HI .. I TRY TO INSTALL MIUI ..
1) flash by odin xxkk5
2) flash cf root
3) poot to sdcard the miui zip file
4) i do full wipe and install the zip
when my SGS2 turn on he stuck and do reboot , stuck and do reboot ..
Problem !.
Try flashing the rom a second time.
Sent from my GT-I9100 using Tapatalk
Have you done this prior to installation?
Wipe Data
Wipe Cache
Wipe System
Wipe Dalvik Cache
then install ROM...twice if first failed.
If there's still a problem, redownload the ROM.
Flashing stock Samsung ROM is still flashing a different ROM, you're not going back to the real stock as you are still running a ROM, in this case Samsung's ROM.
View attachment SuperWipe_SGS2.zip
flash that in recovery first to wipe eveything then flash the rom and wipe dalvik then reboot and let it sit for 5 - 10 min then reboot again
Related
i have been trying to flash a custom rom for quite some time now
i flash a standard rom from samfirmware everything works fine
then i root the phone foe clockwork recovery and super user
now no matter what rom i install all it does is reboot its self over and over
ive tried clearing catche and divlek and factory reset befor and after update but no joy please help me
JohnyBoy2o11 said:
i have been trying to flash a custom rom for quite some time now
i flash a standard rom from samfirmware everything works fine
then i root the phone foe clockwork recovery and super user
now no matter what rom i install all it does is reboot its self over and over
ive tried clearing catche and divlek and factory reset befor and after update but no joy please help me
Click to expand...
Click to collapse
What standard ROM did you use? Did you do a wipe after you installed Clockwork?
JohnyBoy2o11 said:
i have been trying to flash a custom rom for quite some time now
i flash a standard rom from samfirmware everything works fine
then i root the phone foe clockwork recovery and super user
now no matter what rom i install all it does is reboot its self over and over
ive tried clearing catche and divlek and factory reset befor and after update but no joy please help me
Click to expand...
Click to collapse
General steps before flashing a new ROM.
1. Backup your present ROM just incase
1. Wipe data/ factory reset
2. Wipe cache partition
3. Wipe dalvik cache (under advanced)
4. Format /system (under mount)
5. Flash your desired Rom/zips
6. Fix permissions (under advanced)
Notes:
- If you are moving from from an AOSP ROM to Samsung (vice versa), perform all the steps above.
- If you are upgrading / downgrading from one android version to another e.g ICS to jellybean or 4.0.3 to 4.0.4, also perform all the steps above.
- If you are upgrading from a Samsung ROM to another wipe the same android version, you may skip step 1.
- if you are upgrading your Aosp/aokp Rom with another with the same android version e.g 4.0.4 Aosp to 4.0.4 aokp, you may also skip step 1.
*******Important******
If you are presently running a Samsung based 4.0.4 Rom that is using Samsung based kernel e.g CF-ROOT or stock kernel, please flash Siyah kernel before performing any of the above steps. You will end up with an unusable device if you don't adhere to this important information.
Swyped from my Samsung Galaxy SII
JohnyBoy2o11 said:
i have been trying to flash a custom rom for quite some time now
i flash a standard rom from samfirmware everything works fine
then i root the phone foe clockwork recovery and super user
now no matter what rom i install all it does is reboot its self over and over
ive tried clearing catche and divlek and factory reset befor and after update but no joy please help me
Click to expand...
Click to collapse
Based on the bold, you're in a bootloop. Try to wipe data/ factory reset, clear cache and dalvic in cwm recovery and it should work
Edit: and are you following the steps on the first post of the thread? The creator of the rom usually has step by step instructions on how to install the rom
Sent from my Nexus 7 using xda premium
darkside super wipe
can i just use darkside super wipe before installing a new rom is that good enough
I used to have the same problem too, the problem was with my kernel, if you can, go into download mode and flash stock ROM then root using siyah
Sent from my GT-I9100 using xda premium
hi i installed a rom ported from xperia s but nothing is working in it...i mean no menu options no settings or nothing....i donk know why..can anyone help me out with this..the installed rom link is down here..i even have the required kernel for that and even flashed that kernel before flashing the rom....
http://forum.xda-developers.com/showthread.php?t=1782771
Vasisht Reddy writes:
1) Flash rom-003 and launcher
2) Now reboot, let the rom settle and reboot to recovery
3) Now flash rom-005
4) now reboot, let the rom settle.
5) Again finally reboot to recovery and flash addon pack
Before you install the CWM you wipe data / factory reset wipe Dalvik cache.
Otherwise, follow the instructions.
I just rooted my phone yesterday and i tryed to flash a new rom but it keeps on showing the start up screen for all my roms i tried to flash plz help
what to do
Tuyeni-boy said:
I just rooted my phone yesterday and i tryed to flash a new rom but it keeps on showing the start up screen for all my roms i tried to flash plz help
what to do
Click to expand...
Click to collapse
Install via CWM. Instructions can be found in CWM and ur ROM thread.
Sent from my frozen Penguin's Nexus 7 with frozen CM 10.2 using frozen Tapatalk 4.FORGOTTEN Pro
Flash a custom rom with cwm..
wipe your data/system first.
wipe catche
install from sd card (Flashable file must be store in root of your sdcard.)
wipe catche
wipe dalvik catche
Imp:
Make your currunt working rom backup before anything you do with your phone. it will save you.
Tuyeni-boy said:
I just rooted my phone yesterday and i tryed to flash a new rom but it keeps on showing the start up screen for all my roms i tried to flash plz help
what to do
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1552792
go to this post and flash the stock firmware via odin.
for installing custom rom, you will need root and cwm
go to recovery mode
choose install zip from sd card
choose the cwm file
this will install the cwm.
now wipe data and cache
go to advanced menu and wipe dalvik cache
then go to choose zip from sdcaed and select the rom
please make sure that you are using a proper custom rom file meant for your phone.
hit thanks if it helped
I root my Phone With "CF-Auto-Root-m0-m0xx-gti9300"
I instal Recovery ( I try many recoverys CWM 5.xx 6.xx and TWRP ) All are working good
Everytime when I try to flash a custom rom with or without aroma all the proces are working good but when I rebot, the phone stay at samsung logo .(retry flash not help)
I can install just with Odin stock firmware.
In recovery i can instal diferent mods in stok firmware and that works good ,but when i try to instal a full rom ,custom rom ,after instal and rebut the phone stay at samsung logo
What i do wrong ? What can i do to be able to instal a custom rom ?
Please help
Go flash a full stock with closest android version to the custom u want to flash, then wipe data/factory reset, install cwm wipe data, cache and dalvik cache. Install custom rom then wipe cache and dalvik cache again. Reboot device and wait about 15 to 20 min. I takes some time for first boot. Gd luck
Sent from my HTC One X using xda app-developers app
Use philz recovery version 5.15, use the wipe for new rom installation before you flash, also format internal sd if going to 4.3.
convict_moody said:
Go flash a full stock with closest android version to the custom u want to flash, then wipe data/factory reset, install cwm wipe data, cache and dalvik cache. Install custom rom then wipe cache and dalvik cache again. Reboot device and wait about 15 to 20 min. I takes some time for first boot. Gd luck
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Thanks for reply
I do what you said but i don't wait 15 - 20 min . I wait about 5 -10 minutes and i removed the battery
Recap . I understand that I should wait 20 minutes with the phone showing samsung logo ? Nothing else . Isn't it ?
boomboomer said:
Use philz recovery version 5.15, use the wipe for new rom installation before you flash, also format internal sd if going to 4.3.
Click to expand...
Click to collapse
Thanks for the reply
I use " philz_touch_5.18.5-i9300.tar "
The version 5.15 is better ?
mihaitosca said:
Thanks for the reply
I use " philz_touch_5.18.5-i9300.tar "
The version 5.15 is better ?
Click to expand...
Click to collapse
Yes, 5.18 doesn't flash properly for some reason.
Hi. this is Andy. may i have yous help for ROM flashing?
i try to flash my rom yesterday but not success. i updated the recovery with CMW and saved the rom (zip) in sdcard. and i process the flashing. cause error and couldn't go ahead and abort the process automaticall. i try another rom but got the same result.
finally i can't turn on my phone. just stay on samsung logo screen. i used with odin and flash a mds5 file for recover is fine. but i found that odin can't input a zip file. all are tar or mds5 file.
Am i have some step wrong or missed? did yours have a step by step and show me how to do??
may i have all yours help??
thanks in advance !!!!!!
Hi you,
I usually use these steps below to flash ROM
1. Use Odin to flash CWM that is compatible with your new ROM
2. Copy your new ROM into phone sdcard
3. Boot into CMW, wipe data/factory cache, wipe davik cache
4. Flash your new ROM and reboot.
Hope this help.
porcupinesoft said:
Hi you,
I usually use these steps below to flash ROM
1. Use Odin to flash CWM that is compatible with your new ROM
2. Copy your new ROM into phone sdcard
3. Boot into CMW, wipe data/factory cache, wipe davik cache
4. Flash your new ROM and reboot.
Hope this help.
Click to expand...
Click to collapse
Thanks in advance, i will try that and update you again. thank you very much.