my galaxy s2 is GT-I9100. i saw a jellybean update is on kies so i did the update. However after i did the 4.2.1 update, i found out my CSC was changed! before the jellybean update, it was TGY(HongKong) after the updates, it changed to XSP(Singapore)...WTF.............
Also i cannot change the CSC anymore. i tried using CSC select to change my CSC, but it says "com.android.Precnfig not found on your device. Manual mode..." not only in phone, Kies also says my device is unable to do S/W upgrade or something.
BTW i haven't done any rooting. i don't know why after i did the jellybean update, it shows these kinds of problems.
please give me some solution or any feedback!
re-flash.
Sent from the little guy
changing csc code in jellybean requires root access.
i rooted and tried csc select but there is no csc to select from.
anybody know why?
Did you solve this problem?
Related
Sorry guys, I know this is a really stupid question, and I have tried searching around, but I don't seem to understand what the importance of the CSC is?
My phone was originally from O2 on PAYG, and recently I updated it to KE7 using odin since O2's firmware wasn't out. I didn't do anything to change the CSC, but the debranding guides seem to recommend this. Does not changing my CSC to the XEU or whatever have any effect?
Currently Kies says my phone's CSC is KD1 (O2U). I tried using the *#1234# method to find out my phone info, but nothing comes up in the stock dialer when I enter it. The numbers simply disappear and nothing happens. Is this by any chance connected to the fact that I'm on generic firmware but didn't change the CSC?
CSC has an influence on the phone's product code, it's like the version of your firmware. Your product code and CSC will change when you debrand it to a generic firmware or any other firmware for that matter. So your CSC is most likely to be changed already, if it hasn't then do a system reboot by going in to recovery mode.
Does it matter that I haven't changed my CSC to match my generic firmware? Are there any compatibility issues in this situation?
Sent from my GT-I9100 using XDA Premium App
CSC says in effect UK phone use UK settings + list of UK network providers settings .
There are no compatibility issues if it finds your network .
If it works leave it as it is .
jje
I want to update to PKL which is available on Kies in Poland. The problem is, I can't update my Galaxy Ace through Kies. I got "This device cant be updated" error.
I've updated using Odin if thet matters.
yea i got this same problem...i was on VillainROMv1 then i flashed it back to XXKA6 2.2.1 stock PDA:KA9 PHONE:KA6 CSC:KA5 on Kies in Trinidad an it says "This version of the device cannot be updated." can anyone help
You have to flash a multi csc and pick your correct country code in the *272* code
Sent from my GT-S5830 using Tapatalk
Can I flash just csc or I need to flash full rom that has multi csc at samfirmware?
Also how do the *272* code works?
GT-S5830 Galaxy Ace - Tapatalk
I think the CSC only will work, but I am not sure, the *#272*IMEI# and you will be presented with a menu where you can choose the correct country code, but beware that this will restore your rom to factory settings
So, can I install PKL using Odin but just replace just CSC for MultiCSC from other FW for future use?
I dont think so since the multi csc is from froyo.
Is WKB7 a good choice?
What are you thinking about? your original question was how you could update via KIES, I gave you that answer and now you're wondering about arranging the pda/csc options yourself, either you want it on your correct country code or not
The only way do do that is either to have a multi CSC or FKP3 which is Poland's newest csc afaik
I mean: Is WKB7 and matching Multi-CSC combo good to change csc and update using KIES, but...
albertbm said:
[...] or FKP3 which is Poland's newest csc afaik
Click to expand...
Click to collapse
that will be my choice
i have samsung galaxy ace
i have a problem.
There is a windows 7 x64 home premium sp1 system on my desktop pc.
I'm tried a lot of times install my phone driver but it alvays unsucessfull.
I installed the latest kies,but when i plug my phone to pc,the kies can't install usb modem driver.
a tried uninstall with revo uninstaller,and reinstall,but that i still can't use my phone with my desktop pc.
but my phone works great with my laptop (winxp x86 sp3 professional)
i 'd like use my phone with my pc,but i can't..
please help
Uninstall KIES. This should uninstall drivers. Then on Win7x64 connected to the internet connect Galaxy Ace. It should automatically find drivers on Windows Update. This trick works for me.
Ok. I've installed PKL update with FKP3 CSC but I still got "device can't be updated". However, in *#272*IMEI# menu i have multiple CSCs. Which one is for Poland? Now selected is PRT. And there is no XEO on list.
Also swype its missing Polish language.
Edit:
Flashed WKB7 with Multi-CSC, changed code to XEO (Polish one) and "device can't be updated" again.
Is Odin my only way of updating my Galaxy Ace?
And I foud this: http://samsung-mobile.com.pl/forum/Thread-i5500-how-to-revert-back-to-original-firmware-updating-through-kies. But I don't know what to put into all these fields.
Edit 2:
Flashed KPK and everything works. Polish language in Swype and Kies updates BUT there is no Polish CSC in *#272*.
Flashed KPN - no Kies updates but has Polish CSC.
dont know is there anyone over here got the sgs2 from telecom nz or not
using androidmeda latest rom atm, but when i tried *#1234#, the csc shows unknown.
used csc select and it said already at the tnz
tried to manually put the csc files under the system folder, but still doesnt help.
anyone got any ideas?
not big problem, other things are working funtional, just this one quite anoying ==
cant post in the developer forum yet
any idea would be appreciated.
Dude a similar thing happened to me over here.Its possible that you have a mono-csc package and not a multi one.I had a mono-csc firmware (XWKF3-FOP) for Spain cos i didnt need the multi csc pack and when i flashed a custom ROM i got the same message as you.Thinking it was a faulty ROM i downloaded Villain and tried that but got the same message but this time when i went in to change the csc,just to see what would happen,selected FOP and then install but all i got was a message saying that it wasnt available unless there was at least 3 csc to choose from.So it seems that custom ROMs are unable to recognize anything below 3 so comes up as unknown.
Hi
I posted this problem in another thread, but most likely it wasn't the best place to do so. Hopefully posting it here, someone might have a better perspective and might have an answer...
I've read through the various posts in the forum, but I cannot seem to get a complete / definitve answer to my problem.
Phone: Galaxy S3
Original Firmware: Stock Vodafone Ireland (can't remember the exact version, but can trace it if required).
Phone originally was network locked, but unlocked with official key from Vodafone (no voodoo etc).
Description:
Downloaded Stock XXBLG8 from this forum.
Used a Win 7x32 with no Kies installed and with ODIN 3.04 flashed the phone.
No problems detected during flashing. When completed, did *#1234#
Found that phone had been updated correctly to AP:I9300XXBLG8.
Changed CSC to BTU.
Checked phone in download mode and firmware listed as "Official Samsung", no yellow triangle.
Checked in Kies and found that phone was upgradeable via Kies (got LH1 update via Kies).
Problem:
Since update, have a problem accessing MMI codes. The basic ones like *#06# or *#0000# and similar, work fine. Others (more complex) for example *#7465625#, do not work. Typing them produces an error "Connection error or invalid MMI code". I know these particular codes worked before flashing to XXBLG8.
Apart from this, the phone seems to be working perfectly well.
Is there a solution to this problem?
Any help gratefully accepted.
Having the same problem myself. I was Voodoo unlocked and got the unlock code from Vodafone IRE today but it won't work. Keep getting the same errors as you.
I was on stock XXBLG8 too, tried it with the original Vodafone firmware but still had problems. Would be interested if anyone had any more info about this.
They've probably been disabled by samsung. But they do work again on the latest JB leak.
Sent from my GT I9300 using buttery Jelly Beanz
hello everyone , i'm new in this forum and i will appreciate any help from your part to help solve my problem
i have samsung galaxy s3 canadian version unlocked sgh-i747m , i'm using it in Algeria in my local network , i was using android 4.1.2 and everything were fine until i updated the firmware via kies to 4.3 everything work fine except some ussd codes like when i try to view my balance i dial *200# and i got the message " connection problem or wrong mmi code " i tried to put comma after # but doesn't solve the problem , i tried to downgrade to 4.1.2 but impossible as well ,
i found a way that may be the solution which is changing the CSC of the phone but all the application available need root access and i couldn't root the device via odin and autoroot file provided in the net it say pass at the end of the root process but supersu won't install and when i check with root checker it says the device is not rooted , i download root explorer but it's a bit complicated for me to use it , so any idea how to solve the problem
yacbob said:
hello everyone , i'm new in this forum and i will appreciate any help from your part to help solve my problem
i have samsung galaxy s3 canadian version unlocked sgh-i747m , i'm using it in Algeria in my local network , i was using android 4.1.2 and everything were fine until i updated the firmware via kies to 4.3 everything work fine except some ussd codes like when i try to view my balance i dial *200# and i got the message " connection problem or wrong mmi code " i tried to put comma after # but doesn't solve the problem , i tried to downgrade to 4.1.2 but impossible as well ,
i found a way that may be the solution which is changing the CSC of the phone but all the application available need root access and i couldn't root the device via odin and autoroot file provided in the net it say pass at the end of the root process but supersu won't install and when i check with root checker it says the device is not rooted , i download root explorer but it's a bit complicated for me to use it , so any idea how to solve the problem
Click to expand...
Click to collapse
try doing this:
http://www.androible.com/downgrade-galaxy-s3-i9300-official-4-1-2-jelly-bean-firmware/
But substitute the firmware used in this guide with yours. Enjoy