[Q] Issue with recovery with a dead home button - Galaxy S II Q&A, Help & Troubleshooting

Hey guys,
I have a big problem when my phone ran into a problem where the home button does not work. I have read that I can potentially solve the problem by re-flashing the firmware on the phone but I am unsure how I am going to wipe the cache on my phone without the home button. I can get into recovery mode fine but I can't select anyone since the home button doesn't work.
Any help on this would be appreciated. Thanks!

Well, I dont know you, but when I'm in CWM recovery mode, I use the volume button to navigate and the power button to select.

restlesssoul said:
Well, I dont know you, but when I'm in CWM recovery mode, I use the volume button to navigate and the power button to select.
Click to expand...
Click to collapse
It depends on the version of CWM you have, some versions use the power button as a "go back" button, and ohers as a select button just as the home button.
Can you get into download mode? because if you can you could try flashing stock firmware via odin, re rooting and then enter CWM again and see if it's fixed.

tomascunill said:
It depends on the version of CWM you have, some versions use the power button as a "go back" button, and ohers as a select button just as the home button.
Click to expand...
Click to collapse
Didn't know that... I'm using 4.0.0.5... Hope he's too
Sometimes the power button works as back button, but I don't know why. Maybe I long pressed the power button and it changed, dunno...

So since I couldn't wipe the cache I loaded the stock firmware in, now I'm stuck on a bootloop
What do I do now?

So I got the phone back up and running again but still no home button.... Does this mean my home button is permanently done even though I can still get into download and recovery?
Any help is appreciated here. thanks guys

Hi have you fixed your problem out? I have a dead home button and ended up flashing stock rom viva Odin but still not working. It was partly working before it became dead. Is this a hardware problem or a software one. I'm going to Hong Kong in a few days and see if anyone can fix/replace the button, but if its a software problem it might be more problematic.
I did strip down the phone but couldnt get to the button, realised I have to remove the digitizer just to get there which I am not too keen on.
Any suggestions would be great before I take it to repair or end up selling it and get myself a new phone.

Related

[Q] ClockWorkMod Won't Do Anything...

Hey guys. I made a video showing what I mean but that didn't work out. I'll try and explain it the best I can.
So I have an HTC Evo 3D rooted with Revolutionary with S-Off. The phone was working fine until recently. I have ClockWorkMod 5.0.2.0
When I go into CWM (power + volume down), it loads fine but won't let me access any menus. When I scroll down and select any option, the list just goes away and the CWM logo is all that's on my screen. If I click power again, the menu comes back. No matter what I select, this happens, even power down. The only way to reset my phone is to pull the battery.
Any ideas as to why this is happening? If there is an issue with the version, is there a way to upgrade/downgrade versions?
I would really like to load things from my SD card again.
Thanks in advanced,
Kyle
You pressed the power button to select options?supposingly you should use the volume button to scroll,power button for back and home button for select...
Sent from my GT-S5830 using xda premium
How can I fix my rooted HTC EVO 3D??
Hi, I have bought the htc evo 3d three months ago and I rooted it at May...yesterday I've tried to install a rom and then it stucks..the clockwork mod doesn't work and now I can't power it on....what can I do???Is there way to fix that or not?? Please find a way....
Thanks
xSLWRTHNUx said:
When I go into CWM (power + volume down), it loads fine but won't let me access any menus. When I scroll down and select any option, the list just goes away and the CWM logo is all that's on my screen. If I click power again, the menu comes back. No matter what I select, this happens, even power down. The only way to reset my phone is to pull the battery.
Click to expand...
Click to collapse
I have exactly the same problem with my ZTE Blade, CWM5.0.2.0
I can navigate through the home menu OK, but selecting any option only results in a blank screen with the CWM logo in the middle.
A button press takes me back to the home menu again.
Any ideas anyone?
Richard

[Q] Help! Messed with 'Simulate Secondary Display' settings!

Hi,
I'm new to xda, I was on CM10.1 nightly build 29th Dec, and I was just checking the dev options to see what was what. When I changed
the 'Simulate Secondary Display' settings the phone just froze. It's perfectly fine, everythings there, it's just that when I boot it, it shows the boot logo and when its about to show the home screen it freezes. I know its not bricked, and I know all I have to do is change the Dev Options. Could
someone plz tell me how? I actually have important messages and pictures that I don't want to lose.
Thanks in advance
meyou12345 said:
Hi,
I'm new to xda, I was on CM10.1 nightly build 29th Dec, and I was just checking the dev options to see what was what. When I changed
the 'Simulate Secondary Display' settings the phone just froze. It's perfectly fine, everythings there, it's just that when I boot it, it shows the boot logo and when its about to show the home screen it freezes. I know its not bricked, and I know all I have to do is change the Dev Options. Could
someone plz tell me how? I actually have important messages and pictures that I don't want to lose.
Thanks in advance
Click to expand...
Click to collapse
Simply re-flash the Rom once again without any wipes and see
Sun90 said:
Simply re-flash the Rom once again without any wipes and see
Click to expand...
Click to collapse
No luck It did the same thing again
meyou12345 said:
No luck It did the same thing again
Click to expand...
Click to collapse
I'm in the same situation. Anyone know of a solution?
inversechi said:
I'm in the same situation. Anyone know of a solution?
Click to expand...
Click to collapse
Flash a different rom like stock based custom rom and install cm10.1 again if you want to
Thankfully I had a fairly recent Titanium Backup so I only lost a small amount of data + time. I hope you manage to find a solution as you said you have important messages and all.
Wiping cache doesn't help. I'm still stuck. :crying:
--- Edited ---
My itchy hand touch that setting as well. Stuck at CM10.1 boot screen.
Solution: Just boot into recovery, wipe cache and reboot. Done and everything working as usual.
Same question
I wiped cache and davkit cache in recovery but no luck
I would like to know the function of this option
tltan86 said:
Wiping cache doesn't help. I'm still stuck. :crying:
--- Edited ---
My itchy hand touch that setting as well. Stuck at CM10.1 boot screen.
Solution: Just boot into recovery, wipe cache and reboot. Done and everything working as usual.
Click to expand...
Click to collapse
vioyrbr said:
Same question
I wiped cache and davkit cache in recovery but no luck
I would like to know the function of this option
Click to expand...
Click to collapse
1. use Safe mode. (I just pressed all button except power button, and it booted.)
2. disable Simulate Secondary Display.
3. reboot
(side effect : all widgets will be disappeared)
lion0738 said:
1. use Safe mode. (I just pressed all button except power button, and it booted.)
2. disable Simulate Secondary Display.
3. reboot
(side effect : all widgets will be disappeared)
Click to expand...
Click to collapse
thank you so much. this work for me
now can boot normal without wipe data
lion0738 said:
1. use Safe mode. (I just pressed all button except power button, and it booted.)
2. disable Simulate Secondary Display.
3. reboot
(side effect : all widgets will be disappeared)
Click to expand...
Click to collapse
wow, it works, thank u so much! and for the first time I realise that android has a safe mode just like my windows ! feel shame for my poor knowledge
I couldn't enter safe mode. Presing Vol up+ Vol down should enter safe mode?
M3n0 said:
I couldn't enter safe mode. Presing Vol up+ Vol down should enter safe mode?
Click to expand...
Click to collapse
Yes. I just found this thread because i also locked my S2 activating "second display" and looked for a way to boot up in safe mode.
1. Turn off your phone by long pressing the Power button.
2. Press Up/Down Volume buttons (yes, both) and Power button at the same time.
3. Keep pressing all 3 buttons until boot-up image appears.
4. Release Power button while still pressing volume buttons (not sure if this is mandatory, but worked on my phone)
5. Phone will boot-up with "Safe-mode" badge in the lower-left corner of your screen.
Now go to Settings-Developer options and disable Second Display. After that, just reboot and you should be fine.
brotakul said:
Yes. I just found this thread because i also locked my S2 activating "second display" and looked for a way to boot up in safe mode.
1. Turn off your phone by long pressing the Power button.
2. Press Up/Down Volume buttons (yes, both) and Power button at the same time.
3. Keep pressing all 3 buttons until boot-up image appears.
4. Release Power button while still pressing volume buttons (not sure if this is mandatory, but worked on my phone)
5. Phone will boot-up with "Safe-mode" badge in the lower-left corner of your screen.
Now go to Settings-Developer options and disable Second Display. After that, just reboot and you should be fine.
Click to expand...
Click to collapse
amazing. i also didn't know you could boot into safemode. and i thought i was pretty well versed !
cheers to you sir
Dachozenwon said:
amazing. i also didn't know you could boot into safemode. and i thought i was pretty well versed !
cheers to you sir
Click to expand...
Click to collapse
confirmed dirty flash does NOT work
confirmed flash 10.1 nonofficial then re flash DOES work
anybody try a restore?? seemed to work for me except i only had an ancient one... plus the safe mode trick seems better unless you just made a backup
im on rezound infected 2.2 JB 4.2.2 by the way and safe mode didn't seem to work but i just read the part where you hold volume buttons after letting go of the power button. so that might work for rezounds still
lion0738 said:
1. use Safe mode. (I just pressed all button except power button, and it booted.)
2. disable Simulate Secondary Display.
3. reboot
(side effect : all widgets will be disappeared)
Click to expand...
Click to collapse
I never realized safe mode existed before.. Thank you! I also changed simulate secondary display settings, and boot into safe mode solved it. Thanks again. Almost wiped my data..
Thank you
Thank you very much, you saved my life!
brotakul said:
1. Turn off your phone by long pressing the Power button.
2. Press Up/Down Volume buttons (yes, both) and Power button at the same time.
3. Keep pressing all 3 buttons until boot-up image appears.
4. Release Power button while still pressing volume buttons (not sure if this is mandatory, but worked on my phone)
5. Phone will boot-up with "Safe-mode" badge in the lower-left corner of your screen.
Click to expand...
Click to collapse
Seems not to work on HTC Desire Z. In a 3 seconds after holding volume buttons and power button, LED lights up in green and remains in this state. Using Jelly Baby 1.5.0.
Any other way?
EDIT: I found one. Turn on the phone and when on HTC logo, hold S button on QWERTY keyboard until home screen show up.
TheReduxPL said:
Seems not to work on HTC Desire Z. In a 3 seconds after holding volume buttons and power button, LED lights up in green and remains in this state. Using Jelly Baby 1.5.0.
Any other way?
EDIT: I found one. Turn on the phone and when on HTC logo, hold S button on QWERTY keyboard until home screen show up.
Click to expand...
Click to collapse
different phone, different method. the above applies to i9100.
glad you found a way for your HTC.
I wasn't able to boot into safe mode for some reason (HTC Evo with non-stock ROM). My solution was to use adb to edit the settings sqlite database.
Here is the guide I found: blog.jbit.net/2013/01/android-settings-reset-using-adb.html

[Q] Help - Flash ROM in Huawei G525

Is there a way on how to flash ROM on Huawei Ascend G525? I had just done rooting this phone. Also, I don't know how to navigate to the recovery of this phone, I did try to press the power on button with the up and down volume keys but it did not go to the recovery. Is there any solution for this?
If you want to go to recovery mode or CWM, press and hold the back key + volume down and press the power button.
When the screen flashes, let go.
And it's done, try it.
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
Claxc Designs said:
If you want to go to recovery mode or CWM, press and hold the back key + volume down and press the power button.
When the screen flashes, let go.
And it's done, try it.
Hit the thanks button if it helps.
Sent from my Xperia Arc S using xda premium
Click to expand...
Click to collapse
i tried your way but I failed, it did not rebooted to the cwm. i think there is no hard back key in my handset, it will not work/function when a phone is turned off. keys that would work are only the power button and the volume up/down keys.
Disable Fast Boot for Recovery
Hi, It is as you wrote earlier, volume up and down keys and then press power, But for this to work you have to either disable Fast Boot from settings > all and 2nd last option, or you can remove battery for two seconds at least to force mobile complete shut down.
Hope this helps
saleemafaq said:
Hi, It is as you wrote earlier, volume up and down keys and then press power, But for this to work you have to either disable Fast Boot from settings > all and 2nd last option, or you can remove battery for two seconds at least to force mobile complete shut down.
Hope this helps
Click to expand...
Click to collapse
Actually there is no clockwordmod installed on G525. Let us wait for developers to work on it. Currently, I found a Chinese language custom recovery available in the internet. You can try that if you want. Just searh on google "G525 CWM".

[Q] Asus Transformer Pad TF103C Tablet factory reset

hi .
i have the "Asus Transformer Pad TF103C" Tablet , and after i installed a game on in the tablet started to do reboot after reboot (with out being able to start).
since i can not start it , how can i factory restore it and make it start again ?
thx to all the helpers .
sagi_bb said:
hi .
i have the "Asus Transformer Pad TF103C" Tablet , and after i installed a game on in the tablet started to do reboot after reboot (with out being able to start).
since i can not start it , how can i factory restore it and make it start again ?
thx to all the helpers .
Click to expand...
Click to collapse
Hard to think that just a game would cause that to happen, but weirder things have happened...
I found this:
How to boot device into Safe Mode.
1. Press and hold the Volume - button and power button (while device is on).
2. When screen turns black release the power button, but remain holding the Volume - button.
Device should boot into safe mode.
If this works for you, then you should be able to boot the tablet with just the preinstalled apps available and then you should be able to uninstall the game in question and reboot normally.
es0tericcha0s said:
Hard to think that just a game would cause that to happen, but weirder things have happened...
I found this:
How to boot device into Safe Mode.
1. Press and hold the Volume - button and power button (while device is on).
2. When screen turns black release the power button, but remain holding the Volume - button.
Device should boot into safe mode.
If this works for you, then you should be able to boot the tablet with just the preinstalled apps available and then you should be able to uninstall the game in question and reboot normally.
Click to expand...
Click to collapse
it does not works.
should i press the volume up or down button ?
" Volume - " = " Volume down "
es0tericcha0s said:
" Volume - " = " Volume down "
Click to expand...
Click to collapse
maby i am doing somthing wrong but it does not work.
you understand that it does not start and is always in the loading screen .
http://forum.xda-developers.com/showpost.php?p=55074298&postcount=18
*shrug* Not sure what else to tell you... Doesn't the tablet restart itself after holding the power button for however long like every other tablet out there...?
es0tericcha0s said:
http://forum.xda-developers.com/showpost.php?p=55074298&postcount=18
*shrug* Not sure what else to tell you... Doesn't the tablet restart itself after holding the power button for however long like every other tablet out there...?
Click to expand...
Click to collapse
it does, but it want complete the reboot .
the reboot screen just keep reappearing over and over again .
sagi_bb said:
it does, but it want complete the reboot .
the reboot screen just keep reappearing over and over again .
Click to expand...
Click to collapse
this is how my bootload looks like . (volume up+power button when the tablet is off) .
as you can see there is no format or anything :crying:
Well I'm not sure what your bootloader screen, which you have to use the opposite Volume button to get to, has to do with getting into Safe Mode, but ok...
es0tericcha0s said:
Well I'm not sure what your bootloader screen, which you have to use the opposite Volume button to get to, has to do with getting into Safe Mode, but ok...
Click to expand...
Click to collapse
soory pic was added
sagi_bb said:
soory pic was added
Click to expand...
Click to collapse
Can you navigate to the Recovery option there? If so, your factory reset option should be there. I still think it would be able to boot into Safe Mode so you can just uninstall the offending app and not lose your data. But anyway, if those options don't work, you could try grabbing an update zip from Asus and see if applying that will get it going again.
http://www.asus.com/us/Tablets/ASUS_Transformer_Pad_TF103C/HelpDesk_Download/
What app did you install, by the way, so others might be warned against using it to avoid this situation...?
es0tericcha0s said:
Can you navigate to the Recovery option there? If so, your factory reset option should be there. I still think it would be able to boot into Safe Mode so you can just uninstall the offending app and not lose your data. But anyway, if those options don't work, you could try grabbing an update zip from Asus and see if applying that will get it going again.
http://www.asus.com/us/Tablets/ASUS_Transformer_Pad_TF103C/HelpDesk_Download/
What app did you install, by the way, so others might be warned against using it to avoid this situation...?
Click to expand...
Click to collapse
hi.
1) i dont remember the name of the game but it was some kind of flight simulator .
2) in the recovery screen i see an "open chest" droid with no options but a "no comand" massage .
3) i tried the safe mood again and it does not work . on the loading screen (the one with the asus logo in the middle and intel logo in the buttom) i press the volume - and the power button until the tablet shuts off the i keep pressing only the volume - and nothing hapen , after i release the volume button nothing hapen again .
4) i am not sure how to how to apply the update.zip from asus .
sagi_bb said:
hi.
1) i dont remember the name of the game but it was some kind of flight simulator .
2) in the recovery screen i see an "open chest" droid with no options but a "no comand" massage .
3) i tried the safe mood again and it does not work . on the loading screen (the one with the asus logo in the middle and intel logo in the buttom) i press the volume - and the power button until the tablet shuts off the i keep pressing only the volume - and nothing hapen , after i release the volume button nothing hapen again .
4) i am not sure how to how to apply the update.zip from asus .
Click to expand...
Click to collapse
Typically, in stock recoveries, when you see the Android guy there's usually a button combo to get the commands for reboot, reset, update, etc to pop up. Usually this would be like hitting the Volume keys together or some combo of Volume and Power buttons. Unfortunately, there isn't that much info about this particular Asus tablet as the TF300 and TF700 that I am more familiar with, so can't tell you with absolutely certainy how to do it.
es0tericcha0s said:
Typically, in stock recoveries, when you see the Android guy there's usually a button combo to get the commands for reboot, reset, update, etc to pop up. Usually this would be like hitting the Volume keys together or some combo of Volume and Power buttons. Unfortunately, there isn't that much info about this particular Asus tablet as the TF300 and TF700 that I am more familiar with, so can't tell you with absolutely certainy how to do it.
Click to expand...
Click to collapse
The OTA zip they supply doesn't appear to be able to installed via recovery, and they don't have a system.img for flashing. Here is my current thread on the issue.
http://forum.xda-developers.com/android/help/build-img-update-zip-ota-package-t2887847
Eclipse00 said:
The OTA zip they supply doesn't appear to be able to installed via recovery, and they don't have a system.img for flashing. Here is my current thread on the issue.
http://forum.xda-developers.com/android/help/build-img-update-zip-ota-package-t2887847
Click to expand...
Click to collapse
Sorry about the OTA zip, I didn't read it closely enough for the install instructions. I don't know why you think the system is gone seeing as how the stock recovery can't wipe that partition...?
es0tericcha0s said:
Sorry about the OTA zip, I didn't read it closely enough for the install instructions. I don't know why you think the system is gone seeing as how the stock recovery can't wipe that partition...?
Click to expand...
Click to collapse
i'm lost
Mash volume up and down and power when in recovery.
The options are there (I know as I have the same tab) but I can't remember the combination
You can try and sideload the zip via recovery (I couldn't get ghat to work, got the same error)
Factory Reset from the Asus Manual
Backup and Reset
Back up data, Wi-fi passwords,and other Google servers using your Asus Tablet.
To do this:
1. Go to Settings>Backup and reset
2. From the Backup and reset window, you can:
Factory data reset: Erases all data on the tablet
Press both volume buttons to access recovery commands, find reboot with volume keys, press power to select. Done
Power lead out, Power down, hold volume down and power on, release power on when "In search of the incredible" screen shows, use volume button to select "Recovery Mode".
When Android with open stomach shows and "No Command" press and hold volume up and power button for 3 - 5 seconds then use volume button to scroll to wipe cache / wipe data use power until to select.
If it doesn't work try again until it does.
---------- Post added at 04:39 PM ---------- Previous post was at 04:37 PM ----------
Power lead out, Power down, hold volume down and power on, release power on when "In search of the incredible" screen shows, use volume button to select "Recovery Mode".
When Android with open stomach shows and "No Command" press and hold volume up and power button for 3 - 5 seconds then use volume button to scroll to wipe cache / wipe data use power until to select.
If it doesn't work try again until it does.

Can't enter recovery on Archos Platinum 50c

My brother fergot his password and therefore I need to factory reset the device using the recovery.
However, Volume up+ Power doesnt work for me, screen just goes black for a few seconds and it boots normally.
Anyone facing this issue too?
I have the Platinum 55d but...
I had trouble getting into recovery mode myself and this might help you.
Press and hold the power button and shortly thereafter press and hold the volume up button. Wait for the brand to load up and let go of the power button.
Wait for the android to show up. If it doesn't and the phone starts up normally, take out the battery and try again.
Once the android shows up hold the power button and tap the volume up button.
Same problem
I have the same problem
i start phone and try every way to get into recovery but cant get it on
did you find a fix?
me too! pls help!!
Thinking you can flash it with Sp-flashtool or http://www.mediafire.com/file/cgy6j622oq4lv7n/FACTORYDOWNLOAD_R2.9.9015.zip + driver
Offical firmware link etc. https://forum.xda-developers.com/android/help/archos-50c-platinum-archos-50cpl-twrp-2-t3594137
Btw sometimes it hard to boot into recovery so i use xposed to do that.

Categories

Resources