Hey guys! So, i just flashed my sk17i using flashtool but now its not booting up. Its stuck at a black screen and vibrates after some interval. Please help me , im new to all the flashing and stuff.
Please tell me in detail how you ended up with this cause their could be millions or reasons for it and be specific with each and every point.
Press THANKS if I helped,
Best Regards,
AJ
Um, so , i followed all the steps given somewhere in the forums here to flash and then root my phone using flashtool. So i downloaded flash tool , downloaded a kernel , opened flashtool , did all the steps and then on the logs it told to remove my phone and switch it on but now when i try to switch it on it stays on a black screen and after sometime it vibrates and the back button switches on and then it goes back to the black screen and then again it vibrates. Please help
aamir roomi said:
Um, so , i followed all the steps given somewhere in the forums here to flash and then root my phone using flashtool. So i downloaded flash tool , downloaded a kernel , opened flashtool , did all the steps and then on the logs it told to remove my phone and switch it on but now when i try to switch it on it stays on a black screen and after sometime it vibrates and the back button switches on and then it goes back to the black screen and then again it vibrates. Please help
Click to expand...
Click to collapse
I think you are trying to root your phone with locked bl.
proceed with the rooting steps then flash your own kernel again and It will be okay.
Mysteryagr said:
I think you are trying to root your phone with locked bl.
proceed with the rooting steps then flash your own kernel again and It will be okay.
Click to expand...
Click to collapse
can you guide me through this step by step please? i made a big mistake doing such a thing without learning about it im really worried
aamir roomi said:
can you guide me through this step by step please? i made a big mistake doing such a thing without learning about it im really worried
Click to expand...
Click to collapse
Do not worry it is hard to brick 2011 xperia phones.
I'm sure if you flashed your phone firmware again it will boot.
now, If I'm not wrong you were following this thread :
http://forum.xda-developers.com/showthread.php?t=1842366
If you pay attention to the steps and follow them carefully you will succeed it rooting your phone with locked bl.
But give us some information to be able to help you.
Current firmware?
So are you following my rooting guide(see my signature). There it's clearly stated that whatever the status is continue with rooting. If u followed everything correctly u'll be successful.
Press THANKS if I helped,
Best Regards,
AJ
i followed the rooting steps correctly and now after i rooted it using doomlord v1 xperia 2011 ics root , i installed the kernal using flashtool. I switched my phone back on and now its stuck at a black screen again with the periodic vibration but this time without the back capacitive touch screen button instead my screen's light keeps flickering.
Did you flashed your kernel at the end? The kernel found at the end differ from the when used while rooting!
Sent from my Xperia Mini using xda app-developers app
Ok download the complete stock firmware of your phone(nearly 200 MBs) and flash it in flashmode. It should most probably switchon the device
Press THANKS if I helped,
Best Regards,
AJ
can anyone help?
I think he did not use the kernel from step 5 , but just reflashed the kernel used for rooting.
Man If you want a real help provide some info. With your posts, we are not here to guess!
Sent from my Xperia Mini using xda app-developers app
Yes i did flash the second kernel at the end.
what all info do you need?
Hold on a second what are u guys talking about...... How is he suppose to flash kernel with a locked bootloader?? Lol
Btw flash the stock firmware first then unlock bootloader(official method or testpoint method) then flash a pre rooted kernel
Device: WT19i
Rom: Zelly Cream 2.0 [MDPI]
Kernel : Lupas v3
Greyjawripper said:
Hold on a second what are u guys talking about...... How is he suppose to flash kernel with a locked bootloader?? Lol
Btw flash the stock firmware first then unlock bootloader(official method or testpoint method) then flash a pre rooted kernel
Device: WT19i
Rom: Zelly Cream 2.0 [MDPI]
Kernel : Lupas v3
Click to expand...
Click to collapse
Are you from Mars?
it is stock kernel which can be flashed with flash tool.
Sent from my Xperia Mini using xda app-developers app
Greyjawripper said:
Hold on a second what are u guys talking about...... How is he suppose to flash kernel with a locked bootloader?? Lol
Btw flash the stock firmware first then http://forum.xda-developers.com/showthread.php?t= http://forum.xda-developers.com/showthread.php?t=2170453 bootloader(official method or testpoint method) then flash a pre rooted kernel
Device: WT19i
Rom: Zelly Cream 2.0 [MDPI]
Kernel : Lupas v3
Click to expand...
Click to collapse
Dude please have proper knowledge before posting. You need an unlocked bootloader for custom kernels not the official one which are signed by sony. In the complete ftf firmware kernel is also included and it is flashed using flashtool. So in official kernel everything is removed from the ftf except kernel.sin and loader.sin and then the ftf is flashed on locked bootloader. As simple as that.
Press THANKS if I helped,
Best Regards,
AJ
aamir roomi said:
Yes i did flash the second kernel at the end.
what all info do you need?
Click to expand...
Click to collapse
Do not follow his steps, unlocking bootloader will erase drm files which cause track id not to work and you will not be able to receive ota updates.
SO, do not unlock your bootloader unless you understand the consequences.
Now, what I can tell you is try to repair with seus or pcc, after that follow the rooting guide again, it is very simple but make sure you are following step by step correctly.
The phone is in your hand and the computer is infront of you.
You are the one who is going to figure this out and make this work.
Good luck.
Sent from my Xperia Mini using xda app-developers app
Mysteryagr said:
Do not follow his steps,
Click to expand...
Click to collapse
Dude, was that for me? If yes then read my complete post before posting and if it was for the other guy then ur right
Press THANKS if I helped,
Best Regards,
AJ
urgh! i firstly downloaded the 'All other users - Kernel' then i flashed it and used the doomlord v1 xperia ics root after which i downloaded the 'Mini Pro -KERNEL' and flashed it.
Any other way round this problem without me downloading the 200 mb thing? :/
aamir roomi said:
urgh! i firstly downloaded the 'All other users - Kernel' then i flashed it and used the doomlord v1 xperia ics root after which i downloaded the 'Mini Pro -KERNEL' and flashed it.
Any other way round this problem without me downloading the 200 mb thing? :/
Click to expand...
Click to collapse
Did u marked usb debgugging, unknown sources and msc mode? If no then no there's no other way just flash complete stock ftf or repair via sus or pcc...
Press THANKS if I helped,
Best Regards,
AJ
Related
Tip: if the flashtool not regonize your phone, use pc companion to install the SEMC Usb Driver
to let flashtool regonizing your phone.
howto do: use pc companion, do what it says,
if it says: you have already the new update, press recover, he install the SEMC Usb Driver,
then press cancel.
Now you have the Semc Usb Driver installed on your Pc/Laptop.
Updated with the new kernel from DooMlord.
read this carefully:
http://forum.xda-developers.com/showthread.php?t=1254087
i do this:
1: Please make sure you have enabled usb-debugging in your current rom before starting with this!!
2: flash the azuzu kernel downgrade ftf with flashtool
then do this and download this
http://forum.xda-developers.com/showthread.php?t=1256430
if it no respond just wait, i must have his superuser action regonize
then do this:
3: after unlocking is finish you have to flash azuzu kernel upgrade
4: now power on phone to check if the phone is starting after the unlock (if you are using a custom kernel yet with the bypass method and get stuck in a bootloop enter xrecovery and clear dalvik-cache, then your phone should boot up again fine)
power off phone and flash X10_2.3.3_DooMKernel-v06-FS-BootManager-v1.4.ftf
with flashtool
now reboot your phone and go to XRecovery and install the zipfile: x10_gb_DooMKernel-v05a-FS_wifi modules
power on phone again and if everything is right, read the line under that one
WOOOHOOO!!! Here you are with unlocked bootloader, custom kernel directly loaded AND without reflashing any rom, means you have kept your current installation
Doom his files:
Flash this with flashtool: http://www.multiupload.com/ISV5FMZHJ0
install this with xrecovery: http://www.multiupload.com/XMB0OO8PWH
i do it like this and it works !
Important !! If you are using the Unlocking Bootloader tool, just wait, do nothing,
He must get his acces to superuser, look at the letters/numbers in the tool
[*] >> run ADB in tools as administrator of x10 bootloader dont work, after that it works !
press hard but safely the Thanks button !!
succes !!!
p.s. i help a friend yeeyon1990 and myself and maybe more.
Its working !!
Thanks to:
DooMlord
Mayazcherquoi
9Lukas5
The_Laser
What's the difference of using the latest flashtool 0.4.2 by having stock 2.3.3 firmware and rooting and unlocking the bootloader using the latest flashtool?
Eugene1991 said:
What's the difference of using the latest flashtool 0.4.2 by having stock 2.3.3 firmware and rooting and unlocking the bootloader using the latest flashtool?
Click to expand...
Click to collapse
none except...it´s easier
Crowds said:
none except...it´s easier
Click to expand...
Click to collapse
yes indeed, but i post this, by some peeps dont work the new flashtool.
and i do it like this and yes it works.
This is just a rehash of the guide in the sticky in this section by lukas
It is not an easier method, using flashtool 0.4.2.0 is the currently the easiest method.
gregbradley said:
This is just a rehash of the guide in the sticky in this section by lukas
It is not an easier method, using flashtool 0.4.2.0 is the currently the easiest method.
Click to expand...
Click to collapse
Greg i know mate, but my friend yeeyon1990
have everything tried and this works for him and for me,
he was using the new flashtool but that doesnt work for him(no phone regnize or something) and this one works for him, how i explained here, so that why i makin this thread to help other peeps, i hope you will understand thit, why is start this one.
Regards
lex1986 said:
Greg i know mate, but my friend yeeyon1990
have everything tried and this works for him and for me,
he was using the new flashtool but that doesnt work for him(no phone regnize or something) and this one works for him, how i explained here, so that why i makin this thread to help other peeps, i hope you will understand thit, why is start this one.
Regards
Click to expand...
Click to collapse
OK, if it works some people, but maybe just directing to people to the sticky would be good.
Its always good to help people, I wasnt having a go...many thanks for trying to help people
I am very disappoint :-( I tried every think . And finally using the official Rom of se.
Sent from my X10i using XDA App
I think you missed someone in the credits list.
Sent from my X10i using XDA App
Hzu said:
I think you missed someone in the credits list.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Guess you mean the_laser?
9Lukas5 said:
Guess you mean the_laser?
Click to expand...
Click to collapse
Yeah thankx, i forgot the...laser
I do it when im home on sunday, sorry to forgot him.
Remember sunday is my birthday!!!
Sent from my X10i phone
lex1986 said:
Yeah thankx, i forgot the...laser
I do it when im home on sunday, sorry to forgot him.
Remember sunday is my birthday!!!
Sent from my X10i phone
Click to expand...
Click to collapse
You can still edit posts from the phone app, long press on the post you need edit, click on modify, click on edit, then add the_laser
Sent from my X10i using xda premium
gregbradley said:
You can still edit posts from the phone app, long press on the post you need edit, click on modify, click on edit, then add the_laser
Sent from my X10i using xda premium
Click to expand...
Click to collapse
you happy now? Hahaha, just kiddin mate, its done and thanks for the info.
Sent from my X10i using XDA Premium App
after flashing azuzu downgrade I can't boot up, it's stuck at SE logo
I reflashed with stock, and tried flashtool's Unlock bootloader option, but I'm stuck there too at 'waiting for device'
bbluff said:
after flashing azuzu downgrade I can't boot up, it's stuck at SE logo
Click to expand...
Click to collapse
Because you now baseband and kernel for 2.1. Thats normal, now unlock your bootloader.
.....flash the azuzu kernel downgrade ftf with flashtool
disconnect usb cable, press power button until phone vibrates shortly and immidiatly connect the usb cable again......
---------- Post added at 12:42 PM ---------- Previous post was at 12:35 PM ----------
bbluff said:
after flashing azuzu downgrade I can't boot up, it's stuck at SE logo
I reflashed with stock, and tried flashtool's Unlock bootloader option, but I'm stuck there too at 'waiting for device'
Click to expand...
Click to collapse
Repair with seus, then root your phone with flashtool 0.4.2.0 and then unlocked bl.
bbluff said:
after flashing azuzu downgrade I can't boot up, it's stuck at SE logo
I reflashed with stock, and tried flashtool's Unlock bootloader option, but I'm stuck there too at 'waiting for device'
Click to expand...
Click to collapse
no man just read better:
then do this and download this
http://forum.xda-developers.com/showthread.php?t=1256430
if it no respond just wait, i must have his superuser action regonize
you must just wait mate and read the letters in the bootloader tool what it do with the superuser (he must get his acces), i got it to. you must do nothing.
just wait patiently and it gonna be alright.
Thanks, it worked. Sorry, it really was simple.
bbluff said:
Thanks, it worked. Sorry, it really was simple.
Click to expand...
Click to collapse
no problem mate, i told it`s working,
i do it with these steps, thats why im posting this.
yes its simple.
read, be smart and its working
cheers
I need some help with rooting my Sony Ericsson Xperia Neo (MT15i).
I have unlocked my bootloader following the official method. And now I want to root my device but somehow I can't get it done.
I've tried several methods icluding DoomLoRD. But nothing works.
Can somebody explain to me what i need to do?
Is there a way to make a complete backup of my device without having root? before I try rooting?
http://talk.sonymobile.com/thread/41119
This worked for me.
are you on stock GB or Stock ICS or any other customrom ??? which build ?
try to flas with a kernel that will root your devise too....like night-elf or shauve kernell (hope got the spelling right).........
@OP: http://forum.xda-developers.com/showthread.php?t=1678690
samneov said:
are you on stock GB or Stock ICS or any other customrom ??? which build ?
Click to expand...
Click to collapse
Do you see image he uploaded?
Thank you for the replies. I will give it another try this evening.
Sent from my MT15i using xda app-developers app
Try to flash custom kernel then go to cwm.
Sent from my MT11i using Tapatalk 2
Madfysh said:
@OP: http://forum.xda-developers.com/showthread.php?t=1678690
Do you see image he uploaded?
Click to expand...
Click to collapse
no man replied from office with stupid 2g connection ..... images seldom loads...!!!
Thanks for the tips. It worked. Now i have to figure out what to do with a rooted phone :fingers-crossed:
GleDel said:
Thanks for the tips. It worked. Now i have to figure out what to do with a rooted phone :fingers-crossed:
Click to expand...
Click to collapse
i have the same problem plz give me the process that u have followed after unlocking the bootloader ! nd is there anyway to c whether the ur phone is unlocked ?
Plz Plz put a process that u have followed !
stab2 said:
i have the same problem plz give me the process that u have followed after unlocking the bootloader ! nd is there anyway to c whether the ur phone is unlocked ?
Plz Plz put a process that u have followed !
Click to expand...
Click to collapse
I followed the link in the first reply to my question.
GleDel said:
I followed the link in the first reply to my question.
Click to expand...
Click to collapse
ok and is there any problem in doing it WIN 7 64 bit, cuz i have faced serious problems in unlocking bootloader while at win 7 64 bit, but as soon i worked it on my other pc which has xp 32 bit the process gone smooth without any hitch
ill follow the same link of ur 1st question reply, nd ill give u the news then !
Thanks
I also had some problems with unlocking the bootloader (on windows 7 64bit) at first, but after i turned of my antivirus everything worked just fine.
Even I have windows 7 64bit and I don't think there's any issue whatsoever!
I unlocked my bootloader only a few days back!
GleDel said:
I also had some problems with unlocking the bootloader (on windows 7 64bit) at first, but after i turned of my antivirus everything worked just fine.
Click to expand...
Click to collapse
Please dnt mind my questions m very new here, the link to ur 1st question refers to a page of sony where its says:
"How To Root 4.0.3
Just follow the instructions here Root
now this link goes to a thread, that says do it with doom lord: which is a pain !
should i go for the flashtool process instead, but that mentions the FW 4.0.4, where as i have the stock 4.0.3 ?
Plz Help !
Flashtool can't root ics fw's.
And if doomlord's toolkit is hard for you, then don't mess with your phone at all
How can it be hard, you set 2,3options and connect phone to pc, toolkit does all the job..
Madfysh said:
Flashtool can't root ics fw's.
And if doomlord's toolkit is hard for you, then don't mess with your phone at all
How can it be hard, you set 2,3options and connect phone to pc, toolkit does all the job..
Click to expand...
Click to collapse
what are u talking about ! dont u know why this thread was started, this thread started just cuz the doomlord process didnt worked ! look at the start of this thread, and who has started and what is he saying ! if u dont know here it is ! nd i will paste the reply of that thread
"I need some help with rooting my Sony Ericsson Xperia Neo (MT15i).
I have unlocked my bootloader following the official method. And now I want to root my device but somehow I can't get it done.
I've tried several methods icluding DoomLoRD. But nothing works.
Can somebody explain to me what i need to do?
Is there a way to make a complete backup of my device without having root? before I try rooting?"
The reply
http://talk.sonymobile.com/thread/41119
This worked for me.
The same guy i was asking to which process he followed if he has failed in doomlord process then he must have followed Flashtool one !
GleDel said:
Thanks for the tips. It worked. Now i have to figure out what to do with a rooted phone :fingers-crossed:
Click to expand...
Click to collapse
i have visited the same link http://talk.sonymobile.com/thread/41119
it says for version 4.0.3, nd then a thread that says doomlord, which i have already tried so many times wats the difference in this, i even tried this also it has only pushed the super user app which has no apps its just empty there is no significant change ! now plz explain that have u followed the doomlord process again or the flashtool and downloaded the Kernal for NEO V nd did the flashing process by using flashtool !
stab2 said:
what are u talking about ! dont u know why this thread was started, this thread started just cuz the doomlord process didnt worked ! look at the start of this thread, and who has started and what is he saying ! if u dont know here it is ! nd i will paste the reply of that thread
Click to expand...
Click to collapse
For start chill your horses.
I have eyes and I can read, so no need to copy/paste what has been written in this thread.
Second, I know why doomlord's root toolkit failed for OP. doomlords toolkit CAN root .562(also known as 4..0.3) but CAN'T root .431(4.0.4) fw, which is what flashing .562 kernel is needed in order to root.
I know the procedure, I wrote the tutorial(which I linked in post#4), after which guys from talk.sonymobile wrote it on their forum, just FYI.
stab2 said:
"How To Root 4.0.3
Just follow the instructions here Root
now this link goes to a thread, that says do it with doom lord: which is a pain !
should i go for the flashtool process instead, but that mentions the FW 4.0.4, where as i have the stock 4.0.3 ?
Click to expand...
Click to collapse
If you are on 4.0.3, doomlord CAN root your phone, if it can't, you are doing something wrong, in which case, we need to see log of that root process.
Flashtool is only used to flash 4.0.3 kernel, but that's for people on 4.0.4.
stab2 said:
The same guy i was asking to which process he followed if he has failed in doomlord process then he must have followed Flashtool one !
Click to expand...
Click to collapse
He failed with doomlord root toolkit because he had 4.0.4! He needed to flash kernel from 4.0.3, then use toolkit then flash back kernel from 4.0.4
stab2 said:
i have visited the same link http://talk.sonymobile.com/thread/41119
it says for version 4.0.3, nd then a thread that says doomlord, which i have already tried so many times wats the difference in this, i even tried this also it has only pushed the super user app which has no apps its just empty there is no significant change ! now plz explain that have u followed the doomlord process again or the flashtool and downloaded the Kernal for NEO V nd did the flashing process by using flashtool !
Click to expand...
Click to collapse
if doomlord's root toolkit FOR ICS, failed for you, provide log of that process.
Now I tell you another thing, which you would know if you read all post in this thread, specially link I gave above, you have unlocked your bootloader, ffs, you can root without any mess with root toolkits, simply flash/hotboot kernel with CWM and flash superuser zip. And enjoy your phone.
Tutorial on talk.sonymobile doesn't have part for unlocked bootloaders, that's why I linked my tutorial which have both parts.
He failed with doomlord root toolkit because he had 4.0.4! He needed to flash kernel from 4.0.3, then use toolkit then flash back kernel from 4.0.4
if doomlord's root toolkit FOR ICS, failed for you, provide log of that process.
U are rite 4.0.3 is workable in doomslord but only on this doomslord toolkit for xperia "DooMLoRD_v1_Xperia-2011-ICS-ROOT-emu-busybox-su"
it has pushed the SU properly nd installed it ! later i have downloaded CWM 5, so i 1st took Astro File Manager from the Market, for exploring the SD then installed the CWM 5, so when i did the SU asked to get the permission nd then all the options in CWM are ticked well and Su got CWM in its list, so all good and rooted, now please refer me the app that can solve the brightness issue in Neo V :good:
Thanx & Regards
now that i have rooted & all ! how will i go to fw .431 means 4.0.4 ? and if i flash 4.04 will my phone still be rooted ?
If u know a process of how to root in 4.0.4 nd can install su in it plz tell ! nd plz clarify me that CWM is necessary to have it 1st installed on the device or SU ?
Lets suppose ill clear the picture ... if i want to flash 4.0.4 with Kernal .431 my phone is open to root, but as u know the doomlords kit failed ! is there any otherway to push SU as a zip like ur mentioning that flash it with hotboot wats that how the process is going to be ?
Plz help !
I recently flashed a CM9 based rom on my Xperia Sola,but after flashing its touchscreen stopped working,don't know why?I tried flashing .54 ftf via flashtool,it installed perfectly but it didn't make touchscreen respond.Then i tried it repairing through SUS but to no avail.Does anybody here know what would've gone wrong because i haven't flashed any custom kernel on it(yep locked bootloader) and i don't think that a rom can damage hardware(i know 'cause i have been porting CM9 based roms on my sola and they worked perfectly without any flaw).Is it the calibration problem or something?Don't know what should i do now.....
(Don't know why i went with Sony even when i knew deep in my heart that i would regret:silly
SOLUTION-post#7
I also have this problem.no any help me this problem?
Odp: [Q] Touchscreen not working
You can't flash CM9 based roms on locked bl. How did you done that :? Try to install other Rom but now for locked bl. Or if you made backup just restore it
Sent from my LT22i using xda-developers app
Vaith said:
You can't flash CM9 based roms on locked bl. How did you done that :? Try to install other Rom but now for locked bl. Or if you made backup just restore it
Sent from my LT22i using xda-developers app
Click to expand...
Click to collapse
You can bro...you just need the correct ramdisk file....so yep..its possible...and can't install any other roms apart from stock ftf...
Re: [Q] Touchscreen not working
akp.ajinkya said:
You can bro...you just need the correct ramdisk file....so yep..its possible...and can't install any other roms apart from stock ftf...
Click to expand...
Click to collapse
bro touch screen usually gets faulty after a ftf flash of different device
bt this is the first time i read something different corrupting a touchscreen
no solution bro take it to a service center
Sent from my Xperia U using Tapatalk 2
drsanket_xperia_u said:
bro touch screen usually gets faulty after a ftf flash of different device
bt this is the first time i read something different corrupting a touchscreen
no solution bro take it to a service center
Sent from my Xperia U using Tapatalk 2
Click to expand...
Click to collapse
Yes the different device ftf may cause touchscreen fault due to driver mismatching/wrong kernel,but i was using Sola's ftf so that is ruled out.Although you are right that something different is corrupting the screen 'cause Xperia Mini had the same problem that was related to some rom flashing.
Or may be,the flashtool doesn't format all the partitions of the phone and there are some hardware files still lurking somewhere in the one of the partition thats causing the problem,but its just my guess.
I thought that only wrong kernel can cause hardware failure,didn't knew that a simple rom flash can do this,so lesson learnt:silly:
Restored my touchscreen functionality
hva8 said:
I also have this problem.no any help me this problem?
Click to expand...
Click to collapse
Time for small celebration:victory:....'cause my Xperia sola need not go to service center.
Yes i found the solution and its simple as a pea.....
Just flash the stock gingerbread via flashtool and there you go....touchscreen's functionality RESTORED.I guess i was correct about the wrong driver lurking in some partition...
Hey hva8 give the above prescribed medicine to your Sola...i'm sure it will get well soon
Didn't flash back to ICS but i guess there shouldn't be any problem now.
Touchsreen Xperia Go Problem
akp.ajinkya said:
Time for small celebration:victory:....'cause my Xperia sola need not go to service center.
Yes i found the solution and its simple as a pea.....
Just flash the stock gingerbread via flashtool and there you go....touchscreen's functionality RESTORED.I guess i was correct about the wrong driver lurking in some partition...
Hey hva8 give the above prescribed medicine to your Sola...i'm sure it will get well soon
Didn't flash back to ICS but i guess there shouldn't be any problem now.
Click to expand...
Click to collapse
Hello!
I have the same problem with my Xperia Go. I flashed the wrong firmware (for Xperia sola) and then the touchscreen did not work. It's possible to use flashmode and fastbootmode and to lock and unlock the bootloader.
So i tried a lot of kernels, firmware etc. and the method above - but nothing work.
Can You help me!!
Bob
Bobby Cool said:
Hello!
I have the same problem with my Xperia Go. I flashed the wrong firmware (for Xperia sola) and then the touchscreen did not work. It's possible to use flashmode and fastbootmode and to lock and unlock the bootloader.
So i tried a lot of kernels, firmware etc. and the method above - but nothing work.
Can You help me!!
Bob
Click to expand...
Click to collapse
Try the method given above...i.e install gingerbread firmware via flashtool,switch on your phone...run it for sometime,the touchscreen should work at this point.If yes,you can reflash stock ICS on your phone.Thats it.You can download GB firmware for Go from HERE.
Hope this helps.
akp.ajinkya said:
Try the method given above...i.e install gingerbread firmware via flashtool,switch on your phone...run it for sometime,the touchscreen should work at this point.If yes,you can reflash stock ICS on your phone.Thats it.You can download GB firmware for Go from HERE.
Hope this helps.
Click to expand...
Click to collapse
Thank you for your help, but it does not work. I tried GB .62 and .84 with flashtool ver 6.x and 9.x with locked and unlocked bootloader. The touchscreen keeps black only the buttons responds (vibrate by pressing) a short time.
I think it's time for service center
Thanks
Bob
Bobby Cool said:
Thank you for your help, but it does not work. I tried GB .62 and .84 with flashtool ver 6.x and 9.x with locked and unlocked bootloader. The touchscreen keeps black only the buttons responds (vibrate by pressing) a short time.
I think it's time for service center
Thanks
Bob
Click to expand...
Click to collapse
By 'touchscreen keeps black' you mean that there is no display,that there may be some hardware fault,You should take it to the sevice center.
the solution isn't work me.the phone flash with all 2.3.7 android with flash tool but my touch not working.no any solution with problem
hva8 said:
the solution isn't work me.the phone flash with all 2.3.7 android with flash tool but my touch not working.no any solution with problem
Click to expand...
Click to collapse
Does the touchscreen fault occured after flashing a rom/mod or after a physical damage?
If it is related to some physical damage,the solution won't work and you have to send it to service center.
akp.ajinkya said:
Time for small celebration:victory:....'cause my Xperia sola need not go to service center.
Yes i found the solution and its simple as a pea.....
Just flash the stock gingerbread via flashtool and there you go....touchscreen's functionality RESTORED.I guess i was correct about the wrong driver lurking in some partition...
Hey hva8 give the above prescribed medicine to your Sola...i'm sure it will get well soon
Didn't flash back to ICS but i guess there shouldn't be any problem now.
Click to expand...
Click to collapse
Thanks for this ..
XperiaMT27 said:
Thanks for this ..
Click to expand...
Click to collapse
Glad to help you bro.Never say thanks...just press it instead.It means a lot.
Hello everyone,
I have joined here hoping to get some advice, so i will be as complete with my situation as i can.
So, i rooted my phone, installed busybox, root explorer and CWM. No problems so far.
Read up on rom installations and attempted my first one. Cannot remember the rom at the moment but followed instructions as in "back up", wipe cache etc....
Now the phone is in bootloop, whereby it switches on, goes to sony erricson screen, blue light flashes and then goes blank. I cannot enter CWM, i cannot switch off until i remove battery.
I have tried both pc companion repair and seus repair but both say no software for phone(pc companion) and newest software installed(seus).
I have tried booting into safe mode the old fashioned way, but no go and finally....i have shouted obscenities at my phone but that doesn't work either.:silly:
any suggestions, or should i assume that it is bricked and send off for repair if possible?
Thank you.
Hey bro have you locked or unlocked bootloader?
Flash stock .587 firm with flashtool.
Some roms are only for locked or unlocked bootloader. You need to see that before install a rom. And remember. Not all the roms are stable.
Follow step by step. Is recomendable before install a rom. Flash stock firm.
Press thnks if I help to your mind.
Press thnks if I helped to your mind.
Sent from my SK17i using xda premium
luiscedillo80 said:
Hey bro have you locked or unlocked bootloader?
Flash stock .587 firm with flashtool.
Some roms are only for locked or unlocked bootloader. You need to see that before install a rom. And remember. Not all the roms are stable.
Follow step by step. Is recomendable before install a rom. Flash stock firm.
Press thnks if I help to your mind.
Press thnks if I helped to your mind.
Sent from my SK17i using xda premium
Click to expand...
Click to collapse
Thanks for your advice.:good:
I went it alone last night and used flashtool to restore a stock rom that i had found and downloaded, and it worked apart from one thing..............the touchscreen will not work now
I have no option to unlock the bootloader according to my phone info, so i will try this .587 firmware you mentioned. Could you provide a link if possible and any advice on the touchscreen.
Many thanks!!
jedi1972 said:
Thanks for your advice.:good:
I went it alone last night and used flashtool to restore a stock rom that i had found and downloaded, and it worked apart from one thing..............the touchscreen will not work now
Many thanks!!
Click to expand...
Click to collapse
hey man here you go this is the stock .587 ICS
http://forum.xda-developers.com/showthread.php?t=1907994
and here is the tuto to flash ftf files with flashtool. the issue with touchscreen sometimes happen when you flash wrong firmware.
http://forum.xda-developers.com/showthread.php?t=2240614
press thnks if i help to your mind. :highfive:
luiscedillo80 said:
hey man here you go this is the stock .587 ICS
http://forum.xda-developers.com/showthread.php?t=1907994
and here is the tuto to flash ftf files with flashtool. the issue with touchscreen sometimes happen when you flash wrong firmware.
http://forum.xda-developers.com/showthread.php?t=2240614
press thnks if i help to your mind. :highfive:
Click to expand...
Click to collapse
Spot on sir, i'll report back....
ismingr the
jedi1972 said:
Spot on sir, i'll report back....
Click to expand...
Click to collapse
Touchscreen problem persists. I will try an older firmware. I'm pretty sure that since sony rolled out the ics update, the problem has arisen......
Just noticed in flashtool that is says file ignored warning simlock.ta??
jedi1972 said:
Touchscreen problem persists. I will try an older firmware. I'm pretty sure that since sony rolled out the ics update, the problem has arisen......
Just noticed in flashtool that is says file ignored warning simlock.ta??
Click to expand...
Click to collapse
Well, i have tried several different official firmwares but the touchscreen problem persists. I will update on official sony companion and use my warranty to get it replaced. ho hum.
jedi1972 said:
Touchscreen problem persists. I will try an older firmware. I'm pretty sure that since sony rolled out the ics update, the problem has arisen......
Just noticed in flashtool that is says file ignored warning simlock.ta??
Click to expand...
Click to collapse
Simlock is normal because your phone is unlocked. But the screen dont work for nothing?. If work little instalL CWM app. Well if you have guaranty go there. If not. Search a tuto how to open you phone and check the conections and "flex"
Press thnks if I help to your mind.
Sent from my SK17i using xda premium
Last Night i updating my Sony Xperia Neo V with doom lord's flash tool but, completion of 99% my laptop was shutdown so its not able to complete installation please check the image ang give me proper solution i already ask to service center but they not able to solve that problems u were my last hops.....
Thanks
tushar1988 said:
Last Night i updating my Sony Xperia Neo V with doom lord's flash tool but, completion of 99% my laptop was shutdown so its not able to complete installation please check the image ang give me proper solution i already ask to service center but they not able to solve that problems u were my last hops.....
Click to expand...
Click to collapse
is your mobile rooted & unlocked ... with flashtool are you flashing ftf of kernel, clear explanation
If I'm not wrong, you should still be able to flash stock gb or ics via flashtool.
This means that if you're looking for a way to get your data back, you probably won't be able to...
Sent from my Xperia Neo V using xda app-developers app
tushar1988 said:
Last Night i updating my Sony Xperia Neo V with doom lord's flash tool but, completion of 99% my laptop was shutdown so its not able to complete installation please check the image ang give me proper solution i already ask to service center but they not able to solve that problems u were my last hops.....
Thanks
Click to expand...
Click to collapse
Happened with me too...just download any kernel with a recovery..(you'll find one in custom rom's zips) flash it and wipe everything you can except for your sdcard. Then flash the firmware you want to have via flashtool
or repair phone with official Sony software
deccen90 said:
is your mobile rooted & unlocked ... with flashtool are you flashing ftf of kernel, clear explanation
Click to expand...
Click to collapse
no Its not Rooted Or Unlocked .......
tushar1988 said:
no Its not Rooted Or Unlocked .......
Click to expand...
Click to collapse
If your phone is not unlocked why u are using flashtool..
deccen90 said:
If your phone is not unlocked why u are using flashtool..
Click to expand...
Click to collapse
what do you mean sir? even if he's not rooted, he can still use flashtool to flash stock firmwares... and other ftfs
Cheers,
AJ
Abhinav2 said:
what do you mean sir? even if he's not rooted, he can still use flashtool to flash stock firmwares... and other ftfs
Cheers,
AJ
Click to expand...
Click to collapse
may be he meant, he can use SEUS to update phone instead of flashtool!!
Regards,
vishal_android freak
vishal_android freak said:
may be he meant, he can use SEUS to update phone instead of flashtool!!
Regards,
vishal_android freak
Click to expand...
Click to collapse
Oh ok...well ya good point thanks for the heads up
Cheers,
AJ
no worries.. getting back to the topic, i feel you should try both, flashtool and SEUS update!! flashtool should definitely work i feel,!
Regards,
vishal_android freak
deccen90 said:
If your phone is not unlocked why u are using flashtool..
Click to expand...
Click to collapse
we can use different firmware to root phone i didn't unlock my phone normally
i prefer xda guide but now i tried every thing my phone not even starting so i m not able to install any other firmware because if u want to install another firmware u r phone should be in working condition. please suggest me some way i tried to sony service center but even they also dont have solution, they told me that i have to replace main bord and it will cast 80% of my phone. so please help me if anyone know how to solve this issue please tell me.
vishal_android freak said:
no worries.. getting back to the topic, i feel you should try both, flashtool and SEUS update!! flashtool should definitely work i feel,!
Regards,
vishal_android freak
Click to expand...
Click to collapse
i tried via flashtool with SEUS update but its not working.
tyrexs said:
If I'm not wrong, you should still be able to flash stock gb or ics via flashtool.
This means that if you're looking for a way to get your data back, you probably won't be able to...
Sent from my Xperia Neo V using xda app-developers app
Click to expand...
Click to collapse
i tried but still not working
Download full firmware..turn off devices,press and hold back key.flash with flashtool.
How about your step?is it same as mine?
---------- Post added at 06:57 PM ---------- Previous post was at 06:56 PM ----------
Download full firmware..turn off devices,press and hold back key.flash with flashtool.
How about your step?is it same as mine?