Tip: if the flashtool not regonize your phone, use pc companion to install the SEMC Usb Driver
to let flashtool regonizing your phone.
howto do: use pc companion, do what it says,
if it says: you have already the new update, press recover, he install the SEMC Usb Driver,
then press cancel.
Now you have the Semc Usb Driver installed on your Pc/Laptop.
Updated with the new kernel from DooMlord.
read this carefully:
http://forum.xda-developers.com/showthread.php?t=1254087
i do this:
1: Please make sure you have enabled usb-debugging in your current rom before starting with this!!
2: flash the azuzu kernel downgrade ftf with flashtool
then do this and download this
http://forum.xda-developers.com/showthread.php?t=1256430
if it no respond just wait, i must have his superuser action regonize
then do this:
3: after unlocking is finish you have to flash azuzu kernel upgrade
4: now power on phone to check if the phone is starting after the unlock (if you are using a custom kernel yet with the bypass method and get stuck in a bootloop enter xrecovery and clear dalvik-cache, then your phone should boot up again fine)
power off phone and flash X10_2.3.3_DooMKernel-v06-FS-BootManager-v1.4.ftf
with flashtool
now reboot your phone and go to XRecovery and install the zipfile: x10_gb_DooMKernel-v05a-FS_wifi modules
power on phone again and if everything is right, read the line under that one
WOOOHOOO!!! Here you are with unlocked bootloader, custom kernel directly loaded AND without reflashing any rom, means you have kept your current installation
Doom his files:
Flash this with flashtool: http://www.multiupload.com/ISV5FMZHJ0
install this with xrecovery: http://www.multiupload.com/XMB0OO8PWH
i do it like this and it works !
Important !! If you are using the Unlocking Bootloader tool, just wait, do nothing,
He must get his acces to superuser, look at the letters/numbers in the tool
[*] >> run ADB in tools as administrator of x10 bootloader dont work, after that it works !
press hard but safely the Thanks button !!
succes !!!
p.s. i help a friend yeeyon1990 and myself and maybe more.
Its working !!
Thanks to:
DooMlord
Mayazcherquoi
9Lukas5
The_Laser
What's the difference of using the latest flashtool 0.4.2 by having stock 2.3.3 firmware and rooting and unlocking the bootloader using the latest flashtool?
Eugene1991 said:
What's the difference of using the latest flashtool 0.4.2 by having stock 2.3.3 firmware and rooting and unlocking the bootloader using the latest flashtool?
Click to expand...
Click to collapse
none except...it´s easier
Crowds said:
none except...it´s easier
Click to expand...
Click to collapse
yes indeed, but i post this, by some peeps dont work the new flashtool.
and i do it like this and yes it works.
This is just a rehash of the guide in the sticky in this section by lukas
It is not an easier method, using flashtool 0.4.2.0 is the currently the easiest method.
gregbradley said:
This is just a rehash of the guide in the sticky in this section by lukas
It is not an easier method, using flashtool 0.4.2.0 is the currently the easiest method.
Click to expand...
Click to collapse
Greg i know mate, but my friend yeeyon1990
have everything tried and this works for him and for me,
he was using the new flashtool but that doesnt work for him(no phone regnize or something) and this one works for him, how i explained here, so that why i makin this thread to help other peeps, i hope you will understand thit, why is start this one.
Regards
lex1986 said:
Greg i know mate, but my friend yeeyon1990
have everything tried and this works for him and for me,
he was using the new flashtool but that doesnt work for him(no phone regnize or something) and this one works for him, how i explained here, so that why i makin this thread to help other peeps, i hope you will understand thit, why is start this one.
Regards
Click to expand...
Click to collapse
OK, if it works some people, but maybe just directing to people to the sticky would be good.
Its always good to help people, I wasnt having a go...many thanks for trying to help people
I am very disappoint :-( I tried every think . And finally using the official Rom of se.
Sent from my X10i using XDA App
I think you missed someone in the credits list.
Sent from my X10i using XDA App
Hzu said:
I think you missed someone in the credits list.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Guess you mean the_laser?
9Lukas5 said:
Guess you mean the_laser?
Click to expand...
Click to collapse
Yeah thankx, i forgot the...laser
I do it when im home on sunday, sorry to forgot him.
Remember sunday is my birthday!!!
Sent from my X10i phone
lex1986 said:
Yeah thankx, i forgot the...laser
I do it when im home on sunday, sorry to forgot him.
Remember sunday is my birthday!!!
Sent from my X10i phone
Click to expand...
Click to collapse
You can still edit posts from the phone app, long press on the post you need edit, click on modify, click on edit, then add the_laser
Sent from my X10i using xda premium
gregbradley said:
You can still edit posts from the phone app, long press on the post you need edit, click on modify, click on edit, then add the_laser
Sent from my X10i using xda premium
Click to expand...
Click to collapse
you happy now? Hahaha, just kiddin mate, its done and thanks for the info.
Sent from my X10i using XDA Premium App
after flashing azuzu downgrade I can't boot up, it's stuck at SE logo
I reflashed with stock, and tried flashtool's Unlock bootloader option, but I'm stuck there too at 'waiting for device'
bbluff said:
after flashing azuzu downgrade I can't boot up, it's stuck at SE logo
Click to expand...
Click to collapse
Because you now baseband and kernel for 2.1. Thats normal, now unlock your bootloader.
.....flash the azuzu kernel downgrade ftf with flashtool
disconnect usb cable, press power button until phone vibrates shortly and immidiatly connect the usb cable again......
---------- Post added at 12:42 PM ---------- Previous post was at 12:35 PM ----------
bbluff said:
after flashing azuzu downgrade I can't boot up, it's stuck at SE logo
I reflashed with stock, and tried flashtool's Unlock bootloader option, but I'm stuck there too at 'waiting for device'
Click to expand...
Click to collapse
Repair with seus, then root your phone with flashtool 0.4.2.0 and then unlocked bl.
bbluff said:
after flashing azuzu downgrade I can't boot up, it's stuck at SE logo
I reflashed with stock, and tried flashtool's Unlock bootloader option, but I'm stuck there too at 'waiting for device'
Click to expand...
Click to collapse
no man just read better:
then do this and download this
http://forum.xda-developers.com/showthread.php?t=1256430
if it no respond just wait, i must have his superuser action regonize
you must just wait mate and read the letters in the bootloader tool what it do with the superuser (he must get his acces), i got it to. you must do nothing.
just wait patiently and it gonna be alright.
Thanks, it worked. Sorry, it really was simple.
bbluff said:
Thanks, it worked. Sorry, it really was simple.
Click to expand...
Click to collapse
no problem mate, i told it`s working,
i do it with these steps, thats why im posting this.
yes its simple.
read, be smart and its working
cheers
Related
i got a problem.
i root my hp X10 mini and install Xrecovery....
beside that i also put my android 2.3 gingerbread in my sd card...
after that i go recovery to install android 2.3...
first it is install normally...then it will turn back to recovery menu....
i thought nothing problem so i reboot it...
after reboot...it just show sony ericsson then i wait to open...
but it cant open and it just show sony ericsson few minutes then restart restart and restart....
it mean i lose to install update???
what should i do???
it cant charge using charger but using USB it got respone(just got respone when show sony ericsson)...
help me pls!!!thanks
i also want to know how to open my system using USB...TQ!!!
What exactly are you trying to do? Flash a new ROM?
Sent from my U20i using XDA App
wong950323 said:
i got a problem.
i root my hp X10 mini and install Xrecovery....
beside that i also put my android 2.3 gingerbread
Click to expand...
Click to collapse
You can't run a gingerbread rom with the stock kernel! Thats why you stick on the stock kernel logo (sony ericcson). Read the first post of the rom you flashed carefully. Isn't there something like you need costum kernel, unlock bootloader first...
What Rom did you Flash?
I hope you did a Backup in recovery ?
Did you follow the install instructions? Full wipe... Tell us a bit more, so we ca help you
U20i/nAaCM7+Kernel/XDAPremium
wong950323 said:
i got a problem.
i root my hp X10 mini and install Xrecovery....
beside that i also put my android 2.3 gingerbread in my sd card...
after that i go recovery to install android 2.3...
first it is install normally...then it will turn back to recovery menu....
i thought nothing problem so i reboot it...
after reboot...it just show sony ericsson then i wait to open...
but it cant open and it just show sony ericsson few minutes then restart restart and restart....
it mean i lose to install update???
what should i do???
it cant charge using charger but using USB it got respone(just got respone when show sony ericsson)...
help me pls!!!thanks
i also want to know how to open my system using USB...TQ!!!
Click to expand...
Click to collapse
First if your phone does not boot you need to connect your phone to sony ericsson update service and press on your phone home button+power button/unlock button+back button the same time and the seus it will reinstal again your stock rom,later reroot your phone and unlock it and at the finish take a kernel and istall it with flashtool of binary and later of this install your rom
if you help you press the thanks button
i understand but i got something confused what did u say
CrazyGamerGR said:
First if your phone does not boot you need to connect your phone to sony ericsson update service and press on your phone home button+power button/unlock button+back button the same time and the seus it will reinstal again your stock rom,later reroot your phone and unlock it and at the finish take a kernel and istall it with flashtool of binary and later of this install your rom
if you help you press the thanks button
Click to expand...
Click to collapse
what is the seus???i just didn't understand back part did you saying something like‘at the finish take a kernel and istall it with flashtool of binary and later of this install your rom’
where did i find it the flashtool you also need me to connect my phone to sony ericsson update service(you mean sony ericsson companion)
SEUS is the Sony Ericsson Update Service. As the name says, it updates your phone and repairs if necessary.
If you are trying to flash a new ROM, you have to unlock bootloader first, install custom kernel and then flash the new ROM. Look for the tutorials, they should help.
Sent from my U20i using XDA App
Yes
hiratafabio said:
What exactly are you trying to do? Flash a new ROM?
Sent from my U20i using XDA App
Click to expand...
Click to collapse
yes...does mean i flash wrong？？？how to i do...
thanks
hiratafabio said:
SEUS is the Sony Ericsson Update Service. As the name says, it updates your phone and repairs if necessary.
If you are trying to flash a new ROM, you have to unlock bootloader first, install custom kernel and then flash the new ROM. Look for the tutorials, they should help.
Click to expand...
Click to collapse
erm...need to download bootloader and custom kernel???you got link for the tutorials???
wong950323 said:
erm...need to download bootloader and custom kernel???you got link for the tutorials???
Click to expand...
Click to collapse
You need to unlock the Bootloader. Then you can flash a Costum Kernel. Use The flashtool, it's a Genius "one big Button Tool" from Bin4ry and Androxyde Thank and Donate to them. Read here: http://forum.xda-developers.com/showthread.php?p=10881307. Its a "How to Guide". The Flashtool you can get here: http://androxyde.github.com/Flashtool I hope this helps. Happy modding
U20i/nAaCM7+Kernel/XDAPremium
Before flashing a custom kernel, be sure you meet the requirements to do so. I mean, sometimes you need a specific baseband version in order for the kernel to work properly
Sent from my U20i using XDA App
link
domics said:
The Flashtool you can get here: http://androxyde.github.com/Flashtool I hope this helps. Happy modding
Click to expand...
Click to collapse
is the link can be use???i download and the file was have been damage...
Which rom are you trying to flash?
wong950323 said:
is the link can be use???i download and the file was have been damage...
Click to expand...
Click to collapse
So you try to download the flashtool? Try to download again, it's a Server problem. When i dowloaded the newest Version it took me 5 ! Times. The fifth Time 45 min to download it. Juste try again when the download stops
U20i/nAaCM7+Kernel/XDAPremium
domics said:
The Flashtool you can get here: http://androxyde.github.com/Flashtool I hope this helps.
Click to expand...
Click to collapse
is this link fake???i can't download it
http://forum.xda-developers.com/show...php?p=10881307 this i download it and install...it say want ftf file right???i wanna download ftf file???
i open flashtool and connect my phone it say'For 2011 devices line, be sure you are not in MTP mode
'what mean???hope you can save my phone
01007653 said:
Which rom are you trying to flash?
Click to expand...
Click to collapse
android 2.3 gingerbread
wong950323 said:
android 2.3 gingerbread
Click to expand...
Click to collapse
But are you trying to flash a custom ROM, right? What version? I mean, there is a bunch out there: MiniCM7, CM7MiniPro, GingerDX, etc.
Specifying it would be a lot helpful for us, too.
wong950323 said:
is this link fake???i can't download it
Click to expand...
Click to collapse
No it is the Homepage of the Flashtool. 100% real . But lets start from the beginning and please be more specific! Did you repair your Phone with SE Companion? Or are you trying to Flash over and over again? When you have a bootloop the Flashtool can't reconize your Phone
U20i/nAaCM7+Kernel/XDAPremium
domics said:
No it is the Homepage of the Flashtool. 100% real . But lets start from the beginning and please be more specific! Did you repair your Phone with SE Companion? Or are you trying to Flash over and over again? When you have a bootloop the Flashtool can't reconize your Phone
U20i/nAaCM7+Kernel/XDAPremium
Click to expand...
Click to collapse
ok...i just using SEUS...now done already...thanks guys
wong950323 said:
ok...i just using SEUS...now done already...thanks guys
Click to expand...
Click to collapse
Great . I hope you will try again flashing roms!? It is nearly impossible to brick your phone, if you follow the instrucions and always flash the right rom for your phone model.
U20i/nAaCM7+Kernel/XDAPremium
domics said:
Great . I hope you will try again flashing roms!? It is nearly impossible to brick your phone, if you follow the instrucions and always flash the right rom for your phone model.
U20i/nAaCM7+Kernel/XDAPremium
Click to expand...
Click to collapse
guys...can you simple to say how to flashing ROM???i install ROM manager...i want to clear old one Rom right???how can i clear it???you just give me link and list by 1,2,3...thanks
guys, this is my mobile's current specs (also, i have attached a screenshot);
Xperia neo (MT15a)
Android version 2.3.4
Firmware Version 4.0.2.A.0.62
i need to downgrade this to .42 to continue rooting. can somebody give me a link to download ftf file for MT15a??
thanks in advance, really appreciate your help guys.
You can make your own ftf. Repair firmware with update service, then we'll help you with thw next steps.
Via Tapatalk 2.0 on ICS
sdk16420 said:
You can make your own ftf. Repair firmware with update service, then we'll help you with thw next steps.
Click to expand...
Click to collapse
hm.. but update service will give him .62 not .42, right? or are you thinking on making prerooted image? hm now i got idea
@ prazadx: are you willing to do clean flash with pc companion or sony update service, then we'll instruct you how to make .62 .ftf, but it will be around 150MB after you zip it, wich you would need to upload..
then if your phone is sim-lock free your fastboot should be open, and it should accept prerooted .img.
even if your bootloader is locked i think it only matter for kernels.
Someone correct me if I'm wrong
its here mate
Just flash this with flashtool (extract using winzip or eqivalent first to get the ftf), root using flashtool, update OTR, install cmw and you are fine.
gregbradley said:
its here mate
Just flash this with flashtool (extract using winzip or eqivalent first to get the ftf), root using flashtool, update OTR, install cmw and you are fine.
Click to expand...
Click to collapse
hm, will i version work with no problem on a phone? don't know anyone who tried it so I'm asking
Madfysh said:
hm, will i version work with no problem on a phone? don't know anyone who tried it so I'm asking
Click to expand...
Click to collapse
me, it works for me.
I play with my phone a lot and mess with it loads
When i want to go back to a clean instal i flash that, root, update and update.
Not sure why you are making an issue about this, its the .ftf i got from this forum on how to root the neo...
gregbradley said:
me, it works for me.
I play with my phone a lot and mess with it loads
When i want to go back to a clean instal i flash that, root, update and update.
Not sure why you are making an issue about this, its the .ftf i got from this forum on how to root the neo...
Click to expand...
Click to collapse
sorry, I think you missunderstood me.
will mt15i ftf work ok on mt15a phone?
Madfysh said:
sorry, I think you missunderstood me.
will mt15i ftf work ok on mt15a phone?
Click to expand...
Click to collapse
i see your point....but i dont see why not...
try it and see is my advice..
please report back
EDIT:
And if it doesnt surely a quick edit in the build.prop will sort,,,,,
gregbradley said:
i see your point....but i dont see why not...
try it and see is my advice..
please report back
EDIT:
And if it doesnt surely a quick edit in the build.prop will sort,,,,,
Click to expand...
Click to collapse
thanks guys.
also, what is the quick edit (in the build.prop) you told? how to do that?
Madfysh said:
@ prazadx: are you willing to do clean flash with pc companion or sony update service, then we'll instruct you how to make .62 .ftf, but it will be around 150MB after you zip it, wich you would need to upload..
then if your phone is sim-lock free your fastboot should be open, and it should accept prerooted .img.
even if your bootloader is locked i think it only matter for kernels.
Someone correct me if I'm wrong
Click to expand...
Click to collapse
I'm gonna perform this flashing with flashtool. all i need is to downgrade my current firmware to .42, so that i can root my device. also this is a sim lock free device with a locked bootloader.
is there any other way to root without downgrading??
also, thanks mate..
There are another way to root but you need to unlock your bootloader, sorry I cant put links,but if you search right here in this Forum "unlock bootloader" you would see the options to do that.
Definitly this way is the only you have without unlockink bl. Thats all the peoplo say because I cant flash .42 on mine....flashtool stop always before 100% I will format pc...i dont know what other thing can be.
Any suggestion??
Sent from my MT15i using XDA
gregbradley said:
i see your point....but i dont see why not...
try it and see is my advice..
please report back
EDIT:
And if it doesnt surely a quick edit in the build.prop will sort,,,,,
Click to expand...
Click to collapse
thanks mate, it worked without any mod. also, i did rooted my neo thanks to all of you.. thanks again...
My device is se neo v.its bootloader is unlocked.After all the steps of rooting .62 , when I entered fastboot boot recoveryNeo.img it says waiting for device all the time and nothing happens after that in cmd.I reconected my device too..but the problem is there still..help me..
sachin hansaka said:
My device is se neo v.its bootloader is unlocked.After all the steps of rooting .62 , when I entered fastboot boot recoveryNeo.img it says waiting for device all the time and nothing happens after that in cmd.I reconected my device too..but the problem is there still..help me..
Click to expand...
Click to collapse
Try reinstalling the Drivers included with Flashtool.. might Fix the Problem
go to flashtool drives and install fastboot drivers
are you flashing the img from fastboot folder?
sachin hansaka said:
My device is se neo v.its bootloader is unlocked.After all the steps of rooting .62 , when I entered fastboot boot recoveryNeo.img it says waiting for device all the time and nothing happens after that in cmd.I reconected my device too..but the problem is there still..help me..
Click to expand...
Click to collapse
Don´t forget to unable unknown sources and USB debug.
If don´t work try to change USB connection on your phone from MTP to MSC or vice-versa.
pedrofigo said:
Don´t forget to unable unknown sources and USB debug.
If don´t work try to change USB connection on your phone from MTP to MSC or vice-versa.
Click to expand...
Click to collapse
thats when you are using root toolkits, which is not what op is using.
pedrofigo said:
Don´t forget to unable unknown sources and USB debug.
If don´t work try to change USB connection on your phone from MTP to MSC or vice-versa.
Click to expand...
Click to collapse
I'm really new for rooting and I found a tutorial on how to root neo v easily and it said to root it after turning off my phone.(the blue led notification).so how to change usb mode?
To get blue LED, switch off your phone, remove any cable. Press and hold the Menu button and insert the cable while holding the Menu button.
I suppose, for Flashtool method, you need the green LED. Do the same while holding the back button.
EDIT: I am sorry, you need the blue LED only
i don't know hot to root with the flashtool.method..I just tried to root it with android sdk toola and cmd..so can anyone give me step by step tutorial on how to root my neo v with flashtool please?
sachin hansaka said:
i don't know hot to root with the flashtool.method..I just tried to root it with android sdk toola and cmd..so can anyone give me step by step tutorial on how to root my neo v with flashtool please?
Click to expand...
Click to collapse
.62 Is not root-able u might need to Downgrade to .42 or Upgrade to .562 (ICS) version if u want to root Easily,,
However .62 is Rootable but Not VIA Flashtool,,,
sachin hansaka said:
i don't know hot to root with the flashtool.method..I just tried to root it with android sdk toola and cmd..so can anyone give me step by step tutorial on how to root my neo v with flashtool please?
Click to expand...
Click to collapse
It depends on what firmware you will put in your mobile. One thing you can do, just go to the search at the top right. search how to root your mobile. it's very easy to search it.
Good luck!
aamirrasool said:
.62 Is not root-able u might need to Downgrade to .42 or Upgrade to .562 (ICS) version if u want to root Easily,,
However .62 is Rootable but Not VIA Flashtool,,,
Click to expand...
Click to collapse
.62 is rootable on an unlocked bootloader using NeoRecovery and RootXperia method.
Sent from my MT11i using XDA
kirbygonzalo said:
It depends on what firmware you will put in your mobile. One thing you can do, just go to the search at the top right. search how to root your mobile. it's very easy to search it.
Good luck!
Click to expand...
Click to collapse
thnx bro..I rooted it..But now i can't install the .62 update..it says couldn't update.
sachin hansaka said:
thnx bro..I rooted it..But now i can't install the .62 update..it says couldn't update.
Click to expand...
Click to collapse
If you are trying to update to .62 via the Sony PC Companion or OTA update using your phone, it will fail as the bootloader is unlocked and there is no update support for those with unlocked bootloader.
Sent from my MT11i using XDA
Try out different ROMs
sachin hansaka said:
thnx bro..I rooted it..But now i can't install the .62 update..it says couldn't update.
Click to expand...
Click to collapse
Hey buddy, since you've got your phone rooted, why don't you try out some awesome ROMs for your phone? They are quite simple to install and Neo V has quite a few modders . I'm not a big fan of Sony's stock ROM with all their bloatware anyway
Have fun
Hey guys! So, i just flashed my sk17i using flashtool but now its not booting up. Its stuck at a black screen and vibrates after some interval. Please help me , im new to all the flashing and stuff.
Please tell me in detail how you ended up with this cause their could be millions or reasons for it and be specific with each and every point.
Press THANKS if I helped,
Best Regards,
AJ
Um, so , i followed all the steps given somewhere in the forums here to flash and then root my phone using flashtool. So i downloaded flash tool , downloaded a kernel , opened flashtool , did all the steps and then on the logs it told to remove my phone and switch it on but now when i try to switch it on it stays on a black screen and after sometime it vibrates and the back button switches on and then it goes back to the black screen and then again it vibrates. Please help
aamir roomi said:
Um, so , i followed all the steps given somewhere in the forums here to flash and then root my phone using flashtool. So i downloaded flash tool , downloaded a kernel , opened flashtool , did all the steps and then on the logs it told to remove my phone and switch it on but now when i try to switch it on it stays on a black screen and after sometime it vibrates and the back button switches on and then it goes back to the black screen and then again it vibrates. Please help
Click to expand...
Click to collapse
I think you are trying to root your phone with locked bl.
proceed with the rooting steps then flash your own kernel again and It will be okay.
Mysteryagr said:
I think you are trying to root your phone with locked bl.
proceed with the rooting steps then flash your own kernel again and It will be okay.
Click to expand...
Click to collapse
can you guide me through this step by step please? i made a big mistake doing such a thing without learning about it im really worried
aamir roomi said:
can you guide me through this step by step please? i made a big mistake doing such a thing without learning about it im really worried
Click to expand...
Click to collapse
Do not worry it is hard to brick 2011 xperia phones.
I'm sure if you flashed your phone firmware again it will boot.
now, If I'm not wrong you were following this thread :
http://forum.xda-developers.com/showthread.php?t=1842366
If you pay attention to the steps and follow them carefully you will succeed it rooting your phone with locked bl.
But give us some information to be able to help you.
Current firmware?
So are you following my rooting guide(see my signature). There it's clearly stated that whatever the status is continue with rooting. If u followed everything correctly u'll be successful.
Press THANKS if I helped,
Best Regards,
AJ
i followed the rooting steps correctly and now after i rooted it using doomlord v1 xperia 2011 ics root , i installed the kernal using flashtool. I switched my phone back on and now its stuck at a black screen again with the periodic vibration but this time without the back capacitive touch screen button instead my screen's light keeps flickering.
Did you flashed your kernel at the end? The kernel found at the end differ from the when used while rooting!
Sent from my Xperia Mini using xda app-developers app
Ok download the complete stock firmware of your phone(nearly 200 MBs) and flash it in flashmode. It should most probably switchon the device
Press THANKS if I helped,
Best Regards,
AJ
can anyone help?
I think he did not use the kernel from step 5 , but just reflashed the kernel used for rooting.
Man If you want a real help provide some info. With your posts, we are not here to guess!
Sent from my Xperia Mini using xda app-developers app
Yes i did flash the second kernel at the end.
what all info do you need?
Hold on a second what are u guys talking about...... How is he suppose to flash kernel with a locked bootloader?? Lol
Btw flash the stock firmware first then unlock bootloader(official method or testpoint method) then flash a pre rooted kernel
Device: WT19i
Rom: Zelly Cream 2.0 [MDPI]
Kernel : Lupas v3
Greyjawripper said:
Hold on a second what are u guys talking about...... How is he suppose to flash kernel with a locked bootloader?? Lol
Btw flash the stock firmware first then unlock bootloader(official method or testpoint method) then flash a pre rooted kernel
Device: WT19i
Rom: Zelly Cream 2.0 [MDPI]
Kernel : Lupas v3
Click to expand...
Click to collapse
Are you from Mars?
it is stock kernel which can be flashed with flash tool.
Sent from my Xperia Mini using xda app-developers app
Greyjawripper said:
Hold on a second what are u guys talking about...... How is he suppose to flash kernel with a locked bootloader?? Lol
Btw flash the stock firmware first then http://forum.xda-developers.com/showthread.php?t= http://forum.xda-developers.com/showthread.php?t=2170453 bootloader(official method or testpoint method) then flash a pre rooted kernel
Device: WT19i
Rom: Zelly Cream 2.0 [MDPI]
Kernel : Lupas v3
Click to expand...
Click to collapse
Dude please have proper knowledge before posting. You need an unlocked bootloader for custom kernels not the official one which are signed by sony. In the complete ftf firmware kernel is also included and it is flashed using flashtool. So in official kernel everything is removed from the ftf except kernel.sin and loader.sin and then the ftf is flashed on locked bootloader. As simple as that.
Press THANKS if I helped,
Best Regards,
AJ
aamir roomi said:
Yes i did flash the second kernel at the end.
what all info do you need?
Click to expand...
Click to collapse
Do not follow his steps, unlocking bootloader will erase drm files which cause track id not to work and you will not be able to receive ota updates.
SO, do not unlock your bootloader unless you understand the consequences.
Now, what I can tell you is try to repair with seus or pcc, after that follow the rooting guide again, it is very simple but make sure you are following step by step correctly.
The phone is in your hand and the computer is infront of you.
You are the one who is going to figure this out and make this work.
Good luck.
Sent from my Xperia Mini using xda app-developers app
Mysteryagr said:
Do not follow his steps,
Click to expand...
Click to collapse
Dude, was that for me? If yes then read my complete post before posting and if it was for the other guy then ur right
Press THANKS if I helped,
Best Regards,
AJ
urgh! i firstly downloaded the 'All other users - Kernel' then i flashed it and used the doomlord v1 xperia ics root after which i downloaded the 'Mini Pro -KERNEL' and flashed it.
Any other way round this problem without me downloading the 200 mb thing? :/
aamir roomi said:
urgh! i firstly downloaded the 'All other users - Kernel' then i flashed it and used the doomlord v1 xperia ics root after which i downloaded the 'Mini Pro -KERNEL' and flashed it.
Any other way round this problem without me downloading the 200 mb thing? :/
Click to expand...
Click to collapse
Did u marked usb debgugging, unknown sources and msc mode? If no then no there's no other way just flash complete stock ftf or repair via sus or pcc...
Press THANKS if I helped,
Best Regards,
AJ
Hello everyone. I was asking myself, if it is possible to get the stock firmware back ^^
davidvandertier said:
Hello everyone. I was asking myself, if it is possible to get the stock firmware back ^^
Click to expand...
Click to collapse
Look at the sticky in General Forum. All you need to know is there.
Sent from my D6503 using XDA Premium 4 mobile app
But I cannot get into flashmode . I tried the volume down+ connecting the usb but the only thing I can see is, that the LED is flashing 3 times. 3 different colours pleas help
davidvandertier said:
But I cannot get into flashmode . I tried the volume down+ connecting the usb but the only thing I can see is, that the LED is flashing 3 times. 3 different colours pleas help
Click to expand...
Click to collapse
i meant fastboot mode ^^
(1) Use PC Companion and do a repair.
(2) Download the relevant firmware file and use Flashtool to flash.
I will try this right now and I will report if it worked or not ^^
davidvandertier said:
I will try this right now and I will report if it worked or not ^^
Click to expand...
Click to collapse
UPDATE: waiting for charging . I have to waiit untill my battery is half-way full
Okay.. Tried it.. Didnt work :c
davidvandertier said:
UPDATE: waiting for charging . I have to waiit untill my battery is half-way full
Okay.. Tried it.. Didnt work :c
Click to expand...
Click to collapse
You need to provide a lot more information.
If you follow the OP I gave you in the earlier post, it works. Why are you using Fastboot??? You should be using Flashmode in Flashtool.
You need to ensure you have the correct PC drivers.
Again, assuming you have read and followed the suggested linked method, provide more info about your phone state.
And which method did not work? Us your bootloader unlocked?
hush66 said:
And which method did not work? Us your bootloader unlocked?
Click to expand...
Click to collapse
How can I see if it is unlocked ^^ sorry im a noob+
Unlocking is an intentional act. If you have not done it before, then it's still locked.
hush66 said:
Unlocking is an intentional act. If you have not done it before, then it's still locked.
Click to expand...
Click to collapse
oh okay. Is this really relevant? Because.. I dont know but I think, that the warranty void is damaged by doing so
It's relevant because if your bootloader is unlocked, then you need to use Sony Flash Tool to flash stock firmware.
So which method failed for you? And which step failed and what's the error? You need to give us more info so that we can help you.