I have unlocked my bootloader properly.I am on prerooted stock kernel and WB v4.I am trying to install WBv5 custom kernel on it.After flashing my phone doesnt boots up.It gets stuck on bootscreen.Can any one guide me to the correct method to get it work?
Thanks
Try install wb stock kernel version.
Its work great here.
Custom kernel in unlocked BL still have deepsleep issue, thats why i advice you to flash doom advance stock and wolf stock version.
Sent from my X10i using XDA App
I have a similar problem. I think my phone is incompatible with DoomKernel. What I did was flash a different custom kernel and so far it's working okay.
Hi guys, I advice to restart all in zero.
http://forum.xda-developers.com/showthread.php?t=936733
1. Flash 2.3.3 with flashtool 3.0.0
http://forum.xda-developers.com/showthread.php?t=920746
2. Flash with downgrade kernel and start you phone then root after reboot remove battery.
http://azuzu.spice.net.au/tools/X10_GB_Root/X10_aZuZu_Kernel_Downgrade_Generic.ftf
3. Flash with Upgrade kernel.
http://azuzu.spice.net.au/tools/X10_GB_Root/X10_aZuZu_Kernel_UpGrade_Generic.ftf
4. Install xrecovery 0.3 choose 0.3GB
5.Install WB 0.5, factory Reset (Full wipe), wipe Cache Partition, wipe Dalvik Cache, reboot
http://forum.xda-developers.com/showthread.php?t=1192988
6.Flash Doomkernel (choose overclocked or not. Warning : Overclocked drain a lot battery).
Flash via recovery wifi modules(If you change rom, you must to flash wifi module after install your rom)
http://forum.xda-developers.com/showthread.php?p=17526480#post17526480
Factory Reset (Full wipe), wipe Cache Partition, wipe Dalvik Cache and battery stats.
Asgarth974 said:
Hi guys, I advice to restart all in zero.
http://forum.xda-developers.com/showthread.php?t=936733
1. Flash 2.3.3 with flashtool 3.0.0
http://forum.xda-developers.com/showthread.php?t=920746
2. Flash with downgrade kernel and start you phone then root after reboot remove battery.
http://azuzu.spice.net.au/tools/X10_GB_Root/X10_aZuZu_Kernel_Downgrade_Generic.ftf
3. Flash with Upgrade kernel.
http://azuzu.spice.net.au/tools/X10_GB_Root/X10_aZuZu_Kernel_UpGrade_Generic.ftf
4. Install xrecovery 0.3 choose 0.3GB
5.Install WB 0.5, factory Reset (Full wipe), wipe Cache Partition, wipe Dalvik Cache, reboot
http://forum.xda-developers.com/showthread.php?t=1192988
6.Flash Doomkernel (choose overclocked or not. Warning : Overclocked drain a lot battery).
Flash via recovery wifi modules(If you change rom, you must to flash wifi module after install your rom)
http://forum.xda-developers.com/showthread.php?p=17526480#post17526480
Factory Reset (Full wipe), wipe Cache Partition, wipe Dalvik Cache and battery stats.
Click to expand...
Click to collapse
If you have an unlocked bootloader, then you don't need azuzu's rooting method, just simply flash the doom kernel v5 through flashtool then install your favourite custom rom.
Sent from my X10i using XDA App
Related
HI .. I TRY TO INSTALL MIUI ..
1) flash by odin xxkk5
2) flash cf root
3) poot to sdcard the miui zip file
4) i do full wipe and install the zip
when my SGS2 turn on he stuck and do reboot , stuck and do reboot ..
Problem !.
Try flashing the rom a second time.
Sent from my GT-I9100 using Tapatalk
Have you done this prior to installation?
Wipe Data
Wipe Cache
Wipe System
Wipe Dalvik Cache
then install ROM...twice if first failed.
If there's still a problem, redownload the ROM.
Flashing stock Samsung ROM is still flashing a different ROM, you're not going back to the real stock as you are still running a ROM, in this case Samsung's ROM.
View attachment SuperWipe_SGS2.zip
flash that in recovery first to wipe eveything then flash the rom and wipe dalvik then reboot and let it sit for 5 - 10 min then reboot again
I'm trying to install a KA07 Xperia SSpeed Rom.
But i stuck at boot animation.
What i did?
Unlocked the Bootloader.
Flashed Xperia S .76 FTF.(It is booting).
Then flashed the Advance stock kernel form DOOMLord.
Booted into .76 FW,its working.
Then Rebooted into recovery.
Wiped Dlavik Cache.
Wiped Factory Reset.
Installed KA07_Xperia_SSpeed.zip
But it stuck at boot animation.
Why?
hello (and sorry for my bad english)
try this (that's what i do and it's ok) :
-flash76 ftf with flashtool and reboot for a while (10mn, try if all is ok)
- flash 76 preroot with fastboot and reboot for a while...
- install doom kernel (v1a, wifi modules, etc...v4a...aroma..) and boot for a while
-boot in doom recovery for wipe dalvik cache and install ka07 with aroma...
-boot for a while, try the rom,
-boot in recovery and format cache, wipe dalvik
I have done this and , for my phone, all is ok...
I have read some people have installed first the ka6 then ka7...
I wish it can help you...
I installed Shin Engine v3 and SE V5 but both dont worked. I followed that steps:
"Installation
Download Rom and copy to Sd card
Reboot into CWM Recovery
enter Mount and Storage -> /format system
Wipe data/factory reset -> Wipe cache partition enter Advance -> /wipe dalvik cache /wipe battery stats
Flash ROM = wait until finish
Reboot. Done". That you can get it here. "http://forum.xda-developers.com/showthread.php?t=1551522"
I unlock root and bootloader, installed nAa 11 Kernel.
Then after I install the rom I reboot and then the cellphone keep rebooting infinitely.
What can I do?
Flash Alfs v08a CM7 no FPS cap version(optional, but always working+better performance). I tried these ROMs and they worked. However, if you use an ICS ROM like ShinEngine V3(not BostonEngine v5), you MUST use nAa ICS kernel!! Otherwise it won't work for you. If you have the correct kernel, correct ROM and still not working, try reflashing the ROM and NOT wiping everything and vice versa.
Good luck!
hi i installed a rom ported from xperia s but nothing is working in it...i mean no menu options no settings or nothing....i donk know why..can anyone help me out with this..the installed rom link is down here..i even have the required kernel for that and even flashed that kernel before flashing the rom....
http://forum.xda-developers.com/showthread.php?t=1782771
Vasisht Reddy writes:
1) Flash rom-003 and launcher
2) Now reboot, let the rom settle and reboot to recovery
3) Now flash rom-005
4) now reboot, let the rom settle.
5) Again finally reboot to recovery and flash addon pack
Before you install the CWM you wipe data / factory reset wipe Dalvik cache.
Otherwise, follow the instructions.
Hi, newbie here. I have trouble with wifi. My phone is Xperia P
I installed aospa rom, at the beginning everything was fine but few hours later I couldnt turn wifi on. I didint know what to do, so I just factory reset the phone. Same thing happened.
Then I installed Blur Line (CM 11) rom, same thing happened again.
On advanced setting it says Mac adress unavailable (idk if this is related with problem)
I searched google and xda for possible solutions.
solution 1 is installing sqlite editor and changing "wifi_display_on" value to 0
this didnt work because it was already 0
solution 2: settings/wi-fi/advanced/wi-fi region code
this didnt work too. I select Turkey (I live in Turkey) but whenever I exit settings and turn back none of the region is selected.
solution 3: copy WCNSS_qcom_wlan_factory_nv.bin file to somewhere
it is on motorola atrix hd thread, so idk if this can work for my phone too. I downloaded it but havent tried yet
Do you think it can work for my phone, or is there any "wifi fix file" for Xperia P
What sould I do now? Should I install another rom (slimkat, pacman, miui v5) or is there any solution for fixing wifi?
Thanks for replies.
Describe the steps you followed to install the ROM.
hliasant said:
Describe the steps you followed to install the ROM.
Click to expand...
Click to collapse
My phone was on stock rom, rooted and cwm installed.
First I unlock bootloader via flashtool, then I flash the boot.img via flashtool
I flash the rom and gapps with cwm (wipe cache, dalvik, factory reset) but then I flash the rom with twrp (wipe data, cache etc) again.
i dont know if I wipe some important data
formerly I installed some stock base roms via cwm, and I didnt wipe anything extra this time
I backuped TA partition before unlock bootloader. Is wifi work if I relock bootloader and flash stock rom & kernel
Fenomenon said:
My phone was on stock rom, rooted and cwm installed.
First I unlock bootloader via flashtool, then I flash the boot.img via flashtool
I flash the rom and gapps with cwm (wipe cache, dalvik, factory reset) but then I flash the rom with twrp (wipe data, cache etc) again.
i dont know if I wipe some important data
formerly I installed some stock base roms via cwm, and I didnt wipe anything extra this time
I backuped TA partition before unlock bootloader. Is wifi work if I relock bootloader and flash stock rom & kernel
Click to expand...
Click to collapse
Seems like some kernel modules are missing.
This is a sure method-procedure that I follow for flashing a new ROM on my and on my friends' XP.
1)flash stock JB firmware(ftf) using flashtool.
2)flash boot.img from the ROM you want to flash, using flashtool.
3)reboot in twrp using power button during boot up.
4)wipe data, cache, dalvik.
5)flash ROM + gapps and reboot.
hliasant said:
Seems like some kernel modules are missing.
This is a sure method-procedure that I follow for flashing a new ROM on my and on my friends' XP.
1)flash stock JB firmware(ftf) using flashtool.
2)flash boot.img from the ROM you want to flash, using flashtool.
3)reboot in twrp using power button during boot up.
4)wipe data, cache, dalvik.
5)flash ROM + gapps and reboot.
Click to expand...
Click to collapse
thanks for help :good:
I install slimkat 8.8 and wifi works fine atm :laugh: