Related
Goomanager app flashed a wrong recovery to the phone, now it won't boot but is stuck at the black "Samsung GALAXY Txt" Boot screen. does anybody know how to fix this? i wouldn't mind having to hard reset it. I tried flashing new recovery using adb/fastboot but adb doesn't "see" the device. thanks if you answer!:good:
bdec said:
Goomanager app flashed a wrong recovery to the phone, now it won't boot but is stuck at the black "Samsung GALAXY Txt" Boot screen. does anybody know how to fix this? i wouldn't mind having to hard reset it. I tried flashing new recovery using adb/fastboot but adb doesn't "see" the device. thanks if you answer!:good:
Click to expand...
Click to collapse
I'd try using Odin to flash the stock firmware for your phone (Can be found on Samfirmware).
Sent from my SCH-I535 using xda premium
shimp208 said:
I'd try using Odin to flash the stock firmware for your phone (Can be found on Samfirmware).
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
kudos for you my friend, it worked!
have some cookies
__________
/ YAY \
/ IT'S A \
\ COOKIE /
\__________/
sorry if my art sucks
Unable to enter Download Mode
I flashed a wrong ROM as well, but my problem is that I can't enter Download Mode to re-flash the device with Odin.
Any idea?
Thanks
caraconan said:
I flashed a wrong ROM as well, but my problem is that I can't enter Download Mode to re-flash the device with Odin.
Any idea?
Thanks
Click to expand...
Click to collapse
Are you able to get into recovery mode still? For download mode make sure your holding down the correct key combination to get into download mode. You can also try using a USB Download jig which you can get from here, which when plugged into the phone will force the phone into download mode. As a fair warning the download jig's don't usually work with newer model phones but for a couple bucks it's worth a try. Let me know if you still have questions.
Motherboard dead?
Sorry to invade this post. I would just like to have confirmation on my device and it's pretty similar to what is found here. The only way I can access download mode is by pressing Q+Power and then adding the battery. Odin connects to everything, I can even flash the firmware from Bell for my Galaxy gt-i5510M and it PASS. But I can't still power it up, is the motherboard or something similar dead?
Thanks
jfilippo said:
Sorry to invade this post. I would just like to have confirmation on my device and it's pretty similar to what is found here. The only way I can access download mode is by pressing Q+Power and then adding the battery. Odin connects to everything, I can even flash the firmware from Bell for my Galaxy gt-i5510M and it PASS. But I can't still power it up, is the motherboard or something similar dead?
Thanks
Click to expand...
Click to collapse
If your device can still access download mode and Odin can successfully connect to your device an flash the firmware your device's motherboard is not dead. Try re-flashing the firmware to your device and checking auto-reboot option in Odin this way when the firmware finishes flashing the device will automatically reboot and hopefully power on then.
Thanks for the fast answer, you've been answering 3 people back on this thread, impressive.
Unfortunately I made sure of that, the auto reboot was checked but it doesn't reboot the device. I wanted to put a screenshot but I didn't realize you need around 10 posts to be able to post outside links. I've been looking through xda for a while but never posting.
I'm used to adb, so Odin is a bit new I have to admit. I've put the ops file, callisto in this case, in the appropriate ops , and then the One Package file I got from samfirmware "I5510UGKC5_I5510BMCKC5_BMC". Is there something else I could flash? It wouldn't be like some other phones where I could put down a Custom Recovery, go back to stock, etc. ?
jfilippo said:
Thanks for the fast answer, you've been answering 3 people back on this thread, impressive.
Unfortunately I made sure of that, the auto reboot was checked but it doesn't reboot the device. I wanted to put a screenshot but I didn't realize you need around 10 posts to be able to post outside links. I've been looking through xda for a while but never posting.
I'm used to adb, so Odin is a bit new I have to admit. I've put the ops file, callisto in this case, in the appropriate ops , and then the One Package file I got from samfirmware "I5510UGKC5_I5510BMCKC5_BMC". Is there something else I could flash? It wouldn't be like some other phones where I could put down a Custom Recovery, go back to stock, etc. ?
Click to expand...
Click to collapse
To clarify did you put the firmware in the correct slot in Odin (PDA slot in this case) when flashing? Also double check your flashing the correct firmware for your device, as that could also be part of the problem.
Well you figured some things that were wrong. I was putting it in the one package slot. So I tried in the PDA slot, but it said "Invalid Image Type". From the sticker inside the battery compartment, it does say it's the GT-I5510M, so the 551 from Bell Canada it seems. But it's not easy to find a firmware for it, and the only one I found is at sammobile. There's plenty others under GT-I5510, but they're all European.
Any idea what I could use instead? The full name of the firmware I have is: "I5510UGKC5_BMCKC5_HOMEDOWNLOAD_TEST.tar" or "I5510UGKC5_I5510BMCKC5_BMC.zip" for the zip.
Thanks a lot for following this.
jfilippo said:
Well you figured some things that were wrong. I was putting it in the one package slot. So I tried in the PDA slot, but it said "Invalid Image Type". From the sticker inside the battery compartment, it does say it's the GT-I5510M, so the 551 from Bell Canada it seems. But it's not easy to find a firmware for it, and the only one I found is at sammobile. There's plenty others under GT-I5510, but they're all European.
Any idea what I could use instead? The full name of the firmware I have is: "I5510UGKC5_BMCKC5_HOMEDOWNLOAD_TEST.tar" or "I5510UGKC5_I5510BMCKC5_BMC.zip" for the zip.
Thanks a lot for following this.
Click to expand...
Click to collapse
You can try ignoring the "Invalid Image Type" error and trying to flash anyway just don't unplug your phone from Odin until it fully completes the process.
shimp208 said:
You try ignoring the "Invalid Image Type" error and trying to flash anyway just don't unplug your phone from Odin until it fully completes the process.
Click to expand...
Click to collapse
I did, but didn't work, I should have mentioned that. So the screen is still blank. But another driver got recognized and installed once the firmware was installed, Samsung com 3 if I remember well. I was hoping when I saw that!
jfilippo said:
I did, but didn't work, I should have mentioned that. So the screen is still blank. But another driver got recognized and installed once the firmware was installed, Samsung com 3 if I remember well. I was hoping when I saw that!
Click to expand...
Click to collapse
With the new COM port being recognized try the procedure again and see if it has any different results.
sorry to interrupt you people.. but are you sure that it is a proper firmware file. because the pda file is .tar file. also, try entering the recovery mode and flashing a cwm recovery. then check if the system is mounted.
Sorry I've been away, meaning no phone and laptop with me. Thanks for the replies. I tried to flash again the firmware last week but nothing happened unfortunately.
adisawant said:
sorry to interrupt you people.. but are you sure that it is a proper firmware file. because the pda file is .tar file. also, try entering the recovery mode and flashing a cwm recovery. then check if the system is mounted.
Click to expand...
Click to collapse
I can't access recovery mode, only download mode by simultaneously putting the battery back in and pushing Q+Power. But I am wondering also if it could be a wrong firmware... Can I just flash a custom rom through Odin? Would that make up for it? Anything to having back in working order.
jfilippo said:
Sorry I've been away, meaning no phone and laptop with me. Thanks for the replies. I tried to flash again the firmware last week but nothing happened unfortunately.
I can't access recovery mode, only download mode by simultaneously putting the battery back in and pushing Q+Power. But I am wondering also if it could be a wrong firmware... Can I just flash a custom rom through Odin? Would that make up for it? Anything to having back in working order.
Click to expand...
Click to collapse
i dont think flashing it will help. Just try to download another firmware and flash it.
anyone can sell samsung galaxy 551 i want to buy please call me 7384388281(india/kolkata)
***Problem Solved***
Hi experts,
My Galaxy S4 GT-I9506 is bricked with this error:
image 1 (attached)
It doesn't go to recovery mode anymore now!!!
First I tried to install custom Rom to root it with Odin, it did seem fine with "green pass" but didn't actually install any recovery mode (there wasn't any install option in recovery mode, there were only update options), nothing happened to phone at all and it worked normal.
Second i wiped the phone and cache and I download the firmware from Samsung website.
and after try to install, it failed in Odin:
Images 2 & 3 (attached)
I'm not sure but I think it was a wrong firmware, because I bought my phone online (kogan.com i think it is in Hongkong) and I downloaded the Australia Vodafone firmware (as I'm using Vodafone sim card).
anyone can help me?!
I should mention that phone doesn't go to recovery mode, failed in Odin, Kies can not fix it! the drivers all are up to date and no Antivirus runs in my PC.
Please someone help me.
Thanks & regards
Tesius
Go to samfirmware.com and download the latest firmware for your phone, try using that in odin
johndroid1999 said:
Open Kies and go to the Tools menu and click on Firmware initialization, enter your model name and serial number(under the battery). It will get you back to stock firmware
Click to expand...
Click to collapse
Kies can not fix it!
Tesius said:
Kies can not fix it!
Click to expand...
Click to collapse
Try samfirmware.com and odin then.
johndroid1999 said:
Try samfirmware.com and odin then.
Click to expand...
Click to collapse
did u really read my post?
failed in odin, kies can not support the device, no recovery mode...
Make sure your firmware downloaded right, because it is saying it is corrupt. (redownload and rerun Odin).
Tesius said:
did u really read my post?
failed in odin, kies can not support the device, no recovery mode...
Click to expand...
Click to collapse
i think your rom is currupted or half downloaded
redownload the rom from sammobile com and reflash the rom
Vaibhav Chauhan said:
i think your rom is currupted or half downloaded
redownload the rom from sammobile com and reflash the rom
Click to expand...
Click to collapse
Did you find any solution since?
I am facing the same issues and despite trying a few things, I am still stuck...
stephaned said:
Did you find any solution since?
I am facing the same issues and despite trying a few things, I am still stuck...
Click to expand...
Click to collapse
have you try to re download the rom?
stephaned said:
Did you find any solution since?
I am facing the same issues and despite trying a few things, I am still stuck...
Click to expand...
Click to collapse
The ROM was wrong, it was hard to find out which country my phone came from but i did need to use the ROM for the country the phone comes from...
Tesius said:
The ROM was wrong, it was hard to find out which country my phone came from but i did need to use the ROM for the country the phone comes from...
Click to expand...
Click to collapse
Tks - I have tried many ROMs from different counties (other ROM or even Kernel, etc...) and upload does not seem to work in ODIN. When you find the right country ROM, did it suddenly work in ODIN?
stephaned said:
Tks - I have tried many ROMs from different counties (other ROM or even Kernel, etc...) and upload does not seem to work in ODIN. When you find the right country ROM, did it suddenly work in ODIN?
Click to expand...
Click to collapse
yes, there are different operator in one country, first u have to find out in which operator of which country your phone is supported, then download the ROM from sammobile, make sure of using last version of Odin, and maybe it takes longer than u expects, for me last about 9min to get the Pass sign...
i had the same problem..so try downloading GT-I9506_501_Stock-Recovery_XXUDOF2 that file from internet and extract..and then flash it using odin..it worked for my s4 gti 9506...
I've got a SGH-i527 that when I turn it on it goes into Odin mode with the yellow triangle saying there was a problem with the upgrade and to connect it to Kies. Kies 3 will not work with it, and if I open Kies 2 it says it's connecting forever.
If I hold down volume and home button and start it up, and try to use Odin3 with AutoReboot and F. Reset Time check and flash I527UCUAMK2_I527ATTAMK2_I527UCUAMK2_HOME.tar.md5 it errors out and the device has SW REV CHECK FAIL : Fused 4 > Binary 3.
Someone help me out here?
smwoodward said:
I've got a SGH-i527 that when I turn it on it goes into Odin mode with the yellow triangle saying there was a problem with the upgrade and to connect it to Kies. Kies 3 will not work with it, and if I open Kies 2 it says it's connecting forever.
If I hold down volume and home button and start it up, and try to use Odin3 with AutoReboot and F. Reset Time check and flash I527UCUAMK2_I527ATTAMK2_I527UCUAMK2_HOME.tar.md5 it errors out and the device has SW REV CHECK FAIL : Fused 4 > Binary 3.
Someone help me out here?
Click to expand...
Click to collapse
Here's a little more info that might help. I tried booting the device without holding the buttons just a second ago, and this is what is on the screen.
Image size too large! W:1080, H:1920
display image fail
Secure Fail: Kernel
Ok, so I think I'm having issues because I don't have the right firmware.
From what I've been reading is that there isn't a firmware released for the i527 for AT&T correct? Or can someone point me in the direction for that ROM.
smwoodward said:
Ok, so I think I'm having issues because I don't have the right firmware.
From what I've been reading is that there isn't a firmware released for the i527 for AT&T correct? Or can someone point me in the direction for that ROM.
Click to expand...
Click to collapse
Have you figured anything out? Im having the same problem. Boot loop with same error when i try and run the MK2 firmware.
jaredb03 said:
Have you figured anything out? Im having the same problem. Boot loop with same error when i try and run the MK2 firmware.
Click to expand...
Click to collapse
I haven't found anything. is there seriously no stock rom for this phone?
From what I'm gathering there is no TAR available for 442 so we can't flash in Odin. I don't know about you but I can't get to recovery either.
jaredb03 said:
From what I'm gathering there is no TAR available for 442 so we can't flash in Odin. I don't know about you but I can't get to recovery either.
Click to expand...
Click to collapse
I can get it into download mode. How do you get it into recovery?
I'm having the same problem as well. I'm trying to fix my friends phone, their phone randomly shut off during a system update.
chapelfreak said:
I'm having the same problem as well. I'm trying to fix my friends phone, their phone randomly shut off during a system update.
Click to expand...
Click to collapse
I have 2 megas in my shop right now that the same thing happened to them. Now they cannot be restored through ODIN and Kies says that the model/SN is incorrect.
I got the same problem as well tired to root it didn't work then tired to flash stock rom and I.got display image.to large can some give me right file for rogers Canada cell please and.what.do I need.checked.off in odin
I found these files by chance in the forums somewhere, i repair cellphones and was working on a work around for the replacement screens not working for the i527 At&t, these files will put fix your current softbrick and restore you back to 4.4.2
Using odin v3.09 place each file in each location Pit in Pit, BL in BL, etc. And let finish, everything should be back working once complete. I do not take credit for these files, as stated before i found these on XDA somewhere and cant remember exactly.
Pit
BL
CP
CSC
AP
can u give another link for those files, plz ? cannot download them from those links.
dslayer83 said:
I found these files by chance in the forums somewhere, i repair cellphones and was working on a work around for the replacement screens not working for the i527 At&t, these files will put fix your current softbrick and restore you back to 4.4.2
Using odin v3.09 place each file in each location Pit in Pit, BL in BL, etc. And let finish, everything should be back working once complete. I do not take credit for these files, as stated before i found these on XDA somewhere and cant remember exactly.
Pit
BL
CP
CSC
AP
Click to expand...
Click to collapse
nicelys said:
can u give another link for those files, plz ? cannot download them from those links.
Click to expand...
Click to collapse
The links work good at my end, but i have the i527m (canadian version) and i cannot use the files, but all the links work.
dslayer83 said:
I found these files by chance in the forums somewhere, i repair cellphones and was working on a work around for the replacement screens not working for the i527 At&t, these files will put fix your current softbrick and restore you back to 4.4.2
Using odin v3.09 place each file in each location Pit in Pit, BL in BL, etc. And let finish, everything should be back working once complete. I do not take credit for these files, as stated before i found these on XDA somewhere and cant remember exactly.
Click to expand...
Click to collapse
This worked great for me, I had to leave off the PIT file though. :good:
Hey guys,
I'm trying to flash a brazilian firmware in my G925i thru ODIN, but the process stucks in NAND WRITE and nothing happen.
Someone knows what can I do?
I've heard somewhere that this is a hard brick
Sent from my Nexus 9 using XDA Free mobile app
Dudmaster said:
I've heard somewhere that this is a hard brick
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
What kind of brick?
rafaelpinaf said:
Hey guys,
I'm trying to flash a brazilian firmware in my G925i thru ODIN, but the process stucks in NAND WRITE and nothing happen.
Someone knows what can I do?
Click to expand...
Click to collapse
Hey there, I had a similar problem, what I did was re-install the Samsung drivers and reboot the computer also I turned off my lock screen and activation on the phone. Between the two of those things it allowed ODIN to have success.
androidvergen said:
Hey there, I had a similar problem, what I did was re-install the Samsung drivers and reboot the computer also I turned off my lock screen and activation on the phone. Between the two of those things it allowed ODIN to have success.
Click to expand...
Click to collapse
Even you have to put the phone in Download mode?
Edit: I tried the same and it still does not work :/
I tried again, but this time I ran the Odin as administrator. I passed thru NAND Write but in the end of all process it says FAIL and brick my phone.
I am trying to flash this file: G925IDVU1AOD1_G925IZTO1AOD1_G925IDVU1AOD1_HOME.tar.md5
You can see the issue attached:
you fail because you need a pit file..I can flash my normal firmware without a problem..but if I try a other one for example a provider one..it fails..for that we need the pit..and for that we need root..to extract it from the phone..and I don't won't to root ATM..
So how can I fix the device?
I tryng to use the Smart Switch PC but my device does not appear in the list to recovery emergency
I reinstalled the usb driver..
rafaelpinaf said:
So how can I fix the device?
I tryng to use the Smart Switch PC but my device does not appear in the list to recovery emergency
I reinstalled the usb driver..
Click to expand...
Click to collapse
you just need the version as firmware...you had before on the phone..this should flash
Alex-V said:
you just need the version as firmware...you had before on the phone..this should flash
Click to expand...
Click to collapse
I dont remember the older version, or the original version that was in my phone. It is stuck in Warning screen
rafaelpinaf said:
I dont remember the older version, or the original version that was in my phone. It is stuck in Warning screen
Click to expand...
Click to collapse
warning screen is no problem..it's still the download mode..but you need to know the firmware..may try to reboot both.. phone get into the warning mode again..to ensure good connection and retry smart switch
rafaelpinaf said:
I tried again, but this time I ran the Odin as administrator. I passed thru NAND Write but in the end of all process it says FAIL and brick my phone.
I am trying to flash this file: G925IDVU1AOD1_G925IZTO1AOD1_G925IDVU1AOD1_HOME.tar.md5
You can see the issue attached:
Click to expand...
Click to collapse
I've had this problem before, are you planning on rooting as well?
tiboric said:
I've had this problem before, are you planning on rooting as well?
Click to expand...
Click to collapse
No, I just want to change the firmware version because the version that came with the phone does not have Portuguese as all language. The revice was 100% stock, just tried to flash another country firmware thru Odin and it has been bricked.
rafaelpinaf said:
No, I just want to change the firmware version because the version that came with the phone does not have Portuguese as all language. The revice was 100% stock, just tried to flash another country firmware thru Odin and it has been bricked.
Click to expand...
Click to collapse
O.k the only way I know around this without finding your original firmware and flashing that, is to:
flash the firmware again, and wait until it fails again,
then hold vol down + power + home to get it to restart in to download mode again but keep odin open,
then flash CF autoroot .
then wait for the phone to reboot and it will install root then it will restart two more times on it own then should boot into the O.S.
(i take no responsibility if you mess up you device though but I have done this on more than one occasion and it always works for me)
I expect you could probably do this will another recovery(stock/twrp) instead of the CF autoroot one but have yet to try.
but you probably will be better off finding original firmware but you will not have Portuguese as you want.
Good luck with trying to fix your device
tiboric said:
O.k the only way I know around this without finding your original firmware and flashing that, is to:
flash the firmware again, and wait until it fails again,
then hold vol down + power + home to get it to restart in to download mode again but keep odin open,
then flash CF autoroot .
then wait for the phone to reboot and it will install root then it will restart two more times on it own then should boot into the O.S.
(i take no responsibility if you mess up you device though but I have done this on more than one occasion and it always works for me)
I expect you could probably do this will another recovery(stock/twrp) instead of the CF autoroot one but have yet to try.
but you probably will be better off finding original firmware but you will not have Portuguese as you want.
Good luck with trying to fix your device
Click to expand...
Click to collapse
Does the CF Autoroot work with G925I?
rafaelpinaf said:
Does the CF Autoroot work with G925I?
Click to expand...
Click to collapse
according to this you can use 925F version but I can not confirm my self as i don't have the device, If you don't mind rooting and tripping knox, I don't think you can do much more harm
androidvergen said:
Hey there, I had a similar problem, what I did was re-install the Samsung drivers and reboot the computer also I turned off my lock screen and activation on the phone. Between the two of those things it allowed ODIN to have success.
Click to expand...
Click to collapse
I also went through this problem too, and this helped thank you
But also for another phone I had to flash using a different computer for this to work.
rafaelpinaf said:
I dont remember the older version, or the original version that was in my phone. It is stuck in Warning screen
Click to expand...
Click to collapse
Maybe you can try each of the stock versions until you get the right one for your particular device. Also maybe a model number would help someone on here to identify what version you have, I don't know just throwing that out there.
My phone is G925i, and in the back says that it is made in Yateley, UK
Wich firmware you think I can try to flash?
I was trying the G925IDVU1AOD1_G925IZTO1AOD1_G925IDVU1AOD1 and then the phone has bee bricked.
rafaelpinaf said:
My phone is G925i, and in the back says that it is made in Yateley, UK
Wich firmware you think I can try to flash?
I was trying the G925IDVU1AOD1_G925IZTO1AOD1_G925IDVU1AOD1 and then the phone has bee bricked.
Click to expand...
Click to collapse
I can't link to the page I go to because of my noob post count but its samsung-updates in google. There is a whole section with various G925i versions I'm sure you'll find it there.
Hi, Im writting this threat to solve a problem with my s6 edge. Two weeks ago I bought a phone from Aliexpress, and when it came everithing was okey, it came with 5.1.1, so i decided to upgrade to 6.0.1. How the phone was new and i had no idea about which rom install I installed the 5 files rom XEU without making a backup of the EFS folder. After install it, the phone worked, but it wasn´t able to make calls or recieve SMS, the phone said "no registered on network". I tried to solve this problem installing a modem, but this aggravate the problem, appearing a prohibited sign in the status bar and with the IMEI and Baseband unknown. I tried to install another roms, but odin always failed, the only rom that odin let me install is the AP file of the 5 files XEU rom. I sent the phone to the Samsung technical service, and the said me that they can´t repair the phone because the phone is from Israel, and they only repair EU phone. The phone works, everything is okey but it can´t use the network services. How the technical service said me the phone is from Israel, and it came (if im not wrong) with this rom: "G925FXXU3COJ1_G925FOJK3COJ3_ILO" (5.1.1 rom from Israel), but now the only rom that works is "AP_G925FXXS3DPB1_CL7025264_QB8758701_REV02_user_low_ship.tar.md5" (the AP file from the 5 files 6.0.1 XEU rom). I don´t know how to solve the problem, the phone is totally new, and when I try to install any rom Odin gets fail. Can anybody help me? Is the first time I buy a good phone and on the third day it gets broken. Any solution? Please help me, thanks. (Sorry for my bad English, I´m from Spain)
jujomar said:
Hi, Im writting this threat to solve a problem with my s6 edge. Two weeks ago I bought a phone from Aliexpress, and when it came everithing was okey, it came with 5.1.1, so i decided to upgrade to 6.0.1. How the phone was new and i had no idea about which rom install I installed the 5 files rom XEU without making a backup of the EFS folder. After install it, the phone worked, but it wasn´t able to make calls or recieve SMS, the phone said "no registered on network". I tried to solve this problem installing a modem, but this aggravate the problem, appearing a prohibited sign in the status bar and with the IMEI and Baseband unknown. I tried to install another roms, but odin always failed, the only rom that odin let me install is the AP file of the 5 files XEU rom. I sent the phone to the Samsung technical service, and the said me that they can´t repair the phone because the phone is from Israel, and they only repair EU phone. The phone works, everything is okey but it can´t use the network services. How the technical service said me the phone is from Israel, and it came (if im not wrong) with this rom: "G925FXXU3COJ1_G925FOJK3COJ3_ILO" (5.1.1 rom from Israel), but now the only rom that works is "AP_G925FXXS3DPB1_CL7025264_QB8758701_REV02_user_low_ship.tar.md5" (the AP file from the 5 files 6.0.1 XEU rom). I don´t know how to solve the problem, the phone is totally new, and when I try to install any rom Odin gets fail. Can anybody help me? Is the first time I buy a good phone and on the third day it gets broken. Any solution? Please help me, thanks. (Sorry for my bad English, I´m from Spain)
Click to expand...
Click to collapse
Have You tried restoring ur phone with samsung smart switch ??
Bt U should have backed up the efs Anyway Try Smart Switch Maybe Ur Phone will bootup
Good Luck
osman34 said:
Have You tried restoring ur phone with samsung smart switch ??
Bt U should have backed up the efs Anyway Try Smart Switch Maybe Ur Phone will bootup
Good Luck
Click to expand...
Click to collapse
Yes I have tried with Samsung Smart Switch, but Nothing, it don't let me restore the phone
Try flashing a firmware with the number 4
For example I flashed with G925FXXU4DPGW
If you try to flash with a firmware with 3 in the place of 4 it might not work. So try it.
jujomar said:
Hi, Im writting this threat to solve a problem with my s6 edge. Two weeks ago I bought a phone from Aliexpress, and when it came everithing was okey, it came with 5.1.1, so i decided to upgrade to 6.0.1. How the phone was new and i had no idea about which rom install I installed the 5 files rom XEU without making a backup of the EFS folder. After install it, the phone worked, but it wasn´t able to make calls or recieve SMS, the phone said "no registered on network". I tried to solve this problem installing a modem, but this aggravate the problem, appearing a prohibited sign in the status bar and with the IMEI and Baseband unknown. I tried to install another roms, but odin always failed, the only rom that odin let me install is the AP file of the 5 files XEU rom. I sent the phone to the Samsung technical service, and the said me that they can´t repair the phone because the phone is from Israel, and they only repair EU phone. The phone works, everything is okey but it can´t use the network services. How the technical service said me the phone is from Israel, and it came (if im not wrong) with this rom: "G925FXXU3COJ1_G925FOJK3COJ3_ILO" (5.1.1 rom from Israel), but now the only rom that works is "AP_G925FXXS3DPB1_CL7025264_QB8758701_REV02_user_low_ship.tar.md5" (the AP file from the 5 files 6.0.1 XEU rom). I don´t know how to solve the problem, the phone is totally new, and when I try to install any rom Odin gets fail. Can anybody help me? Is the first time I buy a good phone and on the third day it gets broken. Any solution? Please help me, thanks. (Sorry for my bad English, I´m from Spain)
Click to expand...
Click to collapse
Just flash the stock firmware for your region.
Or try to flash stock XEU or BTU. Most international firmwares and multi csc firmwares come with efs or modem files.
If you are trying to flash a branded firmware this could be why as this happened when I tried to flash EVR rom.
I can link you to the stock XEU download that I'm using.
If you get an fail in odin let me know where it fails... example hidden.img fail or system.img fail.
callumbr1 said:
Just flash the stock firmware for your region.
Or try to flash stock XEU or BTU. Most international firmwares and multi csc firmwares come with efs or modem files.
If you are trying to flash a branded firmware this could be why as this happened when I tried to flash EVR rom.
I can link you to the stock XEU download that I'm using.
If you get an fail in odin let me know where it fails... example hidden.img fail or system.img fail.
Click to expand...
Click to collapse
Hi Callumbr1, I´ve tried to install the 5.1.1 rom of my country (spain), but Odin gets fail, at first it fails at "cm.bin" archive, so I deleted it from the tar archive, then I flash the rom again and another Odin problem, it failed at "hidden.img", so I also deleted it from the tar archive, afterwards I flash again and another odin problem at "sboot.bin" (this sboot archive always fail when I try to flash a rom), so I also deleted it. After having removed the 3 archives from the original tar archive (the rom was G925FXXU3COI9_G925FPHE3COI6_PHE), the rom started to flash normally but after it the phone gets stuck on Samsung galaxy S6 edge logo.
I also have tried to install the 5.1.1 XEU (G925FXXU3COI9_G925FOXA3COI9_XEU), but also same problem at "hidden.img" and at "sboot.bin", after deleting them, another bootloop. What can I do? Maybe I have to start trying to flash 6.0.1 roms, I will also try to flash roms with number 4 how Subhy259 said. What do you think Callumbr1, what can I do?
jujomar said:
Hi Callumbr1, I´ve tried to install the 5.1.1 rom of my country (spain), but Odin gets fail, at first it fails at "cm.bin" archive, so I deleted it from the tar archive, then I flash the rom again and another Odin problem, it failed at "hidden.img", so I also deleted it from the tar archive, afterwards I flash again and another odin problem at "sboot.bin" (this sboot archive always fail when I try to flash a rom), so I also deleted it. After having removed the 3 archives from the original tar archive (the rom was G925FXXU3COI9_G925FPHE3COI6_PHE), the rom started to flash normally but after it the phone gets stuck on Samsung galaxy S6 edge logo.
I also have tried to install the 5.1.1 XEU (G925FXXU3COI9_G925FOXA3COI9_XEU), but also same problem at "hidden.img" and at "sboot.bin", after deleting them, another bootloop. What can I do? Maybe I have to start trying to flash 6.0.1 roms, I will also try to flash roms with number 4 how Subhy259 said. What do you think Callumbr1, what can I do?
Click to expand...
Click to collapse
What firmware was you on before? Was it 6.0.1? Is so you have to flash a 6.0.1 rom. You can't flash from 6.0.1 to 5.1.1.
Hidden.img fail means you need pit file for partitions.
Was the device unlocked when you got it? It could have locked bootloader which means you will have to flash the firmware it came with.
http://www.sammobile.com/firmwares/download/85917/G925FXXU4DPGW_G925FOXA4DPGW_XEU/
Flash this firmware see if this works. It's multi csc European so should work.
If you get any errors copy the odin log to here so I can see. The good news is its not bricked. We just need to find the firmware that will flash
callumbr1 said:
What firmware was you on before? Was it 6.0.1? Is so you have to flash a 6.0.1 rom. You can't flash from 6.0.1 to 5.1.1.
Hidden.img fail means you need pit file for partitions.
Was the device unlocked when you got it? It could have locked bootloader which means you will have to flash the firmware it came with.
http://www.sammobile.com/firmwares/download/85917/G925FXXU4DPGW_G925FOXA4DPGW_XEU/
Flash this firmware see if this works. It's multi csc European so should work.
If you get any errors copy the odin log to here so I can see. The good news is its not bricked. We just need to find the firmware that will flash
Click to expand...
Click to collapse
Callumbr1 I´ve alrready installed the rom you said (without any problem) and now the phone detects the sim and has the correct IMEI and S/N, but when I try to call or use the network the phone says "Not registered on network", why is this happening? How can I solve this? It´s a modem problem?
jujomar said:
Callumbr1 I�´ve alrready installed the rom you said (without any problem) and now the phone detects the sim and has the correct IMEI and S/N, but when I try to call or use the network the phone says "Not registered on network", why is this happening? How can I solve this? It�´s a modem problem?
Click to expand...
Click to collapse
Go on to settings then reset. Reset network settings. then go onto mobile networks, set to LTE/3g/2g. Set work network to auto. Reboot phone and should work
Or set the network to the same as your sim
callumbr1 said:
Go on to settings then reset. Reset network settings. then go onto mobile networks, set to LTE/3g/2g. Set work network to auto. Reboot phone and should work
Or set the network to the same as your sim
Click to expand...
Click to collapse
I've tried that but still on "Not registered on network" (it should be a phone problem because the sim works in other phones), I think it's a modem problem, maybe flashing the modem of another rom could work. What do you think?
jujomar said:
I've tried that but still on "Not registered on network" (it should be a phone problem because the sim works in other phones), I think it's a modem problem, maybe flashing the modem of another rom could work. What do you think?
Click to expand...
Click to collapse
I would say to flash a firmware that is branded by the network you have.
callumbr1 said:
I would say to flash a firmware that is branded by the network you have.
Click to expand...
Click to collapse
How do I know which firmware is branded with the network I have?
jujomar said:
How do I know which firmware is branded with the network I have?
Click to expand...
Click to collapse
What is your sim network? And region?
callumbr1 said:
What is your sim network? And region?
Click to expand...
Click to collapse
My SIM operator is Orange and my region is Spain. I have tried to install the last 6.0.1 Spanish and the rom was almost flashed when Odin failed at hidden.img ://
jujomar said:
My SIM operator is Orange and my region is Spain. I have tried to install the last 6.0.1 Spanish and the rom was almost flashed when Odin failed at hidden.img ://
Click to expand...
Click to collapse
Download this app...
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Send me screen shots of the general, csc and firmware page.
Once I find this I can tell you what pit file you need to flash
callumbr1 said:
Download this app...
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Send me screen shots of the general, csc and firmware page.
Once I find this I can tell you what pit file you need to flash
Click to expand...
Click to collapse
Looks like this
callumbr1 said:
Looks like this
Click to expand...
Click to collapse
That's the photo
subhy259 said:
Try flashing a firmware with the number 4
For example I flashed with G925FXXU4DPGW
If you try to flash with a firmware with 3 in the place of 4 it might not work. So try it.
Click to expand...
Click to collapse
It worked, now the phone has correct IMEI and Baseband but says "Not registered on network", any idea?
jujomar said:
That's the photo
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...it-files-multi-thread-download-t3171636/page1
Look at this thread. You need the top pit file zerolte_eur_open.pit
In odin you need to insert the firmware into AP again and click on pit where the options are. Insert the downloaded pit file and make sure re partition and f.reset is checked and then flash.
callumbr1 said:
http://forum.xda-developers.com/gal...it-files-multi-thread-download-t3171636/page1
Look at this thread. You need the top pit file zerolte_eur_open.pit
In odin you need to insert the firmware into AP again and click on pit where the options are. Insert the downloaded pit file and make sure re partition and f.reset is checked and then flash.
Click to expand...
Click to collapse
(I forgot some photos) I'll try what you say