I'm trying to install a KA07 Xperia SSpeed Rom.
But i stuck at boot animation.
What i did?
Unlocked the Bootloader.
Flashed Xperia S .76 FTF.(It is booting).
Then flashed the Advance stock kernel form DOOMLord.
Booted into .76 FW,its working.
Then Rebooted into recovery.
Wiped Dlavik Cache.
Wiped Factory Reset.
Installed KA07_Xperia_SSpeed.zip
But it stuck at boot animation.
Why?
hello (and sorry for my bad english)
try this (that's what i do and it's ok) :
-flash76 ftf with flashtool and reboot for a while (10mn, try if all is ok)
- flash 76 preroot with fastboot and reboot for a while...
- install doom kernel (v1a, wifi modules, etc...v4a...aroma..) and boot for a while
-boot in doom recovery for wipe dalvik cache and install ka07 with aroma...
-boot for a while, try the rom,
-boot in recovery and format cache, wipe dalvik
I have done this and , for my phone, all is ok...
I have read some people have installed first the ka6 then ka7...
I wish it can help you...
Related
I have unlocked my bootloader properly.I am on prerooted stock kernel and WB v4.I am trying to install WBv5 custom kernel on it.After flashing my phone doesnt boots up.It gets stuck on bootscreen.Can any one guide me to the correct method to get it work?
Thanks
Try install wb stock kernel version.
Its work great here.
Custom kernel in unlocked BL still have deepsleep issue, thats why i advice you to flash doom advance stock and wolf stock version.
Sent from my X10i using XDA App
I have a similar problem. I think my phone is incompatible with DoomKernel. What I did was flash a different custom kernel and so far it's working okay.
Hi guys, I advice to restart all in zero.
http://forum.xda-developers.com/showthread.php?t=936733
1. Flash 2.3.3 with flashtool 3.0.0
http://forum.xda-developers.com/showthread.php?t=920746
2. Flash with downgrade kernel and start you phone then root after reboot remove battery.
http://azuzu.spice.net.au/tools/X10_GB_Root/X10_aZuZu_Kernel_Downgrade_Generic.ftf
3. Flash with Upgrade kernel.
http://azuzu.spice.net.au/tools/X10_GB_Root/X10_aZuZu_Kernel_UpGrade_Generic.ftf
4. Install xrecovery 0.3 choose 0.3GB
5.Install WB 0.5, factory Reset (Full wipe), wipe Cache Partition, wipe Dalvik Cache, reboot
http://forum.xda-developers.com/showthread.php?t=1192988
6.Flash Doomkernel (choose overclocked or not. Warning : Overclocked drain a lot battery).
Flash via recovery wifi modules(If you change rom, you must to flash wifi module after install your rom)
http://forum.xda-developers.com/showthread.php?p=17526480#post17526480
Factory Reset (Full wipe), wipe Cache Partition, wipe Dalvik Cache and battery stats.
Asgarth974 said:
Hi guys, I advice to restart all in zero.
http://forum.xda-developers.com/showthread.php?t=936733
1. Flash 2.3.3 with flashtool 3.0.0
http://forum.xda-developers.com/showthread.php?t=920746
2. Flash with downgrade kernel and start you phone then root after reboot remove battery.
http://azuzu.spice.net.au/tools/X10_GB_Root/X10_aZuZu_Kernel_Downgrade_Generic.ftf
3. Flash with Upgrade kernel.
http://azuzu.spice.net.au/tools/X10_GB_Root/X10_aZuZu_Kernel_UpGrade_Generic.ftf
4. Install xrecovery 0.3 choose 0.3GB
5.Install WB 0.5, factory Reset (Full wipe), wipe Cache Partition, wipe Dalvik Cache, reboot
http://forum.xda-developers.com/showthread.php?t=1192988
6.Flash Doomkernel (choose overclocked or not. Warning : Overclocked drain a lot battery).
Flash via recovery wifi modules(If you change rom, you must to flash wifi module after install your rom)
http://forum.xda-developers.com/showthread.php?p=17526480#post17526480
Factory Reset (Full wipe), wipe Cache Partition, wipe Dalvik Cache and battery stats.
Click to expand...
Click to collapse
If you have an unlocked bootloader, then you don't need azuzu's rooting method, just simply flash the doom kernel v5 through flashtool then install your favourite custom rom.
Sent from my X10i using XDA App
Hi, I have problem with cm9, when I flash rom and grappe then flash boot.img. I starting phone I have logo free xperia logo then recovery then logo free xperia and nothing more. Please help me.
for first installation you must format system, data, Cache and then Remount the Partititions (in CWM under Mounts and storage)
if you are finish with instal CM9 you must remount the Partititions again and then Flash gapps
it will not work with the CM9 kernel, because the Recovery is a bit broken
my way was: flash any kernel with full working recovery (does not care witch one)
than format and install all things
and then reboot
its not needet to reflash the Kernal again because the kernel is in the CM9 Zipfile and will flash automaticly
I installed Shin Engine v3 and SE V5 but both dont worked. I followed that steps:
"Installation
Download Rom and copy to Sd card
Reboot into CWM Recovery
enter Mount and Storage -> /format system
Wipe data/factory reset -> Wipe cache partition enter Advance -> /wipe dalvik cache /wipe battery stats
Flash ROM = wait until finish
Reboot. Done". That you can get it here. "http://forum.xda-developers.com/showthread.php?t=1551522"
I unlock root and bootloader, installed nAa 11 Kernel.
Then after I install the rom I reboot and then the cellphone keep rebooting infinitely.
What can I do?
Flash Alfs v08a CM7 no FPS cap version(optional, but always working+better performance). I tried these ROMs and they worked. However, if you use an ICS ROM like ShinEngine V3(not BostonEngine v5), you MUST use nAa ICS kernel!! Otherwise it won't work for you. If you have the correct kernel, correct ROM and still not working, try reflashing the ROM and NOT wiping everything and vice versa.
Good luck!
hi i installed a rom ported from xperia s but nothing is working in it...i mean no menu options no settings or nothing....i donk know why..can anyone help me out with this..the installed rom link is down here..i even have the required kernel for that and even flashed that kernel before flashing the rom....
http://forum.xda-developers.com/showthread.php?t=1782771
Vasisht Reddy writes:
1) Flash rom-003 and launcher
2) Now reboot, let the rom settle and reboot to recovery
3) Now flash rom-005
4) now reboot, let the rom settle.
5) Again finally reboot to recovery and flash addon pack
Before you install the CWM you wipe data / factory reset wipe Dalvik cache.
Otherwise, follow the instructions.
Hello,
I have a locked BL with a stock .54 firmware (Xperia P), I rooted and flashed a rom recently which worked perfectly.
I just read that a FXP207 ROM was avalaible for locked BL, so I tried to install it: I did the following:
(This rom: http://forum.xda-developers.com/showthread.php?t=2130986)
Data/factory reset
Wipe cache & Dalvik
Flash the rom
Flas GAPPS
Data/Factory reset
Wipe Cache & Dalvik
Except now, the phone is stuck at the SONY logo, and if I press the volume UP + Start button (to reboot), i can't go to CWM to flash/Reflash something else.
Is there a way of doing anything ?
Regards,
FoX
PS: did not post that in the ROM topic because I don't have the reply right.
Edit1: Oh, I just noticed that I forgot to re-flash the stock .54FTF firmware... could that be the cause? Do I just have to wait for the phone to shutdown (I only know how to reboot it) and flash the firmware ?
Update1: Successfully (by keeping volume up + power) shut down the phone, flashed .54 firmware, no change.
Problem solved via flashing .54 properly.