SuperOneClick Checking Drivers... Failed. - XPERIA X10 Q&A, Help & Troubleshooting

Hi there, first post!
So I've done a lot of searching on the forums & I can't find anyone with this problem with the X10. I found that someone had the problem on the Galaxy S 4G, but except for the initial problem all the other information I found in the thread was irrelevant.
OK So I have PC Companion installed, I tried to get SEUS but it said on Sony Ericsson's website "This software is not available for the Xperia™ X10.
Go to the Software downloads overview to see available software for your phone."
So to get the SEMC HUSB driver I downloaded the x10 drivers from sony's developer website. OK, now in USB debug mode, I don't get the question mark logo next to SEMC HUSB device in my Windows device manager anymore.
Run superoneclick, I get "checking drivers. . . failed" & then it freezes at "waiting for device."
Can anyone help me?
ATM I am switching to my old computer that I used to upgrade my x10a to 2.1 with (I am on AT&T & my 2.1 install has gone sort of buggy, the English keyboard has dead spots on it, but the korean keyboard works fine, the dead spots are also dead when opening apps there, but I can use the dead spot to scroll fine. I figured if I am going to flash it, I might as well root and upgrade)

Skullsplitterjulian said:
Hi there, first post!
So I've done a lot of searching on the forums & I can't find anyone with this problem with the X10. I found that someone had the problem on the Galaxy S 4G, but except for the initial problem all the other information I found in the thread was irrelevant.
OK So I have PC Companion installed, I tried to get SEUS but it said on Sony Ericsson's website "This software is not available for the Xperia™ X10.
Go to the Software downloads overview to see available software for your phone."
So to get the SEMC HUSB driver I downloaded the x10 drivers from sony's developer website. OK, now in USB debug mode, I don't get the question mark logo next to SEMC HUSB device in my Windows device manager anymore.
Run superoneclick, I get "checking drivers. . . failed" & then it freezes at "waiting for device."
Can anyone help me?
ATM I am switching to my old computer that I used to upgrade my x10a to 2.1 with (I am on AT&T & my 2.1 install has gone sort of buggy, the English keyboard has dead spots on it, but the korean keyboard works fine, the dead spots are also dead when opening apps there, but I can use the dead spot to scroll fine. I figured if I am going to flash it, I might as well root and upgrade)
Click to expand...
Click to collapse
Try using the latest flashtool from the flashtool thread.
It should come with a folder in it with the correct drivers.

Related

SEMC device message and upgradation to Android 2.1 on Xperia X10 fails

While trying to upgrade my Xperia X10i from Android 1.6 to 2.1 at one stage when I press and hold the back button while connecting the USB cable to the phone a message appears on computer screen saying "New hardware found" "SEMC flash device" and the computer (running on windows XP) hangs. This is happening again and again and preventing me to upgrade to Android 2.1. I need help in following areas:
1. How to install the SEMC flash driver (and of course where to find it)
2. How can I proceed further to update my phone to Android 2.1
3. Any link of youtube showing the installation of SEMC flash driver
My phone info is as following:
Model: X10i
Country: Android rest of Africa (b)
Brand: Customized ARO
Sony Ericsson PC companion is showing availability of new update (Android 2.1) but the above mentioned error is not letting me complete the installation process. I'm using this phone in Pakistan.
Urgent help/ guidance would be highly appreciated.
coldbird said:
While trying to upgrade my Xperia X10i from Android 1.6 to 2.1 at one stage when I press and hold the back button while connecting the USB cable to the phone a message appears on computer screen saying "New hardware found" "SEMC flash device" and the computer (running on windows XP) hangs. This is happening again and again and preventing me to upgrade to Android 2.1. I need help in following areas:
1. How to install the SEMC flash driver (and of course where to find it)
2. How can I proceed further to update my phone to Android 2.1
3. Any link of youtube showing the installation of SEMC flash driver
My phone info is as following:
Model: X10i
Country: Android rest of Africa (b)
Brand: Customized ARO
Sony Ericsson PC companion is showing availability of new update (Android 2.1) but the above mentioned error is not letting me complete the installation process. I'm using this phone in Pakistan.
Urgent help/ guidance would be highly appreciated.
Click to expand...
Click to collapse
look at development, put debug usb and installed the drivers semc
pato66 said:
look at development, put debug usb and installed the drivers semc
Click to expand...
Click to collapse
I'm new to smartphones, therefore, have little knowledge of technicalities. I'll greatly appreciate if someone please gives some step by step procedure with regard to solving the above mentioned issue.
Today I tried the command: menu back back menu back menu menu back and in the "security" settings and found this:
Version Label:
R1C003
CERT Status:
SEMC [Key OK] [Active]
VIACCESS [Key OK] [Deactive]
MARLIN [Key OK] [Deactive]
SEMC key is active and this is probably the cause of freezing computer and not letting Android 2.1 install. But I'm not sure. Any one who understands these settings please confirm if this is the cause. And if yes then how to 'deactivate' the SEMC key.
coldbird said:
Today I tried the command: menu back back menu back menu menu back and in the "security" settings found this:
Version Label:
R1C003
CERT Status:
SEMC [Key OK] [Active]
VIACCESS [Key OK] [Deactive]
MARLIN [Key OK] [Deactive]
SEMC key is active and this is probably the cause of freezing computer and not letting Android 2.1 install. But I'm not sure. Any one who understand these settings please confirm if this is the cause. And if yes then how to 'deactivate' the SEMC key.
Click to expand...
Click to collapse
No, I believe that this means that the SEMC KEY -- the BACK BUTTON is active, meaning it can be used. The Back button is the only way to activate flash mode when the PC recognizes the phone as a SEMC device.
SEUS says that the min requirement is a P4 3.6Ghz processor, and that if the software doesn't recognize the phone in 3-6 seconds, you have to try it again by using the back button on the software so that it won't lock up.
stan.s said:
No, I believe that this means that the SEMC KEY -- the BACK BUTTON is active, meaning it can be used. The Back button is the only way to activate flash mode when the PC recognizes the phone as a SEMC device.
SEUS says that the min requirement is a P4 3.6Ghz processor, and that if the software doesn't recognize the phone in 3-6 seconds, you have to try it again by using the back button on the software so that it won't lock up.
Click to expand...
Click to collapse
As soon as I hold the back button and attach the USB cable with the phone (Xperia X10) this message appears "Found New Hardware" "SEMC Device" and the computer running on Windows XP (2.8 Ghz processor) hangs and doesn't do anything unless I restart it. I've changed USB port of computer and also set the phone to factory default settings but no progress. I have tried Sony Ericsson Update Service (SEUS) and PC Companion both but no success. Is there any way to upgrade my phone from Android 1.6 to 2.1? Need help.
coldbird said:
Is there any way to upgrade my phone from Android 1.6 to 2.1? Need help.
Click to expand...
Click to collapse
See the couple of threads in this section, but you will need flash mode to use them, and SEUS as well so getting that sorted should be your first concern.
XperiaX10iUser said:
See the couple of threads in this section, but you will need flash mode to use them, and SEUS as well so getting that sorted should be your first concern.
Click to expand...
Click to collapse
I'm a newbie here and this is my first ever smart phone. I'll be grateful if you could copy/paste a link here which could solve my problem or if possible tell me step by step procedure with regard to getting this SEMC device/ driver issue resolved. I have tried upgrading Android from 1.6 to 2.1 on at least two desktop computers but both hanged as soon as the "Found New Hardware" message popped up.
coldbird said:
I'm a newbie here and this is my first ever smart phone. I'll be grateful if you could copy/paste a link here which could solve my problem
Click to expand...
Click to collapse
You can find the threads in this section for getting 2.1, your computer hanging is a different issue however. I don't have XP so maybe someone else that does can help you with that.
Hey, I had the same problem as you..
fyi: I'll be using SEUS and "Update Service" interchangeably
1. google "se update service x10", the first result should be the sonyerricson website. The page there is the download page for SEUS.
2. Download and install 'Update Service' (~35.3MB file).
3. Backup your phone data first.
4. Run SEUS and follow the onscreen instructions. I don't quite remember the exact steps, but it should be something like:
4a. Turn of phone, wait at least 30 secs.
4b. Plug in USB to phone.
4c. Hold 'Back' button on phone
4d. Plug in USB to PC.
5. SEUS should detect your phone and look for updated firmware. But it should also install your SEMC usb drivers that you need for the flash tool.
When I did the above, it didn't find any firmware updates for my phone, so I could just exit SEUS and use the 2.1 flasher in the other posts.
lion1116 said:
Hey, I had the same problem as you..
fyi: I'll be using SEUS and "Update Service" interchangeably
1. google "se update service x10", the first result should be the sonyerricson website. The page there is the download page for SEUS.
2. Download and install 'Update Service' (~35.3MB file).
3. Backup your phone data first.
4. Run SEUS and follow the onscreen instructions. I don't quite remember the exact steps, but it should be something like:
4a. Turn of phone, wait at least 30 secs.
4b. Plug in USB to phone.
4c. Hold 'Back' button on phone
4d. Plug in USB to PC.
5. SEUS should detect your phone and look for updated firmware. But it should also install your SEMC usb drivers that you need for the flash tool.
When I did the above, it didn't find any firmware updates for my phone, so I could just exit SEUS and use the 2.1 flasher in the other posts.
Click to expand...
Click to collapse
I've already tried Sony Ericsson Update Service (SEUS) and PC Companion as I mentioned in my earlier posts above but no success. Please shed some light on 2.1 flasher which u have mentioned. Also, I would appreciate if you could tell me how you resolved your issue. I'm not good at technicalities so I hope you would explain me things in simpler words.
so the 2.1 flash I mentioned won't help your case right now, since you are still stuck at the 'New Hardware Found'.
I just reread your posts, and your computer hangs (ie.freezes?) when you plug in the device?
You will probably need to do the update on a newer (ie. better) computer... can you borrow a friend's computer? If your computer isn't hanging when you plug the device, then everything else will work out. So get your hanging computer issue resolved first.
I think it is a major problem with your pc if the drivers cannot be installed.
At least one try is NOT TO RELEASE THE BACK BUTTON when Seus trys to detect your phone.
If all don't work your XP might be ****ed up and needs a fresh install at all.
If you are not willing to reinstall XP just try to get handson another PC to flash your phone
Also be sure all VirusScanners and Firewalls etc are shut off!
Regards
I've tried at least two desktop computers (both running on Windows XP) and both hang as soon as they find new hardware (only in case of Xperia X10). I tried other hardwares like Printer and another phone Sony Ericsson K750i. Surprisingly both worked perfectly well and drivers were also installed. I think I should give Xperia X10 a try on a laptop now. See what happens.
Issue has been resolved. I installed USB Flash Driver before opening SEUS and going for update. And when driver was successfully installed then I restarted the computer and then upgraded my Xperia X10i by using Sony Ericsson Update Service (SEUS). Now, I'm having Android 2.1 which is working perfectly well. Thanks for your precious suggestion, friends.
Hi coldbird,
can I ask where did you get the drivers?
I checked the S-E site and it says there that the newest drivers are included in Sony Ericsson PC Companion 2.0
If I attach the X10 before opening PC Companion, then after a short while the Companion opens anyway.
I have disabled Kaspersky because I read somewhere that it can cause issues.
I still have not been able to update my friends X10.
Any advice welcomed.
Ofiaich
coldbird said:
Issue has been resolved. I installed USB Flash Driver before opening SEUS and going for update. And when driver was successfully installed then I restarted the computer and then upgraded my Xperia X10i by using Sony Ericsson Update Service (SEUS). Now, I'm having Android 2.1 which is working perfectly well. Thanks for your precious suggestion, friends.
Click to expand...
Click to collapse
Thank you for sharing the tip. It works for me too.
1) Installed the flash driver first by connecting the phone (switched off) to the pc while holding the back key button.
2) Once the driver successfully installed. Restart the pc. Switched on the phone.
3) Open the Sony Companion app and connect the phone.

Semc hsusb

i just upgrades my phone to 2.1, but now my phone shows up as SEMC HSUSB device, and i cant the ADB tools, i have restarted my computer, un/installed SEUS, i tested in another computer and it shows up normal. any suggestions?
I also had the same problem but when I installed SEMC device driver the issue was resolved. You can find the drivers in other threads. I also downloaded by searching other threads.
coldbird said:
I also had the same problem but when I installed SEMC device driver the issue was resolved. You can find the drivers in other threads. I also downloaded by searching other threads.
Click to expand...
Click to collapse
can y link it please?
regarding semc hsusb
update ur windows , it will update its drivers,, nd works fine..
i do tht and it works..
a link would be usefull i have the same problem
Hi,
I also have this problem, with a certain X10i device. Windows Vista was asking for "SEMC HSUSB Device Driver". All other (3) X10i were working fine with ADB debugging on this computer. Looks like a batch of devices call driver installation with a different device ID set, which was in may case "VID_0FCE&PID_2146&MI_00". You can look up and compare this in the driver installation log file "setupapi.app.log" which is located in the "%windir%\inf" directory. So I´m currently testing driver conversion from the other (working) X10i.
Will report how it goes ...
Regards /// Nonix
Hi again,
porting the driver didn´t work, so I decided to backup system with help of droid explorer and start up with a clean ROM on 2.0.2.A.0.24 (including root) with custom/generic DE (SI: 1235-7836).
Now the driver problem has disappeared aswell.
*EDIT* Try out the new "all in one" Flash Tool 0.24, what does in minutes, that almost took us hours some time ago ;-)
http://forum.xda-developers.com/showthread.php?p=10738467
Gosh, those guys know their job ...
Regards - Nonix

go back to froyo

hi, I have an x10 mini pro, i've been used to flash custom roms on it and if something goes wrong i was always capable of moving back to froyo using pc companion's repair option, but i've been trying today to go back to froyo because a friend of mine bought the cell to me but she doesn't like Cyanogen mod cause it has bugs, so i plugged the phone to pc companion but it doesn't connect my phone, when i press support zone it doens't recognize the device, if i press how to connect a popup comes out, i follow instructions but the "final" option is to update pc companion, but i have the latest version. and that's it, how can i go back to froyo? im currently on gingerDx v021b.
does anyone has the files for flashtool or guide me on how to go back? thanks
plotinus said:
hi, I have an x10 mini pro, i've been used to flash custom roms on it and if something goes wrong i was always capable of moving back to froyo using pc companion's repair option, but i've been trying today to go back to froyo because a friend of mine bought the cell to me but she doesn't like Cyanogen mod cause it has bugs, so i plugged the phone to pc companion but it doesn't connect my phone, when i press support zone it doens't recognize the device, if i press how to connect a popup comes out, i follow instructions but the "final" option is to update pc companion, but i have the latest version. and that's it, how can i go back to froyo? im currently on gingerDx v021b.
does anyone has the files for flashtool or guide me on how to go back? thanks
Click to expand...
Click to collapse
You mean eclair, not froyo
I think you have to go into update phone or something in pc companion then do it from there, it doesn't matter if it recognizes the phone.
If that fails you'll have to use SEUS or flashtool, I'll try finding the files for you
I haven't used PC Companion in a while so I can't give you much advice
x10man
x10man said:
You mean eclair, not froyo
I think you have to go into update phone or something in pc companion then do it from there, it doesn't matter if it recognizes the phone.
If that fails you'll have to use SEUS or flashtool, I'll try finding the files for you
I haven't used PC Companion in a while so I can't give you much advice
x10man
Click to expand...
Click to collapse
Oh yeah. Eclair my bad!
Thanks you I'm gonna try it. If you find the files please let me know
SGS2
plotinus said:
Oh yeah. Eclair my bad!
Thanks you I'm gonna try it. If you find the files please let me know
SGS2
Click to expand...
Click to collapse
No luck in finding the files so far but you could follow the guide here and make your own ftf file specific to your operator and country - that will work best aside from PC Companion
x10man
x10man said:
No luck in finding the files so far but you could follow the guide here and make your own ftf file specific to your operator and country - that will work best aside from PC Companion
x10man
Click to expand...
Click to collapse
i'm gonna try, i think latest pc companio (2.1) doesn't have the repair option, cause i remember with older ones i was able to choose repair even with my phone unplugged...
something else, when i open seus, a loading bar apears "checking for updates", but it never gets to the end, just half way and a popup appears: "AN ERROR OCURRED, APPLICATION WILL CLOSE". and it closes... can you help?
plotinus said:
i'm gonna try, i think latest pc companio (2.1) doesn't have the repair option, cause i remember with older ones i was able to choose repair even with my phone unplugged...
something else, when i open seus, a loading bar apears "checking for updates", but it never gets to the end, just half way and a popup appears: "AN ERROR OCURRED, APPLICATION WILL CLOSE". and it closes... can you help?
Click to expand...
Click to collapse
Hmm, no I can't seem to. try running it with admin privileges and maybe XP compatibility mode if you're on vista or 7
x10man
I've manage to do it. Had to use flashtool. Thanks for the help. Thread can be closed
SGS2

flash tool work around.

Dear folks,
I got a Xperia SL(LT26ii) with latest the firmware(6.2.B.1.96) and JB 4.1.2. i want to root it. However I ran into this problem. My flashtool wont recognize the phone. "says cannot identify your device."
i went to the flashtool drivers and updated the required drivers for my device and flash mode drivers as well, it still doesn't seem to work for me. Am i missing something?
NB: Sony PC companion works fine and recognizes my phone too. No yellow exclamation marks in device manager either.
please do shed some light and how to fix this. i want my device to be more customizable.

[Q] Impossible to find device with newroot to XperiaZ1

As the title describes...
Short story: First time I ever tried to do something with a mobile and I´ve fail...annoying...
Done everything as the thread describes over and over but the program cant find the device.
Tested to download the program and installed it several times, made the adjustments in my Z1 as the thread describes several times...started the sony companion ...tried to install usb drivers instead...
The phone seems connect to my computer as usual but this program cant find it!
Theone thing that I havent done yet is to replace the usbcable but....
Anyone got any suggestions?

Categories

Resources