I am wondering if an one has tried both cases? I checked different sites and most have different measurements for the commuter. Currently I own the tough case but would like to try the commuter if it's not any larger. I have a Nite Ize holster and the Case Mate fits perfect.
Thanks
Jadefalkon said:
I am wondering if an one has tried both cases? I checked different sites and most have different measurements for the commuter. Currently I own the tough case but would like to try the commuter if it's not any larger. I have a Nite Ize holster and the Case Mate fits perfect.
Thanks
Click to expand...
Click to collapse
I have the commuter series outerbox for the i9100 and it fits my i777 perfectly.
Ordered mine yesterday on amazon for dirt cheap.... Can't wait to get it!
Is the noise cancelling mic next to the headphone jack covered with the i9100 commuter case?
Sent from my SAMSUNG-SGH-I777 using XDA Premium App
I have the commuter series case. It fits excellent. It does cover the noise mic, however I did not modify the case yet. But I have not noticed any issues to date. I use my phone daily and a lot.
Duffman14 said:
Is the noise cancelling mic next to the headphone jack covered with the i9100 commuter case?
Sent from my SAMSUNG-SGH-I777 using XDA Premium App
Click to expand...
Click to collapse
There is a fairly large hole right next to the headphone jack cover. It may not be a 100% aligned but its a decent size hole which should serve the purpose.
Thanks for the replies but I'm trying to figure out if the commuter is similar in size to the Tough Case. It will be in a holster while I work and the Tough case fits perfectly. A customer posted a video on amazon showing that the commuter does have the holes for both mics. I love my tough case but like how the commuter covers all the ports.
I have the case mate pop and its just a tad smaller than my wifes Iphone 4 Otterbox Defender. Otterbox puts it at 16.77 mm thick. From the pictures it looks like the tough case is also a bit thinner than the pop because its form fitting. The cate mate pop is not form fitting, the back is completely flat. The Otterbox commuter is 14.80 mm thick so i'm guessing my case mate pop will be thicker.
i'm looking forward to the commuter because it protects the front a bit. So when it falls it will luckily strike that first and the raised sides. Its a given that otterboxs are lint magnet, i'm surprised because my caste mate is not. The shiny back does however drive me nuts, ITS UGLY!
Nevermind Found pictures on Amazon
I am hoping that mine comes in today. The only bad thing about cheap sellers with free shipping can be the delivery.
I hate not having any type of tracking.
ricktat said:
I am hoping that mine comes in today. The only bad thing about cheap sellers with free shipping can be the delivery.
I hate not having any type of tracking.
Click to expand...
Click to collapse
I decided to up and order one of these myself. I don't make enough calls to care about that stupid mic anyways...lol
I just got mine I in today and I'm wondering if there's a hip case that this would fight on?
If you guys do care about the second mic, Otterbox does make an I777-specific Commuter case. I have one. Here's the link. Might be more expensive since you'd be buying it from them directly at full price and because it's hard to find, but I think it's worth every penny anyway, over a year and still going strong.
Bought my otterbox commuter case off of Amazon about a month ago for 20usd and am very happy with it. Have had no problems with any functionality from it.
Sent from my SGH-I777 using xda app-developers app
Related
im getting the s2 today and was wondering what case to get? does the cancellation mic matter if im on CM7? i dont care if i hav to cut a hole in the case. i would get the otterbox but idk what it'll do to the mic
I'm patiently waiting for this:
http://www.seidioonline.com/att-samsung-galaxy-s-II-active-case-black-p/csk3ssg2a-bk.htm
But I'll get the one with the included holster:
http://www.seidioonline.com/att-samsung-galaxy-s-II-active-case-holster-black-p/bd2-hk3ssg2a-bk.htm
Check out the Case Mate POP! case. It'rugged, has mic holes, a kickstand, and fits perfectly on the SGS2.
Sent from my SAMSUNG-SGH-I777 using XDA Premium App
I have Ringke silicon case and it works great!
wrenchmonkey26 said:
Check out the Case Mate POP! case. It'rugged, has mic holes, a kickstand, and fits perfectly on the SGS2.
Sent from my SAMSUNG-SGH-I777 using XDA Premium App
Click to expand...
Click to collapse
+1 This is what I have. It has a firm fit on the phone. Real good grip and not bulky.
Sent from my SAMSUNG-SGH-I777 using xda premium
wrenchmonkey26 said:
Check out the Case Mate POP! case. It'rugged, has mic holes, a kickstand, and fits perfectly on the SGS2.
Sent from my SAMSUNG-SGH-I777 using XDA Premium App
Click to expand...
Click to collapse
+1 - CaseMate POP case and a Moshi iVisor (They better be careful. I think Apple owns a copyright on any word starting with a lower-case "i", and they seem to be a little sue-happy recently). Same setup I had on my Samsung Infuse. The only thing I didn't like about that case was the lack of a kickstand, and this one's got it. Perfect!
The only thing I don't like about the pop case is it seems to only come in white/grey, otherwise love the case.
Asking what case to get is like asking what kind of car you should get. It's very much personal taste, hehe.
With that said, I was in Asia last week and came back with about 20 different designs. The one I favor is a 0.2mm case (just ebay it there are tons)... they're only a couple bucks, and they provide scratch\scuff protection, and are the ultimate in thinness. They don't provide very good grip though.
The Ringke silicon case is alright, I have one in red which looks nice, but it's not ideal for me because with any silicon case I find the sides are not as tight fitting to the phone as I like (problem with ANY silicon case, most people are fine with it but I'm a bit OCD).
There is a TPU case I bought on Amazon:
http://www.amazon.com/gp/product/B005OTAUG6
And thus far this TPU case has been my absolute favorite of all the 10 or so cases I have. It's got the right amount of grip, but isn't sticky removing from pocket like a silicon is, and it's absolutely tight-fitting and has the ATT mic cutouts, and the color is cool. Not super crazy about the argyle back, but the color is nice, so it works.
But again, personal taste is a lot of it. If you order from somewhere like Amazon if you don't like the case you can return it without hassle.
#10 on this list
http://www.traemcneely.com/2011/10/...i777-samsung-galaxy-s2-sii-cases-covers-sgs2/
I just received my Acase from Amazon today. I have to say it's pretty nice. It's a silicon case, but with a hard case on top of it. It adds a bit of bulk, but it is definitely fully protected. It's as thick as my current gen iPod classic now. Not too great, but not too bad for $10.
I just got a GS2 and trying to decide whether or not to get a case. Do you guys suggest getting one for added protection from drops?
EDIT: Ok, clearly a case is necessary, but which one? I have an Otterbox Commuter on my iPhone and dig the feel and durability. I see many complaints about SG2 cases not fitting or not having the right holes. Which is the best case in terms of fit, durability, and feel?
I definitely would. Protects from scratches, marks, and dust. I wouldnt count on it to protect from a normal drop though. I would suggest the Otterbox Commuter (make sure its the ATT i-777 version)
It's a $500+ phone you have. If you're ok with it breaking, then go without a case.
That's not saying it will break. There are plenty of stories about how well this phone does when dropped.
But it's the same reason people wear seat belts. 99% of the time they don't do much. But that 1% when you're in an accident, you're really happy you had it on.
It only takes one bad drop to ruin your phone. And screens for samsung devices are super expensive.
Sent from my SAMSUNG-SGH-I777 using XDA App
SupremeOverlord777 said:
I definitely would. Protects from scratches, marks, and dust. I wouldnt count on it to protect from a normal drop though. I would suggest the Otterbox Commuter (make sure its the ATT i-777 version)
Click to expand...
Click to collapse
Are you sure that Otterbox makes a case for the AT&T version? I checked around and only found a Commuter for International version.
I have an Otterbox Commuter now for my iPhone and love it.
They just released an att version for the otterbox commuter. I have the international and its fits flawlessly. The top Mic cut out is off but the call quality is still the same. Paid 20 bucks on Amazon for it
Sent from my SAMSUNG-SGH-I777 using xda premium
I just received this one and it fits flawlessly. They have 2 or 3 different colors. This one is a matte finish on the back and does not show any fingerprints and the TPU material feels great in the hand.
http://www.ebay.com/itm/260867073633?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
cheetablaze said:
They just released an att version for the otterbox commuter.
Click to expand...
Click to collapse
You sure? I checked Otterbox's site and Amazon. Can't find it.
iFalcon said:
I just received this one and it fits flawlessly. They have 2 or 3 different colors. This one is a matte finish on the back and does not show any fingerprints and the TPU material feels great in the hand.
http://www.ebay.com/itm/260867073633?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Click to expand...
Click to collapse
Thanks! I'm looking at some TPU cases. Are they durable?
Just found a really cool one http://www.amazon.com/gp/product/B005OT75K0/ref=cm_ciu_pl_B005OT75K0_mo39VUI8EBFWYGJ
mzaur said:
You sure? I checked Otterbox's site and Amazon. Can't find it.
Click to expand...
Click to collapse
http://www.otterbox.com/Samsung-Gal...r=20&start=1&cgid=samsung-galaxy-s-2-cases-us
mzaur said:
I just got a GS2 and trying to decide whether or not to get a case. Do you guys suggest getting one for added protection from drops?
EDIT: Ok, clearly a case is necessary, but which one? I have an Otterbox Commuter on my iPhone and dig the feel and durability. I see many complaints about SG2 cases not fitting or not having the right holes. Which is the best case in terms of fit, durability, and feel?
Click to expand...
Click to collapse
This is going to depend a lot on how you use your phone. I am using the casemate barely there which provides a moderate level of drop protection while maintaining the slim profile and light feel that I really love about the Galaxy phones. But when I need to travel for work I put on the Ballistic case which has huge rubber corners and feels indestructible which is nice when you are moving around a lot and adding a much greater risk of dropping your phone. The otterbox commuter is a decent case, my wife has one on her iPhone 4. It seems to be a nice middle road between something like the "barely there" and the Ballistic.
Did you drop your old phone a lot?
mzaur said:
You sure? I checked Otterbox's site and Amazon. Can't find it.
Click to expand...
Click to collapse
Here you go
http://www.otterbox.com/Samsung-Gal...r=20&start=1&cgid=samsung-galaxy-s-2-cases-us
There is a balance between protection and bulk in cases
I don't want a case that inhibits the phone from venting heat. And I don't want one that is too bulky. I've tried a lot of different cases, and this is the one that I like best:
http://www.ebay.com/itm/320771114659
Just don't drop it from too high above a floor that's too hard, and it should protect the phone OK. And at this price you can get a couple of them as spares, since they will crack occasionally.
The other thing about this case is the matte rubberized finish. Helps the phone to stay put in your pocket. It also makes the phone feel much more secure when holding it in your hand.
Here's a list of many of the available i777 cases:
http://www.traemcneely.com/2011/10/...i777-samsung-galaxy-s2-sii-cases-covers-sgs2/
The SGS ballistic case is way too big and the bumpers snag in your pocket. The case mate pop is great as long as you don't mind the shiny back scratching all to hell in two weeks. Also the grey plastic around the edge flakes off really easily. The commuter is smaller than both and likes to draw dust... The thin cases will never completely protect your phone. Always had otterbox, always will keep using otterbox.
mzaur said:
Thanks! I'm looking at some TPU cases. Are they durable?
Click to expand...
Click to collapse
TPU cases have a tendency to stretch if you take them on and off too much. I had one for about 2 weeks and it was already feeling loose and I was only taking it on/off about once a day.
And they attract lint like mad. The reason I was taking it off daily was to rinse it off.
Sent from my SAMSUNG-SGH-I777 using xda premium
cheetablaze said:
Here you go
http://www.otterbox.com/Samsung-Gal...r=20&start=1&cgid=samsung-galaxy-s-2-cases-us
Click to expand...
Click to collapse
35 bucks! Damn. Not any cheaper on Amazon. That's a bit too much for me.
Thanks guys for the tips. I ordered a couple cheap hard TPU cases like some recommended here to see how they are. Perhaps I'll need more protection and look into something else.
I didn't drop my old phone a lot, but I did once in a while drop it from my desk. I don't have insurance on my GS2 so I would like some protection in case it drops since the phone feels fairly fragile.
Can anyone recommend a middle of the line case between thin TPU cases and the Ballistic? I know Otterbox is along those lines but $35 is too much!
cheetablaze said:
The SGS ballistic case is way too big and the bumpers snag in your pocket. The case mate pop is great as long as you don't mind the shiny back scratching all to hell in two weeks. Also the grey plastic around the edge flakes off really easily. The commuter is smaller than both and likes to draw dust... The thin cases will never completely protect your phone. Always had otterbox, always will keep using otterbox.
Click to expand...
Click to collapse
I agree with your line of reasoning here. I loved the Otterbox on my iPhone. I liked the hardness of it. My girlfriend had an Otterbox Defender and that was just too much. Did you pay $35 for the Otterbox?
cheetablaze said:
Here you go
http://www.otterbox.com/Samsung-Gal...r=20&start=1&cgid=samsung-galaxy-s-2-cases-us
Click to expand...
Click to collapse
35 bucks! Damn. Not any cheaper on Amazon. That's a bit too much for me.
Thanks guys for the tips. I ordered a couple cheap hard TPU cases like some recommended here to see how they are. Perhaps I'll need more protection and look into something else.
I didn't drop my old phone a lot, but I did once in a while drop it from my desk. I don't have insurance on my GS2 so I would like some protection in case it drops since the phone feels fairly fragile.
Can anyone recommend a middle of the line case between thin TPU cases and the Ballistic? I know Otterbox is along those lines but $35 is too much!
maybe the case-mate pop. conflicting reports on whether it has the right holes or not. it also has the built in kickstand
---------- Post added at 06:20 AM ---------- Previous post was at 06:19 AM ----------
oh, also, the otterbox should come down in price soon, like the intl. GS2 version has.
I have the casemate barely there and the casemate and the casemate full version. Both work great and give flexibility.
Sent from my SCH-I800 using xda premium
The Case-Mate Pop! is the best I've found. It is a hard plastic case that is lined on the inside with rubber for shock absorption. It also has rubber inserts on the outside along each edge. Has a very solid feel with good grip. There is also a fold out stand but I don't really use it that often. Nice feature to have though.
It does add a little to the bulk of the phone but not as much as the Otterbox or other heavy duty cases. I found it a good compromise between size and protection. I think it's well worth it for something that fits perfectly and feels really good in the hand.
All of the holes line up perfectly on this case even it's categorized under the International SII. The noise canceling mike on top is included in the microphone cutaway. No noticeable difference in signal quality or phone call quality.
Sorry, tried to post a link but I'm too new. You can go to Case-Mate's website and look under the Samsung Cases, Samsung Galaxy SII, International version.
I have the Casemate Barely There Aluminum, SGP Linear, and some mesh one I got for $3 on ebay. Out of all of these I prefer the SGP Linear. It completely protects the phone, leaving no edges exposed, feels like quality, and keeps the slim profile of the phone. I had to make a little hole for the noise cancelling mic but that was easy.
As everyone knows, the commuter case is sold out on the official website. I just found it on Ebay for 28.99 + Free Shipping
There is also one with a car charger for only a dollar more.
I would post a link but as you can see I don't have more than 8 posts.
Just search : Rezound Otterbox it should come up
I just ordered one on ebay that came with the Commuter Case, a horizontal leather pouch that fits with the Otterbox and a car charger. All of this was for $34.99 with free shipping. They also have the Defender with the same options for $44.99.
Here is a link.
x3demond3x said:
As everyone knows, the commuter case is sold out on the official website. I just found it on Ebay for 28.99 + Free Shipping
There is also one with a car charger for only a dollar more.
I would post a link but as you can see I don't have more than 8 posts.
Just search : Rezound Otterbox it should come up
Click to expand...
Click to collapse
yeah i ordered it yesterday for the same price. It just shipped today...WOO-HOO
x3demond3x said:
As everyone knows, the commuter case is sold out on the official website. I just found it on Ebay for 28.99 + Free Shipping
There is also one with a car charger for only a dollar more.
I would post a link but as you can see I don't have more than 8 posts.
Just search : Rezound Otterbox it should come up
Click to expand...
Click to collapse
Patiently waiting for mine to arrive
I just ordered a case for $22.95 shipped. 10 Left
Otter Commuter
NilsP said:
I just ordered a case for $22.95 shipped. 10 Left
Otter Commuter
Click to expand...
Click to collapse
I got one on the same Auction. Shipped Today.
Why Otterbox
Quick question, but why Otterbox?
Good quality case, or thinnest? Does it work with the verizon sold window mount?
(Not trolling, I just don't know.)
Xsoldier2000 said:
Quick question, but why Otterbox?
Good quality case, or thinnest? Does it work with the verizon sold window mount?
(Not trolling, I just don't know.)
Click to expand...
Click to collapse
Good looking case that is a solid build. It is definately not the thinnest case though. I don't think that it would work with the window mount.
Devildog8791 said:
I don't think that it would work with the window mount.
Click to expand...
Click to collapse
Wondering if anyone has tried it yet? I know the high gloss Silicon case fits in the car mount (as the mount comes with inserts to allow either an extended battery, or a reg. battery, with case... to fit.)
Anyone?
I've been using the case for about a day now and might just keep the black tpu one from Verizon. In hand, the case feels great and I like how the ports have flaps to keep junk from getting inside. The only downside I've found is the silicone attracts a ridiculous amount of lint. Took it out of my jacket pocket this morning and it practically needed to be wiped down with a damp cloth. I'll be damned if I am going to carry around wet naps to keep this thing clean
Jesus Christ doesn't that bother The hell out you? It drives me crazy LOL. I'm in construction so I keep my phone in a sandwich baggy at all times in work, while its in my pocket. But as soon as I take it outta the bag and put it in my pocket, you can forget it. It becomes a frikken mess. Bit its not too bad. I liked the one for my EVO 3D better. Ohh well, that's life I guess
Sent from my ADR6425LVW using Tapatalk
Wobblin30 said:
I've been using the case for about a day now and might just keep the black tpu one from Verizon. In hand, the case feels great and I like how the ports have flaps to keep junk from getting inside. The only downside I've found is the silicone attracts a ridiculous amount of lint. Took it out of my jacket pocket this morning and it practically needed to be wiped down with a damp cloth. I'll be damned if I am going to carry around wet naps to keep this thing clean
Click to expand...
Click to collapse
I'd much rather deal with the lint than a broken phone lol. My defender is coming next week.
Otterbox commuter case
got it on Ebay for 22.95 + Free Shipping
Xsoldier2000 said:
Wondering if anyone has tried it yet? I know the high gloss Silicon case fits in the car mount (as the mount comes with inserts to allow either an extended battery, or a reg. battery, with case... to fit.)
Anyone?
Click to expand...
Click to collapse
Nope. I just got mine and tried it with the "iBolt" car mount made for the RZD and it does not fit properly. It isn't a matter of overall size - it's the fact that Otterbox cases usually, as in the case of the RZD cases, have a plug/flap over the USB connector. Unless you can live with cutting it off, you can't fit the Commuter case in the dock because the flap is in the way, open or closed.
Wobblin30 said:
I've been using the case for about a day now and might just keep the black tpu one from Verizon. In hand, the case feels great and I like how the ports have flaps to keep junk from getting inside. The only downside I've found is the silicone attracts a ridiculous amount of lint. Took it out of my jacket pocket this morning and it practically needed to be wiped down with a damp cloth. I'll be damned if I am going to carry around wet naps to keep this thing clean
Click to expand...
Click to collapse
Please carry around Wet Naps. I have stock in the company. Help a brother out!!
Just got mine yesterday. Does add some girth to the phone and plastic backing makes it a bit difficult to hold.
It's an alright case. Hopefully Seidio makes one for the RZ soon.
Sent from my ADR6425LVW
Marcismo55 said:
Just got mine yesterday. Does add some girth to the phone and plastic backing makes it a bit difficult to hold.
It's an alright case. Hopefully Seidio makes one for the RZ soon.
Sent from my ADR6425LVW
Click to expand...
Click to collapse
+ 1 loved my active case on my Inc 2
Sent from my ADR6425LVW using XDA App
Marcismo55 said:
Just got mine yesterday. Does add some girth to the phone and plastic backing makes it a bit difficult to hold.
It's an alright case. Hopefully Seidio makes one for the RZ soon.
Sent from my ADR6425LVW
Click to expand...
Click to collapse
The plastic backing was the only thing I liked about the case
Wobblin30 said:
The plastic backing was the only thing I liked about the case
Click to expand...
Click to collapse
Visually, yes it does look pretty cool and would do a good job protecting the phone in case of a drop, however, the plastic is VERY slick. I've almost dropped the phone because of the backing plate of the case.
I guess I'll just keep this one until the Seidio Surface comes out and sell this Otterbox.
Marcismo55 said:
Visually, yes it does look pretty cool and would do a good job protecting the phone in case of a drop, however, the plastic is VERY slick. I've almost dropped the phone because of the backing plate of the case.
I guess I'll just keep this one until the Seidio Surface comes out and sell this Otterbox.
Click to expand...
Click to collapse
Just got mine today and feel exactly the same way. The plastic back makes it kind of slick in the hand. Does OK in the pocket.
Plus it does not fit in my cup holder stand.
I do like the screen save though. Comes close to covering the entire screen.
So I've been reading around and it seems that a lot of people are having trouble finding a nice and fitted case. Now I came frome a cappy to the i777 and I wanted somthing that was like the bodyglove case for the captivate. I found a case on Amazon that I thought would fit the i777 just right. It came in yesterday and it fits perfectly! Everythingis cut out where its supposed to be, yes even the noise canceling mic on top. Its not thick and it keeps the phone slim. Has nice grip on the sides so it doesn't slip. Fits the phone perfect. All in all seems to be an awesome case. And its only like $9 with shipping! Good deal!
Here is the link:
www.amazon.com/CIMO-S-Line-Shell-Sa...MHSI/ref=sr_1_1?ie=UTF8&qid=1324843292&sr=8-1
Sent from my SAMSUNG-SGH-I777 using XDA App
http://www.ebay.com/itm/Black-S-Sha...ccessories&hash=item20c014ce8a#ht_3325wt_1396
That's way cooler haha
Sent from my SAMSUNG-SGH-I777 using XDA App
I got this one. Best i've ever had, by far.
http://www.ebay.com/itm/AT-T-SAMSUN...ccessories&hash=item43ac0056e3#ht_4295wt_1394
I got a TC matte black slim case that is great and was $9 shipped from amazon. Highly recommended.
+1 for the TC case, nice fit and no frills.
browncarpet said:
I got a TC matte black slim case that is great and was $9 shipped from amazon. Highly recommended.
Click to expand...
Click to collapse
I got the case mentioned in the OP but for 2.95 on eBay. Have to say this is one of the best fitting and best looking tpu cases I've owned. All the cutouts are spot on and its thin with ok protection for a tpu case. Way satisfied and would def recommend it to anyone.
Sent from my SAMSUNG-SGH-I777 using xda premium
I was looking at the TC case but wasn't sure about it. I had ordered one from ebay and it didn't fit. Its was to small. But I'll look into the Amazon one
Sent from my SAMSUNG-SGH-I777 using XDA App
mickey4mice said:
+1 for the TC case, nice fit and no frills.
Click to expand...
Click to collapse
+1 more. Best case I've used so far.
Sent from my SAMSUNG-SGH-I777 using xda premium
can i get photos?
I just got this one in the mail before Christmas (along with some screen protectors). This thing is good. double layer protection along with covers for the earphone jack and usb port. Feel as sturdy or more than otterboxes I have seen. Some people don't like the bulk but I like the thicker grip.
http://www.ebay.com/itm/Black-Kickstand-Double-Layer-Hard-Gel-Case-Samsung-Galaxy-S2-AT-T-Attain-i777-/150706345470?pt=PDA_Accessories&hash=item2316cc55fe#ht_3132wt_1185
Is the case OP posted really rubbery or what? I'm looking for a slim case that doesn't stick in my pockets.
+ one more for the matte black TC case. Had it since a week after launch. Cut outs are all correct, (though I widened the usb and headphones cutouts with an xacto knife to fit aftermarket audio and usb plugs that I had - stock stuff fit fine with no mods) keeps the slim profile of the phone, and makes it fit my hand a little better, so less chance of drops.
Sent from my SGH-I777 using XDA App
I'm looking into the case that the OP mentioned. I found a five case deal on ebay coming from Hong Kong. I just got my phone (no case protection) and it'll pain me too much to see how long the shipping will take, it is free though.
I wonder if people are seeing good results on all of these cheap cases from ebay, by that I mean after a few months of use.
Question, OP
I'm coming from a Cappy with the excellent Body Glove TPU case. It was the best case I've ever had for a phone, and I was wondering if the case OP posted is flexible TPU, or hard, rigid plastic that can't be flexed. I wonder this because I need access to the back sd card and battery often, and the material of the case determines if I buy it or not.
Thanks for any answers to my question.
pilotdude22 said:
I'm coming from a Cappy with the excellent Body Glove TPU case. It was the best case I've ever had for a phone, and I was wondering if the case OP posted is flexible TPU, or hard, rigid plastic that can't be flexed. I wonder this because I need access to the back sd card and battery often, and the material of the case determines if I buy it or not.
Thanks for any answers to my question.
Click to expand...
Click to collapse
This one?
"CIMO (TM) S-Line Soft Shell TPU Case for Samsung Galaxy S II i777, AT&T - Black"
It says TPU in the title
pilotdude22 said:
I'm coming from a Cappy with the excellent Body Glove TPU case. It was the best case I've ever had for a phone, and I was wondering if the case OP posted is flexible TPU, or hard, rigid plastic that can't be flexed. I wonder this because I need access to the back sd card and battery often, and the material of the case determines if I buy it or not.
Thanks for any answers to my question.
Click to expand...
Click to collapse
They make a body glove TPU case for the SGS2, the same one as the captivate.
skatin707 said:
They make a body glove TPU case for the SGS2, the same one as the captivate.
Click to expand...
Click to collapse
Really?? For the i777? Link/info? I only found the international version.
pilotdude22 said:
Really?? For the i777? Link/info? I only found the international version.
Click to expand...
Click to collapse
Go to walmart or the ATT store near you and get one. I haven't looked for them online, just stumbled across them in store.
skatin707 said:
Go to walmart or the ATT store near you and get one. I haven't looked for them online, just stumbled across them in store.
Click to expand...
Click to collapse
Cool, thanks man.
Has anybody tried one of these cases for the Note? It is a belt clip/kickstand holster. I was wondering if the belt clip is durable or if it feels really cheap or loose. Also curious if the phone will fit this case with the glas.t installed on the screen.
http://www.ebay.com/itm/Black-Hard-...ccessories&hash=item460443efd4#ht_1511wt_1397
many users have brought this. Very good one. Build quality is not very high class but sturdy and maintains the phone well.
Thanks for the info. Trying to get a few accessories ordered ahead of time so when I get the phone I will have them already.
I have this case, here are a few pix,
I also have Moshi iVisor screen protector and no issue with case.
Stand/belt clip sturdy so far.
I have this case, too. Works as advertised. Very decent, especially for the price. I also have the Seidio Active Combo. Seidio is nicer. More of a Cadilac while this one is more of a Ford.
Yes But Minimal Protection
ElAguila said:
Has anybody tried one of these cases for the Note? It is a belt clip/kickstand holster. I was wondering if the belt clip is durable or if it feels really cheap or loose. Also curious if the phone will fit this case with the glas.t installed on the screen.
http://www.ebay.com/itm/Black-Hard-...ccessories&hash=item460443efd4#ht_1511wt_1397
Click to expand...
Click to collapse
If you drop it top and bottom of the phone is vulnerable.:crying:
I've have this exact case that I've bought from Cellphoneshop.com for the same price(9.00) when I just bought my phone 2 months ago. I"m just waiting for the otterbox comes out!! ATT doesn't know when they will be released!!!
This will just be a case to tide me over until I get the seidio combo with holster.
is300 said:
I've have this exact case that I've bought from Cellphoneshop.com for the same price(9.00) when I just bought my phone 2 months ago. I"m just waiting for the otterbox comes out!! ATT doesn't know when they will be released!!!
Click to expand...
Click to collapse
The Otterbox's, both Defender and Commuter have been out for awhile now. Hit up eBay or the web. I love my Defender! Also, there are threads about these too. Don't buy from AT&T though... Priced too high.
Sent from my SAMSUNG-SGH-I717 using XDA