Hey Everyone,
here is the new Ice cream sandwich keyboard
Features=>
1) very fast
2) no lags
3) new UI
4)better than gingerbread keyboard
5) Easy to type
6) it supports smileys
How to install?
note: its very easy to install
but it requires -
1) rooted phone
2) root explorer
Steps to install :
a) place file "latinIME_2.APK" in your sd card
b) open root explorer
C) Go to sdcard n find the place where u kept latinIME_2.apk in your sdcard
D) copy it to system>apps
E) set the permissions to rw-r--r-- by ticking the all three in "read" column and tick the first in the "write" column.
F) and then press ok and then reboot.
download => megaupload mediafire hotfile dropbox
Got screenshots?
BTW, 11.5MB for a keyboard....
11.5mb lol forget it then.
edit:
works sweet actually.
sent from my wilderbeast:buzz
Just saw my mistake, sorry guys!
3xeno said:
Got screenshots?
BTW, 11.5MB for a keyboard....
Click to expand...
Click to collapse
slymobi said:
11.5mb lol forget it then.
sent from my wilderbeast:buzz
Click to expand...
Click to collapse
LatinIME.apk file in cm7 is the same size.
check it in system/app/LatinIME.apk
phantom200580 said:
LatinIME.apk file in cm7 is the same size.
check it in system/app/LatinIME.apk
Click to expand...
Click to collapse
Never checked, I remove that and use the HTC keyboard, which is ~4MB.
Anyway, looks like the Enter key is back, which is a progressive step as far as I am concerned because I can't do without it, even is SMS'es.
EDIT: Or maybe not? That's the XDA App.
phantom200580 said:
LatinIME.apk file in cm7 is the same size.
check it in system/app/LatinIME.apk
Click to expand...
Click to collapse
so it is.......
better than ginger keyboard, but 11 mb is too big,
phantom200580 said:
Hey Everyone,
here is the new Ice cream sandwich keyboard
Features=>
1) very fast
2) no lags
3) new UI
4)better than gingerbread keyboard
5) Easy to type
6) it supports smileys
How to install?
note: its very easy to install
but it requires -
1) rooted phone
2) root explorer
Steps to install :
a) place file "latinIME_2.APK" in your sd card
b) open root explorer
C) Go to sdcard n find the place where u kept latinIME_2.apk in your sdcard
D) copy it to system>apps
E) set the permissions to rw-r--r-- by ticking the all three in "read" column and tick the first in the "write" column.
F) and then press ok and then reboot.
download => megaupload mediafire hotfile dropbox
Click to expand...
Click to collapse
Very nice, bigger than the cm7 keyboard, has better feeling to it also (for me at least). Overall 5/5 thanks
Btw for all who are whining, its the same size as original latinime.apk from cm7, just delete the old one and replace it :S
Sent from my HTC Wildfire using xda premium
Sorry to disturb you, but i have a question.
Is it possible to winzippah this keyboard to a 2.2.1 (jokerdroid) or 2.3.x (cyanogenmod 7.x) based rom, so i must not install it later?
(What I mean, install a new rom, and it is allready in it?)
If so, can i also winzip (winrar, 7-Zip) the keyboard language settings (german) to the rom?
Thanks, you are all awesome.
This is working great on my T-Mobile G2!!
Thanx!
jhbakerstreet said:
Sorry to disturb you, but i have a question.
Is it possible to winzippah this keyboard to a 2.2.1 (jokerdroid) or 2.3.x (cyanogenmod 7.x) based rom, so i must not install it later?
(What I mean, install a new rom, and it is allready in it?)
If so, can i also winzip (winrar, 7-Zip) the keyboard language settings (german) to the rom?
Thanks, you are all awesome.
Click to expand...
Click to collapse
Remove the existing LatinIME.apk from the ROM, rename this keyboard to LatinIME.apk, and, it should work (Don't unzip the ROM. Perform this with the "zipped" archive). Also, While I am not sure for the language settings, it should work, since the stock Gingerbread keyboard also includes all language settings.
3xeno said:
Remove the existing LatinIME.apk from the ROM, rename this keyboard to LatinIME.apk, and, it should work (Don't unzip the ROM. Perform this with the "zipped" archive). Also, While I am not sure for the language settings, it should work, since the stock Gingerbread keyboard also includes all language settings.
Click to expand...
Click to collapse
Thanks, that was a quick answer to a newbie.
Anyway to port this to stock 2.2.1?
I have no dev knowledge or pc to attempt to.... if its even possible
Sent from my HTC Wildfire using xda premium
still have a smiley button in the sms app.. am i doin it wrong?
DarkhShadow said:
Anyway to port this to stock 2.2.1?
I have no dev knowledge or pc to attempt to.... if its even possible
Sent from my HTC Wildfire using xda premium
Click to expand...
Click to collapse
Need s-off and using esfilemanager you then rename to LatinIME.apk and copy into system app to replace old version.that's how I did it. Not sure if it'll work on sense cos I'm on cm7.try it.
sent from my emmaroid infected wilderbeast
slymobi said:
sent from my emmaroid infected wilderbeast
Click to expand...
Click to collapse
My phones keyboard is named HTC_IME and no I couldnt get it to work, I think its gingerbread roms only
I'm sad now
Sent from my HTC Wildfire using xda premium
I'll need to try this out tonight. Any chance of an APK?
phantom200580 said:
How to install?
note: its very easy to install
but it requires -
1) rooted phone
2) root explorer
Steps to install :
a) place file "latinIME_2.APK" in your sd card
b) open root explorer
C) Go to sdcard n find the place where u kept latinIME_2.apk in your sdcard
D) copy it to system>apps
E) set the permissions to rw-r--r-- by ticking the all three in "read" column and tick the first in the "write" column.
F) and then press ok and then reboot.
Click to expand...
Click to collapse
Why would you need an .apk??
Sent from my HTC Wildfire using xda premium
Not working
Can move it in, but cannot install. anyone can help? Cm7.1.0.1
Related
I didn't see a thread on how to do this anywhere in the MT4G forum, so I thought I would share.
If you want swype, but are not on their beta test program, do not want to muck about with their "installer" app, or deal with the reminders of beta status and app expiration; you can pull swype from a stock ROM and use it on your device.
As per the rules, you should not do this on a phone that does not have swype installed stock.
Also, this involves messing around in the "system" partition. While the risk is very low, you do this at your own risk.
First you will need to extract the needed files from a stock ROM. If you are still running the stock software, you can use a file explorer app to make a copy onto your SD card. Just copy and paste. You can also pull the files from the stock image or from the Iced glacier ROM. Pulling from Iced Glacier is the easiest method. Just unzip the ROM file and find the needed files.
There are two files, both in the system partition. The first is "Swype.apk" and is in /system/app folder. The second is "libSwypeCore.so" and is in /system/lib/ folder.
Edit: 7/25/11
It seems you must also conciser the source ROM and destination ROM when obtaining the files. Swype does a device/licence check when running, and if it fails the check then Swype will not work. The build.prop lists "t-mobile/htc/ect" as product.brand and Swype seems to check this before running. So use a version of Swype from a ROM with the same build.prop or edit the build.prop manually.
Now to install Swype:
There are two ways to do this, ADB or root explorer. (or other file manager with RW)
Any extra info to help explain what is going on for any new guys will be in green text.
For ADB:
First put the files you extracted into the tools folder of the android SDK, then open an ADB shell to your phone. When that is done, use the following commands. (each line is a separate command)
Remember Linux commands are case sensitive.
First is to mount /system as RW. (this allows you to save files to /system)
Code:
mount -o remount,rw /dev/block/mtdblock4 /system
Then you need to push (save a copy) the files to the correct locations.
Code:
adb push Swype.apk /system/app/Swype.apk
adb push libSwypeCore.so /system/lib/libSwypeCore.so
It may give the files the wrong permissions. (how much access to the system they have) Just to be safe we need to give the files the right permissions.
Code:
chmod 644 /system/app/Swype.apk
chmod 644 /system/lib/libSwypeCore.so
sync
reboot
Your phone will reboot and then you are done.
For Root Explorer:
Extract a copy of the needed files and put them on the SD card.
Then open root explorer and open the "sdcard" folder.
Next find "Swype.apk" and long press it and select "copy" (or if you have already completed this step once, copy "libSwypeCore.so")
Use the back button to go back to the root of the folder tree (up top where it shows your current location, it will show "/" this is where you started from when opening the app)
Locate and open the "system" folder.
You then need to tap the button up top marked "Mount R/W" (this will allow you to make changes and copy the files to the right locations) (this step should not be needed if you have already done so before)
Next open the "app" folder. (or if you are moving "libSwypeCore.so" open the "lib" folder)
Hit the "paste" button to copy the file.
Next long press the file you just copied "Swype.apk" and select "permissions" (or "libSwypeCore.so" as appropriate)
You will see a bunch of check boxes. The will be labeled "read" "write" "execute" across the top and "user" "group" "others" down the left side.
For "user" select the "read" and "write" boxes
For "group" and "others" select the "read" box only. Then select "OK"
When done with the first file, repeat the above steps again with the second file. Observe any changes to the steps that are in orange text.
Next open up a "terminal emulator" app and then run the following commands.
Code:
su
sync
reboot
Your phone will reboot and then you are done.
Hope this helps someone.
When I pushed the files to CM7 I completely forgot about checking permissions when it didn't work.
I do however prefer the newest Swype from the beta program since it has speech recognition. Your information should help me porting my Blackout Swype themes over to the MT4G with creating a proper flashable zip that will work with any ROM, and for that I thank you.
creator2456 said:
When I pushed the files to CM7 I completely forgot about checking permissions when it didn't work.
I do however prefer the newest Swype from the beta program since it has speech recognition. Your information should help me porting my Blackout Swype themes over to the MT4G with creating a proper flashable zip that will work with any ROM, and for that I thank you.
Click to expand...
Click to collapse
No problem, I was thinking of creating a flashable zip for my cousin, he doesn't like to mess around with this stuff... but he lives on the computer, go figure. I just need the signing app, actually its not needed with the new recoveries that allow unsigned zips to be flashed, but it would be nice.
I cant get the swype from iced glacier onto cm7. I follow all the steps perfectly and can select the swype keyboard but when I try to type nothing happens except a flashing blue border around the keyboard. Its pretty annoying.
Jacezo said:
I cant get the swype from iced glacier onto cm7. I follow all the steps perfectly and can select the swype keyboard but when I try to type nothing happens except a flashing blue border around the keyboard. Its pretty annoying.
Click to expand...
Click to collapse
Thats odd, I used this to get it on to CM7 and it works fine. Where did you source the files from? Permissions are rw-r-r?
Thanks so much for this! I don't use the voice feature and I always hit it on accident, so I've been missing the stock version. I also didn't care for the blue all that much.
I am new to this. Could I use this technic for the others stock apps (calendar, clock/weather widgets...)? Thanks!
A23E said:
I am new to this. Could I use this technic for the others stock apps (calendar, clock/weather widgets...)? Thanks!
Click to expand...
Click to collapse
No, the apps you are speaking of are HTC apps. They are integrated into the HTC Sense framework.
Moving default apps between ROMs that have custom UIs, like sense, can be problematic. Many default apps have been setup to work with the custom UI and framework only.
Marine6680 said:
Thats odd, I used this to get it on to CM7 and it works fine. Where did you source the files from? Permissions are rw-r-r?
Click to expand...
Click to collapse
I took the files from an iced glacier rom and fixed the permissions. I'm on cm7 rc1 with the dumguq smartass kernel.
Sent from my HTC Glacier using XDA App
Jacezo said:
I took the files from an iced glacier rom and fixed the permissions. I'm on cm7 rc1 with the dumguq smartass kernel.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
All I can think to do is try again. It may be the kernel as well.
great help and easy to follow, thanks
Glad it helped.
hav'nt tried your way, but what i did was got those 2 files form new mytouch 2.3.4 (swype 3.7) and copied it to panache stock custom then cooked and flashed, but now it says wrong licence.....
atifsh said:
hav'nt tried your way, but what i did was got those 2 files form new mytouch 2.3.4 (swype 3.7) and copied it to panache stock custom then cooked and flashed, but now it says wrong licence.....
Click to expand...
Click to collapse
Probably has a device check, and the ROM you are using is giving the wrong device.
I believe the panache is the Canadian version, so it may be that the licence is regional as well.
License issues for me.on virtuous unity 1.29 and fauxkernel
Sent from my HTC Glacier using XDA Premium App
valve timing said:
License issues for me.on virtuous unity 1.29 and fauxkernel
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
Same, I wonder if it's something to do with our build.prop?
Sent from my HTC Glacier using XDA App
Sadness i want swype guess ill go.back to beta
Sent from my HTC Glacier using XDA Premium App
valve timing said:
Sadness i want swype guess ill go.back to beta
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
I figured it out for us (those of us on Virtuous Unity)!!! Haha, I'm so stoked. K, so I changed my build.prop of ro.product.brand to =tmobile, I think it's originally htc_wwe or something (This was after extracting my system backup for stock froyo and comparing the differences). Then uninstalled swype, rebooted, and then followed the terminal steps listed in the OP. Good luck.
Sent from my HTC Glacier using XDA App
eliasadrian said:
I figured it out for us (those of us on Virtuous Unity)!!! Haha, I'm so stoked. K, so I changed my build.prop of ro.product.brand to =tmobile, I think it's originally htc_wwe or something (This was after extracting my system backup for stock froyo and comparing the differences). Then uninstalled swype, rebooted, and then followed the terminal steps listed in the OP. Good luck.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
I can confirm that this works
First of all..
THIS DOES NOT INCLUDE SWYPE!!!!
Also, I am not responsible for anything you do to your phone...
This is just a zip file that can be used to install swype to a custom rom.
What is Needed...
1)The attached Zip file
2)Swype.apk and libswypecore.so
3)Clockwork Recovery (i tested using clockwork 3.0.0.6)
4)7-Zip (or any other zip utility that can place files into a zip without extracting)
How to...
1) Open up the attached file in 7-Zip
2) Place Swype.apk in the "app" folder
3) Place libswypecore.so in the "lib" folder
4) Place the zip file in your sdcard
5) Boot into recovery
6) Go to mounts and storage
7) Mount "system"
8) Go to the main menu and install the zip file
9) Reboot and go to any text field
10) Hold the text field until a popup appears
11) Click "input method"
12) Select Swype
If for some reason it does not work, go to the system folder using root explorer or something similar and make sure the permissions are as follows for both the Swype.apk and the libswypecore.so
User: Read Write
Group:Read
Others:Read
If this procedure does not work for any reason, please send me a pm with the following information
1) Rom
2) Recovery Version
Also: Special Thanks to Marine6680
This is just a zip file.
TrueBlue_Drew said:
This is just a zip file.
Click to expand...
Click to collapse
yes, but my reason for posting it is because it contains the script to flash along with it being signed. this way the only thing missing are the files.
VibrantOwnr said:
First of all..
THIS DOES NOT INCLUDE SWYPE!!!!
Also, I am not responsible for anything you do to your phone...
This is just a zip file that can be used to install swype to a custom rom.
What is Needed...
1)The attached Zip file
2)Swype.apk and libswypecore.so
3)Clockwork Recovery (i tested using clockwork 3.0.0.6)
4)7-Zip (or any other zip utility that can place files into a zip without extracting)
How to...
1) Open up the attached file in 7-Zip
2) Place Swype.apk in the "app" folder
3) Place libswypecore.so in the "lib" folder
4) Place the zip file in your sdcard
5) Boot into recovery
6) Go to mounts and storage
7) Mount "system"
8) Go to the main menu and install the zip file
9) Reboot and go to any text field
10) Hold the text field until a popup appears
11) Click "input method"
12) Select Swype
If for some reason it does not work, go to the system folder using root explorer or something similar and make sure the permissions are as follows for both the Swype.apk and the libswypecore.so
User: Read Write
Group:Read
Others:Read
If this procedure does not work for any reason, please send me a pm with the following information
1) Rom
2) Recovery Version
Also: Special Thanks to Marine6680
Click to expand...
Click to collapse
An easier way to do this, which is what I have been doing, is to simply use a File Manager with Read/Write (Root) privileges and copy the libswypecore.so file into your system/lib directory and then install the Swype.apk like a normal app. This way you can do everything without needing to reboot.
I installed by giving them my email getting the apk and installing...you could almost calk it average lol
Sent from my HTC Glacier using XDA Premium App
can someone provide me a copy of swype.apk and libswypecore.so? Thanks.
Comment removed.
Didn't know it was against the rules to post the .apk.
My bad!
@aussiehairspray
If I'm not mistaken, I don't think this is allowed to be posted... Swype's rules.
I'm no admin but I just don't want to see you get in trouble.
schizopunk said:
@aussiehairspray
If I'm not mistaken, I don't think this is allowed to be posted... Swype's rules.
I'm no admin but I just don't want to see you get in trouble.
Click to expand...
Click to collapse
You are not mistaken. Posting the swype apk and lib files is not allowed and is actually illegal
Sent from my HTC Glacier using XDA App
AGx-07_162 said:
An easier way to do this, which is what I have been doing, is to simply use a File Manager with Read/Write (Root) privileges and copy the libswypecore.so file into your system/lib directory and then install the Swype.apk like a normal app. This way you can do everything without needing to reboot.
Click to expand...
Click to collapse
I posted this so o once you add the files you can just flash this anytime you flash a new rom. this would mainly help crackfkashers. For Every one else, your methods may be easier/faster
Sent from my HTC Glacier using XDA App
so quick question, how would I go about uninstalling this?
Swype FCs every time it tries to load.
Mytouch 4g CM 7.02
I'm getting force closes as well using the files posted here. I followed these instructions here because after installing via the sywpe installer beta everytime I rebooted my phone it wouldn't trace anymore. To fix this I needed to disable and reenable swype. So as of right now I'm still outta luck.
To remove swype though simply go into titanium and scroll down to swype and delete it.
Sent from my HTC Glacier using XDA App
Unfortunately swype force closes are not due to this zip and chances are it is the ROM. I would suggest trying fix permissions from recovery or ROM manager. Other than that I would not know what would be causing the force closes.
Sent from my myTouch_4G_Slide using XDA App
maybe i'm confused but i just went to swype.com and registered for beta and it works fine
is this different?
Before I ever tried the files here I used the beta installer that I registered and it seemed like everytime I rebooted it wouldn't swype anymore and the keyboard would flash like an error. I've been running cyanogenmod nightlies, currently on 61. I've tried fixing permissions before but it never corrected the issue.
Sent from my HTC Glacier using XDA App
I tried the Root Explorer method with the same results. No matter what I do to install Swype on any ROM other than CM7, I can't get the keyboard to "swype". I've even created a new account with swype to download it again with no luck. I'm close to using something other than CM7 as my daily ROM but I need Swype! Any more ideas?
Thanks!!
When it won't swype after reboot. Try selecting another board, type something, then go back to swype and slide. Used to work for me when I was using swype
this worked flawlessly! thanks
im running nightlies. i downloaded iced glacier for the original swpe .apk and libswpe files. just selected update zip from sdcard in clockwork.
forse closes, then i uninstalled and uses root explorer to copy both files, than i change the permissions, it worked but gave error about licencing, that this is for some other device. im using htc panache stock GB ROM.
than yesterday i realized new beta is out i re-registered and installed the latest beta which is ofcourse much better , only thing im missing is light colored theme of oribngnal swype.
atifsh said:
forse closes, then i uninstalled and uses root explorer to copy both files, than i change the permissions, it worked but gave error about licencing, that this is for some other device. im using htc panache stock GB ROM.
than yesterday i realized new beta is out i re-registered and installed the latest beta which is ofcourse much better , only thing im missing is light colored theme of oribngnal swype.
Click to expand...
Click to collapse
I got the constant force close using the new swype 3.0 the way I fixed it was deleted it then right after I reinstalled it I rebooted in to recovery and cleared both caches and fixed permissions. I don't think rom manager fix permission is working right for this version.
I'm running newtoroot's senseless 4.0.3 and am loving it. The one problem that was bugging me was the fact that there was no dictionary accompanied with the keyboard, and it would say every word that you typed is incorrect. Well I found a fix.
1. Download these two files: LatinImeGoogle.apk & LatinImeDictionaryPack.apk
2. Put the apk's onto your sd card
3. Copy the apk's
4. Navigate to /system/app and paste the apk's into the directory
5. Rename (or delete) the file titled "LatinIME.apk"
6. You now have a working dictionary for your keyboard!
zZDave_Stud said:
I'm running newtoroot's senseless 4.0.3 and am loving it. The one problem that was bugging me was the fact that there was no dictionary accompanied with the keyboard, and it would say every word that you typed is incorrect. Well I found a fix.
Click to expand...
Click to collapse
Awesome. You rock, dude.
Many thanks good Sir!!!
WHere can I find other language dictionaries?
Dude, you rock! Thanks so much for this, worked like a charm on my Samsung Skyrocket (i727) running leaked ICS.
Cheers!
Got it thanks mjones.
iceman4357 said:
I must be having a brain fart moment. I tried with astro and root explorer and it says the system/app is a read only and will not let me copy them over. Help?
Is this an adb only mod?
Click to expand...
Click to collapse
Go to /system/app in Root Explorer and hit the R/W button.
You're very welcome everyone!
Not installed on my phonr
Sent from my LG-P990 using xda premium
Spell check does not work with the Russian language, with only five standard languages.
Additional dictionaries can only work correctly with auto-correction
Apparently, the spell checker uses the same dictionaries as the auto-correction, but to check the spelling was not announced additional languages
Who can tell about this problem? ;-)
I can't seem to paste nor rename the default apk file in the /system/app folder. I checked the SU, and ES Explorer has been granted the (root) permission.. What did I do wrong??
Sian said:
I can't seem to paste nor rename the default apk file in the /system/app folder. I checked the SU, and ES Explorer has been granted the (root) permission.. What did I do wrong??
Click to expand...
Click to collapse
In ES, use the menu system to remount as R/W then try again. Even with root you're still limited to a read-only file system unless you do that.
Sent from my ADR6425LVW using XDA
Dude, you are the man. Mad props on this one.
zZDave_Stud said:
1. Download these two files:
2. Put the apk's onto your sd card
3. Copy the apk's
4. Navigate to /system/app and paste the apk's into the directory
5. Rename (or delete) the file titled "LatinIME.apk"
6. You now have a working dictionary for your keyboard!
Click to expand...
Click to collapse
I tried it, buy ni my case it doesn't work
before this try, my tablet was sign almost every words in red (except some name, or some word)
now, my tablet, doesn't make any king of spelling check :-(
but the "automatic correction" is enabled in the system setting
Why? some one can help?
is this the reason why swype doesnt give me a choice of words anymore?
Thanks!
Took me a while to get r/w to system/apps but once there the T9 and massively irritating underlining of every word has gone.
Awesome thank you so much.
Tnks
Works also with Spanish Dictionary Tnks
-----------------------------
Muchas Gracias
Thanks for LatinImeGoogle.apk & LatinImeDictionaryPack.apk and the instructions!
Solved the problem on my iDeaUSA CT702 / YG A777 tablet running Android 4.0.3
Thanks for you post! Just fixed a Nitro HD w/ MIUI 2.9.29 rom with your files. Much appreciated.
not working
I have a Motorola Xoom FE, just got ICS today. tried this fix and it did not work. I was getting an operation error on the delete/rename. I went back in mounted after R/W and it still wasn't allowing it. Suggestions? All these red lines are driving me bananas....
Hi all... Just want to share.. Sorry if everyone already knows it..
When you change the dpi to other than 160, the most notable problem are the fc when you made/recieve call..
So, i look into other phone forums and found the solution. One of them are;
HERE
The file (Phone.apk) are attached or you can get from the thread as well.
I've tested and confirm working (dpi 140 as thats the dpi i wish for, not too small as 120). Not tested on other dpi other than that. Appreciate if you all can give feedback either it is working or not if you set dpi to other than what i've tested (140) for my/other members references.
How to apply:
1. Download the Phone.apk (from attachment or from the other thread above)
2. Copy to your sdcard (Skip this if you use adb)
3. copy to /system/app/
4. change permission to rw-r--r--
5. delete Phone.odex (Don't forget this step)
6. Reboot
Now you can apply cm9 HDPI themes and continue using it without the needs to change dpi back to 160!
I don't think I'll need this just now, but just acknowledge your effort :thumbup:
Sent from my Legend using xda app-developers app
150dpi works
Sent from my Legend using XDA
Works nice on 132dpi, tyvm!
Woks on SGSII
Thanks!
This fix works on cm9-20120714-NIGHTLY-galaxys2.zip!
HI! I want to ask something that maybe will sound stupid, in what folder is the phone.odex app? Because i can not fix the problem using the =/Vex paranoid rom... I used root explorer to search on "system/" folder.
ehmad said:
HI! I want to ask something that maybe will sound stupid, in what folder is the phone.odex app? Because i can not fix the problem using the =/Vex paranoid rom... I used root explorer to search on "system/" folder.
Click to expand...
Click to collapse
That ROM is already de-odex so there will be no Phone.odex in that folder, i might need to add that portion into the instruction; Skip step 6 if your ROM is deodexed)
You might need to clear dalvik-cache after replacing the file. reboot into cwm, advance, wipe dalvik-cache
Thanks man it really worked what a relief. :thumbup:
Sent from my Legend using xda app-developers app
feed3 said:
That ROM is already de-odex so there will be no Phone.odex in that folder, i might need to add that portion into the instruction; Skip step 6 if your ROM is deodexed)
You might need to clear dalvik-cache after replacing the file. reboot into cwm, advance, wipe dalvik-cache
Click to expand...
Click to collapse
Now i've seen that post, i'd to clean my sd card (in case that some file are make some conflict in my intention to solve this) and i will follow your instructions - but now step by step except the 6 x-D
:fingers-crossed:
ehmad said:
Now i've seen that post, i'd to clean my sd card (in case that some file are make some conflict in my intention to solve this) and i will follow your instructions - but now step by step except the 6 x-D
:fingers-crossed:
Click to expand...
Click to collapse
Maybe you can try do clean installation and replace the file but i think alex have been put it(fixed phone.apk) as default in v2?
Hope it work with you as with the others here so that we all can have fun together.. Good luck..
Does the sliders button on incoming call are where are they belongs on middle of screen or under the screen
Sent from my LG-P500 using Tapatalk 2
All well and good, except...
During the call, the keypad does not show the "1" key, but it works when you press. Can anyone fix it?
This build is ported from http://forum.xda-developers.com/showthread.php?t=1769077 (Thanks jamal2367) using Portadroid http://forum.xda-developers.com/showthread.php?t=1094372 (thanks boonbing)
Credits and thanks to jamal2367, tytung, boonbing, CM9 team, cmhtcleo & team, securecrt, Xylograph, Rick_1995, ankuch, wis1152 and all others, sorry if I have missed any
I am not a developer, but I hope to be able to provide ongoing support for this thread.
Instructions:
Well you know just extract everything and put the BlueoICS folder in your root of sd card. If WM6.5 tap on clrcad (nothing appears to happen) then haret, if magldr navigate to BlueoICS folder using ad-sd dir and select BlueoICS folder then boot AD SD.
Please remember to REBOOT X 3
Magldr users can get 1Gb blank data.ext4 from here http://forum.xda-developers.com/showpost.php?p=28873233&postcount=32 Thanks NYSEAN1
Latest Kernels can be found here http://forum.xda-developers.com/showpost.php?p=29248688&postcount=4
Default launcher is touchwiz, but it only works at 240 DIP, use Nova or Apex launcher from market if you prefer other densities.
Softkeys are included by default. They can be deactivated by moving local.prop (using a root browser) from /data folder to anywhere on sd and rebooting. I think its easier this way, If you want it back, put it back
Version 1.1
Google Now included, see parent thread for changelog.
Folder name is called ics. Softkeys not included by default. Will tidy this post up a bit tomorrow and add mirror.
Download http://d-h.st/ODJ
Version 1.0
Download http://www.mediafire.com/?biq5sgbsbb2jd7w md5sum=ace05486112cdc5cd256f8129ace2706
Mirror http://d-h.st/91a
<>
Reserved for a couple of screenshots
<>
reserved again
Thanks for your job. It is great!
thank you, will try.
Thank you so much man. I've been waiting for this one to be ported for 3 days now. YES!!!
Thanks again Robbie P
Thank you
rom is very smooth
but there are no soft keyes
rebooted 3ice
still no soft keyes
please attach files to activate soft keyes
thanks in advance.
Here you go.
Sean Sounds said:
Here you go.
Click to expand...
Click to collapse
how can use ?
sorry for my english
lungtung123 said:
how can use ?
sorry for my english
Click to expand...
Click to collapse
Unzip the file which contains the "local.prop" file and place it on your sdcard. Then use Root Explorer or ES File Explorer to place the file in the /data folder.
I am trying this rom, it seems all working well, it´s just a bit "naked" because the lack of ringtones and background pictures but I can´t find Radio FM app, where it is, please?
It´s more important to me than softkeys.
Check tytung's nexushd2 sd thread for spirit FM instructions
Sent from my HTC HD2 using XDA
Sean Sounds said:
Unzip the file which contains the "local.prop" file and place it on your sdcard. Then use Root Explorer or ES File Explorer to place the file in the /data folder.
Click to expand...
Click to collapse
Hi, the pasting in /data folder is not allowed on my device
jjollyroger said:
Hi, the pasting in /data folder is not allowed on my device
Click to expand...
Click to collapse
You need an app with root permissions, try root browser lite from market and enable root when installing
Sent from my HTC HD2 using XDA
Robbie P said:
You need an app with root permissions, try root browser lite from market and enable root when installing
Click to expand...
Click to collapse
thanx, I noticed that option just now, I'm using File Manager hd and needed to go to its settings firstly.
Just done and worked fine.
good congratulation to this rom stable and fluid
but I have a problem when I load the launcher to change the lockscreen wallpaper and down and it will not change for the
Anyone know how to change the lockscreen wallpaper without being hereby
could we have the path as to where to place the data folder with the file to activate the soft buttons please
sfeira31 said:
good congratulation to this rom stable and fluid
but I have a problem when I load the launcher to change the lockscreen wallpaper and down and it will not change for the
Anyone know how to change the lockscreen wallpaper without being hereby
Click to expand...
Click to collapse
Agree, in touchwiz long press on blank screen area allows you to change homescreen but not lockscreen (no options) and only 1 live wallpaper option for both. Try another launcher.
arungk2 said:
could we have the path as to where to place the data folder with the file to activate the soft buttons please
Click to expand...
Click to collapse
you just need to put the local.prop file into /data folder using a root enabled browser and reboot. The data folder is not on your sdcard but at the root (home icon on some browsers) of the android build.