on. then i pull off battery and try onather battery but it was again not on.then i put my battery in other s2 and i saw that other s2 was successfully on. after some time my s2 unit was on with my battery but when i switch off and try to start again fail. after half hour i came to my home and try to connect my s2 in computer then i see the battery charging progress bar. thus i again press start button and voila it start. but now i m afraid to switch off my s2 becouse if it counld not be start then wat will i do. this is full updated situation with me. plz help.
bruceleedragon1 said:
today somehow i was able to enter in download mode and after that i sccessfully update my s2 in xxkh3. but after updateing in xxkh3 i think to check it switch off and on and i tried it. again it switch off but never switch on. then i pull off battery and try onather battery but it was again not on.then i put my battery in other s2 and i saw that other s2 was successfully on. after some time my s2 unit was on with my battery but when i switch off and try to start again fail. after half hour i came to my home and try to connect my s2 in computer then i see the battery charging progress bar. thus i again press start button and voila it start. but now i m afraid to switch off my s2 becouse if it counld not be start then wat will i do. this is full updated situation with me. plz help.
Click to expand...
Click to collapse
id honestly take it to a service center friend...best thing to do really..sorry
some people say to me it is happening due to humidity or liquid. when i pull off my battery and rensert it into phone i observe that heat rises near camera without switch on why i dont know. anyone have idea about that.my s2 some time start but when i switch off it again refuse to start why plz help me
bruceleedragon1 said:
some people say to me it is happening due to humidity or liquid. when i pull off my battery and rensert it into phone i observe that heat rises near camera without switch on why i dont know. anyone have idea about that.my s2 some time start but when i switch off it again refuse to
Click to expand...
Click to collapse
start why plz help me
Open a map and find service centre .
Or post me your SGS2 with 500 dollar to fix .
jje
hello jje i m from india not from ur country.so how can i send u my sgs2. i have no idea about you. what is the gurantee from you that after posting my sgs2 to u with 500 dollars it would be return back to me. so plz if u could do help with this forum do it otherwise ok, plz dont mind about my words.
From what I understand if in fact your bootloader is corrupt there is a JTAG method for recovery but requires opening the handset itself. Same thing happend to me and im having to get it send in. There are a few places that do it for cheap in the states.
neon_skunk said:
From what I understand if in fact your bootloader is corrupt there is a JTAG method for recovery but requires opening the handset itself. Same thing happend to me and im having to get it send in. There are a few places that do it for cheap in the states.
Click to expand...
Click to collapse
Regarding this method of JTAG, here is a list of dealers that do repair phones via JTAG:
Samsung Boot / Jtag / UnBrick / Dead Phone / Software Repair Dealers
bruceleedragon1 said:
hello jje i m from india not from ur country.so how can i send u my sgs2. i have no idea about you. what is the gurantee from you that after posting my sgs2 to u with 500 dollars it would be return back to me. so plz if u could do help with this forum do it otherwise ok, plz dont mind about my words.
Click to expand...
Click to collapse
Hey hi i am also having the same problem as mentioned by you...pls guide me if u have restored your mobile to running state..
i have a problem with my galaxy s2 exactly like this: got a wierd problem. My galaxy S2 refuses to shut down.
When I shut the phone down without a USB cable connected then the phone turns black and the 'menu and 'return' button lights up then the phone vibrates. at this stage before the buttons turns black and the phone was totally shut down. now instead the buttons are still lit after the vibration and then the phone starts up again.
With a USB plugged in after the vibration when shutting down I get to the screen where the battery indicating charging is shown, but as soon i remove the USB cable the phone starts.
The power button is not stuck.
It's not rooted: cleared the cache in 3e recovery. No change.
I fully charged my battery. No change
I drained my battery to 0%. No change
I tried another battery. No change.
Well i thing i should Re-flash a Bootloder or install another one, is there any idea how to do that throw ODIN1.85 Please please please help me im just
First step back up data factory reset phone .
Do not start messing with bootloaders flash a full stock firmware if you have to .
jje
Bootloader via Odin available in intratechs thread. In post where ki3 is. Maybe 3rd post???
http://forum.xda-developers.com/showthread.php?t=1075278
Sent from my GT-I9100 using XDA App
WELL....
Can you people be more clearly on Ur Tips Please, Do i have to Update Bootloader or Bootloader will Automatically update after i flash a Full firmware via Odin or during update a frimware do i need to click a tick there writting "UPDATE BOOTLOADER" or not or let me know any Solution pleaseeeeeeeeeee . English is my 3rd Langue so Please try to explane with a Simply English Brothers and sister. I feel sucks No one can fix my Problem here in Kosovo.
If you are going to flash New firmware via Odin from intratech you will automatically get the right (older) bootloader that lets you clear the flash counter with the jig.
If you have already flashed KI3 or KI8 from somewhere else chances are you will have the new bootloader flashed on your phone.
If that is the case intratech has the older bootloader that you can download and flash via Odin without having to flash the full firmware again.
Read the 1st few posts in his thread carefully for the exact steps to follow.
Good luck.
Sent from my GT-I9100 using XDA App
@ aceofclubs and Others
Well i try Many of Roms to flash i try with older and newer Problem still there, i think i need to Change a Usb Port (Electronic Usb maybe i demage with a bad Charger or Who know). Is there any Idea where i can Buy&Purchase Galaxy s2 Electronic Parts
I has this same problem after flashing ki4. Would not shut off. Kept booting up every time I tried to switch off. After a bit of searching I found a fix got my phone. Just remove the battery for 30 seconds. Reinstall and try again. Might not work for you but won't cost anything to try.
Edit
Just read. You already tried another battery do this won't help you. Sorry.
Sent from my GT-I9100 using Tapatalk
YEAHH
dear Friend thanks for trying to help me, but i can not find a human being that can tell me how exactly to fix my problem i have this problem 1 month, for me it will be enough to know if is a Software or hardware problem. Problem is here in Kosovo we dont have a Samsung Store that can fix, only a solution is to send in Germany(1.441 Km ) , it will coast to me just a new Galaxy s2... i have exacly this problem like this guy in youtube here is a link : http://www.youtube.com/watch?v=eBB_3qtgj68
or check this thread: http://forum.xda-developers.com/showthread.php?t=1237228
Ok so my problem is that i eooted my wife galaxy ice without any problem, i downloaded rom manager and download nice custom rom, so at this time i lieft phone at home and go to work. At this time i didnt know that rom manager is not suporting ace device. MY WIFE KNOW a bit about rooting because she saw me rooting all of my androud device,so while a went to work she want to suprise me and she want to instal custom rom on her own so she went to rom manager and when rom manager ask her to confirm device name ahe couldnt find ace on the list, so for some stupid reazon she choose huwei phone and she flashed cwm. After that she go to instal rom from sd and she choose cynanogen ics rom,phone go to reboot but it never turn on again, i try go to download mode but it wont go to it, i remooved battery press three magic buttons and at the same time inserting battery qbut noting pc is not recognizing device. The only way for pc to recognize my phone is when i press volume up+home+power(like recovery mode) when i do this my pc is recognizing my wife ace and odin can see it also,but when i try to flash stock rom odin stock on "setupconnection" i closed all kies backgrounds but still same. I also try jig to boot in to download mode but it wont work.
Sent from my GT-N7000 using xda premium
Sent from my GT-N7000 using xda premium
Try if you can go to download mode again or recovery mode..
if not..
simply give it to the service center and tell them it simply stopped working when i woke up one fine morning...
most of the time bricking with rom manager is unrecoverable by users, only service center can repair it. i think i saw a guy claimed he recovered his bricked-by-rom-manager ace in a thread before but couldn't remember which thread it is.
try to search for the thread.
an0nym0us_ said:
most of the time bricking with rom manager is unrecoverable by users, only service center can repair it. i think i saw a guy claimed he recovered his bricked-by-rom-manager ace in a thread before but couldn't remember which thread it is.
try to search for the thread.
Click to expand...
Click to collapse
I think the service center is the only option left...
btw..your thank counter is at 666...feeling devilish much?
Probably have to change the whole motherboard, it's probably better to get a new phone at this stage. Another way (don't get your hopes up) is to use JTAG, that will probably work but if you dont know anyone with the equipment the pricing will actually be more expensive than the Ace itself.
Additionally, it would be wiser to state your actual problem on the thread title.
szymi22 said:
Ok so my problem is that i eooted my wife galaxy ice without any problem, i downloaded rom manager and download nice custom rom, so at this time i lieft phone at home and go to work. At this time i didnt know that rom manager is not suporting ace device. MY WIFE KNOW a bit about rooting because she saw me rooting all of my androud device,so while a went to work she want to suprise me and she want to instal custom rom on her own so she went to rom manager and when rom manager ask her to confirm device name ahe couldnt find ace on the list, so for some stupid reazon she choose huwei phone and she flashed cwm. After that she go to instal rom from sd and she choose cynanogen ics rom,phone go to reboot but it never turn on again, i try go to download mode but it wont go to it, i remooved battery press three magic buttons and at the same time inserting battery qbut noting pc is not recognizing device. The only way for pc to recognize my phone is when i press volume up+home+power(like recovery mode) when i do this my pc is recognizing my wife ace and odin can see it also,but when i try to flash stock rom odin stock on "setupconnection" i closed all kies backgrounds but still same. I also try jig to boot in to download mode but it wont work.
Sent from my GT-N7000 using xda premium
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
i bricked my phone while going from 2.3.4 to 2.3.5
If your phone doesn’t boot into download mode and you have a black screen after flashing heres how you unbrick it, it worked for me .
Step 1 – Prepare odin with the firmware u want to flash (in my case was gingerbread 2.3.3) and get it ready to go;
Step 2 – Remove battery and connect your galaxy ace to the computer;
Step 3 – Hold Volume down + Power + Home button at the same time;
Step 4 – Insert the battery and wait a bit;
Step 5 – At this point Odin should have detected your SG Ace ( Yellow rectangle should appear);
Step 6 – Click Start button in Odin and wait about 5 min.
step 7- if force close issue come-- boot into recovery mode by pressing middle button+power and then releasing power button (keeping middle button still pressed) wipe data wipe cache ..
reboot
If all goes well it should come back to life.
at last service centre is the only choice.. tell them u installed antivirus from market one night and other day u find it un-bootable
King ACE said:
btw..your thank counter is at 666...feeling devilish much?
Click to expand...
Click to collapse
not anymore :/
Aj.GaLaxY aCE said:
at last service centre is the only choice.. tell them u installed antivirus from market one night and other day u find it un-bootable
Click to expand...
Click to collapse
Lol wat, i never heard of that one before. The most common one (which actually worked for my friend) is about updating using KIES, my friend got a new phone without any trouble at all.
QNBT said:
Lol wat, i never heard of that one before. The most common one (which actually worked for my friend) is about updating using KIES, my friend got a new phone without any trouble at all.
Click to expand...
Click to collapse
choice depends on you.... its that are u a good actor and can u convince
If I'm not wrong you can bring it back using a jtag box, 25 pounds could get yourself that.
But just repair it it's easier.
I think You go to service center tell them that your phone got switched off when You were talking on the phone and then it never started again and always act like Noobs in front of them.....
I hope you have warranty for your ace
Sent from my GT-S5830 using Tapatalk 2
I got the solution : For bricked ice........ Take an
Icepick.... .. Sorry, but this pass was too good....
I have come across such a situation and successfully have brought back my ace to life. (Disclaimer: I am not saying these are the steps to recover any bricked device, but this is a method i followed once when i bricked my device by following a wrong flashing method)
Just remove the battery and try to switch on normally without pressing any combination. It would not do anything but would drain remains completely.
Then do not put the battery back for a while (in my case i kept it for 5 mins)
Then again follow the same procedure without battery, just press the power button for 10 secs without pressing any other keys and see what happens. It should remain blank.
After that, try to connect the USB cable and then press power + v down + center key and see if it goes to download mode. If not, then put in the battery without removing the cable, then see if it automatically switches on to emergency recovery mode (It should).
Next when u see the emergency recovery screen, now try going to download mode by using the combination (power + vdown + center)
Please let me know if this works. ( I hope this should work)
service center
buy "USB Jig" so the phone will start in download mode and you can easily flash it with odin.
http://www.ebay.com/sch/i.html?_trksid=p5197.m570.l1313&_nkw=usb+jig&_sacat=0
Here's the solution:
Step 1: Buy a baseball bat
Step 2: Get home
Step 3: Beat up yo wench with the bat and scream "You dumb *****! Make me a sandwich".
Sent from my GT-S5830 using Tapatalk 2
I've done same what your wife do before.. so i tried every thing but still cant unbrick..
Just send to servis centre if you still have warranty..
I tell them i was on fb but it( ace) goes off..
If u doesnt have warranty anymore just go to phone shop tell them to change your ace board..
Just click thanks if i help u..
I just want to help.. :banghead:
Sent from my GT-S5830 using xda premium
Hi I'm new to this forum so I'm sorry if this is the wrong place for this question but I didnt see a better one.
So.I got my SGS2 two weeks ago on Thursday (used,no warranty) and I was very happy with it ... only the fact that it seemed to be an issue ob Android 4.1.2 to drain the S2's battery like hell...so .. I flashed some custom roms (still based on JB) but nothing really happend...so I tried to flash back to 4.0.4 (which I have done before to update to stock JB again) and it got stuck on the repartition ..
Oh my ... I noticed something while writing.I flashed those files:
"[CSC] I9100XWLP7_I9100XXLPS_I9100XENLP3_HOME"
"[PDA] I9100XWLP7_I9100XXLPS_I9100XENLP3_HOME"
"[PHONE] I9100XWLP7_I9100XXLPS_I9100XENLP3_HOME"
So .. I was JUST looking for the PIT file I flashed .. and .. looking on my desktop I noticed that theres an "s1_odin_20100512"...but when I flashed it before I used "u1_02_20110310_emmc_EXT4" which was in the package with the CSC,PDA and PHONE files above.So MAYBE I accidently used the S1 PIT file for flashing and that couldve been the reason why it got stuck.
However..it got stuck on the repartition so I took out the battery and wanted to restart the phone...and yeah .. didnt work.nothing works anymore .. no download mode, no boot, no recovery (no boot) .. BUT when I plug it to the USB cable it gets warm near the camera lens.So ive done some research and some spoke about a USB jig that might help.Ive ordered it but it still didnt arrive so Im stil waiting for it but im still trying to find a solution ... I got to this page [URL="http://forum.xda-developers.com/showthread.php?t=1756242[/URL] and it says in the first post:
"Symptoms of 4.0.4 HARDBRICK :
-Phone dead
-No power up
-No boot
-No download mode (odin mode)
-No charging (usb/ac)
-Not detectable by pc / jtag
-Usb jig & jtag useless
-With battery(charged) inserted, phone(off) gets hot near the camera lens
-JUST A PIECE OF PLASTIC !!!!
-You feel really stupid about trying all this new stuff"
Theres no software on the phone at the moment as I made a factory reset and all this typical pre-flashing preparation but all those symptoms are correct .. So .. what could I do now?Is it hardbricked?Or is there anything I can do since I maybe flashed the S1 PIT ... ?! its the first time something went wrong while flashing and I think I cant afford another phone so fast as Im only 15 years old...so .. I hope someone can help me...
xEnigma said:
Hi I'm new to this forum so I'm sorry if this is the wrong place for this question but I didnt see a better one.
So.I got my SGS2 two weeks ago on Thursday (used,no warranty) and I was very happy with it ... only the fact that it seemed to be an issue ob Android 4.1.2 to drain the S2's battery like hell...so .. I flashed some custom roms (still based on JB) but nothing really happend...so I tried to flash back to 4.0.4 (which I have done before to update to stock JB again) and it got stuck on the repartition ..
Oh my ... I noticed something while writing.I flashed those files:
"[CSC] I9100XWLP7_I9100XXLPS_I9100XENLP3_HOME"
"[PDA] I9100XWLP7_I9100XXLPS_I9100XENLP3_HOME"
"[PHONE] I9100XWLP7_I9100XXLPS_I9100XENLP3_HOME"
So .. I was JUST looking for the PIT file I flashed .. and .. looking on my desktop I noticed that theres an "s1_odin_20100512"...but when I flashed it before I used "u1_02_20110310_emmc_EXT4" which was in the package with the CSC,PDA and PHONE files above.So MAYBE I accidently used the S1 PIT file for flashing and that couldve been the reason why it got stuck.
However..it got stuck on the repartition so I took out the battery and wanted to restart the phone...and yeah .. didnt work.nothing works anymore .. no download mode, no boot, no recovery (no boot) .. BUT when I plug it to the USB cable it gets warm near the camera lens.So ive done some research and some spoke about a USB jig that might help.Ive ordered it but it still didnt arrive so Im stil waiting for it but im still trying to find a solution ... I got to this page [URL="http://forum.xda-developers.com/showthread.php?t=1756242[/URL] and it says in the first post:
"Symptoms of 4.0.4 HARDBRICK :
-Phone dead
-No power up
-No boot
-No download mode (odin mode)
-No charging (usb/ac)
-Not detectable by pc / jtag
-Usb jig & jtag useless
-With battery(charged) inserted, phone(off) gets hot near the camera lens
-JUST A PIECE OF PLASTIC !!!!
-You feel really stupid about trying all this new stuff"
Theres no software on the phone at the moment as I made a factory reset and all this typical pre-flashing preparation but all those symptoms are correct .. So .. what could I do now?Is it hardbricked?Or is there anything I can do since I maybe flashed the S1 PIT ... ?! its the first time something went wrong while flashing and I think I cant afford another phone so fast as Im only 15 years old...so .. I hope someone can help me...
Click to expand...
Click to collapse
Try once the 'UsbJig' u ordered arrives, if the phone doesn't respond to it then IMO a 'Jtag' or a Motherboard replacement is the option left
never use a 'Pit' file unless and until ur shure of what ur doing
Sun90 said:
Try once the 'UsbJig' u ordered arrives, if the phone doesn't respond to it then IMO a 'Jtag' or a Motherboard replacement is the option left
never use a 'Pit' file unless and until ur shure of what ur doing
Click to expand...
Click to collapse
Yeah .. will do and post the result here then.
Tbh, I dont know why I had the s1 pit file at all ..
xEnigma said:
Hi I'm new to this forum so I'm sorry if this is the wrong place for this question but I didnt see a better one.
So.I got my SGS2 two weeks ago on Thursday (used,no warranty) and I was very happy with it ... only the fact that it seemed to be an issue ob Android 4.1.2 to drain the S2's battery like hell...so .. I flashed some custom roms (still based on JB) but nothing really happend...so I tried to flash back to 4.0.4 (which I have done before to update to stock JB again) and it got stuck on the repartition ..
Oh my ... I noticed something while writing.I flashed those files:
"[CSC] I9100XWLP7_I9100XXLPS_I9100XENLP3_HOME"
"[PDA] I9100XWLP7_I9100XXLPS_I9100XENLP3_HOME"
"[PHONE] I9100XWLP7_I9100XXLPS_I9100XENLP3_HOME"
So .. I was JUST looking for the PIT file I flashed .. and .. looking on my desktop I noticed that theres an "s1_odin_20100512"...but when I flashed it before I used "u1_02_20110310_emmc_EXT4" which was in the package with the CSC,PDA and PHONE files above.So MAYBE I accidently used the S1 PIT file for flashing and that couldve been the reason why it got stuck.
However..it got stuck on the repartition so I took out the battery and wanted to restart the phone...and yeah .. didnt work.nothing works anymore .. no download mode, no boot, no recovery (no boot) .. BUT when I plug it to the USB cable it gets warm near the camera lens.So ive done some research and some spoke about a USB jig that might help.Ive ordered it but it still didnt arrive so Im stil waiting for it but im still trying to find a solution ... I got to this page [URL="http://forum.xda-developers.com/showthread.php?t=1756242[/URL] and it says in the first post:
"Symptoms of 4.0.4 HARDBRICK :
-Phone dead
-No power up
-No boot
-No download mode (odin mode)
-No charging (usb/ac)
-Not detectable by pc / jtag
-Usb jig & jtag useless
-With battery(charged) inserted, phone(off) gets hot near the camera lens
-JUST A PIECE OF PLASTIC !!!!
-You feel really stupid about trying all this new stuff"
Theres no software on the phone at the moment as I made a factory reset and all this typical pre-flashing preparation but all those symptoms are correct .. So .. what could I do now?Is it hardbricked?Or is there anything I can do since I maybe flashed the S1 PIT ... ?! its the first time something went wrong while flashing and I think I cant afford another phone so fast as Im only 15 years old...so .. I hope someone can help me...
Click to expand...
Click to collapse
Alright,got the JIG now (seller sent 3)....it nothing works.No download mode,nothing..kinda upsetting and frustrating
xEnigma said:
Alright,got the JIG now (seller sent 3)....it nothing works.No download mode,nothing..kinda upsetting and frustrating
Click to expand...
Click to collapse
Sh1t happens. Its a lesson to read and learn properley before messing with your device.
TheATHEiST said:
Sh1t happens. Its a lesson to read and learn properley before messing with your device.
Click to expand...
Click to collapse
As I said,its the first time ever that something went wrong for me while flashing...however.going to do a JTAG soon..thanks
No.....Don't jtag....the way things stand....you still have warranty.....if you use jtag, Samsung WILL notice and will claim 'unauthorised rework' which will be used to deny warranty repair......
I assume that recovery and download modes are not available? and that you get no indication on the screen when you plug your charger in?
That being the case, not even Samsung can revive it, so there will be no evidence that the phone has been modified.
Take it to Samsung and 'play dumb'
Tell them you connected it to Kies and tried to update....the phone switched off then wouldn't switch on again.......
DON'T mention XDA
DON'T mention BRICK
DON'T mention .PIT
DON'T mention ODIN
DON'T mention CUSTOM ROM
DO blame KIES and UPDATE
ONLY if all that fails, should you consider jtag.......
Edit....forget all that.....just re read your OP and seen you stated you don't have warranty......though depending on where you live, Samsung sometimes offers a two year warranty.......
Sent from my GT-I9100 using xda app-developers app