[CAB]wp7 7740 offline cab - HD2 Windows Phone 7 Development

successfully send this cab to update 7720 to 7740. if see error message on PC don't worry, pls try many times.
warning: TouchXperience 1.6 beta won't work for 7740
EDIT: it just can be used for [ROM] Back to the Future [XBmod-Yuki] [7720 ready] [28/08]. Other rom can't use this method to update.

thanks for sharing

Its not good cab... After installing my phone reboots and it said SD card not working - changed or damaged :-(

Petulinek said:
Its not good cab... After installing my phone reboots and it said SD card not working - changed or damaged :-(
Click to expand...
Click to collapse
i think you didn't use [ROM] Back to the Future [XBmod-Yuki] [7720 ready] [28/08] this rom

joyqing said:
i think you didn't use [ROM] Back to the Future [XBmod-Yuki] [7720 ready] [28/08] this rom
Click to expand...
Click to collapse
Yes, this appendix wasnt in your post when i dowloaded cab :-(

What does 7740 bring you? First time I've heard of this version.

Internet Sharing
Is "internet sharing" working with this update?

Just updated, Great, not sure what any difference is but my phone is 7740 now

It fixes some of the Exchange Server issues that Build 7720 has and it also adds some improvements to the voicemail notification.
+ I guess: Internet sharing
=)

Helllo
Yhe senior member PETBEDE says that's
"Hi ALL.
HTC and SAMSUNG are PUSHING OUT UPDATE through ZUNE.
DO NOT UPDATE to that if by chance u have it cause it will CHANGE your BOOTLOADER(SPL) to 5.XX and making you not to be able to FLASH ROM.
I am using HTC HD7 the SPL is 5.10. Don't know what SAMSUNG will be but I do know u won't be ABLE to FLASH ANY ROM."
Any of you can confirm if in HD2 change number of bootloader
Thanks

Just applied this cab, no internet sharing whatsoever.
Rebooted phone and held down volume:
Code:
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
So I guess my bootloader is still intact.

updated my hd2 sucessful,
i'm on 7.10.7740.16 now. firmware revision 72250.21.40600.444, bootloader 0.96.2250.0.
internetsharing (settings-page activated with cab around here) doesn't work like before because of "wrong settings" my apn is set to web.vodafone.de
any idea what i can do to make it work??

malsehn said:
updated my hd2 sucessful,
i'm on 7.10.7740.16 now. firmware revision 72250.21.40600.444, bootloader 0.96.2250.0.
internetsharing (settings-page activated with cab around here) doesn't work like before because of "wrong settings" my apn is set to web.vodafone.de
any idea what i can do to make it work??
Click to expand...
Click to collapse
few weeks ago i have this problem with bootloader 0.96....
solution: simple turn off device. pull out battery and leave few minutes without battery. putt battery back and boot to bootloader... HSPL 2.08 must be back.... if not try without battery longer....

oh, not to get me wrong, my phone boots and runs correctly, just the internet sharing doesn't work... the bootloader info i wrote is just displayed in the phone's info page ...
[edit] ... oh, ok, you're right, it's displayed in bootloader-mode (tricolor-screen), too... will try your method now any further help with ics still appreciated..

Recently I have not been getting sms notification of voicemails.
This update seems to have fixed this issue.
Thanks

im successfully update to 7740. but there's no internet sharing setting.. any ideas? thanks

Beterry Life Anyone???
Does anybody know how well the battery performs under this new update?

tarmizizain said:
im successfully update to 7740. but there's no internet sharing setting.. any ideas? thanks
Click to expand...
Click to collapse
you can activate the ics toggle in the settings page with the xap on this thread (for instruction see the last sentence in first post)
but if switched to on, it will still pop up with a messsage
"Connecton not shared. There's a problem with the current settings" because of the lack of proper driver (firmware) updates

支持joy,感谢你的分享。。

malsehn said:
you can activate the ics toggle in the settings page with the xap on this thread (for instruction see the last sentence in first post)
but if switched to on, it will still pop up with a messsage
"Connecton not shared. There's a problem with the current settings" because of the lack of proper driver (firmware) updates
Click to expand...
Click to collapse
thanks. so, our poor HD2 will never be able to have internet sharing because of the driver.. is that it? that is sad.

Related

No WLAN!

Help!!
After un-bricking my device through the kitl way, for some reason the wifi lan cannot be opened no matter how many time I do a complete re-flash of the original rom..
Is it possible that a bad block was created when the device was bricked...
I noticed using taskmanager, in devices, the \device\mix1.dll is unloaded and it cannot be started manually because it cannot be found.
Where can I find the registy settings to see if WLAN is set correctly
Also, how can I extract and view the *.nb file once they are extracted from .nbh format. I want to try and find the mix1.dll and enter it manually and see if that does anything..
Mal...
I have the same problem after Unbricking my phone. Something was wrong with my Extended ROM after unbricking, it can never been unlocked like before. I would like to know how to fix the problem too.. No WiFi!
No Way!!!! I have the same problem too! Does you device run hotter than it used to and has less battery life? Mine does.
http://forum.xda-developers.com/showthread.php?t=294919 theres the link to my thread, I think I asked an admin to change the thread name to WLAN problem, but it hasn't happened yet, (you know how busy they are!)
Do the AKU 3.3 roms work for you guys?
I reflashed my old rom, it hasn't fixed my WLAN problem, but my device doesn't overheat and lose battery power rapidly
cjchriscj said:
No Way!!!! I have the same problem too! Does you device run hotter than it used to and has less battery life? Mine does.
http://forum.xda-developers.com/showthread.php?t=294919 theres the link to my thread, I think I asked an admin to change the thread name to WLAN problem, but it hasn't happened yet, (you know how busy they are!)
Do the AKU 3.3 roms work for you guys?
Click to expand...
Click to collapse
How do you know what aku rom is installed. I have installed it but how does one check?
Also, im finding my 3G/UTMS is virtully non existant. I work less than 1km away from a tower and it still absolutely shight!!!
My 2g is not that fantastic either..
Mal..
malrose said:
How do you know what aku rom is installed. I have installed it but how does one check?
Also, im finding my 3G/UTMS is virtully non existant. I work less than 1km away from a tower and it still absolutely shight!!!
My 2g is not that fantastic either..
Mal..
Click to expand...
Click to collapse
mal... please goto the 'Device Information' application in 'System' and post your ROM version and Radio version details....
walshieau said:
mal... please goto the 'Device Information' application in 'System' and post your ROM version and Radio version details....
Click to expand...
Click to collapse
ROM Version 2.05.255.1
Radio 1.35.00.11
Protocol 32.68.7020.10H
Bootloader 1.01mfg
Super CID
Mal..
malrose said:
ROM Version 2.05.255.1
Radio 1.35.00.11
Protocol 32.68.7020.10H
Bootloader 1.01mfg
Super CID
Mal..
Click to expand...
Click to collapse
you have AKU3.3
what operator are you using in AUS??
3 Aus
SHIGHT!!!!!!!!!!!!!!!
I just hooked up with them about 2 months ago and got a DopPod 838 Pro with an 200mb internat package...
Roaming on the 2g telstra when 3 AUs is not available but the [email protected]#CH at the store failed to mention to me that Im charged by time when roaming on the Telstra Net and not Usage/mb...
Even though there is no difference in talk calls..
Mal..
AKU 3.3's radio doesnt work right for me Its always searching, says I have no service and doesn't realize when I have a sim card in or out. I think it might the radio, but I don't think you can change it with the new roms.
Since my WLAN stopped workin ive been getting crappy battery life, it lasts less than for hours in sleep mode
malrose said:
3 Aus
SHIGHT!!!!!!!!!!!!!!!
I just hooked up with them about 2 months ago and got a DopPod 838 Pro with an 200mb internat package...
Roaming on the 2g telstra when 3 AUs is not available but the [email protected]#CH at the store failed to mention to me that Im charged by time when roaming on the Telstra Net and not Usage/mb...
Even though there is no difference in talk calls..
Mal..
Click to expand...
Click to collapse
yeah thats how they get you with the hidden charges.... i havent had any issues with Vodafone and their HSDPA network... works a treat for me...
walshieau
Do know what the file mix.dll is for?
I cant seem to find it anywhere and dont know if that is part of the utms or WLAN..
Mal..
no idea... but found this in the wiki http://wiki.xda-developers.com/index.php?pagename=UniversalWM5Devices
driver is listed there...
walshieau said:
no idea... but found this in the wiki http://wiki.xda-developers.com/index.php?pagename=UniversalWM5Devices
driver is listed there...
Click to expand...
Click to collapse
I searched for mix.dll using search feature in Resco File Explorer and it couldn't find it. However it found all the other files that were on the list that I searched for. Can someone without this WLAN problem search and see if they have mix.dll? I'm pretty sure that it should be located in \Windows
I just searched for WZCSCV.dll and couldn't find that either. I think also has to do with the WLAN, I belive that is soemthing to do with the Zero Configuration
So far I can't find
WZCSCV.dll
MIX.dll
Is anyone else having this problem?
would it be possible for someone to upload the mix.dll and WZCSCV.dll
so I could see if it could put them on my pda?
im not sure that you require mix.dll as i cannot find it on my device but here is wzcscv.dll from the aku3.3 rom...
Might be a dumb question, but, couldn't you just reflash the device again to fix the WLAN issue? Or, do a few hard-resets in a row.. That seems to fix some gremlins.
Or, now that the unlocker v3 is out, unlock and go to a different ROM altogether and see if that fixes the issue for you (to see if it's a hardware issue that is still causing problems or just a software issue).
Just my two-cents.
LegolasTheElf said:
Might be a dumb question, but, couldn't you just reflash the device again to fix the WLAN issue? Or, do a few hard-resets in a row.. That seems to fix some gremlins.
Or, now that the unlocker v3 is out, unlock and go to a different ROM altogether and see if that fixes the issue for you (to see if it's a hardware issue that is still causing problems or just a software issue).
Just my two-cents.
Click to expand...
Click to collapse
I've tried hard resetting and flashing to different roms numerous times and nothing seems to help
well i dont believe that a simple file replacement will fix the problem... it sounds like a hardware issue....
Just a guess, but, I wonder if in the process of bricking it/repairing it, you've missed forcing an update on some part of the device.. Maybe a BL or something like that isn't quite 'right'...
Anyways, that sucks to get the device unbricked only to have this problem I feel for you.

New ROM for JASJAM 1.31.305.2_106_6275_1.38.30.10 from Telstra

Hi Guys
I have just noticed that there is new ROM published on www.clubimate.com today.
As far as i understand it is the same OS version as installed on all JASJAMs sold by Telstra, but just with new radio and maybe new extROM ?
What i dont understand is why it says 1.38.30.10 instead of 1.38.00.10 ?
Maybe some additional customizations for their NextG network ?
Here is the link:
ftp://ftp.clubimate.com/i-mate_JASJAM_telstra_1.31.305.2_106_6275_1.38.30.10_108_ship.zip
Hey, good find!
Dunno if i have time for flashing ROMs today but will have a look at some stage. Lol, dunno what's with the standard OS but nomenclature of radio rom is intriguing.
PS just noticed you're in adelaide. Good form
Hi there...have downloaded the RUU already and made the nbh with GSM.nb only...but have no time to make the upgrade...if someone have made the upgrade already post if it is all OK...
regards,
Primoz
I didnt know we could flash GSM via mtty? Thought we needed an RUU.
Unless im missing something?
mshagg said:
I didnt know we could flash GSM via mtty? Thought we needed an RUU.
Unless im missing something?
Click to expand...
Click to collapse
look in the Wiki the upgrade guide...I have followed the guide to get rid of the SPL, OS, extrom,...and left just the GSM.nb inside and will update via RUU...
Regards,
Primoz
Pc78 said:
look in the Wiki the upgrade guide...I have followed the guide to get rid of the SPL, OS, extrom,...and left just the GSM.nb inside and will update via RUU...
Regards,
Primoz
Click to expand...
Click to collapse
That makes sense
Apologies, im new to all of this... slowly getting through the wiki!
Pc78 said:
Hi there...have downloaded the RUU already and made the nbh with GSM.nb only...but have no time to make the upgrade...if someone have made the upgrade already post if it is all OK...
regards,
Primoz
Click to expand...
Click to collapse
Could you please upload extracted RadioROM to rapidshare or megaupload ?
am doing it now... stay tuned
I extracted the radio rom. It is 1.38.30.10, flashed it with the new Custom RUU works great. I'll test it today to see if there's any noticable difference between 1.38.00.10. Here it is if anyone wants it. When it doubt use Force Using SSPL.
http://rapidshare.com/files/22823346/Radio_1.38.30.10.rar.html
guapinoy said:
I extracted the radio rom. It is 1.38.30.10, flashed it with the new Custom RUU works great. I'll test it today to see if there's any noticable difference between 1.38.00.10. Here it is if anyone wants it. When it doubt use Force Using SSPL.
http://rapidshare.com/files/22823346/Radio_1.38.30.10.rar.html
Click to expand...
Click to collapse
changes are minor... 3G fixes for the 850Mhz networks here in AUS....
well some parts of cingular runs 3g in 850 like here in jacksonville...so might help some of us here too
I have just flashed it, i havent had any problems with 1.38.00.10 on Telstras NextG network, so will see how this one goes. ;-)
Hi all, I've just installed the WM6 Black 1.2 and Hard SPL 1.10 Oli to my Jasjam, very nice. It took me all last weekend to reinstall the Applications and data.
My current ROM is 3.22.200.4 and Radio Rom is 1.20.31.10. I've just want to know:
1. Is it worth just install this Radio Rom only 1.33.30.10 to improve my GSM reception and WIFI.
2. Also if I install the Radio Rom only- do I still have to reinstall every Applications AGAIN.....
Cheers
pl55 said:
1. Is it worth just install this Radio Rom only 1.31.305 to improve my GSM reception and WIFI.
Click to expand...
Click to collapse
About 1000x said there is NO improve in WIFI with radio ROM...this is part of the OS and not the Radio ROM...yes it is worth if you have any older version than 1.38.00.00
pl55 said:
2. Also if I install the Radio Rom only- do I still have to reinstall every Applications AGAIN.....
Click to expand...
Click to collapse
It depends on the way you do the install...cause the latest RUU (original one) make task 28 on the end of the install and this mean HARD RESET...I will do my update from SD card...
Regards,
Primoz
Well I've been using it for a day now and haven't noticed any huge improvement in the radio but I with more use it may prove to be better.
Noticed the new MS Packet Video player. Guess this is to solve the problems Telstra customers were having with no Foxtel sevices on the Jasjam. I believe it was an issue of Media Player not being compatible.
Also a few small changes to Telstra customizatons. No changes to WM5, still AKU 2.3.
Maybe my imagination, but I thought I used to be able to turn on Flight Mode (radio off) and still have WiFi on, but can't now. Also the tab in Phone options to Update Time has gone, and there seems to be one less tab in the WiFi settings. Guess you can get them back with reg hacks.
Funny how everyone raves about how fast WM6 feels when they first install it... this update made me realise how fast WM5 feels when it is a new/clean install.
I uploaded the Radio Only with the Olipro RUUWrapper so it wont HR after you install. Also NON rapidshare mirror.
http://www.bestsharing.com/files/INdT1250288/RUU Radio Only 1.38.30.10.exe.html
A reference:
Last Updated: 27 March 2007
As a further enhancement to the Next G (TM) network, Telstra will carry out a platform upgrade which will affect i-mate JASJASM users and will require them to carry out a software upgrade for their handsets. This software upgrade will be available on a CD and on the www.imate.com/jasjamsupport website.
Customers who purchase an i-mate (TM) JASJAM must be informed prior to purchase that their i-mate JASJAM handset will require a software upgrade. Customers must be told that this software upgrade is available on the www.imate.com/jasjamsupport website. CDs with the software upgrade will be available on request from the website soon.
Post the network upgrade, the customer will need to have installed the new software on their device in order to maintain simultaneous voice and data connectivity.
Before the network upgrade, all Telstra i-mate (TM) JASJAM users will be sent an SMS, followed by a direct mail piece with instructions on how to facilitate the upgrade.
Note: the customer must download the upgrade to a PC then to the handset. There is no provision to download directly from the imate site to customers handsets.
Customers are advised to backup all personal data prior to downloading the software to their device.
Click to expand...
Click to collapse
From that link, the enhancements :
The essential service enhancements include:
• Network enhancement: this upgrade will even further optimize the performance of your i-mate™ JASJAM on the Telstra Next GTM network, taking full advantage of all the latest network enhancements and ensuring you can continue to make/receive calls during a data transmission eg. Direct Push Email.
• Time Zone fix: currently some of your appointments may appear to be shifted forward by one hour. This may have occurred when daylight savings commenced. The service upgrade will help stop this occurring.
• Unknown USB device driver fix: you may have seen an "Unknown USB device" error message appear on your screen. It is extremely intermittent, and only experienced by a small number of devices. The service upgrade will help stop this error occuring.
• Screen Backlight fix: you may have experienced your back light not turning on making it difficult to read the screen. It is extremely intermittent, and is only experienced by a small number of devices. The service upgrade will help stop this occurring.
• Freeze fix: you may have experienced your device freezing up. It is extremely intermittent, and is only experienced by a small number of devices. The service upgrade will help stop this occurring.
• Bluetooth® fix: this enhanced version of Bluetooth® is designed to improve the ability to connect your i-mate™ JASJAM to other Bluetooth® compatible accessories eg. Bluetooth® headset or car kit.
Click to expand...
Click to collapse
"extremely intermittent" device freezes? Some here would beg to differ.
Anyone extracted the cab files from EXTROM?
Hi
Are the new Windows Media streamer install file located in the EXT rom?
Can anyone extract those from the installation file and post them somewhere?
Thanks
JY
guapinoy said:
When it doubt use Force Using SSPL.
Click to expand...
Click to collapse
While it's technically OK to use with the radio ROM you created, it's bad advice in general (particularly if you have Hard-SPL installed). The "Force SSPL" option should only be used to upgrade/downgrade Hard-SPL. The latest Custom RUU (V4) has SPL auto-detect. When it doubt, use that!
naydonov said:
Hi Guys
I have just noticed that there is new ROM published on www.clubimate.com today.
QUOTE]
Hei! Can you look for a spanish Hermes rom in cluImate? Is there one? If so, could you download it for me? Thank you
Click to expand...
Click to collapse

[Q] T-mobile HD2 Update MR Software (Version 3.14.531.1), What is it?

T-mobile HD2 Update MR Software (Version 3.14.531.1), What is it?
Today T-mobile release a new software update. Does anybody know what it is for?
I assume if you have a rom installed it is no good. I am running Energy Rom, and Radio 2.15.50.14, so I am assuming updating would be a bad idea.
yeah has anyone installed it and what are the benefits of it?? I want to know b4 installing...
You may get better answers over in the TMOUS HD2 forum on this
Features of the 3.14.531.1 update
I also had the same question - what is it that changed with the new HTC HD2 ROM? I spent a lot of time searching, and found this:
Pasting the text below, just in case that link dies (I hate it when that happens):
[pasted from phonesreview uk on 10/22/2010]
==============================================
For all you T-mobile HTC HD2 smartphone users out there who have been waiting for an official software update to land, you’ll be happy to know that today is the day you have been waiting for as T-Mobile is to release software update version 3.14.531.1 to the HTC HD2.
According to an article over on Tmonews, the new software update from T-mobile will deliver several fixes along with stability improvements and access to new apps like Amazon MP3 and Shazam. As for those bug fixes…
The new software update will fix such stuff as slow browsing when on Facebook, the inability to delete Gmail messages in the preview screen, Twitter errors, SMS being delivered to the wrong person, and the white screen whilst browsing the net, the inability to hear Visual Voicemail, unable to unlock the device, unable to unlock the HTC HD2 with correct password, and the lack of a space bar on company directory keyboard, and finally the speakerphone doesn’t work after using the Call Assist app to call 611.
HTC HD2 user can download the new software update by visiting t-mobile and following the instruction; however T-mobile will issue a notification by text to HTC HD2 users when the update is ready, which should be today the 19th of October so keep an eye on your text messages and let us know how you get along.
xxandy said:
I also had the same question - what is it that changed with the new HTC HD2 ROM? I spent a lot of time searching, and found this:
Pasting the text below, just in case that link dies (I hate it when that happens):
[pasted from phonesreview uk on 10/22/2010]
==============================================
For all you T-mobile HTC HD2 smartphone users out there who have been waiting for an official software update to land, you’ll be happy to know that today is the day you have been waiting for as T-Mobile is to release software update version 3.14.531.1 to the HTC HD2.
According to an article over on Tmonews, the new software update from T-mobile will deliver several fixes along with stability improvements and access to new apps like Amazon MP3 and Shazam. As for those bug fixes…
The new software update will fix such stuff as slow browsing when on Facebook, the inability to delete Gmail messages in the preview screen, Twitter errors, SMS being delivered to the wrong person, and the white screen whilst browsing the net, the inability to hear Visual Voicemail, unable to unlock the device, unable to unlock the HTC HD2 with correct password, and the lack of a space bar on company directory keyboard, and finally the speakerphone doesn’t work after using the Call Assist app to call 611.
HTC HD2 user can download the new software update by visiting t-mobile and following the instruction; however T-mobile will issue a notification by text to HTC HD2 users when the update is ready, which should be today the 19th of October so keep an eye on your text messages and let us know how you get along.
Click to expand...
Click to collapse
It will also **** up some stuff, while fixing others.
No Bluetooth stack fixes...
Its horrible...I'm having the worst connections to apps like Omarket, Marketplace, Slacker Radio...The Wifi will not stay connected...The only thing working as far as connections is the internet.
edit: Everything's working now except the Facebook app.
hi... does anyone know?
i buyed my hd2 t-mobile unlocked and i'm using it in argentina with "Claro Argentina"... the question is... if i change the rom in this Leo... it's going to be locked again to be used only with T-Mobile?
i don't want to blow it!
thanks!
cainmako said:
hi... does anyone know?
i buyed my hd2 t-mobile unlocked and i'm using it in argentina with "Claro Argentina"... the question is... if i change the rom in this Leo... it's going to be locked again to be used only with T-Mobile?
i don't want to blow it!
thanks!
Click to expand...
Click to collapse
no. Once a phone is network unlocked it cannot be locked again.
cainmako said:
hi... does anyone know?
i buyed my hd2 t-mobile unlocked and i'm using it in argentina with "Claro Argentina"... the question is... if i change the rom in this Leo... it's going to be locked again to be used only with T-Mobile?
i don't want to blow it!
thanks!
Click to expand...
Click to collapse
yes, it will be locked again! But, there is no reason why T-mobile will not request an unlock code from HTC on your behalf. Usually it takes 24-48hrs
erezgati2 said:
yes, it will be locked again! But, there is no reason why T-mobile will not request an unlock code from HTC on your behalf. Usually it takes 24-48hrs
Click to expand...
Click to collapse
Not correct sir, ons your device is bean unlock't and you upgrade/downgrade your Rom it will not be locked again.
DensoYamaha41 said:
T-mobile HD2 Update MR Software (Version 3.14.531.1), What is it?
Today T-mobile release a new software update. Does anybody know what it is for?
I assume if you have a rom installed it is no good. I am running Energy Rom, and Radio 2.15.50.14, so I am assuming updating would be a bad idea.
Click to expand...
Click to collapse
Why you say it's a bad idea...because the official is no good or because you can damage the phone this way ? I went from omega to the 3.14.531.1 and I experience many problems freezes restarts etc ...I think the update damaged the phone (although it was successful)
yorgosb said:
Why you say it's a bad idea...because the official is no good or because you can damage the phone this way ?
Click to expand...
Click to collapse
no, because it would remove the rom he was using, which he didnt want.
I went from omega to the 3.14.531.1 and I experience many problems freezes restarts etc ...I think the update damaged the phone (although it was successful)
Click to expand...
Click to collapse
you probably left hspl installed, 3.14 plus hspl = "many problems freezes restarts etc"
Ι am no expert but I am sure I replaced HSPL with SPL 2.08
Still I experience all these freezes and restarts with both 2.13.531.1 and 3.14.531.1 versions (in 3.14.531.1 it even freezes when you insert the memory card)
Can it be something else ?
yorgosb said:
Ι am no expert but I am sure I replaced HSPL with SPL 2.08
Click to expand...
Click to collapse
so, is that spl 2.08 or hspl 2.08 or spl 2.08.0000 or hspl 2.08.hspl? clarity please, leaving off the last 4 digits prevents us from double checking your work.
enter bootloader, whats it say next to spl? (all of it, not just the x.xx bit)
samsamuel said:
so, is that spl 2.08 or hspl 2.08 or spl 2.08.0000 or hspl 2.08.hspl?
Click to expand...
Click to collapse
Entering the bootloader right now says 2.10.0000
It must have been changed after flashing the official 2.13.531.1 (via USB)
Prior to doing that I had run the utility hspl3 and chosen 2.08.0000 (there are 2 choices in this utility as you say 2.08.0000 and 2.08.hspl) so (I thought) I had replaced the hspl with the official loader
Does this utility (hspl3) effectively changes the SPL or just updates the displayed number ?
Do you suggest following the micro SD card method to flash and not the USB method ?
I read somewhere that the ONLY way to replace the SPL is by flashing from micro SD...so what is the hspl3 utility for ?
Can you help me with that please ?
I need help because the phone right now although it seems to have been flashed correctly to official 2.13.531.1 and displays 2.10.0000 as it's SPL version freezes and restarts every some minutes...
yorgosb said:
Entering the bootloader right now says 2.10.0000
Click to expand...
Click to collapse
thats stock - any ending 0000 is stock
It must have been changed after flashing the official 2.13.531.1 (via USB)
Click to expand...
Click to collapse
yes, because you chose teh wrong 2.08 (next step) it will be changed by usb flashing. Had you chosen 2.08.hspl, this would still say 2.08.hspl
Prior to doing that I had run the utility hspl3 and chosen 2.08.0000 (there are 2 choices in this utility as you say 2.08.0000 and 2.08.hspl) so (I thought) I had replaced the hspl with the official loader
Click to expand...
Click to collapse
you replaced stock with stock
Does this utility (hspl3) effectively changes the SPL or just updates the displayed number ?
Click to expand...
Click to collapse
completely changes the actual spl software in your phone.
Do you suggest following the micro SD card method to flash and not the USB method ?
Click to expand...
Click to collapse
usb, always usb
I read somewhere that the ONLY way to replace the SPL is by flashing from micro SD...so what is the hspl3 utility for ?
Click to expand...
Click to collapse
thats old instructions.
for a start hspl .exeis for applying hspl, not just removing it - you can simply run hspl3 (or hspl4, whichever, makes no difference) - choose an spl ending .0000, hspl is gone. choose one with .hspl and, , , guess, , , yes! it loads hspl onto teh phone.
Can you help me with that please ?
I need help because the phone right now although it seems to have been flashed correctly to official 2.13.531.1 and displays 2.10.0000 as it's SPL version freezes and restarts every some minutes...
Click to expand...
Click to collapse
yep, happens a lot that, especially with stock roms,, give 3.14 a try perhaps.
3.14.531.1 has more problems...not only it freezes with certain applications (or making phone calls) but it freezes when inserting the microSD card as well...that's why I went to 2.13.531.1...at least I could keep the microSD inside without freezing...
And that's why I think it's not a firmware-software issue...that's what I'm trying to verify...
Now I have another bigger issue...after trying to flash a firmware that I think it wasn't T-Mobile's by mistake (the phone is T-Mobile model) the SPL is now 3.03.0000 and the 2.13.531.1 and 3.14.531.1 firmwares refuse to start flashing
Is there something I can do ?
I want to go back to 2.13.531.1 so I can sent it to T-Mobile
Thanks
Use hspl4, choose 2.08.hspl, reflash 2.13.
Sounds like you flashed a non tmous stock 3.14,,, don't do anything that silly again.
Just confirm for us,,, your send key is green, right?
Thank you very much I used hspl4 and managed to go back to the proper ROM
As for the send key if you mean the key with the little telephone on it yes it's green...the phone is T-mobile it says so on the top
Now that I have tried 2.10.531.1 - 2.13.531.1 and 3.14.531.1 versions and all 3
suffer from strange freezes and restarts when making phone calls or watching movies from the internet or the storage card (after some time) don't you think it's safe to presume that there is a hardware fault and return it to the vendor ?
Do you think there is something else for me to try ?
Thank you again for your help...

Niki100 ~ Touch Dual - No Signal / Service!

Hi all! My Niki 100 isn't getting any signal / service. I live in Italy, my htc is factory unlocked.. I've tried some Radio ROMs, but no luck with any of 'em. What should I do? Thks
Sim0cYz said:
Hi all! My Niki 100 isn't getting any signal / service. I live in Italy, my htc is factory unlocked.. I've tried some Radio ROMs, but no luck with any of 'em. What should I do? Thks
Click to expand...
Click to collapse
what you have try with Niki SuperCID and Security Unlocker by jockyw ??
if not, you should check on this thread http://forum.xda-developers.com/showthread.php?t=395945
Hakim Rahman said:
what you have try with Niki SuperCID and Security Unlocker by jockyw ??
if not, you should check on this thread http://forum.xda-developers.com/showthread.php?t=395945
Click to expand...
Click to collapse
hey thanks! I'm trying this way. will let you know
Stuck on Supercid-niki.exe, can't execute it. Error:
\\.\WCEUSBSH001: No such file or directory
cannot connect to \\.\WCEUSBSH001
what should I do? I'm on Windows 7 x64 Pro. Tried to change usb port too
Sim0cYz said:
Stuck on Supercid-niki.exe, can't execute it. Error:
\\.\WCEUSBSH001: No such file or directory
cannot connect to \\.\WCEUSBSH001
what should I do? I'm on Windows 7 x64 Pro. Tried to change usb port too
Click to expand...
Click to collapse
You should first understand the instructions and tried to install WMDC for Windows Vista 64bit on your own computer! WMDC can you get on http://www.microsoft.com/download/en/details.aspx?id=3182
well, i already installed it, it's not working for me. i'm trying with Windows XP on an Oracle VM VirtualBox!
Sim0cYz said:
well, i already installed it, it's not working for me. i'm trying with Windows XP on an Oracle VM VirtualBox!
Click to expand...
Click to collapse
Ok, seems to work on WinXP @ VBox, but now I got stuck at two first lines
=== Niki SuperCID and Security Unlocker (c)2008) by jockyw2001
=== Donations happily accepted, paypal to [email protected]
but the tool won't continue doing his job..
I have the same problem: I have followed all the steps (Security Unlock, ROM isntallations, RADIO installations) but still no service (and with a Nokia I have full signal).
Ok, the problem was that I had installed HardSPL 1.22 instead of 1.15.
I flashed an official ROM, flashed HardSPL 1.15, flashed the suggested radio (1.58.21.23).
After that I ran the SuperCID, on my VirtualBox Windows XP based, disabled usb connection in ActiveSync, then it worked in a second. Nice! At the boot now I get "Security Unlocked".
Now I flashed the radio "RUU Nike Radio 1.58.21.23S Modded"
Going to insert my sim and check out
Ok, the Connection Setup installed the vodafone IT config, trying to reboot now..
Always the same.No Service.
If I try to press "Find Network", it takes very very long, after that I get "No Service"..
if I choose Network Selection "Manual", it can't retrieve the list of networks, says:
Cannot read settings from the network. Try viewing settings later, or disconnect data connection and try again.
Same if I try "Set Networks".
What can I do?
Tried another Radio,
1.58.21.23S Modded
1.64.08.21K
1.71.09.01K
Are not working for me.
I'm afraid it's a hardware failure, the only thing you can try, is to flash an original htc rom which can be found HERE and keep us informed.
@ ady_uaic , the same answer to you, but in your signature you own a hd2, if you only have a hd2 you have to go to this LINK.
Succes guys or gals.
Greetz,
Thx @Rataplan, indeed I have HD2. This is my wife's phone (she replaced her BB with this one). I tried also an original ROM, but doesn't work. The thing is that in my house I don't have signal, but outside is ok; so this means that the antenna is a little bit weaker than others.
Rataplan said:
I'm afraid it's a hardware failure, the only thing you can try, is to flash an original htc rom which can be found HERE and keep us informed.
@ ady_uaic , the same answer to you, but in your signature you own a hd2, if you only have a hd2 you have to go to this LINK.
Succes guys or gals.
Greetz,
Click to expand...
Click to collapse
OK, i'm trying the ITA rom (i'm from italy). Will let you know for sure.
tried. it's not working..
Sim0cYz said:
tried. it's not working..
Click to expand...
Click to collapse
That's bad, I'm afraid that your antenna is broken.
Sorry Sim0cYz
Rataplan said:
That's bad, I'm afraid that your antenna is broken.
Sorry Sim0cYz
Click to expand...
Click to collapse
Thanks for your help, do you know how could i fix it?
Sim0cYz said:
Thanks for your help, do you know how could i fix it?
Click to expand...
Click to collapse
HERE can you find the Service Manual, maybe you can fix it yourself.
Succes
Rataplan said:
HERE can you find the Service Manual, maybe you can fix it yourself.
Succes
Click to expand...
Click to collapse
hey thanks, u're a PRO! let me see!

HELP,HELP Bootloader Mode

During insertion of the roma:RUU_Mozart_HTC_Europe_4.06.401.00_5.69.09
I used these two applications (RSPL/HSPL) DFT_XSPL_WP7FG1 to change Bootloader
And everything went fine,The phone works OK but when you try to run to enter in
Bootloader mode appears on the phone this picture..
The red part of the write PD67100 SS-BC(4) and nothing more
Please HeLLPPP
same problem
by picture you mean tri-color bootloader screen?
mine is doing the exact same thing! would be great if someone could shed some light on the problem, i will keep you posted if i find a solution.
matt
Is that the Mango ROM? If so you are not meant to have HSPL on your device... You are meant to put back the Original SPL before you flash to the official Mango ROM.
Yes i think bootloader screen.
Thank you very much for trying to help me....
Yes,this is New MANGO ROM 7720
oops, thanks for your help. is it possible to reverse the process and restore it to original?
Its, problem me too...
help!
Bootloader restore ? maybe ?
How to ?
Full reset ?
How to ?
heeeeeeelp!
No clue, don't think there is a way to put an older SPL on your device at the moment.
Perhaps in time there will be a fix, maybe monitor the "Shipped HTC mango roms" in the Phone 7 forum, under the Development section
Sorry, can't give a link as I'm on phone. Perhaps try and flash hour device with a pre-mango ROM (Original, not custom)... See if it lets you, if so hopefully the bootloader will be put back to an older version.
You guys really need to read first and be more careful. If there are no replies and you think it may be dangerous then ask or wait for some feedback from other users
Sent from my 7 Mozart T8698 using XDA Windows Phone 7 App
Thanks, any other ideas?
Sent from my T8697 using XDA Windows Phone 7 App
I am also having the same problem.
seems that the solution will come out soon
see the topic http://forum.xda-developers.com/showthread.php?t=1195647&page=61
Nicolas Alves said:
I am also having the same problem.
seems that the solution will come out soon
see the topic http://forum.xda-developers.com/showthread.php?t=1195647&page=61
Click to expand...
Click to collapse
if we turn off the phone and press power, volume up and down and camera, the mobile enters and starts with USB connection for zune update, there may be able to restore the boot.
Thanks fjpg, gave it a go but it won't work either...
Sent from my T8697 using XDA Windows Phone 7 App
I have a telestra HTC Mozzart ver: 8697 phone
I first tried to install the official mango Euro rom (7720) but it complained about wrong vendor ID and didn't install
Then I installed DFT RSPL WP7 FG2 and then tried to installthe official mango Euro rom (7720) again, this time it made progress to 7% and then restarted my phone and didn't made any progress, but my spl is now version 4.6, no OS loads and when I try to install that rom it complains again about wrong vendor ID
Do you guyz know any mango rom that install for telstra operators?
Can I install my stock rom again?
this is whats currently written on my bootloader screen:
PD627120 SS-BC (4k)
SPL-4.6 2250.0(129193) MNG
MicroP(LED) 0x07
TOUCH C1(v66)
SD SANDISK 7680MB
Partition Info-v211v413
I fixed my phone by installing the telestra rom I found in this thread:
http://forum.xda-developers.com/showthread.php?t=915827
my phone now boots and runs fine but its still windows phone 7.07,
I'm now looking for a mango rom which works on my phone
dgmortal said:
I fixed my phone by installing the telestra rom I found in this thread:
http://forum.xda-developers.com/showthread.php?t=915827
my phone now boots and runs fine but its still windows phone 7.07,
I'm now looking for a mango rom which works on my phone
Click to expand...
Click to collapse
Guy, you fixed your problem but not the one which we talk about here

Categories

Resources