I'm a complete noob and I've searched the forums and can't find an answer to my questions. (I'm sure there's some answer in Japanese on a Japanese forum somewhere, but my Japanese is not up to that level.)
I have a Toshiba Regza IS04 from AU (in Japan).
Running Android 2.2.2
Baseband Version 5014.1907.39
Kernel Version 2.6.32.9-rel [email protected] #1
Build Number FFK300
I have been researching rooting on and off for months since I first got the phone and have decided I would like to root it. My reasons for rooting:
1. I want to get rid of all the apps that were pre-installed that I don't use.
2. I would like to have the latest version of Android 4.0 Ice Cream Sandwich. (I doubt that another authorized upgrade from au is ever going to happen, since the 2.1 to 2.2 upgrade.)
It seems from reading forums that there are special builds of an OS depending on the phone?
My questions:
1. What is the best way to backup my phone before rooting?
2. What would be the best rooting method for my phone (SuperOneClick?)?
3. How can I (or even can I) upgrade my Android to 4.0?
Thanks for any help!!
Sam
To answer my own question, in case any one else wants to know:
Okay... it looks like I cannot post external links... until I post 8 times, which I don't really predict doing... so I'm going to try just removing the http at the beginning and see if it will go.
Superoneclick v2.2 does NOT work with this phone. It gets through "Rooting device... Step #7" but cannot remount.
Unrevoked does not work.
Z4root also does not work.
But I found a Japanese site with directions that did work! YES!!
hibari.2ch.net/test/read.cgi/smartphone/1320415141/
Somewhere in the page was the following information and link:
■auto_rootkit_is04_v0.5+suhax
hotfile.com/dl/134084004/f59084e/auto_rootkit_is04_v0.5suhax.zip.html
I downloaded the zip file and extracted it. I clicked on adb.exe first and then clicked on the auto_rootkit_is04 batch file. I just hit enter after each step. (It's in Japanese, but all it says is each step it is doing and then to hit any key.)
The first time I ran it, it did not work. The second time, I turned my phone off and on again before trying anything, and bingo: I had root!
Some of the Japanese threads were saying something about the problem with superoneclick was that the is04 took too long to mount and so there was an error. At least, I think that's what it said. My Japanese is okay, but not always good enough for this type of stuff.
I hope this can help someone else.
Thank you so much for this response!
I have the same phone, and I've been wanting to root it for a long time. There were so many pre-installed applications that are just hogging room, especially since I can't read Japanese well enough (yet).
-T
I hope it works for you too!
I spent probably the equivalent of 2-3 days searching over the last few weeks, but couldn't find anything that I was comfortable with trying.
This morning, I finally got the nerve up to try superoneclick and was really disappointed when it wouldn't work. Then I started trying all kinds of methods, and about 8 hours later finally came across the method that worked!
It's probably the only thing frustrating sometimes about having a Japanese phone: lack of English support!
Now I'm just hoping I don't break it! I'm backing up all the apps with Titanium backup before I start deleting them one by one. I would hate to delete something that is crucial to the system and not be able to restore it. I'm also looking into other ways to backup the system.
One word of warning. Your au one market will not work unless you do one more step. It's mentioned in English in the readme file. I didn't bother because I never download from it anyway. (Although, I probably should just so I'll keep getting updates on some of the J apps that I do have.)
Deleted
Deleted
the rootkit d/l has been removed. anyone know where to get it?
The File
I'm not sure if this is against the forum rules, but I have a copy of the zip file (well, a zipped up copy of the folder) from my computer. If you pm me, and I can send you it.
-T
■auto_rootkit_is04_v0.5+suhax
hotfile.com/dl/134084004/f59084e/auto_rootkit_is04_v0.5suhax.zip.html
link die;
anyone help me another link for that file & help me root this device step by step?
Thanks
The post above dissolution said they had one, but good luck getting a reply. I'm emailed twice and nothing.
私はローボーボブ。 Haro！！
Latest rootkit for FFK300
Here is the latest rootkit,
IS04 root toolkit ver 4.0.1
http://www1.axfc.net/uploader/Ne/so/131631
DL key ; is04
And other informations;
- Custom kernel(overclock, compcache, +others)
http://marijuana.ddo.jp/is01/index.php?moddir=downloads&action=visit&cid=9&lid=47
- Custom kernel(CWM on ramdisk, ported from Xperia, modUI)
http://www.mediafire.com/?jkz5nek59y3hpaf (reported kernel unstable)
# FFK301 stock ROM update - (rootkit does not work, still can be rooted.)
http://spf.fmworld.net/sw_update/kddi/is04/update/
- scroll to bottom and click on blue rectangle.
# kernel source code
http://spf.fmworld.net/oss/is04f/index.html
- some files are missing, extract them from T-01C(DoCoMo).
http://www.fmworld.net/product/phone/sp/android/develop/t-01c_froyo_oss/
help! rooting regza inquiry..
[/COLOR]
samkk75 said:
To answer my own question, in case any one else wants to know:
Okay... it looks like I cannot post external links... until I post 8 times, which I don't really predict doing... so I'm going to try just removing the http at the beginning and see if it will go.
Superoneclick v2.2 does NOT work with this phone. It gets through "Rooting device... Step #7" but cannot remount.
Unrevoked does not work.
Z4root also does not work.
But I found a Japanese site with directions that did work! YES!!
hibari.2ch.net/test/read.cgi/smartphone/1320415141/
Somewhere in the page was the following information and link:
■auto_rootkit_is04_v0.5+suhax
hotfile.com/dl/134084004/f59084e/auto_rootkit_is04_v0.5suhax.zip.html
I downloaded the zip file and extracted it. I clicked on adb.exe first and then clicked on the auto_rootkit_is04 batch file. I just hit enter after each step. (It's in Japanese, but all it says is each step it is doing and then to hit any key.)
The first time I ran it, it did not work. The second time, I turned my phone off and on again before trying anything, and bingo: I had root!
Some of the Japanese threads were saying something about the problem with superoneclick was that the is04 took too long to mount and so there was an error. At least, I think that's what it said. My Japanese is okay, but not always good enough for this type of stuff.
I hope this can help someone else.
Click to expand...
Click to collapse
hi!
I am a newbie here and like you all, I would also like to root my regza phone. Can someone give a working auto_rootkit because the link above is not working. I have searched it as well on the net but still all will lead me to dead hotfile link. Or someone could send me the file instead to my yahoo mail [email protected] tnx in advance
And also i have downloaded this rootkit instead from IS04 and downloaded. After dowloading, I click the adb file and it appears a command screen with commands running so fast. Next i did click the root file and there appeared a command screen with all sorts of command running so fast. My question is, i did not received any confirmation that the rooting process was succesfull. And also i have read to other forums that one thing you will notice that rooting was successfull is that 'superuser" will be automatically installed.
Please help me on this one. To be honest I started exploring this process since i have this phone and there are apps that i wanted to uninstall not unless i root the phone.
Thank you in advance
marvz,
Dissolution said:
I'm not sure if this is against the forum rules, but I have a copy of the zip file (well, a zipped up copy of the folder) from my computer. If you pm me, and I can send you it.
-T
Click to expand...
Click to collapse
hi there!
Can you send to my e-mail [email protected] the said file so that i could root my regza phone?
thank you for your help> ^_^
Question to get root on phone regza
samkk75 said:
To answer my own question, in case any one else wants to know:
Okay... it looks like I cannot post external links... until I post 8 times, which I don't really predict doing... so I'm going to try just removing the http at the beginning and see if it will go.
Superoneclick v2.2 does NOT work with this phone. It gets through "Rooting device... Step #7" but cannot remount.
Unrevoked does not work.
Z4root also does not work.
But I found a Japanese site with directions that did work! YES!!
hibari.2ch.net/test/read.cgi/smartphone/1320415141/
Somewhere in the page was the following information and link:
■auto_rootkit_is04_v0.5+suhax
hotfile.com/dl/134084004/f59084e/auto_rootkit_is04_v0.5suhax.zip.html
I downloaded the zip file and extracted it. I clicked on adb.exe first and then clicked on the auto_rootkit_is04 batch file. I just hit enter after each step. (It's in Japanese, but all it says is each step it is doing and then to hit any key.)
The first time I ran it, it did not work. The second time, I turned my phone off and on again before trying anything, and bingo: I had root!
Some of the Japanese threads were saying something about the problem with superoneclick was that the is04 took too long to mount and so there was an error. At least, I think that's what it said. My Japanese is okay, but not always good enough for this type of stuff.
I hope this can help someone else.
Click to expand...
Click to collapse
Hi
I have this phone too. And I try to get root, you can send for me the link of you downloaded and explain for me how you made it.
Other question, I can use this phone to call in brasil?
Thank you.
:good:
My phone just had this phone and I'm trying to update it before rooting. It came with 2.1-update 1 OS version and I'm trying to update the phone to it's latest official 2.2.2.
I've downloaded the necessary 256mb file update but it didn't work. Even tried using the recovery but is still not working.
Based on my research about this phone, There's no way to update without the phone downloading the app from the official website, using the SIM and au logins.
We've lost the sim (UIM) card that came with the phone. So I guess its stuck on its current OS. I'm having trouble installing apks (Gingerbreak and even normal apps) as it always gives me the error "parsing error" or something.
Is there anyone could help?
EDIT:
I have successfully updated the phone from Android 2.1-update1 to Android 2.2.2.
Download all the necessary files here:
http://www.fmworld.net/product/phone/is04/
I have used the method of updating from the least upgrade and up to the latest. I have managed to download 3 separate files for the upgrade, namely:
IS04_RC2_RC3RE_DL.zip
IS04_RC_4.zip
IS04_TO_SP_FYRC_4.zip <- froyo update
I have extracted all the files on the sd card. make sure that the ".enc" file is found on the root of the SD Card and on the "prg" folder.
I have updated it using the recovery mode (power + volume up + camera button).
I am now currently trying to Root the device using Gingerbreak and seems that it's taking too long to root.
Also. I have able to root the 2.1-update OS using z4root.
help me
hi.. i didn't my phone plz send me ...................................................auto_rootkit_is04_v0.5+suhax
hotfile.com/dl/134084004/f59084e/auto_rootkit_is04_v0.5suhax.zip.html
thnxx.. in advance..
Root
I rooted mine with http://unlockroot.com/
root_toolkit_is04_v4.3.zip
www1[dot]axfc[dot]net
/uploader/Ne/so/135399
Password is "is04".
suhax
www[dot]4shared[dot]com
/zip/pHLT8kqe/suhax.html
Sent from my IS04 using xda premium
more detail please
samkk75 said:
.....
I downloaded the zip file and extracted it. I clicked on adb.exe first and then clicked on the auto_rootkit_is04 batch file. I just hit enter after each step. (It's in Japanese, but all it says is each step it is doing and then to hit any key.)
The first time I ran it, it did not work. The second time, I turned my phone off and on again before trying anything, and bingo: I had root!
.....
.....
I hope this can help someone else.
Click to expand...
Click to collapse
Thx so much for your posts.
I am so glad to finally find someone with the same phone, the same problem and intentions
I do, however, need more info:
Did you extract the files into any particular folder? You obviously hooked up in de-bug mode, but did you command prompt anything?
I tried your steps but get nothing to 'hit enter' on. I have also tried the other (different version) toolkit.
You can IM me or email or post or come around and root my phone yourself - I will sell you my car, house, wife...
... as you can tell I am a little frustrated ...
lets just IM/email for now
Thx in advance,
Kaz
---------- Post added at 12:34 PM ---------- Previous post was at 12:29 PM ----------
orgia82 said:
I rooted mine with http:!!unlockroot*com/
Click to expand...
Click to collapse
Didn't get to try it - was too tied down with all the additional ^%$&#$ I had to download to get to it.
help
as everyone can see that link isnt working anymore,so im here asking someone whos still have it to upload :fingers-crossed: again．．．．
Related
I have spent days looking for threads so this neewb is about to break something. Well maybe not. I have my daughters Eris 2.1 and am trying to root it for her. I have tried several times with different methods. The issue is that I can get into recovery mode after every 1 click app but nothing I try will let me toggle to unzip to SD, or toggle to anything for that matter, volume wont do it and all track ball will do is let me select reboot. Man my DX was easy compared to the one click method.
HELP PLEASE,
If the trackball is having trouble scrolling, I'd install the trackball-optional custom recovery so you can use other buttons to scroll. There are instructions for doing this here:
http://androidforums.com/eris-all-things-root/214240-amon_ra-1-6-2-custom-recovery-trackball-not-required.html
It sounds like you fall into "Scenario 2" which says you should follow the same method as "Scenario 1" to get rooted using the trackball-optional recovery.
I'll give it a shot, The help is much appreciated,
I am been trying to help him to get this thing to add the Custom Recovery, but every root format has not worked at all. Most are outdated or there are files missing. Specially on the link provided above. The download for the scripts no longer has Root_1 or Root_2, it has a bunch of other stuff there for gscript. Found an link on Droidforums for gscript for rooting and the scripts don't work.
Any complete instructions anywhere?
popfan said:
I am been trying to help him to get this thing to add the Custom Recovery, but every root format has not worked at all. Most are outdated or there are files missing. Specially on the link provided above. The download for the scripts no longer has Root_1 or Root_2, it has a bunch of other stuff there for gscript. Found an link on Droidforums for gscript for rooting and the scripts don't work.
Any complete instructions anywhere?
Click to expand...
Click to collapse
popfan,
I am not aware that any of the above links or files are missing... Can you point-out / tell me specifically which files you cannot access / download / link-to?
The root_part1 and root_part2 files are part of erisuser1's (bftb0's) Universal Root for Dummies! thread that I do reference in my AF thread, but these should still be up, active, and available.
So, I'm not sure if you are speaking about becoming rooted or installing a my trackball-optional custom recovery.
Let us know.
Cheers!
Im sure my kid has shuned me for leaving her Eris with someone so thanks to everyone for the help. Pop is helping me out and after moving file at the point where it says to open and look to see root 1 and root2 they are not there and there are a ton of other stuff. Also the pick look different than on the thread like the app has been updated. Also when doing the ball recovery there is no tools folder to be found. I'm sure pop wont touch it again till tomorrow so any other help / advice is more than welcome or it may cost me my Dx
malloneem said:
Im sure my kid has shuned me for leaving her Eris with someone so thanks to everyone for the help. Pop is helping me out and after moving file at the point where it says to open and look to see root 1 and root2 they are not there and there are a ton of other stuff. Also the pick look different than on the thread like the app has been updated. Also when doing the ball recovery there is no tools folder to be found. I'm sure pop wont touch it again till tomorrow so any other help / advice is more than welcome or it may cost me my Dx
Click to expand...
Click to collapse
LOL, sorry, didn't make/see the connection between your two posts .
Okay, let's try something new here...
Just a week or so ago, I re-packed jcase's 1-click rooting app to include my trackball-optional recovery image in lieu of the original recovery that his app includes.
So, let's have you re-root using the new 1-click app (all credit to jcase, both for his app and his threads both here http://forum.xda-developers.com/showthread.php?t=742228 and over at AF http://androidforums.com/eris-all-things-root/139178-universal-1-click-eris-app-apk-no-pcs-no-scripts-needed-easy.html).
Since you've already used the 1-click app before, then all you'll have to do is grab my new "trackball-optional" version:
https://sites.google.com/site/scaryalienware/downloads/one-click-tbo.apk
MD5 sum: 15763b51cf707c027cc73bc117e1fc39
(the "tbo" in the name stands for "trackball optional" ).
Just follow the same process you did before while running the 1-click app and you should end-up with my trackball-optional recovery installed.
Let me know how it goes (you'll be the first besides me that I know of that has tried it; the user that I created it for to test has not yet responded, LOL).
Cheers!
I tried this link below. It no longer has the root_1 and root_2 in it.
http://www.megaupload.com/?d=774XYFRA
I did use your "updated" 1-click app with tbo and it worked great.
Thanks!!
Too bad this phone was not as easy as my captivate.
popfan said:
I tried this link below. It no longer has the root_1 and root_2 in it.
http://www.megaupload.com/?d=774XYFRA
I did use your "updated" 1-click app with tbo and it worked great.
Thanks!!
Too bad this phone was not as easy as my captivate.
Click to expand...
Click to collapse
Glad that jcase's repackaged app worked for you. I'll update my documentation to make this available to others.
Also, re. the above Megaupload link...it works just fine for me (from my PC and from my Droid X) and includes all of the aforementioned root_part1/2 files.
I think you've fallen prey to a truncated download, which is not uncommon with Megaupload in my experience. This is also why is important to double-check the file sizes and MD5 checksums of files that you download so that you know you got the whole-shebang; notice that erisuser1 did include the MD5 in his thread for this file:
- Download gscript.zip (MD5 92796a8c6e61e8f1ee36e315c0acae7d)
I've often found it helpful to use a different browser other than the stock browser (like Opera Mini) when doing downloads via my Eris since the stock browser does seem to have more issues (timeouts perhaps) than it should.
Cheers!
Thanks to all this tuff till you hooked us up but now on to nightmare 2
I downloaded CyanogenMod7.1.0 RC1 [2.3.5 GingerBread NIGHTLY]
from this thread http://forum.xda-developers.com/showthread.php?t=944430&highlight=ROM
Got it up but it has no market so I can not get to titanium, boot loader or anything... It says to flash google apps after the rom but now Im back to the trackball / volume key issue because it's all in titanium. ??? I did a factory reset and it came back up as the new ROM, ???
EDIT UPDATE!!!!
Sorry for the hassle all, the "green" start call button works as the down after the download.. All is well.. I think..
Again thanks to you all, If I hear of any good deals on an Eris I will know why.
You need to download GAPPS to your sdcard. That is why you don't have market.
http://forum.xda-developers.com/showthread.php?t=944430&highlight=ROM
Its just below link for the rom and save it to your sdcard. Go ahead boot into recovery and wipe data, daliv-cache, cache; Flash Rom again, then flash gapps and reboot.
Greeting,
It was heard that rooting T-01D are similar as F-05D.
I found a website regarding rooting F-05D, but I dont read Japanese, just want to know if anyone have tried the enclosed method to root T-01D?
or could anybody do the translation, since the terms become quite strange after using the online translators
The following link is ref. of rooting F-05D:
ttp://ayati.cocolog-nifty.com/blog/2012/01/f-05droot-1d0b.html
(should be "http" rather than "ttp")
The source code of T-01D have been provided also, but I have no idea how to use it and root the machine:
ttp://spf.fmworld.net/oss/t-01d/data/download.html
(should be "http" rather than "ttp")
Thank you very much in advance?
Update of 4/4
the following t-01d rooting procedures is provided by Magimaster
Hello.
I am sending this pm regarding the translation for flashing the Fujitsu f-05d sold by Docomo in Japan. I cannot reply in the development section due to my low post count.
My phone is an f-05d. I do not have a t-01d but, according to the original rooting guide for the f-05d, the users are reporting success in rooting the t-01d as well.
I will not really translate for you. Rather, I will explain what I did to root my f-05d.
Here is a rough summary of the steps I followed:
For starters, you need to make sure that adb recognizes your phone when connected to the PC via USB. This means that you need to install the Android SDK and the USB driver for your t-01d by Fujitsu.
I had trouble getting adb to recognize my phone, as Window$ insisted in recognizing it as an USB drive. What I did, among other things, was:
In the phone settings, go to Applications > Development and check USB Debigging and Stay awake.
Install the Google USB Driver package, in the extras section of the Android SDK Manager.
With the phone connected to the PC, go to Window$ device manager > Universal Serial Bus Controllers and uninstall (use the delete key from your the keyboard) every mass storage device that appeared when my phone was connected. Disconnect and reconnect the usb cable.
Only until I did this final step was my phone recognized and listed as Android Phone > Android Composite ADB Interface in the device manager. If your device is not recognized, you just cannot continue. Look for help about this, or else you cannot move on with this method of rooting.
Confirm that your phone is recognized as Android Phone > Android Composite ADB Interface in the Window$ device manager. Do not continue until it is.
From the Android SDK manager, install the package android sdk platform-tools.
You need download F05Droot.zip from the original blog page your linked before. I will not link to the file directly, but you should have no problem finding it. Extract the files within into the program directory \Android\android-sdk\platform-tools (this is my path).
You need to download a replacement for the file lsm_disabler.ko that is inside the F05Droot.zip. Get it from here and extract it an replace the one inside the platform-tools directory.
By the way, this platform-tools directory is the one that has the adb executable file. Just a heads up.
You need to download su. I cannot tell you where to get it. I just do not know where I got mine from, but was easy so go for it When you have it, extract it and put it in the platform-tools directory.
Confirm that the platform-tools directory includes these files:
Code:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
su
lsm_disabler.ko
f05dsu.bat
There will be more, but these are the ones needed for this to work.
Now, get ready to root. Connect your phone to the PC.
Go to your phone settings > setting my body > step/activity counter app > pedometer use and confirm it is checked on.
In the platform-tools directory, look for f05dsu.bat and run it. A DOS window will open. This is the funny part. Unless you are doing this from a Japanese version of Window$, or from a Window$ with Japanese locale active, you will see a lot of strange symbols instead of Japanese characters... which would be the same for almost anyone anyway Regardless, you will see a prompt to Press any key to continue . . .. At this point, you do not need to do anything on your phone, other than visually checking that the check mark on the pedometer is set.
On the DOS window press any key, your will see more garbage and another prompt to press any key. This is the important part. See if you can find among all those symbols this pattern: OFF/ON. If you do see it, it means we are on track.
Now that you were able to see the OFF/ON, go to your phone and uncheck the pedometer (OFF) and check it again (ON).
In the DOS window, press any key. Your phone will reboot. The message in the DOS window says that you must wait for the phone to boot up and for Window$ to recognize your usb connection to the phone.
When/if your phone is recognized by Window$, go to the DOS window and press any key.
Again, press any key and your phone will reboot.
The DOS window has a message indicating that you must now install superuser and busybox. When your phone reboots, go to the android market and install from there when you have the time.
You can now close the DOS window because, unless there was any error, you are now rooted, my friend
From the market, install a terminal, or an app that includes a terminal. I use Rom Toolbox because it has a terminal and scripts to mount the /system as rw.
Open whatever terminal you chose and, at the $ prompt type su
If new prompt is #, type soff
You will need to run these commands every time before trying to mount /system as rw.
That is all. I hope you can root your phone.
Just a petition, post this message in the forums, as it may help others who have similar difficulties. It sure could have helped me if someone had done before me.
Have a nice one and please forgive my English.
Click to expand...
Click to collapse
update 15/4
On 13/4 finally i got my phone rooted
I have to run f05droot.bat instead of f05dsu.bat
After I have run the f05dsu.bat, for the steps, no error popout.
then I open the terminal type su, it reply me "permission denied".
I know it is not successful, after several run, the situation still the same.
after that have checked the contents of f05droot.bat and f05dsu.bat.
They are very similar but the f05droot.bat will push the superuser and busybox into the device at the same time.
(so I added those files in the directory \Android\android-sdk\platform-tools )
Therefore, i tried that and its works finally.
I feel really exciting at that moment.
I hope this post can help they T-01d user to root the phone.
personally I really like this phone ^~^
the su file is also important
Anyone try it? Does it work?
I have got the source code from its web
But I dont know how to use that and lead me to root the machine
ttp://spf.fmworld.net/oss/t-01d/data/download.html
Can you post a review of this device?
redcarrot said:
Greeting,
It was heard that rooting T-01D are similar as F-05D.
I found a website regarding rooting F-05D, but I dont read Japanese, just want to know if anyone have tried the enclosed method to root T-01D?
or could anybody do the translation, since the terms become quite strange after using the online translators
The following link is ref. of rooting F-05D:
ttp://ayati.cocolog-nifty.com/blog/2012/01/f-05droot-1d0b.html
(should be "http" rather than "ttp")
The source code of T-01D have been provided also, but I have no idea how to use it and root the machine:
ttp://spf.fmworld.net/oss/t-01d/data/download.html
(should be "http" rather than "ttp")
Thank you very much in advance?
Click to expand...
Click to collapse
If you have time, can you please post a mini review of the device? I wanted to buy one too and I'm quite excited reading your review!
Thanks and more power!
Here is the mini review
Screen color is perfect except black and accurate. Speed is good in comparing with SGS2. Battery life is similar to SGS2. Form factor is better than SGS2. Camera is outstanding, thanks to the 1.3MP camera. Waterproofing design is what I like. The bad is upgrading is only possible in Japan. Digital TV is useless. Sound level is a bit low.
personally i like this phone very much especially the outlook.
my personal review is the following:
1. same as above the screen is perfect
2. the camera is also excellent
3. while you have a phone call, it change mode automatically depends on the environment
4. if i switch off all the data things, this phone can stand more than one day
(so i wont blame the battery, because I think we use too many network related stuffs)
5. i have to admit that the firmware is not quite stable (fortunately the phone can be upgrade to 4.0 after july)
for the rooting process, it seems like someone has success:
(i think that is temp root)
search "T-01D 軟解, tofu-keitai" in google (that is chinese unfortunately)
redcarrot said:
Greeting,
It was heard that rooting T-01D are similar as F-05D.
I found a website regarding rooting F-05D, but I dont read Japanese, just want to know if anyone have tried the enclosed method to root T-01D?
or could anybody do the translation, since the terms become quite strange after using the online translators
The following link is ref. of rooting F-05D:
ttp://ayati.cocolog-nifty.com/blog/2012/01/f-05droot-1d0b.html
(should be "http" rather than "ttp")
The source code of T-01D have been provided also, but I have no idea how to use it and root the machine:
ttp://spf.fmworld.net/oss/t-01d/data/download.html
(should be "http" rather than "ttp")
Thank you very much in advance?
Update of 4/4
the following t-01d rooting procedures is provided by Magimaster
Click to expand...
Click to collapse
It really work!~
I rooted my T-01D with this method!
And it's permanent root!!
Many thanks!~
hi HaoyuWen,
i have followed the steps, when i type su in the terminal simulator, it comes out segmentation fault su, do you have any idea.
I use titanium backup to check and it said my t-01d is not rooted.
for the pedometer on/off things, do i need to press the home key and go back to the pedometer to do the switch?
Thank you very much in advance
HaoyuWen said:
It really work!~
I rooted my T-01D with this method!
And it's permanent root!!
Many thanks!~
Click to expand...
Click to collapse
So both F-05D and T-01D can use this ?
yes, but i havnt got that work yet.
just want to know when I get the device rooted, will the device screen shows the device is rooted?
finally i got my phone rooted
you have to run f05droot.bat instead of f05dsu.bat
the su file is also important
redcarrot said:
yes, but i havnt got that work yet.
just want to know when I get the device rooted, will the device screen shows the device is rooted?
Click to expand...
Click to collapse
You can install a root checker to see
^ Please update it on the front page
Gonna get mine soon, so excited to hear this
wth_is_life said:
You can install a root checker to see
^ Please update it on the front page
Gonna get mine soon, so excited to hear this
Click to expand...
Click to collapse
I think I brick my T-01D. Don' know why, I do exactly the same what I have been told here... Now It ends up infinite boot loop
Anybody help me please?
Hey there everyone, sadly this guide isn't working for me. Everything in the guide goes smoothly and I do exactly what is listed but after my phone reboots the final time I still have no root access. I run f05droot.bat instead of f05dsu.bat like the user said but to no avail, I even ran f05dsu.bat and still nothing.
Anyone else have trouble? Maybe it is because I am on a certain FW? I am on 2.3.5
Baseband Version C_L1_M23
Kernel version: 2.6.35.7 [email protected] #1
and Build number is V43R41C
Just wondering as I really want root to disable all of these RAM-hogging default applications.
Bump? Anyone?
As far as I know, this rooting method cannot be done on FW V43R41C.
Sent from my SC-01D using Tapatalk 2
kinchung said:
As far as I know, this rooting method cannot be done on FW V43R41C.
Sent from my SC-01D using Tapatalk 2
Click to expand...
Click to collapse
Aw Thanks for the notice, of course it's my firmware. Any idea about ICS? It was supposed to come out in July but yeah..
I don't know about ICS for t-01d. My sc-01d has been already upgraded to ICS, the performance is improved a lot. sh-01d also gets ICS today.
Sent from my SC-01D using Tapatalk 2
kinchung said:
I don't know about ICS for t-01d. My sc-01d has been already upgraded to ICS, the performance is improved a lot. sh-01d also gets ICS today.
Sent from my SC-01D using Tapatalk 2
Click to expand...
Click to collapse
I see, I read about the T-01D (among many others) getting updated from articles like this: http://forums.hardwarezone.com.sg/e.../docomo-update-ics-4-0-18-models-3662812.html
I'm sure the T-01D would perform pretty awesome and maybe pre-installed software would not be as big a deal as it is now. Maybe since your SH-01D is getting updated, T-01D isn't far behind. The only thing I have to see is if I can update out of Japan.
I don't have sh-01d but galaxy tab 10.1 sc-01d instead. My t-01d also upgraded to V43R41C last month during visiting Japan. Upgrade of t-01d may not be possible outside Japan as Software Update cannot be executed without docomo sim and network.
Sent from my SC-01D using Tapatalk 2
Hi, I am newly registered user here who bought a 32GB Tablet S on the Woot deal the other day, long story short there is a question about the configuration of the Woot deal tablets over in the developer section, but since I am a new user with less than 10 messages posted, I can't answer there, so I am answering here in hopes someone will point them to this message, and it may be helpful for others:
About Tablet reads:
Android Version 3.2
Kernel version 2.6.36.3 [email protected]#1
Build number 1.10.001100001
On a side point I would like to ask if these are rootable from 3.2? and should I upgrade to 4.03, I have read some on lack of root access on these devices?
thanks
p.s. I am fairly new to Android, have a version 2.2 phone, but have been running Linux as my primary OS for over a decade
Isaac-1 said:
Hi, I am newly registered user here who bought a 32GB Tablet S on the Woot deal the other day, long story short there is a question about the configuration of the Woot deal tablets over in the developer section, but since I am a new user with less than 10 messages posted, I can't answer there, so I am answering here in hopes someone will point them to this message, and it may be helpful for others:
About Tablet reads:
Android Version 3.2
Kernel version 2.6.36.3 [email protected]#1
Build number 1.10.001100001
On a side point I would like to ask if these are rootable from 3.2? and should I upgrade to 4.03, I have read some on lack of root access on these devices?
thanks
p.s. I am fairly new to Android, have a version 2.2 phone, but have been running Linux as my primary OS for over a decade
Click to expand...
Click to collapse
Hey. Thanks I thknk that was me. I don't have min.e yet but I think from reading alone that you can pull a zip from an early ics build and root it using condi's aio method. Don't quote me... I also think that you cannot root it out of the box.. but ics should hav e a new kernel.
As a linux dude maybe you can help out with the dev on these things.... it seems to be needed.
I would wait for someone in the know about this process to answer.
Thanks...I really hbope I can root it. Custom roms would be nice but a root is almost a requirement for me.
Thanks agaain for the reply
Sent from my SPH-D700 using xda app-developers app
Isaac-1 said:
Hi, I am newly registered user here who bought a 32GB Tablet S on the Woot deal the other day, long story short there is a question about the configuration of the Woot deal tablets over in the developer section, but since I am a new user with less than 10 messages posted, I can't answer there, so I am answering here in hopes someone will point them to this message, and it may be helpful for others:
About Tablet reads:
Android Version 3.2
Kernel version 2.6.36.3 [email protected]#1
Build number 1.10.001100001
On a side point I would like to ask if these are rootable from 3.2? and should I upgrade to 4.03, I have read some on lack of root access on these devices?
thanks
p.s. I am fairly new to Android, have a version 2.2 phone, but have been running Linux as my primary OS for over a decade
Click to expand...
Click to collapse
The kernel being build 10 will probably cause a failure trying to root the 3.2 directly to 4.0.3. First, run Condi's All-in-One tool (use AiO v4.0, I believe v4.1 has a bug that Condi needs to fix) to pre-root and install a version of 3.2.1r2 with a kernel build that is less than 10 like THIS ONE or THIS ONE. Then run Condi's All-in-One tool again to pre-root and install version 4.0.3r1a. Remember to take your time and read slowly, carefully, and completely before using the AiO tool. Good luck. BTW, I also bought the same Woot deal (my second Sony Tablet S). It is scheduled to arrive Monday and I will be doing the same pre-root and install.
Thanks, by chance do you know if there is a step by step howto on the condi All-in-One tool that is not full of insider only alphabet soup acronyms, I think I get the concepts, but I also know messing up can create a fairly expensive paperwieght. I have googled a few sets of instructions, but they seem to all inlcude steps like before running AIO make sure your ABC or XYZ is up to date, this may be fine for people that have done this a dozen times, but for those of us going down this road for the first time we have no idea of what an ABC or XYZ is, or even what it stands for, much less how to find out if they are up to date. It also seems most of these instructions take steps for granted, saying things like "copy file onto an SD" with no further explanation, such as must it be an SD card or will SDHC work, is file name or directory structure important, etc. I am not so much looking for handholding here as just some confirmation that my assumptions may be right, even such things as if these tools should be downloaded onto a computer running windows or onto the Tablet itself. With the woot sale I suspect that there will be many more people here soon with these sorts of questions, and many will be completely clueless, at least I do have 25+ years of running Unix like operating systems, and have been using Linux as my primary OS since the 2.0 kernel days, and to tell the truth am rather lost in all these messages full of acronyms and short hand descriptions.
Ike
Isaac-1 said:
Thanks, by chance do you know if there is a step by step howto on the condi All-in-One tool that is not full of insider only alphabet soup acronyms, I think I get the concepts, but I also know messing up can create a fairly expensive paperwieght. I have googled a few sets of instructions, but they seem to all inlcude steps like before running AIO make sure your ABC or XYZ is up to date, this may be fine for people that have done this a dozen times, but for those of us going down this road for the first time we have no idea of what an ABC or XYZ is, or even what it stands for, much less how to find out if they are up to date. It also seems most of these instructions take steps for granted, saying things like "copy file onto an SD" with no further explanation, such as must it be an SD card or will SDHC work, is file name or directory structure important, etc. I am not so much looking for handholding here as just some confirmation that my assumptions may be right, even such things as if these tools should be downloaded onto a computer running windows or onto the Tablet itself. With the woot sale I suspect that there will be many more people here soon with these sorts of questions, and many will be completely clueless, at least I do have 25+ years of running Unix like operating systems, and have been using Linux as my primary OS since the 2.0 kernel days, and to tell the truth am rather lost in all these messages full of acronyms and short hand descriptions. Ike
Click to expand...
Click to collapse
In the thread that covers Condi's All-in-One tool, what you see is what you get. But to get a good gest of how to root the Sony Tablet S, I recommend you watch BluechipJ's VIDEO and read TheHurf's POST, which is the post BluechipJ was following in his video. I also recommend you watch the video and read the post several times before you actually attempt performing the root. Please note that the video and post are based on using All-in-One v2.7. Regarding "SD", a standard SD or SDHC card can be used, but it must be formatted FAT32. I used a SanDisk 32 GB SDHC card. Again, good luck.
Thanks, I found the videos last night, but not the message threads they were refering too. Together I am sure they will be most helpful
So I read the posts referenced earlier on, and I watched the video, but both start from a rootable ROM already on the tablet. Since the Woot ones come with 3.2 with the un-rootable kernel 10, I'm not sure how to do the intermediate step of getting the rootable 3.2.1 version on there?
The tablet is offering me an OTA update, but it says it's for 4.0.3 - it doesn't seem to give an option to go to an earlier version first. Does this mean that we're boned on these ones, or is there another way to get a rootable version on first?
It looks like the ALLinONE tool can't do anything for us unless we either root the tablet or make it rootable - am I missing something or looking at something the wrong way?
dmahon said:
So I read the posts referenced earlier on, and I watched the video, but both start from a rootable ROM already on the tablet. Since the Woot ones come with 3.2 with the un-rootable kernel 10, I'm not sure how to do the intermediate step of getting the rootable 3.2.1 version on there? The tablet is offering me an OTA update, but it says it's for 4.0.3 - it doesn't seem to give an option to go to an earlier version first. Does this mean that we're boned on these ones, or is there another way to get a rootable version on first? It looks like the ALLinONE tool can't do anything for us unless we either root the tablet or make it rootable - am I missing something or looking at something the wrong way?
Click to expand...
Click to collapse
If you want to have root access on your tablet, DO NOT ALLOW THE TABLET TO PERFORM AN OTA UPDATE.
First, download the 3.2.1r2 and 4.0.3r1a files from the previously given links and store them on your computer. Next, download and install on your computer Condi's All-in-One tool. The most popular versions seem to be 2.7, 3.4, and 4.0. The previously mentioned video and post are based on version 2.7.
Now manually update the 3.2 to 3.2.1r2; don't not attempt to root it yet. Just copy the 3.2.1r2 file to a SD card (formatted FAT32) and install the card in your tablet. Power off (not sleep mode) your tablet. Power on your tablet into recovery mode by continuously holding down the VOL+ button and momentarily pressing the POWER button. Release the VOL+ button after you see the recovery mode logo. From the recovery mode's menu, select 2 Update system from SD card. (VOL+ and VOL- buttons are used to navigate the menu, POWER button is used to select the highlighted selection.) From the next menu, choose and select the 3.2.1r2 file. Allow the manual update to complete.
After your tablet has been updated to 3.2.1r2, leave the copied 3.2.1r2 file on the SD card and use Condi's All-in-One tool to root and reinstall 3.2.1r2 by following the directions given in the previously mentioned video and post.
Finally, after 3.2.1r2 is rooted and installed, delete the 3.2.1r2 file from the SD card and copy the 4.0.3r1a file to the SD Card. Again use Condi's All-in-One tool to root and install 4.0.3r1a by again following the directions given in the previously mentioned video and post.
To summarize: first update 3.2 to 3.2.1r2, then root and reinstall 3.2.1r2, then lastly root and install 4.0.3r1a. Good luck.
Thanks! It was late last night, and I must have been in the wrong headspace to be trying this, because I woke up in the middle of the night and thought "Oh, I bet I have to put it in recovery and flash that file..."
After that, everything went pretty smoothly along, just as everyone said. A couple places where the process varied from what the ALLinONE tool seemed to expect (the _hack_recovery.zip file doesn't get pushed, or rather gets pushed as "install.zip," which I guess is supposed to make it auto-flash when you enter recovery, but on mine it didn't, so I copied _hack_recovery.zip over manually and ran it with the same results). Otherwise very smooth. Everything looks great.
Thanks!
Cat: your link above with the 3 files (THIS,THIS and version 4.0.3r1a) to donwload, seems to have an issue, specifically the link to version 4.0.3r1a goes to a file with the exact same name as one of the "THIS" files, maybe a different copy of the same file as the link is different. Before making a major mistake I wanted to confirm that "this" is correct.
Ike
p.s. one more detail, should the zip files be copied to the SD card still zipped, or should they be unzipped to the SD?
Isaac-1 said:
Cat: your link above with the 3 files (THIS,THIS and version 4.0.3r1a) to donwload, seems to have an issue, specifically the link to version 4.0.3r1a goes to a file with the exact same name as one of the "THIS" files, maybe a different copy of the same file as the link is different. Before making a major mistake I wanted to confirm that "this" is correct.
Ike
p.s. one more detail, should the zip files be copied to the SD card still zipped, or should they be unzipped to the SD?
Click to expand...
Click to collapse
I checked all the links. They are correct.
The first THIS ONE and the second THIS ONE are links to the same file stored at two different locations; that is why I wrote "or". Both files are signed-nbx03_001-ota-0042.001.zip, which is a rootable version of 3.2.1r2. The first was uploaded to 4shared by Condi, the second was uploaded to 4shared by me. I provided both links just in case one of us decides to delete our upload. After all, the files are eating up our allotted 4shared storage space, eh?
The link for the 4.0.3r1a file signed-nbx03_001-ota-120803002.zip links directly to Sony's servers.
The zip files are to be used as is. Do not unzip them. They are encrypted and signed files. If you attempt to unzip them using programs like 7zip or WinRAR, you will receive error messages saying the files are corrupted even though they are not corrupted.
Isaac-1 said:
Cat: your link above with the 3 files (THIS,THIS and version 4.0.3r1a) to donwload, seems to have an issue, specifically the link to version 4.0.3r1a goes to a file with the exact same name as one of the "THIS" files, maybe a different copy of the same file as the link is different. Before making a major mistake I wanted to confirm that "this" is correct.
Ike
p.s. one more detail, should the zip files be copied to the SD card still zipped, or should they be unzipped to the SD?
Click to expand...
Click to collapse
Brand new FAQ here will answer your question. You will prob need to flash 0035 then 0042 as you are 11000. Please refer to FAQ. It works.
Stifilz
stifilz said:
Brand new FAQ here will answer your question. You will prob need to flash 0035 then 0042 as you are 11000. Please refer to FAQ. It works.
Stifilz
Click to expand...
Click to collapse
Thank you for posting a much need FAQ.
A couple of hours ago, FedEx delivered my (second) Sony Tablet S from Woot. It is a model SGPT112US/S. About tablet says Android version 3.2, Kernel version 2.6.36.3 [email protected] #1, Build number 1.10.001100001.
Above, you state 11000 (I assume you mean Build number 1.10.001100001) must be updated to 0035 (version 3.2 file signed-nbx03_001-ota-0035.001.zip) before updating to 0042 (version 3.2.1r2 file signed-nbx03_001-ota-0042.001.zip). I am curious, please explain why 11000 cannot be directly updated to 0042? Why the need for the intermediate 0035 update?
Like i said in an ealier post, I planned on updating 3.2 to 3.2.1r2, then rooting and reinstalling 3.2.1r2, then rooting and installing 4.0.3r1a. Is my plan with error? Am I wrongly advising others to do the same?
Cat McGowan said:
Thank you for posting a much need FAQ.
A couple of hours ago, FedEx delivered my (second) Sony Tablet S from Woot. It is a model SGPT112US/S. About tablet says Android version 3.2, Kernel version 2.6.36.3 [email protected] #1, Build number 1.10.001100001.
Above, you state 11000 (I assume you mean Build number 1.10.001100001) must be updated to 0035 (version 3.2 file signed-nbx03_001-ota-0035.001.zip) before updating to 0042 (version 3.2.1r2 file signed-nbx03_001-ota-0042.001.zip). I am curious, please explain why 11000 cannot be directly updated to 0042? Why the need for the intermediate 0035 update?
Like i said in an ealier post, I planned on updating 3.2 to 3.2.1r2, then rooting and reinstalling 3.2.1r2, then rooting and installing 4.0.3r1a. Is my plan with error? Am I wrongly advising others to do the same?
Click to expand...
Click to collapse
Not too sure with US but have had a user woth Mexico and had to install 0035 3.2.1 before 0042 3.2.1r2 as installation would abort. If it works without 0035 than thats awesome but atleast the way I described It will 100% work :fingers-crossed:
I assume it must be done this way because 0035 is 3.2.1 and 0042 is 3.2.1R2???
Check thread below posts 60 thorugh to 69.
http://forum.xda-developers.com/showthread.php?t=1687429&page=7
Thanks
Stifilz
stifilz said:
Not too sure with US but have had a user woth Mexico and had to install 0035 3.2.1 before 0042 3.2.1r2 as installation would abort. If it works without 0035 than thats awesome but atleast the way I described It will 100% work :fingers-crossed:
I assume it must be done this way because 0035 is 3.2.1 and 0042 is 3.2.1R2???
Check thread below posts 60 thorugh to 69.
http://forum.xda-developers.com/showthread.php?t=1687429&page=7
Thanks
Stifilz
Click to expand...
Click to collapse
No, thank you! I will change my plan to first updating with 3.2.1 file signed-nbx03_001-ota-0035.001.zip.
Cat McGowan said:
No, thank you! I will change my plan to first updating with 3.2.1 file signed-nbx03_001-ota-0035.001.zip.
Click to expand...
Click to collapse
OK........ WTF?? I was meaning if you wanted proof for the reason I suggest this method (0035 > 0042) then look at that thread. I was not implying you were a noob and needed to follow a step-by-step.
Stifilz
stifilz said:
OK........ WTF?? I was meaning if you wanted proof for the reason I suggest this method (0035 > 0042) then look at that thread. I was not implying you were a noob and needed to follow a step-by-step.
Stifilz
Click to expand...
Click to collapse
You seem to have misunderstood my reply to you. You said "Thank you" to me and I replied "No, thank you!" to you meaning that no, you should not be thanking me; instead, I should be thanking you. I hope I have cleared up the confusion.
Cat McGowan said:
You seem to have misunderstood my reply to you. You said "Thank you" to me and I replied "No, thank you!" to you meaning that no, you should not be thanking me; instead, I should be thanking you. I hope I have cleared up the confusion.
Click to expand...
Click to collapse
LOL, I get it now. Haha gotta love forum confusion . Anyway you may have been right aswell, over on FAQ thread, a US user managed to get by without flashing the 0035 inbetween....... Yet the Mexican region's update needed the 0035 inbetween. But I guess there is only 1 way to find out......
Stifilz
I recently recieved a Double Power M975 9" tablet as a gift. I have been unable to find any information regarding rooting this tablet.
I am not a total n00b, but rooting is not my forte. I can follow instructions and make logical connections well enough to do a root, but I am honestly at a loss for how to root this thing.
I don't know what all information is required for someone smarter than I to figure it out and relay the steps, but here's the basic info of the Tablet.
Double Power M975 (aka DOPO)
Android Version 4.04
Kernel 3.08+ (also says [email protected] #99, dunno if that's important)
Build Number A9 v01b
Internal Storage is 0.98Gb, with NAND Flash of 5.27Gb, and I have a 32Gb Micro SD card in it.
9" Screen
If anyone knows how to root this thing, or if you need more info, please let me know below.
Thanks in advance.
Im having the same problem man
No123abc said:
Im having the same problem man
Click to expand...
Click to collapse
I'm actually surprised there isn't more info or already a guide for this specific tablet, as it's available at Walmart and online, it's cheap and is the best option in its price range for size and the fact that is has Google Play pre installed. It's not a powerhouse, to be sure, but it has been around long enough that I thought someone would know how to root it already. I just wish I knew enough about rooting Android to figure it out myself.
bump
I'm still not having any luck finding any info on rooting this specific device, or even generic root for 4.04.
blackholepcs said:
bump
I'm still not having any luck finding any info on rooting this specific device, or even generic root for 4.04.
Click to expand...
Click to collapse
Was in the same boat as you, so did some poking around the past few days. Just managed to root my Double Power M-975.
First problem was getting ADB drivers installed for the tablet. I found baudi's pdf that did it for me (attached below). Followed that, until the actual rooting at the end. To root, I used SferaDev's Root Rk29 Toolkit (also attached).
Hope this works for you too!
coldpint said:
Was in the same boat as you, so did some poking around the past few days. Just managed to root my Double Power M-975.
First problem was getting ADB drivers installed for the tablet. I found baudi's pdf that did it for me (attached below). Followed that, until the actual rooting at the end. To root, I used SferaDev's Root Rk29 Toolkit (also attached).
Hope this works for you too!
Click to expand...
Click to collapse
DUDE!!! Thank you so much! It totally worked!
For anyone who reads this, know that the linked .pdf is out of date. The majority of it is still valid, however the adb_usb.ini file does not exist. You will have to manually create it in the listed location (make sure to remove the .txt extension and make it an .ini) and the sdk manager file does not exist. You can access the sdk manager through eclipse.exe in the Eclipse folder.
coldpint said:
Was in the same boat as you, so did some poking around the past few days. Just managed to root my Double Power M-975.
First problem was getting ADB drivers installed for the tablet. I found baudi's pdf that did it for me (attached below). Followed that, until the actual rooting at the end. To root, I used SferaDev's Root Rk29 Toolkit (also attached).
Hope this works for you too!
Click to expand...
Click to collapse
This worked great! Thank you!! Now I have to figure out how to make a custom rom...
---------- Post added at 10:13 PM ---------- Previous post was at 10:08 PM ----------
blackholepcs said:
DUDE!!! Thank you so much! It totally worked!
For anyone who reads this, know that the linked .pdf is out of date. The majority of it is still valid, however the adb_usb.ini file does not exist. You will have to manually create it in the listed location (make sure to remove the .txt extension and make it an .ini) and the sdk manager file does not exist. You can access the sdk manager through eclipse.exe in the Eclipse folder.
Click to expand...
Click to collapse
You must have downloaded the ADT Bundle. I did too the first time.
On the Android SDK website if you click "Download for other platforms" then under "SDK tools only" select the zip file for windows you will get the package referred to in the pdf.
I also had to go into device manager and manually update the driver via the method described in the pdf.
The more you know...
Okay so how come I'm the only one not having any luck with this? I'm new to the whole rooting thing BTW...
DanaDizane said:
Okay so how come I'm the only one not having any luck with this? I'm new to the whole rooting thing BTW...
Click to expand...
Click to collapse
What exactly are you having issues with? Are you getting errors? Can't download something? Be specific. The more information you give the better we can help you. Write a story if you need to.
Sent from my SPH-D710 using xda app-developers app
Anyone Know how to get CWM?
Thanks a bunch!
coldpint said:
Was in the same boat as you, so did some poking around the past few days. Just managed to root my Double Power M-975.
First problem was getting ADB drivers installed for the tablet. I found baudi's pdf that did it for me (attached below). Followed that, until the actual rooting at the end. To root, I used SferaDev's Root Rk29 Toolkit (also attached).
Hope this works for you too!
Click to expand...
Click to collapse
Thanks so much for sharing this information! I just got my tablet today and I'm about to try this. My daughter has the 7" inch tablet by dopo and I'd like to find info. on how to root hers too. I've looked for months for this info. since we got hers.
Whew hoo! One thing's for sure, I can always come here to get the best android resources!
for ADB USB drivers for your computer, download: pdanet+
I was having problems with loading Android ADB USB drivers on my computer by way of methods found for this post but found that USB drivers loaded correctly when I installed PDAnet+ for the computer. So if you are having problems installing Android ADB USB drivers give pdanet+ a try
dopo M975 Root!!!!
root unlock software free from web i used it took me about 30 secs to root still having prob with custom rom so if anybody has any ideas that would be great. download free run plug tablet in and hit root. unlockroot.com
another option for root
root rk29 tab toolkit 1.3 google it already on xda
Problem with .ini file
coldpint said:
Was in the same boat as you, so did some poking around the past few days. Just managed to root my Double Power M-975.
First problem was getting ADB drivers installed for the tablet. I found baudi's pdf that did it for me (attached below). Followed that, until the actual rooting at the end. To root, I used SferaDev's Root Rk29 Toolkit (also attached).
Hope this works for you too!
Click to expand...
Click to collapse
Hi, I know u posted a while back. I tried this on my M975, but my PC doesn't install the driver; it says incorrect line on INI file . Would u be willing to post your INI so I can see if we got the same format? Also, could u please explain how u used the root kit to actually root? Thnx.
Hey all.
I have a DOPO EM63 7" tab, and I'd like to share how I rooted it. I figure most of the DOPO devices will be the same.
1.) Install JDK, Android SDK (the zip file {choose download for other platforms}) and do everything else in steps 1-12 from the pdf in this thread.
2.) Go here (xda link) and do steps 2-11
3.) Laugh about how easy it was.
If anyone can't look at the pdf and other thread, I can post full steps.
It works. Out of every method I've tried, this one worked.
I have to add, some steps are outdated (ie. Step 7 from the link: just click "Root" on the pc screen)
And yes, the program is in Chinese - but it is easily understood (everything you need is in English)
Also, I don't know if the Moborobo program is necessary (seeing as we have drivers already) but it doesn't hurt to use it anyway.
orangeisnon said:
Hey all.
I have a DOPO EM63 7" tab, and I'd like to share how I rooted it. I figure most of the DOPO devices will be the same.
1.) Install JDK, Android SDK (the zip file {choose download for other platforms}) and do everything else in steps 1-12 from the pdf in this thread.
2.) Go here (xda link) and do steps 2-11
3.) Laugh about how easy it was.
If anyone can't look at the pdf and other thread, I can post full steps.
It works. Out of every method I've tried, this one worked.
I have to add, some steps are outdated (ie. Step 7 from the link: just click "Root" on the pc screen)
And yes, the program is in Chinese - but it is easily understood (everything you need is in English)
Also, I don't know if the Moborobo program is necessary (seeing as we have drivers already) but it doesn't hurt to use it anyway.
Click to expand...
Click to collapse
Has anyone found a customs recovery for these dopo tablets or Roms? The 7" I got my Lil one last yr from walmart was rooted out of the box.
i got a m980 model and for some reason every time i turn off and on start with Chinese letter and need be configured again any idea?
orangeisnon said:
Hey all.
I have a DOPO EM63 7" tab, and I'd like to share how I rooted it. I figure most of the DOPO devices will be the same.
1.) Install JDK, Android SDK (the zip file {choose download for other platforms}) and do everything else in steps 1-12 from the pdf in this thread.
2.) Go here (xda link) and do steps 2-11
3.) Laugh about how easy it was.
If anyone can't look at the pdf and other thread, I can post full steps.
It works. Out of every method I've tried, this one worked.
I have to add, some steps are outdated (ie. Step 7 from the link: just click "Root" on the pc screen)
And yes, the program is in Chinese - but it is easily understood (everything you need is in English)
Also, I don't know if the Moborobo program is necessary (seeing as we have drivers already) but it doesn't hurt to use it anyway.
Click to expand...
Click to collapse
I get to the step where I press root on the comp while it's open on my computer, an the program crashes and I fail to get root.....any clue?
EDIT: For those of you with a DOPO em63. It took a lot of research and digging, but I found an app called RootGenius. Very simple program, I ran it and it worked.
Here is the post, it's here on xda http://forum.xda-developers.com/gen...uble-power-em63-7-4-2-2-t2811412/post54045765.
Oh happy day!
cstryon said:
EDIT: For those of you with a DOPO em63. It took a lot of research and digging, but I found an app called RootGenius. Very simple program, I ran it and it worked.
Here is the post, it's here on xda http://forum.xda-developers.com/gen...uble-power-em63-7-4-2-2-t2811412/post54045765.
Oh happy day!
Click to expand...
Click to collapse
That's awesome! I actually cracked mine (a single tear rolls down my cheek) but a relative gave me hers, which is an identical model (tear dries up instantly), so I'll try this as soon as I can. Will let you all know what happens.
I'll check my build, too.
Thanks for the info!
EDIT: Please make that your signature ("Oh happy day!"). That would make me very happy.
Anyone know how to root a Sharp SH-02E (ICS 4.0.4)? Even a temporary root is fine, I only want to install a particular apk in /system/app.
Many thanks.
I am looking for the Sharp Aquos Zeta root also, not for me but for my friend
I'll subscribe here and repost if I find something somewhere else.
Try this
http://forum.xda-developers.com/showthread.php?t=1886460
:thumbup:
DPK
Sent from my Android Smartphone
dkmali said:
Try this
http://forum.xda-developers.com/showthread.php?t=1886460
:thumbup:
DPK
Sent from my Android Smartphone
Click to expand...
Click to collapse
Tried and failed.
There's a discussion on a Japanese BBS that I think is onto something. Unfortunately there's a stupid rule here that means I can't post a link to it. The page title is '【ROM焼き】docomo AQUOS PHONE ZETA SH-02E root1' and it should be the top result on Google for 'sh-02e root'. The fun starts at post 75.
If we can just get ROOT and Custom Recovery on this device - it simply becomes the most powerful and advanced communicator in the world.. However no root - no life..
Two things:
Any luck with a custom recovery yet?
And can anyone dump the kernel and stock rom?
Happy to give it a crack...
Sent from my SPH-L900 using Tapatalk 2
Updating Aquos Phone
jaseli said:
Tried and failed.
Click to expand...
Click to collapse
Did you manage to get update 01.00.05 anyhow flashed outside Japan?
http://www.nttdocomo.co.jp/support/utilization/product_update/list/sh02e/index.html
jauhien said:
Did you manage to get update 01.00.05 anyhow flashed outside Japan?
http://www.nttdocomo.co.jp/support/utilization/product_update/list/sh02e/index.html
Click to expand...
Click to collapse
it is currently impossible to upgrade this phone out of Japan.
i am still on 01.00.03
I have a sh203 and I would like to root my phone also
>_<
Arrgh, this is so frustrating. You look on the 2ch thread and you can see they've done it. Temp root, MIYABI permanent root, they've done it all. The instructions aren't too hard to follow but I cannot for the life of me find the password (キーワード) required to download the files from axfc.net. If I had those files I could root the phone and post a guide here in English. For goodness sake it's staring me right there in the face and there's not a thing I can do about it. And of course because this is XDA, I can't even post you a link to the thread. It's the same thread title as earlier. You want to start from post 542 onwards, if you want a try yourself.
WithLoveFromExIA said:
Arrgh, this is so frustrating. You look on the 2ch thread and you can see they've done it. Temp root, MIYABI permanent root, they've done it all. The instructions aren't too hard to follow but I cannot for the life of me find the password (キーワード) required to download the files from axfc.net. If I had those files I could root the phone and post a guide here in English. For goodness sake it's staring me right there in the face and there's not a thing I can do about it. And of course because this is XDA, I can't even post you a link to the thread. It's the same thread title as earlier. You want to start from post 542 onwards, if you want a try yourself.
Click to expand...
Click to collapse
yes , please guide me how to root the phone permantly , thanks a lot !!
OK I've made some progress. I've got a temporary root, and am three hex numbers away from a full root. You'll need
The Sharp USB drivers, that are on Sharp's developer site.
ADB, as usual
The guide itself, which I can't like to. Post 672 on the 2ch thread.
The extra files, likewise. Post 680.
.
It's well written and pretty straightforward. Only minimal use of Google Translate will be necessary.
In the guide you'll find three lines of the form
Code:
./acdbwritevalue <address> <value>
where <address> and <value> are hexadecimal numbers.
The problem is that the guide is written for build number 01.00.05, the latest one. Unfortunetely I'm stuck on 01.00.03, so while the <value> numbers are the same, the <address> numbers are differrent, and I need to find the right ones. If you're on 01.00.05 feel free to go through the guide and share your results. Alternatively, if you know how to force the phone to update without being in Japan on Docomo, please share that too.
WithLoveFromExIA said:
OK I've made some progress. I've got a temporary root, and am three hex numbers away from a full root. You'll need
The Sharp USB drivers, that are on Sharp's developer site.
ADB, as usual
The guide itself, which I can't like to. Post 672 on the 2ch thread.
The extra files, likewise. Post 680.
.
It's well written and pretty straightforward. Only minimal use of Google Translate will be necessary.
In the guide you'll find three lines of the form
Code:
./acdbwritevalue <address> <value>
where <address> and <value> are hexadecimal numbers.
The problem is that the guide is written for build number 01.00.05, the latest one. Unfortunetely I'm stuck on 01.00.03, so while the <value> numbers are the same, the <address> numbers are differrent, and I need to find the right ones. If you're on 01.00.05 feel free to go through the guide and share your results. Alternatively, if you know how to force the phone to update without being in Japan on Docomo, please share that too.
Click to expand...
Click to collapse
Although I haven't got SH02E, I have found some extra files, which was mentioned in the Japanese guide for root, expect Busybox, enjoy.
The best phone of 2013 on the worse company in the world
Tommi_Vercetti said:
Although I haven't got SH02E, I have found some extra files, which was mentioned in the Japanese guide for root, expect Busybox, enjoy.
Click to expand...
Click to collapse
Thanks a lot. Luckily I came to Japan for Vacation and was able to find someone else to lend me a Usim card to update. DoCoMo are worse than Motorola, Apple and ATT when it comes to restricting your phone. Hell, I can't even use the native FM function without DoCoMo. How can Sharp expect to come out of the hole of bankruptcy when doing this sort of business? Look at the crappy Samsung company. Awful phones that everyone buys because they decided to be "untied" to companies at the beginning and for that reason they owned the market.
If Japan is really serious into getting its technological market back, better start uncopying the USA practice of enslaving their phones and tablets to telecomunication companies.
It's a shame that the best phone right now, the Sharp Aquos Zeta Sh-02e, with its awesome new screen and specs, is going to the trash as if it was a failure, just because they don't make deals with companies outside Japan.
16MPixel CAMERA!!! IGZO ultra clear screen!!! Quad Core!! 2gb Ram!! all the specs of all the other phones plus like 30 that none of them have!! A total shame, Sharp!
Find it carefully and you will find a good guy have written a script for temp root, I used the script to have my SH-02E rooted.
And, as far as I can read the topic, the unlock file is for NAND crack and may write to recovery area.
I don't test that coz of warranty, the reason I want to root is to put some message backup back(something like LINE) and remote control (VNC server for example)
And, yes, you can find the temp root solution for both 1.0.4 and 1.0.5, but no 1.0.3, good luck!
Do you have some files for rooting sh02e 1.00.04
rotalume said:
Find it carefully and you will find a good guy have written a script for temp root, I used the script to have my SH-02E rooted.
And, as far as I can read the topic, the unlock file is for NAND crack and may write to recovery area.
I don't test that coz of warranty, the reason I want to root is to put some message backup back(something like LINE) and remote control (VNC server for example)
And, yes, you can find the temp root solution for both 1.0.4 and 1.0.5, but no 1.0.3, good luck!
Click to expand...
Click to collapse
Do you have some files for rooting sh02e 1.00.04, I think many guys here are needing the solution
Hi rotalume
thanks for the note... can i ask a favor? i really need some help to install the SH-02E driver in windows.
tried to download the file from sharp's web, but after executing the install exe file, a bundle of unreadable signs come out, and i check my device manager, there is not SH-02E USB handler or SH-02E modem. I just want to make use of Helium (backup) to extract / restore apps and data...
thank you for your help in advance.
P.S. I guess to get the temp root script pushed to SH-02E, this driver is essential as well.
thanks again
jaseli said:
Hi rotalume
thanks for the note... can i ask a favor? i really need some help to install the SH-02E driver in windows.
tried to download the file from sharp's web, but after executing the install exe file, a bundle of unreadable signs come out, and i check my device manager, there is not SH-02E USB handler or SH-02E modem. I just want to make use of Helium (backup) to extract / restore apps and data...
thank you for your help in advance.
P.S. I guess to get the temp root script pushed to SH-02E, this driver is essential as well.
thanks again
Click to expand...
Click to collapse
The one you've installed is not ADB Driver, check ADB driver at developer site(I'm to young to post a link )
File name will be given as this form : usb_driver_SHARP_r6.10.zip
Download and extract, then install the driver by device manager.
And, I've used Carbon before but in vain coz of ADB driver(the author had told me), I don't know if this issue has been solved.
For the files, sorry guys, I've found someone at other forums has used them for commercial purpose(it's a shame that ppl of my country is included), so the best I can give is to tell you the clue.
You can post your question and I will do my best, but no file will be provided atm.
Downloaded Sharp Aquos Zeta ADB drivers for SH-02E
rotalume said:
File name will be given as this form : usb_driver_SHARP_r6.10.zip
Click to expand...
Click to collapse
I was able to find and download that driver by just selecting the name you wrote and making a search on Googl. It was the very first result. thanks a lot. Although I would love the name of the script or the title of the page you downloaded it from.
Thanks a lot.