PLS HELP! My GS2 turns on by itself + video - Galaxy S II Q&A, Help & Troubleshooting

http://www.youtube.com/watch?v=2V9BcYmwfDg
I dont know what should i do coz now i cant go to CWM or to Download mode .. even i cant charge my phone normaly
IF I turn off my phone from CWM it turns on in CWM mode , if i turn off my phone from desktop it tuns on to desktop..

Clean your usb connector on the bottom with a dry toothbrush.

me too having the same problem.. i dont know what to do...
if battery health show : Good then this was the problem
if the battery health shows: over voltage..
if we insert the battery...
screen automatically turns on with a battery icon and flashes to empty battery with warning triangle
please anyone please help to slove this problem

prodygee said:
Clean your usb connector on the bottom with a dry toothbrush.
Click to expand...
Click to collapse
I tryed but didnt helped

rohi said:
me too having the same problem.. i dont know what to do...
if battery health show : Good then this was the problem
if the battery health shows: over voltage..
if we insert the battery...
screen automatically turns on with a battery icon and flashes to empty battery with warning triangle
please anyone please help to slove this problem
Click to expand...
Click to collapse
YOu get this error too?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

The above error is completely related to the battery. If you try a different battery, you won't get this error.

My phone is in charge mod all the time thats why im loosing soo much battery ..

if a phone is acting strange
RETURN IT TO SAMSUNG !!!

Evollution said:
My phone is in charge mod all the time thats why im loosing soo much battery ..
Click to expand...
Click to collapse
Do you turn off your phone + take out the battery or is it crashing or anything ? The graph in your screenshot has some "skips" down - you did not lose so much battery, its just the phone loosing or not saving the data in certain situations like crashing or pulling the batty i suppose. I created a thread about it in the General section, you can check there
[ GT-I9100 ] XDA APP SO TASTY WITH MY SLOW INTERNET OMNOMNOM
If i helped you in sure its easy to press that lil' pretty "Thanks" button

can you give me the link to your theard
you can see from 75% to 100 in a second ..

Yes evollution.. Im having the same problem...
Battery icon with yellow warning triangle..
Sent from my GT-I9100 using XDA App

So far i hove no longer this problem
Sent from my GT-I9100 using XDA App

how solve problem?

Evollution said:
So far i hove no longer this problem
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Having the same problem, how did you fix it ???

optimus950 said:
Having the same problem, how did you fix it ???
Click to expand...
Click to collapse
I had a same problem a few months ago. Phone turned on automaticly or I couldn't turn on a phone, because I get this warning triangle. It is something to do with USB port - is dirty or has oxidised. I cleaned my USB port and it solve this problem...

-A-P-M- said:
I had a same problem a few months ago. Phone turned on automaticly or I couldn't turn on a phone, because I get this warning triangle. It is something to do with USB port - is dirty or has oxidised. I cleaned my USB port and it solve this problem...
Click to expand...
Click to collapse
Thanks for your help
Already tried it mate, didn't work in my case.
Phone just turn itslef back on though i cleaned its USB port by a dry toothbrush.

My problem disappeared by itself just do not take your phone to the bathroom and in max 4 weeks your problem will disappear
Sent from my Pemium GT-I9100 using XDA developers app

Evollution said:
My problem disappeared by itself just do not take your phone to the bathroom and in max 4 weeks your problem will disappear
Sent from my Pemium GT-I9100 using XDA developers app
Click to expand...
Click to collapse
Thanks for ur help mate

Lol.. What a funny help there! The phone has nothing to do with the bathroom. Hahaha
Sent from my GT-I9100 using xda premium

How someone can fix this problem????

Related

[Q] pleeeeeeeeeeeeese help me

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
when I install a new motherboard for my pc I reverse the USB cable into the motherboard.
when I turn off the phone( galaxy s2 ) it does not go out really, there are two alternates image, one with a battery and an empty battery with a yellow triangle and a thermometer.
And to restart I have to remove the battery and once I remove it several times!
Now I have MTP application all the time when I have unlocked a few seconds to go in the menu or I'm stuck on that. What is this madness!
www.imageshack.us/f/16/dscn5191j.jpg
Epic post
youcefand1 said:
i install new motherbord in my pc but i d ont put the usb cable corectly so whene i put my galaxy s2 its stop
and whene i deconect .
in the phone it seems like the usb is conect
and whene i turn off my mobile he want boot
so i put the chage cable and he boot . but the phone is always like the usb is conected . pleeeeeeeeeeese help me. and sory for my english.....imageshack.us/f/16/dscn5191j.jpg
imageshack.us/f/16/dscn5191j.jpg
Click to expand...
Click to collapse
Oh boy...
Sent from my GT-I9100 using XDA App
I want some of the stuff youve been taking.
Even if I begin to imagine what you mean I couldnt help you. Google Translate what you want. You could try installing the drivers for your phone?
Sent from my GT-I9100 using XDA Premium App
when I install a new motherboard for my pc I reverse the USB cable into the motherboard.
when I turn off the phone( galaxy s2 ) it does not go out really, there are two alternates image, one with a battery and an empty battery with a yellow triangle and a thermometer.
And to restart I have to remove the battery and once I remove it several times!
Now I have MTP application all the time when I have unlocked a few seconds to go in the menu or I'm stuck on that. What is this madness!
WHat the heck? First time I see that dude.
Guys, take a look at that: www.imageshack.us/f/16/dscn5191j.jpg wtf is that?
Konstantinos said:
WHat the heck? First time I see that dude.
Guys, take a look at that: www.imageshack.us/f/16/dscn5191j.jpg wtf is that?
Click to expand...
Click to collapse
probably over heating or something. 1st time I ever saw that too.
OP, does the phone seem hot to you? To turn off MTP, you have to turn on USB Debugging.
Settings > Apps > Development then reconnect the USB cable
there are few people on the net seeing that warning image..
if you google "Samsung Galaxy S2 battery thermometer warning" you will see few forums regarding this problem pop up..
some people apparently reset the phone and the warning page disappeared.. Some used different battery.. but some people still had the problem even with a different battery..
by reading few forums, i think it's a random warning (if your phone is not physically overheating). may be just turn it off, take the battery out and start it again in few minutes and see how that goes...
or you can always take it back to the shop under warranty.
good luck mate
It could have something to do with the battery or the heat sensor. Either could be malfunctioning. If i were you i'd go back to the shop with the warranty.
you can get a replacement usb board part of the phone. could be a easy fix, but only if it really is that part which damaged.
the problem that i d'ont have warenty and i am in algeria we have not samsung shop
when I install a new motherboard for my pc I reverse the USB cable into the motherboard
I am reading this as you have blown /fried the USB connection by wiring the connector from the PC wrongly .That could be and or further components like battery charging blown components .
You wont fix that without a service centre as its blown electronic components by shoving voltage down the wrong path .
jje
RMXO said:
probably over heating or something. 1st time I ever saw that too.
OP, does the phone seem hot to you? To turn off MTP, you have to turn on USB Debugging.
Settings > Apps > Development then reconnect the USB cable
Click to expand...
Click to collapse
i cant he say that the usb in conected .deconect first
JJEgan said:
when I install a new motherboard for my pc I reverse the USB cable into the motherboard
I am reading this as you have blown /fried the USB connection by wiring the connector from the PC wrongly .That could be and or further components like battery charging blown components .
You wont fix that without a service centre as its blown electronic components by shoving voltage down the wrong path .
jje
Click to expand...
Click to collapse
Is it possible to repair and it is easy to repair ???????
youcefand1 said:
Is it possible to repair and it is easy to repair ???????
Click to expand...
Click to collapse
Your phone is physically damaged and you need to send it to your supplier or Samsung to get it repaired.
johncmolyneux said:
Your phone is physically damaged and you need to send it to your supplier or Samsung to get it repaired.
Click to expand...
Click to collapse
i meen if he can repaired it ????
youcefand1 said:
i meen if he can repaired it ????
Click to expand...
Click to collapse
Send it to Samsung.
johncmolyneux said:
Send it to Samsung.
Click to expand...
Click to collapse
we d'ont have here in algeria
youcefand1 said:
we d'ont have here in algeria
Click to expand...
Click to collapse
If you got the phone from a provider or carrier then you need to send it to them.
If you bought the phone yourself then you need to find someone to repair it.
thenks all

for those who have problems in the brick x10mini pro

hi to get started apologize for my English
good on the brick problem I have a small x10 solution to me has served
1 close
Sony Ericsson PC Companion 2.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2
first hurdle to
C: \ Program Files (x86) \ Sony Ericsson \ Update Service \ Update Service.exe
run
* Update Service.exe
3
choose your language
accept the license agreement
and press start
4
choose your phone
I chose the u20 is the x10 MiniPro but should work for all models of sony erricson
Select your cell phone
and next
take out the battery from the battery cell by pressing the back button and connect the USB cable
and if the program is reconose your lucky day
I hope this mini tutorial will serve
nice, it's a good ones.....
so many people keep starting new similar thread asking about how to resolve their bricked phone, they think that bricking the phone is like end of the world, although the solution is very simple.
guys, as long as the computer still can detect your bricked phone, it's solvable
Sent from my U20i using xda premium
Please help, my X10 mini isn´t recognized on my PC! I have tried with Back button, Home+Power buttons, Volume -, the Reset button on the back, unplug the battery and nothing seems to work! The red LED just blinked one time. What could i do? Obviously if the USB port can´t recognize my phone, i can´t use SEUS, PC Companion or Flash Tool, altough i already tried.
Sorry 4 my poor english
The red LED is that it is charging the phone battery from your charger and follow the guide
Sent from my U20a using xda premium
dams2011 said:
The red LED is that it is charging the phone battery from your charger and follow the guide
Sent from my U20a using xda premium
Click to expand...
Click to collapse
I know, but it just blinked one time, it´s not blinking anymore, not when i plug the charger/USB and not when i press the Power button.
It might be a broken USB port on my phone? What could i do?
choninos said:
I know, but it just blinked one time, it´s not blinking anymore, not when i plug the charger/USB and not when i press the Power button.
It might be a broken USB port on my phone? What could i do?
Click to expand...
Click to collapse
This is great thanks, but there are already sooooooo many threads explaining exactly this and other ways to fix a bricked phone. Why the need for a new one?
Why not just search?
Cheers,
Evil.
szl.kiev said:
guys, as long as the computer still can detect your bricked phone, it's solvable
Click to expand...
Click to collapse
Yep, that´s my problem, i leave my phone plug to the USB all night but it doesn´t fix the problem. Without battery the phone can´t be found by the PC right?
@evilbarcode I know, there is a lot of threads of people fixing their phones, so I asked for help on this, not on a new thread. I have been searching but i suppose this is physical damage, maybe my battery or the USB port.
Thanks for your help.
choninos said:
Yep, that´s my problem, i leave my phone plug to the USB all night but it doesn´t fix the problem. Without battery the phone can´t be found by the PC right?
@evilbarcode I know, there is a lot of threads of people fixing their phones, so I asked for help on this, not on a new thread. I have been searching but i suppose this is physical damage, maybe my battery or the USB port.
Thanks for your help.
Click to expand...
Click to collapse
So that wasnt directed at you, it was directed at the OP, should have stated that.
Cheers,
Evil.

Galaxy S2 4G won't turn on.

Hey.
I've had my S2 4G ( i9210T ) a whole day now, I rooted it ect, and then I accidentally flashed a S2 rom ( I9100 ) and now theres no download mode, no recovery, no nothing at all.
Anyone have any ideas or can help me?
You mean you can't even get into the bootloader? Wow... Try flashing a stock rom on it through your pc using Odin.
Pretty sure you bricked it mate, send it back to Samsung lol
Sent from my 80GB CyanogenMOD 9 + Siyah ICS powered beast. Booya!!
Well you could try some things like wiping SD, wiping phone and put stock roms and everything on it. After that. Yea send it back.
It's completly ****ted, no recovery, no download, no lights, no vibrations absolutely nothing, not even a backlight button. PC don't even recognize it when I plug it in.
Does it show android...!...PC? Remove battery reinsert it. Get a JIG (google samsung JIG) and then insert it when you start the phone. Then when you see download mode pull it out and connect it to your pc and using Odin you should be able to flash it.
If that phone--!--PC don't show up then you're just straight up ****ed, I think.
Nope nothing comes up on the screen, not a damn thing. I've tried the old hair dryer trick ( worked on old SGS2 ) and it didn't make it go to download mode.
There is literally not a sign of life at all, will go down get some resistors tomorrow and try make a jig, what resistors do I need?
unlucky
Oh man, thats bad :/
You will need a mini-usb-A male connector and a 300k resistor. Then solder the resistor to the connector like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just google it. There are plenty of guides on it on both youtube and random sites.
I made a mistake! YOU NEED MINI-USB TYPE A!!!!
It wouldn't let me edit within 2 minutes...
Is it dead? I'm just saying...I did that once. I thought my old phone had more battery then it did and then it froze and died. It worked fine after charging. I felt sooo stupid
TheRomMistress said:
Is it dead? I'm just saying...I did that once. I thought my old phone had more battery then it did and then it froze and died. It worked fine after charging. I felt sooo stupid
Click to expand...
Click to collapse
I left it for about an hour and not a single thing hapen.
Sent from my GT-I9300 using xda premium
Pray the NAND is so borked whomever fixes it doesn't notice it's been messed with.
TheRomMistress said:
Is it dead? I'm just saying...I did that once. I thought my old phone had more battery then it did and then it froze and died. It worked fine after charging. I felt sooo stupid
Click to expand...
Click to collapse
Did this once myself with a motorola phone left it in s drawer for months then one day I decided to just charge it up and see what happens and went right into download mode n recovery fine after charge I felt like a damn moron. Sent from my PG86100 using xda premium

Motherboard and internal memory.

Hi guys.
Just now I was trying to use my phone and suddenly it couldn't turn on anymore. I searched around in the internet and found out that it might be the problem of motherboard.
It doesn't turn on at all. So I am wondering if I change my motherboard, will the data inside be wiped too?
I am okay with the apps and stuff but I don't want to lose the pictures, contacts and my texts.
Any idea on what I can do ?
I really really really don't want to lose those 3 things mentioned.
Thank you a lot for any replies
What (if anything) did you do to resurrect your phone?
Did you remove the battery for some minutes?
Did you try turning it on with the help of a USB Jig?
Does the phone charge?
xLotto said:
Hi guys.
Just now I was trying to use my phone and suddenly it couldn't turn on anymore. I searched around in the internet and found out that it might be the problem of motherboard.
It doesn't turn on at all. So I am wondering if I change my motherboard, will the data inside be wiped too?
I am okay with the apps and stuff but I don't want to lose the pictures, contacts and my texts.
Any idea on what I can do ?
I really really really don't want to lose those 3 things mentioned.
Thank you a lot for any replies
Click to expand...
Click to collapse
As far as I know the memory is part of the MBO so if it gets replaced the memory gets replaced too, hence all data not on external SD will be lost.
fxrb said:
What (if anything) did you do to resurrect your phone?
Did you remove the battery for some minutes?
Did you try turning it on with the help of a USB Jig?
Does the phone charge?.
Click to expand...
Click to collapse
I did remove the battery for about an hour. Charged with and without battery on. No response both ways. I don't own an USB Jig so I didn't try that method. I am using official ROM, most probably 4.0.4 ICS. Any clues ?
xLotto said:
I did remove the battery for about an hour. Charged with and without battery on. No response both ways. I don't own an USB Jig so I didn't try that method. I am using official ROM, most probably 4.0.4 ICS. Any clues ?
Click to expand...
Click to collapse
What I was trying to say is: does the battery get charged, i.e. if you connect the AC adapter to your phone (which is turned off and has the battery inserted) do hear a sound and do you see the battery charging symbol? If not, how can you tell that the battery is charged at all? First of all you should make absolutely sure your battery is fully charged, for instance by putting it in an other phone.
Once you know the battery is fully charged the Jig might help. You should also try getting into download mode by using Volume Down + Home + Power button. But again: first make sure the battery is charged.
fxrb said:
What I was trying to say is: does the battery get charged, i.e. if you connect the AC adapter to your phone (which is turned off and has the battery inserted) do hear a sound and do you see the battery charging symbol? If not, how can you tell that the battery is charged at all? First of all you should make absolutely sure your battery is fully charged, for instance by putting it in an other phone.
Once you know the battery is fully charged the Jig might help. You should also try getting into download mode by using Volume Down + Home + Power button. But again: first make sure the battery is charged.
Click to expand...
Click to collapse
I used two different charger and tried to charge the phone and nothing came out on the screen. No battery charging symbol. It remains the same dark screen. I will try to find another phone or battery that can fit to test, most probably at the stores tomorrow. But I am pretty sure my battery have some batteries left. If so, anything I can do right now ? It doesn't switch on at all so I guess that's why the download mode didn't work ? Is there a big possibility of it being the motherboard ? I don't mind replacing anything but I just don't want to lose those important data. Thanks for the help
Can you get into download mode? Use the volume down + home + power button combination.
Sent from my GT-I9100 using Tapatalk 2
xLotto said:
I used two different charger and tried to charge the phone and nothing came out on the screen. No battery charging symbol. It remains the same dark screen.
Click to expand...
Click to collapse
This could be a problem with the charging port connector print ...
xLotto said:
I will try to find another phone or battery that can fit to test, most probably at the stores tomorrow.
Click to expand...
Click to collapse
Excellent idea
xLotto said:
But I am pretty sure my battery have some batteries left. If so, anything I can do right now ?
Click to expand...
Click to collapse
Without Jig? No. Probably order one from Ebay? The Jig is quite cheap so you do not loose much money if it does not work.
xLotto said:
It doesn't switch on at all so I guess that's why the download mode didn't work ?
Click to expand...
Click to collapse
Yes, correct.
xLotto said:
Is there a big possibility of it being the motherboard ? I don't mind replacing anything but I just don't want to lose those important data. Thanks for the help
Click to expand...
Click to collapse
I don't know, sorry. See my first post concerning MBO replacement.
Thanks a lot. I will see what I can do at the stores later Hope it's not the motherboard problem. If not I guess I have to lose all the data.
Ohh
Octoplus for samsung repair
Honestly, i am so sympathy for your phone and your feeling, ever i also happened this phenomenon , but since a got a tool, Octoplus and know how it works, i am not afraid the failure occurring,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And i am repair man, so i focused on the repair tools, search it in amazon, in google, in yahoo,
There still the product you need forever only you can find.

Battery icon blinking

I'm using latest XWLPX firmware and it have been working fine and now suddenly the battery icon keeps flashing, I can't see any battery stats, the battery percentage dont go down and when I reboot my phone it drops from 80% to less than 20%. When the phone is turned off a battery is shown indicating how much battery percentage is left and some seconds later it disappears and it appears again, over and over. Is the battery damaged? I've tried to unplug battery, wipe cache and wiping battery stats. Yesterday I used my phone when it was raining just to see when the bus arrived but I dont think just using it in the rain for a short time will damage it. Shall I try to re-flash in Odin?
for sure you need the re-flash, if you are not on custom ROM, why not do emergency recovery trough Kies?
I cant tell you if your battery is damaged, did you install some crazy battery tools/indicators/mods?
Try reflashing and see what happens mate.
I recommend you to reflash rom and then try better battery stats...
Cuz ur observation says its not Hardware problem
Peace
Hit Thanks & It will Disappear
Sent from S II Running Official ICS 4.0.4 with Siyah 4.1 [/size]
ive got the same problem
ive reflashed and problem stays
i was on neatrom themed when it started and now im on neatrom not themed and its still doing it.
not tried a full wipe.
its been going on about 3 weeks and its not affected the phone at all
Have you tried changing battery?
Edit: if yes then it seems to hardware problem.
.
Peace
Hit Thanks & It will Disappear
Sent from S II Running Official ICS 4.0.4 with Siyah 4.1 [/size]
ive changed the battery and still the same
sort of got used to it now ha ha
Really strange, the flashing battery symbol has to mean something. I also noticed if I plugin USB charger and remove it, then try to disable "USB debugging" in settings I'll get a "USB is connected. Remove the cable." error message. I just restarted my phone too see if I could get rid of it but I still can't disable it and now my battery dropped to 12% it was almost fully charged?! And the icon keeps flashing. When I turn it off again by pressing the power button the battery screen appears and disappears over and over again like I said it first post. It's the screen you normally get when you connect the AC adapter to your phone indicating how much it's charged. It shouldn't appear if you dont have USB or AC adapter connected. It's impossible to turn on the phone, when I hold in the power button for some time the battery screen disappears. Then I try to power it on but instead the battery screen appears again without booting my phone. Only way to get in is to start recovery mode and select reboot phone. Gonna try to re-flash with Odin but seems to be more a hardware issue.
update: re-flashed and the problem persists...
I just flashed CM9 and almost all the time even when I'm not charging I get a battery with a charging icon on it. Here is a picture of the strange battery drain:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Aircondition said:
I just flashed CM9 and almost all the time even when I'm not charging I get a battery with a charging icon on it. Here is a picture of the strange battery drain:
Click to expand...
Click to collapse
use tooth brush to clean your micro USB/ charging port
Swyped from my Samsung Galaxy SII
Aircondition said:
I'm using latest XWLPX firmware and it have been working fine and now suddenly the battery icon keeps flashing, I can't see any battery stats, the battery percentage dont go down and when I reboot my phone it drops from 80% to less than 20%. When the phone is turned off a battery is shown indicating how much battery percentage is left and some seconds later it disappears and it appears again, over and over. Is the battery damaged? I've tried to unplug battery, wipe cache and wiping battery stats. Yesterday I used my phone when it was raining just to see when the bus arrived but I dont think just using it in the rain for a short time will damage it. Shall I try to re-flash in Odin?
Click to expand...
Click to collapse
Hy I seems to be a known issue to me...I faced this issue some days ago...
U should clean ur phone's charging port.
I hope it will resolve the issue...
Sent from my GT-I9100 using xda app-developers app
MomsDear said:
Hy I seems to be a known issue to me...I faced this issue some days ago...
U should clean ur phone's charging port.
I hope it will resolve the issue...
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I have exactly the same problem, and I also disassembled the back and searched for the issue. Cleaned the connector with some white gas and compressed air, but it didn't helped at all.
Did anybody fix this issue?
EDIT: found bigger thread: http://forum.xda-developers.com/showthread.php?t=1216163
Try not using your phone for 3,4 days.... if was a water damage, it would be resolved automatically...

Categories

Resources