Hi all.
I have already posted my problem in this thread which I have read to the end ( [GUIDE] Fix an unflashable or soft bricked I9100G )
but was not able to get any solution so I'm starting a new thread hopefully someone might be able to help me and sorry if I was not suppose to start a new thread.
My problem is as follows and hope that someone can help.
I have downloaded odin mobile and installed it on my S2 I9100 G which previously had CM 10 installed on it and I wanted to flash the official firmware using Odin mobile. I did run it and then the phone prompted me for M5 or Md5 that was detected and should click yes to verify before flashing. I clicked yes then it started verifying and when it was done it rebooted and then was stuck on the (Samsung Galaxy S2 GT-19100G black screen) and did not want to move. I waited for an hour and a half and nothing happened. When I removed the battery (I could not reset or do anything else) and put it back, the phone turned on by itself and stayed still on the starting screen (Samsung Galaxy S2 GT-19100G black screen)
Now I'm not being able to put it in recovery nor download mode.
Can any one help and anyone knows if the jtag dongle can actually force it to go to download mode even at this stage
Thanks in advance for any suggestion
Ok thank you guys. I think I was able to fix it and revive my phone.
go to service centre they solve your problem
Sent from my GT-I9100G using xda premium
Make sure you got the right M.O kernel (I9100G).
Sent from the little guy
Related
hey I know there has been many threads about this but my case is unique and believe me i spent more than 6 hours searching the forums for a fix but no luck
I have a brand new Samsung Galaxy S2...tried to root it and it is stuck on boot loop
so i tried the steps written on the thread (do not post a new thread) but it is not working because i can not get inot recovery mode at all
I installed a stock xxki3 and still I can not fix the problem...
please help me
Can you post your device info.
Eg: I9100 international version
Sent from my GT-I9100 using XDA App
Yep, you're truly unique
Why not start with telling us your exact product and what happens when trying to get into both recovery and download modes.
my device is I9100 middle east version
it says when i remove the battery MODEL: GT-I9100G
problem description:
I turned on the device as soon as i bought it and it said 2.3.4
so I downloaded everything needed to root it and i started odien and everything went well....except for the fact that my galaxy got stuck with galaxy s logo screen and big yellow triangle at the bottom....and nothing else happen.... it says like this for hours and hours....
so i tried to go inot recovery mode...but nothing happens after doing the volume up+power+home ...still takes me to the previous screen with yellow triangle
tried download mode and it works fine....
i can go into download mode but not the recovery mode
please guys what do i do
mukalaaa said:
my device is I9100 middle east version
it says when i remove the battery MODEL: GT-I9100G
problem description:
I turned on the device as soon as i bought it and it said 2.3.4
so I downloaded everything needed to root it and i started odien and everything went well....except for the fact that my galaxy got stuck with galaxy s logo screen and big yellow triangle at the bottom....and nothing else happen.... it says like this for hours and hours....
so i tried to go inot recovery mode...but nothing happens after doing the volume up+power+home ...still takes me to the previous screen with yellow triangle
tried download mode and it works fine....
i can go into download mode but not the recovery mode
please guys what do i do
Click to expand...
Click to collapse
You need to download files to use for your specific phone and try again. You said you have a GT-I9100G, right? Well, where did you get the files you used to root?
You also said in the title of this post that you installed XXKI3. Well, installing XXKI3 and rooting are not the same thing. Which did you do? Root using an insecure kernel? Or install an XXKI3 firmware?
I'm going to go ahead and guess that you tried to flash a firmware intended for the regular GT-I9100, and not the GT-I9100G. These two phones have different hardware, so firmwares are NOT compatible.
Amirite?
first I tried to root it using insecure kernel...when it got stuck with galaxy s 2 logo screen with yellow triangle.... I searched all over the net for a solution and one of the solutions was is to flash xxki3 ....and I did that.... but it always fail.... I also tried to flash litening rom... but at the end...it fails at MODEM stage i believe....
Now all i want is to get my phone working....I dont wanna root it anymore....
please guys please help me
Stop flashing it.
You are doing more damage.
You have the 9100G, but you're flashing 9100 stuff
I am not flashing it anymore.... but I need a solution.... I want to know how can I get it back up and running
please help me
guys i found a 2.3.6 for my GT-i9100G
but still gives me fail red color in odien
please help me
You could try flashing this kernel.
http://forum.xda-developers.com/showthread.php?t=1369977
Sent from my GT-I9100 using XDA App
mukalaaa said:
guys i found a 2.3.6 for my GT-i9100G
but still gives me fail red color in odien
please help me
Click to expand...
Click to collapse
When you get the error, does it say failed red color? Of course not.
Tell us excactly the error you are getting! If you want our help give us all the information that you have.
What error message did you get? What are the steps you took?
EDIT: Sorry guys, just saw the master thread. Will repost this there. x
Hi guys,
Apologies if there's a thread about this already.
I just upgraded my firmware through the settings menu on my Galaxy S2 - everything seemed to go OK, phone rebooted, now it's stuck on the SAMSUNG GALAXY SII GT-I9100 logo on a black screen indefinitely.
Tried so far:
Removing battery for a period of time, then rebooting
Booting into recovery mode and emptying the cache (have not tried factory reset yet)
Allowed to boot for 30 minutes to see if anything would happen, nothing
Can you guys offer any advice before I consider more extreme measures? I've kind of accepted I'm going to have to format the stupid thing now. Should I do a factory reset before trying to flash the firmware using Odin? I'm about to try this:
http://forum.xda-developers.com/showthread.php?t=1457458
To try to fix what I assume is a soft brick issue. Does this seem like a good idea?
Sorry if I sound like a complete n00b. I don't normally get this involved with my phone, but it's kind of forced my hand this time around
Many thanks x
no worring yet
do factory data reset
if that fails flash a stock rom using odin. search intratech thread in orignal development
Hey Guys!!!
I have bricked my Samsung Galaxy ace plus (GT7500). I was flashing this custom Atomic ROM.
First I did it successfully. The interface came where it demanded for my google account then i put in the information of my google account. The screen went blank.
Then i restarted it.but it got stuck into samsung boot logo. I even can't go through my download mode or clockwordmod.
so, was not able to use ODIN.
First ODIN Failed in flashing my ROM. then i got pissed off and switched off my mobile.
After sometime when i tried to start it. it went dead. it is even not starting. It is not even getting charged.
I know it is now bricked. Please tell me how to unbrick it.
Please help me.....
suchig8 said:
Hey Guys!!!
I have bricked my Samsung Galaxy ace plus (GT7500). I was flashing this custom Atomic ROM.
First I did it successfully. The interface came where it demanded for my google account then i put in the information of my google account. The screen went blank.
Then i restarted it.but it got stuck into samsung boot logo. I even can't go through my download mode or clockwordmod.
so, was not able to use ODIN.
First ODIN Failed in flashing my ROM. then i got pissed off and switched off my mobile.
After sometime when i tried to start it. it went dead. it is even not starting. It is not even getting charged.
I know it is now bricked. Please tell me how to unbrick it.
Please help me.....
Click to expand...
Click to collapse
First of all wrong section.. there is another section for the Ace plus, but as you already have posted i shall tell u what to do.
Remove your phone's battery. After removing your battery hold the button combination for download mode and then put put your battery back into the phone this should make your phone boot in download mode. After it is in download mode, using Odin flash one of the stock firmwares into your phone.
Press thanks if I helped.
jdgreat4 said:
First of all wrong section.. there is another section for the Ace plus, but as you already have posted i shall tell u what to do.
Remove your phone's battery. After removing your battery hold the button combination for download mode and then put put your battery back into the phone this should make your phone boot in download mode. After it is in download mode, using Odin flash one of the stock firmwares into your phone.
Press thanks if I helped.
Click to expand...
Click to collapse
Sorry but where i should post.
Thread moved to Q & A section, post in the relevant section next time.
it hard brick i think
Sent from my LG-P880 using xda app-developers app
Hello,
ive hardbricked my sgs2 .
HOW? :
I wanted to install CM9 Stable. I downloaded it and gapps too and put it i my sd card... then i did full wipe. Then it stucks. I was so stupid and put out the battery . then i turn it on and it says com.android.phone process closed. i clicked ok then it comes all the time. then i put out the battery. i turn it on and no reaction no download modus no recovery NOTHING PLEASE HELP MEEEEE:crying::crying::crying::crying:
same here bro. tell me if you find a way to fix. no response, no recovery, no charging image, no Odin, nothing. just a black screen. I wonder will they find out if I take it repaired, its still on guarantee.
Sent from my GT-I9300 using xda app-developers app
I want buy a JIG and look if its working. If it isnt working im gonna repair it for 30 €
Which rom and kernel were you running?
Sent from my Galaxy S2 GT i9100
My phone is bricked goddamit help me please.You mean ****ers.
Riiiight... Some info about what you did would be handy...
Send from my Nexus 4
DecypherT said:
Riiiight... Some info about what you did would be handy...
Send from my Nexus 4
Click to expand...
Click to collapse
Good morning
I have a serious problem my phone which is a Samsung Xcover 2 Model GT-S7701L cannot boot after I tried to root it.I can however access the download mode but not recovery.I have tried multiple things such as this:
http://forum.xda-developers.com/showthread.php?t=2204889&page=6
Look the first post by Veimus
I have the exact model and now when it boots there is a static screen then the logo for some weird reason a Samsung Galaxy home screen that then fades into glitched imagery.The device is still recognized by Odin thank god and it can still charge so it is recognize by the computer.So it is not a complete hard brick where the phone is dead.Earlier my phone had the boot loop glitch after I tried rooting it from the instructions in this thread:
http://forum.xda-developers.com/showpost.php?p=40232503&postcount=45
So I searched for hours to find a solution and then I found one on youtube and realized it was the wrong software and thats when the logo wouldnt stop.Now I tried Veimus method and my phone can only enter download mode.
I would love some help for me if possible.