hi guys.i have one problem by gdx v.18.Since come back the kernal dx to Kernal sony ericsson, wi-fi not working. i dont want full wipe.what do i??please help me.
sorry for bad english
Try reinstalling rom without full wipe
Follow these steps
1.Reinstall GingerDX (without full-wipe)
2.Wipe Cache partition
3.wipe Dalvik-Cache
4.(optional) wipe battery-stats
5.Reboot
Note: first boot will take longer
if the problem persist do
1.Backup all your apps and data using (MyBackup/Titanium Backup)
2.Open Flashtool
3.flash your kernel (linuxdx or stock)
4.Reinstall GingerDX
5.Full Wipe
6.Reboot
Best Regards,
Superuser.Angga
Related
HI THERE EVERYONE!!! ive been a symbian user for years, but when i change to android got inlove with it. im currntly on WB voo8.1 2.2, have no problem with it flashing and rooting it. now im so exited for the GB update, i already download all files needed for WB tweak. after that of course i change to v8 to GB (tried it) installed thru xrecovery and followed steps in flashing 2.3
but when i rebooted after flashing my x10 stayed at the boot logo of sony ericssons. made me sad.......
can anyone pls help me with this tried posting at WB thread but since im a new user it said that i can post there. can sum1 pls help me here or any1 here from the same country.. im from the philippines. pls guys help me..
hve u flashed ftf file from flashtool...???
Ok here u are
Now go to xrecovery and do following steps
wipe user data full wipe
wipe cache partition
wipe cache
wipe dalvim cache
flash the rom
if now u get stuck on boot logo, just go to xrecovery wipe.cache and dalvik cache and the problem will gone.
Send from my own MIUI Final by Oskar.K X10 .
re. help pls..
yes i did that.
1. backup using xrecovery
2.did the following in xRecovery
-Factory Reset
-Wipe Cache Partition
-Format Cache
-Wipe Dalvik Cache
3.install WB gb zip
4.remove battery then put it back for a while
5.flashed ftf file using flashtool
6.reboot then stuckedddd.
do i need to download a newer flash tool? the one that i currently use is the that i use flashing baseband needed for WB v8.
ok ill give it a go again hehehe. im currently on 2.1.b do you guys think its an issue? and another one im using openvpn for my internet and subscribe locally at our local site here at my country. do you think that my tun.ko would work? badly need internet at my work and at home internet providers at our place sucks by the way because our place its not that develop when it comes to tlephone and internet.
knive13 said:
yes i did that.
1. backup using xrecovery
2.did the following in xRecovery
-Factory Reset
-Wipe Cache Partition
-Format Cache
-Wipe Dalvik Cache
3.install WB gb zip
4.remove battery then put it back for a while
5.flashed ftf file using flashtool
6.reboot then stuckedddd.
do i need to download a newer flash tool? the one that i currently use is the that i use flashing baseband needed for WB v8.
Click to expand...
Click to collapse
no dude u need latest BB .71 its in the WB ROM's thread.
yeAah i have it too followed the steps installed wiped needed things to be wiped then inatall custom WB zip,i didnt reboot then removed battery for a while then flashed ftf file on WB thread after flashing turn on phone then stucked at SE logo.
ill try to repeat the steps again hope fully i wont get the same result.. thanks to you guys. ill update u guys once i made it work. again lots of thanks to you guys its well aprreciated.. =)=)
I have unlocked my bootloader properly.I am on prerooted stock kernel and WB v4.I am trying to install WBv5 custom kernel on it.After flashing my phone doesnt boots up.It gets stuck on bootscreen.Can any one guide me to the correct method to get it work?
Thanks
Try install wb stock kernel version.
Its work great here.
Custom kernel in unlocked BL still have deepsleep issue, thats why i advice you to flash doom advance stock and wolf stock version.
Sent from my X10i using XDA App
I have a similar problem. I think my phone is incompatible with DoomKernel. What I did was flash a different custom kernel and so far it's working okay.
Hi guys, I advice to restart all in zero.
http://forum.xda-developers.com/showthread.php?t=936733
1. Flash 2.3.3 with flashtool 3.0.0
http://forum.xda-developers.com/showthread.php?t=920746
2. Flash with downgrade kernel and start you phone then root after reboot remove battery.
http://azuzu.spice.net.au/tools/X10_GB_Root/X10_aZuZu_Kernel_Downgrade_Generic.ftf
3. Flash with Upgrade kernel.
http://azuzu.spice.net.au/tools/X10_GB_Root/X10_aZuZu_Kernel_UpGrade_Generic.ftf
4. Install xrecovery 0.3 choose 0.3GB
5.Install WB 0.5, factory Reset (Full wipe), wipe Cache Partition, wipe Dalvik Cache, reboot
http://forum.xda-developers.com/showthread.php?t=1192988
6.Flash Doomkernel (choose overclocked or not. Warning : Overclocked drain a lot battery).
Flash via recovery wifi modules(If you change rom, you must to flash wifi module after install your rom)
http://forum.xda-developers.com/showthread.php?p=17526480#post17526480
Factory Reset (Full wipe), wipe Cache Partition, wipe Dalvik Cache and battery stats.
Asgarth974 said:
Hi guys, I advice to restart all in zero.
http://forum.xda-developers.com/showthread.php?t=936733
1. Flash 2.3.3 with flashtool 3.0.0
http://forum.xda-developers.com/showthread.php?t=920746
2. Flash with downgrade kernel and start you phone then root after reboot remove battery.
http://azuzu.spice.net.au/tools/X10_GB_Root/X10_aZuZu_Kernel_Downgrade_Generic.ftf
3. Flash with Upgrade kernel.
http://azuzu.spice.net.au/tools/X10_GB_Root/X10_aZuZu_Kernel_UpGrade_Generic.ftf
4. Install xrecovery 0.3 choose 0.3GB
5.Install WB 0.5, factory Reset (Full wipe), wipe Cache Partition, wipe Dalvik Cache, reboot
http://forum.xda-developers.com/showthread.php?t=1192988
6.Flash Doomkernel (choose overclocked or not. Warning : Overclocked drain a lot battery).
Flash via recovery wifi modules(If you change rom, you must to flash wifi module after install your rom)
http://forum.xda-developers.com/showthread.php?p=17526480#post17526480
Factory Reset (Full wipe), wipe Cache Partition, wipe Dalvik Cache and battery stats.
Click to expand...
Click to collapse
If you have an unlocked bootloader, then you don't need azuzu's rooting method, just simply flash the doom kernel v5 through flashtool then install your favourite custom rom.
Sent from my X10i using XDA App
I have installed minicm7pro v20 on my x10 mini pro..... Plzzzzzzzz tell me how to install v21 in detail
Do the same way.
dees i have to install 2.1 first or just istall with v20 only..... and also does i have to wipe all data n cache???????
deanshu93 said:
dees i have to install 2.1 first or just istall with v20 only..... and also does i have to wipe all data n cache???????
Click to expand...
Click to collapse
Why would you need to go back to 2.1 ? Just follow the instructions I the thread it'll tell you if you need to wipe or not but you probably will.
Sent from my E15i using xda premium
I have to upgrade to v21 of ROM i have v20..... in the thread it is there you should have 2.1 installed...... How to install another version of same rom (v21 from v20)?????
Good lord.
1. Enter into recovery. for the love of god, dont ask us how to do that.
2. wipe data/factory reset
3.wipe cache.
4. advanced> wipe dalvik cache [and battery stats, if you want]
5. install custom .zip > select the minicm7 Prov21.zip from sd card
6. use your brains.
I installed Shin Engine v3 and SE V5 but both dont worked. I followed that steps:
"Installation
Download Rom and copy to Sd card
Reboot into CWM Recovery
enter Mount and Storage -> /format system
Wipe data/factory reset -> Wipe cache partition enter Advance -> /wipe dalvik cache /wipe battery stats
Flash ROM = wait until finish
Reboot. Done". That you can get it here. "http://forum.xda-developers.com/showthread.php?t=1551522"
I unlock root and bootloader, installed nAa 11 Kernel.
Then after I install the rom I reboot and then the cellphone keep rebooting infinitely.
What can I do?
Flash Alfs v08a CM7 no FPS cap version(optional, but always working+better performance). I tried these ROMs and they worked. However, if you use an ICS ROM like ShinEngine V3(not BostonEngine v5), you MUST use nAa ICS kernel!! Otherwise it won't work for you. If you have the correct kernel, correct ROM and still not working, try reflashing the ROM and NOT wiping everything and vice versa.
Good luck!
i have flashed Achotjan_4.1.2_Somc_Debrand_Engine_V1.0_RC3_x10 on my x10i but now my x10 wont open i did everthing what achotjan wrote for installation. first my x10 ask first time simlock after that reboot by itself and now not open am i bricked my x10 or what can i do. sorry for bad english
INSTALLATION
Flash 4.1.2 SDE Kernel "
Go to CWM Recovery
Do a factory reset
Wipe Cache Partition
Wipe Dalvick cache
Format System
Format Data
Format Cache
Flash the dowloaded ROM package via CWM Recovery (the rom you downloaded in this thread)
Reboot
now phone is starting but there is only kernel amblem after that green light turn white
Format System
Format Data
Format Cache
is this normal to flashing
hi i have flashed with this rom's kernel and now phone is working
http://forum.xda-developers.com/showthread.php?t=1767916