First of all, I didn't know that I couldn't post a reply in development section.
due to a limit. This seems sucks.
I am currently using biffmod v1.3 and satisfied with most of features
except some bugs I noticed.
When I tried to connect to pc (windows 7 & windows 2003), the pc(s) couldn't detect my phone. so the phone is in charging mode.
Can anybody give me some hint for resolving this issue?
Thanks in advance.
Related
So I was hoping some of you guys could help me out.
Recently my Vibrant started to give me trouble with my computer. But it's only my vibrant with my computer. I can connect to any other computer no problem. Any other device is easily recognized by my computer except the vibrant.
It started after using PDANET's tethering app. I was at one point tethering all the time putting my phone in usb debugging mode and running pdanet on my computer. Then I also started using the bluetooth tethering. Once I finally got internet at my new place i stopped using the tethering option. But then I realized when i tried to get files off my phone my computer wouldnt recognized my phone anymore.
The error I get is
USB Device Not Recognized.
One of the usb devices on this computer has malfunctioned and windows does not recognized it.
Usb Root Hub Unknown device.
Try Reconnecting the device if windows still does not recognized it replace the device.
In the device manager the properties of the "unknown device" says
Status: Windows has stopped this device because it has reported problems. (Code 43)
I've tried the solution posted under here
USB Fix - Win7 x64 - USB Device not Recognized
and I've used both drivers from Samsung Kies and here
[Drivers] MS Windows x86 and x64 USB Drivers for Samsung Galaxy S
(Sorry can't post links apparently)
When I try to update the driver manually for the unknown device it says that it has already selected the best driver for the device. So i don't know if it really updated it.
Any Suggestions would be really helpful. Thanks!
espy1988 said:
So I was hoping some of you guys could help me out.
Recently my Vibrant started to give me trouble with my computer. But it's only my vibrant with my computer. I can connect to any other computer no problem. Any other device is easily recognized by my computer except the vibrant.
It started after using PDANET's tethering app. I was at one point tethering all the time putting my phone in usb debugging mode and running pdanet on my computer. Then I also started using the bluetooth tethering. Once I finally got internet at my new place i stopped using the tethering option. But then I realized when i tried to get files off my phone my computer wouldnt recognized my phone anymore.
The error I get is
USB Device Not Recognized.
One of the usb devices on this computer has malfunctioned and windows does not recognized it.
Usb Root Hub Unknown device.
Try Reconnecting the device if windows still does not recognized it replace the device.
In the device manager the properties of the "unknown device" says
Status: Windows has stopped this device because it has reported problems. (Code 43)
I've tried the solution posted under here
USB Fix - Win7 x64 - USB Device not Recognized
and I've used both drivers from Samsung Kies and here
[Drivers] MS Windows x86 and x64 USB Drivers for Samsung Galaxy S
(Sorry can't post links apparently)
When I try to update the driver manually for the unknown device it says that it has already selected the best driver for the device. So i don't know if it really updated it.
Any Suggestions would be really helpful. Thanks!
Click to expand...
Click to collapse
I have the same problem on my PC. I would plug in the phone and my mouse would stop working. No tethering app installed or anything.
Anyway, I just tried the ports on the back of the PC and those worked. Try a port closer to the MB
I've tried all my ports. It's still not recognized.
Check the cable and power source. Be sure cable is with good quality. I hade the same issue. I fixed it with original HTC cable and back panel USB from my deskop computer. Front USB of desktop computers often are not enough to power that consumption.
After updating to Froyo it started working again. Thanks though. I still have no clue what caused it.
Bumping to confirm, I found this thread after getting the same error. I had tried several of the USB ports on my computer but after reading this tried the 2 I hadn't yet, they both worked. Not sure why only those work now, but they do work.
Hope this helps someone.
I have a bricked galaxy s which doesn't do anything. Windows 7 reconizes an unknown device and it's not possible to install the samsung driver. Windows says that it allready has the right driver.
I can't seems to reincarnate my galaxy s. Only this small sign of live in windows 7.
It happened when I was flashing 2.3.5 and the connection went down just seconds after the start of flashing so I guess the bootloaders are corrupt.
Anyone any idea how to solve this one?
Vibrant UnBrickable Mod
The same thing is happening to my Vibrant. Tried Rooting and installing various ROMs and it is still "Not Recognized". Tried all ports on all PCs (4) and Laptops (1) and non of them work. espy1988, how did you upgrade to Froyo 2.2 if you could not connect to PC and Kies? This used to work without an issue.
Thanks
Tombias said:
I have a bricked galaxy s which doesn't do anything. Windows 7 reconizes an unknown device and it's not possible to install the samsung driver. Windows says that it allready has the right driver.
I can't seems to reincarnate my galaxy s. Only this small sign of live in windows 7.
It happened when I was flashing 2.3.5 and the connection went down just seconds after the start of flashing so I guess the bootloaders are corrupt.
Anyone any idea how to solve this one?
Click to expand...
Click to collapse
Like said above u might need to be debricked.
seems like ur phone is hard bricked.
---------- Post added at 04:33 AM ---------- Previous post was at 04:26 AM ----------
have u tried Odin back to stock using Odin or hemidal ?
I have the same problem now. I have had my Vibrant for over a year never with an issue. I have Odined it back to JFD dozens of times but now it will not recognize the usb device.
I have GB bootloaders, but never a problem before. When changing Roms I usually Odin back to JFD first and start clean.
My problem started with the phone getting stuck in landscape mode. I was running a 2.3.4 GB rom Sensation. I reflashed a few times but whenever a restored anything from Titanium it would revert back to landscape only. I decided to go back to a 2.2 rom and plugged in the phone to Odin and it was not recognized, also not as a mass storage device, no go. I used Samba to copy a 2.2 rom, Trigger, to the phone and flashed from there. The phone is good now except the computer still won't recognize it. I can use Samba to access the SDCard but I hate not being able to use Odin if things go south. Tried all usb ports and a new cable, no go. Really wierd.
Looking for suggestions......
If you're still under warranty claim it & send it.
Had same problem. There is no fix short of replacing USB port.
I found my problem. It was dirty/corroded usb port. I carefully cleaned it out (took a few times) and it's all functioning again. I also cleaned the contacts on my original usb cord and it is working again also.
I'm just now having this problem for the first time. I've tried all USB ports and cleaning the port on the phone with no luck so far. Can someone point me to the unbrickable mod mentioned early in this thread?
jnusz said:
I'm just now having this problem for the first time. I've tried all USB ports and cleaning the port on the phone with no luck so far. Can someone point me to the unbrickable mod mentioned early in this thread?
Click to expand...
Click to collapse
Have you tried installing the installing/re-installing the Samsung drivers (LINK), using another USB cable, or even another computer? I just want to make sure you've tried it all before attempting to do a hardware mod.
Anyhow, you can find a link to the unbrickable mod and other hardware mods in the "Official XDA Vibrant Bible Thread", under the "MODS/SCRIPTS" section (LINK).
Mine is the cable btw. My wife has a GSII and I was able to use her cable.
Hi guys. I am in need of a little help.
This started last night. My HD2 has SPL-1.42 and has done since it was released. I am not a noob at flashing roms or indeed running Android Roms. I regard myself as being a bit of a geek and a bit technology savvy. Anyway....
Last night I flashed a new Rom (Energy.Leo.21916.Sense2.5.Cookie.sencity.Nov.30) all was going well. I flashed this rom as I liked previous roms by this chef and also to try and solve my email not being received problem. Unfortunately, emails still didn't work. Not a problem I thought, I will just used Android for my emails. Unfortunately for me the build I installed last night after installing the Energy Rom was slow and laggy for me. So I thought to myself that I would install a new WM rom this evening and the latest MDeejay Android Rom afterwards. So I went about the usual scenario of connecting my HD2 to Laptop in activesync mode(without Enable Faster Connection enabled(this is normal for me) but all I get from Windows is USB Device not recognised. I have tried with enable faster connection enabled, reinstalling Mobile Device Centre, different cable, different USB port, different PC, reflashed a rom via SDCard(transfered LEOIMG to SDCARD via adapter and run from SPL Bootloader). I even get the error when running Android. I have also checked the USB port on the HD2 for dirt, but nothing.
Can anyone suggest anything or is my HD2 knackered?
Thank you
Seg
I installed the Axura 2.2.5.9 froyo rom, im a bit of a newb so I apologize in advance if this should have been asked in the Axura rom thread but I think its more a "general" question then rom specific.
Ok so I tried to get the froyo usb tethering to work on my pc, its win xp sp3. I had and still have Easytether installed and it works fine. Yes, I exit'ed out of Easytether on both my vibrant and pc before trying to stock usb tethering. I installed the proper drivers and turned on usb tethering. I downloaded the proper .inf file from android.com/tether or whatever it was.
The problem im having is, I cant seem to install the .inf file. When I plug in the usb cable nothing pops up to install new hardware. However, the very first time I plugged my phone in after installing froyo something popped up about new hardware buy me being me I closed out of it. The android faq site told me that when the new hardware pops up to select the .inf file I downloaded but I cant seem to get it to pop up again.
Can anyone help me? I also tried going to add hardware in the control panel and the phone/usb hub wasnt listed.
Thanks in advance!!
Nobody can help me????
Installed Froyo (vai mini Kies) on one machine and tried to tether on a different laptop. I had no luck with any of the .inf files I could find on the Samsung site or discussion boards. Installed the Vibrant Mini Kies for T-Mobile and the device installed automatically the next time I enabled tethering.
I used Kies_Mini_For_Vibrant_10095_9.exe (XDA will not allow a new user to post a link)
From what I know, the stock USB tethering in Froyo doesn't work with XP. It only works with Vista & Windows 7. I forget where I seen this, but I'm for sure it doesn't work on XP.
I can tell you (from experience) that tethering DOES work with Windows XP. The only glitch was getting the right driver, which is contained in the Mini Kies install.
Kalama83 said:
From what I know, the stock USB tethering in Froyo doesn't work with XP. It only works with Vista & Windows 7. I forget where I seen this, but I'm for sure it doesn't work on XP.
Click to expand...
Click to collapse
Please forgive me if I've missed a post somewhere, I've been searching for weeks for an answer to my problem and I still don't see one (similar cases, but either a-no answer or b-solution for another problem).
Computers:
A Windows 7 (32-bit) system and a Windows XP (32-bit) system.
Phone:
Samsung Vibrant SGH-T959
Firmware Version: 2.2
Baseband Version: T959UVJL5
Kernel Version: 2.6.32.9
Build Number: Nero.v3
Description of Problem:
When I plug my phone into either or my two computers the following occurs - My phone recognizes that it is plugged in and begins charging; my computers do nothing.
When I was on Android 2.1 I could plug my phone into either of my two systems and my PCs would respond appropriately (ie. show the drive letters and let me access the device once I mounted the device).
Since the very first Android 2.2 install my computers act like nothing is happening. ADB doesn't see my phone, Odin is silent, and Windows doesn't show any drive letters nor does it even show that I am plugging in a USB device.
I have tried to correct this by changing the USB settings on the phone (Kies, Media Player, Mass storage, Ask on connection) and even trying to connect while in debug mode. Sadly, I never made a nandroid backup to take me back to the Android 2.1 install (idiot me took the plunge before reading up on that section).
I don't understand what would cause my phone to be treated as if it wasn't there. I've tried different USB ports, different MicroUSB cables, and even uninstalling/reinstalling the various device drivers for the phone.
I can get into download mode just fine, but what's the point if Odin can't see the phone since Windows thinks that nothing is there? Before you ask, yes, I tried going into download mode before starting Odin as well as after starting Odin; debug mode on and debug mode off. I've been trying all the combinations.
If anybody has any information beyond what is in the stickies, I would greatly appreciate it!
Do you see "USB connected" in notification bar on the phone? You can also turn on USB debugging mode in USB settings. If you see "USB connect" in pull down notification bar..tap on that and it will mount on your computer.
I experienced similar problem with.axura tool...phone well charge but doesn't pop out the mount notification. I power off both my phone and computer and it work again. I'm sure this won't on your scenario but just wanna inform you that it's not all hopeless...good luck
Yes. I have seen the mount USB bar. Bad news: even after it says mounted, the PCs react as if nothing has happened.
Sent from my SGH-T959 using XDA App
First of all, read this forum (last post is mine) http://forum.xda-developers.com/showthread.php?t=925393 - make sure you have kies or kies mini installed so that you have the correct drivers on your computer for your vibrant.
secondly, team whiskey has developed a fix for the mount issue your experiencing: http://forum.xda-developers.com/showthread.php?t=846384&highlight=mount+fix
they also have the mount problem fixed in the later nero roms... should not be an issue. please let me know if this helps!
in_dmand said:
First of all, read this forum (last post is mine) http://forum.xda-developers.com/showthread.php?t=925393 - make sure you have kies or kies mini installed so that you have the correct drivers on your computer for your vibrant.
secondly, team whiskey has developed a fix for the mount issue your experiencing: http://forum.xda-developers.com/showthread.php?t=846384&highlight=mount+fix
they also have the mount problem fixed in the later nero roms... should not be an issue. please let me know if this helps!
Click to expand...
Click to collapse
Okay, so I've tried all of the above to no effect except for the latest Nero rom...
Looks like I'll be trying the latest Nero (thank goodness for Dropbox).
Nope. Updating to the latest Nero [v5] didn't work.
Anyone else?
Nvm... gl with fixing it.
All~G1 said:
Nvm... gl with fixing it.
Click to expand...
Click to collapse
I think I'm going to have to throw it under a bus...
This same thing happened to me and to fix this problem all I did was install the drivers I got online, PM me your email and ill send you the drivers
I am almost certain that it is drivers issue more than your phone or any rom. You need to completely uninstall current drivers..all traces of em, reboot and install drivers from samsung website or there are some here in vibrant section also. It happened to me couple of times where one set of drivers stopped working for no reason and i had to try couple of different ones.
I had the same problem. Phone would charge but not connect. I solved it by getting a new usb cable. I just use the bad one for charging now
Sent from my SGH-T959 using XDA App
This is a driver problem. Your computer does not have the phone drivers and is confused on what to make of your phone so it finally decides that it is a charging device more or less and will not mount it, EVEN if you select mount from your phone options.
Please look on this forum or ask the guy who posted before for the Samsung USB drivers. Install them on your computer and then mounting the phone from the notification bar will work.
Hope that helps and feel free to ask again if you are stuck on the process.
I thought it was a driver issue as well until last week.
My coworker has the same model phone and is currently running 2.2.
He has his laptop (Windows XP) setup to handle his phone.
When he plugs his equipment in, everything works. When he plugs my phone in, same old story...
Even when trying different MicroUSB cables.
This is why I'm considering loading up a different/modified kernel.
Sent from my SGH-T959 using XDA App
Hey all,
I'm having real issues with my phone at the moment, I bought a PC from the college I work at, as they were upgrading and installed a fresh copy of Windows XP 32bit onto it, I am currently running Resurrection Remix 2.4, I wanted to be able to USB tether my phone to the PC whilst I am switching broadband providers, but when I try to connect it, both the phone tells me that the USB isn't connected and the PC doesn't pick it up either.
I tried downloading the USB drivers for the S2 to my USB stick at work and installing them that way, with no joy, I've tried flashing back to 2.3.5 (CheckROM Revo HD V6) other ICS ROMs and turning off USB Debugging but still nothing.
What can I do to sort this all out? I've searched all over Google and XDA, but I have yet to find a solution, any advice anyone can give me would be much appreciated.
Beans
Sent From My Resurrected I9100