Hallo everyone,
on Friday I bought a new Folio 100. Unfortunately it seems that the Wi-Fi doesn't work: the tablet connects itself only after I turn off and on my wireless routing.
If I disconnect the tablet (or the connection is lost) and then I try to connect it again, I have no chances The Wi-Fi connection cannot be established. Same if I turn on the Folio and try to connect it without a previous off-on of the router.
I have a WEP 64 Bit encryption. I tried to change it to WPA-TSK but the problem remain the same. I tried to connect to my Galaxy S using WPS2-PSK no way. The folio connects itself only after a restart of the router or with not protected nets.
I tried to install the Dexter mod 1.3a, with no results. Now I have the original FW 2.2.5.0053 back on (and the problem remains).
There is something I do wrong or I can still try or the tablet is definitely defective?
Please help me!
Thanks a lot in advance!!
Paolo
I had a similar problem: my WiFi network was seen as out of range by the tablet WiFi manager. And whenever I put the Folio in sleep mode, it lost the connection.
So, I changed the WiFi policy (in WiFi advanced settings: press menu button when on the WiFi configuration page, and choose advanced settings) to never turn off.
The tablet still has some difficulties to catch the network at startup (usually, I have to wait like 2 minutes), but now it keeps it.
Hope it helps...
Hello SinDeus,
thanks a lot for your advice, I've already tried this setting, but in my bedroom I've a bad signal and from time to time the connection get lost... and you can understand that it is really annoying to stand uphalf asleep to reset the modem. )
Anyway for the moment I've solved the problem exchanging my Belkin modem with a Zyxel of a friend of mine. The connection process is still quite slow, but at least it works without requiring a router restart.
Bye Paolo.
mine still not working...keeps on connecting/disconnecting......giving up soon...btw am using foliomod 1.3...even before when am using the stock rom..its so freaking hard to connect to my belkin router...only a few times tht i successfully get connected...help please!!!!
Hallo Neworder,
I had to exchange my router, the only way I was able to conect with belkin was restarting it.
I've also tried with static IP adress and changing the encoding type (WEP, WAP-TSK etc.) but the results was always the same. Even with the new modem the process isn't that smooth!
Quite annoying.
Sorry that I can't help you further.
the thing is if am connecting the folio to wifi connections in cafes/shops/eateries,no problem...fast and painless.
time to change modem router?
btw pademat which model of belkin u r using?am using a belkin 54g.
and ur new modem?zyxel which model?
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
shantanu_d said:
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
Click to expand...
Click to collapse
In my case the problem was with frozen "WiFi sharing" in combination with juicy defenders "Location" fearure. It seems such combination is dangerous. Solutin (in my case):
1. defroze
2. remove all wifi networks
3. reboot (for "clean" frozing)
4. make WiFi sharing frozen
5. reboot again just for fun
Try to check your router's MAC address restrictions. In my router, as security, I have to add MAC addresses of each device to share internet. They take IP's, connects etc. but does not have accesses to internet
as above, check that there is no MAC filtering set up.
one other thing it may be is the security settings, if you have a WEP Key to access the router it may need the Hex conversion of your key depending on what level of security you have (64bit or 128bit for example)
shantanu_d said:
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
Click to expand...
Click to collapse
Try setting up a static IP address for your phone, I presume your network is a 192.168.1.0, go into router settings and LAN setup, give your phone the address in a static DHCP assignment of 192.168.1.5, or any other address in the same subnet your in. Some SGSII's have problems with dynamic DHCP for some reason, some NS had the same problem too,
Sent from my Sammy Galactic S2 Beastly Device
I have a similar problem and I fix mine temporarily by turning my wifi off, then in wifi settings > advanced, I change wifi sleep policy from 'never' to 'only when the screen is off'. However I have to do this every time I want to use wifi so it can become quite annoying sometimes.
So I can get through however only for a short period of time as it seems as long my Galaxy S2 keeps turning off my wifi even though it's on :/
I had exactly the same issue on Linksys E4200 with my laptop, could connect to network, even to router's attached storage, but not to internet. Restart helped
On SGS2, I couldn't connect to the router at all at first, but fixed this by switching from WPA2/WPA mixed mode access protocol to WPA2 private. But I guess this is not exactly your issue.
SiSL said:
Try to check your router's MAC address restrictions. In my router, as security, I have to add MAC addresses of each device to share internet. They take IP's, connects etc. but does not have accesses to internet
Click to expand...
Click to collapse
Thanks for the suggestion but MAC restriction is already disabled at router
Robsso said:
I had exactly the same issue on Linksys E4200 with my laptop, could connect to network, even to router's attached storage, but not to internet. Restart helped
On SGS2, I couldn't connect to the router at all at first, but fixed this by switching from WPA2/WPA mixed mode access protocol to WPA2 private. But I guess this is not exactly your issue.
Click to expand...
Click to collapse
Yes, you are right this is not an issue for me.
In fact my SG2 being assigned with an IP address from 192.168.1.xx subnet.
Also at a same time my laptop connected with an IP from same subnet able to ping SG2.
OccasionalDroid said:
Try setting up a static IP address for your phone, I presume your network is a 192.168.1.0, go into router settings and LAN setup, give your phone the address in a static DHCP assignment of 192.168.1.5, or any other address in the same subnet your in. Some SGSII's have problems with dynamic DHCP for some reason, some NS had the same problem too,
Sent from my Sammy Galactic S2 Beastly Device
Click to expand...
Click to collapse
My SG2 being assigned with an IP address from 192.168.1.xx subnet.
So I think IP addressing may not be an issue.
Also another thing I tried was, at a same time my laptop connected with an IP from same subnet able to ping SG2.
So wi-fi router may not be an issue here, whats say ???
Even I am facing the same issue at my office network. I am able to connect to the wireless network but if I try to access any app I cannot browse. This is really frustrating looks like some issue with the modem drivers.
I was able to browse on another wifi created virtually by mobile tethering. This looks like a major bug with the current firmware. Another interesting thing to note is that the Wifi network has a hidden SSID and uses WPA2 auth scheme.
I have seen a Galaxy S able to connect to the same n/w without any issues.
Has anyone figured out a solution to this one ?
Hi, thanks for your reply.
I am yet to figure out a solution for this
Even I am also agree on the probable issue with modem driver.
I've D-link modem.
Are you aware of anything about this modem that can be reconfigured to get this worked ... ?? pl let me know
The wifi router at my office is Cisco Aironet 1200 Series, anyone else facing this issue ?
I'm having the same problem at work connecting my SGS2 with v2.3.3 Official Firmware (customized for Orange service provider) to a Cisco Aironet 1130 AP. I can see that the Galaxy authenticates with the AP correctly and gets IP from the DHCP server, but it cannot send or receive any traffic, although the phone stays connected and authenticated. At home, I use an Atheros based Fonera with DD-WRT without any problem.
As I'm the company's network administrator, I will try to further investigate this problem, but it seems like some kind of incompatibility between the devices or misconfiguration ....
Basuk said:
The wifi router at my office is Cisco Aironet 1200 Series, anyone else facing this issue ?
Click to expand...
Click to collapse
try turn off the wifi, turn off the mobile data and turn on the wifi again
It seems the SGS2 sometimes has problems with DNS.
Try a static IP and use 8.8.8.8 as second DNS server, which is a free Google DNS server.
This fixed MY problems
I rooted my SGS2 and voila wifi worked at my office finally I have been able to find a solution.. love my SGS2 the Beast...
I'm having this same problem..
I think I've tried all the solutions above, but one (Sorry - noob question):
Rooted?
is there a firmware patch or something that I should know about?
Anyone got any other ideas?
ETA:
I can connect to hotspots (DHCP) and at home (Have to set it to static tho)
No internet
AP works - Laptop and i8910 (had to set static and advanced settigs etc). I've rebooted it a few times, set DHCP on and off. DHCP seems to be running on the router
viqles said:
I'm having this same problem..
I think I've tried all the solutions above, but one (Sorry - noob question):
Rooted?
is there a firmware patch or something that I should know about?
Anyone got any other ideas?
Click to expand...
Click to collapse
This is an issue with SGS2 with wifi server using authentication protocol TPIK, if you use AES as encryption then it will work without any issues.
That should be a setting in my AP? I can't see it...
If I get a new non-crappy AP is that likely to solve my problem?
ETA:
Ah - that's a WPA thing? Mine only seems to do WEP - is that right?
Hi
I just got my SGS2 today and tested it with a friend. He had wireless and everything was working over there. When I came home, I couldn't connect to my wifi. I always get 'obtaining ip address'...
I've been searching whole night and I haven't been able to solve the problem.
I can connect to my wifi when I enable the dhcp server, but then I can't access the internet anymore.
Network setup:
Modem -> Switch -> Wireless Switch
I get my ip address directly from my provider (Telenet - Belgium). I've no router at home and it works with every device, except for the GS2S.
Someone experience with this? Is there another way then to buy a new router?
Thanks in advance
BulletTime
Well, the title says pretty much all .. I earlier didn't have this problem.. Then since last night, I came back home and connected my Galaxy Ace to my home wifi, but this time, it wasn't transferring any data.. It would be connected, full signal, but no internet connection.. My browser, gmail, YouTube, PlayStore, nothing would load.. It'd keep saying Connection Error. Retry.
My wifi works properly on the computer and other devices, and my phone used to work perfectly too! Why's it suddenly giving this problem?!
Any solutions!?
SOLVED!
Okay so I figured it out on my own!!
I went to Wifi Settings>> Advanced>> and "Use Static IP"
I then provided my phone with an IP address, gave the DNS servers as mentioned by my Router, and gateway, is ofcourse, the IP adress of the router. NETMASK is Subnet mask ..
Once I filled in them correctly, and as per my router settings, my mobile is now transferring data and I can now access the internet!
Just thought I'd post a reply incase anyone else was facing this problem
No data through laptop hotspot.
I have a similar problem, but with using my laptop as an access point. My Samsung Galaxy Ace had no problem connecting to either my or my wife's laptop access points initially till about a week ago. I use an HP while my wife uses a DELL. We both run Windows 7. But, here's when things started to get strange.
1. The Ace even though connected through my laptop's AP Wi-fi cannot send or receive data after the first few seconds.
2. My wife's Dell XCD35 (ZTE Blade) has no problems.
3. The Ace has no problem connecting to an Android AP or my wife's laptop AP.
I reflash and unrooted my phone and basically brought it back to factory settings but no luck.
Tried using other services for using my laptop as an accesspoint - mhotspot, virtual router and connectify - still no luck.
tried static ip - no luck.
reinstalled the MS Virtual Wi-fi Miniport Adaptop driver - no luck.
Somehow, there is a security setting on the laptop that's preventing my phone from connecting to the internet. I think I maybe connected to the network, but access to the internet is restricted.
There are no other features like MAC address binding or anything like for laptop APs.
It's getting really frustrating now.
Any help would be appreciated.
lobotomy said:
I have a similar problem, but with using my laptop as an access point. My Samsung Galaxy Ace had no problem connecting to either my or my wife's laptop access points initially till about a week ago. I use an HP while my wife uses a DELL. We both run Windows 7. But, here's when things started to get strange.
1. The Ace even though connected through my laptop's AP Wi-fi cannot send or receive data after the first few seconds.
2. My wife's Dell XCD35 (ZTE Blade) has no problems.
3. The Ace has no problem connecting to an Android AP or my wife's laptop AP.
I reflash and unrooted my phone and basically brought it back to factory settings but no luck.
Tried using other services for using my laptop as an accesspoint - mhotspot, virtual router and connectify - still no luck.
tried static ip - no luck.
reinstalled the MS Virtual Wi-fi Miniport Adaptop driver - no luck.
Somehow, there is a security setting on the laptop that's preventing my phone from connecting to the internet. I think I maybe connected to the network, but access to the internet is restricted.
There are no other features like MAC address binding or anything like for laptop APs.
It's getting really frustrating now.
Any help would be appreciated.
Click to expand...
Click to collapse
Set your Internet to "Allow other computers to share this Internet connection". Other ideas would be to check/disable your firewall
Wifi connected but not working
My Galaxy ace plus connects fine to wifi network but cannot browse internet or play store. I am using a free public wifi so i dont know about the static ip address. And this problem was from the starting whn i just bought it. So is there any other solution for this problem or not?
I tried everything... I restarted the modem- no luck. I filled in the blank from the advance wifi setting- no luck