[broken ace] i updated with odin without root - Galaxy Ace S5830 General

hi guys i forgot to root my phone before using odin..now i updated to 2.3 but the phone doesn't turn on..!! is what can i do?

What do you mean? You don't need to root to update through Odin. You just need to set it to download mode and follow instructions.

ok i followed all but noticed that the package S5830JPKP9 contains only 3 files 1.APBOOT_S5830JPKP9_CL457554_REV03_user_low_true.tar i used for boot
2.CODE_S5830JPKP9_CL457554_REV03_user_low_true.tar i used for pda
3.GT-S5830-MULTI-CSC-OJPKP3.tar i used for phone
is that ok?

3.GT-S5830-MULTI-CSC-OJPKP3.tar i used for phone
Click to expand...
Click to collapse
MODEM for phone
CSC for CSC

no modem i the package..how can i get it?

Choose 1 in this thread:
http://forum.xda-developers.com/showthread.php?t=1289830&highlight=collection
Click to expand...
Click to collapse

thanks i also found this MODEM S5830XWKP7 CL407346 REV03.tar.md5 on mediafire http://www.mediafire.com/?4l6ib7wl4a7kkhd i'll try it and post back

it worked...i flashed it and phone is working right now thanks

Related

[Q] Root went rong LPH

Hi Guys,
bought a cheap S2 of ebay which had a Orange lock on it. I decided to root it to remove the lock. When I got it kernel version was L9100BVLPD. Then updated it via Kies2 to L9100BVLPH. I used Odin 1.85 and this kernel CF-Root-SGS2_XX_OXA_LPH-v5.2-CWM5.zip (can post the link, but it was the chainfire one)
Installed all the drivers. In the download mode Odin said added and I followed the steps. Odin said PASS after only a few seconds. When it reboots though now, it shows the Samsung logo with a yellow triangle below, but then turns off. I can still go into download mode etc. I can´t seem to find the original kernel anywhere. Any ideas on how to fix this mess?
Thanks in advance!
Try to reflash a stockrom in download mode
Sent from my CyanogenMod 10 powered GT-I9100 using xda premium
krayndr said:
Try to reflash a stockrom in download mode
Click to expand...
Click to collapse
Thanks for your reply. I am a complete noob. How do I do that. Could you link me to a tutorial?
Just an update in case anyone has the same problem. I found the original kernel. (pm me for the link)
Since the last time didn´t work out what should I do now in order to root sucessfully?
Thanks
Backdo0r said:
Just an update in case anyone has the same problem. I found the original kernel. (pm me for the link)
Since the last time didn´t work out what should I do now in order to root sucessfully?
Thanks
Click to expand...
Click to collapse
If you just want root you can use speed mod kernels for gingerbread and Siyah kernels for ICS. But first you have to flash a stock ROM from sammobile.com
Sent from my potato running a potato.
Backdo0r said:
I can still go into download mode etc. I can´t seem to find the original kernel anywhere
Click to expand...
Click to collapse
Try sammobile - firmware or Check fus downloader here
Remember to (1) have Samsung USB drivers and (2) put kies off when using Odin and (3) read about emmc erase bug in stock 4.0.4!
If nothing works take a look here
ysrini said:
Try sammobile - firmware or Check fus downloader here
Remember to (1) have Samsung USB drivers and (2) put kies off when using Odin and (3) read about emmc erase bug in stock 4.0.4!
If nothing works take a look here
Click to expand...
Click to collapse
Thanks alot. Used an old software, before 4.0.1 of sammobile and then rooted that one. Unlocked the phone and then just updated via Kies.:good:
Might try to root it again in order to remove all the annyoing orange apps.
Thanks again

Bricked Galaxy S4 GT-I9506

***Problem Solved***
Hi experts,
My Galaxy S4 GT-I9506 is bricked with this error:
image 1 (attached)
It doesn't go to recovery mode anymore now!!!
First I tried to install custom Rom to root it with Odin, it did seem fine with "green pass" but didn't actually install any recovery mode (there wasn't any install option in recovery mode, there were only update options), nothing happened to phone at all and it worked normal.
Second i wiped the phone and cache and I download the firmware from Samsung website.
and after try to install, it failed in Odin:
Images 2 & 3 (attached)
I'm not sure but I think it was a wrong firmware, because I bought my phone online (kogan.com i think it is in Hongkong) and I downloaded the Australia Vodafone firmware (as I'm using Vodafone sim card).
anyone can help me?!
I should mention that phone doesn't go to recovery mode, failed in Odin, Kies can not fix it! the drivers all are up to date and no Antivirus runs in my PC.
Please someone help me.
Thanks & regards
Tesius
Go to samfirmware.com and download the latest firmware for your phone, try using that in odin
johndroid1999 said:
Open Kies and go to the Tools menu and click on Firmware initialization, enter your model name and serial number(under the battery). It will get you back to stock firmware
Click to expand...
Click to collapse
Kies can not fix it!
Tesius said:
Kies can not fix it!
Click to expand...
Click to collapse
Try samfirmware.com and odin then.
johndroid1999 said:
Try samfirmware.com and odin then.
Click to expand...
Click to collapse
did u really read my post?
failed in odin, kies can not support the device, no recovery mode...
Make sure your firmware downloaded right, because it is saying it is corrupt. (redownload and rerun Odin).
Tesius said:
did u really read my post?
failed in odin, kies can not support the device, no recovery mode...
Click to expand...
Click to collapse
i think your rom is currupted or half downloaded
redownload the rom from sammobile com and reflash the rom
Vaibhav Chauhan said:
i think your rom is currupted or half downloaded
redownload the rom from sammobile com and reflash the rom
Click to expand...
Click to collapse
Did you find any solution since?
I am facing the same issues and despite trying a few things, I am still stuck...
stephaned said:
Did you find any solution since?
I am facing the same issues and despite trying a few things, I am still stuck...
Click to expand...
Click to collapse
have you try to re download the rom?
stephaned said:
Did you find any solution since?
I am facing the same issues and despite trying a few things, I am still stuck...
Click to expand...
Click to collapse
The ROM was wrong, it was hard to find out which country my phone came from but i did need to use the ROM for the country the phone comes from...
Tesius said:
The ROM was wrong, it was hard to find out which country my phone came from but i did need to use the ROM for the country the phone comes from...
Click to expand...
Click to collapse
Tks - I have tried many ROMs from different counties (other ROM or even Kernel, etc...) and upload does not seem to work in ODIN. When you find the right country ROM, did it suddenly work in ODIN?
stephaned said:
Tks - I have tried many ROMs from different counties (other ROM or even Kernel, etc...) and upload does not seem to work in ODIN. When you find the right country ROM, did it suddenly work in ODIN?
Click to expand...
Click to collapse
yes, there are different operator in one country, first u have to find out in which operator of which country your phone is supported, then download the ROM from sammobile, make sure of using last version of Odin, and maybe it takes longer than u expects, for me last about 9min to get the Pass sign...
i had the same problem..so try downloading GT-I9506_501_Stock-Recovery_XXUDOF2 that file from internet and extract..and then flash it using odin..it worked for my s4 gti 9506...

[HOW TO] 100% working Oreo Update SM-950F[ Unrooted]

The Update now is on SamFirm so no need to do those steps anymore!!!
Now i got it to work and its easyer than in some other Faq:
1. Download the French XEF:
https://mega.nz/#!CuZ0ADZK!D9cm15gCz3XyRgpCX8tCArgXQ4iGFQN6rFO9GGqiHrc
2. Download the Combo FW:
https://mega.nz/#!LnplQYTC!vO1O85WPKeKSJVQjqm4-_PIc55xwqx0j9w_55ZB6SXQ
Download the Odin for Combo (Mod)
http://www103.zippyshare.com/v/VAxBDzSe/file.html
Factory Reset your Note 8
Now bring your Phone into Download Mode (Vol down, Bixby button and Power) and flash the XEF Firmware including CSC not Home CSC
Take out the Sim and SD Card and do the initial Setup without Wifi/Cell
Factory Reset the Note again and flash the Combo File as AP and the Home CSC from the French FW use the Odin Combo version (MOD) from the download above..
After your Note booted into the Combo FW go to IME and type: *#243203855#
Change to XEF the Phone reboots and now you are on XFE you can check it if you take the last step and see that you on XEF
Power Off the Note and bring it into Download Mode again and Flash the XEF Firmware use the CSC not CSC Home
Now you are on XEF and you can connect to wifi and install Oreo!!!
Have Fun..
No need for OEM Unlock or Developer Options..
Pls if someone votes that it didnt work, let us know what the Problem is/was to help others. If you follow the instructions it should work 100% i tested this on 5 different Note 8
Still someone will upload update.zip when it downloads it before installing it? Please...
ivan_vylka said:
Still someone will upload update.zip when it downloads it before installing it? Please...
Click to expand...
Click to collapse
You have to be rooted for that and mostly rooted means no ota its not hard to do if you follow the instructions. I was trying countless hours and found the easiest way as described in this faq
Hey mate, since you are not from France, is OEM Unlock available after switching to XEF for you, assuming you are not whatsoever tied with France (SIM, physically there)?
PlutoDelic said:
Hey mate, since you are not from France, is OEM Unlock available after switching to XEF for you, assuming you have no whatsoever tied with France (SIM, physically there)?
Click to expand...
Click to collapse
It should be there for me it isn't because I flashed about 30 times or more and now I have to wait for it to come back. But it should work for you if you still see it on your 7 rom.
I was on DBT Germany and no French sim needed
cebulank said:
You have to be rooted for that and mostly rooted means no ota its not hard to do if you follow the instructions. I was trying countless hours and found the easiest way as described in this faq
Click to expand...
Click to collapse
I think that update.zip should be installed over stock recovery without root on BRB2 firmware.
ivan_vylka said:
I think that update.zip should be installed over stock recovery without root on BRB2 firmware.
Click to expand...
Click to collapse
I don't get what you mean there is no update.zip available
Do the trick with XEF CSC and download Oreo update. Skip installation for later. Browse in internal memory and you should see update.zip. Copy that zip and share it. Everyone with BRB2 firmware, but not XEF CSC will be able to put that zip in internal memory and install it over stock recovery manually.
ivan_vylka said:
Do the trick with XEF CSC and download Oreo update. Skip installation for later. Browse in internal memory and you should see update.zip. Copy that zip and share it. Everyone with BRB2 firmware, but not XEF CSC will be able to put that zip in internal memory and install it over stock recovery manually.
Click to expand...
Click to collapse
For me it's too late im on 8.0 already
cebulank said:
Now i got it to work and its easyer than in some other Faq:
1. Download the French XEF:
https://updato.com/firmware-archive-select-model?record=67BFD0E620FF11E89F15FA163EE8F90B
2. Download the Combo FW:
https://androidfilehost.com/?fid=746010030569959412
Factory Reset your Note 8
Now bring your Phone into Download Mode (Vol down, Bixby button and Power) and flash the XEF Firmware including CSC not Home CSC
Take out the Sim and SD Card and do the initial Setup without Wifi/Cell
Factory Reset the Note again and flash the Combo File as AP and the CSC from the French FW
After your Note booted into the Combo FW go to IME and type: *#243203855#
Change to XFE the Phone reboots and now you are on XFE you can check it if you take the last step and see that you on XFE
Power Off the Note and bring it into Download Mode again and Flash the XFE Firmware use the CSC not CSC Home
Now you are on XFE and you can connect to wifi and install Oreo!!!
Have Fun..
No need for OEM Unlock or Developer Options..
Click to expand...
Click to collapse
Are you sure the combi file is ok? I downloaded twice and when I open the file it says corrupt.
pietrucci said:
Are you sure the combi file is ok? I downloaded twice and when I open the file it says corrupt.
Click to expand...
Click to collapse
I upload mine on mega and change the links will take about 20 minutes
Yeah same here , flashed XEF was trying to flash combo version but it seems to get stuck at nad_stream.bin .
Waiting for Mega upload will report back after flashing the newer upload.
fahadali2315 said:
Yeah same here , flashed XEF was trying to flash combo version but it seems to get stuck at nad_stream.bin .
Waiting for Mega upload will report back after flashing the newer upload.
Click to expand...
Click to collapse
I took the links from another source sorry didn't know that the combo is corrupt. Im already upload mine to mega and will update the links soon.
Thank you, followed the steps and got Oreo , my orignal csc was XSG/XSG/XSG and now its XEF/XEF/XSG
cebulank said:
I took the links from another source sorry didn't know that the combo is corrupt. Im already upload mine to mega and will update the links soon.
Click to expand...
Click to collapse
No issues should probably delete the links for now, so others dont fail in flashing too. cheers waiting for updated link.
fahadali2315 said:
Yeah same here , flashed XEF was trying to flash combo version but it seems to get stuck at nad_stream.bin .
Waiting for Mega upload will report back after flashing the newer upload.
Click to expand...
Click to collapse
it stuck for me too, follow the steps till you put CSC, select HOME_CSC...i followed a mix of this guide and this: https://forum.xda-developers.com/ga...tall-oreo-exynos-note-8-t3764563/post75926532 , he mentioned some steps like enabling OEM and USB Debug
also the comb file works fine, i downloaded it but first time i used CSC instead of HOME_CSC and it got stuck in odin, had to reflash xef, then comb again
Ather said:
it stuck for me too, follow the steps till you put CSC, select HOME_CSC...i followed a mix of this guide and this: https://forum.xda-developers.com/ga...tall-oreo-exynos-note-8-t3764563/post75926532 , he mentioned some steps like enabling OEM and USB Debug
also the comb file works fine, i downloaded it but first time i used CSC instead of HOME_CSC and it got stuck in odin, had to reflash xef, then comb again
Click to expand...
Click to collapse
Thx i changed that in the description also i added a download link for Odin Mod for Combi files, for PPL that have problems with ODIN
You dont need to have OEM Unlock or Developer Options aktivated...
Is the combo file the same one that SamFirm would download as Binary (multiple files fw)?
PlutoDelic said:
Is the combo file the same one that SamFirm would download as Binary (multiple files fw)?
Click to expand...
Click to collapse
no, this is a factory fw used by samsung engineers to diagnose devices
PlutoDelic said:
Is the combo file the same one that SamFirm would download as Binary (multiple files fw)?
Click to expand...
Click to collapse
Its one File COMBINATION_FA71_N950FXXU3ARA5_CL12991683_QB16751804_REV00_user_mid_noship.tar.md5 that you have to flash as AP

Cant update my s7 edge , says device is upto date , Please help !

So my dad got this new s7 edge for me. i used it for 1 day or so and realised that the android version is till on 6.0.1 . i tried to update the device manually but it says that its up-to-date, but im sure enough that its not. i also tried the smart switch method from Pc , but there is now update option in the smartswitch software as if the device is upto date.
I downloaded a root checker app to see if the device has been rooted or not , but the app shows that there are no signs for rooting. Can someone please help me with this, im tired of trying.
Saad Mansuri said:
So my dad got this new s7 edge for me. i used it for 1 day or so and realised that the android version is till on 6.0.1 . i tried to update the device manually but it says that its up-to-date, but im sure enough that its not. i also tried the smart switch method from Pc , but there is now update option in the smartswitch software as if the device is upto date.
I downloaded a root checker app to see if the device has been rooted or not , but the app shows that there are no signs for rooting. Can someone please help me with this, im tired of trying.
Click to expand...
Click to collapse
You should be able to download a 7.0 Nougat Firmware for your Exact Model and then flash it via Odin.
Fatal_Scythe said:
You should be able to download a 7.0 Nougat Firmware for your Exact Model and then flash it via Odin.
Click to expand...
Click to collapse
Oh.. but i am a noob and dont know much about all these stuff can u provide me a link which contains thr proper instructions ?
Saad Mansuri said:
Oh.. but i am a noob and dont know much about all these stuff can u provide me a link which contains thr proper instructions ?
Click to expand...
Click to collapse
Yes sure. Give me some time to look up the Files you need. What's your Model Nr.?
Fatal_Scythe said:
Yes sure. Give me some time to look up the Files you need. What's your Model Nr.?
Click to expand...
Click to collapse
Model no. SM-G935T
Saad Mansuri said:
Model no. SM-G935T
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935T/TMB/download/G935TUVS4BRC1/215301
If I'm not wrong you have the S7 Edge from USA T-Mobile Carrier. This Link has the latest Android 7.0 Nougat Update (Build 12.04.2018) for the S7 Edge [USA T-Mobile].
Okay, once you downloaded the Firmware, you have to extract it. You should get an .tar or .tar.md5 file then.
Now you need to Download the Flashtool for Samsung Devices called "Odin"
Link: https://odin3.en.lo4d.com/download
This File contains the Latest Odin Tool Version 3.13.1
Send me Message again once both Downloads are finished and you extracted the Firmware so I can tell you the final steps to flash your Device
Fatal_Scythe said:
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935T/TMB/download/G935TUVS4BRC1/215301
If I'm not wrong you have the S7 Edge from USA T-Mobile Carrier. This Link has the latest Android 7.0 Nougat Update (Build 12.04.2018) for the S7 Edge [USA T-Mobile].
Okay, once you downloaded the Firmware, you have to extract it. You should get an .tar or .tar.md5 file then.
Now you need to Download the Flashtool for Samsung Devices called "Odin"
Link: https://odin3.en.lo4d.com/download
This File contains the Latest Odin Tool Version 3.13.1
Send me Message again once both Downloads are finished and you extracted the Firmware so I can tell you the final steps to flash your Device
Click to expand...
Click to collapse
sure!
Fatal_Scythe said:
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935T/TMB/download/G935TUVS4BRC1/215301
If I'm not wrong you have the S7 Edge from USA T-Mobile Carrier. This Link has the latest Android 7.0 Nougat Update (Build 12.04.2018) for the S7 Edge [USA T-Mobile].
Okay, once you downloaded the Firmware, you have to extract it. You should get an .tar or .tar.md5 file then.
Now you need to Download the Flashtool for Samsung Devices called "Odin"
Link: https://odin3.en.lo4d.com/download
This File contains the Latest Odin Tool Version 3.13.1
Send me Message again once both Downloads are finished and you extracted the Firmware so I can tell you the final steps to flash your Device
Click to expand...
Click to collapse
Alright , finally done downloading both of them and extracted that firmware file
Saad Mansuri said:
Alright , finally done downloading both of them and extracted that firmware file
Click to expand...
Click to collapse
Good. One Question first: is the Firmware a single .tar File? If yes, then start Odin, select AP and select the Extracted Firmware File.
After that (Backup all your Important Data first before proceeding!) you have to put your Phone into the Download Mode, Power it off, wait a few Seconds, and then press and hold Volume Down Button and Home Button and after that press and hold the Power Button. If you get a Blue Screen displaying a Warning, everything is good and you can enter the Download Mode by pressing Volume Up Button another Time. Then Connect it to your PC and wait for Odin to say "Added!" after that simply hit Start to Flash.
Fatal_Scythe said:
You should be able to download a 7.0 Nougat Firmware for your Exact Model and then flash it via Odin.
Click to expand...
Click to collapse
Fatal_Scythe said:
Good. One Question first: is the Firmware a single .tar File? If yes, then start Odin, select AP and select the Extracted Firmware File.
After that (Backup all your Important Data first before proceeding!) you have to put your Phone into the Download Mode, Power it off, wait a few Seconds, and then press and hold Volume Down Button and Home Button and after that press and hold the Power Button. If you get a Blue Screen displaying a Warning, everything is good and you can enter the Download Mode by pressing Volume Up Button another Time. Then Connect it to your PC and wait for Odin to say "Added!" after that simply hit Start to Flash.
Click to expand...
Click to collapse
Oh understood , But there are 5 files. And i have a question or 2 to ask , if the usb connection gets interrupted will it do any bad to my phone ? And how much time.will it take to complete ?
Saad Mansuri said:
Oh understood , But there are 5 files. And i have a question or 2 to ask , if the usb connection gets interrupted will it do any bad to my phone ? And how much time.will it take to complete ?
Click to expand...
Click to collapse
Answer 1: If it gets interrupted while flash, it normally shouldn't do any damage. It would be then called a Soft-Brick and you would have to flash it again.
Answer 2: Depends on what File Size the Firmware has. But normally it shouldn't take more than 5-10 Minutes.
If I understood right, you have 5 Files.
Do they (kinda) look like this or have such letters in it?
- BL ...
- AP ...
- CP ...
- CSC ...
- USERDATA ...
If yes, then you just have to put the files to the correct Tab. Like BL ... to the BL tab and CSC to the CSC Tab.
Fatal_Scythe said:
Answer 1: If it gets interrupted while flash, it normally shouldn't do any damage. It would be then called a Soft-Brick and you would have to flash it again.
Answer 2: Depends on what File Size the Firmware has. But normally it shouldn't take more than 5-10 Minutes.
If I understood right, you have 5 Files.
Do they (kinda) look like this or have such letters in it?
- BL ...
- AP ...
- CP ...
- CSC ...
- USERDATA ...
If yes, then you just have to put the files to the correct Tab. Like BL ... to the BL tab and CSC to the CSC Tab.
Click to expand...
Click to collapse
yep thats correct , 4 of them u mentioned are present but instead of USERDATA , there's HOME_CSC_TMB.
If thats not a problem , i must start the process
Saad Mansuri said:
yep thats correct , 4 of them u mentioned are present but instead of USERDATA , there's HOME_CSC_TMB.
If thats not a problem , i must start the process
Click to expand...
Click to collapse
A HOME_CSC File is no Problem either.
Good Luck!
Fatal_Scythe said:
A HOME_CSC File is no Problem either.
Good Luck!
Click to expand...
Click to collapse
Finally i got some time for flashing the ROM.
I did exactly as u told me too.. and guess what, it WORKED !!!
Im using 7.0 right now and its amazing i cant thank you enough bro..
Someone give this man a medal ?
Saad Mansuri said:
Finally i got some time for flashing the ROM.
I did exactly as u told me too.. and guess what, it WORKED !!!
Im using 7.0 right now and its amazing i cant thank you enough bro..
Someone give this man a medal
Click to expand...
Click to collapse
That's great! -> Check your PN: I'm sure you're gonna enjoy your Device on 8.0 even more hehe
Greetings^^

Galaxy J6 stuck at logo bootloop after "rooting"

Hello there!
I installed TWRP recovery mode on my phone in order to root it, I watched a very goog tutorial (
) on how to do it. After installing Magisk, my Galaxy J6 is stuck at logo bootloop, I uninstalled Magisk but it did not help. I tried to wipe data, format and everything from TWRP, but it did not work.
How do I fix my phone??
mahaci7363 said:
Hello there!
I installed TWRP recovery mode on my phone in order to root it, I watched a very goog tutorial (
) on how to do it. After installing Magisk, my Galaxy J6 is stuck at logo bootloop, I uninstalled Magisk but it did not help. I tried to wipe data, format and everything from TWRP, but it did not work.
How do I fix my phone??
Click to expand...
Click to collapse
You can access download mode?
Then I recommend to restart from scratch by using Odin to flash latest Stock ROM (get it via samfirm_reborn).
bmwdroid said:
You can access download mode?
Then I recommend to restart from scratch by using Odin to flash latest Stock ROM (get it via samfirm_reborn).
Click to expand...
Click to collapse
Yes I can access it. What would the Stock ROM do for the phone? I am just curious and don't want to mess my phone anymore
mahaci7363 said:
Yes I can access it. What would the Stock ROM do for the phone? I am just curious and don't want to mess my phone anymore
Click to expand...
Click to collapse
It will be like you can buy it in a store.
Stock ROM = Samsungs firmware
bmwdroid said:
It will be like you can buy it in a store.
Stock ROM = Samsungs firmware
Click to expand...
Click to collapse
Now I see, do you think it will work after wiping data using TWRP recovery?? USB-debugging was turned on before the reset, do you think it turned off?
bmwdroid said:
You can access download mode?
Then I recommend to restart from scratch by using Odin to flash latest Stock ROM (get it via samfirm_reborn).
Click to expand...
Click to collapse
samfirm_reborn? Do you have a link?
mahaci7363 said:
Now I see, do you think it will work after wiping data using TWRP recovery?? USB-debugging was turned on before the reset, do you think it turned off?
Click to expand...
Click to collapse
Don't understand your question.
You wrote you've wiped already and it didn't help.
In download mode USB-debugging doesn't work anyway.
As system is wiped it can't work imo.
GitHub - ivanmeler/SamFirm_Reborn
Contribute to ivanmeler/SamFirm_Reborn development by creating an account on GitHub.
github.com
bmwdroid said:
Don't understand your question.
You wrote you've wiped already and it didn't help.
In download mode USB-debugging doesn't work anyway.
As system is wiped it can't work imo.
GitHub - ivanmeler/SamFirm_Reborn
Contribute to ivanmeler/SamFirm_Reborn development by creating an account on GitHub.
github.com
Click to expand...
Click to collapse
Thank you for the link, but there is no file with the name Stock ROM or firmware or something like that. How am I supposed to download the Stock ROM to my laptop??
Please bear with me, I know I am aksing to much
@mahaci7363 use samfirm to download stock ROM from Samsungs servers.
Check "binary nature"
Unzip the file you'll get into 4 o 5 different files (AP, BL, CSC aso)
Start Odin and insert the files appropriately.
bmwdroid said:
@mahaci7363 use samfirm to download stock ROM from Samsungs servers.
Check "binary nature"
Unzip the file you'll get into 4 o 5 different files (AP, BL, CSC aso)
Start Odin and insert the files appropriately.
Click to expand...
Click to collapse
@bmwdroid Thank you so much! Then all I have to do is start Odin and wait for the installation (I believe I should be in download mode). Can I use Sammobile? (Found a firmware for Nordic countries - this is where I live) In Samfirms I did not find a version for Nordic countries.
I really appreciate your help! Thanks mate!
mahaci7363 said:
@bmwdroid Thank you so much! Then all I have to do is start Odin and wait for the installation (I believe I should be in download mode). Can I use Sammobile? (Found a firmware for Nordic countries - this is where I live) In Samfirms I did not find a version for Nordic countries.
I really appreciate your help! Thanks mate!
Click to expand...
Click to collapse
Download mode is necessary for using Odin.
Sammobile can be used as well, but sometimes it only gives you a one part file which might not help as much as the multiple part files you'd get using samfirm.
Which region code did you try there? NEE?
How to Find Your Samsung Galaxy CSC Region Code? - KrispiTech
CSC stands for Country Specific Code. It is needed to download firmware for Samsung Galaxy smartphones and we can find out what ours is in
krispitech.com
Device type SM-J600F ?
Never happened for my eight devices that samfirm didn't find the stock ROM.
One part file has to be put in AP on Odin.
@mahaci7363 you seem to be right.
Just tried myself and with J600F I couldn't find any.
That's peculiar.
So you have to rely on sammobile.
bmwdroid said:
@mahaci7363 you seem to be right.
Just tried myself and with J600F I couldn't find any.
That's peculiar.
So you have to rely on sammobile.
Click to expand...
Click to collapse
gotta be SM-J600FN plus NEE!
then it is found
bmwdroid said:
Download mode is necessary for using Odin.
Sammobile can be used as well, but sometimes it only gives you a one part file which might not help as much as the multiple part files you'd get using samfirm.
Which region code did you try there? NEE?
How to Find Your Samsung Galaxy CSC Region Code? - KrispiTech
CSC stands for Country Specific Code. It is needed to download firmware for Samsung Galaxy smartphones and we can find out what ours is in
krispitech.com
Device type SM-J600F ?
Never happened for my eight devices that samfirm didn't find the stock ROM.
One part file has to be put in AP on Odin.
Click to expand...
Click to collapse
My device type is SM-J600FN, but it is okay, I can download the SM-J600F version.
Isn't CSC the same as the build number?? In that case, I copied it before damaging my phone: J600FXXUACVC2.
I found a firmware version for J600FXXUACVC2 but its region is Iraq, which is really strange, since I live in Sweden and bought the phone from Sweden. Unfortunately I did not manage to find the CSC code, in downloading mode I don't see information about my device, I only see this: (check the image).
Can't I just choose the version Nordic countries or is it going to damage my phone more?? In that case, I can download the Iraq version which has the same build number as my J6
https://www.sammobile.com/samsung/galaxy-j6/firmware/SM-J600F/MID/download/J600FXXUACVC2/1626184/ (Iraq version)
https://www.sammobile.com/samsung/galaxy-j6/firmware/SM-J600FN/NEE/download/J600FNXXUACVC2/1627241/ (Nordic Countries version)
Edit: I did not see your comments before this comment, thanks for the help @bmwdroid ! I really appreciate it!
@bmwdroid the downloading instructions on sammobile:
Add the firmware files to their designated slots (AP in AP, BL in BL,
CP in CP, HOME_CSC in CSC). Do not tick any extra boxes. The only
options to be ticked are F. Reset Time and Auto-Reboot.
What is meant with the option F? I don't find any options in Odin.
Edit: I found it
mahaci7363 said:
@bmwdroid the downloading instructions on sammobile:
Add the firmware files to their designated slots (AP in AP, BL in BL,
CP in CP, HOME_CSC in CSC). Do not tick any extra boxes. The only
options to be ticked are F. Reset Time and Auto-Reboot.
What is meant with the option F? I don't find any options in Odin.
Edit: I found it
Click to expand...
Click to collapse
You are my life saver,i have done like you and its not my phone (my friends phone),5 minute i think that i brick his samsung,but with this you are lifesaver,thx very much bro you are crazy!!!

Categories

Resources