dont know is there anyone over here got the sgs2 from telecom nz or not
using androidmeda latest rom atm, but when i tried *#1234#, the csc shows unknown.
used csc select and it said already at the tnz
tried to manually put the csc files under the system folder, but still doesnt help.
anyone got any ideas?
not big problem, other things are working funtional, just this one quite anoying ==
cant post in the developer forum yet
any idea would be appreciated.
Dude a similar thing happened to me over here.Its possible that you have a mono-csc package and not a multi one.I had a mono-csc firmware (XWKF3-FOP) for Spain cos i didnt need the multi csc pack and when i flashed a custom ROM i got the same message as you.Thinking it was a faulty ROM i downloaded Villain and tried that but got the same message but this time when i went in to change the csc,just to see what would happen,selected FOP and then install but all i got was a message saying that it wasnt available unless there was at least 3 csc to choose from.So it seems that custom ROMs are unable to recognize anything below 3 so comes up as unknown.
Related
I want to update to PKL which is available on Kies in Poland. The problem is, I can't update my Galaxy Ace through Kies. I got "This device cant be updated" error.
I've updated using Odin if thet matters.
yea i got this same problem...i was on VillainROMv1 then i flashed it back to XXKA6 2.2.1 stock PDA:KA9 PHONE:KA6 CSC:KA5 on Kies in Trinidad an it says "This version of the device cannot be updated." can anyone help
You have to flash a multi csc and pick your correct country code in the *272* code
Sent from my GT-S5830 using Tapatalk
Can I flash just csc or I need to flash full rom that has multi csc at samfirmware?
Also how do the *272* code works?
GT-S5830 Galaxy Ace - Tapatalk
I think the CSC only will work, but I am not sure, the *#272*IMEI# and you will be presented with a menu where you can choose the correct country code, but beware that this will restore your rom to factory settings
So, can I install PKL using Odin but just replace just CSC for MultiCSC from other FW for future use?
I dont think so since the multi csc is from froyo.
Is WKB7 a good choice?
What are you thinking about? your original question was how you could update via KIES, I gave you that answer and now you're wondering about arranging the pda/csc options yourself, either you want it on your correct country code or not
The only way do do that is either to have a multi CSC or FKP3 which is Poland's newest csc afaik
I mean: Is WKB7 and matching Multi-CSC combo good to change csc and update using KIES, but...
albertbm said:
[...] or FKP3 which is Poland's newest csc afaik
Click to expand...
Click to collapse
that will be my choice
i have samsung galaxy ace
i have a problem.
There is a windows 7 x64 home premium sp1 system on my desktop pc.
I'm tried a lot of times install my phone driver but it alvays unsucessfull.
I installed the latest kies,but when i plug my phone to pc,the kies can't install usb modem driver.
a tried uninstall with revo uninstaller,and reinstall,but that i still can't use my phone with my desktop pc.
but my phone works great with my laptop (winxp x86 sp3 professional)
i 'd like use my phone with my pc,but i can't..
please help
Uninstall KIES. This should uninstall drivers. Then on Win7x64 connected to the internet connect Galaxy Ace. It should automatically find drivers on Windows Update. This trick works for me.
Ok. I've installed PKL update with FKP3 CSC but I still got "device can't be updated". However, in *#272*IMEI# menu i have multiple CSCs. Which one is for Poland? Now selected is PRT. And there is no XEO on list.
Also swype its missing Polish language.
Edit:
Flashed WKB7 with Multi-CSC, changed code to XEO (Polish one) and "device can't be updated" again.
Is Odin my only way of updating my Galaxy Ace?
And I foud this: http://samsung-mobile.com.pl/forum/Thread-i5500-how-to-revert-back-to-original-firmware-updating-through-kies. But I don't know what to put into all these fields.
Edit 2:
Flashed KPK and everything works. Polish language in Swype and Kies updates BUT there is no Polish CSC in *#272*.
Flashed KPN - no Kies updates but has Polish CSC.
Hello, I recently un-rooted my S3 and set everything back to stock but I ran into a little issue with unknown CSC and FCing Messenger. After searching the forum, I did find couple downloadable CSC links but I wasn't able to find "PHE" Spain CSC. When I do type in *#272*IMEI# I do see the sale code PHE at the top and I have one selection BUT it's not even named... it's just blank selection as shown on attached screenshot. It seems easily fixed problem but I have no idea where to find this PHE CSC file.
How do I go about fixing this issue?? Please any advices would be greatly appreciated, Thank you.
I´ve just flashed i9300XXELLA and now I cannot make any calls or send text msgs. Whenever I try to make a call it tells me I´m not registered on a network. I went to "Mobile Networks", "Network Operators" and selected my carrier but I keep getting the same msg whenever I try to make a call. Everything else is workng perfectly.
Does anyone know which CSC I should be using in Brazil and how can I change mine?
Check your IMEI from the phone. Does it start with 00?
No, it doens´t start with 00. It starts with 35.
I´ve tried doing a *#272*imei# but nothing happened when I typed it into the phone dialer.
Can´t I just flash another CSC via Odin? If I can then how do I know which CSC to use?
I´ve found a CSC file for Vivo (my carrier) on this site http://androidfirmwares.net/PhoneCSC3 but I have no idea if I can simply install it and if it will be compatible with my current rom.
.
13/05/2012 ZVVALE6 ZVV VIVO Brazil Intratech
CSC is not needed have you actually entered the network settings .
CSC see the CSC thread in the stickys .
Basically use CSC that came with the phone carrier .
jje
Odd, I am in Australia and I flashed the Polish CSC to ensure I get updates on my S3 and I can make calls and everything... weird!
JJEgan said:
CSC is not needed have you actually entered the network settings .
CSC see the CSC thread in the stickys .
Basically use CSC that came with the phone carrier .
jje
Click to expand...
Click to collapse
Ok, what I want to know now is if I can simply flash the CSC files for my carrier on a different ROM.
Can I install this CSC (ZVVALE6 ZVV VIVO Brazil) on i9300XXELLA?
Any CSC on any firmware .
jje
so the imei matches the one on the box?
For anyone with the same problem, I´ve managed to fix the issue with this patch http://forum.xda-developers.com/showthread.php?t=1918601
my galaxy s2 is GT-I9100. i saw a jellybean update is on kies so i did the update. However after i did the 4.2.1 update, i found out my CSC was changed! before the jellybean update, it was TGY(HongKong) after the updates, it changed to XSP(Singapore)...WTF.............
Also i cannot change the CSC anymore. i tried using CSC select to change my CSC, but it says "com.android.Precnfig not found on your device. Manual mode..." not only in phone, Kies also says my device is unable to do S/W upgrade or something.
BTW i haven't done any rooting. i don't know why after i did the jellybean update, it shows these kinds of problems.
please give me some solution or any feedback!
re-flash.
Sent from the little guy
changing csc code in jellybean requires root access.
i rooted and tried csc select but there is no csc to select from.
anybody know why?
Did you solve this problem?
A few days ago I got my Samsung A21s (SM-A217M) and I wanted to test out different firmware regions (choose the one where I live) so I downloaded 3, one was from Brasil and the other 2 are from here (tripled checked the CSC) but when I try to flash the correct firmware from my region it passes but when the phone boots up it looks exactly the same from the brasilian firmware, same network providers, apps language, etc. I have even tried just flashing the CSC but nothing has worked at all. Is there something that im missing? Is there another method that will allow me to change to the correct firmware?