Hi all! My Niki 100 isn't getting any signal / service. I live in Italy, my htc is factory unlocked.. I've tried some Radio ROMs, but no luck with any of 'em. What should I do? Thks
Sim0cYz said:
Hi all! My Niki 100 isn't getting any signal / service. I live in Italy, my htc is factory unlocked.. I've tried some Radio ROMs, but no luck with any of 'em. What should I do? Thks
Click to expand...
Click to collapse
what you have try with Niki SuperCID and Security Unlocker by jockyw ??
if not, you should check on this thread http://forum.xda-developers.com/showthread.php?t=395945
Hakim Rahman said:
what you have try with Niki SuperCID and Security Unlocker by jockyw ??
if not, you should check on this thread http://forum.xda-developers.com/showthread.php?t=395945
Click to expand...
Click to collapse
hey thanks! I'm trying this way. will let you know
Stuck on Supercid-niki.exe, can't execute it. Error:
\\.\WCEUSBSH001: No such file or directory
cannot connect to \\.\WCEUSBSH001
what should I do? I'm on Windows 7 x64 Pro. Tried to change usb port too
Sim0cYz said:
Stuck on Supercid-niki.exe, can't execute it. Error:
\\.\WCEUSBSH001: No such file or directory
cannot connect to \\.\WCEUSBSH001
what should I do? I'm on Windows 7 x64 Pro. Tried to change usb port too
Click to expand...
Click to collapse
You should first understand the instructions and tried to install WMDC for Windows Vista 64bit on your own computer! WMDC can you get on http://www.microsoft.com/download/en/details.aspx?id=3182
well, i already installed it, it's not working for me. i'm trying with Windows XP on an Oracle VM VirtualBox!
Sim0cYz said:
well, i already installed it, it's not working for me. i'm trying with Windows XP on an Oracle VM VirtualBox!
Click to expand...
Click to collapse
Ok, seems to work on WinXP @ VBox, but now I got stuck at two first lines
=== Niki SuperCID and Security Unlocker (c)2008) by jockyw2001
=== Donations happily accepted, paypal to [email protected]
but the tool won't continue doing his job..
I have the same problem: I have followed all the steps (Security Unlock, ROM isntallations, RADIO installations) but still no service (and with a Nokia I have full signal).
Ok, the problem was that I had installed HardSPL 1.22 instead of 1.15.
I flashed an official ROM, flashed HardSPL 1.15, flashed the suggested radio (1.58.21.23).
After that I ran the SuperCID, on my VirtualBox Windows XP based, disabled usb connection in ActiveSync, then it worked in a second. Nice! At the boot now I get "Security Unlocked".
Now I flashed the radio "RUU Nike Radio 1.58.21.23S Modded"
Going to insert my sim and check out
Ok, the Connection Setup installed the vodafone IT config, trying to reboot now..
Always the same.No Service.
If I try to press "Find Network", it takes very very long, after that I get "No Service"..
if I choose Network Selection "Manual", it can't retrieve the list of networks, says:
Cannot read settings from the network. Try viewing settings later, or disconnect data connection and try again.
Same if I try "Set Networks".
What can I do?
Tried another Radio,
1.58.21.23S Modded
1.64.08.21K
1.71.09.01K
Are not working for me.
I'm afraid it's a hardware failure, the only thing you can try, is to flash an original htc rom which can be found HERE and keep us informed.
@ ady_uaic , the same answer to you, but in your signature you own a hd2, if you only have a hd2 you have to go to this LINK.
Succes guys or gals.
Greetz,
Thx @Rataplan, indeed I have HD2. This is my wife's phone (she replaced her BB with this one). I tried also an original ROM, but doesn't work. The thing is that in my house I don't have signal, but outside is ok; so this means that the antenna is a little bit weaker than others.
Rataplan said:
I'm afraid it's a hardware failure, the only thing you can try, is to flash an original htc rom which can be found HERE and keep us informed.
@ ady_uaic , the same answer to you, but in your signature you own a hd2, if you only have a hd2 you have to go to this LINK.
Succes guys or gals.
Greetz,
Click to expand...
Click to collapse
OK, i'm trying the ITA rom (i'm from italy). Will let you know for sure.
tried. it's not working..
Sim0cYz said:
tried. it's not working..
Click to expand...
Click to collapse
That's bad, I'm afraid that your antenna is broken.
Sorry Sim0cYz
Rataplan said:
That's bad, I'm afraid that your antenna is broken.
Sorry Sim0cYz
Click to expand...
Click to collapse
Thanks for your help, do you know how could i fix it?
Sim0cYz said:
Thanks for your help, do you know how could i fix it?
Click to expand...
Click to collapse
HERE can you find the Service Manual, maybe you can fix it yourself.
Succes
Rataplan said:
HERE can you find the Service Manual, maybe you can fix it yourself.
Succes
Click to expand...
Click to collapse
hey thanks, u're a PRO! let me see!
Related
Can anone tell me how i could unlock my wallaby lock on T-mobile?
i have already upgraded the ROM to 4.01.12
and radio to 4.21.00
protocol version is 32S54... but get Unlock Code screen everytime i insert my simcard...
please please please, im begging.... i read one article explaining about SpecialEditionROM but the link is dead... any option pls.???
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
T-Mobile Unlock
Lumpi,
I, too, have T-Mobile that I need to unlock. My problem is that I can't figure out how to install the XDA ROM that allows the unlock--the link at the bottom of the XDA page doesn't work.
Skip A
http://wiki.xda-developers.com/index.php?pagename=Wallaby
I can't open the step by step instructions for installing 'special edition 1.2'.
Some Wallabys don't support the GSM network that T-Mobile uses (at least in the UK), so if your phone works with other SIMs from Vodafone/O2 then chances are it will never work with T-Mobile. In this case, it's a hardware limitation and there is nothing that can be done about it.
Dear Stefan I want to meet u in person in stuttgart
LumpiStefan said:
http://wiki.xda-developers.com/index.php?pagename=UnlockWiz/Wallaby
Click to expand...
Click to collapse
Dear Stefan i will be in stuttgart for a church conference from 3 april to 12 april.
I have t-mobile wallaby PW10B1 ROM 4.02.04 eng 8/24/05 radio 6.18.00 protocall version 324e4. I am unable to unlock using xdadev_all_unlock.exe they give errors.the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working. can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
kjpeter said:
I am unable to unlock using xdadev_all_unlock.exe they give errors.
Click to expand...
Click to collapse
This is the wron tool. That does not work on the Wallaby device.....
kjpeter said:
the other ROM version u mentioned site http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe is not working.
Click to expand...
Click to collapse
I think you´re concerning on, that the link for downloading is not working...
Try this one: ftp://xda:[email protected]/Wallaby/ROM/Special/special_rom_1.2.exe.zip
kjpeter said:
can u please help me. is it possible to add a camera and GPS reeciever to my pda? i dont have serial cable.is it possible i can wire them all?
Click to expand...
Click to collapse
GPS-receiver should be no big problem. It should be a gps-receiver with PS2/serial-Connector. Any USB wouldn´t work....
How dou you want to conenct a camera?
If you didn´t get the unlocking worked, we can try if we can make a meeting when you are in Stuttgart, than i will take a look at it....
Stefan
I downloaded SE rom 1.2 and when i run exe in dos window i have a message - ERROR GetConnectionType.
i used activesync 4.5 beta on xp .
(actually i had activesync 3.5 on my xp pc but on wallaby-activesync itsays incompatible activesync .so i changed from 3.5 to 4.5 beta )
any help stephen?
how to upgrade the activesync in my pda?
you dont
upgrade it
Try using the 3.7 or the 4.0/4.1 Version of Active Sync.....
Stefan
xda2unlock
I put in boot loader mode the pressing left side sound control switch put it in to USB flash mode and ran xda2unlock.exe at desktop got XP shutting down that xda2unlock.exe. at that time i put active sync USB on stop. couldnt do any thing.
while try once i saw serial rs232 on wallaby screen i dont know how to acivate it again and try abouve procedure.
is there any other way to unlock my mobile.?
I want to connect to gprs and browse net.
wallaby unlock
i was finnally able to unlock mine yesterday (02/25/07) but you need to change 2 things before being able to use the unlocker.exe program . first you wont be able to do it via the usb connection it just wont work due to the rom currently installed use the sd mem card method to flash the rom using a card reader and OSIMagetool.you need to change the rom to the ROM: 3.17.03 ENG (XDA special edition) you need to do this so you can flash the radio and the current rom wont allow you to do it and then change the radio to version to Radio: 6.24.00 (mine was 6.25.02 and its whats not allowing the unlock to work ) then the unlocker.exe will work . the instructions are on this url http://www.romkitchen.de/tools/manual2_unlock.htm and the software i used is on this url http://www.romkitchen.de/tools/form.php .The instructions here changed the boot loader but it wasnt needed to get my phone unlocked you can probably skip that step also . good luck
Please, link is not working
The link ftp://xda:[email protected]_1.2.exe.zip is not working anymore.
Could someone please, point me in any other direction I can look for?
Thank you very much.
Manuel J.
P.S. Still searching
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
LumpiStefan said:
http://www.romkitchen.de/tools/special_rom_1.2.exe.zip
Click to expand...
Click to collapse
Thank you so much.
Manuel lJ.
want to meet u in stuttgart
Dear lumphistephen i dont know your personel mail id so this message ,i am reaching stuttgart on 2 april will be there till 15th april for church confernce how can i contact u there?
My Host Mr.Gunter Janzens phone number 0711-4579360 or 0711-457790 or 0175 689 5555 (mobile).Also u r welcome for the meetings where friends from all over the world come there for christian fellowship.can u please
give personel mail id .mine is [email protected]
This Rom is best for all those who have tmobile ameo stuck on bootloader
ENJOY
http://rapidshare.com/files/50715004/My_WM6_TMOB005.rar
Thanks very much. 2 Questions: Do I need to unlock my Ameo to use this and will GPS work afterwards?
Thanks
no neeed to unlock
gps works flawlessly
strange for me it says wrong vender id. I could really need the help because im stuck.
That is impossible, it will work for one countries ameo, but you cannpt have one thta will work for all ameos.
Hey
That is what it says. Perhaps i should explane what i did. I tryed to install the german rom on my ameo but unfortunatly i didn´t unlocked it before. So the progress aboarded.
Now i cant even do a hard reset. When i use this rom. it cant identify old rom but i start it anyway. It goes to 1% and thin it gives me the wrong vender message..
Plz help any suggestions really appreciated. I had german tmobile rom perhaps somebody has it and i can restore the old one?
Sexxmax said:
Hey
That is what it says. Perhaps i should explane what i did. I tryed to install the german rom on my ameo but unfortunatly i didn´t unlocked it before. So the progress aboarded.
Now i cant even do a hard reset. When i use this rom. it cant identify old rom but i start it anyway. It goes to 1% and thin it gives me the wrong vender message..
Plz help any suggestions really appreciated. I had german tmobile rom perhaps somebody has it and i can restore the old one?
Click to expand...
Click to collapse
Sorry I wasnt very clear, I was talking to the thread creator, your problem is due to the fact that his claims are false...
Ok i understand, can somebody supply me plz with the orignal german tmobile rom. My ameo is screwed. plz help
Cant the Tmob005 ROM be used on all Ameos?
adamelphick said:
Cant the Tmob005 ROM be used on all Ameos?
Click to expand...
Click to collapse
No, I don't think so.
For example, T-Mobile in Germany has the code T-MOB101
So, it's maybe for US-Ameos or GB-Ameos (I don't know)
all i know it doesnt work on my, and i need a rom for that i dont need to unlock the ameo because i cant untill i have it restored.
Sexxmax said:
Hey
That is what it says. Perhaps i should explane what i did. I tryed to install the german rom on my ameo but unfortunatly i didn´t unlocked it before. So the progress aboarded.
Now i cant even do a hard reset. When i use this rom. it cant identify old rom but i start it anyway. It goes to 1% and thin it gives me the wrong vender message..
Plz help any suggestions really appreciated. I had german tmobile rom perhaps somebody has it and i can restore the old one?
Click to expand...
Click to collapse
Hi
Try get into bootloader (press "camera button+stylus reset for atleast 10 seconds") then try to unlock with Olipro's unlocker (read the unlock thread first) then you can load any Rom as you want. If you unlock you can revive the device.
Good luck
Hi
Thank you for your advice. The problem is. I can go into boatloader but. It doesnt recognice a connected device. I have windows vista, if i plug in usb. It makes a sound for connection but nothing else happens.
In unlock utility it says i have to establish a activesync connection. How can i do this with only boatloader possible.
Does the unlocker work, if the rom is screwed. If it does it would be awesome and solve my problem. but plz advice on how i can make a connection to pc.
Sexxmax said:
Hi
Thank you for your advice. The problem is. I can go into boatloader but. It doesnt recognice a connected device. I have windows vista, if i plug in usb. It makes a sound for connection but nothing else happens.
In unlock utility it says i have to establish a activesync connection. How can i do this with only boatloader possible.
Does the unlocker work, if the rom is screwed. If it does it would be awesome and solve my problem. but plz advice on how i can make a connection to pc.
Click to expand...
Click to collapse
Hi Sexxmax,
I'm new to this forum (getting an Ameo tomorrow) so I may be wrong but the problem may be because you have Windows Vista. I remember reading on the Universal forum that flashing and unlocking is almost impossible to do on a Vista PC.
Interesting point. I tryed the unlocker on xp too. didn´t work either. But could it be that i get the wrong vender id as a result of that.
Do you get a german ameo? Then you could make a backup of the rom for me.
Sexxmax said:
Interesting point. I tryed the unlocker on xp too. didn´t work either. But could it be that i get the wrong vender id as a result of that.
Do you get a german ameo? Then you could make a backup of the rom for me.
Click to expand...
Click to collapse
No, I'm getting the English Ameo. There's a member on this forum called tupisdin. From what I can tell he/she is quite the expert at recovering devices that are experiencing errors. Try messaging him/her or searching for his/her posts.
So i wanted to flash my cingular 8125 to windows mobile 6, so i downloaded this:
(BIG MISTAKE)
http://www.tradebit.com/filedetail.php/2559279-Software-Programs-Cell-Phone-Programs
and i followed the instructions and after i hard reseted my phone, it booted to a white screen. I have tryed reflashing, going into bootloader mode and reflashing, and i nothing helps.
can one of the experts on this forum please help me???!!!
thanks
i need help assap!! lol
i dont care even if i flash back to winmo5, I JUST WANNA UNBRICK
dahdout said:
So i wanted to flash my cingular 8125 to windows mobile 6, so i downloaded this:
(BIG MISTAKE)
http://www.tradebit.com/filedetail.php/2559279-Software-Programs-Cell-Phone-Programs
and i followed the instructions and after i hard reseted my phone, it booted to a white screen. I have tryed reflashing, going into bootloader mode and reflashing, and i nothing helps.
can one of the experts on this forum please help me???!!!
thanks
i need help assap!! lol
i dont care even if i flash back to winmo5, I JUST WANNA UNBRICK
Click to expand...
Click to collapse
What IPL/SPL it displays now ? ,Does it get into Bootloaders ? if it still does than download and flash 'wizard_love_rom' hope it'll recover back.
RE:
It just boots into a white screen. If i hold the camera and power buttons together it boots into bootloader mode, and says USB in the bottom corner. (when i am conncected via usb) but the problem is that active sync doesnt recognize it in bootloader mode. I have tried flashing it in many different ways and i have had no success.
When i go home i will try wizard_love_rom.
and as for the IPL/SPL, i will also check that when i get home.
Where can i download the wizard_love_rom?
Thanks for the help !
RE:2
Hello,
Mr IPL and SPL are both 2.25.0001
My GSM: 02.25.11
My OS: 2.18.0.0
Good News
So, I flashed my phone with the "Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar"
which i found the download for over a quick google search, and now i want to update to winmo6 or 6.1.
Can you send me the link for the easiest way to do it on a G4 cingular 8125 (HTC Wizard.)
I have never CID unlocked, which was probably why i got the white screen earlier. but do i need to do it know that i am on the wizard love rom?
please help,
thanks
dahdout said:
So, I flashed my phone with the "Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar"
which i found the download for over a quick google search, and now i want to update to winmo6 or 6.1.
Can you send me the link for the easiest way to do it on a G4 cingular 8125 (HTC Wizard.)
I have never CID unlocked, which was probably why i got the white screen earlier. but do i need to do it know that i am on the wizard love rom?
please help,
thanks
Click to expand...
Click to collapse
Glade its working again !
You got a G4 device,it cannot be CID unlocked,but however,it can be upgraded to wm6 or 6.1,read the methods 'HardSPL' or 'SoftSPL' posted as stickies in the G4 forum for upgrading to wm6 or 6.1.
re:3
thanks, you really saved me with your help!
dahdout said:
thanks, you really saved me with your help!
Click to expand...
Click to collapse
Thanks !
Glade you got it working
sorry, but i need help... again
Ok,
I know that this may be getting a little annoying for you and im sorry for that, but i need your help on this. I am currently running the wizard love rom. And I have Hard SCP'd.
I have to problems:
1. My EDGE doesn't work, i only get GPRS speed data.
2. I can't upgrade to any new rom..... i always get "ERROR [300] Get a newer update utility!"
How can I fix both of these problems?
I have searched forums and google and nothing has come up.
dahdout said:
Ok,
I know that this may be getting a little annoying for you and im sorry for that, but i need your help on this. I am currently running the wizard love rom. And I have Hard SCP'd.
I have to problems:
1. My EDGE doesn't work, i only get GPRS speed data.
2. I can't upgrade to any new rom..... i always get "ERROR [300] Get a newer update utility!"
How can I fix both of these problems?
I have searched forums and google and nothing has come up.
Click to expand...
Click to collapse
ok,for error (300)you can use the RUU MUNS already posted in the 'HardSPL' thread,download the RUU_MUNS application extract it to a folder and copy and paste all the files of this extracted to the folder of the Rom replacing all the RUU files in that folder or copy the nk.nbf folder in the Rom to the extracted folder of the RUU_MUNS and then run the RUU,it will start to flash and complete and hopefully fully boot up.
For edge or gprs,you'll have to get network settings of your network carrier or check out the thread from where you downloaded the rom,its uaually posted there or check out the 'Network' thread.
Aquestion to Zabardast_1 ?
294 error , invalid vender ID
what does that means & asolution to it during rom update
ERROR [294] : INVALID VENDER ID
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
Hi to everyone,
I've read dozens of pages on how to do a HardSPL in Prophet G4, but i simply can't have success...
I've tried 4 or 5 methods that I found here, but none of them had been suceded...
I get a white screen, i get the 3 color screen, the connection fails...
I din't know what to do more... Can somebody help me, pleeeeeeeeaaaaaaaaaaaaseeeeeeeeeeeeeee....
I use Win XP Pro, and my Prophet gives me this info when I do Soft Reset:
IPL 2.10.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.734
I was already able to change ROM once, because I had it in portuguese and now is in english, and with other logos.
But what I would like was to install WM6.1 or 6.5...
The HardSPL *.bat file gives me this information, now:
"One or more CON code pages invalid for givem keyboard code"
"cerun:failed to execute program"
Can somebody give me some idea?
Thank you so much in advance!
I was in the same situation as you. You have to find the rom:
RUU_Prophet_220734_2207114_024721_NVID.exe
Search in the forum for the rom. After extracting the rom, run the file: ROMUpdateUtility_No_VenderID.exe.
It will survive your device. then you can install a wm6x rom from this site.
Don't forget to do hard spl your device next time.
Edit: It seems the rom is here:
http ://xvx45-spf.4shared.com/account/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html
Also there is a "readme.doc" in the rom dir. Read the section 8. It is written for you.
keenblade said:
I was in the same situation as you. You have to find the rom:
RUU_Prophet_220734_2207114_024721_NVID.exe
Search in the forum for the rom. After extracting the rom, run the file: ROMUpdateUtility_No_VenderID.exe.
It will survive your device. then you can install a wm6x rom from this site.
Don't forget to do hard spl your device next time.
Edit: It seems the rom is here:
http ://xvx45-spf.4shared.com/account/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html
Also there is a "readme.doc" in the rom dir. Read the section 8. It is written for you.
Click to expand...
Click to collapse
Hi keenblade,
I was able to do that. My PPC went with the 3 color screen, and then I user a rom with No vendor. I disabled USB connection in ActiveSync, and then I could do that. I brought my PPC back.
My problem is just the HardSPL... I just can't do it... I've tried so many tomes and with so many files that I think i need some straight orientation, or i don't know what was wrong...
In this moment i have the PPC with WM5, but what i really would like to do is make a HardSPL to install WM6...
Did you try "Prophet Upgrade" tool? Before running the tool, you have to connect with activesync.
keenblade said:
Did you try "Prophet Upgrade" tool? Before running the tool, you have to connect with activesync.
Click to expand...
Click to collapse
Yes, i've used Prophet Tools already...
I guess i'm doing something wrong... I've tried again now, and went again with the 3 color screen. I'm injecting a NoVendor Rom again.
When doing HardSPL, when the screen turns white, i must disconnect and reconnect device and just wait that software finishes, right? There is a moment that nothing happensm but then ActiveSync recognizes again the PPC.
I'm i right? I must do that again. It must be somtging that i'm doing wrong...
pt_satelite said:
When doing HardSPL, when the screen turns white, i must disconnect and reconnect device and just wait that software finishes, right?
Click to expand...
Click to collapse
When the screen turns white, I do nothing. Just wait. I don't disconnect and reconnect device. Maybe this is the problem. Do not touch the device when screen turns white. It will continue eventually. Also use the latest Prophet Upgrade tool v2.6.
Let's see what will happen.
keenblade said:
When the screen turns white, I do nothing. Just wait. I don't disconnect and reconnect device. Maybe this is the problem. Do not touch the device when screen turns white. It will continue eventually. Also use the latest Prophet Upgrade tool v2.6.
Let's see what will happen.
Click to expand...
Click to collapse
I got it! I've followed this: http://forum.xda-developers.com/showthread.php?t=349900&page=9
And now I have a brand new WM 6.5 in my old Prophet!!!!!
Thank you very much!
Nice to see you get your prophet back to life. I still use wm6.1. Because it is said wpa2 does not work with wm6.5. I haven't try wpa2, yet.
Best wishes.
keenblade said:
Nice to see you get your prophet back to life. I still use wm6.1. Because it is said wpa2 does not work with wm6.5. I haven't try wpa2, yet.
Best wishes.
Click to expand...
Click to collapse
That's a good question... as i live in a non populated wifi area, i use just WPA, and it's fine. I must try WPA2, to check that.
and btw, 6.5 rom from babak00000 is just great. Love it.
successfully send this cab to update 7720 to 7740. if see error message on PC don't worry, pls try many times.
warning: TouchXperience 1.6 beta won't work for 7740
EDIT: it just can be used for [ROM] Back to the Future [XBmod-Yuki] [7720 ready] [28/08]. Other rom can't use this method to update.
thanks for sharing
Its not good cab... After installing my phone reboots and it said SD card not working - changed or damaged :-(
Petulinek said:
Its not good cab... After installing my phone reboots and it said SD card not working - changed or damaged :-(
Click to expand...
Click to collapse
i think you didn't use [ROM] Back to the Future [XBmod-Yuki] [7720 ready] [28/08] this rom
joyqing said:
i think you didn't use [ROM] Back to the Future [XBmod-Yuki] [7720 ready] [28/08] this rom
Click to expand...
Click to collapse
Yes, this appendix wasnt in your post when i dowloaded cab :-(
What does 7740 bring you? First time I've heard of this version.
Internet Sharing
Is "internet sharing" working with this update?
Just updated, Great, not sure what any difference is but my phone is 7740 now
It fixes some of the Exchange Server issues that Build 7720 has and it also adds some improvements to the voicemail notification.
+ I guess: Internet sharing
=)
Helllo
Yhe senior member PETBEDE says that's
"Hi ALL.
HTC and SAMSUNG are PUSHING OUT UPDATE through ZUNE.
DO NOT UPDATE to that if by chance u have it cause it will CHANGE your BOOTLOADER(SPL) to 5.XX and making you not to be able to FLASH ROM.
I am using HTC HD7 the SPL is 5.10. Don't know what SAMSUNG will be but I do know u won't be ABLE to FLASH ANY ROM."
Any of you can confirm if in HD2 change number of bootloader
Thanks
Just applied this cab, no internet sharing whatsoever.
Rebooted phone and held down volume:
Code:
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x30
So I guess my bootloader is still intact.
updated my hd2 sucessful,
i'm on 7.10.7740.16 now. firmware revision 72250.21.40600.444, bootloader 0.96.2250.0.
internetsharing (settings-page activated with cab around here) doesn't work like before because of "wrong settings" my apn is set to web.vodafone.de
any idea what i can do to make it work??
malsehn said:
updated my hd2 sucessful,
i'm on 7.10.7740.16 now. firmware revision 72250.21.40600.444, bootloader 0.96.2250.0.
internetsharing (settings-page activated with cab around here) doesn't work like before because of "wrong settings" my apn is set to web.vodafone.de
any idea what i can do to make it work??
Click to expand...
Click to collapse
few weeks ago i have this problem with bootloader 0.96....
solution: simple turn off device. pull out battery and leave few minutes without battery. putt battery back and boot to bootloader... HSPL 2.08 must be back.... if not try without battery longer....
oh, not to get me wrong, my phone boots and runs correctly, just the internet sharing doesn't work... the bootloader info i wrote is just displayed in the phone's info page ...
[edit] ... oh, ok, you're right, it's displayed in bootloader-mode (tricolor-screen), too... will try your method now any further help with ics still appreciated..
Recently I have not been getting sms notification of voicemails.
This update seems to have fixed this issue.
Thanks
im successfully update to 7740. but there's no internet sharing setting.. any ideas? thanks
Beterry Life Anyone???
Does anybody know how well the battery performs under this new update?
tarmizizain said:
im successfully update to 7740. but there's no internet sharing setting.. any ideas? thanks
Click to expand...
Click to collapse
you can activate the ics toggle in the settings page with the xap on this thread (for instruction see the last sentence in first post)
but if switched to on, it will still pop up with a messsage
"Connecton not shared. There's a problem with the current settings" because of the lack of proper driver (firmware) updates
支持joy,感谢你的分享。。
malsehn said:
you can activate the ics toggle in the settings page with the xap on this thread (for instruction see the last sentence in first post)
but if switched to on, it will still pop up with a messsage
"Connecton not shared. There's a problem with the current settings" because of the lack of proper driver (firmware) updates
Click to expand...
Click to collapse
thanks. so, our poor HD2 will never be able to have internet sharing because of the driver.. is that it? that is sad.