The Update now is on SamFirm so no need to do those steps anymore!!!
Now i got it to work and its easyer than in some other Faq:
1. Download the French XEF:
https://mega.nz/#!CuZ0ADZK!D9cm15gCz3XyRgpCX8tCArgXQ4iGFQN6rFO9GGqiHrc
2. Download the Combo FW:
https://mega.nz/#!LnplQYTC!vO1O85WPKeKSJVQjqm4-_PIc55xwqx0j9w_55ZB6SXQ
Download the Odin for Combo (Mod)
http://www103.zippyshare.com/v/VAxBDzSe/file.html
Factory Reset your Note 8
Now bring your Phone into Download Mode (Vol down, Bixby button and Power) and flash the XEF Firmware including CSC not Home CSC
Take out the Sim and SD Card and do the initial Setup without Wifi/Cell
Factory Reset the Note again and flash the Combo File as AP and the Home CSC from the French FW use the Odin Combo version (MOD) from the download above..
After your Note booted into the Combo FW go to IME and type: *#243203855#
Change to XEF the Phone reboots and now you are on XFE you can check it if you take the last step and see that you on XEF
Power Off the Note and bring it into Download Mode again and Flash the XEF Firmware use the CSC not CSC Home
Now you are on XEF and you can connect to wifi and install Oreo!!!
Have Fun..
No need for OEM Unlock or Developer Options..
Pls if someone votes that it didnt work, let us know what the Problem is/was to help others. If you follow the instructions it should work 100% i tested this on 5 different Note 8
Still someone will upload update.zip when it downloads it before installing it? Please...
ivan_vylka said:
Still someone will upload update.zip when it downloads it before installing it? Please...
Click to expand...
Click to collapse
You have to be rooted for that and mostly rooted means no ota its not hard to do if you follow the instructions. I was trying countless hours and found the easiest way as described in this faq
Hey mate, since you are not from France, is OEM Unlock available after switching to XEF for you, assuming you are not whatsoever tied with France (SIM, physically there)?
PlutoDelic said:
Hey mate, since you are not from France, is OEM Unlock available after switching to XEF for you, assuming you have no whatsoever tied with France (SIM, physically there)?
Click to expand...
Click to collapse
It should be there for me it isn't because I flashed about 30 times or more and now I have to wait for it to come back. But it should work for you if you still see it on your 7 rom.
I was on DBT Germany and no French sim needed
cebulank said:
You have to be rooted for that and mostly rooted means no ota its not hard to do if you follow the instructions. I was trying countless hours and found the easiest way as described in this faq
Click to expand...
Click to collapse
I think that update.zip should be installed over stock recovery without root on BRB2 firmware.
ivan_vylka said:
I think that update.zip should be installed over stock recovery without root on BRB2 firmware.
Click to expand...
Click to collapse
I don't get what you mean there is no update.zip available
Do the trick with XEF CSC and download Oreo update. Skip installation for later. Browse in internal memory and you should see update.zip. Copy that zip and share it. Everyone with BRB2 firmware, but not XEF CSC will be able to put that zip in internal memory and install it over stock recovery manually.
ivan_vylka said:
Do the trick with XEF CSC and download Oreo update. Skip installation for later. Browse in internal memory and you should see update.zip. Copy that zip and share it. Everyone with BRB2 firmware, but not XEF CSC will be able to put that zip in internal memory and install it over stock recovery manually.
Click to expand...
Click to collapse
For me it's too late im on 8.0 already
cebulank said:
Now i got it to work and its easyer than in some other Faq:
1. Download the French XEF:
https://updato.com/firmware-archive-select-model?record=67BFD0E620FF11E89F15FA163EE8F90B
2. Download the Combo FW:
https://androidfilehost.com/?fid=746010030569959412
Factory Reset your Note 8
Now bring your Phone into Download Mode (Vol down, Bixby button and Power) and flash the XEF Firmware including CSC not Home CSC
Take out the Sim and SD Card and do the initial Setup without Wifi/Cell
Factory Reset the Note again and flash the Combo File as AP and the CSC from the French FW
After your Note booted into the Combo FW go to IME and type: *#243203855#
Change to XFE the Phone reboots and now you are on XFE you can check it if you take the last step and see that you on XFE
Power Off the Note and bring it into Download Mode again and Flash the XFE Firmware use the CSC not CSC Home
Now you are on XFE and you can connect to wifi and install Oreo!!!
Have Fun..
No need for OEM Unlock or Developer Options..
Click to expand...
Click to collapse
Are you sure the combi file is ok? I downloaded twice and when I open the file it says corrupt.
pietrucci said:
Are you sure the combi file is ok? I downloaded twice and when I open the file it says corrupt.
Click to expand...
Click to collapse
I upload mine on mega and change the links will take about 20 minutes
Yeah same here , flashed XEF was trying to flash combo version but it seems to get stuck at nad_stream.bin .
Waiting for Mega upload will report back after flashing the newer upload.
fahadali2315 said:
Yeah same here , flashed XEF was trying to flash combo version but it seems to get stuck at nad_stream.bin .
Waiting for Mega upload will report back after flashing the newer upload.
Click to expand...
Click to collapse
I took the links from another source sorry didn't know that the combo is corrupt. Im already upload mine to mega and will update the links soon.
Thank you, followed the steps and got Oreo , my orignal csc was XSG/XSG/XSG and now its XEF/XEF/XSG
cebulank said:
I took the links from another source sorry didn't know that the combo is corrupt. Im already upload mine to mega and will update the links soon.
Click to expand...
Click to collapse
No issues should probably delete the links for now, so others dont fail in flashing too. cheers waiting for updated link.
fahadali2315 said:
Yeah same here , flashed XEF was trying to flash combo version but it seems to get stuck at nad_stream.bin .
Waiting for Mega upload will report back after flashing the newer upload.
Click to expand...
Click to collapse
it stuck for me too, follow the steps till you put CSC, select HOME_CSC...i followed a mix of this guide and this: https://forum.xda-developers.com/ga...tall-oreo-exynos-note-8-t3764563/post75926532 , he mentioned some steps like enabling OEM and USB Debug
also the comb file works fine, i downloaded it but first time i used CSC instead of HOME_CSC and it got stuck in odin, had to reflash xef, then comb again
Ather said:
it stuck for me too, follow the steps till you put CSC, select HOME_CSC...i followed a mix of this guide and this: https://forum.xda-developers.com/ga...tall-oreo-exynos-note-8-t3764563/post75926532 , he mentioned some steps like enabling OEM and USB Debug
also the comb file works fine, i downloaded it but first time i used CSC instead of HOME_CSC and it got stuck in odin, had to reflash xef, then comb again
Click to expand...
Click to collapse
Thx i changed that in the description also i added a download link for Odin Mod for Combi files, for PPL that have problems with ODIN
You dont need to have OEM Unlock or Developer Options aktivated...
Is the combo file the same one that SamFirm would download as Binary (multiple files fw)?
PlutoDelic said:
Is the combo file the same one that SamFirm would download as Binary (multiple files fw)?
Click to expand...
Click to collapse
no, this is a factory fw used by samsung engineers to diagnose devices
PlutoDelic said:
Is the combo file the same one that SamFirm would download as Binary (multiple files fw)?
Click to expand...
Click to collapse
Its one File COMBINATION_FA71_N950FXXU3ARA5_CL12991683_QB16751804_REV00_user_mid_noship.tar.md5 that you have to flash as AP
Related
hi guys i forgot to root my phone before using odin..now i updated to 2.3 but the phone doesn't turn on..!! is what can i do?
What do you mean? You don't need to root to update through Odin. You just need to set it to download mode and follow instructions.
ok i followed all but noticed that the package S5830JPKP9 contains only 3 files 1.APBOOT_S5830JPKP9_CL457554_REV03_user_low_true.tar i used for boot
2.CODE_S5830JPKP9_CL457554_REV03_user_low_true.tar i used for pda
3.GT-S5830-MULTI-CSC-OJPKP3.tar i used for phone
is that ok?
3.GT-S5830-MULTI-CSC-OJPKP3.tar i used for phone
Click to expand...
Click to collapse
MODEM for phone
CSC for CSC
no modem i the package..how can i get it?
Choose 1 in this thread:
http://forum.xda-developers.com/showthread.php?t=1289830&highlight=collection
Click to expand...
Click to collapse
thanks i also found this MODEM S5830XWKP7 CL407346 REV03.tar.md5 on mediafire http://www.mediafire.com/?4l6ib7wl4a7kkhd i'll try it and post back
it worked...i flashed it and phone is working right now thanks
Am I hard bricked?
I accidently tried flashing the wrong rom onto my phone.
Now it says to use samsung emergency recovery, which doesnt work.
I lost the paper that had all the info about my phone on it..
Ive tried using ODIN to flash multiple different stock roms for the g925a and it always says FAIL.
Ive tried not flashing the boot loader.
Ive tried using the appropriate PIT
Tried different cables and usb ports as well.
edit: the phone was encrypted and had the reactivation lock on as well
Thanks for any replies
Hello,
Where can you boot ? Normal - Download - Recovery
Which PIT file have you flashed to your device ?
What was the ROM you flashed on your device ?
Where does Odin fails while flashing ?
iDroid27210 said:
Hello,
Where can you boot ? Normal - Download - Recovery
Which PIT file have you flashed to your device ?
What was the ROM you flashed on your device ?
Where does Odin fails while flashing ?
Click to expand...
Click to collapse
ODIN mode only
ZEROLTE_USA_ATT - Tried with, and without
OE2, OF3, OCE, OJ9,BOI2 stock i have tried them all to no avail
Sadly I dont know what ROM was originally on the phone, I lost that paper with the info..
Odin will fail at different files, like sboot and others. Ive tried flashing with BL and without.
Thank you
c19o said:
ODIN mode only
ZEROLTE_USA_ATT - Tried with, and without
OE2, OF3, OCE, OJ9,BOI2 stock i have tried them all to no avail
Sadly I dont know what ROM was originally on the phone, I lost that paper with the info..
Odin will fail at different files, like sboot and others. Ive tried flashing with BL and without.
Thank you
Click to expand...
Click to collapse
Oh, you have got the phone like that?
Mm... Use SamFirm to download a full-wipe firmware (binary nature ticked).
Flash firmware with your PIT with Repart and Nand Erase All ticked in Odin
iDroid27210 said:
Oh, you have got the phone like that?
Mm... Use SamFirm to download a full-wipe firmware (binary nature ticked).
Flash firmware with your PIT with Repart and Nand Erase All ticked in Odin
Click to expand...
Click to collapse
I tried flashing all of those stock firmwares above after it bricked and none seem to work.
Your program says "could not fetch info"
Im guessing I just havent got the right firmware to flash and I dont know what to use because I lost that paper with all the phones info.
What's your model and country ?
Have you put infos about device on SamFirm ?
iDroid27210 said:
What's your model and country ?
Have you put infos about device on SamFirm ?
Click to expand...
Click to collapse
SM-G925A bought in the US from the carrier "ATT".
Yes I tried SamFirm, it doesnt work for me. Unless I got the country code wrong.
Oh... If you have the AT&T version there's only the AT&T version.
Put "ATT" for the region.
iDroid27210 said:
Oh... If you have the AT&T version there's only the AT&T version.
Put "ATT" for the region.
Click to expand...
Click to collapse
I am using SM-G925A and ATT.
Could not fetch info
Bump
You can boot into download mode on the phone?
Holding the volume down and power button at the same time? If so..
Use kies air, it will say that the phone is unsupported but still navigate to emergency firmware upgrade and put in the device model and S/N number located on the back of the phone or on the box, hope this works for you
Jigsaw350 said:
You can boot into download mode on the phone?
Holding the volume down and power button at the same time? If so..
Use kies air, it will say that the phone is unsupported but still navigate to emergency firmware upgrade and put in the device model and S/N number located on the back of the phone or on the box, hope this works for you
Click to expand...
Click to collapse
I appreciate the help, but Ive tried that, and Smart Switch too. Just gives me an error after entering the serial number.
My S6 edge has this weird issue where it only has 16gb interna storage after flashing the nexify custom rom. How can i fix this? Do i need to flash stock?
Thanks in advance!
jockep said:
My S6 edge has this weird issue where it only has 16gb interna storage after flashing the nexify custom rom. How can i fix this? Do i need to flash stock?
Thanks in advance!
Click to expand...
Click to collapse
Is it showing as only 16GB capacity or 16GB free memory left? Sometimes rarely flashing custom rom can mess up partitions. Flashing stock will fix this.
Stock is the way to go then i guess, thanks. Yes partition seems messed up.
jockep said:
Stock is the way to go then i guess, thanks. Yes partition seems messed up.
Click to expand...
Click to collapse
I would just flash stock. Did you do a clean install of the rom?
callumbr1 said:
I would just flash stock. Did you do a clean install of the rom?
Click to expand...
Click to collapse
Hi sorry for reviving this thread. i am having the same issue as OP and wanted to ask. i have an s6 edge plus and i rooted it to make it easier for me and wanted to go back to stock rom. so my cousin brother flashed it for me and it ended up having 16gb storage like the OP.
I was wondering is that the same thing as flashing stock or thats another thing?
I used odin3 3.12 today to flash saudi arabia version and it still shows 16gb. If its not the same thing as flashing stock rom, how do i go about doing it?
Thank you very much
shairaf said:
Hi sorry for reviving this thread. i am having the same issue as OP and wanted to ask. i have an s6 edge plus and i rooted it to make it easier for me and wanted to go back to stock rom. so my cousin brother flashed it for me and it ended up having 16gb storage like the OP.
I was wondering is that the same thing as flashing stock or thats another thing?
I used odin3 3.12 today to flash saudi arabia version and it still shows 16gb. If its not the same thing as flashing stock rom, how do i go about doing it?
Thank you very much
Click to expand...
Click to collapse
What you need to do is flash the correct pit file with the rom to repartition the device.
Whats the model of the device?
The firmware and region you want?
The android version?
Tell me these and ill link you to the correct files and info how to do it.
callumbr1 said:
What you need to do is flash the correct pit file with the rom to repartition the device.
Whats the model of the device?
The firmware and region you want?
The android version?
Tell me these and ill link you to the correct files and info how to do it.
Click to expand...
Click to collapse
Model Number = SM-G928C
Firmware = I am not sure what is firmware number, is it Baseband version (G928FXXU3BPI9) or Build Number (MMB29K.G928CXXS3BPL3).
Region = I am not entirely sure if i can install any region. this mobile was bought from saudi arabia, medina. So any suitable version should be fine?
Android version = 6.0.1
Hope i answered correctly.
Thank you very much for the help you are providing
shairaf said:
Model Number = SM-G928C
Firmware = I am not sure what is firmware number, is it Baseband version (G928FXXU3BPI9) or Build Number (MMB29K.G928CXXS3BPL3).
Region = I am not entirely sure if i can install any region. this mobile was bought from saudi arabia, medina. So any suitable version should be fine?
Android version = 6.0.1
Hope i answered correctly.
Thank you very much for the help you are providing
Click to expand...
Click to collapse
Is your phone network unlocked? Or can use any sim card?
callumbr1 said:
Is your phone network unlocked? Or can use any sim card?
Click to expand...
Click to collapse
I believe yes, since this phone was bought from Saudi, but i am able to use it in Maldives using Dhiraagu (ISP) sim card.
shairaf said:
I believe yes, since this phone was bought from Saudi, but i am able to use it in Maldives using Dhiraagu (ISP) sim card.
Click to expand...
Click to collapse
EDIT: FLASH THIS ONE
https://www.sammobile.com/firmwares/download/116752/G928CXXS3BPL3_G928COJV3BPJ1_PAK/
Along with this PIT file
https://drive.google.com/file/d/0B-YraR6_UzhUMFZRTldXd1FfczA/view?usp=drivesdk
8nsert the pit in odin in PIT. Odin options should be auto reboot checked, f reset time checked and repartition checked.
Let me know of any errors.
callumbr1 said:
Download and flash this through odin.
https://www.sammobile.com/firmwares/download/109815/G928CXXU3BPJ5_G928COJV3BPJ1_XFU/
Do you need instructions how to flash?
Click to expand...
Click to collapse
Wow thanks, only difference im seeing is that i used the latest update one for saudi and it does not say (STC). is that the reason?
No, i kind of learned by watching sammobile youtube guide. so i can do it
Thank you once again, i will let you know how it goes. takes 2-3 hours to download cause im a free sammobile user. hehe
Thank you very much.
EDIT01: ok, i am downloading the Pakistan version and the google drive PIT. thank you
shairaf said:
Wow thanks, only difference im seeing is that i used the latest update one for saudi and it does not say (STC). is that the reason?
No, i kind of learned by watching sammobile youtube guide. so i can do it
Thank you once again, i will let you know how it goes. takes 2-3 hours to download cause im a free sammobile user. hehe
Thank you very much.
Click to expand...
Click to collapse
Check my other post above. You need to download and flash the 2nd one along with the pit file.
Try that one first. If it does not work try the first link, the saudi one
callumbr1 said:
Check my other post above. You need to download and flash the 2nd one along with the pit file.
Try that one first. If it does npt work try the first link, the saudi one
Click to expand...
Click to collapse
hehe. got it. i also editted my post a second before this post
will do.
shairaf said:
hehe. got it. i also editted my post a second before this post
will do.
Click to expand...
Click to collapse
Keep me updated
callumbr1 said:
Keep me updated
Click to expand...
Click to collapse
I Shall.
I also wanted to ask when i click on odin3 3.12 Pit tab, it says its only for Engineers. That kind of caught my eye.
Is it a risky thing using a pit file? as in a chance of bricking the phone or its just a warning odin3 gives?
shairaf said:
I Shall.
I also wanted to ask when i click on odin3 3.12 Pit tab, it says its only for Engineers. That kind of caught my eye.
Is it a risky thing using a pit file? as in a chance of bricking the phone or its just a warning odin3 gives?
Click to expand...
Click to collapse
Its just a warning. Dont worry about it. As long as you only flash it with the PAK firmware it will be fine. Its a message that will always pop up when you click on pit.
callumbr1 said:
Its just a warning. Dont worry about it. As long as you only flash it with the PAK firmware it will be fine. Its a message that will always pop up when you click on pit.
Click to expand...
Click to collapse
Sorry for the late response, it took 7 hours to download PAK version from Sammobile.
I just tried re flashing with PAK version and including the pit provided. but it shows the same result. storage as 16gb.
im downloading ARABIC (STC) one now to try.
Will put it to download and go to work and give you a headsup after trying within 4 hours (If the download has completed).
Thank you very much.
EDIT01:
http://imgur.com/a/6cdAH
Sorry i could not figure out how to post image using the forum one :S
EDIT02:
I just tried to flash my phone with the IRAN one where we had 4 files totally (this was the one we used when we went from rooted s6 edge plus to stock rom) but used only AP. This time i tried with all 4 and it says (Success 0/ Failure1).
So i just reflashed Saudi one i used before and now downloading Saudi (STC) from Sammobile. will let you know after i try it
Oh and i also wanted to ask. reflashing phone a number of time a day will pose any risk to it? or you can just do it any amount of time?
shairaf said:
Sorry for the late response, it took 7 hours to download PAK version from Sammobile.
I just tried re flashing with PAK version and including the pit provided. but it shows the same result. storage as 16gb.
im downloading ARABIC (STC) one now to try.
Will put it to download and go to work and give you a headsup after trying within 4 hours (If the download has completed).
Thank you very much.
EDIT01:
http://imgur.com/a/6cdAH
Sorry i could not figure out how to post image using the forum one :S
EDIT02:
I just tried to flash my phone with the IRAN one where we had 4 files totally (this was the one we used when we went from rooted s6 edge plus to stock rom) but used only AP. This time i tried with all 4 and it says (Success 0/ Failure1).
So i just reflashed Saudi one i used before and now downloading Saudi (STC) from Sammobile. will let you know after i try it
Oh and i also wanted to ask. reflashing phone a number of time a day will pose any risk to it? or you can just do it any amount of time?
Click to expand...
Click to collapse
The one you tried to flash with 4 files you need to flash all files not just one. Thats why it failed.
I have seen this happen before and it should flash the partition back to 32GB after flashing stock with pit.
Before you flash the next one reply here so i can guide you.
And dont worry about the amount of times you flash it. It will do no harm no matter how many times you flssh it.
callumbr1 said:
The one you tried to flash with 4 files you need to flash all files not just one. Thats why it failed.
I have seen this happen before and it should flash the partition back to 32GB after flashing stock with pit.
Before you flash the next one reply here so i can guide you.
And dont worry about the amount of times you flash it. It will do no harm no matter how many times you flssh it.
Click to expand...
Click to collapse
Hi, im currently at work and will be home within an hour.
This morning i used IRAN (4 file one) and used all 4 files on odin. Here is what i did in detail.
1. Opened Odin 3 v3.12
2. Uploaded BL (1st), AP (2nd), CP (3rd) and CSC (Last)
3. Under options - > only Auto Reboot and F.Reset Time was ticked.
4. I hold volume down, menu button and power button at same time and pressed volume up button.
5. I connected the phone to Computer.
6. Odin3 recognized phone and i clicked start.
Within 2-3 seconds it said it has failed, and i used the SAUDI file to reflash back to normal (As i was late for work).
.............................................................................................................................................................................................................................................................................................................................
For the PAK file with the PIT you provided, i did everything almost the same other than it had only AP file and i had Re-partition ticked as well. It flashed fine but showed the same 16gb storage limit.
I will be home soon and post here beforehand if its easier for you and allowed in forum to use skypecall or such, that is indeed fine for me as well.
Thank you very much.
shairaf said:
Hi, im currently at work and will be home within an hour.
This morning i used IRAN (4 file one) and used all 4 files on odin. Here is what i did in detail.
1. Opened Odin 3 v3.12
2. Uploaded BL (1st), AP (2nd), CP (3rd) and CSC (Last)
3. Under options - > only Auto Reboot and F.Reset Time was ticked.
4. I hold volume down, menu button and power button at same time and pressed volume up button.
5. I connected the phone to Computer.
6. Odin3 recognized phone and i clicked start.
Within 2-3 seconds it said it has failed, and i used the SAUDI file to reflash back to normal (As i was late for work).
.............................................................................................................................................................................................................................................................................................................................
For the PAK file with the PIT you provided, i did everything almost the same other than it had only AP file and i had Re-partition ticked as well. It flashed fine but showed the same 16gb storage limit.
I will be home soon and post here beforehand if its easier for you and allowed in forum to use skypecall or such, that is indeed fine for me as well.
Thank you very much.
Click to expand...
Click to collapse
Okay.... what error did you get in odin when trying to flash the 4 files?
I have whatsapp and facebook messenger, pm me when you are free after work
So my dad got this new s7 edge for me. i used it for 1 day or so and realised that the android version is till on 6.0.1 . i tried to update the device manually but it says that its up-to-date, but im sure enough that its not. i also tried the smart switch method from Pc , but there is now update option in the smartswitch software as if the device is upto date.
I downloaded a root checker app to see if the device has been rooted or not , but the app shows that there are no signs for rooting. Can someone please help me with this, im tired of trying.
Saad Mansuri said:
So my dad got this new s7 edge for me. i used it for 1 day or so and realised that the android version is till on 6.0.1 . i tried to update the device manually but it says that its up-to-date, but im sure enough that its not. i also tried the smart switch method from Pc , but there is now update option in the smartswitch software as if the device is upto date.
I downloaded a root checker app to see if the device has been rooted or not , but the app shows that there are no signs for rooting. Can someone please help me with this, im tired of trying.
Click to expand...
Click to collapse
You should be able to download a 7.0 Nougat Firmware for your Exact Model and then flash it via Odin.
Fatal_Scythe said:
You should be able to download a 7.0 Nougat Firmware for your Exact Model and then flash it via Odin.
Click to expand...
Click to collapse
Oh.. but i am a noob and dont know much about all these stuff can u provide me a link which contains thr proper instructions ?
Saad Mansuri said:
Oh.. but i am a noob and dont know much about all these stuff can u provide me a link which contains thr proper instructions ?
Click to expand...
Click to collapse
Yes sure. Give me some time to look up the Files you need. What's your Model Nr.?
Fatal_Scythe said:
Yes sure. Give me some time to look up the Files you need. What's your Model Nr.?
Click to expand...
Click to collapse
Model no. SM-G935T
Saad Mansuri said:
Model no. SM-G935T
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935T/TMB/download/G935TUVS4BRC1/215301
If I'm not wrong you have the S7 Edge from USA T-Mobile Carrier. This Link has the latest Android 7.0 Nougat Update (Build 12.04.2018) for the S7 Edge [USA T-Mobile].
Okay, once you downloaded the Firmware, you have to extract it. You should get an .tar or .tar.md5 file then.
Now you need to Download the Flashtool for Samsung Devices called "Odin"
Link: https://odin3.en.lo4d.com/download
This File contains the Latest Odin Tool Version 3.13.1
Send me Message again once both Downloads are finished and you extracted the Firmware so I can tell you the final steps to flash your Device
Fatal_Scythe said:
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935T/TMB/download/G935TUVS4BRC1/215301
If I'm not wrong you have the S7 Edge from USA T-Mobile Carrier. This Link has the latest Android 7.0 Nougat Update (Build 12.04.2018) for the S7 Edge [USA T-Mobile].
Okay, once you downloaded the Firmware, you have to extract it. You should get an .tar or .tar.md5 file then.
Now you need to Download the Flashtool for Samsung Devices called "Odin"
Link: https://odin3.en.lo4d.com/download
This File contains the Latest Odin Tool Version 3.13.1
Send me Message again once both Downloads are finished and you extracted the Firmware so I can tell you the final steps to flash your Device
Click to expand...
Click to collapse
sure!
Fatal_Scythe said:
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935T/TMB/download/G935TUVS4BRC1/215301
If I'm not wrong you have the S7 Edge from USA T-Mobile Carrier. This Link has the latest Android 7.0 Nougat Update (Build 12.04.2018) for the S7 Edge [USA T-Mobile].
Okay, once you downloaded the Firmware, you have to extract it. You should get an .tar or .tar.md5 file then.
Now you need to Download the Flashtool for Samsung Devices called "Odin"
Link: https://odin3.en.lo4d.com/download
This File contains the Latest Odin Tool Version 3.13.1
Send me Message again once both Downloads are finished and you extracted the Firmware so I can tell you the final steps to flash your Device
Click to expand...
Click to collapse
Alright , finally done downloading both of them and extracted that firmware file
Saad Mansuri said:
Alright , finally done downloading both of them and extracted that firmware file
Click to expand...
Click to collapse
Good. One Question first: is the Firmware a single .tar File? If yes, then start Odin, select AP and select the Extracted Firmware File.
After that (Backup all your Important Data first before proceeding!) you have to put your Phone into the Download Mode, Power it off, wait a few Seconds, and then press and hold Volume Down Button and Home Button and after that press and hold the Power Button. If you get a Blue Screen displaying a Warning, everything is good and you can enter the Download Mode by pressing Volume Up Button another Time. Then Connect it to your PC and wait for Odin to say "Added!" after that simply hit Start to Flash.
Fatal_Scythe said:
You should be able to download a 7.0 Nougat Firmware for your Exact Model and then flash it via Odin.
Click to expand...
Click to collapse
Fatal_Scythe said:
Good. One Question first: is the Firmware a single .tar File? If yes, then start Odin, select AP and select the Extracted Firmware File.
After that (Backup all your Important Data first before proceeding!) you have to put your Phone into the Download Mode, Power it off, wait a few Seconds, and then press and hold Volume Down Button and Home Button and after that press and hold the Power Button. If you get a Blue Screen displaying a Warning, everything is good and you can enter the Download Mode by pressing Volume Up Button another Time. Then Connect it to your PC and wait for Odin to say "Added!" after that simply hit Start to Flash.
Click to expand...
Click to collapse
Oh understood , But there are 5 files. And i have a question or 2 to ask , if the usb connection gets interrupted will it do any bad to my phone ? And how much time.will it take to complete ?
Saad Mansuri said:
Oh understood , But there are 5 files. And i have a question or 2 to ask , if the usb connection gets interrupted will it do any bad to my phone ? And how much time.will it take to complete ?
Click to expand...
Click to collapse
Answer 1: If it gets interrupted while flash, it normally shouldn't do any damage. It would be then called a Soft-Brick and you would have to flash it again.
Answer 2: Depends on what File Size the Firmware has. But normally it shouldn't take more than 5-10 Minutes.
If I understood right, you have 5 Files.
Do they (kinda) look like this or have such letters in it?
- BL ...
- AP ...
- CP ...
- CSC ...
- USERDATA ...
If yes, then you just have to put the files to the correct Tab. Like BL ... to the BL tab and CSC to the CSC Tab.
Fatal_Scythe said:
Answer 1: If it gets interrupted while flash, it normally shouldn't do any damage. It would be then called a Soft-Brick and you would have to flash it again.
Answer 2: Depends on what File Size the Firmware has. But normally it shouldn't take more than 5-10 Minutes.
If I understood right, you have 5 Files.
Do they (kinda) look like this or have such letters in it?
- BL ...
- AP ...
- CP ...
- CSC ...
- USERDATA ...
If yes, then you just have to put the files to the correct Tab. Like BL ... to the BL tab and CSC to the CSC Tab.
Click to expand...
Click to collapse
yep thats correct , 4 of them u mentioned are present but instead of USERDATA , there's HOME_CSC_TMB.
If thats not a problem , i must start the process
Saad Mansuri said:
yep thats correct , 4 of them u mentioned are present but instead of USERDATA , there's HOME_CSC_TMB.
If thats not a problem , i must start the process
Click to expand...
Click to collapse
A HOME_CSC File is no Problem either.
Good Luck!
Fatal_Scythe said:
A HOME_CSC File is no Problem either.
Good Luck!
Click to expand...
Click to collapse
Finally i got some time for flashing the ROM.
I did exactly as u told me too.. and guess what, it WORKED !!!
Im using 7.0 right now and its amazing i cant thank you enough bro..
Someone give this man a medal ?
Saad Mansuri said:
Finally i got some time for flashing the ROM.
I did exactly as u told me too.. and guess what, it WORKED !!!
Im using 7.0 right now and its amazing i cant thank you enough bro..
Someone give this man a medal
Click to expand...
Click to collapse
That's great! -> Check your PN: I'm sure you're gonna enjoy your Device on 8.0 even more hehe
Greetings^^
Hello there!
I installed TWRP recovery mode on my phone in order to root it, I watched a very goog tutorial (
) on how to do it. After installing Magisk, my Galaxy J6 is stuck at logo bootloop, I uninstalled Magisk but it did not help. I tried to wipe data, format and everything from TWRP, but it did not work.
How do I fix my phone??
mahaci7363 said:
Hello there!
I installed TWRP recovery mode on my phone in order to root it, I watched a very goog tutorial (
) on how to do it. After installing Magisk, my Galaxy J6 is stuck at logo bootloop, I uninstalled Magisk but it did not help. I tried to wipe data, format and everything from TWRP, but it did not work.
How do I fix my phone??
Click to expand...
Click to collapse
You can access download mode?
Then I recommend to restart from scratch by using Odin to flash latest Stock ROM (get it via samfirm_reborn).
bmwdroid said:
You can access download mode?
Then I recommend to restart from scratch by using Odin to flash latest Stock ROM (get it via samfirm_reborn).
Click to expand...
Click to collapse
Yes I can access it. What would the Stock ROM do for the phone? I am just curious and don't want to mess my phone anymore
mahaci7363 said:
Yes I can access it. What would the Stock ROM do for the phone? I am just curious and don't want to mess my phone anymore
Click to expand...
Click to collapse
It will be like you can buy it in a store.
Stock ROM = Samsungs firmware
bmwdroid said:
It will be like you can buy it in a store.
Stock ROM = Samsungs firmware
Click to expand...
Click to collapse
Now I see, do you think it will work after wiping data using TWRP recovery?? USB-debugging was turned on before the reset, do you think it turned off?
bmwdroid said:
You can access download mode?
Then I recommend to restart from scratch by using Odin to flash latest Stock ROM (get it via samfirm_reborn).
Click to expand...
Click to collapse
samfirm_reborn? Do you have a link?
mahaci7363 said:
Now I see, do you think it will work after wiping data using TWRP recovery?? USB-debugging was turned on before the reset, do you think it turned off?
Click to expand...
Click to collapse
Don't understand your question.
You wrote you've wiped already and it didn't help.
In download mode USB-debugging doesn't work anyway.
As system is wiped it can't work imo.
GitHub - ivanmeler/SamFirm_Reborn
Contribute to ivanmeler/SamFirm_Reborn development by creating an account on GitHub.
github.com
bmwdroid said:
Don't understand your question.
You wrote you've wiped already and it didn't help.
In download mode USB-debugging doesn't work anyway.
As system is wiped it can't work imo.
GitHub - ivanmeler/SamFirm_Reborn
Contribute to ivanmeler/SamFirm_Reborn development by creating an account on GitHub.
github.com
Click to expand...
Click to collapse
Thank you for the link, but there is no file with the name Stock ROM or firmware or something like that. How am I supposed to download the Stock ROM to my laptop??
Please bear with me, I know I am aksing to much
@mahaci7363 use samfirm to download stock ROM from Samsungs servers.
Check "binary nature"
Unzip the file you'll get into 4 o 5 different files (AP, BL, CSC aso)
Start Odin and insert the files appropriately.
bmwdroid said:
@mahaci7363 use samfirm to download stock ROM from Samsungs servers.
Check "binary nature"
Unzip the file you'll get into 4 o 5 different files (AP, BL, CSC aso)
Start Odin and insert the files appropriately.
Click to expand...
Click to collapse
@bmwdroid Thank you so much! Then all I have to do is start Odin and wait for the installation (I believe I should be in download mode). Can I use Sammobile? (Found a firmware for Nordic countries - this is where I live) In Samfirms I did not find a version for Nordic countries.
I really appreciate your help! Thanks mate!
mahaci7363 said:
@bmwdroid Thank you so much! Then all I have to do is start Odin and wait for the installation (I believe I should be in download mode). Can I use Sammobile? (Found a firmware for Nordic countries - this is where I live) In Samfirms I did not find a version for Nordic countries.
I really appreciate your help! Thanks mate!
Click to expand...
Click to collapse
Download mode is necessary for using Odin.
Sammobile can be used as well, but sometimes it only gives you a one part file which might not help as much as the multiple part files you'd get using samfirm.
Which region code did you try there? NEE?
How to Find Your Samsung Galaxy CSC Region Code? - KrispiTech
CSC stands for Country Specific Code. It is needed to download firmware for Samsung Galaxy smartphones and we can find out what ours is in
krispitech.com
Device type SM-J600F ?
Never happened for my eight devices that samfirm didn't find the stock ROM.
One part file has to be put in AP on Odin.
@mahaci7363 you seem to be right.
Just tried myself and with J600F I couldn't find any.
That's peculiar.
So you have to rely on sammobile.
bmwdroid said:
@mahaci7363 you seem to be right.
Just tried myself and with J600F I couldn't find any.
That's peculiar.
So you have to rely on sammobile.
Click to expand...
Click to collapse
gotta be SM-J600FN plus NEE!
then it is found
bmwdroid said:
Download mode is necessary for using Odin.
Sammobile can be used as well, but sometimes it only gives you a one part file which might not help as much as the multiple part files you'd get using samfirm.
Which region code did you try there? NEE?
How to Find Your Samsung Galaxy CSC Region Code? - KrispiTech
CSC stands for Country Specific Code. It is needed to download firmware for Samsung Galaxy smartphones and we can find out what ours is in
krispitech.com
Device type SM-J600F ?
Never happened for my eight devices that samfirm didn't find the stock ROM.
One part file has to be put in AP on Odin.
Click to expand...
Click to collapse
My device type is SM-J600FN, but it is okay, I can download the SM-J600F version.
Isn't CSC the same as the build number?? In that case, I copied it before damaging my phone: J600FXXUACVC2.
I found a firmware version for J600FXXUACVC2 but its region is Iraq, which is really strange, since I live in Sweden and bought the phone from Sweden. Unfortunately I did not manage to find the CSC code, in downloading mode I don't see information about my device, I only see this: (check the image).
Can't I just choose the version Nordic countries or is it going to damage my phone more?? In that case, I can download the Iraq version which has the same build number as my J6
https://www.sammobile.com/samsung/galaxy-j6/firmware/SM-J600F/MID/download/J600FXXUACVC2/1626184/ (Iraq version)
https://www.sammobile.com/samsung/galaxy-j6/firmware/SM-J600FN/NEE/download/J600FNXXUACVC2/1627241/ (Nordic Countries version)
Edit: I did not see your comments before this comment, thanks for the help @bmwdroid ! I really appreciate it!
@bmwdroid the downloading instructions on sammobile:
Add the firmware files to their designated slots (AP in AP, BL in BL,
CP in CP, HOME_CSC in CSC). Do not tick any extra boxes. The only
options to be ticked are F. Reset Time and Auto-Reboot.
What is meant with the option F? I don't find any options in Odin.
Edit: I found it
mahaci7363 said:
@bmwdroid the downloading instructions on sammobile:
Add the firmware files to their designated slots (AP in AP, BL in BL,
CP in CP, HOME_CSC in CSC). Do not tick any extra boxes. The only
options to be ticked are F. Reset Time and Auto-Reboot.
What is meant with the option F? I don't find any options in Odin.
Edit: I found it
Click to expand...
Click to collapse
You are my life saver,i have done like you and its not my phone (my friends phone),5 minute i think that i brick his samsung,but with this you are lifesaver,thx very much bro you are crazy!!!