Could someone please make a working pudding remover - Motorola Photon 4G

The nopudding4u download that someone posted doesn't work and gives Fail to boot 2 errors to everyone who tries it out.
Could one of you please make a pudding remover that works? I would like to relock my bootloader, so that way my 4G will work. I don't want to reflash an entire sbf as I want to keep my data.

I just relocked my bootloader with the pudding remover... it says that it's failed... but it works.. make sure you flashed the stock recovery before you relock... but I kinda did it backwards... but it works...

I would get Fail to boot 2.
I had to reflash pudding to get my phone to boot.
I really want to remove pudding and the steps provided don't do much.
Sent from my MB855 using Tapatalk

antgly said:
I would get Fail to boot 2.
I had to reflash pudding to get my phone to boot.
I really want to remove pudding and the steps provided don't do much.
Sent from my MB855 using Tapatalk
Click to expand...
Click to collapse
me too I can't relock with pudding remover even with flashing back the stock recovery i'd still get the failed to boot 2 error.

Cwm backup, sbf, bootstrap, cwm restore=profit
Sent from my MB855 using XDA App

+10 char
jokersax11 said:
Cwm backup, sbf, bootstrap, cwm restore=profit
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
Sent from my MB855 using XDA App

I'm wondering as to what exactly is the problem with nopudding4u that makes it fail to work properly.

I believe that Failed to boot 2 error means that your battery is below 50% charge. The RSD softeware on the phone won't let to flash if you're under 50% battery.
I got that error and then put my Photon on the AC charger. Tryed again 20 minutes later and the boot worked.

what does Failed to boot 4 mean?

Work it does not, rsd you must do.
skyungjae said:
what does Failed to boot 4 mean?
Click to expand...
Click to collapse
Sent from my MB855 using XDA App

antgly said:
I would get Fail to boot 2.
I had to reflash pudding to get my phone to boot.
I really want to remove pudding and the steps provided don't do much.
Sent from my MB855 using Tapatalk
Click to expand...
Click to collapse
Make sure you guys have the right nopudding.sbf I had the failed to boot 2 a while ago when I flashed an electrify.sbf by mistake and It nearly terminally bricked my phone. I have locked and unlocked multiple times using the correct nopudding I believe there is also a stock sbf that will relock, but I'm not sure where to find it, I would assume try googling it.

FanBoy_Hunter said:
Make sure you guys have the right nopudding.sbf I had the failed to boot 2 a while ago when I flashed an electrify.sbf by mistake and It nearly terminally bricked my phone. I have locked and unlocked multiple times using the correct nopudding I believe there is also a stock sbf that will relock, but I'm not sure where to find it, I would assume try googling it.
Click to expand...
Click to collapse
Go to the dev section or check my sig
To Other MoPho Users:
I'm not quite sure what's going on as I root-unlock-relock a couple times a day on a dev day with no issues. There seems to be a flood of OMGWTFBBQ posts regarding this process. What threads are you guys reading for instructions?

Fanboy, PM me with how you managed to get rid of the electrify sbf. I am stuck in the same predicament with .235.
As for Lokifish, I thank you many times over for putting the files together.

medic233 said:
Fanboy, PM me with how you managed to get rid of the electrify sbf. I am stuck in the same predicament with .235.
As for Lokifish, I thank you many times over for putting the files together.
Click to expand...
Click to collapse
Working right now and I have to do some research to remember how I did it (been a while) , but most definitely. I'll get back to you on it tonight. where I'm at it's almost 1 so it'll be about 9 When I can pm u

I unlocked a while back to check out ICS. I then flashed back to stock using the 198_7 sbf and did a factory wipe. My phone no longer said unlocked during boot and everything was good. However, a couple days back I decided that I wanted to unlock again to try some new cool things. During the unlock process, I flashed the pudding sbf and when it reboot it said unlocked. I didnt have to go through the cmd steps and enter my unique ID. So that has me wondering if I was ever really relocked. I definitely had the stock recovery. So, even if my phone does not say unlocked during boot, should I flash the nopudding4u sbf? I ask because I will be traveling to a wimax area soon and want to make sure that I can use it.
Thanks guys.

my2cents said:
I unlocked a while back to check out ICS. I then flashed back to stock using the 198_7 sbf and did a factory wipe. My phone no longer said unlocked during boot and everything was good. However, a couple days back I decided that I wanted to unlock again to try some new cool things. During the unlock process, I flashed the pudding sbf and when it reboot it said unlocked. I didnt have to go through the cmd steps and enter my unique ID. So that has me wondering if I was ever really relocked. I definitely had the stock recovery. So, even if my phone does not say unlocked during boot, should I flash the nopudding4u sbf? I ask because I will be traveling to a wimax area soon and want to make sure that I can use it.
Thanks guys.
Click to expand...
Click to collapse
u only have to put in the unique I'd once. Its like unlocking the door that allows u to open and close it. I believe with 198_7 u don't need to use no pudding, but I have been on cm9 a long time and my memories a little foggy. U can however flash it just to be safe.
Sent from my MB855 using xda premium

Related

Trying to unlock SBF 198-7

First let me apologize if this has been answered. I have tried to look in the forums for an answer and can't find it.
What I am trying to do:
Unlock SBF 198-7
Install jokers ROM
I am stuck trying to unlock SBF 198-7. I know it is possible b/c the rom requires it. If someone can please explain how to do that would be great. If there is a thread about this already that I have missed please share the link and I will request this thread be locked so that it doesn't waste anyone elses time.
I am familiar with RSD and Fastboot and have tried the steps if you have the stock 154 SBF.
Thanks again
Phone info:
Sys ver.: 45.3.7.MB855
Build ver.: 4.5.1a-1_sun-198.7
**Forgot to mention** When I try and do moto-fastboot oem unlock ######### I get - "... INFOOEM unlock is not implemented" If that helps any
vmbgap said:
First let me apologize if this has been answered. I have tried to look in the forums for an answer and can't find it.
What I am trying to do:
Unlock SBF 198-7
Install jokers ROM
I am stuck trying to unlock SBF 198-7. I know it is possible b/c the rom requires it. If someone can please explain how to do that would be great. If there is a thread about this already that I have missed please share the link and I will request this thread be locked so that it doesn't waste anyone elses time.
I am familiar with RSD and Fastboot and have tried the steps if you have the stock 154 SBF.
Thanks again
Phone info:
Sys ver.: 45.3.7.MB855
Build ver.: 4.5.1a-1_sun-198.7
**Forgot to mention** When I try and do moto-fastboot oem unlock ######### I get - "... INFOOEM unlock is not implemented" If that helps any
Click to expand...
Click to collapse
I had the same error. I sbf back to 154_6, then unlocked using pudding, then sbf yays stock 198_7, then used pudding and I was good to go. I know its a hassle but it worked for me
Sent from my MB855 using XDA App
If you've already unlocked your bootloader before.. Just use the unlock bootloader by itself.. You should be good from there ...
The unlock itself can be used through rsd .. ..no need to type anything
Sent from my MB855 using xda premium
dcowboys2184 said:
If you've already unlocked your bootloader before.. Just use the unlock bootloader by itself.. You should be good from there ...
The unlock itself can be used through rsd .. ..no need to type anything
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
This is kind of where I am. I was unlocked before I started. Looks like I am going to have to try phyba's suggestion if no one else has any ideas.
I don't mind at all doing this just seems like there should be an easier way
http://diamantephoto.com/photon_pudding.rar flash this through rsd u should be good!! make sure u extract and flash the sbf... only takes a minute
vmbgap said:
This is kind of where I am. I was unlocked before I started. Looks like I am going to have to try phyba's suggestion if no one else has any ideas.
I don't mind at all doing this just seems like there should be an easier way
Click to expand...
Click to collapse
Thread moved to proper forum.
Once you've unlocked once u never have to use fastboot except to replace recovery. If u relock ur bootloader u never have to do the OEM unlock script again. Its forever there in a way.
sent from Cybertron, mopho!
Yep. Once you've unlocked, you don't have to do the fastboot. As everyone has mentioned. I can also confirm this. I've done it probably fifteen times.
dcowboys2184 said:
http://diamantephoto.com/photon_pudding.rar flash this through rsd u should be good!! make sure u extract and flash the sbf... only takes a minute
Click to expand...
Click to collapse
This is what fixed it. My friend, you awesome!!!
dcowboys2184 said:
http://diamantephoto.com/photon_pudding.rar flash this through rsd u should be good!! make sure u extract and flash the sbf... only takes a minute
Click to expand...
Click to collapse
Can we flash this with SBF 198-7 or ?????
You can flash it via RSD after you flash the 198_7 update, yes.
d2xtr said:
Can we flash this with SBF 198-7 or ?????
Click to expand...
Click to collapse
Yes, I did and it fixed it within a couple seconds.
out of curiousity i've gotten the 198 7 installed on my phone and lose the root like it says but i also lose my unlock and when i do it thru rsd with derplunk it takes me back to 154 any suggestions.....

Flashed pudding 2.3.5 for the Photon, now what?

I don't read well, apparently, and flashed the Electrify 2.3.5 file in hopes of unlocking my bootloader.
Has anyone else (I have read that a handfull of people have been stupid like me) had any luck unbricking the device?
I have access to RSD protocol and Fastboot.
Thanks in advance.
EDIT: The only thing my phone says now is:
SUF: 108:1:2
Failed to boot 3
----------------------------------------------------------------------
EDIT #2: Downloaded someones CWM flashable kernel and flashed to boot.img via moto-fastboot. Not I have an "Failed to boot 2", which people have recovered from. I am currently flashing (198_7)-1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_7-CM-release-keys-signed-Sprint-US.sbf and it's 55% completed, which is higher than it got before........
EDIT #3: It failed.... waiting for re-enumeration...
Have you tried this?
http://www.youtube.com/watch?v=J94VcWk-CJc
I fixed it by flashing the electrify 2.3.5 rom thru rsd.
Now all I have to do is get it back to Sprint.
Sent from my A500 using xda premium
npaulseth said:
I fixed it by flashing the electrify 2.3.5 rom thru rsd.
Now all I have to do is get it back to Sprint.
Sent from my A500 using xda premium
Click to expand...
Click to collapse
Not gonna happen until the new boot-loader is cracked... Sorry
Flashing ROMS Via Bootstrap doesnt work.
Its not that big of a deal. Everything works except 4G and MMS.
I can wait.
Sent from my Motorola Electrify using xda premium
npaulseth said:
Its not that big of a deal. Everything works except 4G and MMS.
I can wait.
Sent from my Motorola Electrify using xda premium
Click to expand...
Click to collapse
Try go sms pro. Put mms settings in advanced settings. Should make mms work.
now just a clarification but is it possible to, without Motorola files, to unlock the boot loader our selves? Is there any coding work to unlock this boot loader on our own?
Sent from my Full Android on Wingray using xda premium
You have to flash something to gain the abilty to unlock the bootloader thru fastboot.
npaulseth said:
I don't read well, apparently, and flashed the Electrify 2.3.5 file in hopes of unlocking my bootloader.
Has anyone else (I have read that a handfull of people have been stupid like me) had any luck unbricking the device?
I have access to RSD protocol and Fastboot.
Thanks in advance.
EDIT: The only thing my phone says now is:
SUF: 108:1:2
Failed to boot 3
----------------------------------------------------------------------
EDIT #2: Downloaded someones CWM flashable kernel and flashed to boot.img via moto-fastboot. Not I have an "Failed to boot 2", which people have recovered from. I am currently flashing (198_7)-1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_7-CM-release-keys-signed-Sprint-US.sbf and it's 55% completed, which is higher than it got before........
EDIT #3: It failed.... waiting for re-enumeration...
Click to expand...
Click to collapse
I haven't found the file yet, but apparently right now the only way to fix this is to flash the 2.3.5 Electrify rom.
http://forum.xda-developers.com/showthread.php?t=1394982&highlight=stuck+in+fastboot
http://forum.xda-developers.com/showthread.php?p=20713504
Edit #2: confirmed working. I made a small tutorial for those on this same situation here: http://forum.xda-developers.com/showpost.php?p=21015556&postcount=6
Have a good life!
firtermish said:
I haven't found the file yet, but apparently right now the only way to fix this is to flash the 2.3.5 Electrify rom.
http://forum.xda-developers.com/showthread.php?t=1394982&highlight=stuck+in+fastboot
http://forum.xda-developers.com/showthread.php?p=20713504
Edit #2: confirmed working. I made a small tutorial for those on this same situation here: http://forum.xda-developers.com/showpost.php?p=21015556&postcount=6
Have a good life!
Click to expand...
Click to collapse
Just a quick question: Where you able to flash back to:
1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_7-CM-release-keys-signed-Sprint-US.sbf
or are you runningL 2.3.5?
Thanks,
RJR
rrusek said:
Just a quick question: Where you able to flash back to:
1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_7-CM-release-keys-signed-Sprint-US.sbf
or are you runningL 2.3.5?
Thanks,
RJR
Click to expand...
Click to collapse
I haven't personally tried it, but as far as I know you can't. You are stuck on 2.3.5 until someone releases a new bootloader unlocker.
firtermish said:
I haven't personally tried it, but as far as I know you can't. You are stuck on 2.3.5 until someone releases a new bootloader unlocker.
Click to expand...
Click to collapse
That's what I figured.. I quess it is better to be stuck unlocked than to be stuck locked!
---------- Post added at 07:25 PM ---------- Previous post was at 07:23 PM ----------
Has anyone been able to get the Sprint data profile pulled down on this so I can use on Sprint?
I had a similar problem this weekend I flashed electrify 2.3.5 on my photon lost root and recovery and was able to get both back. First I flashed the sunfire 2.3.4 thru rsd then one click root and then bootstrap app to flash cwn and am able to flash roms again.
Sent from my MB855 using Tapatalk
js11222 said:
I had a similar problem this weekend I flashed electrify 2.3.5 on my photon lost root and recovery and was able to get both back. First I flashed the sunfire 2.3.4 thru rsd then one click root and then bootstrap app to flash cwn and am able to flash roms again.
Sent from my MB855 using Tapatalk
Click to expand...
Click to collapse
Are you currently locked or unlocked? If I lock my device I will get the Failed to Boot 1 error. If I unlock then everything works.
When I flashed the 2.3.5 rom It locked my phone u have to re unlock it
Sent from my MB855 using Tapatalk
rrusek said:
Are you currently locked or unlocked? If I lock my device I will get the Failed to Boot 1 error. If I unlock then everything works.
Click to expand...
Click to collapse
After flashing the 2.3.5 rom it locked my phone I had to re unlock it I used the unlock sbf thru rsd I am currently unlocked back on jokers stock rom
Sent from my MB855 using Tapatalk
js11222 said:
After flashing the 2.3.5 rom it locked my phone I had to re unlock it I used the unlock sbf thru rsd I am currently unlocked back on jokers stock rom
Sent from my MB855 using Tapatalk
Click to expand...
Click to collapse
But if you wanted to re-lock your phone to get 4g could you do it or would you also get the Failed to Boot 1 error?
Point being is that I think it relocks your phone and does not allow for a downgrade.
rrusek said:
But if you wanted to re-lock your phone to get 4g could you do it or would you also get the Failed to Boot 1 error?
Point being is that I think it relocks your phone and does not allow for a downgrade.
Click to expand...
Click to collapse
Yes it did lock my phone then I unlocked it again and am on stock 2.3.4 so I did downgrade
Sent from my MB855 using Tapatalk
js11222 said:
Yes it did lock my phone then I unlocked it again and am on stock 2.3.4 so I did downgrade
Sent from my MB855 using Tapatalk
Click to expand...
Click to collapse
If you would not mind can you please outline what you did?
This is what I did:
1. Installed regular pudding
2. Installed cwm recovery
3. Installed 2.3.5 for Electrify/Photon via cwm
Then did:
1. Installed stock recovery
2. Installed nopudding4g
After that I started getting the Failed to Boot 1
No matter which locked 2.3.4 I try to flash via RSD it fails on first flash pass when it tries to put the phone into BP bypass.
First to get my phone back to normal in rsd mode I flashed the sunfire sbf then to unlock my phone I used pudding unlock sbf then to get recovery I had to do the one click root then got the bootstrap app to flash cwm zip then I installed jokers stock rom
Sent from my MB855 using Tapatalk

SIM issue on Clean Rom 4.2

Hope this is the correct place to ask, but quick question. So (short form) I relocked bootloader, reflashed the RUU, unlocked boot loader, installed ROM and it works great UNTILL I insert my SIM card, then it just keeps restarting. Why does this happen? What do I need to do, start all over and reflash everything? Please help!
Did you flash ruu twice.....it doesn't flash everything the first time through
Sent from my ADR6425LVW using XDA
This is gonna sound retarded, but I think so. The first time it installed the RUU, it was a blue status bar on the right, the 2nd time it was a brown status bar. But, I had already installed the ROM prior to seeing the brown bar...Does that make any since? I used to be decent at this, but it's been a while...
relock and reflash the ruu twice... then flash recovery and then flash a rom
Worst case flash the ruu again...watch it do each step successfully...that's what I would do. When I did the first flash using scoslers instructions I needed to do a battery pull since it was stuck at white htc screen...
Sent from my ADR6425LVW using XDA
ericsignals said:
Worst case flash the ruu again...watch it do each step successfully...that's what I would do. When I did the first flash using scoslers instructions I needed to do a battery pull since it was stuck at white htc screen...
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
Ok, we'll try and see what happens. I was hoping that it was something small. lol
It could be something else...but when I am not sure on something I start from scratch and try again lol
Sent from my ADR6425LVW using XDA
ok, so that did the trick for the SIM, but now I lost root and cant get it back...ugh! I've tried thru recovery and using Rezound_All-In-One_Kit_v2.0, but it dont work either. phone works for now though...so better than nothing. If yall got any ideas on how to get root back I would be thankful...yall know alot more about this than I do..haha
bskarpa said:
ok, so that did the trick for the SIM, but now I lost root and cant get it back...ugh! I've tried thru recovery and using Rezound_All-In-One_Kit_v2.0, but it dont work either. phone works for now though...so better than nothing. If yall got any ideas on how to get root back I would be thankful...yall know alot more about this than I do..haha
Click to expand...
Click to collapse
You need to HTC dev unlock again then flah amon ra
Sent from my Dinc... I mean Rezound
yojoe600 said:
You need to HTC dev unlock again then flah amon ra
Sent from my Dinc... I mean Rezound
Click to expand...
Click to collapse
+1 Its like starting all over again.
One more post for my ten

Question about relocking bootloader and security warning.

So I am sending this amaze back to T-Mobile for a warrenty exchange. T-Mobile already sent me the replacement. Not going through HTC or Asuron.
I unlocked bootloader, flashed a recovery, then flashed a new rom. I made a nandroid of my stock rom I had on there before I did the unlock stuff.
So I wiped the custom rom , and restored the stock rom
So now I relocked bootloader and it says relocked and security warning. What exactly does that mean? Is it normal?
T-Mobile doesnt even care about that stuff right? I should only stress it if I was sending it into HTC. I hope lol.
The only problem I am having is when I try to master reset the phone, it takes me to the screen that says bootloader, reboot, reload bootloader, power down and I dont know why. The phone master reset fine the first time I attemped, but I just wanted to do it again. I hold the volume key down and power and the normal screen comes out with Fastvoot recovert factory reset clear storage simlock image crc , but when I click factory reset, it boots for 5 seconds and takes me back to the screen that has bootloader, reboot, reload bootloader etc etc. When I power on and off the phone, it turns on and everything is fine. Normal stock ICS.
Why cant I factory reset it again?
cause you relocked it and yes send it LOCKED
Flash a stock RUU via hboot, it's gonna wipe everything and take it back to complete stock.
Dark Nightmare said:
Flash a stock RUU via hboot, it's gonna wipe everything and take it back to complete stock.
Click to expand...
Click to collapse
It will still say relocked... So not COMPLETELY stock
If htc or tmo get a device that is "relocked" that has software issues, the warranty MAY be in jeopardy... If needed
Sent from my HTC_Amaze_4G using xda premium
But if you s-off, restore to stock, lock bootloader via fastboot and s-on via fastboot, it's gonna all be authentic.
Sent from my HTC Ruby using XDA
glacierguy said:
It will still say relocked... So not COMPLETELY stock
If htc or tmo get a device that is "relocked" that has software issues, the warranty MAY be in jeopardy... If needed
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
Not really worried about it. Just wanna send it in normal, even if it says relocked. If they charge, they charge. I doubt it though. How much they charge anyway, tmobile that is. Might be able to just sell it and make some money and still pay back tmobile, seeing its on ebay for 350ish lol. Either way they already sent me a new phone.
Problem is, I did a clean wipe. Just the first one, not the other wipes. I flashed my Nandroid I made before I flashed a custom rom. Everything worked so I relocked it, but when I try to master reset, it automatically takes me to the screen that says bootloader, reboot, reload bootloader, power down and I dont know why
Am I doing something wrong?
For kicks I even downloaded the ota rom and flashed that one after i wiped the other, and when I rebooted that one , it just would flash the HTC sign. So I scratched that idea and redid what I first did.
Same happened to me. I was locking my buddys bootloader on his amaze before I flashed ics on it for him and it deleted his current rom and all of his pics... Everything ...
Learned the hard way. Then I flashed the ics leak in bootloader and it worked fine.
Are u soff? Cuz if u are... Make sure u have jbear or eng hboot flashed
Sent from my HTC_Amaze_4G using xda premium
glacierguy said:
Same happened to me. I was locking my buddys bootloader on his amaze before I flashed ics on it for him and it deleted his current rom and all of his pics... Everything ...
Learned the hard way. Then I flashed the ics leak in bootloader and it worked fine.
Are u soff? Cuz if u are... Make sure u have jbear or eng hboot flashed
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
Also not to mention, when I flashed the ICS zip I found on here , when I went into bootloader, all these weird things poped up about not having .imgs
Nah I am S ON.
I just wanna be able to relock the bootloader and it be able to master reset lol. Not worried about it saying relocked. Like I said, everything was working fine, until I tried master reseting and it doesnt allow it. I mean even from the volume down and power method, when I press master reset, it goes right back to that screen that says bootloader, reboot, reload bootloader, power down, without even reseting or rebooting.
Should I try this method even though I am using the ext recovery? ( when unlocked of course)
http://forum.xda-developers.com/showpost.php?p=27058110&postcount=44
ITALIANNYC said:
Also not to mention, when I flashed the ICS zip I found on here , when I went into bootloader, all these weird things poped up about not having .imgs
Nah I am S ON.
I just wanna be able to relock the bootloader and it be able to master reset lol. Not worried about it saying relocked. Like I said, everything was working fine, until I tried master reseting and it doesnt allow it. I mean even from the volume down and power method, when I press master reset, it goes right back to that screen that says bootloader, reboot, reload bootloader, power down, without even reseting or rebooting.
Click to expand...
Click to collapse
Usb debugging is hopefully turned on.
Connect phone to pc and boot into bootloader and go into fastboot.
Open command prompt on pc
Go to the directory where u have the fastboot program (ie "C:\Android\platform-tools" ) and your oem lock token
Type "fastboot OEM lock"
That should relock it.
Then take the PH85IMG and put on root of sd
Boot into bootloader and flash away. U will be good
Sent from my HTC_Amaze_4G using xda premium
glacierguy said:
Usb debugging is hopefully turned on.
Connect phone to pc and boot into bootloader and go into fastboot.
Open command prompt on pc
Go to the directory where u have the fastboot program (ie "C:\Android\platform-tools") and your oem lock token
Type "fastboot OEM lock"
That should relock it.
Then take the PH85IMG and put on root of sd
Boot into bootloader and flash away. U will be good
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
Oh yeah? I didnt know I could relock it before flashing it. Where is the ph85img image?
ITALIANNYC said:
Oh yeah? I didnt know I could relock it before flashing it. Where is the ph85img image?
Click to expand...
Click to collapse
Not only can you... You MUST relock bootloadee before flashing ics. U can find the 214.531.3 leak in Footballs thread in dev section... Careful not to get 531.1 leak... That's old
Also... Its a zip package.. not an img file... Don't confuse yourself
Sent from my HTC_Amaze_4G using xda premium
glacierguy said:
Not only can you... You MUST relock bootloadee before flashing ics. U can find the 214.531.3 leak in Footballs thread in dev section... Careful not to get 531.1 leak... That's old
Also... Its a zip package.. not an img file... Don't confuse yourself
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
Wow I did not know that. I friggin flashed ICS before I relocked lol. I dont get it though. If I relock it first, wont it not have an OS on it after i wipe when it reboots itself. Do I even need to wipe period. Do I even need to use ext lol
I downloaded the tmobile flashable zip from here
http://forum.xda-developers.com/showpost.php?p=27058110&postcount=44
Meh anyway the one you told me to download is downloading as we speak. 2 hours left wow
and when I hit the HBOOT screen the first thing it does is say some stuff with no image no image no image no image. All ph85 stuff. Wont even allow me to flash anything if I tried. Im thinking maybe its because I havent relocked the boot loader yet? Who knows. Well see what happens when this is finished downloading
To be honest, Tmo doesn't care what you send back to them, you can just brick it if you're insecure, a bunch of people I know sent it droids with CWM and custom roms, they restore it back to stock and change what they have to when you send it in.
After you install that flashable zip, just restore stock recovery via hasoon's tool and delete the superuser.apk from system/app.
ITALIANNYC said:
Wow I did not know that. I friggin flashed ICS before I relocked lol. I dont get it though. If I relock it first, wont it not have an OS on it after i wipe when it reboots itself. Do I even need to wipe period. Do I even need to use ext lol
I downloaded the tmobile flashable zip from here
http://forum.xda-developers.com/showpost.php?p=27058110&postcount=44
Meh anyway the one you told me to download is downloading as we speak. 2 hours left wow
and when I hit the HBOOT screen the first thing it does is say some stuff with no image no image no image no image. All ph85 stuff. Wont even allow me to flash anything if I tried. Im thinking maybe its because I havent relocked the boot loader yet? Who knows. Well see what happens when this is finished downloading
Click to expand...
Click to collapse
That's because its looking for your ph85img.zip file
Once u download and rename the file, and put it on ur sd card, AND relock your bootloader, it will unpack the zip and update
Sent from my HTC_Amaze_4G using xda premium
ITALIANNYC said:
So I am sending this amaze back to T-Mobile for a warrenty exchange. T-Mobile already sent me the replacement. Not going through HTC or Asuron.
I unlocked bootloader, flashed a recovery, then flashed a new rom. I made a nandroid of my stock rom I had on there before I did the unlock stuff.
So I wiped the custom rom , and restored the stock rom
So now I relocked bootloader and it says relocked and security warning. What exactly does that mean? Is it normal?
T-Mobile doesnt even care about that stuff right? I should only stress it if I was sending it into HTC. I hope lol.
The only problem I am having is when I try to master reset the phone, it takes me to the screen that says bootloader, reboot, reload bootloader, power down and I dont know why. The phone master reset fine the first time I attemped, but I just wanted to do it again. I hold the volume key down and power and the normal screen comes out with Fastvoot recovert factory reset clear storage simlock image crc , but when I click factory reset, it boots for 5 seconds and takes me back to the screen that has bootloader, reboot, reload bootloader etc etc. When I power on and off the phone, it turns on and everything is fine. Normal stock ICS.
Why cant I factory reset it again?
Click to expand...
Click to collapse
Just wondering what was the end result of your warranty adventure? Did tmobile end up charging you???
GeOpHmAn said:
Just wondering what was the end result of your warranty adventure? Did tmobile end up charging you???
Click to expand...
Click to collapse
nope

cannot flash from fastboot

after this thread http://forum.xda-developers.com/showthread.php?t=2105017 i used one of the sbf in this sites http://www.das8nt.com/sbffiles.html
and flash it with RSD now i am trying agin to use fastboot and flash once more cwn and i get this message 'error cannot load recovery.img'
and when i tryd to erase and then flash and i got the same thing.
moreover when i start the phone somehow after i flash the sbf the tuch screen works funny (its not dead pixel) its like the touch screen moved one half inch lower
After flashing sbf, in order to flash a custom recovery, you first need to flash a pudding sbf file to unlock the bootloader. After unlocking the bootloader, running the command "fastboot oem unlock" and then repeating the command with your device's ID, you can flash CWM to your recovery.
Sent from my MB860 using xda app-developers app
palmbeach05 said:
After flashing sbf, in order to flash a custom recovery, you first need to flash a pudding sbf file to unlock the bootloader. After unlocking the bootloader, running the command "fastboot oem unlock" and then repeating the command with your device's ID, you can flash CWM to your recovery.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
did it still dont work
igalc87 said:
did it still dont work
Click to expand...
Click to collapse
Seeing as your device is a non-ATT device, did you flash a pudding sbf or the IHOP sbf?
Sent from my MB860 using xda app-developers app
palmbeach05 said:
Seeing as your device is a non-ATT device, did you flash a pudding sbf or the IHOP sbf?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
i flashed to my original sbf Partner (Orange) Israel 2.3.4 / 45.33.0
Ok. After you flash that, you have to flash another sbf file over that one. http://forum.xda-developers.com/showthread.php?t=1136261 will get you to the instructions on what to do. Since Orange is what is considered international, you need the IHOP sbf on the page.
Sent from my MB860 using xda app-developers app
palmbeach05 said:
Ok. After you flash that, you have to flash another sbf file over that one. http://forum.xda-developers.com/showthread.php?t=1136261 will get you to the instructions on what to do. Since Orange is what is considered international, you need the IHOP sbf on the page.
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
i got a message its already unlock
and it still dont let me flash with fastboot
so do you any answer?
After seeking advice from a dev, this is the response i was given:
Could also be the recovery is in fact in that directory but is not named recovery.img. Or, if fastboot actually managed to load the file but still reports that error, it could be that his bootloader is either not unlocked or is having issues (the fastboot protocol is implemented in the bootloader AFAIK).
Sent from my MB860 using xda app-developers app
palmbeach05 said:
After seeking advice from a dev, this is the response i was given:
Could also be the recovery is in fact in that directory but is not named recovery.img. Or, if fastboot actually managed to load the file but still reports that error, it could be that his bootloader is either not unlocked or is having issues (the fastboot protocol is implemented in the bootloader AFAIK).
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
i looked agin my i got in the left up corner message unlock(i did all the steps after flashing the sbf)
i redownload recovery and put it in the same dirctory
and still i got errors when i try to flash recovery.img (or system.img boot.img)
so maybe my bootloader fuked how do i fix it?
and tell me if i will flash other sbf file iy will make it worse?
I'm not sure what the heck is going on with your phone or how to fix it, but I'm going to advise you to stay far far away from SBFs from now on.
ravilov said:
I'm not sure what the heck is going on with your phone or how to fix it, but I'm going to advise you to stay far far away from SBFs from now on.
Click to expand...
Click to collapse
ok will do but i will be glad to find an answer
igalc87 said:
i looked agin my i got in the left up corner message unlock(i did all the steps after flashing the sbf)
i redownload recovery and put it in the same dirctory
and still i got errors when i try to flash recovery.img (or system.img boot.img)
so maybe my bootloader fuked how do i fix it?
and tell me if i will flash other sbf file iy will make it worse?
Click to expand...
Click to collapse
I'm going to recommend you ask one of the devs about how to fix it. You can flash another sbf file, but make sure it is the same version as what you have. So if you flashed a 2.3.6 sbf, you need to flash a sbf that is 2.3.6 or risk bricking your phone.
Sent from my MB860 using xda app-developers app
---------- Post added at 09:47 AM ---------- Previous post was at 09:34 AM ----------
One other thing. I'm about to head off to basic training and will be offline for about 10 wks starting next wk. Any one of the atrix dev's should be able to help you further with your phone. I'll do what i can until i leave.
Sent from my MB860 using xda app-developers app
---------- Post added at 09:50 AM ---------- Previous post was at 09:47 AM ----------
ravilov said:
I'm not sure what the heck is going on with your phone or how to fix it, but I'm going to advise you to stay far far away from SBFs from now on.
Click to expand...
Click to collapse
I didn't see this post when i first logged in. Seeing as this comes from one of the atrix devs, i'm going to stand behind this bit of advice, but i still will stand behind what i said before, ask the devs for help.
Sent from my MB860 using xda app-developers app

Categories

Resources