I discovered through Kies (which I only run every couple months ) that there is an update to my phone's firmware. Currently I'm using a rooted phone with the following version:
Android version: 2.3.3
Baseband version: I9100XXKE7
Kernal version: 2.6.35.7-I9100XWKF3-CL276555
Before I do the update, I'd like to make sure I can root it. Here's the info about the update from Kies:
KI4 - PDA
KI1 - Phone
KE1 (SMO) - CSC
Can someone point me to the necessary files to root the phone after the update? AND can you clearly tell me which of the various files I'll need (I'm pretty slow with this tech stuff).
Thanks in advance.
-Bob-
Related
Hi,
I have the Samsung Galaxy Europa (GT-I5500) and I'm trying to update my phone to 2.2 (Froyo) through Kies and It says that this version of the device cannot be updated.
Current firmware version:
PDA:JJ6 / PHONE:JG3 / CSC:JJ2 (XEU)
On about phone:
2.1-update1
Baseband Version:
I5500XWJG3
Kernel Version:
2.6.29-perf
[email protected]#1
Build Number:
ERE27.XWJJ6
None of this flashing lark though as I haven't a clue how to do it and I would need very very specific step by step instructions etc and I really want the Legitimate 2.2 firmware.
Please help as I really want to update my phone to 2.2.
Any thoughts?
Cheers
Andrewsean85
Doesn't matter, my father used Odin to update my phone to 2.2.
No one is going to help you here, I was in a similar situation, you have to download the firmware 2.2(Froyo) that belongs to your Product code and flash it with Odin to get rid of that Kies error. Just look in the stickies.
Regards
odin is the best way just f**k of the kies it just gave me the same error but i used odin for updating
ya same here just let kies jump. use odin
Andrewsean85 said:
Hi,
I have the Samsung Galaxy Europa (GT-I5500) and I'm trying to update my phone to 2.2 (Froyo) through Kies and It says that this version of the device cannot be updated.
Current firmware version:
PDA:JJ6 / PHONE:JG3 / CSC:JJ2 (XEU)
On about phone:
2.1-update1
Baseband Version:
I5500XWJG3
Kernel Version:
2.6.29-perf
[email protected]#1
Build Number:
ERE27.XWJJ6
None of this flashing lark though as I haven't a clue how to do it and I would need very very specific step by step instructions etc and I really want the Legitimate 2.2 firmware.
Please help as I really want to update my phone to 2.2.
Any thoughts?
Cheers
Andrewsean85
Click to expand...
Click to collapse
flashing is simple, type into youtube 'i5500 2.2 tutorial' and have a look at that video, shows a step by step way to flash, and has all the files you need.
Hello fellow XDA-members,
I currently have an S2 with the following system information:
Android: 2.3.3
Baseband: I9100XXKE4
Kernel: 2.6.35.7-I9100XWKE7-CL215725
GINGERBREAD.XWKE7
Updating through Kies won't work, as it said it did not recognise blabla (possibly due root and changed kernel).
I would like to update to the next official rom, with 2.3.5 (or 6, I'm not sure what the latest version was). I'm kind a lost in the maze of all the ROMS and stuff, so could anyone point me to the right next official ROM that I could flash & be up to date to the latest stable android?
Regards,
Paul
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
Choose the one you want for your country /location 2.3.5 or 2.3.6 .
jje
So for example, I could take the following one, then pick the XEN (Ntherlands) download (I live in Holland, T-Mobile). Do you also need to pick the kernel, or only flash this XEN one?
XWKK2
Firmware info
PDA:XWKK2
PHONE: XXKI4
Date: 11/11/2011
Android 2.3.6
XEN (Netherlands): http://www.multiupload.com/PBBE9HBXTS
XSA (Australia): http://www.multiupload.com/DRS2VVATBP
XWKK2 Stock Kernel: http://www.multiupload.com/7PRSFYHUWL
Password: [email protected]
Stock rom do not need another kernel .
XEN for your location .
jje
I meant, I currently have the "Kernel: 2.6.35.7-I9100XWKE7-CL215725", some time ago I flashed it to that kernel and applied root. I just only need to download the XEN version ROM, and just flash it, I do not need to download that specific kernel too and flash that before. (So in summary, just flash the rom, not needed to change the kernel I already had).
Thanks
Kernel is part of the firmware package not a separate item .
Kernels posted are not part of the update you flash firmware xxx and you have CSC OS APPS MODEM and KERNEL updated .
You will need to reroot use same kernel number as the one you flash .
jje
Hi all,
I have bought a second hand Samsung Galaxy S 2 in China.
The Android version installed is 2.3.3; I tried to do an update via Kies but I got the infamous message that "firmware update is not supported" for my device. I understand from other posts in the forum that maybe the firmware installed is not matching with the original region of the device, in this case I should install the right firmware in order to get the support from Kies, am I right?
But my question is...how do I know the original firmware/region for my model?
The data of the device are the following:
Model Number: GT-I9100
Android Version: 2.3.3
Baseband version: I9100XXKE4
Kernel version: 2.6.35.7-I9100XWKE7-CL215725 [email protected] #2 (does this mean the phone has been rooted?)
Build Number: QUENS.GINGERBREAD.XWKE7
Plus, when I connect to Kies the current firmware version detected is:
I9100XWKE7/I9100XEUKD1/I9100XXKE4/I9100XWKE7 (DBT)
Sorry for the noob question, I tried to figure out from the sticky post and used search but I am still confused...(yes, I got intimidated by the welcoming video of the forum)
Thanks
shandess said:
Hi all,
I have bought a second hand Samsung Galaxy S 2 in China.
The Android version installed is 2.3.3; I tried to do an update via Kies but I got the infamous message that "firmware update is not supported" for my device. I understand from other posts in the forum that maybe the firmware installed is not matching with the original region of the device, in this case I should install the right firmware in order to get the support from Kies, am I right?
But my question is...how do I know the original firmware/region for my model?
Its not posible to know without evidence guess maybe.
The data of the device are the following:
Model Number: GT-I9100
Android Version: 2.3.3
Baseband version: I9100XXKE4
Kernel version: 2.6.35.7-I9100XWKE7-CL215725 [email protected] #2 (does this mean the phone has been rooted?)
NO its the signature
Build Number: QUENS.GINGERBREAD.XWKE7
That reads as a custom rom by Quens ???
Plus, when I connect to Kies the current firmware version detected is:
I9100XWKE7/I9100XEUKD1/I9100XXKE4/I9100XWKE7 (DBT)
If its a i9100 and no other version pick a stock rom from the stock roms posts .
With later firmware and to match region phone is used in .
jje
Click to expand...
Click to collapse
Hey
I am from India and i have an SGS2 I9100 with the following details
PDA: I9100XWKF3
PHONE:I9100DDKE4
csc:I9100ODDKF3
BUILD NUMBER: GINGERBREAD.XWKF3
BASEBAND VERSION: I9100DDKE4
KERNEL VERSION: 2.6.35.7-I9100XWKF3-CL276555 [email protected]#2
The problem is that with ICS available in India i am still unable to update my phone. No wifi. So trying by 3G connection on my network provider.
But still it says no update found.
My phone has Gingerbread 2.3.3 and in the update software section i have 2 options:-
1. Software Update
2. Resume Update
What is it that i can do to update my phone to ICS???
rohitbodhe23 said:
Hey
What is it that i can do to update my phone to ICS???
Click to expand...
Click to collapse
Have a look at this thread, they are all stok roms you need to download Odin and find the rom that fits with your country http://forum.xda-developers.com/showthread.php?t=1075278 try the 3rd post for 4.0.3 roms download the correct one and flash via Odin. After flash do a factory reset to clear out any old 2.3.3 stuff. Remember to backup your apps contacts etc first.
XWLPF appears to be the most recent one for you just confirm you are using a Samsung i9100 and not i9100g.
Hi,
I am fairly new to smart phone development so please go easy on me this time
First, some info on my environment:
MacBook Pro
Mac OS X 10.7.5
Samsung GT-I9100
No SIM card installed yet
Samsung Kies 2.0.0.12095_7
Model Number: GT-I9100
Adroid Version: 4.0.3
Baseband Version: I9100UHLPE
Kernel Version: 3.0.15-I9100UHLPE-CL200654 [email protected] #3
Build Number: IML74K.UHLPE
Location: Eastern Standard Time, USA
So, my Samsung i9100 arrived this week from NewEgg.com. I was surprised it came installed with Adroid Version 4.0.3. Then I read that Samsung recently released 4.0.4 so I installed Kies, hoping to upgrade to 4.0.4.
In Kies, under Firmware Information, I see the following:
This is the latest firmware.
Current firmware version: PDA:LPE / PHONE:LPE / CSC:LPE(TTT)
Latest firmware version: PDA:LPE / PHONE:LPE / CSC:LPE(TTT)
I read that the firmware version can also be obtained by opening the dial pad and typing *#1234# So I did that and found this:
PDA: I9100UHLPE
PHONE: I9100UHLPE
CSC: I9100UUBLPE
Build Info: Fri Mar 9 13:49:34 KST 2012
Now I am confused:
1.) Did my phone arrive from NewEgg with an official Samsung Android version?
2.) Why is Kies not displaying the firmware version and how can I fix it?
3.) Assuming I get Kies fixed, lets say I want to wipe my phone, start from scratch, and install the official Samsung version of 4.0.4 Is that possible and how?
4.) Any other recommendations?
Thanks for your help!