S6 edge (g925F) totally bricked - Galaxy S6 Edge Q&A, Help & Troubleshooting

Hi, Im writting this threat to solve a problem with my s6 edge. Two weeks ago I bought a phone from Aliexpress, and when it came everithing was okey, it came with 5.1.1, so i decided to upgrade to 6.0.1. How the phone was new and i had no idea about which rom install I installed the 5 files rom XEU without making a backup of the EFS folder. After install it, the phone worked, but it wasn´t able to make calls or recieve SMS, the phone said "no registered on network". I tried to solve this problem installing a modem, but this aggravate the problem, appearing a prohibited sign in the status bar and with the IMEI and Baseband unknown. I tried to install another roms, but odin always failed, the only rom that odin let me install is the AP file of the 5 files XEU rom. I sent the phone to the Samsung technical service, and the said me that they can´t repair the phone because the phone is from Israel, and they only repair EU phone. The phone works, everything is okey but it can´t use the network services. How the technical service said me the phone is from Israel, and it came (if im not wrong) with this rom: "G925FXXU3COJ1_G925FOJK3COJ3_ILO" (5.1.1 rom from Israel), but now the only rom that works is "AP_G925FXXS3DPB1_CL7025264_QB8758701_REV02_user_low_ship.tar.md5" (the AP file from the 5 files 6.0.1 XEU rom). I don´t know how to solve the problem, the phone is totally new, and when I try to install any rom Odin gets fail. Can anybody help me? Is the first time I buy a good phone and on the third day it gets broken. Any solution? Please help me, thanks. (Sorry for my bad English, I´m from Spain)

jujomar said:
Hi, Im writting this threat to solve a problem with my s6 edge. Two weeks ago I bought a phone from Aliexpress, and when it came everithing was okey, it came with 5.1.1, so i decided to upgrade to 6.0.1. How the phone was new and i had no idea about which rom install I installed the 5 files rom XEU without making a backup of the EFS folder. After install it, the phone worked, but it wasn´t able to make calls or recieve SMS, the phone said "no registered on network". I tried to solve this problem installing a modem, but this aggravate the problem, appearing a prohibited sign in the status bar and with the IMEI and Baseband unknown. I tried to install another roms, but odin always failed, the only rom that odin let me install is the AP file of the 5 files XEU rom. I sent the phone to the Samsung technical service, and the said me that they can´t repair the phone because the phone is from Israel, and they only repair EU phone. The phone works, everything is okey but it can´t use the network services. How the technical service said me the phone is from Israel, and it came (if im not wrong) with this rom: "G925FXXU3COJ1_G925FOJK3COJ3_ILO" (5.1.1 rom from Israel), but now the only rom that works is "AP_G925FXXS3DPB1_CL7025264_QB8758701_REV02_user_low_ship.tar.md5" (the AP file from the 5 files 6.0.1 XEU rom). I don´t know how to solve the problem, the phone is totally new, and when I try to install any rom Odin gets fail. Can anybody help me? Is the first time I buy a good phone and on the third day it gets broken. Any solution? Please help me, thanks. (Sorry for my bad English, I´m from Spain)
Click to expand...
Click to collapse
Have You tried restoring ur phone with samsung smart switch ??
Bt U should have backed up the efs Anyway Try Smart Switch Maybe Ur Phone will bootup
Good Luck

osman34 said:
Have You tried restoring ur phone with samsung smart switch ??
Bt U should have backed up the efs Anyway Try Smart Switch Maybe Ur Phone will bootup
Good Luck
Click to expand...
Click to collapse
Yes I have tried with Samsung Smart Switch, but Nothing, it don't let me restore the phone

Try flashing a firmware with the number 4
For example I flashed with G925FXXU4DPGW
If you try to flash with a firmware with 3 in the place of 4 it might not work. So try it.

jujomar said:
Hi, Im writting this threat to solve a problem with my s6 edge. Two weeks ago I bought a phone from Aliexpress, and when it came everithing was okey, it came with 5.1.1, so i decided to upgrade to 6.0.1. How the phone was new and i had no idea about which rom install I installed the 5 files rom XEU without making a backup of the EFS folder. After install it, the phone worked, but it wasn´t able to make calls or recieve SMS, the phone said "no registered on network". I tried to solve this problem installing a modem, but this aggravate the problem, appearing a prohibited sign in the status bar and with the IMEI and Baseband unknown. I tried to install another roms, but odin always failed, the only rom that odin let me install is the AP file of the 5 files XEU rom. I sent the phone to the Samsung technical service, and the said me that they can´t repair the phone because the phone is from Israel, and they only repair EU phone. The phone works, everything is okey but it can´t use the network services. How the technical service said me the phone is from Israel, and it came (if im not wrong) with this rom: "G925FXXU3COJ1_G925FOJK3COJ3_ILO" (5.1.1 rom from Israel), but now the only rom that works is "AP_G925FXXS3DPB1_CL7025264_QB8758701_REV02_user_low_ship.tar.md5" (the AP file from the 5 files 6.0.1 XEU rom). I don´t know how to solve the problem, the phone is totally new, and when I try to install any rom Odin gets fail. Can anybody help me? Is the first time I buy a good phone and on the third day it gets broken. Any solution? Please help me, thanks. (Sorry for my bad English, I´m from Spain)
Click to expand...
Click to collapse
Just flash the stock firmware for your region.
Or try to flash stock XEU or BTU. Most international firmwares and multi csc firmwares come with efs or modem files.
If you are trying to flash a branded firmware this could be why as this happened when I tried to flash EVR rom.
I can link you to the stock XEU download that I'm using.
If you get an fail in odin let me know where it fails... example hidden.img fail or system.img fail.

callumbr1 said:
Just flash the stock firmware for your region.
Or try to flash stock XEU or BTU. Most international firmwares and multi csc firmwares come with efs or modem files.
If you are trying to flash a branded firmware this could be why as this happened when I tried to flash EVR rom.
I can link you to the stock XEU download that I'm using.
If you get an fail in odin let me know where it fails... example hidden.img fail or system.img fail.
Click to expand...
Click to collapse
Hi Callumbr1, I´ve tried to install the 5.1.1 rom of my country (spain), but Odin gets fail, at first it fails at "cm.bin" archive, so I deleted it from the tar archive, then I flash the rom again and another Odin problem, it failed at "hidden.img", so I also deleted it from the tar archive, afterwards I flash again and another odin problem at "sboot.bin" (this sboot archive always fail when I try to flash a rom), so I also deleted it. After having removed the 3 archives from the original tar archive (the rom was G925FXXU3COI9_G925FPHE3COI6_PHE), the rom started to flash normally but after it the phone gets stuck on Samsung galaxy S6 edge logo.
I also have tried to install the 5.1.1 XEU (G925FXXU3COI9_G925FOXA3COI9_XEU), but also same problem at "hidden.img" and at "sboot.bin", after deleting them, another bootloop. What can I do? Maybe I have to start trying to flash 6.0.1 roms, I will also try to flash roms with number 4 how Subhy259 said. What do you think Callumbr1, what can I do?

jujomar said:
Hi Callumbr1, I´ve tried to install the 5.1.1 rom of my country (spain), but Odin gets fail, at first it fails at "cm.bin" archive, so I deleted it from the tar archive, then I flash the rom again and another Odin problem, it failed at "hidden.img", so I also deleted it from the tar archive, afterwards I flash again and another odin problem at "sboot.bin" (this sboot archive always fail when I try to flash a rom), so I also deleted it. After having removed the 3 archives from the original tar archive (the rom was G925FXXU3COI9_G925FPHE3COI6_PHE), the rom started to flash normally but after it the phone gets stuck on Samsung galaxy S6 edge logo.
I also have tried to install the 5.1.1 XEU (G925FXXU3COI9_G925FOXA3COI9_XEU), but also same problem at "hidden.img" and at "sboot.bin", after deleting them, another bootloop. What can I do? Maybe I have to start trying to flash 6.0.1 roms, I will also try to flash roms with number 4 how Subhy259 said. What do you think Callumbr1, what can I do?
Click to expand...
Click to collapse
What firmware was you on before? Was it 6.0.1? Is so you have to flash a 6.0.1 rom. You can't flash from 6.0.1 to 5.1.1.
Hidden.img fail means you need pit file for partitions.
Was the device unlocked when you got it? It could have locked bootloader which means you will have to flash the firmware it came with.
http://www.sammobile.com/firmwares/download/85917/G925FXXU4DPGW_G925FOXA4DPGW_XEU/
Flash this firmware see if this works. It's multi csc European so should work.
If you get any errors copy the odin log to here so I can see. The good news is its not bricked. We just need to find the firmware that will flash

callumbr1 said:
What firmware was you on before? Was it 6.0.1? Is so you have to flash a 6.0.1 rom. You can't flash from 6.0.1 to 5.1.1.
Hidden.img fail means you need pit file for partitions.
Was the device unlocked when you got it? It could have locked bootloader which means you will have to flash the firmware it came with.
http://www.sammobile.com/firmwares/download/85917/G925FXXU4DPGW_G925FOXA4DPGW_XEU/
Flash this firmware see if this works. It's multi csc European so should work.
If you get any errors copy the odin log to here so I can see. The good news is its not bricked. We just need to find the firmware that will flash
Click to expand...
Click to collapse
Callumbr1 I´ve alrready installed the rom you said (without any problem) and now the phone detects the sim and has the correct IMEI and S/N, but when I try to call or use the network the phone says "Not registered on network", why is this happening? How can I solve this? It´s a modem problem?

jujomar said:
Callumbr1 I�´ve alrready installed the rom you said (without any problem) and now the phone detects the sim and has the correct IMEI and S/N, but when I try to call or use the network the phone says "Not registered on network", why is this happening? How can I solve this? It�´s a modem problem?
Click to expand...
Click to collapse
Go on to settings then reset. Reset network settings. then go onto mobile networks, set to LTE/3g/2g. Set work network to auto. Reboot phone and should work
Or set the network to the same as your sim

callumbr1 said:
Go on to settings then reset. Reset network settings. then go onto mobile networks, set to LTE/3g/2g. Set work network to auto. Reboot phone and should work
Or set the network to the same as your sim
Click to expand...
Click to collapse
I've tried that but still on "Not registered on network" (it should be a phone problem because the sim works in other phones), I think it's a modem problem, maybe flashing the modem of another rom could work. What do you think?

jujomar said:
I've tried that but still on "Not registered on network" (it should be a phone problem because the sim works in other phones), I think it's a modem problem, maybe flashing the modem of another rom could work. What do you think?
Click to expand...
Click to collapse
I would say to flash a firmware that is branded by the network you have.

callumbr1 said:
I would say to flash a firmware that is branded by the network you have.
Click to expand...
Click to collapse
How do I know which firmware is branded with the network I have?

jujomar said:
How do I know which firmware is branded with the network I have?
Click to expand...
Click to collapse
What is your sim network? And region?

callumbr1 said:
What is your sim network? And region?
Click to expand...
Click to collapse
My SIM operator is Orange and my region is Spain. I have tried to install the last 6.0.1 Spanish and the rom was almost flashed when Odin failed at hidden.img ://

jujomar said:
My SIM operator is Orange and my region is Spain. I have tried to install the last 6.0.1 Spanish and the rom was almost flashed when Odin failed at hidden.img ://
Click to expand...
Click to collapse
Download this app...
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Send me screen shots of the general, csc and firmware page.
Once I find this I can tell you what pit file you need to flash

callumbr1 said:
Download this app...
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
Send me screen shots of the general, csc and firmware page.
Once I find this I can tell you what pit file you need to flash
Click to expand...
Click to collapse
Looks like this

callumbr1 said:
Looks like this
Click to expand...
Click to collapse
That's the photo

subhy259 said:
Try flashing a firmware with the number 4
For example I flashed with G925FXXU4DPGW
If you try to flash with a firmware with 3 in the place of 4 it might not work. So try it.
Click to expand...
Click to collapse
It worked, now the phone has correct IMEI and Baseband but says "Not registered on network", any idea?

jujomar said:
That's the photo
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...it-files-multi-thread-download-t3171636/page1
Look at this thread. You need the top pit file zerolte_eur_open.pit
In odin you need to insert the firmware into AP again and click on pit where the options are. Insert the downloaded pit file and make sure re partition and f.reset is checked and then flash.

callumbr1 said:
http://forum.xda-developers.com/gal...it-files-multi-thread-download-t3171636/page1
Look at this thread. You need the top pit file zerolte_eur_open.pit
In odin you need to insert the firmware into AP again and click on pit where the options are. Insert the downloaded pit file and make sure re partition and f.reset is checked and then flash.
Click to expand...
Click to collapse
(I forgot some photos) I'll try what you say

Related

How to switch back from I9100XXLP6 ## to 2.3.6?

Hello,
I just flashed with odin the new ICS firmware out on sammobile for sgs2 (I9100XXLP6 ##) which came with a file for PDA, for CSC and for Phone, but now that I am trying to flash again any 2.3.6. firmware I keep getting errors already at the start when associating my google account and stuff...
I assume that is because of the additional CSC and PHONE file that was included in I9100XXLP6 ## but I don´t know where to find the refering files for 2.3.6. firmwares since these only come with 1 file (for PDA)...
I would be glad for any help I can get
Hi,
Could you give more information about the errors? At what point do they occur? What errors do you get?
The csc files can be found somewhere on xda, use the search function. The file you need for the phone is called a modem, can also be found on xda.
Although I do not expect that this causes the errors, how did you restore? Did you while your phone and cache first?
Sent from my GT-I9100 using XDA App
What 2.3.6 rom are u trying to flash on?
If the DL was dodgy it would cause problems, redownload and reflash
PIT: if included, also optional
PDA:Code
Phone:modem
CSC:multi csc
Did you do a full wipe?
Sent from my GT-I9100 using XDA App
Make sure you are back on the GB boot loaders and that you have done a full wipe.
Sent from my GT-I9100 using Tapatalk
htt p://1 15.com/file/dnrgfjhq
here have the rom of 2.3.6
there have pit,pda ,phone,csc
i tested it,it works
first of all,this website is come from china
you need delete the spacebar
dotdoms said:
Hello,
I just flashed with odin the new ICS firmware out on sammobile for sgs2 (I9100XXLP6 ##) which came with a file for PDA, for CSC and for Phone, but now that I am trying to flash again any 2.3.6. firmware I keep getting errors already at the start when associating my google account and stuff...
I assume that is because of the additional CSC and PHONE file that was included in I9100XXLP6 ## but I don´t know where to find the refering files for 2.3.6. firmwares since these only come with 1 file (for PDA)...
I would be glad for any help I can get
Click to expand...
Click to collapse
greetings hello I commented that the same thing happened to me the only thing I do is flash with this version XWKK5
follow these steps:
1.Install again (XXLP6) completely.
2.turn off the phone and enter download mode and install the (XWKK5).
3. Once you install the XWKK5 completely. turn off the phone and go into recovery mode and perform the wipes
I hope to help and luck.
I hope you understand me and sorry but my English is a bit bad jejjee
I flashed this update, throuch odin, and now the phone will only boot into download mode or the screen that says to use kies recovery. The problem is, even though I can boot into download mode, the computer no longer recognizes my phone. No sounds when I plug it in or anything. If I plug a jig in, it will come on so it's not the port. Can someone help me?
rogermhoffmanjr said:
I flashed this update, throuch odin, and now the phone will only boot into download mode or the screen that says to use kies recovery. The problem is, even though I can boot into download mode, the computer no longer recognizes my phone. No sounds when I plug it in or anything. If I plug a jig in, it will come on so it's not the port. Can someone help me?
Click to expand...
Click to collapse
Did you have KIES running while flashing?
No I did not
Did you do a full wipe ? wipe cache?
dotdoms said:
but now that I am trying to flash again any 2.3.6. firmware I keep getting errors already at the start when associating my google account and stuff...
I assume that is because of the additional CSC and PHONE file that was included in I9100XXLP6 ## but I don´t know where to find the refering files for 2.3.6. firmwares since these only come with 1 file (for PDA)...
Click to expand...
Click to collapse
You need a three part firmware, with modem, csc and pda, flash with pit and repartition, to do a full wipe. I think you used a non wipe firmware, that's the reason for the bugs.
Question
When you flashed the LP6, did you flash it with the .pit file too? I suggest you flash back to your stock ROM but you also have to flash a .pit file as well. This happened to me too when I flashed the KP8 ROM. I reflashed my stock ROM but it kept giving me errors at the initial boot. So I flashed my stock ROM again this time with the same .pit file. If I'm not mistaken it's this: u1_02_20110310_emmc_EXT4.pit
dotdoms said:
Hello,
I just flashed with odin the new ICS firmware out on sammobile for sgs2 (I9100XXLP6 ##) which came with a file for PDA, for CSC and for Phone, but now that I am trying to flash again any 2.3.6. firmware I keep getting errors already at the start when associating my google account and stuff...
I assume that is because of the additional CSC and PHONE file that was included in I9100XXLP6 ## but I don´t know where to find the refering files for 2.3.6. firmwares since these only come with 1 file (for PDA)...
I would be glad for any help I can get
Click to expand...
Click to collapse
Did you get the 2.3.6 firmware? If not look at this thread from Infratech: http://forum.xda-developers.com/showthread.php?t=1075278. Have a good look at the section marked "Individual CSC Packages". Maybe this could help if you suspect a wrong CSC being the cause of your problem.

[Q] Stock Firmware...now "CSC : unknown"

Hello,
I put the stock firmware of my S3 for the waranty but now I have an "CSC : unknown"
I have tried many firmware but can not restore the situation !!
Do you have an idea?
Thank you in advance
go to the phone dialer and input : *#272*(IMEI)#
Then choose your default CSC.
The phone will reboot and reformat your phone, so make sure all data has been backed up.
Thanks for your reply..but i have only one CSC "AUT"
I try another stock firmware !
Stock roms thread CSC post flash CSC .
jje
shinichi_c00l said:
go to the phone dialer and input : *#272*(IMEI)#
Then choose your default CSC.
The phone will reboot and reformat your phone, so make sure all data has been backed up.
Click to expand...
Click to collapse
I tried this when I used the suggested firmware downloaded from Fuscheck (BTU) I'm on O2.
When I typed it in on the keypad I got BTU displayed, clicked it and install, then I got an error saying something like 'must be at least THREE'
It won't install I managed to resolve the situation by downloading and flashing a firmware from Sam-Mobile, but I don't understand my issue, every time I want to upgrade my firmware I have to completely wipe the phone,. (OK I have titanium backup) but that's not the point. Surely there is a way of ODIN flashing a new firmware then re-rooting, without factory reset every time.
Is Fuscheck the best place to get the firmware upgrade?
Any suggestions/ ideas on my situation would be grateful, I can't really be spending half a day trying to unbrick the phone every time there's a update
Joe
You can download roms from www.sammobile.com/firmware. Thats where I get them from. Install with Odin v3 3.0.4.
If you are rooted you can flash firmware with Mobile Odin Pro and keep root.
Sent from my GT-I9300 using xda premium
gee2012 said:
You can download roms from Thats where I get them from. Install with Odin v3 3.0.4.
If you are rooted you can flash firmware with Mobile Odin Pro and keep root.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks for that. Helpful post.
I normally use Odin on my PC, and just flash through PDA.
I am rooted so is it just a case of flashing firmware from Sammobile then rooting the phone again (I use CF Root)

Bricked Galaxy S4 GT-I9506

***Problem Solved***
Hi experts,
My Galaxy S4 GT-I9506 is bricked with this error:
image 1 (attached)
It doesn't go to recovery mode anymore now!!!
First I tried to install custom Rom to root it with Odin, it did seem fine with "green pass" but didn't actually install any recovery mode (there wasn't any install option in recovery mode, there were only update options), nothing happened to phone at all and it worked normal.
Second i wiped the phone and cache and I download the firmware from Samsung website.
and after try to install, it failed in Odin:
Images 2 & 3 (attached)
I'm not sure but I think it was a wrong firmware, because I bought my phone online (kogan.com i think it is in Hongkong) and I downloaded the Australia Vodafone firmware (as I'm using Vodafone sim card).
anyone can help me?!
I should mention that phone doesn't go to recovery mode, failed in Odin, Kies can not fix it! the drivers all are up to date and no Antivirus runs in my PC.
Please someone help me.
Thanks & regards
Tesius
Go to samfirmware.com and download the latest firmware for your phone, try using that in odin
johndroid1999 said:
Open Kies and go to the Tools menu and click on Firmware initialization, enter your model name and serial number(under the battery). It will get you back to stock firmware
Click to expand...
Click to collapse
Kies can not fix it!
Tesius said:
Kies can not fix it!
Click to expand...
Click to collapse
Try samfirmware.com and odin then.
johndroid1999 said:
Try samfirmware.com and odin then.
Click to expand...
Click to collapse
did u really read my post?
failed in odin, kies can not support the device, no recovery mode...
Make sure your firmware downloaded right, because it is saying it is corrupt. (redownload and rerun Odin).
Tesius said:
did u really read my post?
failed in odin, kies can not support the device, no recovery mode...
Click to expand...
Click to collapse
i think your rom is currupted or half downloaded
redownload the rom from sammobile com and reflash the rom
Vaibhav Chauhan said:
i think your rom is currupted or half downloaded
redownload the rom from sammobile com and reflash the rom
Click to expand...
Click to collapse
Did you find any solution since?
I am facing the same issues and despite trying a few things, I am still stuck...
stephaned said:
Did you find any solution since?
I am facing the same issues and despite trying a few things, I am still stuck...
Click to expand...
Click to collapse
have you try to re download the rom?
stephaned said:
Did you find any solution since?
I am facing the same issues and despite trying a few things, I am still stuck...
Click to expand...
Click to collapse
The ROM was wrong, it was hard to find out which country my phone came from but i did need to use the ROM for the country the phone comes from...
Tesius said:
The ROM was wrong, it was hard to find out which country my phone came from but i did need to use the ROM for the country the phone comes from...
Click to expand...
Click to collapse
Tks - I have tried many ROMs from different counties (other ROM or even Kernel, etc...) and upload does not seem to work in ODIN. When you find the right country ROM, did it suddenly work in ODIN?
stephaned said:
Tks - I have tried many ROMs from different counties (other ROM or even Kernel, etc...) and upload does not seem to work in ODIN. When you find the right country ROM, did it suddenly work in ODIN?
Click to expand...
Click to collapse
yes, there are different operator in one country, first u have to find out in which operator of which country your phone is supported, then download the ROM from sammobile, make sure of using last version of Odin, and maybe it takes longer than u expects, for me last about 9min to get the Pass sign...
i had the same problem..so try downloading GT-I9506_501_Stock-Recovery_XXUDOF2 that file from internet and extract..and then flash it using odin..it worked for my s4 gti 9506...

Am i hard bricked?

Am I hard bricked?
I accidently tried flashing the wrong rom onto my phone.
Now it says to use samsung emergency recovery, which doesnt work.
I lost the paper that had all the info about my phone on it..
Ive tried using ODIN to flash multiple different stock roms for the g925a and it always says FAIL.
Ive tried not flashing the boot loader.
Ive tried using the appropriate PIT
Tried different cables and usb ports as well.
edit: the phone was encrypted and had the reactivation lock on as well
Thanks for any replies
Hello,
Where can you boot ? Normal - Download - Recovery
Which PIT file have you flashed to your device ?
What was the ROM you flashed on your device ?
Where does Odin fails while flashing ?
iDroid27210 said:
Hello,
Where can you boot ? Normal - Download - Recovery
Which PIT file have you flashed to your device ?
What was the ROM you flashed on your device ?
Where does Odin fails while flashing ?
Click to expand...
Click to collapse
ODIN mode only
ZEROLTE_USA_ATT - Tried with, and without
OE2, OF3, OCE, OJ9,BOI2 stock i have tried them all to no avail
Sadly I dont know what ROM was originally on the phone, I lost that paper with the info..
Odin will fail at different files, like sboot and others. Ive tried flashing with BL and without.
Thank you
c19o said:
ODIN mode only
ZEROLTE_USA_ATT - Tried with, and without
OE2, OF3, OCE, OJ9,BOI2 stock i have tried them all to no avail
Sadly I dont know what ROM was originally on the phone, I lost that paper with the info..
Odin will fail at different files, like sboot and others. Ive tried flashing with BL and without.
Thank you
Click to expand...
Click to collapse
Oh, you have got the phone like that?
Mm... Use SamFirm to download a full-wipe firmware (binary nature ticked).
Flash firmware with your PIT with Repart and Nand Erase All ticked in Odin
iDroid27210 said:
Oh, you have got the phone like that?
Mm... Use SamFirm to download a full-wipe firmware (binary nature ticked).
Flash firmware with your PIT with Repart and Nand Erase All ticked in Odin
Click to expand...
Click to collapse
I tried flashing all of those stock firmwares above after it bricked and none seem to work.
Your program says "could not fetch info"
Im guessing I just havent got the right firmware to flash and I dont know what to use because I lost that paper with all the phones info.
What's your model and country ?
Have you put infos about device on SamFirm ?
iDroid27210 said:
What's your model and country ?
Have you put infos about device on SamFirm ?
Click to expand...
Click to collapse
SM-G925A bought in the US from the carrier "ATT".
Yes I tried SamFirm, it doesnt work for me. Unless I got the country code wrong.
Oh... If you have the AT&T version there's only the AT&T version.
Put "ATT" for the region.
iDroid27210 said:
Oh... If you have the AT&T version there's only the AT&T version.
Put "ATT" for the region.
Click to expand...
Click to collapse
I am using SM-G925A and ATT.
Could not fetch info
Bump
You can boot into download mode on the phone?
Holding the volume down and power button at the same time? If so..
Use kies air, it will say that the phone is unsupported but still navigate to emergency firmware upgrade and put in the device model and S/N number located on the back of the phone or on the box, hope this works for you
Jigsaw350 said:
You can boot into download mode on the phone?
Holding the volume down and power button at the same time? If so..
Use kies air, it will say that the phone is unsupported but still navigate to emergency firmware upgrade and put in the device model and S/N number located on the back of the phone or on the box, hope this works for you
Click to expand...
Click to collapse
I appreciate the help, but Ive tried that, and Smart Switch too. Just gives me an error after entering the serial number.

S9+ One UI manual update questions

Hi!,
I have an S9+ duos version and still have to received the androp p update. Actually I've never received any update since i bought the phone last Year June.
I would like to know what should I check for if im downloading the os and installing it through odin.
Will installing theough odin trip knox?
Can the knox counter be untripped?
Please help guys. New to the whole thing (obviously ?)
flashing stock ROM using odin will not trip knox
make sure to flash the ROM for the same model
Stock Firmware Help
I've downloaded an android 9 firmware before it came to my phone model (SM-G965F/DS) and flashed it. When I check under Software Update in settings it says "Your current software version isn't supported visit a service center".
Is there a way to go back to the factory firmware it came with through smart switch or.... how do i find the correct firmware to flash with odin? Because i dont have any version details from before...
Please help!
breakneck001 said:
I've downloaded an android 9 firmware before it came to my phone model (SM-G965F/DS) and flashed it. When I check under Software Update in settings it says "Your current software version isn't supported visit a service center".
Is there a way to go back to the factory firmware it came with through smart switch or.... how do i find the correct firmware to flash with odin? Because i dont have any version details from before...
Please help!
Click to expand...
Click to collapse
I believe as long as you do a full clean flash, the software update will function normally. By full clean flash I mean flashing the CSC and not HOME_CSC, and flashing userdata if that was included in your firmware, although I'm not sure if that part affects this or not. But the CSC, which will wipe your data by the way, should set everything straight I believe. It has worked for me.
YrrchSebor said:
I believe as long as you do a full clean flash, the software update will function normally. By full clean flash I mean flashing the CSC and not HOME_CSC, and flashing userdata if that was included in your firmware, although I'm not sure if that part affects this or not. But the CSC, which will wipe your data by the way, should set everything straight I believe. It has worked for me.
Click to expand...
Click to collapse
Sorry im not familiar on how to do it. Can you pks please let me know how that is done?
breakneck001 said:
Sorry im not familiar on how to do it. Can you pks please let me know how that is done?
Click to expand...
Click to collapse
Oh, you said you flashed the firmware package, so did it have four or five different files inside the package, like AP, BL, CSC etc? You put each file in the respective slot in Odin, and instead of using HOME_CSC, use CSC, which will wipe your data but it will line up the customer code with the firmware so that updates should work as normal.
YrrchSebor said:
Oh, you said you flashed the firmware package, so did it have four or five different files inside the package, like AP, BL, CSC etc? You put each file in the respective slot in Odin, and instead of using HOME_CSC, use CSC, which will wipe your data but it will line up the customer code with the firmware so that updates should work as normal.
Click to expand...
Click to collapse
Oh ok. Thank you so much! Will try it out and update. :good:
YrrchSebor said:
Oh, you said you flashed the firmware package, so did it have four or five different files inside the package, like AP, BL, CSC etc? You put each file in the respective slot in Odin, and instead of using HOME_CSC, use CSC, which will wipe your data but it will line up the customer code with the firmware so that updates should work as normal.
Click to expand...
Click to collapse
@YrrchSebor it worked! Thanks again :good::good::good:
breakneck001 said:
@YrrchSebor it worked! Thanks again :good::good::good:
Click to expand...
Click to collapse
You're welcome, thanks for the good news ?

Categories

Resources