[Q] Kies doesnt show Firmware info neither updates - Galaxy S II Q&A, Help & Troubleshooting

Hi,
I've been looking around for a week already and can't figure this out, was wondering if anyone could give me some advice.
Im running Kies version 2.0.3.11082_152. When I plug my SGS2 it prompts and gets to back up as normal but on summary it doesnt show my Firmware information and when I check for update it is just blank.
PDA: BOKG2
Phone: BOKG1
CSC: TMUKF1
Im still running Gingerbread 2.3.3 on T-Mobile (UK) and was wondering how can I update my Firmware other than Odin.
I spoke to T-Mob and they asked me to contact Samsung who wants me to take the phone to one of their authorized services but I'm not looking for all this hassle and just wanna get to update as normal.
Any helpfull input is more than welcome, Im still learning the way of the device and its being my 2nd week of use.
Really appreciate the help!

Hold "home+power+volume up" and see if you can get into stock recovery mode.If you cant then you firmware is not properly flashed into you phone.Your verion is here on XDA so you could re-flash it,it would still be stock and Kies might then recognize it.Also updates are regional and carrier based so if your carrier doesnt have the latest above 2.3.3 then there wont be any update either.Looking at the carrier firmware list the firmware you have stated is the latest here on XDA for T-Mobile UK so its posible that there isnt any update yet.

Thanks for your reply.
I did manage to get on recovery mode and about the T-mob firmware, I cant confirm there is one available but I assume there should be something wrong for the fact that I cant check my firmware info on kies.
I 'll probably try to flash same rom on odin.
When I was checking the T-Mob roms here, I cant discern which version of firmware it is. The details about about PDA / Phone / CSC has anything with it? I mean, how do I find which is 2.3.3 from 2.3.4 if any.
Thanks again for helping understanding.

O_Kara said:
Thanks for your reply.
I did manage to get on recovery mode and about the T-mob firmware, I cant confirm there is one available but I assume there should be something wrong for the fact that I cant check my firmware info on kies.
I 'll probably try to flash same rom on odin.
When I was checking the T-Mob roms here, I cant discern which version of firmware it is. The details about about PDA / Phone / CSC has anything with it? I mean, how do I find which is 2.3.3 from 2.3.4 if any.
Thanks again for helping understanding.
Click to expand...
Click to collapse
Goto this link and get Odin v1.85 if you dont already have it
http://forum.xda-developers.com/showthread.php?t=1075278
You will see it almost right at the top where it says "FLASHING FIRMWARE WITH ODIN"
Then go to this one and scroll down to T-MOBILE and find UK.You will see the firmware you stated is the last on the list.This is because it hasnt been updated yet or there is no update.Anway,thats your download link.
http://forum.xda-developers.com/showthread.php?t=1113928
The first link explains it all.Odin is downloaded as a ZIP file.For the firmware when downloaded you just need to double click to get the extract menu.No Password.The firmware goes in PDA and without marking anything else hit the start button.That easy
EDIT:One more thing.Im one WIN7 and sometimes my antivirus gives a warning and gives the typicall red menu and all that.Dont worry its not a virus.Just hit the execute button or whatever yours shows and its all good.Its just the way your antivirus and firewalls are set to detect incoming stuff

O_Kara said:
I mean, how do I find which is 2.3.3 from 2.3.4.
Click to expand...
Click to collapse
cooza said:
Goto this link and get Odin v1.85 if you dont already have it
http://forum.xda-developers.com/showthread.php?t=1075278
You will see it almost right at the top where it says "FLASHING FIRMWARE WITH ODIN"
Then go to this one and scroll down to T-MOBILE and find UK.You will see the firmware you stated is the last on the list.This is because it hasnt been updated yet or there is no update.Anway,thats your download link.
http://forum.xda-developers.com/showthread.php?t=1113928
The first link explains it all.Odin is downloaded as a ZIP file.For the firmware when downloaded you just need to double click to get the extract menu.No Password.The firmware goes in PDA and without marking anything else hit the start button.That easy
EDIT:One more thing.Im one WIN7 and sometimes my antivirus gives a warning and gives the typicall red menu and all that.Dont worry its not a virus.Just hit the execute button or whatever yours shows and its all good.Its just the way your antivirus and firewalls are set to detect incoming stuff
Click to expand...
Click to collapse
Hi mate, I really appreciate your help! I did found those threads previously but as I stated before, I cant discern the difference from one firmware to the other. Its very noobish but I'm looking very much to learn.
This are the versions on the thread:
T-Mobile UK
BOKE3:http://www.multiupload.com/GY05UJM6DQ
Firmware info: PDA:BOKE3|PHONE:BOKD1|CSC:TMUKE3
BOKE3 Stock Kernel: http://www.multiupload.com/I41CAJ2BLS
Password: [email protected]
BOKF3:http://www.multiupload.com/15O4TE3FBT
Firmware info: PDA:BOKF3|PHONE:BOKF1|CSC:TMUKF1
BOKF3 Stock Kernel: http://www.multiupload.com/7EDUOBEYZW
Password: [email protected]
BOKG2:http://www.multiupload.com/VY5KOFVJHL
Firmware info: PDA:BOKG2|PHONE:BOKG1|CSC:TMUKF1
BOKG2 Stock Kernel: http://www.multiupload.com/TD5QBFPCIH
Password: [email protected]
I believe mine is the Firmware info: PDA:BOKG2|PHONE:BOKG1|CSC:TMUKF1 cause it matches mine so I assume its the version 2.3.3 but is there anyway of finding out from reading it? Like looking at those codes you know which version it is.
Sorry, I dont mean to be a pain for asking so much but I wish to understand how it is.
Also, I've spoken to samsung who confirmed T-Mob UK has version 2.3.4 for SGS2 available so I should be able to upgrade through Kies but Kies is rubbish and is stating my firmware as the latest.
I again appreciate all the help!

"androidforums.com/samsung-galaxy-s2-international/387520-understanding-csc-kernel-etc.html"
I found this thread on another forum which helped me to understand better what I was asking, I hope it can help more ppl as well.
Many thanks for all those that helped including the guys from "androidforums.com"
Also, I was rechecking the roms available and the one on my device is the latest listed on the branded firmwares, I wonder what would Samsung guys flash on my device if I take to their service centre, not looking for that anyway!
All the best!
PS: Cant post links yet, sorry for the mess.

Related

Firmware upgrade Confusion

First off i couldn't find an answer so i created this post so apologies if it is a repeat.
I FINALLY managed to connect my phone to that appalling software known as 'KIES'.
KIES informed me that the following firmware is available for me to upgrade to:
'PDA:KI4/ PHONE:KL1/CSC:KH2 (XEU)'
Could you help me as to where to find this firmware version. if it is official etc. Phone Details below:
Thanks.
I am from Wales,UK and purchased it from Carphone warehouse. Network carrier: Orange.
My Phone details:
android version
2.3.3
Basband Version i9100xxke7
Build number
GINGERBREAD.XWKF3
kernel version
2.6.35.7-I9100XWKF3-CL276555
[email protected] #2
Here http://forum.xda-developers.com/showthread.php?t=1075278 you can find all the different firmware for the samsung galaxy sII with a tutorial to install it !
Thanks for the link but i already have it. im just unsure of which one i need.
Kies is offering you the correct firmware but you dont want it .
In which case a stock Samsung firmware is required and that means any or to match KI4 from the link .
The CPW KI4 is posted
jje
Thanks for your reply. I am currently Downloading the xwkI4 Firmware.
Is there a reason why i wouldnt want it?
Thanks.
shmiffy24 said:
Thanks for your reply. I am currently Downloading the xwkI4 Firmware.
Is there a reason why i wouldnt want it?
Thanks.
Click to expand...
Click to collapse
No just your post >>Kies offers the download but you want to find it somewhere else which will not be the same as what Kies is giving you to download .
jje
i have followed the odin guide and Fail has shown up on the odin screen.. im guessin thats NOT good... :S
issues resolved and success. Thanks for the help.

[Q] Need unbranded Australian firmware

Howdy.
Hoping some one can direct me to a working unbranded firmware for SG2.
I have obtained one listed at Sammobile:
I9100XWLP8_I9100XSALP4_XSA
4.0.3 2012 April I9100XSALP4 Australia
But it is not in english (I think it's polish or something) and just crashes the phone so another working one would be more useful I think.
If anyone could point me in the right direction I'd appreciate it.
Also, assuming a working firmware exists, is it likely that the phone will stop crashing on start up or is something else likely to be causing this problem. Thanks.
trebleguy said:
Howdy.
Hoping some one can direct me to a working unbranded firmware for SG2.
I have obtained one listed at Sammobile:
I9100XWLP8_I9100XSALP4_XSA
4.0.3 2012 April I9100XSALP4 Australia
But it is not in english (I think it's polish or something) and just crashes the phone so another working one would be more useful I think.
If anyone could point me in the right direction I'd appreciate it.
Also, assuming a working firmware exists, is it likely that the phone will stop crashing on start up or is something else likely to be causing this problem. Thanks.
Click to expand...
Click to collapse
1. Wrong forum
2. Flash this firmware, it's the newest unbranded one and contains all the languages.
Thanks for that. I can't find a link on the web page to down load the firmware.
You can get I9100XWLP8/I9100XSALP4/I9100XXLPS/I9100XWLP8 which is unbranded AU stock ICS from Checkfus. Search for the PC version on here/Google. Then choose Android/I9100/Australia GT-I9100LKJXSA in the pulldown boxes. On the left hand side it will populate the product code/PDA/CSC/phone fields, then click 'check firmware'. This will give you the the details I mentioned in the first line.
From there, click 'download' & it will download/decrypt an Odin flashable firmware package you can flash following the usual instructions for flashing firmware with Odin (put the package you download in the PDA section of Odin).
Thanks for that,
Does anyone have a straight link to a download please. I'm not in a position to install software just to obtain a download.
Also can anyone advise why the device boots in to a non english language when loading Australian firmwares.
I have tried about 5 different "Unbranded australian firmwares" and they all boot in some language I can't work out. It's eastern european or something.
The phone must be in out of box state when these firmwares are loaded because it doesn't just boot up like when I first got it. There are a series of what appear to be questions I have to answer before the phone will start up. Then it crashes.
Also does anyone know why it would just crash on a new firmware that apparently eveyone else can use without problems. Is there something else I need to install apart from the firmware?
Do I need a kernel or something else with these firmwares?
Any useful help appreciated. Thanks
Does everyone have to read in those characters in the box before they have to post. I find it very difficult to read whats in the boxes. It takes 5 or 6 attempts before this forum accepts my codes.
I found a web site where you can lookup if there are firmwares available.
I'm not allowed to post it
its the home page for that checkfus program
Unfortunately there are none for Australia. Can anyone suggest a working set of droid OS downloads I can use to get this phone working again please?
Full wipe, flash stock ROM, it will be in English.
There are many stock roms for Australia at Sammobile.
You can also use check fus down loader
I am still trying to get a download for unbranded Aust stock ROM GTI9100. Sammobile does not recognise a search for this phone so maybe they no longer support it. I agree trying to get a simple download without having to join another site or get hit with malware is well nigh impossible it seems.
Hi @trebleguy , install this first .
The ROM contains all languages.
Model GT-I9100
Model name GALAXY S Ⅱ
Country Australia
Version Android 4.1.2
Changelist 889555
Build date Tue, 19 Feb 2013 01:59:05 +0000
Security Patch Level N/A
Product code XSA
PDA I9100XWLSH
CSC I9100XSALSA
Click to expand...
Click to collapse
I9100XWLSH

Official Branded Kernel/ROM

Hello,
I'm attempting to return my I9100 to stock so I can update via KIES as I wish to sell it, after rooting, flashing ICS, playing around for a month etc...
It was originally a T-mobile handset, I used checkfus to find the original stock ROM, and I've downloaded it, however, I cannot get hold of the stock kernel for love nor money! (I've googled it, found one apparent alternative source, but for some reason it wont boot using this and just keeps looping through the T-mobile branded load-up screen)
The kernel I'm after is the following:
UK
BOKE3:http://www.multiupload.com/GY05UJM6DQ
Firmware info: PDA:BOKE3|PHONE:BOKD1|CSC:TMUKE3
BOKE3 Stock Kernel: http://www.multiupload.com/I41CAJ2BLS
Password: [email protected]
From this thread:
[ROMS]Official i9100 carrier branded firmware download for Odin Flash
http://forum.xda-developers.com/showthread.php?t=1113928
I've read the thread and checked both Sammobile and Samsung-update and neither has the BOKE3 Kernel.
If anyone has this, please, please could you upload it so I can return my handset to stock, I would really appreciate it.
Also, if I'm doing anything obviously wrong, please point me in the right direction, I am a n00b at this. (I've successfully reset my counter using triangle away, and flashed the ROM from checkfus, but KIES still says NO!)
Many thanks!
Luke
ps. I realise now I should have backed up my stock kernel and ROM before tweaking, stupid stupid stupid...
I stopped reading somewhere when you say you downloaded using checkfuS and now after a stock kernel.........
Buddy ROM package like you get from checkfus is whole thing including kernel.
Just flash the ROM using Odin.
But be sure its for i9100 if you have that.
andjusticeforall said:
Hello,
I'm attempting to return my I9100 to stock so I can update via KIES as I wish to sell it, after rooting, flashing ICS, playing around for a month etc...
It was originally a T-mobile handset, I used checkfus to find the original stock ROM, and I've downloaded it, however, I cannot get hold of the stock kernel for love nor money! (I've googled it, found one apparent alternative source, but for some reason it wont boot using this and just keeps looping through the T-mobile branded load-up screen)
The kernel I'm after is the following:
UK
BOKE3:http://www.multiupload.com/GY05UJM6DQ
Firmware info: PDA:BOKE3|PHONE:BOKD1|CSC:TMUKE3
BOKE3 Stock Kernel: http://www.multiupload.com/I41CAJ2BLS
Password: [email protected]
From this thread:
[ROMS]Official i9100 carrier branded firmware download for Odin Flash
http://forum.xda-developers.com/showthread.php?t=1113928
I've read the thread and checked both Sammobile and Samsung-update and neither has the BOKE3 Kernel.
If anyone has this, please, please could you upload it so I can return my handset to stock, I would really appreciate it.
Also, if I'm doing anything obviously wrong, please point me in the right direction, I am a n00b at this. (I've successfully reset my counter using triangle away, and flashed the ROM from checkfus, but KIES still says NO!)
Many thanks!
Luke
ps. I realise now I should have backed up my stock kernel and ROM before tweaking, stupid stupid stupid...
Click to expand...
Click to collapse
Why don't you just download and flash latest ICS ROM with UK support?
Do you really need the branded version?
Just have a look at Intratech's other thread => http://forum.xda-developers.com/showthread.php?t=1075278
I recommend XWLPD, as this has best balance between performance and battery life on my phone.
If you want to go bak to GB, then flash XWLA4, which was best GB ROM IMO.
Thank you so much atifsh!
I did wonder whether the firmware download from CheckFus included the kernel, but couldn't figure it out (I'm stupid, I know! I'm new at this stuff...)
It's definitely the i9100 (checked under battery), it's definitely a T-mobile UK handset (bought it from a T-mobile customer who provided the contract paperwork).
Last night I tried flashing the latest T-mobile firmware, but KIES didn't like it, so tried flashing the BOKE3 firmware (oldest T-mobile branded firmware) and it didn't like that either.
Someone mentioned that when flashing you need to add the firmware file to the CSC section of odin to reset the CSC code, is this correct? I normally only include it in the PDA section.
This may be the problem I'm having as when I check my CSC using *#272*IMEI# it only lists CPW (carphone warehouse) and not TMU (T-mobile). Does this make sense as to why KIES wouldn't recognise the firmware?
I really appreciate your input and help here. Many thanks!
Luke
Hi It_ler,
Thanks for the advice, I was running the latest ICS firmware from the official thread, however I've decided to sell the device and would like to restore it to stock so that whomever I sell it to can update it through the official methods if they so wish.
Hope that makes sense!
Luke
Remove Sim, remove external sdcard.
Put the firmware.md5 in pda
Put your phone in download mode
after flash and boot dial *2767*3855#
It will wipe your phone and hopefully fix your csc.
Atifsh,
Thank you SO much! You saved my bacon. It worked when I did the *2767*3855# reset, this fixed the CSC and then the phone could update via KIES.
I really appreciate you help,
Many thanks,
Luke

[Q] Updating i9100 from Gingerbread 2.3.5

I'm entirely new to this so try to bear with me
I recently bought a Galaxy SII from a one day deals store and it arrived running Gingerbread 2.3.5. I want to update to the latest version available for the SII however the OTA update won't connect to the server and Kies (after at least two hours trying to get it to recognise my device) has told me that my current firmware can't be updated. Unless someone knows an obvious fix for Kies I guess I'm stuck with having to flash the new firmware using Odin. I'm using a guide on CNET (unfortunately I can't post links yet) that goes through installing ICS but replacing ICS with Jelly Bean.
The biggest problem is which firmware to get. My CSC code is OXA (Open Europe). Do I have to find firmware that matches that or can I just chose any one that I please then follow the guide that I'm using? I've been looking on SamMobile and there is a lot of different regions to chose from but none of them have the OXA CSC code and I don't know what to do. Also, is there anything I should look out for? I don't want to brick my phone.
Thanks in advance for your help. I'm sure it gets tiresome helping people like me.
Aleatoire said:
I'm entirely new to this so try to bear with me
I recently bought a Galaxy SII from a one day deals store and it arrived running Gingerbread 2.3.5. I want to update to the latest version available for the SII however the OTA update won't connect to the server and Kies (after at least two hours trying to get it to recognise my device) has told me that my current firmware can't be updated. Unless someone knows an obvious fix for Kies I guess I'm stuck with having to flash the new firmware using Odin. I'm using a guide on CNET (unfortunately I can't post links yet) that goes through installing ICS but replacing ICS with Jelly Bean.
The biggest problem is which firmware to get. My CSC code is OXA (Open Europe). Do I have to find firmware that matches that or can I just chose any one that I please then follow the guide that I'm using? I've been looking on SamMobile and there is a lot of different regions to chose from but none of them have the OXA CSC code and I don't know what to do. Also, is there anything I should look out for? I don't want to brick my phone.
Thanks in advance for your help. I'm sure it gets tiresome helping people like me.
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/1/?model=GT-I9100&pcode=OXA#firmware
There you go OXA It seems open Europe ended at 2.3.5 .. No wonder you can't update.. Anyway Poland's firmware should work just fine. Or just search the firmware of your own region. Do remember to do a factory reset after flashing JellyBean!
Alternately I recommend this. http://forum.xda-developers.com/showthread.php?t=1544487 Its the latest firmware Samsung has to offer.
-Grift- said:
There you go OXA It seems open Europe ended at 2.3.5 .. No wonder you can't update.. Anyway Poland's firmware should work just fine. Or just search the firmware of your own region. Do remember to do a factory reset after flashing JellyBean!
Click to expand...
Click to collapse
Thanks for the speedy reply. I think I understand now. The CSC is really only relevant to your current version. If I flash Jelly Bean from another region the CSC will just change to that region and still work as normal? Does it have any effect whatsoever on the function of the phone?
Aleatoire said:
Thanks for the speedy reply. I think I understand now. The CSC is really only relevant to your current version. If I flash Jelly Bean from another region the CSC will just change to that region and still work as normal? Does it have any effect whatsoever on the function of the phone?
Click to expand...
Click to collapse
Yes CSC is bundled with the firmware. Dunno why but every time I flash a firmware it does not come with CSC and I must flash it manually.. Now that's a whole other story. If you plan on flashing a firmware not related to you region e.g you flash a European firmware while you stay in Asia then the CSC is quite pointless as kies won't let you update through it anyway. That said you must have the correct CSC/Firmware/Modem and region to recieve official updates through Kies. If not updating via Odin is good as well .
-Grift- said:
Yes CSC is bundled with the firmware. Dunno why but every time I flash a firmware it does not come with CSC and I must flash it manually.. Now that's a whole other story. If you plan on flashing a firmware not related to you region e.g you flash a European firmware while you stay in Asia then the CSC is quite pointless as kies won't let you update through it anyway. That said you must have the correct CSC/Firmware/Modem and region to recieve official updates through Kies. If not updating via Odin is good as well .
Click to expand...
Click to collapse
Well I live in New Zealand and the phone that I have has the European CSC code. The site that I got it from is called 1-day who claim to find the best prices from around the world in order to give ridiculously low prices. I assume that means that my phone came all the way over from Europe. Based on what you say then, I assume then that the CSC wouldn't matter in my case anyway as even stock, my CSC is in the wrong region?
Aleatoire said:
Well I live in New Zealand and the phone that I have has the European CSC code. The site that I got it from is called 1-day who claim to find the best prices from around the world in order to give ridiculously low prices. I assume that means that my phone came all the way over from Europe. Based on what you say then, I assume then that the CSC wouldn't matter in my case anyway as even stock, my CSC is in the wrong region?
Click to expand...
Click to collapse
Its OK at most bring it down to Samsung service centre and ask them to update your phone to the latest they have. They should be more then happy to help.
-Grift- said:
Its OK at most bring it down to Samsung service centre and ask them to update your phone to the latest they have. They should be more then happy to help.
Click to expand...
Click to collapse
Awesome, thanks for your help. I'm fine with just flashing it with Odin. I was planning to root it anyway. I'm just trying to find out as much as I can before I try.

Updating galaxy s3 to Android 4.3

Hi, i have a Galaxy s3 runing android 4.1.2, iv'e been trying to update it to 4.3 via kies, but i keep getting the message "your device's current firmware version is not supported to update firmware via kies". iv'e searched the problem over the web and i could not figure out the main reason for this. I noticed the main cause was the CSC and phone salse code didnt match. My CSC is I9300OJVEMA1, and as for the phone sales code-i don't know how to find it. ill be gratefull to anyone who could just explain and simplify the meaning of the codes and how to solve this problem as i could not understand from the different answeres over the web.
Thanks in advance
bump
Learn to use the search function before making threads. Download a firmware and flash via odin. Explained here > http://forum.xda-developers.com/showthread.php?t=1922461
You will need stock firmware available from www.sammobile.com . Doesnt matter which country's you flash. CSC and PDA codes change by version as far as i know.
Thank you for your reply. i am aware of the search function but as i said, i wasn't sure if this was the right thing to do. once i flash any of the firmware, will i be able to update via kies normally?
shaiko said:
Thank you for your reply. i am aware of the search function but as i said, i wasn't sure if this was the right thing to do. once i flash any of the firmware, will i be able to update via kies normally?
Click to expand...
Click to collapse
That is not 100% that Kies or OTA will recognize firmware ,see multiple identical questions .

Categories

Resources