Related
Hey all. I just got a new G Tablet and am trying to install CM7 I was following the instructions to the letter from (Since I an't post links, just google this) Cyanogenmod G Tablet Wiki Full
I got through the 'Installing ClockworkMod Recovery' part and everything appeared to finish successfully.
After rebooting the device, I tried to boot into Recovery to install CM7 and the device just freezes on the ViewSonic splash screen. The screen says 'Recovery key detected Booting recovery kernel image', but it just sits there.
I am able to boot the device into the stock OS, but I can no longer get into recovery.
What can I do?
Tap UI Version: 1,2-4349
Kernel Version: 2,6,32,9-00001-g0e0c333-dirty
Build number: FRF91
Thank you in advanced for your help. Please let me know if there is any other information you need about my device.
Andrew
The key to your post is
Tap UI Version: 1,2-4349
Click to expand...
Click to collapse
You're on the 1.2 bootloader, and CWM .8 will not work on it. There is a versio nthat WILL work, but I, unfortunately don't know the exact link to provide for you. I'll attempt to look it up and get back to you, though.
basically, your G-Tablet, was at some point, updated with the most recent OTA update provided by viewsonic. The update was pulled 24 hours after it was released. You're not lost with 1.2...you have many options. You can either stay on 1.2 and flash any of the many 1.2 roms...some are listed in the development section, others can be found on "another" forum.
If you need CM7, then I suggest that you follow the "foolproof flash to stock 4349" thread, (http://forum.xda-developers.com/showthread.php?t=1039000) but STOP once you've successfully flashed STOCK 3588.
3588 is on the 1.1 bootloader required for CM7.
EDIT:
I also find it interesting, it appears that pershoot's kernel has been installed already? Was this a brand new out of the box G-Tablet, or a used one? I am actually hoping that it's used. If it's NEW, then VS needs to explain how it came with a redacted update AND a custom kernel...
THANK ROEBEET FOR THIS:
Since I can't link to another forum, I decided to copy and paste. If people are going ot come ot XDA with issues involving the now taboo 1.2 bootloader, then they'll need to admit that the only way to help them is to link to a forum that everyone is migrating to.
Download
clockworkmod v3.0.2.8 (1.2 branch / NIA rev5) Link: http://www.mediafire...2flqn8b10ebcq44
md5sum: ac4d728d74a6b608cce588d2649e79f3
(updated on 5/15/2011)
clockworkmod v3.0.2.8 (1.2 branch rev2) Link: http://www.mediafire...x61q8jlu2dx8i9u
md5sum: 48c0c40175ab38cebc1199f9d3be8a7d
(updated on 5/05/2011)
THIS REV2 VERSION HAS BEEN TESTED MORE, but nandroid restores are not working properly. Rev5 corrects that, but I need more testers to confirm stability, please!
Many thanks to bekit and rothnic, for their work with clockworkmod!! Their documentation is what assisted me to get this functioning.
NOTE ON CWM: Do not use the Android GUI tool to wipe user data, or else cwm will get stuck in a reboot loop! If this occurs, there are two ways to fix this:
1- ADB required
In clockworkmod, go to mounts and storage and mount /system. Then, run this on your local PC:
adb shell
cd /system/bin
./fixrecovery.sh
Then reboot. What should occur is that standard recovery should pop up and complete the data wipe. On the next reboot, you should be able to get back into the GUI.
2- nvflash required
Using the 4349 nvflash image, run this:
nvflash --bl bootloader.bin --download 9 part9.img
Then reboot. What should occur is that standard recovery should pop up and complete the data wipe. On the next reboot, you should be able to get back into the GUI.
Click to expand...
Click to collapse
TJEvans (is it ok if I call you TJ for short?) thank you very much for your help, I appreciate it very much. I'm sorry if confuse some terms here as I try to address your posts inline below, but I would definitely still consider myself a novice at this process of installing custom roms.
TJEvans said:
EDIT:
I also find it interesting, it appears that pershoot's kernel has been installed already? Was this a brand new out of the box G-Tablet, or a used one? I am actually hoping that it's used. If it's NEW, then VS needs to explain how it came with a redacted update AND a custom kernel...
Click to expand...
Click to collapse
This is a brand new G Tablet. I litteraly got in the mail today from Tiger Direct. I'm wondering if the Clockworkmod I tried to install is responsible for the custom kernel.
TJEvans said:
If you need CM7, then I suggest that you follow the "foolproof flash to stock 4349" thread, (http://forum.xda-developers.com/showthread.php?t=1039000) but STOP once you've successfully flashed STOCK 3588.
3588 is on the 1.1 bootloader required for CM7.
Click to expand...
Click to collapse
I don't necessarly need CM7, but that is what I have on my Nook Color, and I really like it.
The main question I have is that right now, I cannot get into clockwork or stock Recovery at all. I do have adb working, so I would think my next steps will require me to use adb.
At the moment since I can't get to recovery I seem to be stuck. Is there a process somewhere I can get recovery working again using adb?
OK...let's try something. It looks like you may actually be in stock recovery, but there's nothing for it to recover.
do you know of a way to get a file and a folder onto your internal SD?
if so, let's edit the instructions to be able to flash to 3588 stock...
What you need:
1. A stock 3588 image renamed to 'update.zip' (http://tapntap.http.internapcdn.net/...-3588-user.zip)
2. A folder called recovery with a file in it called COMMAND inside it with the following line of text:
Code:
--update_package=SDCARD:/update.zip
Click to expand...
Click to collapse
if yo ucan get those on the SD, then when you reboot, the stock recovery will run and install stock 3588 1.1 based rom and recovery, then you can install your CWM .8.
I have never used NVFlash or ADB, or APX...I have no experience with them. I'm just here helping people that have compatibility issues between 1.1 and 1.2 bootloaders.
After all, the key to fixing problems, is to first find out what the problem is...
I wish I could help more, but I've seen more and more people softbrick their g-tabs by using NVFlash than anything else. I'm not ready to go messing around with my own root files, yet.
If you can get that file, and that folder onto your SD, then stock recovery will automatically recognize it and run it...
I may have just really screwed things up. I ran 'adb reboot recovery' and I gets to the Splash screen with 'Booting recovery kernel image' and gets stuck. Now, I can't get into the device at all.
Also, none of the links in your posts seem to work for me.
try them from the original post, then:
http://forum.xda-developers.com/show....php?t=1039000
sorry, like I said, I'm not a techy...just a guy that doesn't like to see people suffer...
TJEvans said:
THANK ROEBEET FOR THIS:
Since I can't link to another forum, I decided to copy and paste. If people are going ot come ot XDA with issues involving the now taboo 1.2 bootloader, then they'll need to admit that the only way to help them is to link to a forum that everyone is migrating to.
Click to expand...
Click to collapse
It's far from being taboo since it's the honeycomb bootloader... their recovery was blue for a reason...
maybe they pulled those OTA update because they had not licensed honeycomb anyhow, 1.2 is perfectly good to install as long as you use a 1.2 compatible kernel you can even use non 1.2 rom!
Ok, I was able to get the device working again using NVFlash. (http forum,xda-developers,com/showthread,php?t=861950 replace commas with periods).
Now, I have the following:
Tap UI:1,1-3588
Kernel is still: 2,6,32,9-00001-g0e0c333-dirty
I don't know anything about this kernel, or how I got it, other than maybe it came with my first errant clockwork install.
Can you give me some pointers on how I should proceed? (I would still like to get to CM7 at some point, but I don't know if I should get a different kernel or go back to the stock kernel as well)
GREAT NEWS....glad you god it running so far.
OK, that may be the stock kernel...the numbers looked familiar to me, and I've never seen the stock kernel on that report...so, I may be mistaken.
in any case, you are now back on stock 3588 1.1 bootloader...
Now, you should be able to install the CWM .8 that you tried before, and flash CM7 from there...basically, follow the guide you followed before. but this time, it should work fine, since you are on the right bootloader.
Just remember, research ANY new roms you want to try to make sure what bootloader they are on.
to P00r:
as long as you use a 1.2 compatible kernel you can even use non 1.2 rom!
Click to expand...
Click to collapse
see, I didn't even know that...
The thing I'm seeing, is that Clemysn posted the BOS infromation here, and tried to emphasize that it's a 1.2 Rom...The 1.1 rom's though, do not indicate that they are 1.1 Roms. when 1.1 was all that existed, it made no difference, but now that there is another option, they should at least make sure to add "PLEASE BE SURE YOU ARE USING A 1.1 BASED BOOTLOADER BEFORE FLASHING THIS ROM!!!"
As you can see from Imarikinrat's post, he bought a supposedly factory G-Tablet with 4349 prepackaged on it...now, granted, you and I both know that it's more than likely a refurbished one, as I can't see Viewsonic intentionally releasing product with a bootloader and firmware that was pulled from their updater...
in any case. Roebeet kinda predicted that this would happen a bit. Since most moderators on XDA downplayed the impact of 1.2, it's gone fairly ignored. Think about Imaricanrat's post for a second. Had he not posted his system information there is no way that we would have known that it was a bootloader conflict. It would have been assumed that he was on 1.1 bootlaoder with a "brand new" g-tablet (seriously, man, I'd check that thing with a magnifying glass to make sure that there are no scratches or anything that would indicate that it was anythign other than BRAND NEW)
anyway...had he not posted that he was on 1.2, then who knows what advice he would have been given.
Well, now I'm back to my original problem. I cannot get into Recovery. When I start holding Power and Vol+, I see 'Recovery key detected Booting recovery kernel image' it then goes to the 'gtablet' splash screen then quickly into a screen with a box with an arrow and a progress bar (the progress bar has the candy cane animation and nothing happens for all of 3 seconds) then the device reboots.
I have tried putting the recovery folder and update.zip in the internal memory, and on an sd card to no avail. Any other suggestions?
that most certainly sounds like stock recovery to me...
I'm at a loss...it worked fine for me when I flashed to 4349 from stock 3588...just ran and installed, then I ended up on 4349 stock...
you're following the CM7 install guide? Or are you trying to install CWM at this point? I never installed CWM myself, as mine came with it on it.
I'm trying to install clockworkmod so that I can install CM7. Is that the right way to do it? I know there was a stock recovery gui that I cannot get into now.
as long as the recovery folder is on the SDcard, it will automatically attempt to run it...
picture it this way...remember back in the day of windows 3.1 In some cases, if you inserted a floppy disk with a boot file on it, it would check there first, then boot from internal memory...
So, the recovery folder is telling it to run the file in it, which unpacks and installs the update.zip.
once again, though, I never installed CWM myself, but from what you're saying, it should be working.
what happens if you remove the folder and file (after running it), and attempt to go into recovery again?
When I remove the file, folder, and SD card and try to get into recovery, I see 'Recovery key detected Booting recovery kernel image' it then goes to the 'gtablet' splash screen then quickly into a screen with a box with an arrow and a progress bar (the progress bar has the candy cane animation and nothing happens for all of 3 seconds) then the device reboots.
hmm...the box with the arrow and progress bar indicates that it's trying ot run something from recovery...weird..
ANYONE ELSE???
I'm not experienced enough to help...anyone else know enough about flashing CWM from stock, or flashing CM7, that can help out, please chime in.
thanks.
and sorry Imarican...I tried, but once again, no techie here.
No worries man, thanks for your help. Have a good night.
Update: Ok, I think somehow this whole process messed up the 'Recovery Partition' on my G Tablet for whatever reason. When I performed the NVFlash back to stock, it managed to 'fix' the majority of the device, allowing me to boot normally into Tap UI:1,1-3588. However that flash did not fix my Recovery Partition.
With all of that in mind, I found instructions on XDA to install 'clockworkmod via nvflash' (Since I still cannot post links, just google that and it should be the first link, also it's XDA thread 1058649).
After following those steps, I am now able to boot into Recovery which is now Clockwork Mod Recovery, and hopefully *crosses fingers* be able to flash CM7.
Given that I will probably never go back to stock anything on this device, does anyone know where I can download the 'Stock Recovery' for the G Tablet?
so is the point of this article Tiger direct sell used products as new?
so is the point of this article Tiger direct sell used products as new?
Click to expand...
Click to collapse
unconfirmed...what we know is that he had 1.2 4349 out of the box, stock firmware. There are a few possibilities. This could be a Tiger Direct return that was repackaged and sold as new. It could also be a direct from VS return that was repackaged as new, OR, VS actually sent a stock of G-Tablets to Tiger Direct that were packaged with the 4349 firmware on it.
Either way, people need to be careful when flashing roms and such. XDA has not, so far, made it clear which roms, kernels, and CWM versions are good on which bootloader. Some have been asking that devs start exiting posts to indicate which bootloader is needed for each mod, to attempt to avoid confusion.
We must also realize that new G-Tablets are being bought every day, and not every owner is knowledgable of the issues of the recent past, with VS, NVidea, 1.1, 1.2, etc. Most people probably, reasonably, assume that they can open it, root it, and start flashing whatever they want, not even aware that there is a difference.
Ok, I've already searched the forums, both in the Evo3D section and outside, I've also have within the last week tried many different sense roms, all of which had the exact same problem: my camera does NOT work.
The closest thing to working was mike1986's Android Revolution HD (so far). The camera app boots into the window that ask to choose between Done or run the Demo Video. The Demo Video sends ye off to the internet browser. Hitting Done goes straight to my problem.
The application opens into a black screen. Sometimes the backlight is on (noticed this is a 'feature' of the newer roms that has came out/updated within the last month). That's it. After hitting home to exit the application, I have noticed I get either dimmer horizontal strips of the screen or the screen has a ghost of the lighter portions of the screen image that slowly moves to the left. After a few seconds of this strangeness, the screen reverts back to normal. A few times I got the impression that the screen's dual layers having synchronization problems.
I'm about ready to give up and go back to the stock rom, maybe I'll even try the 'cleaned' versions before trying the rooted shooter stockers. If all else fails, I'll even try to use the full OEM installer and return the phone back to stock, if this is the only option left to get a working camera. I'd prefer to use a custom rom that allows undervolting/overclocking and has the fat trimmed off, but if I have to, I'll go back to stock rooted. ...now that I think of it, I started to have problems with the camera right after I applied the HTCDev Root method. And, yes I DID follow the instructions to the letter.
This is quite frustrating as I've have as yet to find a rom that has a working camera! I've already tried the following roms:
Shooter-Rewind-3D-RLS2.1+RLS3
WTSB_Evo3d_1.91
CleanROM_2.7
CleanROM_DE_1.2
Chogardjr3D-2.3.4-Stock
Chogardjr3D-Blue-v1.3
STEAL25_inbREDedROM_2.1clock
viperROM_RC1.3
viperROM_RC2_Rebuild_Test28
Android_Revolution_HD-Evo3D_CDMA_1.1.1 (current)
I haven't tried but already downloaded:
Gerbil-6-shooter_v.2.2.4
freEVO+3D+2.1
WTSB Hydro e3d 2.3 (want to try this one, but keep having problems downloading, the server keeps on downloading a 35kb index.html instead of the rom itself)
If the above roms fails, then I going to try reloading the rooted stock rom
shooter_2.08.651.2_cleaned_v0.4.2
Else one of these two...
Shooter_2.08.651.2_deodexed_rooted
Shooter_2.08.651.2_odexed_rooted
If all these fails, sigh, I gonna start over again with the full oem install...
PG85IMG_2.08.651.2.zip
And see if the camera still broken. If so, then gonna apply all OTA updates FIRST before applying the HTCDev root method again. This is the only thing I did not do before. If this doesn't work, I dunno what else to do then.
Any suggestions, rom-wise or camera-wise? I've been reading around and found a thread in the Amaze section that suggested that the camera problem might be kernel-level. Think this may also apply to the e3d?
I've been doing sleepless nights for the past 5 days already trying roms after roms and apk after apks. I'm about reaching the end of my thread (and patience) and figured it's time to ask the pros here on xda.
Thanks in advance...
-Lance (Lanaka)
Reserved for Fixed Post.
I forgot to upload my hardware/software specs. I'm out of time as I have to go to work, so I'll edit it onto this post during a slow period at work.
K here's my hardware/software specs:
---Hardware:
------Hardware Version: .. 0002
------Processor: ............ 1.2 GHz Qualcomm MSM8660 Dual-Core
------Memory: ............... 1GB
------Display: ................ 4.3 inch QHD resolution
------Main Camera: ........ 5Mpx*2
------Front Camera: ....... 1.3Mpx
---Software:
------Android Version: ..... 2.3.4
------HTC Sense version: 3.0
------Software number: .. Android Revolution HD 1.1.1 by mike1986
------Kernel version: ...... 2.6.35.14RCMIX-ACS-EVO3D-CR-V9-g98e7362-dirty
------------------------- [email protected] #6
------------------------- SMP PREEMPT Mon Oct 24 13:13:49 CDT 2011
------Baseband version: . 0.97.10.0808
------Build number: ........ 2.08.651.2 CL130920 release-keys
------Browser version: .... WebKit/533.1
------PRI Version: .......... 1.24_003
------PRL Version: .......... 10602
Bootloader:
------SHOOTER XC SHIP S-0N RL
------HBOOT-1.50.0000
------eMMC-boot
------Aug 7 2011,10:21:40
---Recovery:
------Team Win Recovery Project (twrp) v1.0.3
------Based on Android System Recovery <2e>
Any other information you need, lemme know and where/how get it.
Mahalo Much
-Lan
Infected eternity ROM works...
Sent from my 3vo
http://infectedrom.com/showthread.php/561-ROM-Eternity-2.3.4?p=10369
Sent from my 3vo
nearly ALL the ROMs you posted, nay, all of them, work - if they didn't there would be a hellstorm in those threads. My guess is it has to do with how you're flashing the ROM. Since you have hboot 1.5, customized kernels (which contain camera stuffs) do not fully apply in a normal flash. You need to first fastboot usb INTO recovery and THEN flash the ROM. That should work. Also, update TWRP to 1.1.1. Of course you'll need to do a wipe as well. Hope this works for you.
You might also want to try one of the many superwipes.
User error. Camera works on roms. Maybe ur phone is broken
Sent from my PG86100 using XDA App
I'd go with what il Duce said. You have to flash the kernel seperately. If you do decide to go back to stock you can always add su and also remove what you don't want.
Sent from my PG86100 using XDA App
fsu311 said:
Infected eternity ROM works...
Click to expand...
Click to collapse
Ok, I'll give it a try next after the ones I've already downloaded. I'm a methodical type of guy (don't like leaving thing left undone).
il Duce said:
nearly ALL the ROMs you posted, nay, all of them, work - if they didn't there would be a hellstorm in those threads. My guess is it has to do with how you're flashing the ROM. Since you have hboot 1.5, customized kernels (which contain camera stuffs) do not fully apply in a normal flash. You need to first fastboot usb INTO recovery and THEN flash the ROM. That should work. Also, update TWRP to 1.1.1. Of course you'll need to do a wipe as well. Hope this works for you.
Click to expand...
Click to collapse
That's what I'm figuring. I start reading the original set of posts, then randomly check out a few posts in the middle, and then read the last 10%. The roms i've picked mostly had either minor issues caused by misflashing or other user errors. A few actually said had an issue or two but nothing that'd stop me from giving the rom a try.
Yup, that's the MO I've been using as instructed in the following thread:
http://forum.xda-developers.com/showthread.php?t=1239821
I'll go thru the step-by-step process I used and you can nitpick where I went wrong,
I've placed a copy of adb.exe, AdbWinApi.dll, fastboot.exe and TWRP's recovery.img into folder c:\adb\
A little tip here, as I play with windoze XP a lot, a trick I used to eliminate the need to cd so much with cmd.exe. I did this after the 3rd ROM!
I place a shortcut link to cmd.exe into this same folder with the above files and exes. Next I open the Properties window for this shortcut, I made the following changes:
Start In: c:\adb
Comment: Starts cmd.exe in adb folder.
What happen is that cmd will open its window with the c-prompt already IN the same directory as my android files. Also, when i mouse-over the shortcut icon, it will popup a message reminding me that this link starts cmd.exe in adb folder.
Then I do the following:
I connect the phone to the laptop using the usb cable, set the phone to disk drive mode. Once Windows recognizes the volume and mounts it, I type the following:
c:\adb>adb reboot bootloader
After the e3d reboots into hboot, I then type the following:
c:\adb>fastboot boot recovery.img
downloading 'boot.img'... OKAY [ 1.250s]
booting... OKAY [ 0.000s]
finished. total time: 1.250s
Once TWRP loads, I then switch to the phone (WITHOUT disconnecting the phone from the laptop). Here on, I use the keys on the phone to navigate to the necessary functions. The proceedure I used mirrors what Steel25 suggested in the following thread:
http://forum.xda-developers.com/showthread.php?t=1269610
I initially thought it was an overkill, but figured probably wouldnt hurt to be safe than sorry.
If the installed rom is something I liked, I nand it first...
I then enter the Wipe Menu proceed to hitting each of the following:
Wipe Cache
Wipe Dalvik Cache
Wipe Everything (Data Factory Reset)
Wipe Battery Stats
Then I go to Advanced/Format Menu and hit each of the following:
Format SYSTEM (/system)
Format DATA (/data)
Format CACHE (/cache)
Format SD-EXT (/sd-ext)
Then I go back to top menu and enter Install Zip Menu, and first I hit:
Wipe Cache and Dalvik Cache
Then I enable:
Reboot After Successful Flash
THEN I:
Choose Zip To Flash
(Navigate to where the rom or app zip is located and select it.) Here I take a break and let TWRP does it thingy and check back on the phone in 5 minutes or so.
After recovery reboots the phone back into system, I let the phone sit on the lockscreen for 10 minutes to let the rom complete it's init process. Then I skip thru the entire initial setup prompts (altho I enter NO for Tell HTC). I reboot phone back into system, let it sit for another 5 minutes on the lockscreen before I hit the Android Market app to trigger the process of linking the phone to my google account. I then let my account sync. Once my new email icon pops up on the notification bar, I check out the camera. By the time I've hit the 3rd rom, I've had read about the camera problem possibly being a kernel level issue, I've since then added this step....
Menu/Settings/About Phone/Software information/More
Here I took note on whether the Kernel version info has changed as well. (And for the most part, yes, the kernel information DOES change with each rom).
K, now ye can start thrashing me...
-Lan
Drewmungus said:
You might also want to try one of the many superwipes.
Click to expand...
Click to collapse
I'll try that, altho I've never used it before. Even when I had my e4g, I never heard of this one until I started my current research on the e3d. Any particular one you'd (or anyone else'd) recommend?
Sigh, lotta work rooting and flashing the 1.50 e3d, compared to the good ol' e4g! >8p HTC!
Mahalo Much!
-Lan
cajones42 said:
Maybe ur phone is broken
Click to expand...
Click to collapse
Gods! I certainly HOPE NOT! It'd be a real b!atch if this proves to be the case.
Seriously, tho. I'm thinking it'd probably not be the case as I had the phone and was playing with it stock and unrooted for nearly a week and during the whole time, the phone's camera worked with nary a problem. That's why as a check value, I'm going to restore the phone back to stock unrooted state AFTER I try the last 4 roms I still have en-queued. This doesn't include the cleaned/rooted stocker, the full/rooted stocker nor the full OEM stocker.
-Lan
unCoRrUpTeD said:
I'd go with what il Duce said. You have to flash the kernel seperately. If you do decide to go back to stock you can always add su and also remove what you don't want.
Click to expand...
Click to collapse
Ok, I'll try that next. Altho, I gonna have to read up on how to prepare the kernel for flashing separately. Am I correct in guessing that I probably could get away with making a copy of the zip file and deleting everything in it except for boot.img, then adb boot into recovery and set the flag for check sign off before flashing the custom zip I just made? If that's not correct, mind pointing me to the apropos thread? (...or tell me what I need to do for separate flashing?)
If all else doesn't work, that's what I intend with the stocker roms. SU, TI, RE. Then time for me to research on where what and how to root out all the bloat meself. I'll worry about that later cuz I no need do that IF i can get a pre-made rom and kernel to take root in me e3d!
Mahalo Much!
-Lan
You DON'T have to flash the kernel seperatly using the boot.img method with HBoot 1.50. As long as you access recovery from fastboot you can flash everything normally & the kernel will stick. Just sayin'
SketchyStunts said:
You DON'T have to flash the kernel seperatly using the boot.img method with HBoot 1.50. As long as you access recovery from fastboot you can flash everything normally & the kernel will stick. Just sayin'
Click to expand...
Click to collapse
except he's already doing that and running into problems...
@OP - man you are wordy lol. Just a simple FYI, when you're phone is running and you hook up to usb with the intention of running adb, DO NOT turn on disk drive, leave it as charge only. Also, the way to flash the kernel as a stand alone is pull the "boot.img" from the ROM zip, put in your path, and then "fastboot flash boot boot.img". Also, there's an app made by dev "joeykrim" called "flash image gui" that allows you to flash kernels (boot.img) from your OS and is known to work with hboot 1.5.
il Duce said:
except he's already doing that and running into problems...
@OP - man you are wordy lol. Just a simple FYI, when you're phone is running and you hook up to usb with the intention of running adb, DO NOT turn on disk drive, leave it as charge only. Also, the way to flash the kernel as a stand alone is pull the "boot.img" from the ROM zip, put in your path, and then "fastboot flash boot boot.img". Also, there's an app made by dev "joeykrim" called "flash image gui" that allows you to flash kernels (boot.img) from your OS and is known to work with hboot 1.5.
Click to expand...
Click to collapse
Ah, didn't know that, mebbe that's why I'm having problems. I'll try reinstall one of the earlier ROM and see if there's any difference. If that doesn't fly, I'll try the kernel separately. I went with hard drive mode cuz I got actual confirmation the device was loaded. Charge only, didn't get any indication that the pc seen the e3d, sigh, noticed the sense and adb interface is rather ...crude.
Heh, wordy, that's what you get when you have an English major for a mother and an English/Japanese Translation Specialist (aka Cultural Attache in the US Army) for a grandfather...
I'll give joeykrim's flash_gui a try too. Just downloaded it. Cross fingers for luck. (roll eyes at 1.50)
Thanks dude, if I could, I'd hit yer thanks button again for good measure.
EDIT: clicked the button again...
Update: Back to work on problem...
Been a while guys. Unfortunately, work becons (or more accurately, intruded). Had to deal with a bunch of sht from my job. Things gone to the dumps there. Well, enuff of that.
In meantime, with my phone being activated and in use, I tried to tether (teeether, hehe) my e4g to my e3d and noticed I'm also having wifi issues. What rang a bell is when I noticed my wifi tether issues disappeared after I turned off 3G. It's like, heeeeey, didn't I read something like this in xda??? After doing some researching (on xda, of course ) I've learned that this is also a kernel issue, most often because the new kernel was not properly flashed in conjunction to having the correct matched kernel modules (wifi, CAMERA, 3g/4g, etc.) installed as well. On reading these, I went 'hmmm...' Looks like all of these issues others and I that have been experiencing are all kernel/module misflashes (no thanks to hboot 1.50). Where I think I hit pay dirt is when I found a xda thread that actually explains in depth Flash Image GUI, which was also mentioned earlier in THIS thread (thanks, il Duce).
So, I have downloaded the apk, installed it. Downloaded a new ROM (Olympus Trinity XE Version IV) STRAIGHT to phone...
Oh, just remembered. I've noticed another possible cause of problems. I've originally downloaded the various files from xda and then either push it to phone or more often just enable hardrive mode and drag/dropped it into the phones sdcard directly. Normally, I check the md5 hash on download, but yesterday, I ALSO checked the md5 hash again after moving it to the phone. Meaning, I downloaded ROM to pc, then checked md5 hash, all good. Copied ROM to phone and then checked md5 hash again. NOT good. Somehow, it changed during the copy process. What prompted me to check was I also downloaded Flash Image GUI to pc and copied it to phone and then had phone try install it. It failed to "parse" file correctly, which tells me that the file may have been corrupted. I downloaded Flash Image directly to phone and tried again, and success! Suspicious now, I checked the md5 hash of all three copies of the apk. The laptop downloaded and the phone downloaded copies matched the source's md5, while the COPIED version did NOT match! Whaaa Daaaa FFF(bleep!)!!! I then checked the two copies of the ROM (pc downloaded and phone copied) and they DON'T match!
Sigh. I'm in a area that has poor 3G connection, while ironically, my laptop's 4G was good.
So, I bit the bullet and endured the nearly hour long download of the ROM directly to phone and double checked the hash (which matched the pc downloaded copy, the source didn't provide a hash). THEN I used the Flash Image GUI app to pull the kernel and modules and pop it into phone. Immediately rebooted phone into recovery. Well, tried. Wished Flash Image GUI gave the option to reboot directly into recovery or bootloader, like those 4-/5-/6-1 Reboot options offered in the various ROMs. Because it just simple did a reboot back into System.
I didn't want to take chance with problems with mismatched ROM/kernels (I was on Android Revolution 1.1.1 at the time), so I quickly turned to adb on my laptop and had it reboot phone into recovery.
Once in recovery, I immediately started doing my usual ROM change process. Wiped using every wipe option (except for sdcard) in TWRP (oh btw, I also updated it to 1.1.1 earlier) in both the standard wipe and advanced wipe menus. Once I did so, I then thought, hey where did Flash Image GUI dump the kernels into? Couldn't remember whether it was DATA or SYSTEM. But decided that with Flash Image GUI it's ain't no hassle to reflash the kernel again after the ROM is installed. Besides, read somewhere that some issues was resolved after reflashing the kernel again after the ROM, so wouldn't hurt to try anyway.
Will let ye know how it goes, TWRP is installing Trinity XE as I type this. Gonna continue the SOP by letting it sit for 7-10 minutes. Skip thru init setup. Reboot. Let sit for another 7-10 minutes. Relink my google account. Let first Sync finish. (Basically let it sit again for another 7 minutes). Reboot. Hit Market and download Flash Image GUI, and pay for it, it's well worth IT!!! Flash the ROM's kernel/modules again. Reboot. And hopefully it should be a-ok!
(cross fingers ...on both hands)!
-Lance
PS: Assuming it's fixed, I'm gonna edit the second post and reflag this thread as resolved. Will put what I did to get it fixed, including all necessary links and credits as expected. I know it's premature, but THANKS, I wouldn't have gotten even this far without you guys (and gals) on XDA!
PPS: Also chris.goodman's AnthraX Kernel thread was also quite informative. Mebbe I'll try a ROM that features AnthraX. Somehow, the thought of being over-clocked to ~1.52G sounds appealing!
Hello,
I am very new to this rooting n' stuff for android phones. I have been using the past three days trying to get this to work, but everyone seems to have their own way of doing these things on, so it is really, really hard to follow a guide when the other guide for installing another kernel is using something from the root and is done a whole other way. I simply can't find head and tale in this anymore.
This is why I now, as a last resort, scream for your help!
I have successfully rooted my phone using revolutionary, and I do have the clockwork mod. I also got this superuser thing to work, so I do indeed have root access. I originally wanted to do this so I could overclock it, but that hasn't been working for me either.
But first things first...
I am having a lot of trouble with the clockwork mod. When I enter recovery in the HBOOT it works just fine, but ALL menu's won't work at all. What just happens is that all the letters disappears and only the background remains. I can press to power button again to get the text back, and I can choose between the menu's but even the power off menu just make the text go away and leave just the background. To get out of it I have to take the battery out of it.
I have tried to use the revolutionary once more to download the clockwork mod. Usually it says something like "What are you doing etc. etc." but now I just get "Waiting for device". It can't seem to get in contact with the phone anymore at all.
It can still boot just fine and works very good, and I can still use adb, so maybe I am just doing something totally wrong.
This problem came when I wanted to install another kernel, RCMix3D so I would be able to use the program set CPU I bought from google play. The method of "unlocking higher frequency" on the website for the application did not work, I only get a failure from the adb.
Essentially I just wanted the ViperROM but I can't find anywhere if it works for the GSM version or not. Since I am having trouble with the battery life it would be awesome with another ROM which saves more power than the stock one does. And with a kernel that would make me overclock it as much as I want would just be awesome.
But in my frustration I have now closed everything and I really hope you can point me somewhere with a guide for this exact thing, or write a quick one here.
But what firstly really pisses me off is the clockwork mod not working, how can I reinstall that without using revolutionary?
As I am a huge noob to this phone thing (first smartphone) I really need step by step instructions, but don't think I am incompetent. I work with both hardware and software each day, so I do indeed know a thing or two.
In big hopes of help,
Jesper
Hi Jesper,
I just have 2 quick questions.
Are you S-ON or S-OFF?
If you're S-ON, that's why you can't get the Overclock to work properly.
Second question, is it a GSM or CDMA EVO 3D? I'm going to guess GSM.
Also, you can boot into your ROM and get full SuperUser, correct?
If yes, download the 4EXT Recovery and install it from the ROM.
Once you download that and get it done, I'll help you out some more.
Thank you for your answer!
I have S-OFF, and my HBOOT is 1.49.1107 from revolutionary.
It is a GSM yes.
I do have full access using superuser. I have confirmed this because both Set CPU and ROM manager asks for this and can gain access.
I have also bought and installed 4EXT Recovery control 2.4.1
Jelle458 said:
Thank you for your answer!
I have S-OFF, and my HBOOT is 1.49.1107 from revolutionary.
It is a GSM yes.
I do have full access using superuser. I have confirmed this because both Set CPU and ROM manager asks for this and can gain access.
I have also bought and installed 4EXT Recovery control 2.4.1
Click to expand...
Click to collapse
Alright, that's great.
You didn't have to buy it, but it's ok.
Now, is all your stuff backed up so that you can flash a custom ROM?
Before you flash a ROM, make sure it is from the GSM section, you can't use one from CDMA or it will brick your phone.
Is there anything else you wanted to do?
DjDom said:
Now, is all your stuff backed up so that you can flash a custom ROM?
Before you flash a ROM, make sure it is from the GSM section, you can't use one from CDMA or it will brick your phone.
Click to expand...
Click to collapse
I do not need to back anything up. It is all on google's servers so I just have to sync it and it will be as it is now. I can't seem to find any good ROM's that prioritize battery life. My dock can't deliver much power so I need some power saving ROM for when it is in there and showing video, and then I would love to get it overclocked because many things just seems to be quite slow. A new ROM may just be enough, but still.
DjDom said:
Is there anything else you wanted to do?
Click to expand...
Click to collapse
Well, the ClockworkMod Recovery 5.0.2.0 still won't work. When I go to HBOOT then select recovery to get to the ClockworkMod I get the ClockworkMod menu, but nothing happens when I choose an option. It just shows the background and that's it. I have to take the battery out to power off the phone, even that option won't work.
EDIT:
Oh well, I played with that 4EXT and I got it installed instead of ClockworkMod. 4EXT works just fine for me, and awesome that it uses touch too.
Now I just need a ROM for better battery life and a kernel for overclocking. I can see that you have GSM too, can you recommend a good one for what I am looking for?
Jelle458 said:
I do not need to back anything up. It is all on google's servers so I just have to sync it and it will be as it is now. I can't seem to find any good ROM's that prioritize battery life. My dock can't deliver much power so I need some power saving ROM for when it is in there and showing video, and then I would love to get it overclocked because many things just seems to be quite slow. A new ROM may just be enough, but still.
Well, the ClockworkMod Recovery 5.0.2.0 still won't work. When I go to HBOOT then select recovery to get to the ClockworkMod I get the ClockworkMod menu, but nothing happens when I choose an option. It just shows the background and that's it. I have to take the battery out to power off the phone, even that option won't work.
EDIT:
Oh well, I played with that 4EXT and I got it installed instead of ClockworkMod. 4EXT works just fine for me, and awesome that it uses touch too.
Now I just need a ROM for better battery life and a kernel for overclocking. I can see that you have GSM too, can you recommend a good one for what I am looking for?
Click to expand...
Click to collapse
Well, I'm not very concerned about the battery, but I am using the KingCobra ICS Rom.
Try it out. Try a few ROMs.
You'll find something for you!
And just turn things off when you don't need them.
Use the task manager and disable data and such when not it use.
I can however say that I have better battery life with this ROM.
DjDom said:
Well, I'm not very concerned about the battery, but I am using the KingCobra ICS Rom.
Try it out. Try a few ROMs.
You'll find something for you!
Click to expand...
Click to collapse
I am just way too scared if it turns out it is not for GSM and I might brick it.
Also, when installing an ICS ROM, do I need to do anything else, or does the ROM just come with ICS and I will have that too?
DjDom said:
And just turn things off when you don't need them.
Use the task manager and disable data and such when not it use.
I can however say that I have better battery life with this ROM.
Click to expand...
Click to collapse
I tried that already, but my dock still can't give power enough. Within a few hours it loses 25% battery while playing video in the dock, even when connected to the AC adapter.
What about kernels? How do I install them? Just doing the "install zip from sd card" in 4EXT?
Since this is my very first time ever trying this I am very scared I may brick it
I've been trying to understand all the steps necessary to replace the OEM ROM in my HTC Amaze 4G phone, but I can only find a disjointed set of pieces about the various steps and not one overarching document that covers all the stages of custom ROM flashing. A lot of the docs are aimed at the "insiders" of the Android developer community and few to people like me who would just like to try something better than what that ICS update did to my phone.
Having dabbled at one time with Linux from version .98 to 2.6 and being software developer most of my working life, I figure this should be easy for me. Yet, I find the documentation frustrating. I only imagine what it must be for others with less computer experience than me.
Since Android is based on Linux, I don't understand the big fuss about rooting. In Linux having the rooting privilege simply meant having a root password. Why is Android so much more complicated than that? Also, loading a new Linux kernel used to be a fairly simple process if one used compiled modules. The installation script pretty much took care of it. Android totally obscures this process and the disjointed documentation doesn't seem to help much. A lot of it assumes certain knowledge by the reader as if he/she was also an "insider" in that circle.
On my part I would like to so the following steps documented:
1.) How to save user installed content and the factory ROM image before wiping it out so it could be eventually restored if needed.
2.) How to prepare the phone for installing a new ROM
3.) What new and stable ROM images will work with given phone and how to obtain them and in what form? Zip, rar, or what?
4.) In what SD Card directory or in USB-connected PC directory the new ROM should be.
5.) How the flashing process would look like? Expected phases and length?
6.) Do I need to lock the new ROM's root just as the factory ROM was? How would I do that?
7.) Any special issues when booting the new ROM for the first time?
8.) How would I restore the original factory ROM saved in step 1?
Some of you might think I ask too much from guys who do the dev work as a hobby but I always thought that if one does something, might as well do it right, regardless of pay.
Well, that's my 2 cents worth for the day.
Howdy. I'll try to answer some of the questions you asked.
I would also recommend talking with @ravike14 who can easily guide you through the back up and routing and s-off process. It's not that difficult really. The most bizarre thing for me was sticking a piece of wire into a hole in the back of the phone to short out a process to achieve s-off.
With the right recovery image installed, it won't matter where you place the Rom.zip. which may be named just about anything. But it will always be a zip file.
The important one is the PH85img.zip must be placed in the root of your external sdcard. That file is loaded when you boot into the bootloader. And is for updating firmware.
Once you have root, and have made a nandroid backup, flashing is easy.
If you download viper, it is vipera1.7.2.1.zip. you can have it anywhere on you internal or external sdcard.
If you use 4ext recovery, you can select install and it will take you to a directory that you can browse to the place where the Rom, whatever name it is, is stored.
Click the Rom zip file and you will be guided thru the install process, if it has an aroma installer, or it will just install otherwise.
Then reboot and go thru the set up as if it was a brand new phone.
If you don't do the s-off thing, 4ext offers a smart flash option. If you aren't s-off you can't just flash a Rom if it contains a kernel. So smart flash will be required.
There are a few guides in the dev section and the general section on how most of this process works.
Again, talk with ravike and he'll be glad to help. Plus the more people we can keep here and happy, the longer we will be creating roms and fun stuff to play with.
Regards,
Chevy
Sent from my HTC_Amaze_4G using xda app-developers app
Is there a good documentation for all ROM flash steps?
Thanks, Cowboy, for the helpful reply, though I don't see any HELP button to push that the end of your post refers to.
I think at this point I'd like to figure out on my own how to install a custom ROM, though I must say that your S-OFF reference is one of the things that confuses me because the HTC dev site itself spells out that it is not necessary to change S-On to S-Off. Go, figure ...
Also, I think I like what I've read about the Revolution ROM, so that's the one I'd like to install if that is working with T-Mo branded Amaze 4G phones, though mine is no longer locked to T-Mo.
Your welcome!
NWsoccerfan said:
Thanks, Cowboy, for the helpful reply, though I don't see any HELP button to push that the end of your post refers to.
I think at this point I'd like to figure out on my own how to install a custom ROM, though I must say that your S-OFF reference is one of the things that confuses me because the HTC dev site itself spells out that it is not necessary to change S-On to S-Off. Go, figure ...
Also, I think I like what I've read about the Revolution ROM, so that's the one I'd like to install if that is working with T-Mo branded Amaze 4G phones, though mine is no longer locked to T-Mo.
Click to expand...
Click to collapse
If you're using the web to look at xda, there is a thanks button on the lower left side of the screen before the very end of the post line.
If you're using the XDA app, you have to tap on my post, and it should have a thanks selection in the options that come up.
A few more suggestions.
1.) How to save user installed content and the factory ROM image before wiping it out so it could be eventually restored if needed.
A) one you are rooted you should be able to back up all of your user data through a nandroid which is available in TWRP or 4EXT recoveries. This will back up everything to be able to restore exactly like it was before you change roms.
(NRG is my ICS preference, and Afnan has a good modified stock rom. ARHD (revolution) is also a good one without too many frills.
2.) How to prepare the phone for installing a new ROM
B) again, Root - s-off (really a good idea and not too hard to do) - dev unlock - and Super CID
3.) What new and stable ROM images will work with given phone and how to obtain them and in what form? Zip, rar, or what?
C) any roms listed in the dev section in the Amaze forum works. And, they should all be Zip fles. You can restore somone elses nandroid back up, but not adviseable.
4.) In what SD Card directory or in USB-connected PC directory the new ROM should be.
D) anywhere (except the PH85IMG.zip MUST be on the root of your EXTERNAL sdcard)
5.) How the flashing process would look like? Expected phases and length?
E) There are two types of rom flashes, standard and Aroma (thanks @amarullz)
1) Standard just does it's thing and when it's done, it returns you to the recovery menu to reboot.
2) Aroma is a highly configurable installation (preferred for selections of different kernels and adding or removing apps, keyboards, cpu freq's and much more) after it's done, most often it can reboot directly from the installer. ARHD has this type of installer, also NRG roms, and mine!
6.) Do I need to lock the new ROM's root just as the factory ROM was? How would I do that?
F) all of the "Custom" rom's (even thought some may be stock) should be rooted. A rooted rom containd the busybox and super user bianaries and apps (IE chanfireSU or SuperSU)
7.) Any special issues when booting the new ROM for the first time?
G) You shouldn't have any issues when booting a new rom for the first time. Some do require a little bit of behind the scenes set up time. Most users see just the boot animation reach the end, or it may seem like it's not doing anything, but it's doing an unbelievable amount of background processing, dexopting, and some comminucation with the carrier for data and validation set up. Some may take five to ten minutes to complete depending on the amount of apps and goodies that are in the rom.
H) if you see the HTC logo for an extended amount of time, more than five minutes, and you dont see the boot animation (which varies by rom) then you are stuck in a preload loop. This happens when you flash a carrier specific rom without being "Super CID", or you may not have flashed the kernel (if you are S-Off this won't be a problem) because you didn't select smartflash from the recovery settings.
** I had issues trying to install ARHD at first because there is a firmware update, a requirement to be Super CID (probably the easiest of things to do), and some roms specify that you should be using TWRP recovery instead of 4EXT, or vise versa.
8.) How would I restore the original factory ROM saved in step 1?
I) nandroid restore There is also a rooted stock rom based off of the latest OTA ICS Update. It is just like the rom that comes preloaded, or updated to on stock non-rooted phones. If you go that route, flash the "Stock ICS" rooted rom and do an advanced nandroid restore and only restore your data. That will (should) get you back to where you started from but keeping root, S-Off, Dev unlock, and Super CID.
I rewrote some of what I noted befor so maybe other's can benifit from this knowledge. And I wanted to expand on a few items. All good questions!
There's a lot of things that happen in the background that people need to see sometime (pull a logcat) to see the crazy lines of code flying by on a terminal screen.
If more poeple took the time to understand all of this it would reduce the amount of errors while flashing and poeple would be more happy.
And in doing so I think people will learn more about what they are doing, and the more you do it, the better you get at doing it.
Enjoy!
Chevy
chevycowboyusa said:
If you're using the web to look at xda, there is a thanks button on the lower left side of the screen before the very end of the post line.
If you're using the XDA app, you have to tap on my post, and it should have a thanks selection in the options that come up.
Click to expand...
Click to collapse
I use the web for this and the only thing I see on the lower left side is a DONATE button. That's what you mean?
chevycowboyusa said:
A few more suggestions.
1.) How to save user installed content and the factory ROM image before wiping it out so it could be eventually restored if needed.
A) one you are rooted you should be able to back up all of your user data through a nandroid which is available in TWRP or 4EXT recoveries. This will back up everything to be able to restore exactly like it was before you change roms.
(NRG is my ICS preference, and Afnan has a good modified stock rom. ARHD (revolution) is also a good one without too many frills.
2.) How to prepare the phone for installing a new ROM
B) again, Root - s-off (really a good idea and not too hard to do) - dev unlock - and Super CID
Click to expand...
Click to collapse
Can I still use my phone after it is rooted but before the new ROM is installed? How would the phone behavior change on a rooted phone?
You did not comment on why the htcdev site recommends against the S-Off as not being necessary for installing a custom ROM.
chevycowboyusa said:
3.) What new and stable ROM images will work with given phone and how to obtain them and in what form? Zip, rar, or what?
C) any roms listed in the dev section in the Amaze forum works. And, they should all be Zip fles. You can restore somone elses nandroid back up, but not adviseable.
Click to expand...
Click to collapse
OK, I've got that. Does this Nandroid backup the entire image of the phone's content sector-by-sector, or as individual files? To the external SD card or to the PC connected by USB cable? BTW, why are all flashing procedures requiring loading of the HTC USB drivers when such drivers must be on the phone already? Otherwise we could not link the phone to PC in the first place.
chevycowboyusa said:
4.) In what SD Card directory or in USB-connected PC directory the new ROM should be.
D) anywhere (except the PH85IMG.zip MUST be on the root of your EXTERNAL sdcard)
5.) How the flashing process would look like? Expected phases and length?
E) There are two types of rom flashes, standard and Aroma (thanks @amarullz)
1) Standard just does it's thing and when it's done, it returns you to the recovery menu to reboot.
2) Aroma is a highly configurable installation (preferred for selections of different kernels and adding or removing apps, keyboards, cpu freq's and much more) after it's done, most often it can reboot directly from the installer. ARHD has this type of installer, also NRG roms, and mine!
Click to expand...
Click to collapse
Aroma? That doesn't smell too good to me.
chevycowboyusa said:
6.) Do I need to lock the new ROM's root just as the factory ROM was? How would I do that?
F) all of the "Custom" rom's (even thought some may be stock) should be rooted. A rooted rom containd the busybox and super user bianaries and apps (IE chanfireSU or SuperSU)
Click to expand...
Click to collapse
Oh, so this might answer my earlier question about how a rooted phone might behave. Essentially a user might not even know the difference, right? So, I could also do this process in two stages: First just root the factory ROM and use the phone that way till I am ready to actually flash the new ROM in the second stage, right?
chevycowboyusa said:
7.) Any special issues when booting the new ROM for the first time?
G) You shouldn't have any issues when booting a new rom for the first time. Some do require a little bit of behind the scenes set up time. Most users see just the boot animation reach the end, or it may seem like it's not doing anything, but it's doing an unbelievable amount of background processing, dexopting, and some comminucation with the carrier for data and validation set up. Some may take five to ten minutes to complete depending on the amount of apps and goodies that are in the rom.
H) if you see the HTC logo for an extended amount of time, more than five minutes, and you dont see the boot animation (which varies by rom) then you are stuck in a preload loop. This happens when you flash a carrier specific rom without being "Super CID", or you may not have flashed the kernel (if you are S-Off this won't be a problem) because you didn't select smartflash from the recovery settings.
** I had issues trying to install ARHD at first because there is a firmware update, a requirement to be Super CID (probably the easiest of things to do), and some roms specify that you should be using TWRP recovery instead of 4EXT, or vise versa.
Click to expand...
Click to collapse
I've got this.
chevycowboyusa said:
8.) How would I restore the original factory ROM saved in step 1?
I) nandroid restore There is also a rooted stock rom based off of the latest OTA ICS Update. It is just like the rom that comes preloaded, or updated to on stock non-rooted phones. If you go that route, flash the "Stock ICS" rooted rom and do an advanced nandroid restore and only restore your data. That will (should) get you back to where you started from but keeping root, S-Off, Dev unlock, and Super CID.
I rewrote some of what I noted befor so maybe other's can benifit from this knowledge. And I wanted to expand on a few items. All good questions!
There's a lot of things that happen in the background that people need to see sometime (pull a logcat) to see the crazy lines of code flying by on a terminal screen.
If more poeple took the time to understand all of this it would reduce the amount of errors while flashing and poeple would be more happy.
And in doing so I think people will learn more about what they are doing, and the more you do it, the better you get at doing it.
Enjoy!
Chevy
Click to expand...
Click to collapse
Thanks. I like your attitude about this.
When you get time stop by
XDA University.
I learned tons here its a great place to start and much better than trying to Google everything
http://forum.xda-developers.com/general/xda-university
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
been busy
NWsoccerfan said:
I use the web for this and the only thing I see on the lower left side is a DONATE button. That's what you mean?
Can I still use my phone after it is rooted but before the new ROM is installed? How would the phone behavior change on a rooted phone?
You did not comment on why the htcdev site recommends against the S-Off as not being necessary for installing a custom ROM.
OK, I've got that. Does this Nandroid backup the entire image of the phone's content sector-by-sector, or as individual files? To the external SD card or to the PC connected by USB cable? BTW, why are all flashing procedures requiring loading of the HTC USB drivers when such drivers must be on the phone already? Otherwise we could not link the phone to PC in the first place.
Aroma? That doesn't smell too good to me.
Oh, so this might answer my earlier question about how a rooted phone might behave. Essentially a user might not even know the difference, right? So, I could also do this process in two stages: First just root the factory ROM and use the phone that way till I am ready to actually flash the new ROM in the second stage, right?
I've got this.
Thanks. I like your attitude about this.
Click to expand...
Click to collapse
you're welcome! I wish everyone would try to learn this
and the university is also very helpfull as freakboy noted above,
I've been busy working at bringing the comunity the next greatest romz!
I am rooted and S-Off. I am using the ViperOne custom ROM for my phone.
The end goal is for me to update my firmware, because my phone has an over 10 minutes boot time normally. (Not an exaggeration. I have actually timed it with a timer.) I read that in order to fix this, I should try to update the firmware by going to stock recovery and doing an OTA update.
My TWRP has worked flawlessly for me over the years, but for some reason it won't work anymore. It will hang on the boot screen for over an hour. After that hour, I assumed it's not slowly booting. (As a bit of background, recovery would boot quickly while my phone still had problems with 10 minute boot times).
Another piece of information is that the last time TWRP worked was when I used it to install .zip files from Titanium to get all my apps working. That worked perfectly fine, my apps got updated, and no trouble. I wish I could say what happened between then and now, but from what I can remember, I just used my phone normally, such as using web browsers and games. I don't remember messing with any system files.
I do know that ClockWorkMod recovery DOES work if I flash that, but my nandroids are all on TWRP. I have tried to flash different version of TWRP as well. It doesn't seem to matter which one I flash, my phone reacts exactly the same.
Another thing to note, I'm not sure if it's significant or not, is that when I got into hboot, I get the following message for a split second. I can't read the file names exactly, but I got the extensions. Then I get the normal screen with the vol instructions and choices to go to fastboot, recovery, etc... The message reads:
SD Checking...
Loading [(something).zip]
No Image!
Loading [(something).nbh]
No Image or wrong image!
Loading [(something).zip]
Loading [(something).nbh]
No Image or wrong image!
I hope this is a decent amount of information. I tried to include as much as I could, but if I'm missing any critical details, let me know and I will GREATLY appreciate your help!
have u tried to rewrite the image, download the new TWRP and load it via adb
Bradl79 said:
have u tried to rewrite the image, download the new TWRP and load it via adb
Click to expand...
Click to collapse
Well, I did do that. I rewrote different versions of the image and none worked.
Sadly, my solution was to completely wipe my phone. More than the default factory reset.
I'm so it has been solved, but probably not in the most practical way for others with a similar problem.
Battletooth said:
Well, I did do that. I rewrote different versions of the image and none worked.
Sadly, my solution was to completely wipe my phone. More than the default factory reset.
I'm so it has been solved, but probably not in the most practical way for others with a similar problem.
Click to expand...
Click to collapse
Having the exact same issue. Attempted to install twrp-2.8.6.0-m8.img using adb, but TWRP never loads. I can load prior versions but same results. Going to HBOOT I get a bunch of messages related to 0P6BDIAG.zip, 0P6BIMG.zip
and some .nbh. I think it's looking on my SDCARD for those.
If you're looking to update your firmware, you can use an official RUU to change the firmware of your phone. You can read more about it in this stickied thread in the general forum to see if it fits your needs. If you decide to do this, your phone will be completely stock after the RUU finishes running so use fastboot to flash TWRP (or whichever recovery you prefer).
Regarding the messages you see in hboot, it will always check for those files if you have an external sdcard mounted. If they are present, you will be given the option to flash the update. If not, you will get regular hboot access after the check. It is completely normal and nothing to worry about.