Hey everybody-
I'm new to the forums, so welcome all.
I recently purchased the Trident Aegis case for my HTC Flyer. My regular phone is an HTC EVO 4G, and I have the Otterbox Defender for that, and the make-up is fairly similar in the composition of them, which I like. I'm the kind of guy that sticks to OEM stuff, to keep things simple and clean.
Anyways, I travel a lot, and I always throw my tablet in my bag for commuting. Unfortunately, even though it has the case, I'd still like a neoprene sleeve for it while it's being jostled around in a bag for a few hours at a time.
I guess beggars shouldn't be choosers on this one, seeing as the Aegis case does a wonderful job already, but does anybody have any suggestions on this one? I'm not looking to get a generic case for an ipad as that's sort of too bulky for me.
This perhaps:
http://www.bodyguardz.com/universal-tablet-sleeve-protection-cases-covers-sleeves-shield.html
I was considering buying it, but when I saw it was as big for 10" tablets, I decided not to get it.
and I don't know why they call it "universal". They should have just called it an iPad sleeve.
Edit:
Here are some others I found:
These looks like the only few that may be big enough to accommodate the flyer with the case on it. Just measure yours and see if it is suitable.
http://www.amazon.com/GTMax-Neopren...?s=electronics&ie=UTF8&qid=1321508537&sr=1-12
http://www.amazon.com/Kroo-Neoprene...2?s=electronics&ie=UTF8&qid=1321508604&sr=1-2
Also, I have an Aegis case just lying around and I'm not using it for a similar reason to why you want a case. If you do get a case, please let me know which one so that I may switch to using the Aegis, as I'm sure it will provide better protection vs the current folio case I'm using.
Related
When are they going to come out with some after market sleeves/cases???? I want to spend some money but no one wants to take it. Company's new the TF was coming out for months.
well the short answer is that there aren't any "official" cases for the TF other than the Asus produced sleeve case. after reading reviews and hands-on impressions, i think the case is way overpriced and not all that great. if they charged $15 or $20 for the case, i think more would buy it.
that being said, check this thread a few posts down for the list of compatible cases. i'm in the same boat in that my TF is actually being delivered today and i wont have a case for it. i'm debating on going to walmart or BB or something and just getting a zippered sleeve netbook case just to hold me over until something better comes out. i'll be walking around with the tablet and really fearful of scratching it or dropping it
Well, there are no official ones but other vendors are starting to put transformer in the title of their products as sign of compatibility?
Like this from CaseCrown:
http://www.amazon.com/gp/product/B0...17145&creative=399349&creativeASIN=B004T655OW
Or if you prefer multi-pocket messenger bag
http://www.amazon.com/gp/product/B0...17145&creative=399349&creativeASIN=B004WPPBI0
Or GizmoDorks hard shell EVA case
http://www.amazon.com/gp/product/B0...17145&creative=399349&creativeASIN=B004Y214XC
Any cheap case for a 10" netbook will fit fine ;P
well i'm really wanting a portfolio case as i will be using my TF mainly for work purposes at the office. my company bought me one to use, so im wanting to carry this thing to meetings and what not...and i dont want to use a messenger bag thingy to do it.
Check out the cases thread. Lots of price ranges.
http://forum.xda-developers.com/showthread.php?t=1060872
Gbcue said:
Check out the cases thread. Lots of price ranges.
http://forum.xda-developers.com/showthread.php?t=1060872
Click to expand...
Click to collapse
yeah i posted there on the last page asking for tips on the kindle dx cases but havent heard from anyone yet. i think im just going to buy a netbook sleeve/zipper case, and then when a true folio case comes out for the TF, i'll just take my netbook sleeve back to the store and return it.
thegrumpyyoungman said:
well i'm really wanting a portfolio case as i will be using my TF mainly for work purposes at the office. my company bought me one to use, so im wanting to carry this thing to meetings and what not...and i dont want to use a messenger bag thingy to do it.
Click to expand...
Click to collapse
Currently the only folio-type case is the official Asus case. It's a mixed bag -- functionally, it's perfect, exactly what you want from a tablet case. However, it is pricey, and doesn't appear to be built from $40 worth of materials But, it's all we have right now as far as cases built specifically for the TF.
im in the similar situation as someone above.
my TF is delivered today, but i dont have any protection for it. Might just run to Ross and see if i score on a netbook pouch.
what id really like is a silicone skin to guard the back of the unit and a screen shield..
i can then just store it in a case/pouch
I am hoping there are some people here who know about what brands/sites are good ones or trustworthy.
Ok, picking up my Evo 3D on Friday..... and surprise surprise, the phone isn't even out yet, yet there are a million different places with brands nobody has ever heard of with supposed cases for this phone, some of them even having dimensions smaller than the phone itself despite being listed as for the 3D.... (Yes I know, no need to tell me many manufacturers will take existing stock and claim it works for the new device just to sell it).
So the thing is, I have no idea what cases might be designed specifically for the HTC Evo 3D, or even any respectable sites to buy such cases from.
But I am also sorta over-complicating the issue by not being sure if I should first over a back cover for the phone or not. See, I am not a fan of the way the camerapod sticks out, I was wondering if there were any GOOD cases that add enough bulk to essentially make the cameras level with the rest of the phone, even if this will add thickness.
Something like this, but I don't know if this really is an official HTC product or not, and if there aren't better ones (or if that is a trustworthy site):
http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=28040
And this brings me to my main concern. The main case I want to get is a belt-clip holster, not just a simple little clip that attaches the phone to your belt but basically a whole pouch to hold it, something like this:
http://www.amazon.com/Black-Horizontal-Leather-Magnetic-Closing/dp/B0051IGCAI
But on top of the problem I already mentioned of there being a million cases just simply calling themselves a HTC Evo 3D case... there is also the issue of how it will fit. Normally, I don't care if a case is a little too big for a phone since it will hold it anyway, but all of my previous phones didn't have sensitive parts like the camera sticking out so much before, if I were to get a case, id want one designed to hold the pushed-out camera in place too.... but that would only work if I decide not to get a case that ads bulk for the purpose of keeping the cameras flush with the back of the phone.... and if I do decide to go with a back-cover to add bulk, will those pouch-cases then even still hold the phone or will it then be too thick?
Sigh... I'm over-complicating things aren't I? So anyway, any ideas? Its a shame those back-covers that increase the size of the phone can't make use of that size, such as storing a slightly higher capacity battery or something.
That first one's badass. I wonder how much coverage you get on the front. I ordered two slide together ones (like the innocase surface, but a clone), and one super-silicone one. I like buying a bunch of different colored cases to shake things up every now and then.
ey
retnuh730 said:
That first one's badass. I wonder how much coverage you get on the front. I ordered two slide together ones (like the innocase surface, but a clone), and one super-silicone one. I like buying a bunch of different colored cases to shake things up every now and then.
Click to expand...
Click to collapse
post some links so we can see what they look like plz i still need case
http://www.amazon.com/gp/product/B0053NWDO0
This is the silicone one. Cheap and highly rated for other phones.
http://www.amazon.com/gp/product/B0052TTMXA
This is the snap together (innocase surface-esque) one. Might be sold out now.
where is the case with the kickstand?
I went yesterday to a sprint store and got me a otterbox commuter case. I love it. They had about 4 different kinds but none with a kickstand. They also had the car dock as well.
TPU case for me. Ordered a few weeks ago from ebay, $4 shipped.
picked up a chase from BB this morning belt clip
case 20
screen protector was free
Are there images of any of these cases?
Cyber Akuma said:
Are there images of any of these cases?
Click to expand...
Click to collapse
case i have
http://www.bestbuy.com/site/olspage...d=1218353393109&viewtype=largeFrontView&h=387
but with out the kickstand
Picked up a Body Glove hard case when I picked my 3vo up this morning. Doesnt add too much bulk
Sent from my PG86100 using XDA Premium App
I got the case that Best Buy sells with a kick stand. It's 2-piece, kickstand, soft-touch, protects well. Very streamline. It costs too much ($40.00) but I had some reward points and ended up getting it for free. Love it!
Hmph, just terrific. To complicate matters, that hardshell case I posted isn't even available until July 13 apparently.... and nobody is showing that it looks like from the front...
I guess I should just at the minimum get a belt-clip pouch for now. Does anyone know of any good horizontal ones that were specifically designed for the Evo 3D instead of just general cases that roughly fit a phone of that shape?
Hi guys,
I never bought a case for my HTC Hero, and regretted it later as it got scratched by my keys when I run or when I have the phone in the pocket. I do not know much about cases, but I want something good that gives good protection, so I decided to ask around.
Ideally, I would like two cases. I used to have a creative Zen for those of you know know it, and it came with an arm band it was awesome for running. I would love to have something similar for my EVO for running. It's a huge phone and carrying it in my pocket while running long distances is not really ideal.. Any suggestions? The Sprint people suggest I will get one of the Ipod cases but I doubt any of them will fit.. anyone with experience? Besides running, a normal case that protects it in the pocket would be nice. This one can be cheaper as long as it does the job.
I do not think I need screen protectors if to judge from the Hero, but let me know what you think. Thanks!
http://www.cellphoneshop.net/hd2armband.html
Here's an armband that would work. I'm going to order one for myself. As far as cases, I usually stick with TPU cases. The hard plastic cases always tend to scratch my phone a bit. In my experience, the TPU cases also absorbed the impact of drops better.
http://shop.ebay.com/i.html?_from=R40&_trksid=m570.l2736&_nkw=htc+evo+3d+tpu+case
Sent from my PG86100 using XDA App
Hi everyone,
I just bought my Transformer Prime last week, and I am faced with a major dilemma. I'm scared to death that I'm going to drop it, so I've been using the case I bought for my granddaughter's original Transformer. It doesn't quite fit, but it works.
I'm trying to decide how to protect my new tablet. I like the look of leather and a well-padded case would provide good protection, and the ones with stands are very utilitarian. However, it would be a shame to cover up such a beautiful device! (After all, its good looks are one of its strong selling points.)
Has someone found a good solution for protecting their tablet while still being able to show it off?
(I apologize if this question has already been answered; if so, please just point me to a link. Sometimes it's really hard to find the right search terms.)
Thanks!
I have ordered the case shown in link below. In my case I have the Dock also and this seems to me the Best available. Though this might not be what you need thought I would at least post it for you.
http://www.amazon.com/gp/product/B006ULQPTI
Sent from my Transformer Prime TF201 using Tapatalk
Since we have an Accessories Forum for the Transformer Prime that discusses accessories like cases, created for or compatible with the Transformer Prime, you might look there for answers first.
This thread in the Accessories forum would be a good place to start:
Ultimate Transformer PRIME TF201 Accessory Guide
Check out this one
This is the one I will be sporting once it is available... April 16...
http://www.gumdropcases.com/asus-prime.html
I've got a simple 10" laptop/tablet neoprene sleeve. The prime fits nicely inside it with or without the dock attached. Apart from that i dont have any protection on it right now and its been working well for me. Having it for 2 months now and i dont have any scratches. And i have it with me most of the times in my backpack or guitarcase.
MagicSpeller said:
Hi everyone,
I just bought my Transformer Prime last week, and I am faced with a major dilemma. I'm scared to death that I'm going to drop it, so I've been using the case I bought for my granddaughter's original Transformer. It doesn't quite fit, but it works.
I'm trying to decide how to protect my new tablet. I like the look of leather and a well-padded case would provide good protection, and the ones with stands are very utilitarian. However, it would be a shame to cover up such a beautiful device! (After all, its good looks are one of its strong selling points.)
Has someone found a good solution for protecting their tablet while still being able to show it off?
(I apologize if this question has already been answered; if so, please just point me to a link. Sometimes it's really hard to find the right search terms.)
Thanks!
Click to expand...
Click to collapse
Forgive me if someone already posted, but I bought a leather case from Best Buy made by a well known name..Targus.
It does offer great protection and has the stand built in, a nice velvet/cashmir type fabric inside. I don't have the link but it's the only one that the Best Buy by me had so I grabbed it. It was $40.00
This ISN'T my Transformer Prime
Yeah there are a lot to choose from on Amazon.com. This is the one I went with, I'm happy overall:
http://www.amazon.com/gp/product/B0063Q3G3I/ref=oh_o00_s00_i00_details
Thanks!
Thank you, RonH54. That looks like a very nice case. The problem is that although the front of the keyboard is visible, the back of the keyboard and pretty much everything on the tablet itself is pretty much covered--so no one can see how nice it looks. (My dilemma....)
I'm also a little concerned about the very negative review I saw there!
joedeveloper, the Moko also looks very nice, but also has the same issues. And Pixelation, I haven't seen the Targus case, but I assume it covers the tablet as well. Am I right? And finally, Gage_Hero...!!!! What can I say? That looks like a pretty extreme solution. I don't plan to treat my tablet in a way that I would need anything like that.
almightywhacko, thank you for the link. I had already seen it, and looked at most of the cases there, but got discouraged because they all looked pretty much the same and all covered the tablet so you couldn't see it. I tried to post my question in the Accessories Forum first, but was told that I was breaking forum rules by posting a question there and that I needed to post in the Q&A forum--so here I am.
I've never seriously considered a sleeve, but clouds5, thanks for the suggestion. There are several listed in the Accessories Forum thread, so I intend to look at them. That might be the best compromise, because the tablet would be protected when it most needed it, but would be on display when I was actually using it.
The only other option that has occurred to me is a clear case. Something like the Invisible Shield wouldn't provide enough impact protection (although I would need something like that for the screen to prevent scratches)--but there might be a clear case out there that is more protective. Has anyone seen something like that?
Again, thanks to everyone for your contributions. You have given me some new ideas. (Sorry to be so slow--I've tried several times to post over the past couple of days, but kept being told that "the token had expired", whatever that means!)
I have 6 cases. I am not kidding. 6.
Like you, I have a tf101 sleeve that works for basic thin protection (given to me by a friend that didn't like it for their og). I have a neoprene case (another give-me). I have a non-tf202 specific hard-ish case made by CaseLogic that I like a lot because it will hold the tablet+dock and it is very durable. I have the MiniSuit linked to above for the tablet+dock and it sucks. Badly. They are a good company and they have done right by me, refunded my money, etc, but the design is horrible with a very basic flaw - the leather is way too thick where the dock meets tablet and that is just not going to be good over time. I have "modified" it with a pair of scissors so that it wont break my tablet+dock - it does make a nice case for carrying and using them both. I also have the MiniSuit 360 case. I really like that one because the tablet is detachable from the case.
IMO = The best one is the one joedeveloper linked to. Slim, good protection and really shows off the Prime. It is the only one that does not cover the bezel. It is very "configurable" and you can use the dock WITH it. I can be folded half way back and then half of the beautiful back is "shown".
I have the full body skinomi skin for my tablet and dock so I have that as added protection so I son't mind using my dock with that case because I know my dock wont get scratched. But i wont use that if I need to carry or travel with the dock, I'd use one of the other ones.
So...slugbug2010,
Let me make sure I understand you. You like the MoKo case "best" because it doesn't cover the bezel, but it doesn't give enough protection to travel with it? So you would recommend buying a second case for traveling with it (in addition to a full-body skin)?
I can't tell from looking at it and reading about it on Amazon if it covers the keyboard, or just the tablet itself. If it covers both, can the two pieces be separated? If it doesn't cover the keyboard, I'd need to have a separate sleeve or something to protect it.
Can you and joedeveloper elaborate a little more, please?
Thanks!
You can get some balls for your Eee pad if you are afraid of dropping it.
http://iballz.info/universal.html
Reading your post again, it looks like you want a clear TPU case like this one made for the iPad http://www.amazon.com/CrazyOnDigital-Accessories-Cover-Retail-Package/dp/B004RRU7NM
However sadly no company has yet stepped up to the task of making such a case. Theoretically a TPU case would provide decent drop protection and not alter the look of the tablet much. And since it is so thin it would work well with a sleeve for added padding when not in use.
Yes, the TPU case looks like it might be along the lines of what i want--but it appears that I'm out of luck.
texstar, the iBalls are a really interesting concept (despite the name). I'm thinking they might be the perfect thing for my granddaughter's Transformer, providing some protection and leaving the tablet easier to use than the traditional case I already have for her.
As far as using them with my Prime--they certainly would expose the tablet itself, but I'm not sure I like the "quirky" look mentioned by some of the reviewers. It's also not clear whether or not they might cover up some of the ports and controls.
If your post was a serious one, do you own them? Has anyone tried them on your tablets?
Joedeveloper and Slugbug2010, are you still there? I really like the Moko case, but it's tablet only. The Minisuit looks nice, too, but seems to be thicker than what I'm looking for. I think I need a combination of the two....
Those of you who are using the Moko and have a dock, do you have a separate case for it, use a sleeve, or just leave it unprotected?
Thanks again for all your help.
Sent from my Transformer Prime TF201 using xda premium
I pre-ordered the Gumdrop case months ago. During the wait for it, I began to really enjoy using my keyboard dock and now, I am not so sure I want the Gumdrop case. I can still return for a full refund. I was wondering if anyone out there uses this case and also has the keyboard dock. Is it a pain to switch back and forth?
I thought about keeping it for when I know I wont be using the dock much and for times where chances of dropping it would be greater.
Thanks!
Brian
garak0410 said:
I was wondering if anyone out there uses this case and also has the keyboard dock. Is it a pain to switch back and forth?
Thanks!
Brian
Click to expand...
Click to collapse
I don't have the Gumdrop case, but I thought about getting it.
After my son purchased the OtterBox for his iPad, I finally dropped the idea.
I realize the Otterbox isn't the exact same as the Gumdrop, but I think they're similar.
The Otterbox, while providing excellent protection, is a PAIN to remove! It would make each use a the dock a minor decision, deciding if I wanted to bother taking the case off and then dealing with putting it back on! Again, I don't OWN the Gumdrop, and maybe it's unfair to use the Otterbox as a reference, but from what I've read, they (Otterbox and Gumdrop) share in two characteristics... they're both somewhat difficult to put on/take off, and they're both heavy.
Which is the 2nd negative, in my mind, to the Gumdrop/Otterbox... the weight!
If I worked in very dirty/risk prone areas, maybe I'd give it another thought.
ShelW said:
I don't have the Gumdrop case, but I thought about getting it.
After my son purchased the OtterBox for his iPad, I finally dropped the idea.
I realize the Otterbox isn't the exact same as the Gumdrop, but I think they're similar.
The Otterbox, while providing excellent protection, is a PAIN to remove! It would make each use a the dock a minor decision, deciding if I wanted to bother taking the case off and then dealing with putting it back on! Again, I don't OWN the Gumdrop, and maybe it's unfair to use the Otterbox as a reference, but from what I've read, they (Otterbox and Gumdrop) share in two characteristics... they're both somewhat difficult to put on/take off, and they're both heavy.
Which is the 2nd negative, in my mind, to the Gumdrop/Otterbox... the weight!
If I worked in very dirty/risk prone areas, maybe I'd give it another thought.
Click to expand...
Click to collapse
I have a carrying case that fits my Prime when docked to keyboard too. It provides good protection for transportation...when I use it, I try to not use in a way where I could drop it. So the Gumdrop really isn't needed. Plus, the Prime looks so good without a case...