[Q] Stock Firmware...now "CSC : unknown" - Galaxy S III Q&A, Help & Troubleshooting

Hello,
I put the stock firmware of my S3 for the waranty but now I have an "CSC : unknown"
I have tried many firmware but can not restore the situation !!
Do you have an idea?
Thank you in advance

go to the phone dialer and input : *#272*(IMEI)#
Then choose your default CSC.
The phone will reboot and reformat your phone, so make sure all data has been backed up.

Thanks for your reply..but i have only one CSC "AUT"
I try another stock firmware !

Stock roms thread CSC post flash CSC .
jje

shinichi_c00l said:
go to the phone dialer and input : *#272*(IMEI)#
Then choose your default CSC.
The phone will reboot and reformat your phone, so make sure all data has been backed up.
Click to expand...
Click to collapse
I tried this when I used the suggested firmware downloaded from Fuscheck (BTU) I'm on O2.
When I typed it in on the keypad I got BTU displayed, clicked it and install, then I got an error saying something like 'must be at least THREE'
It won't install I managed to resolve the situation by downloading and flashing a firmware from Sam-Mobile, but I don't understand my issue, every time I want to upgrade my firmware I have to completely wipe the phone,. (OK I have titanium backup) but that's not the point. Surely there is a way of ODIN flashing a new firmware then re-rooting, without factory reset every time.
Is Fuscheck the best place to get the firmware upgrade?
Any suggestions/ ideas on my situation would be grateful, I can't really be spending half a day trying to unbrick the phone every time there's a update
Joe

You can download roms from www.sammobile.com/firmware. Thats where I get them from. Install with Odin v3 3.0.4.
If you are rooted you can flash firmware with Mobile Odin Pro and keep root.
Sent from my GT-I9300 using xda premium

gee2012 said:
You can download roms from Thats where I get them from. Install with Odin v3 3.0.4.
If you are rooted you can flash firmware with Mobile Odin Pro and keep root.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks for that. Helpful post.
I normally use Odin on my PC, and just flash through PDA.
I am rooted so is it just a case of flashing firmware from Sammobile then rooting the phone again (I use CF Root)

Related

Can't flash with ODIN - PLEASE help!

Spent a frustrating day trying to sort this so I'm posting here as a last resort as I'm at the end of my tether!!
So. Was browsing the marketplace(new style) and my phone crashed and then would not reboot. It would only go as far as the Samsung Galaxy S2 screen. so I took out the battery and half an hour later returned to see if all was well when I reinserted the battery. It wasn't. I should point out at this point that I was happily using the latest MIUI and appart from the occasional reboot all was well. When reinserting the battery did not work I tried to reboot into CWM but found that I could not. I can however reboot into download mode so have been trying to reflash my phone using that. However I can't get past factoryfs.img! It just stops there every time! Tried :
Usb Jig
Different USB ports
Restart computer
Reinstalling Kies drivers
A different version of ODIN
Many different ROM files (including Litening 1.5 which I know works from a previous flash)
Re downloading various ROMs in case the download was dodgy
Please, please help. I just don't know what to do now
Im thinking its very possible that something in your phone fried and the only option you have is service.. From the way you describe things as not advancing past factory fs.
You make no mention of flashing a stock rom via Odin .That is the normal method of recovery.
jje
Sent from my GT-I9100 using XDA Premium App
Strange if true - I've never overclocked or anything!! Is there nothing else I can try?
JJEgan said:
You make no mention of flashing a stock rom via Odin .That is the normal method of recovery.
jje
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
Downloading stock ROM as we speak. Fingers crossed!!
Shafty said:
Downloading stock ROM as we speak. Fingers crossed!!
Click to expand...
Click to collapse
No joy - hangs on cache.img
Can any of the other odin check boxes help? I daren't use them in case they do more harm than good!!
Please help!!
Going to bed now after the most frustrating day of my life trying to get this sorted. Please, if anyone has any ideas then post them here. Thanks.
i have ony small tip for you. kill all the Kies proceses in the backround with the task manager - before flashing with odin. other then that i have no idea how to help u mate.
Hunteres said:
i have ony small tip for you. kill all the Kies proceses in the backround with the task manager - before flashing with odin. other then that i have no idea how to help u mate.
Click to expand...
Click to collapse
Thanks for the tip but I'm still having no joy at all. Downloaded a stock ROM but still get stuck at cache.img. Going to have a full night at it again tonight then it's going to have to go back
Any help with this evenings endeavours would be gladly received!
Thanks.
Flashing.
Shafty said:
Thanks for the tip but I'm still having no joy at all. Downloaded a stock ROM but still get stuck at cache.img. Going to have a full night at it again tonight then it's going to have to go back
Any help with this evenings endeavours would be gladly received!
Thanks.
Click to expand...
Click to collapse
Are you shure that you use all 4 files to flash with odin. My friend got similar problem stuck in the middle of flashing. But when i tried everything goes ok.
Im using odin 1.85
Regards
mcnaget said:
Are you shure that you use all 4 files to flash with odin. My friend got similar problem stuck in the middle of flashing. But when i tried everything goes ok.
Im using odin 1.85
Regards
Click to expand...
Click to collapse
What 4 files? Just putting one file in PDA at the moment?
Flashing.
Shafty said:
What 4 files? Just putting one file in PDA at the moment?
Click to expand...
Click to collapse
Thru odin you must use 4 files first you have to use pit- ext4 , then- pda , then- phone , and finaly csc.
You got all files here and do please read.
These are stock roms.
http://www.samfirmware.com/fwandroid.htm
mcnaget said:
Thru odin you must use 4 files first you have to use pit- ext4 , then- pda , then- phone , and finaly csc.
You got all files here and do please read.
These are stock roms.
http://www.samfirmware.com/fwandroid.htm
Click to expand...
Click to collapse
BEWARE DO NOT USE PIT NOR REPARTITION
Stock roms are flashed via ODIn as a single tar file in PDA in normal circumstances .
All the info is here .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Flashing.
JJEgan said:
BEWARE DO NOT USE PIT NOR REPARTITION
Stock roms are flashed via ODIn as a single tar file in PDA in normal circumstances .
All the info is here .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
I dont have any problems flashing thru odin with all 4 files stock rom , i have never flashing thru odin only pda file stock rom.
regards
Latest:
Unistalled Kies
Installed a newer Kies
Tried Odin 1.83 instead of 1.85
Since reinstalling Kies and reinstalling the drivers, my computer won't recognise the phone at all even in download mode. Might have to admit defeat soon
Flash this recovery package, which is XXKI3, 2.3.5, Open Europe http://hotfile.com/dl/130600047/b70801e/I9100XXKI3.rar.html
Tick the 3 top boxes (Re Partition, auto reboot and F.Reset time)
PIT -> PIT
CODE -> PDA
MODEM -> PHONE
CSC -> CSC
If that doesn't work or fails, flash this, which is a XXKI3 Kernel : http://www.multiupload.com/WDOO81L5H6. After that, re-flash the recovery package (with PIT and repartitiong, but be careful )
Report back if it doesn't work, and good luck!
If that doesn't work, flash the old bootloader : http://www.multiupload.com/LQQBRQVJUD in either the PDA or Bootloader section in ODIN. If that is successful, flash the Kernel again, and then the XXKI3 recovery package I gave you.

How to switch back from I9100XXLP6 ## to 2.3.6?

Hello,
I just flashed with odin the new ICS firmware out on sammobile for sgs2 (I9100XXLP6 ##) which came with a file for PDA, for CSC and for Phone, but now that I am trying to flash again any 2.3.6. firmware I keep getting errors already at the start when associating my google account and stuff...
I assume that is because of the additional CSC and PHONE file that was included in I9100XXLP6 ## but I don´t know where to find the refering files for 2.3.6. firmwares since these only come with 1 file (for PDA)...
I would be glad for any help I can get
Hi,
Could you give more information about the errors? At what point do they occur? What errors do you get?
The csc files can be found somewhere on xda, use the search function. The file you need for the phone is called a modem, can also be found on xda.
Although I do not expect that this causes the errors, how did you restore? Did you while your phone and cache first?
Sent from my GT-I9100 using XDA App
What 2.3.6 rom are u trying to flash on?
If the DL was dodgy it would cause problems, redownload and reflash
PIT: if included, also optional
PDA:Code
Phone:modem
CSC:multi csc
Did you do a full wipe?
Sent from my GT-I9100 using XDA App
Make sure you are back on the GB boot loaders and that you have done a full wipe.
Sent from my GT-I9100 using Tapatalk
htt p://1 15.com/file/dnrgfjhq
here have the rom of 2.3.6
there have pit,pda ,phone,csc
i tested it,it works
first of all,this website is come from china
you need delete the spacebar
dotdoms said:
Hello,
I just flashed with odin the new ICS firmware out on sammobile for sgs2 (I9100XXLP6 ##) which came with a file for PDA, for CSC and for Phone, but now that I am trying to flash again any 2.3.6. firmware I keep getting errors already at the start when associating my google account and stuff...
I assume that is because of the additional CSC and PHONE file that was included in I9100XXLP6 ## but I don´t know where to find the refering files for 2.3.6. firmwares since these only come with 1 file (for PDA)...
I would be glad for any help I can get
Click to expand...
Click to collapse
greetings hello I commented that the same thing happened to me the only thing I do is flash with this version XWKK5
follow these steps:
1.Install again (XXLP6) completely.
2.turn off the phone and enter download mode and install the (XWKK5).
3. Once you install the XWKK5 completely. turn off the phone and go into recovery mode and perform the wipes
I hope to help and luck.
I hope you understand me and sorry but my English is a bit bad jejjee
I flashed this update, throuch odin, and now the phone will only boot into download mode or the screen that says to use kies recovery. The problem is, even though I can boot into download mode, the computer no longer recognizes my phone. No sounds when I plug it in or anything. If I plug a jig in, it will come on so it's not the port. Can someone help me?
rogermhoffmanjr said:
I flashed this update, throuch odin, and now the phone will only boot into download mode or the screen that says to use kies recovery. The problem is, even though I can boot into download mode, the computer no longer recognizes my phone. No sounds when I plug it in or anything. If I plug a jig in, it will come on so it's not the port. Can someone help me?
Click to expand...
Click to collapse
Did you have KIES running while flashing?
No I did not
Did you do a full wipe ? wipe cache?
dotdoms said:
but now that I am trying to flash again any 2.3.6. firmware I keep getting errors already at the start when associating my google account and stuff...
I assume that is because of the additional CSC and PHONE file that was included in I9100XXLP6 ## but I don´t know where to find the refering files for 2.3.6. firmwares since these only come with 1 file (for PDA)...
Click to expand...
Click to collapse
You need a three part firmware, with modem, csc and pda, flash with pit and repartition, to do a full wipe. I think you used a non wipe firmware, that's the reason for the bugs.
Question
When you flashed the LP6, did you flash it with the .pit file too? I suggest you flash back to your stock ROM but you also have to flash a .pit file as well. This happened to me too when I flashed the KP8 ROM. I reflashed my stock ROM but it kept giving me errors at the initial boot. So I flashed my stock ROM again this time with the same .pit file. If I'm not mistaken it's this: u1_02_20110310_emmc_EXT4.pit
dotdoms said:
Hello,
I just flashed with odin the new ICS firmware out on sammobile for sgs2 (I9100XXLP6 ##) which came with a file for PDA, for CSC and for Phone, but now that I am trying to flash again any 2.3.6. firmware I keep getting errors already at the start when associating my google account and stuff...
I assume that is because of the additional CSC and PHONE file that was included in I9100XXLP6 ## but I don´t know where to find the refering files for 2.3.6. firmwares since these only come with 1 file (for PDA)...
I would be glad for any help I can get
Click to expand...
Click to collapse
Did you get the 2.3.6 firmware? If not look at this thread from Infratech: http://forum.xda-developers.com/showthread.php?t=1075278. Have a good look at the section marked "Individual CSC Packages". Maybe this could help if you suspect a wrong CSC being the cause of your problem.

[Q] KIES does not show latest firmware

I got a Galaxy S3 around a week back. The CSC was set to COA and it was running the old firmware. KIES used to show the current and latest firmware.
I have updated to the XXALF2 using ODIN and also set the CSC to BTU. However KIES does not show the lastest firmware anymore. Just the current firmware. Does that mean, KIES wont be able to update my phone?
i have done exactly the same & getting the same result in kies, i think you have to be on unmodified rom without flash count triggered? i could be wrong though
Right after the flash. My CSC was set to KOR. However I changed it to BTU using *#1234*IMEI*. I was getting the message that KIES cannot update the firmware when it was on KOR. That message seems to have gone.
This problem is quite confusing.
i flashed mine with stock LF2 BTU but kies states "your device does not support upgrading via kies"
and my CSC shows "CSC:LF2 (H3G)" is this normal?
Hmm. I had that message on KIES when my CSC changed to KOR. After changing it to BTU, that message was gone.
Initially - XXALE8 -COA (KIES showed the version the phone and the latest version).
After flashing - XXALF2 -KOR (KIES states that it wont be able to update firmware).
Now - XXALF2 - BTU (KIES does not show the latest firmware. Just the one on the phone).
I got this problem too i think it`s bcuz i rooted my phone..i have stock firmware btw
I have seen that on a few forums that rooting might trigger that. However I am on the stock firmware only. I haven't rooted my phone.
sry for double post but i fixed my problem
the only thing i had to do was to reset the counter with triangle away
Where is this triangle located?
anyone with rooting experience explain what the problem is or is this normal after rooting?
should i have only flashed PDA & not PHONE & CSC or is that not possible?
http://forum.xda-developers.com/showthread.php?t=1494114
here u can find triangle away all u have to do is install the app and then press reset counter after u open the app
then it will reboot and then u have to press the volume up button to reset the counter
sry for my english
Do I need to root my phone. If so, how and how can I unroot it after using the application?
if ur not rooted u dont need to run triangle away bcuz ur counter is set to 0 by default
there must be another solution for you...just wait to somebody else answer..
i thought even flashing stock with odin without root still bumps up the flash counter?
So I have managed to fix the problem. Here's my solution.
1) Root the phone.
2) Run the triangle away application to reset the counter.
3) After that's done, wipe the data on the phone (volume up+home+power button) and select the options:
a) wipe data/factory reset
b)wipe cache partition
c) advanced - wipe dalvik cache
4) Remove battery.
5) Put the battery back in and hold (volume down+home+power button).
6)Start ODIN and restore to the firmware that was ON THE PHONE.
7)Reset the phone to default after thats done.
I did that and now KIES is back to normal for me. And now it show XXALF2 (BTU).
How do you fix it & keep root?
Sent from my GT-I9300 using Tapatalk 2
goodie said:
How do you fix it & keep root?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Just complete step 1 & 2. I wanted to get rid of the root as well, so I performed the other steps.
Diaze said:
I got this problem too i think it`s bcuz i rooted my phone..i have stock firmware btw
Click to expand...
Click to collapse
Ive rooted using cfroot and kies is still recognising my phone for updates
Although i have not done anything but root
Kies upgrade depends onan actual upgrade for the firmware being on the server .Also the phone codes you present it matching firmware on the server.Root may or may not alter such codes.
Solution ignore Kies join XDA and learn how to flash or download stock firmware .
jje
Sent from my GT-I9300 using xda premium
Sorry guys, changed CSC to BTU using *#272*IMEI# all good now, kies shows my firmware & latest available also shows my device status as "Normal" NOT "Modified"!:laugh:

Samsung S2 No Singal, No Imei Problem

Hi
Basically rencently i got a used samsung s2 and its showing me on,
About Phone:
Model N: GT I9100
Android V: 2.3.3
Baseband V: Unknown
Kernal V: [email protected] #2
Build N: GINGERBREAD.BVKG3
STATUS:
MY Phone Number: Unknown
Network: Unknown
Emei: Unknown
Emei SV: Unknown
So i have tried 2 apps from market and none are working and i have backup the EFS and re-used it and still did not fix the problem.
I was wondering if i installed a different ROM that might fix it but for this i need someone to redirect me to a rom that will work with the version of my phone because i am kind new into this.
Thanks
Have you tried restoring the EFS backup with kTool?
23732 said:
Have you tried restoring the EFS backup with kTool?
Click to expand...
Click to collapse
Yes i have but still does nothing after reboot.
Get a root file explorer from market and see if there was an automated back up made whilst previous owner was flashing roms/kernels. You may be lucky, otherwise it's a paid repair at a service centre
Sent from my GT-I9100 using xda premium
HANDSY said:
Get a root file explorer from market and see if there was an automated back up made whilst previous owner was flashing roms/kernels. You may be lucky, otherwise it's a paid repair at a service centre
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I have just checked and no there is no backup only my efs backup that i done with ktool that is there, but i have restored and still nothing.
I was wondering if i done a hard reset would it work?
Or if i installed a new ROM that works for my phone version that might work?
BoldBiker said:
I have just checked and no there is no backup only my efs backup that i done with ktool that is there, but i have restored and still nothing.
I was wondering if i done a hard reset would it work?
Or if i installed a new ROM that works for my phone version that might work?
Click to expand...
Click to collapse
I don't think it will as the efs folder is unique to the handset not the ROM installed. There are few threads offering fixes with mixed results. Search and try them. All the best.
Sent from my GT-I9100 using xda premium
Flash original firmware from ODIN.. It ll surely revert back I also had NO IMEI NO baseband..
Prashanthme said:
Flash original firmware from ODIN.. It ll surely revert back I also had NO IMEI NO baseband..
Click to expand...
Click to collapse
Yes that is what i have been trying but i don't know where to get the firmware i have looked in sam website and i cant get the version for my phone from Orange.
If you could please post here the link for the firmware that would be great.
Thanks
I need this firmware
BVKG3:
Firmware info: PDA:BVKG3|PHONE:BVKG2|CSCRAKG3
BVKG3 Stock Kernel:
Password: [email protected]
But the links are dead, if someone can get me a backup would be great full
BoldBiker said:
Yes that is what i have been trying but i don't know where to get the firmware i have looked in sam website and i cant get the version for my phone from Orange.
If you could please post here the link for the firmware that would be great.
Thanks
I need this firmware
BVKG3:
Firmware info: PDA:BVKG3|PHONE:BVKG2|CSCRAKG3
BVKG3 Stock Kernel:
Password: [email protected]
But the links are dead, if someone can get me a backup would be great full
Click to expand...
Click to collapse
http://devsrom4android.blogspot.in/2012/04/uk-orange-samsung-galaxy-s2-official.html try this buddy... Its not BVKG3
I saw your other thread asking for a copy of this. This is ancient as far as firmwares go, you've got pretty much zero chance of getting your hands on it unless someone who has a copy happens to read your threads on here (seriously unlikely).
Is there a specific reason why you need such an out of date firmware; surely you can just use the latest stock firmware for your carrier/country ?
MistahBungle said:
I saw your other thread asking for a copy of this. This is ancient as far as firmwares go, you've got pretty much zero chance of getting your hands on it unless someone who has a copy happens to read your threads on here (seriously unlikely).
Is there a specific reason why you need such an out of date firmware; surely you can just use the latest stock firmware for your carrier/country ?
Click to expand...
Click to collapse
Sorry but you must be mistaken me for someone else because this is my only thread about this phone that i have.
Also i have tried downloading the stock firmware for orange uk which is Firmware info: PDA:BVKG3 and i have searched on google and lot more websites and all the download links i get they are all dead so that is why i open a thread to try and get help on the community here.
Really ? What's this then ?
I understand what you're saying, but what I'm saying is your chances of getting hold of this particular firmware are close to zero.
Given the almost impossibility of getting it, why wouldn't you just use the latest available stock firmware for your carrier/country if you need to go back to stock ?
because i cant find the firmware were the download link.ent dead.
I understand what you're saying, but what I'm saying is your chances of getting hold of this particular firmware are close to zero.
Get the PC version of Checkfus (search for it on here/Google). You to choose your phone model, carrier & country in pulldown boxes, and it will enable you to download the latest stock firmware which you can flash in Odin.
MistahBungle said:
Get the PC version of Checkfus (search for it on here/Google). You to choose your phone model, carrier & country in pulldown boxes, and it will enable you to download the latest stock firmware which you can flash in Odin.
Click to expand...
Click to collapse
I have downloading the firmware now i will do a backup to make sure and then i will post here.
not working at all i download this one I9100BVLPH_I9100ORALPH_I9100BVLPE_HOME.tar.md5 which is the one for my phone Orange and i installed it on Odin and now it wont let me do anything well it turns on and all but the screen is black does not have unlock sliding features.
All i can do is go to the top bar and turn on the wireless and all the features there.
I need help guys
So i noticed something on recovery mode this is all the options i get:
reboot
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
where is the options gone for me to install from memory card?
Your problem will not be fixed flashing roms. You need to search this forum for solutions. Even then it's not certain it will repair your phone, often only solution is a repair centre. Try this one to start with. http://forum.xda-developers.com/showthread.php?t=1264021
All the best
Sent from my GT-I9100 using xda premium
I installed firmware not rom, but my problem is that i cant see no menu or anything all i can do with my phone is push the top bar down and turn wifi and the other options.
Guys after i installed the firmware for orange my phone turns on but no menus just black screen all i can do with the phone is drag the topbar down and turn on and off the features like wifi, etc
Enter CMW wipe data/factory reset, wipe dalvik cache and format system. Re-flash the firmware.
Sent from my GT-I9100 using xda premium

Flashing different country's pda

I have done this by mistake in the past using odin but I can't understand why it didn't work.
I have now a phone from Australia apparently and kies is not very helpful. I already have the BTU ELLA update but I'm not sure if it would work flashing that with odin. In the past it didn't work and I had to reflash the correct update.
Am I supposed to flash more than just the PDA?
vasp3690 said:
I have done this by mistake in the past using odin but I can't understand why it didn't work.
I have now a phone from Australia apparently and kies is not very helpful. I already have the BTU ELLA update but I'm not sure if it would work flashing that with odin. In the past it didn't work and I had to reflash the correct update.
Am I supposed to flash more than just the PDA?
Click to expand...
Click to collapse
No, just place the correct rom in PDA and flash it. The phone however has a specific sales code and if the installed firmware differs from the device`s country code Kies will not support updates. Only if you have the correct regional rom for your S3.
Thanks.
In the past I had used a BTU Tom instead of the vodafone specific on a i9300 and it had lost the notification bar and touzhwiz crashed.
Once I installed the vodafone specific rom it went back to normal.
I have now come across the ELLA update on a Australian import s3 and just flashed it with kies. Trouble I have with that now is that the bottom shortcuts somehow are stuck and wont be replaced. I will try and reflash the rom tomorrow with odin and if it doesn't work I'd like to try the international version of 4.1.2.
Did you wipe your device after flashing the firmware?
Some carriers do only than little modifications to the device and may cause incompatibilites with the standard roms.
How do I do a complete wipe?
vasp3690 said:
How do I do a complete wipe?
Click to expand...
Click to collapse
Go to settings, backup and restore and do a data facory reset.
Ah you mean a factory data reset.
When I do that the australian version adds 2 apps which are easily removed and I cannot see anything else there. I also have another issue.
Odin 3.04 does not see my phone. Only odin 1.85 can.
But even that version says that the md5 file I downloaded from sammobile is invalid.
I am going to try this with mobile odin
Right
Tried the btu version with mobile odin and again have the same issue. Notification panel is gone and the touchwiz doesn't work properly.
vasp3690 said:
Right
Tried the btu version with mobile odin and again have the same issue. Notification panel is gone and the touchwiz doesn't work properly.
Click to expand...
Click to collapse
You have to reset after you flashed the rom. Did you reset the flash counter with Triangle Away?
Update
Retried the btu md5 but selected to wipe data and cache from mobile odin pro.
It seems to be working now

Categories

Resources