Hi to everyone here my son had a samsung vibrant i bought him i really don't know what he did to it so i googled and found this great site so far i made my usb jig and got it to download mode used Odin flashed it with pit and the other file Odin says everything is alright but when it reboots and after the samsung galaxy screen goes away i still get the black screen any help would be great and thank you in advance
Andriod-PR said:
Hi to everyone here my son had a samsung vibrant i bought him i really don't know what he did to it so i googled and found this great site so far i made my usb jig and got it to download mode used Odin flashed it with pit and the other file Odin says everything is alright but when it reboots and after the samsung galaxy screen goes away i still get the black screen any help would be great and thank you in advance
Click to expand...
Click to collapse
I would suggest you use this guide here... http://rootzwiki.com/topic/605-guid...nja-apps-everything/page__p__11106#entry11106
Also, while following the guide you may watch this video for a visual reference. However, stop watching at 5:15! Also, follow the guide (link above) exactly. So make sure you use its files (pit, Odin application, & tar).
Tell me if this guide helps you fix your sons phone.
Thanks you i'll try right it now
Related
hey I know there has been many threads about this but my case is unique and believe me i spent more than 6 hours searching the forums for a fix but no luck
I have a brand new Samsung Galaxy S2...tried to root it and it is stuck on boot loop
so i tried the steps written on the thread (do not post a new thread) but it is not working because i can not get inot recovery mode at all
I installed a stock xxki3 and still I can not fix the problem...
please help me
Can you post your device info.
Eg: I9100 international version
Sent from my GT-I9100 using XDA App
Yep, you're truly unique
Why not start with telling us your exact product and what happens when trying to get into both recovery and download modes.
my device is I9100 middle east version
it says when i remove the battery MODEL: GT-I9100G
problem description:
I turned on the device as soon as i bought it and it said 2.3.4
so I downloaded everything needed to root it and i started odien and everything went well....except for the fact that my galaxy got stuck with galaxy s logo screen and big yellow triangle at the bottom....and nothing else happen.... it says like this for hours and hours....
so i tried to go inot recovery mode...but nothing happens after doing the volume up+power+home ...still takes me to the previous screen with yellow triangle
tried download mode and it works fine....
i can go into download mode but not the recovery mode
please guys what do i do
mukalaaa said:
my device is I9100 middle east version
it says when i remove the battery MODEL: GT-I9100G
problem description:
I turned on the device as soon as i bought it and it said 2.3.4
so I downloaded everything needed to root it and i started odien and everything went well....except for the fact that my galaxy got stuck with galaxy s logo screen and big yellow triangle at the bottom....and nothing else happen.... it says like this for hours and hours....
so i tried to go inot recovery mode...but nothing happens after doing the volume up+power+home ...still takes me to the previous screen with yellow triangle
tried download mode and it works fine....
i can go into download mode but not the recovery mode
please guys what do i do
Click to expand...
Click to collapse
You need to download files to use for your specific phone and try again. You said you have a GT-I9100G, right? Well, where did you get the files you used to root?
You also said in the title of this post that you installed XXKI3. Well, installing XXKI3 and rooting are not the same thing. Which did you do? Root using an insecure kernel? Or install an XXKI3 firmware?
I'm going to go ahead and guess that you tried to flash a firmware intended for the regular GT-I9100, and not the GT-I9100G. These two phones have different hardware, so firmwares are NOT compatible.
Amirite?
first I tried to root it using insecure kernel...when it got stuck with galaxy s 2 logo screen with yellow triangle.... I searched all over the net for a solution and one of the solutions was is to flash xxki3 ....and I did that.... but it always fail.... I also tried to flash litening rom... but at the end...it fails at MODEM stage i believe....
Now all i want is to get my phone working....I dont wanna root it anymore....
please guys please help me
Stop flashing it.
You are doing more damage.
You have the 9100G, but you're flashing 9100 stuff
I am not flashing it anymore.... but I need a solution.... I want to know how can I get it back up and running
please help me
guys i found a 2.3.6 for my GT-i9100G
but still gives me fail red color in odien
please help me
You could try flashing this kernel.
http://forum.xda-developers.com/showthread.php?t=1369977
Sent from my GT-I9100 using XDA App
mukalaaa said:
guys i found a 2.3.6 for my GT-i9100G
but still gives me fail red color in odien
please help me
Click to expand...
Click to collapse
When you get the error, does it say failed red color? Of course not.
Tell us excactly the error you are getting! If you want our help give us all the information that you have.
What error message did you get? What are the steps you took?
Hi everyone
i live in north africa in algeria
i tried to flash my i9100G nwith the latest stock ics
everytjing went well unitil a big red fail apeared on odin
my phone doesn t turn on i got a pc with phone they told this is the sead screen
whatever please help me to slove this problem
& thanks for every one
I flashed ics xxlpq
no problem just flash the stock rom again but this time with pit
Hello,
please see this excellent repair guide:
http://forum.xda-developers.com/showthread.php?t=1448765
and let us know if it works for you.
can you give me a link for a stock rom with the pit file & thanks alot
nouninou said:
can you give me a link for a stock rom with the pit file & thanks alot
Click to expand...
Click to collapse
Did you even read the tutorial??, there clearly states where to download the files,
thats why you bricked your phone, you have to readdd everything and understand things before going up
I hope this options works for you !!
Hey, read this options to solve this problem. The second option Worked for me
1. if you´re phone doesn´t turn on and the screen not response maybe the problem is a hardbrick,
2.if you´re galaxy doesnt turn on but in the screen appears icons, the trouble is softbrick.
1.The solution for a hardbrick is a JTAG, this is a used method by Tecnics
2. The solution for a softbrick is a reinstall , just put the galaxy in download mode and install a official firmware with odin and done
after downloading a pit file it works
thank you very much
hi
i flashed my galaxy s2 with only PIT file by odin
after that my phone turned off
and now i can't turn it on or get into download mode or anything
I've tried SOFT & HARD reset and nothing helped
can you guys please help me .
mad921 said:
hi
i flashed my galaxy s2 with only PIT file by odin
after that my phone turned off
and now i can't turn it on or get into download mode or anything
I've tried SOFT & HARD reset and nothing helped
can you guys please help me .
Click to expand...
Click to collapse
You've bricked your device. Congratulations.
Only option is to get a JTAG repair or replace motherboard.
Why on earth did you partition your device? You have probably used a incompatible PIT file. Maybe next time you will be more careful or research things properley before attempting to do this kind of thing.
i dunno what is it with people and pit files. whenever i see a pit file i go like "hell no".
that's maybe because i've read a couple of threads like this.
from sii xda-ded
Hi all.
I have already posted my problem in this thread which I have read to the end ( [GUIDE] Fix an unflashable or soft bricked I9100G )
but was not able to get any solution so I'm starting a new thread hopefully someone might be able to help me and sorry if I was not suppose to start a new thread.
My problem is as follows and hope that someone can help.
I have downloaded odin mobile and installed it on my S2 I9100 G which previously had CM 10 installed on it and I wanted to flash the official firmware using Odin mobile. I did run it and then the phone prompted me for M5 or Md5 that was detected and should click yes to verify before flashing. I clicked yes then it started verifying and when it was done it rebooted and then was stuck on the (Samsung Galaxy S2 GT-19100G black screen) and did not want to move. I waited for an hour and a half and nothing happened. When I removed the battery (I could not reset or do anything else) and put it back, the phone turned on by itself and stayed still on the starting screen (Samsung Galaxy S2 GT-19100G black screen)
Now I'm not being able to put it in recovery nor download mode.
Can any one help and anyone knows if the jtag dongle can actually force it to go to download mode even at this stage
Thanks in advance for any suggestion
Ok thank you guys. I think I was able to fix it and revive my phone.
go to service centre they solve your problem
Sent from my GT-I9100G using xda premium
Make sure you got the right M.O kernel (I9100G).
Sent from the little guy
Hi, I am having problem with my samsung galaxy s6102.I flashed my phone with S6102_DDLG1_ODDLF1_DDLG1_INU_wipe_by_manoranjan2050.org using Odin.After flashing it got stuck in the samsung logo then kept restarting...Then i removed the battery and put it in again.Then i could see the setup screen where it says "touch the android to begin".But the touch screen is not working after that .Volume,power button and home button works fine only the touch screen not working.. I flashed it many times but the touch screen wont work. Please help me how to solve this problem.Thanks
Me too! Is there anybody who knows a fix??
sanjoyd4 said:
Hi, I am having problem with my samsung galaxy s6102.I flashed my phone with S6102_DDLG1_ODDLF1_DDLG1_INU_wipe_by_manoranjan2050.org using Odin.After flashing it got stuck in the samsung logo then kept restarting...Then i removed the battery and put it in again.Then i could see the setup screen where it says "touch the android to begin".But the touch screen is not working after that .Volume,power button and home button works fine only the touch screen not working.. I flashed it many times but the touch screen wont work. Please help me how to solve this problem.Thanks
Click to expand...
Click to collapse
I have got the same probleme, and have tried every available solution....I hope not! Are there any kind of fix beside flashing with Odin(with & without Pit-file), tried flashing new Rom.....
After flashing everything looks good until I have to punch in Pin for my Sim-card......No go:crying:
Any tip will be appreciated
I found the solution Firmware(Chile) for Gt-s6102B did it!!! Downloaded (S6102BVJMC2_S6102BCHOMD1_CHO)
from sammobile(free registration needed)
used Odin 3 v3.07..........(run as admin)
Only add "pad-file"....
Hit start, and a few minutes later....Voila..Touch is working again
sanjoyd4 said:
Hi, I am having problem with my samsung galaxy s6102.I flashed my phone with S6102_DDLG1_ODDLF1_DDLG1_INU_wipe_by_manoranjan2050.org using Odin.After flashing it got stuck in the samsung logo then kept restarting...Then i removed the battery and put it in again.Then i could see the setup screen where it says "touch the android to begin".But the touch screen is not working after that .Volume,power button and home button works fine only the touch screen not working.. I flashed it many times but the touch screen wont work. Please help me how to solve this problem.Thanks
Click to expand...
Click to collapse
http://www.mediafire.com/download/t...MA3_S6102OJPMA3_S6102XXMA2_HOME.tar.part1.rar
http://www.mediafire.com/download/1...MA3_S6102OJPMA3_S6102XXMA2_HOME.tar.part2.rar
odin 3.07
POST RESULT AFTER
B.R
ELGHANDOR
GT-S6102 After flash touchpad not working Solution.....!!
1. Flash with Odin307
2.file is S6102DDMF4_S6102ODDMF4_S6102DDMF4_HOME.tar.md5
Thanks in Arabic ...... شكرا
elghandor said:
http://www.mediafire.com/download/t...MA3_S6102OJPMA3_S6102XXMA2_HOME.tar.part1.rar
http://www.mediafire.com/download/1...MA3_S6102OJPMA3_S6102XXMA2_HOME.tar.part2.rar
odin 3.07
POST RESULT AFTER
B.R
ELGHANDOR
Click to expand...
Click to collapse
Thanks in Arabic .... شكرا
:good: :good:
I am too looking for solution
I also got the same problem can you tell me how to flash the mobile? As i am noob in this things! can you step by step instructions??
teiningen said:
I have got the same probleme, and have tried every available solution....I hope not! Are there any kind of fix beside flashing with Odin(with & without Pit-file), tried flashing new Rom.....
After flashing everything looks good until I have to punch in Pin for my Sim-card......No go:crying:
Any tip will be appreciated
I found the solution Firmware(Chile) for Gt-s6102B did it!!! Downloaded (S6102BVJMC2_S6102BCHOMD1_CHO)
from sammobile(free registration needed)
used Odin 3 v3.07..........(run as admin)
Only add "pad-file"....
Hit start, and a few minutes later....Voila..Touch is working again
Click to expand...
Click to collapse
teiningen said:
I have got the same probleme, and have tried every available solution....I hope not! Are there any kind of fix beside flashing with Odin(with & without Pit-file), tried flashing new Rom.....
After flashing everything looks good until I have to punch in Pin for my Sim-card......No go:crying:
Any tip will be appreciated
I found the solution Firmware(Chile) for Gt-s6102B did it!!! Downloaded (S6102BVJMC2_S6102BCHOMD1_CHO)
from sammobile(free registration needed)
used Odin 3 v3.07..........(run as admin)
Only add "pad-file"....
Hit start, and a few minutes later....Voila..Touch is working again
Click to expand...
Click to collapse
thanks , i was having the same problem so i followed your steps and it worked for me (GT-s6102B) but it was missing Arabic so i flashed S6102JPMA3_S6102OJPMA3_S6102XXMA2_HOME.tar.md5 (GT-s6102) and it worked and arabic was installed
many thanks again
so, google brings this up for the problem, but i couldn't get odin to flash the full package from sammobile to the 6102B, getting splitfus2 to work was a bit of a riddle (64biit version doesn't have necessary libraries for it in cygwin need 32bit version to work) anyways, i created a few of them thought it might help anyone else with this issue and who are less tech savvy. these worked for me, there are BR and Chile roms for the 6102B, flashing non B roms seem to leave touchscreen unresponsive after flashing the phone.
links:
S6102B_VJMA2_ZTRMA2_VJMA2_wipe_by_SplitFUS2.zip 136.7 MB
https://mega.co.nz/#!TlAg0DyT!jlhrrTmg-EMTLLrMAXlQucfrUceG_dxrYQs00kEz058
S6102B_VJMC2_CHOMD1_VJMC3_wipe_by_SplitFUS2L.zip 123.0 MB
https://mega.co.nz/#!yxZCFJRJ!FzHpXR3uD7YjGRhiHN2BsNktqw9E7KJE88F9WE9UmMA
S6102B_VJME1_CHOME1_VJME1_wipe_by_SplitFUS2.zip 122.2 MB
https://mega.co.nz/#!vtR23CwJ!Bek7_29TNu3RbRVUjHqGAYBLVEwgUHieg6nOb0aN1wc
S6102B_VJME1_ZTOMI1_VJME1_wipe_by_SplitFUS2.zip 135.3 MB
https://mega.co.nz/#!25YQyD6T!ygTbUseF4uWQCA1hzEkiOS8zT2YSH1QMXkLGdwh0F6I
take no credit, just used splitfus2 to split the tar.md5 from sammobile and uploaded them to mega. worked to fix the 6102B, it went to reboot loop, flashed a 6102 rom with which touch didn't work.
sorry to bring ancient thread up, if anyone has this issue google will make it an easy fix pointing to this thread as it did for me.