I've got a SGH-i527 that when I turn it on it goes into Odin mode with the yellow triangle saying there was a problem with the upgrade and to connect it to Kies. Kies 3 will not work with it, and if I open Kies 2 it says it's connecting forever.
If I hold down volume and home button and start it up, and try to use Odin3 with AutoReboot and F. Reset Time check and flash I527UCUAMK2_I527ATTAMK2_I527UCUAMK2_HOME.tar.md5 it errors out and the device has SW REV CHECK FAIL : Fused 4 > Binary 3.
Someone help me out here?
smwoodward said:
I've got a SGH-i527 that when I turn it on it goes into Odin mode with the yellow triangle saying there was a problem with the upgrade and to connect it to Kies. Kies 3 will not work with it, and if I open Kies 2 it says it's connecting forever.
If I hold down volume and home button and start it up, and try to use Odin3 with AutoReboot and F. Reset Time check and flash I527UCUAMK2_I527ATTAMK2_I527UCUAMK2_HOME.tar.md5 it errors out and the device has SW REV CHECK FAIL : Fused 4 > Binary 3.
Someone help me out here?
Click to expand...
Click to collapse
Here's a little more info that might help. I tried booting the device without holding the buttons just a second ago, and this is what is on the screen.
Image size too large! W:1080, H:1920
display image fail
Secure Fail: Kernel
Ok, so I think I'm having issues because I don't have the right firmware.
From what I've been reading is that there isn't a firmware released for the i527 for AT&T correct? Or can someone point me in the direction for that ROM.
smwoodward said:
Ok, so I think I'm having issues because I don't have the right firmware.
From what I've been reading is that there isn't a firmware released for the i527 for AT&T correct? Or can someone point me in the direction for that ROM.
Click to expand...
Click to collapse
Have you figured anything out? Im having the same problem. Boot loop with same error when i try and run the MK2 firmware.
jaredb03 said:
Have you figured anything out? Im having the same problem. Boot loop with same error when i try and run the MK2 firmware.
Click to expand...
Click to collapse
I haven't found anything. is there seriously no stock rom for this phone?
From what I'm gathering there is no TAR available for 442 so we can't flash in Odin. I don't know about you but I can't get to recovery either.
jaredb03 said:
From what I'm gathering there is no TAR available for 442 so we can't flash in Odin. I don't know about you but I can't get to recovery either.
Click to expand...
Click to collapse
I can get it into download mode. How do you get it into recovery?
I'm having the same problem as well. I'm trying to fix my friends phone, their phone randomly shut off during a system update.
chapelfreak said:
I'm having the same problem as well. I'm trying to fix my friends phone, their phone randomly shut off during a system update.
Click to expand...
Click to collapse
I have 2 megas in my shop right now that the same thing happened to them. Now they cannot be restored through ODIN and Kies says that the model/SN is incorrect.
I got the same problem as well tired to root it didn't work then tired to flash stock rom and I.got display image.to large can some give me right file for rogers Canada cell please and.what.do I need.checked.off in odin
I found these files by chance in the forums somewhere, i repair cellphones and was working on a work around for the replacement screens not working for the i527 At&t, these files will put fix your current softbrick and restore you back to 4.4.2
Using odin v3.09 place each file in each location Pit in Pit, BL in BL, etc. And let finish, everything should be back working once complete. I do not take credit for these files, as stated before i found these on XDA somewhere and cant remember exactly.
Pit
BL
CP
CSC
AP
can u give another link for those files, plz ? cannot download them from those links.
dslayer83 said:
I found these files by chance in the forums somewhere, i repair cellphones and was working on a work around for the replacement screens not working for the i527 At&t, these files will put fix your current softbrick and restore you back to 4.4.2
Using odin v3.09 place each file in each location Pit in Pit, BL in BL, etc. And let finish, everything should be back working once complete. I do not take credit for these files, as stated before i found these on XDA somewhere and cant remember exactly.
Pit
BL
CP
CSC
AP
Click to expand...
Click to collapse
nicelys said:
can u give another link for those files, plz ? cannot download them from those links.
Click to expand...
Click to collapse
The links work good at my end, but i have the i527m (canadian version) and i cannot use the files, but all the links work.
dslayer83 said:
I found these files by chance in the forums somewhere, i repair cellphones and was working on a work around for the replacement screens not working for the i527 At&t, these files will put fix your current softbrick and restore you back to 4.4.2
Using odin v3.09 place each file in each location Pit in Pit, BL in BL, etc. And let finish, everything should be back working once complete. I do not take credit for these files, as stated before i found these on XDA somewhere and cant remember exactly.
Click to expand...
Click to collapse
This worked great for me, I had to leave off the PIT file though. :good:
Related
Goomanager app flashed a wrong recovery to the phone, now it won't boot but is stuck at the black "Samsung GALAXY Txt" Boot screen. does anybody know how to fix this? i wouldn't mind having to hard reset it. I tried flashing new recovery using adb/fastboot but adb doesn't "see" the device. thanks if you answer!:good:
bdec said:
Goomanager app flashed a wrong recovery to the phone, now it won't boot but is stuck at the black "Samsung GALAXY Txt" Boot screen. does anybody know how to fix this? i wouldn't mind having to hard reset it. I tried flashing new recovery using adb/fastboot but adb doesn't "see" the device. thanks if you answer!:good:
Click to expand...
Click to collapse
I'd try using Odin to flash the stock firmware for your phone (Can be found on Samfirmware).
Sent from my SCH-I535 using xda premium
shimp208 said:
I'd try using Odin to flash the stock firmware for your phone (Can be found on Samfirmware).
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
kudos for you my friend, it worked!
have some cookies
__________
/ YAY \
/ IT'S A \
\ COOKIE /
\__________/
sorry if my art sucks
Unable to enter Download Mode
I flashed a wrong ROM as well, but my problem is that I can't enter Download Mode to re-flash the device with Odin.
Any idea?
Thanks
caraconan said:
I flashed a wrong ROM as well, but my problem is that I can't enter Download Mode to re-flash the device with Odin.
Any idea?
Thanks
Click to expand...
Click to collapse
Are you able to get into recovery mode still? For download mode make sure your holding down the correct key combination to get into download mode. You can also try using a USB Download jig which you can get from here, which when plugged into the phone will force the phone into download mode. As a fair warning the download jig's don't usually work with newer model phones but for a couple bucks it's worth a try. Let me know if you still have questions.
Motherboard dead?
Sorry to invade this post. I would just like to have confirmation on my device and it's pretty similar to what is found here. The only way I can access download mode is by pressing Q+Power and then adding the battery. Odin connects to everything, I can even flash the firmware from Bell for my Galaxy gt-i5510M and it PASS. But I can't still power it up, is the motherboard or something similar dead?
Thanks
jfilippo said:
Sorry to invade this post. I would just like to have confirmation on my device and it's pretty similar to what is found here. The only way I can access download mode is by pressing Q+Power and then adding the battery. Odin connects to everything, I can even flash the firmware from Bell for my Galaxy gt-i5510M and it PASS. But I can't still power it up, is the motherboard or something similar dead?
Thanks
Click to expand...
Click to collapse
If your device can still access download mode and Odin can successfully connect to your device an flash the firmware your device's motherboard is not dead. Try re-flashing the firmware to your device and checking auto-reboot option in Odin this way when the firmware finishes flashing the device will automatically reboot and hopefully power on then.
Thanks for the fast answer, you've been answering 3 people back on this thread, impressive.
Unfortunately I made sure of that, the auto reboot was checked but it doesn't reboot the device. I wanted to put a screenshot but I didn't realize you need around 10 posts to be able to post outside links. I've been looking through xda for a while but never posting.
I'm used to adb, so Odin is a bit new I have to admit. I've put the ops file, callisto in this case, in the appropriate ops , and then the One Package file I got from samfirmware "I5510UGKC5_I5510BMCKC5_BMC". Is there something else I could flash? It wouldn't be like some other phones where I could put down a Custom Recovery, go back to stock, etc. ?
jfilippo said:
Thanks for the fast answer, you've been answering 3 people back on this thread, impressive.
Unfortunately I made sure of that, the auto reboot was checked but it doesn't reboot the device. I wanted to put a screenshot but I didn't realize you need around 10 posts to be able to post outside links. I've been looking through xda for a while but never posting.
I'm used to adb, so Odin is a bit new I have to admit. I've put the ops file, callisto in this case, in the appropriate ops , and then the One Package file I got from samfirmware "I5510UGKC5_I5510BMCKC5_BMC". Is there something else I could flash? It wouldn't be like some other phones where I could put down a Custom Recovery, go back to stock, etc. ?
Click to expand...
Click to collapse
To clarify did you put the firmware in the correct slot in Odin (PDA slot in this case) when flashing? Also double check your flashing the correct firmware for your device, as that could also be part of the problem.
Well you figured some things that were wrong. I was putting it in the one package slot. So I tried in the PDA slot, but it said "Invalid Image Type". From the sticker inside the battery compartment, it does say it's the GT-I5510M, so the 551 from Bell Canada it seems. But it's not easy to find a firmware for it, and the only one I found is at sammobile. There's plenty others under GT-I5510, but they're all European.
Any idea what I could use instead? The full name of the firmware I have is: "I5510UGKC5_BMCKC5_HOMEDOWNLOAD_TEST.tar" or "I5510UGKC5_I5510BMCKC5_BMC.zip" for the zip.
Thanks a lot for following this.
jfilippo said:
Well you figured some things that were wrong. I was putting it in the one package slot. So I tried in the PDA slot, but it said "Invalid Image Type". From the sticker inside the battery compartment, it does say it's the GT-I5510M, so the 551 from Bell Canada it seems. But it's not easy to find a firmware for it, and the only one I found is at sammobile. There's plenty others under GT-I5510, but they're all European.
Any idea what I could use instead? The full name of the firmware I have is: "I5510UGKC5_BMCKC5_HOMEDOWNLOAD_TEST.tar" or "I5510UGKC5_I5510BMCKC5_BMC.zip" for the zip.
Thanks a lot for following this.
Click to expand...
Click to collapse
You can try ignoring the "Invalid Image Type" error and trying to flash anyway just don't unplug your phone from Odin until it fully completes the process.
shimp208 said:
You try ignoring the "Invalid Image Type" error and trying to flash anyway just don't unplug your phone from Odin until it fully completes the process.
Click to expand...
Click to collapse
I did, but didn't work, I should have mentioned that. So the screen is still blank. But another driver got recognized and installed once the firmware was installed, Samsung com 3 if I remember well. I was hoping when I saw that!
jfilippo said:
I did, but didn't work, I should have mentioned that. So the screen is still blank. But another driver got recognized and installed once the firmware was installed, Samsung com 3 if I remember well. I was hoping when I saw that!
Click to expand...
Click to collapse
With the new COM port being recognized try the procedure again and see if it has any different results.
sorry to interrupt you people.. but are you sure that it is a proper firmware file. because the pda file is .tar file. also, try entering the recovery mode and flashing a cwm recovery. then check if the system is mounted.
Sorry I've been away, meaning no phone and laptop with me. Thanks for the replies. I tried to flash again the firmware last week but nothing happened unfortunately.
adisawant said:
sorry to interrupt you people.. but are you sure that it is a proper firmware file. because the pda file is .tar file. also, try entering the recovery mode and flashing a cwm recovery. then check if the system is mounted.
Click to expand...
Click to collapse
I can't access recovery mode, only download mode by simultaneously putting the battery back in and pushing Q+Power. But I am wondering also if it could be a wrong firmware... Can I just flash a custom rom through Odin? Would that make up for it? Anything to having back in working order.
jfilippo said:
Sorry I've been away, meaning no phone and laptop with me. Thanks for the replies. I tried to flash again the firmware last week but nothing happened unfortunately.
I can't access recovery mode, only download mode by simultaneously putting the battery back in and pushing Q+Power. But I am wondering also if it could be a wrong firmware... Can I just flash a custom rom through Odin? Would that make up for it? Anything to having back in working order.
Click to expand...
Click to collapse
i dont think flashing it will help. Just try to download another firmware and flash it.
anyone can sell samsung galaxy 551 i want to buy please call me 7384388281(india/kolkata)
First I read all the stickies and tried every installation to go back to stock but Odin just freezes up. Also tried different USB ports and and computers and same results. I can only go into download mode.
You may need to repartition. Not knowing the history of how your phone got to where it is now, I can't be sure. Can you give me a complete rundown of your issue?
creepyncrawly said:
You may need to repartition. Not knowing the history of how your phone got to where it is now, I can't be sure. Can you give me a complete rundown of your issue?
Click to expand...
Click to collapse
How would I go about repartitioning the phone? I full wipe and flashed the new Shostock3 and it was doing fine. The next day when I woke up my phone had the sleep of death. The Galaxy S2 logo was stuck and I tried to get into recovery and it only showed half of the screen and was frozen. Now the screen says Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Go to the Download Repository. The link is in my sig.
First, try flashing full stock Gingerbread. Use the download under the heading I777UCKH7-CL503881 Stock Binaries. This is the full distribution which contains the bootloaders. It doesn't matter whether you use the one-click downloader, or the tar.md5 file with Odin stand alone. If this flash completes, then you're recovered. Follow the guides to root and install a custom Gingerbread kernel, then flash back to SHOstock3 or whatever firmware you want.
If this flash does not complete, then download the I777 UCKH7 PIT and use that in Odin stand alone with the above tar.md5 file. Insert the tar in the PDA slot, the pit in the PIT slot, and check repartition, then flash.
creepyncrawly said:
Go to the Download Repository. The link is in my sig.
First, try flashing full stock Gingerbread. Use the download under the heading I777UCKH7-CL503881 Stock Binaries. This is the full distribution which contains the bootloaders. It doesn't matter whether you use the one-click downloader, or the tar.md5 file with Odin stand alone. If this flash completes, then you're recovered. Follow the guides to root and install a custom Gingerbread kernel, then flash back to SHOstock3 or whatever firmware you want.
If this flash does not complete, then download the I777 UCKH7 PIT and use that in Odin stand alone with the above tar.md5 file. Insert the tar in the PDA slot, the pit in the PIT slot, and check repartition, then flash.
Click to expand...
Click to collapse
So I tried both the one-click downloader and flash doesn't not complete, same goes for odin and PIT file.
selw0nk said:
So I tried both the one-click downloader and flash doesn't not complete, same goes for odin and PIT file.
Click to expand...
Click to collapse
If you didn't try it already, now go back and flash just the tar.md5 file without the pit, again, and see if it will complete.
creepyncrawly said:
If you didn't try it already, now go back and flash just the tar.md5 file without the pit, again, and see if it will complete.
Click to expand...
Click to collapse
Just did and it is stuck at NAND Write Start!! My phone might have a hardware issue.
selw0nk said:
Just did and it is stuck at NAND Write Start!! My phone might have a hardware issue.
Click to expand...
Click to collapse
Yes, I was hoping that the problem is not hardware, but it was a thought from the beginning, given the sequence of failure. Is the phone by chance still under warranty?
Let's don't give up yet, though.
Things to try, then try to flash the full firmware in between.
1. Use Odin stand alone to flash just the I777 secondary bootloader.
2. Use Odin stand alone to flash just the param.lfs.
Try the instructions in this post.
creepyncrawly said:
Yes, I was hoping that the problem is not hardware, but it was a thought from the beginning, given the sequence of failure. Is the phone by chance still under warranty?
Let's don't give up yet, though.
Things to try, then try to flash the full firmware in between.
1. Use Odin stand alone to flash just the I777 secondary bootloader.
2. Use Odin stand alone to flash just the param.lfs.
Try the instructions in this post.
Click to expand...
Click to collapse
No it isn't anymore. My upgrade isn't until May. Do you think a usb jig will work?
Thanks I will try that and will let you know how it comes along.
selw0nk said:
Do you think a usb jig will work?
Click to expand...
Click to collapse
You can already get into download mode. I don't believe there is any difference in the download mode produced by a jig. A jig is really helpful if the wrong secondary bootloader was flashed by accident (or ignorance), and you can't get the phone into download mode any ohter way.
selw0nk said:
No it isn't anymore. My upgrade isn't until May. Do you think a usb jig will work?
Thanks I will try that and will let you know how it comes along.
Click to expand...
Click to collapse
Tried those these you mentioned and still stuck. I'm already losing hope and want to get a new phone or spare already. I think I have a few things saved in the phone too.
Update: My screen is stuck at the Samsung Galaxy S2 screen with the yellow triangle.
Same problem
selw0nk said:
Tried those these you mentioned and still stuck. I'm already losing hope and want to get a new phone or spare already. I think I have a few things saved in the phone too.
Update: My screen is stuck at the Samsung Galaxy S2 screen with the yellow triangle.
Click to expand...
Click to collapse
I am having the exact same problem and my update isn't until May too!! Is this a common hardware failure?
kunalm123 said:
I am having the exact same problem and my update isn't until May too!! Is this a common hardware failure?
Click to expand...
Click to collapse
What rom were you on if I may ask? I'm not sure, but I'm about ready to give on trying everything. I started using my old Nokia phone and have to manually add my contacts lol. Sad panda
selw0nk said:
What rom were you on if I may ask? I'm not sure, but I'm about ready to give on trying everything. I started using my old Nokia phone and have to manually add my contacts lol. Sad panda
Click to expand...
Click to collapse
I was using a stock unrooted SGS2. It just stop working out of the blue..back to nokia it is
So I think I am going to send my phone to Mobile Tech Videos and hope they can unbrick it. http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-at-t-jtag-brick-repair/
selw0nk said:
So I think I am going to send my phone to Mobile Tech Videos and hope they can unbrick it. http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-ii-at-t-jtag-brick-repair/
Click to expand...
Click to collapse
I think I have a similar issue on my phone (stalls in odin, I haven't flashed any PIT files yet), were they able to unbrick it?
Same issue here, The phone's stuck on Nand flash in Odin. Had tried all recommendations suggested here... Any updates on the phone sent to mobiletech guys?
Hey peeps
Ok I've been at this for two straight days now in order to try and unbrick this Telus Fascinate SGH-T959P
My buddy initially attempted to flash it with something and really messed it up to the point that even the battery wouldn't charge.
I don't even care if I get it to stock.. an amazing Rom/Kernel combo will also work.
So this is where I am today... and I have spent the last two days non-stop trying to fix this thing...I have been through sooo many forums posts and websites my brain is about to cook.
Software I am using
Odin v1.7 and v1.83.. I try to use the newest one.. just in case.
ADB / SDK installed and am able to push files across to the sdcard in my phone... everything seems good in that dept
Files that have got me to where I am today
T959TLJL3 Froyo original firmware (apparently)... but can not flash all of the files from the package ..zimage and a few others just fail to flash
s1_odin_20100512.pit file (Have atlas_v2.2.pit also but haven't had as much success with it)
SGH-T959-Stock_plus_voodoo_CwM_2.3.4v2
su-2.3.6.3-efgh-signed
I can successfully boot the phone into download mode every single time using the volume up and down while plugging in the usb cable
Also if i just hit the power button I get a Telus 4G / Samsung splash screen and then the phone boots into CwM Voodoo Recovery v3.0.2.8x (Orange??)
In the CwM recovery mode, I can now finally mount all partitions and it looks like things will flash.
Now that I've finally got this phone to this point, I don't want to mess it up.
I want to make sure I have the right files to complete this little project.
Need some direction from the pros.. Am I able to flash a custom rom now ? And if so, what one is best to use.
From this point how can I revert to stock? Do I have the right files ? And how since Odin fails to flash the ones I have.
I figured going to stock first was easier, then use Kies to update it.
Show me the way
Thanks.
jROC
Wow... I got it .. Finally... After I figure out exactly what I used for files.. I will let you know.
All I can tell you right now is that I was flashing a single files at a time then powering down and coming back into download mode to flash the next file.
Right now the phone is all booted up and Running Android v2.3.3 (GB LKG2) and even tho the phone is actually a T959P.. the boot screen shows up as a T959D. Interesting.
jroc99 said:
Wow... I got it .. Finally... After I figure out exactly what I used for files.. I will let you know.
All I can tell you right now is that I was flashing a single files at a time then powering down and coming back into download mode to flash the next file.
Right now the phone is all booted up and Running Android v2.3.3 (GB LKG2) and even tho the phone is actually a T959P.. the boot screen shows up as a T959D. Interesting.
Click to expand...
Click to collapse
Can you send me the T959P stock files please
robbylaw said:
Can you send me the T959P stock files please
Click to expand...
Click to collapse
No single file that I downloaded was able to flash the phone.
I ended up flashing individual files... and kinda had to mix and match, but was able to get the phone booting back into Android OS
However the phone was missing the EFS folder with IMEI info and such..
Still was not able to recover it 100%.
Message me with your email and I will try to send what I used.
jroc99 said:
No single file that I downloaded was able to flash the phone.
I ended up flashing individual files... and kinda had to mix and match, but was able to get the phone booting back into Android OS
However the phone was missing the EFS folder with IMEI info and such..
Still was not able to recover it 100%.
Message me with your email and I will try to send what I used.
Click to expand...
Click to collapse
i messaged you
Ok peeps... If anyone is looking for a firmware file to get their phone booting back into droid I have one that works.
Works on Telus T959P
I have dropbox setup and can share with you that way, just message me.
I need a copy
Sent from my GT-P5113 using xda app-developers app
I've been trying to unbrick an T959P as well, have it so i can also boot into CWM (from SGH-T959-Stock_plus_voodoo_CwM_2.3.4v2) but can never get it too boot into the OS. Tried several files to revert it back to stock but so far nothing has worked. Any hints would be appreciated, thanks in advance
To do it, get this file.
https://gofile.io/?c=tJd0Pd
Then get odin v1.85
https://gofile.io/?c=WHkZHO
Launch odin with admin powers (sudo/su for linux, or whatever).
Then click PDA and select the tar.md5 file and start.
Hopefully it soft bricked not hard bricked.
Fury_Phoenix said:
To do it, get this file.
https://gofile.io/?c=tJd0Pd
Then get odin v1.85
https://gofile.io/?c=WHkZHO
Launch odin with admin powers (sudo/su for linux, or whatever).
Then click PDA and select the tar.md5 file and start.
Hopefully it soft bricked not hard bricked.
Click to expand...
Click to collapse
I posted that in 2013 the device is long gone, thanks for the input though.
draekko said:
I posted that in 2013 the device is long gone, thanks for the input though.
Click to expand...
Click to collapse
Do you have twrp or cwm for the phone?
Fury_Phoenix said:
Do you have twrp or cwm for the phone?
Click to expand...
Click to collapse
I don't have the phone or any software related to that phone. That post was from 7 years ago.
HELP, i've downloaded countless versions of the Stock recovery MD5 file and none are working to unbrick my Verizon galaxy S4 Firmware ver:*VRUAME7 (came stock with this firmware when purchased) and nothing is working. I was trying to install the recovery files from "sxtpdevelopers"
After successfully rooting using the microSD card method, I stupidly installed GooIM and then tried to install twrp.. I forgot that this version of firmware didn't have the bootloader unlocked yet and when the I booted into recovery it took me straight to " firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." *I already tried KIES recovery but it asks for serial number. THERE NO DAMN serial numbers anywhere on the phone, battery, or box that work. (including IMEI)
I then figured DOWNLOAD MODE worked so let me flash the stock odin file but I keep getting a FAIL installation every time.
FYI; I'm using parallels for mac and windows 8 to run odin. all the com ports are ok and I know there isn't a connection problem.
Any help would be appreciated. THANKS.*
galannyc said:
HELP, i've downloaded countless versions of the Stock recovery MD5 file and none are working to unbrick my Verizon galaxy S4 Firmware ver:*VRUAME7 (came stock with this firmware when purchased) and nothing is working. I was trying to install the recovery files from "sxtpdevelopers"
After successfully rooting using the microSD card method, I stupidly installed GooIM and then tried installing twrp.. I forgot that this version of firmware didn't have the bootloader unlocked yet and when the I booted into recovery it took me straight to " firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." *I already tried KIES recovery but it asks for serial number. THERE NO DAMN serial numbers anywhere on the phone, battery, or box that work. (including IMEI)
I then figured DOWNLOAD MODE worked so let me flash the stock odin file but I keep getting a FAIL installation every time.
FYI; I'm using parallels for mac and windows 8 to run odin. all the com ports are ok and I know there isn't a connection problem.
Any help would be appreciated. THANKS.*
Click to expand...
Click to collapse
Yeah download mode IS the bootloader that is locked... sorry buddy but you either turn it in hoping they don't notice your screw up or use it as a paperweight
Sent from my SCH-I545 using xda app-developers app
galannyc said:
HELP, i've downloaded countless versions of the Stock recovery MD5 file and none are working to unbrick my Verizon galaxy S4 Firmware ver:*VRUAME7 (came stock with this firmware when purchased) and nothing is working. I was trying to install the recovery files from "sxtpdevelopers"
After successfully rooting using the microSD card method, I stupidly installed GooIM and then tried to install twrp.. I forgot that this version of firmware didn't have the bootloader unlocked yet and when the I booted into recovery it took me straight to " firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." *I already tried KIES recovery but it asks for serial number. THERE NO DAMN serial numbers anywhere on the phone, battery, or box that work. (including IMEI)
I then figured DOWNLOAD MODE worked so let me flash the stock odin file but I keep getting a FAIL installation every time.
FYI; I'm using parallels for mac and windows 8 to run odin. all the com ports are ok and I know there isn't a connection problem.
Any help would be appreciated. THANKS.*
Click to expand...
Click to collapse
i brick mine two days ago and i had the same problem trying to restore it bak, i went to this site "droidviews(dot)com/how-to-install-latest-official-firmware-on-samsung-galaxy-s4-all-models/comment-page-4/" and i scroll down to where it said "Where to Download the Firmware for Galaxy S4?" right below that you should see SCH-I545 and it also have a Note to it, download that zip file "SCH-I545_VZW_1_20130613171315_24s13crny1_fac.zip" and unzip it and u should be able to restore it bak to stock on Odin.
shadowshin said:
i brick mine two days ago and i had the same problem trying to restore it bak, i went to this site "droidviews(dot)com/how-to-install-latest-official-firmware-on-samsung-galaxy-s4-all-models/comment-page-4/" and i scroll down to where it said "Where to Download the Firmware for Galaxy S4?" right below that you should see SCH-I545 and it also have a Note to it, download that zip file "SCH-I545_VZW_1_20130613171315_24s13crny1_fac.zip" and unzip it and u should be able to restore it bak to stock on Odin.
Click to expand...
Click to collapse
THANK YOU SO MUCH!.. The funny thing is I had downloaded "SCH-I545_VZW_1_20130613171315_24s13crny1_fac.zip" already in my trials and tribulations. Probably the one I downloaded was corrupt because this one installed with a breeze. The one located on that site worked instantly. Now if we can just get that bootloader unlocked. I wish was a programming genius sometimes, I would unlock it; then take that ransom and donate it. Thanks again
Just wanted to say thanks. I was able to use that link + Odin3 to get my friend's Verizon Galaxy S4 back to normal. Best Buy and a Samsung rep at the store were unable to handle this lol
shadowshin said:
i brick mine two days ago and i had the same problem trying to restore it bak, i went to this site "droidviews(dot)com/how-to-install-latest-official-firmware-on-samsung-galaxy-s4-all-models/comment-page-4/" and i scroll down to where it said "where to download the firmware for galaxy s4?" right below that you should see sch-i545 and it also have a note to it, download that zip file "sch-i545_vzw_1_20130613171315_24s13crny1_fac.zip" and unzip it and u should be able to restore it bak to stock on odin.
Click to expand...
Click to collapse
oh my god ur a life saver
?
Just a quick question, when installing that zip with ODIN, do you just use PDA?
Stijntje09 said:
Just a quick question, when installing that zip with ODIN, do you just use PDA?
Click to expand...
Click to collapse
Yes. Make sure that auto reboot and reset time are checked. Load the zip/tar using PDA and let Odin do its thing.
thank it work with odin
shadowshin said:
i brick mine two days ago and i had the same problem trying to restore it bak, i went to this site "droidviews(dot)com/how-to-install-latest-official-firmware-on-samsung-galaxy-s4-all-models/comment-page-4/" and i scroll down to where it said "Where to Download the Firmware for Galaxy S4?" right below that you should see SCH-I545 and it also have a Note to it, download that zip file "SCH-I545_VZW_1_20130613171315_24s13crny1_fac.zip" and unzip it and u should be able to restore it bak to stock on Odin.
Click to expand...
Click to collapse
I brick my verizon galaxy nexus and now thank to this im working agains thank
Ok just got replacement S6 edge had D0l1 firmware on it out the box...flashed unikernel in ODIN on it for root....booted just fine and had root...then flashed latest TWRP through ODIN tried to reboot into recovery Now phone won't boot. if I force a restart it does Sammy logo then a white flash real quick to black screen followed by a vibrate then just stays black. Only thing I can do is get it in DL mode.
Now I have tried to DL the D0l1 Firmware from 2 different sources on here at XDA so I can ODIN back to stock but can't get Odin to recongize the zip.....so I extracted the files but says something is corrupt?. I am not a noobie when it comes to rooting and flashing and this is the deepest of trouble I have ever been in as far as Bricking a device. I have no clue what to do now???? Any help please!
Honestly, all I need is the D0l1 firmware which I cannot somehow get without it being a corrupt file
I just don't get it.....Odin will not recongize the D0l1 firmware for me to flash? I just Odin'd back my other S6 edge with broken screen to send back for insurance claim no problem with c09 firmware or the # before this D0l1. 3 different download sources same thing Odin will not see the zip file after clicking on AP.
I can' boot into recovery..does anybody have the stock recovery for tmobile that I can flash in ODIN??
Did you unlock the bootloader yet?
The Sickness said:
Did you unlock the bootloader yet?
Click to expand...
Click to collapse
How can I do it if I can't boot the phone?
Then you need to flash the stock ob1 firmware.
Can you get into dl mode?
The Sickness said:
Then you need to flash the stock ob1 firmware.
Can you get into dl mode?
Click to expand...
Click to collapse
Yes DL mode is the only thing I can get into...can you link me or get the file I need to flash in ODIN? bro I really need to have a working phone by tomorrow as I work from it! SMH....
http://www.sammobile.com/firmwares/download/56138/G920TUVU3DOI1_G920TTMB3DOI1_TMB/
The Sickness said:
http://www.sammobile.com/firmwares/download/56138/G920TUVU3DOI1_G920TTMB3DOI1_TMB/
Click to expand...
Click to collapse
Ok I tried to DL the D0l1 firmware from couple other places on here and when I unzipp it Winrar is popping up message saying the the file is corrupt but it unzips anyway then when I flash in ODIn it says Fail....not sure if that's because of the file or this new bootloader from Sammy is ****ing things up for people like us? I'm staring to get nervous....this DL from Sammy is gonna be a long time.
Also, I just noticed they have ODIN 3.10.7 out.....gonna DL that also as I have 3.10.6 still. see if that helps at all.
Yes...the dl will take a minute. If possible just leave your pc alone while it downloads.
If Winrar says its corrupted then it is. No sense in trying to flash it
The Sickness said:
http://www.sammobile.com/firmwares/download/56138/G920TUVU3DOI1_G920TTMB3DOI1_TMB/
Click to expand...
Click to collapse
OK, so I downloaded the file but like I said earlier (this is weird) When I unzip this file.....Winrar pops up and says the (archive is corrupt) but it unzips anyway but takes longer than your average file to unzip.....load it up in ODIN and when I start it goes through process and just fails? what can I do now?
How can the file be corrupted straight from Sammy???
Is there anyway you can get me the file already unzipped not saying it was corrupted?
I can upload the file. But it will take a while
The Sickness said:
I can upload the file. But it will take a while
Click to expand...
Click to collapse
Bro....I think I might be ****ed honestly, I hope not but it seems like if you get stuck in a BL with this new loader....it will not let you flash a stock image. My phone says in red at top when I force a restart (Recovery is not seadroid) I tried extracting just the recovery out of the D0l1 firmware and packed it up as a TAR and flashed but it just hangs and never completes the process. I have searched google to the end of the earth about trying to recover after this new firmware update but can't anything or anybody successful....just people stuck like me. Wish I would have just let it go and rolled stock cause I was gonna jump to the nexus probley.....but you and some others showed you were rooted and good....it all went downhill after odin'd TWRP
Your fine....my upload will take awhile. Its the tar file. So all you will have to do is flash in Odin
Your stuck because you didn't unlock the bootloader. If you get into download mode then your going to be ok. So just kick back for a few hours until my upload us done
The Sickness said:
Your fine....my upload will take awhile. Its the tar file. So all you will have to do is flash in Odin
Your stuck because you didn't unlock the bootloader. If you get into download mode then your going to be ok. So just kick back for a few hours until my upload us done
Click to expand...
Click to collapse
Mannnnnnnn, I hope your right....I have got myself out of these jams a bunch of times but this one seems lost.
I will post the link in the morning
The Sickness said:
I will post the link in the morning
Click to expand...
Click to collapse
ok, I'm at work till 5pm so I won't be able to try it till after that......thanks.
https://www.androidfilehost.com/?fid=24052804347846570
The Sickness said:
https://www.androidfilehost.com/?fid=24052804347846570
Click to expand...
Click to collapse
Thanks, gonna DL now then try to flash in ODIN....Did you check if it said corrupt after unzipping?
Ok just tried it.................ugh same thing.
sboot.bin
nand write start!!
failed!
complete (write) operation failed!
IDK what to do bro.....****ing $800 paperweight till someone figures this bull**** new bootloader out.