Black screen bricked phone - Vibrant Q&A, Help & Troubleshooting

I think I have hard bricked my vibrant phone. I was trying to odin back to stock after being on MIUI and the screen now just goes black and nothing else. None of quick ways to get in to download mode have worked. The only sign of life is that it worms up after a while.
Have done using odin v1.3 on win7 64bit. I looked for a while at similar threads and most of them didn't apply to my case. And the rest were mostly unanswered. Oh, and none of the threads have valid links any more. My warranty is out and $200+ to send for repairs.
Any ideas if the USB JIG would work? My phone isn't hardware locked. Any thoughts?
Thanks, in advance.

which ways did you try to get into dl mode?

I've got a Jtag but have never used it on a blackscreen brick, I've seen 60% 70% thrown around, but each phone is different, Id go for 8 bucks first, 200 sounds awful high, Is that for samsung to reflash it?

ya, get a jig. if you can get into DL mode then all is golden (after you buy the jig)

I've had a black screen before where the phone got no life at all. I thought it was dead completely. Nothing would show up on the screen, no charge icon when plugged in, no power up, nothing!
I just didn't give up on download mode. I continued to do the - battery out > hold all buttons > plug in usb > battery in > and then in my head I did a silent count of what I thought would be the normal bootup time and when I should let go of the button. I must have gotten lucky I guess, cause after trying that about a dozen times it finally went into download mode. Mind you the phone screen was still black, the only way I knew I was in download mode was that ODIN connected to the device. Started the flash in ODIN and after completion, to my delight the phone booted up normally. I know it sounds ridiculous but that's how I fixed my black screen when I thought all was lost.
Good luck!

Thanks, everyone. I have already ordered the jig online and hopefully that works. I have been and will continue to try to get in to down load mode using the 3 button method.
I am using windows 7 64bit, Does that matter?

Closfig1 said:
which ways did you try to get into dl mode?
Click to expand...
Click to collapse
I had the GB boot loader installed so I used the power and volume up method to get into download mode.

kawika, I was in the same boat as you. My Epic was in the same catatonic state as yours and every post I could find through google said I was pretty much fscked. After cursing myself for hours and wishing that I kept everything stock, I found your post through google and I was saved. Thank you for resurrecting my expensive paperweight!!!

Related

[STICKY THIS] Solution to Fix Any Brick

If your phone was bricked in any way, but still shows something on the screen when powered on or plugged in, try this.
1. Take out battery, put it back in. (to turn the phone fully off)
2. Don't turn it the phone on!
3. Plug the phone into your PC, do not hit the power button!
4. See if the phone shows anything on the screen
IF the phone screen does show the battery charger or something else on the screen after being plugged in without you hitting the power button, so far so good.
5. Now while it's on like this, hold the volume up and volume down buttons.
6. Hold the power button as well as the volume buttons until the screen goes black.
7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons!
When done properly, this will always get you into Download mode. After that you should be able to use Odin to revert to stock, tar and instructions here:
http://forum.xda-developers.com/showthread.php?t=734475
This fixed my 'odd' bricks. Over and over again.
I'd say it's impossible to truly brick this phone.
I have been researching this most of the day, due to some testing I was doing, and the one thing I have come to realize is that this phone recovers well from "brick" it's not a true brick it's just scary. One of the posts I read, here on xda, said that unless the blue progress bar started advancing while using Odin, you can unplug, pull battery fairly safely.
davbran said:
I have been researching this most of the day, due to some testing I was doing, and the one thing I have come to realize is that this phone recovers well from "brick" it's not a true brick it's just scary. One of the posts I read, here on xda, said that unless the blue progress bar started advancing while using Odin, you can unplug, pull battery fairly safely.
Click to expand...
Click to collapse
Haha well that's exactly what happened to me. I flashed wrong with Odin and it failed halfway through, and I had no choice but to reboot the phone.
And when I did I got a truly odd screen. All I could see was a picture of a phone connected to an exclamation point connected to a laptop. That's it. Lol.
And I fixed it by doing this.
omg, i love you This totally fixed my problem XD
Everyone kept saying go to download mode, but no one ever said to "7. As soon as the screen goes black, let go of the power button! But DON'T let go of the volume buttons!"
super life saver... thanks alot
I actually did find someone else say to do that but it was out of luck as it was deeply buried. Don't remember where it was here lol
Its nice to have people who help us newbies
andershizzle said:
Haha well that's exactly what happened to me. I flashed wrong with Odin and it failed halfway through, and I had no choice but to reboot the phone.
And when I did I got a truly odd screen. All I could see was a picture of a phone connected to an exclamation point connected to a laptop. That's it. Lol.
And I fixed it by doing this.
Click to expand...
Click to collapse
Yea, last night I was messing around with the latest lag fix, but it ending up causing a lot of FC's, so I had to revert to stock a few times. I tried to make it work using ext2 and ext3, but it still wasn't stable enough. I didn't enjoy the noticeable speed increase, but it wasn't worth it since launcher pro was one of the programs that was FCing.
Anyways, so after I gave up for the 3rd time, I flashed stock using ODIN and it got stuck. I left it there for awhile with no progress and the phone's screen actually just went completely black. I pulled the battery and got the weird cell phone pointing to computer icon. I almost crapped my pants at that point. Very scary moment since I had not seen that screen before.
A quick google search for "bricked Vibrant" led me to this thread and voila! My Vibrant is alive and well again.
Thanks a bunch.
PS: After reflashing stock that many times, I still find it strange that after a fresh flash, I still get a noticeable speed boost by wiping the phone through the privacy setting. Not sure if it's a placebo effect, but I swear it makes a noticeable difference every time.
Maverick777 said:
Yea, last night I was messing around with the latest lag fix, but it ending up causing a lot of FC's, so I had to revert to stock a few times. I tried to make it work using ext2 and ext3, but it still wasn't stable enough. I didn't enjoy the noticeable speed increase, but it wasn't worth it since launcher pro was one of the programs that was FCing.
Anyways, so after I gave up for the 3rd time, I flashed stock using ODIN and it got stuck. I left it there for awhile with no progress and the phone's screen actually just went completely black. I pulled the battery and got the weird cell phone pointing to computer icon. I almost crapped my pants at that point. Very scary moment since I had not seen that screen before.
A quick google search for "bricked Vibrant" led me to this thread and voila! My Vibrant is alive and well again.
Thanks a bunch.
PS: After reflashing stock that many times, I still find it strange that after a fresh flash, I still get a noticeable speed boost by wiping the phone through the privacy setting. Not sure if it's a placebo effect, but I swear it makes a noticeable difference every time.
Click to expand...
Click to collapse
Glad I could help!
And that's intersting. I'll make sure to wipe the privacy settings. I actually haven't ever wiped them yet.
No go for me.
I used the stupid partition tool in rom manager. partitioned the internal memory not the sd card.
Saw a few others did this, and this worked for them, either right away or after flashing eugene's froyo rom then reverting back, but that rom just hangs on cache.fsd or something like that.
Trying to repartition through odin, with no download files selected right now. It does not appear to be doing anything, just set pit file, then do not turn off target in odin.
Will leave it for a bit, maybe try to flash this again, i think the issue might be deeper for me though. need kernel and everything else.
I did that but my phone locked up and now all I get is a picture of a yellow cation sign next to a little phone and pc pic.. anything I can do at this point or??
tried going into recovery and download mode but it wont let me past that screen.
Thank you so much for this, I received a replacement set 2 days ago and was playing around the the phone and I bricked it, it thought it was frozen so I pulled the batter and it bricked.
I followed your instructions and it works like a charm. What I did find though is that i can't seem you use odin on a mac even with a virtual machine. I had to use an actual PC.
tweezit said:
I did that but my phone locked up and now all I get is a picture of a yellow cation sign next to a little phone and pc pic.. anything I can do at this point or??
tried going into recovery and download mode but it wont let me past that screen.
Click to expand...
Click to collapse
This is exactly the screen I had. Follow my instructions exactly and you'll get into download mode (at least i did)
This should be made a sticky.
thank you thank you thank you
Sticky this thread.
Sent from my SGH-T959 using XDA App
Great find for all.
has anyone found a way to unbrick a flashed EU rom then the person flashed to US rom? and then the power wont come on? But the unit does get hot when plugged in?
Im trying to see if i need to jtag this thing. or if anyone had success?
Thanks
ok so my vibrant gave me the cell phone and computer screen i got it back in download mode. started odin to get it back to stock but no matter how long i let odin go nothing happens i got the files that i need for odin out of a thread on these forums and i have followed the directions to the letter and still nothing. any help some one can give would be great. thank you for your time.
How do I know if my phone is being picked up by Odin or being flashed?
did the same thing the clockwork partition wiped my internal memory
F**k!
woop guess im going to tmobile in the a.m. and playin the whole
idk what happened it wont turn on
thank god for the 14 day return policy!
I ran into "brick mode" myself 2 nights ago and could not get my phone into download mode. Any possible combo of volume key up/down and power had no effect. Just that phone exclamation point pc icon slowly blinking in the center of the screen. I did finally get it into download mode but it wasn't using any of the previously mentioned methods, so I'll add one more to the growing list to try. This one worked for me after almost 4 hours of experimenting.
BTW....my phone would never display the battery charging image when powered off and plugged in. Just this same annoying image.
Pull the battery. Put it back in. Hold the just the volume down button. Do not hold the power button. Plug in either a wall charger or USB cable. The cable will power up the phone and voila. I was in the download screen.
I also highly recommend the stock ROM from the thread
"[ROM] OFFICIAL T-Mo Vibrant JFD ODIN/Nandroid Backup Images 7/29/10 (Tested/Working)" In Vibrant > Vibrant Android Development
I tried another ROM found out on the internet and ended up with a shell that crashed and restarted every 60 seconds.
For those running into Odin stuck on a message about verifying the file system, I had no luck when the phone used COM3. I suggest moving your USB cable into different ports on your PC. Each new port will "install" a new instance of the phone using different COM ports. COM5 and COM6 both worked as I was reflashing the day away yesterday.

[Q] Stuck at "phone ! computer" - did I brick it?

I just tried to update my phone to JI6.. I was rooted, with no lag fixes or GPS fixes ever applied. Update didn't work, just left me at the "Vibrant" screen for 30+ minutes. I tried to fix with Odin and JI6 file, but I unplugged the phone while in download mode before Odin started. Now I'm stuck at the "phone ! computer" icon. I've tried holding both volume keys and power while the phone is plugged in to the computer and then inserting the battery, but this doesn't work. I've also tried holding them all down after it goes to that screen, and it reboots, but always comes back to the same screen.
Did I brick my Vibrant completely?
This has been posted 2 billion and a half times already. You can still get into download mode. Just do what you would normally do to get into download mode but hold the buttons for a little longer until download mode comes up. Seriously, please use the search button people.
Your problem is you shouldnt be touching power to get into download mode.
First open odin.
Remove battery, put battery back in
Hold voth volume keys, do not touch power. Then plug in usb. Continue holding volume keys for a few seconds.
Or the way you were doing it. Remove battery, plug in usb, hold only the volume keys, then put the battery back in.
Sent from my SGH-T959 using XDA App
i've tried this a million times, is there any other way to get passed the phone ! computer screen? i've tried every single combination of button holds, battery removes and usb plugging and nothing other that that screen will come up.
You are not bricked. Follow these steps EXACTLY:
1. remove battery, sim and sd
2. Open Odin
3. Connect usb to phone
4. Hold down both volume keys and power
5. but battery back in
6. once the screen blinks, let go of the power button
7. keep holding both volume keys until the downloading screen starts
8. Flash back to stock. I always go back to stock after something like this just to make sure that nothing got corrupted. Also check the re-partition option.
9. Point and laugh at your phone with an evil henchman kind of laugh. The bastard didn't defeat you yet!!!
no luck doing that, only ever shows the phone ! computer screen
c0wb0ycliche said:
no luck doing that, only ever shows the phone ! computer screen
Click to expand...
Click to collapse
then it sounds like you have a hardware locked Vibrant. Time for a warranty replacement.
c0wb0ycliche said:
no luck doing that, only ever shows the phone ! computer screen
Click to expand...
Click to collapse
maybe you have one of the defected ones which people have been calling "hardware locked" if thats the case call tmobile and exchange it. they're getting hundreds of calls on this with various errors, nobody will suspect one more.
c0wb0ycliche said:
i've tried this a million times, is there any other way to get passed the phone ! computer screen? i've tried every single combination of button holds, battery removes and usb plugging and nothing other that that screen will come up.
Click to expand...
Click to collapse
please keep us updated as to what happens. I had the same problem with my first Vibrant but I had borked it with Voodoo. Even though I COULD get into download mode, ODIN would never work to fix it, even with repartition checked. It would just say "DO NOT UNPLUG TARGET!" and stayed there for hours. For this reason I am VERY leary of using ODIN again. Luckily, my local T-mo was nice enough to replace the phone for me, no questions asked.
I really want to find a ROM or something I can flash with clockwork to get me back on the JFD baseband because I have a stock kernel and a nandroid that is stock with root, then I can just use the 1-click unroot and do the OTA and not have to use ODIN. At least that's my theory
Just keep trying it
I had this problem yesterday I unplugged early while doing a odin flash and because Odin had stopped responding then when I pulled the battery and tried to start the phone I kept getting the phone ! Computer notification on my phone what I did was pulled the battery and connect the phone to the usb cable and hold the up and down volume keys at the same exact time I was plugging it in. the phone looked like it was going to showed a loading screen like the battery icon was about to pop up but it then went black and the download screen popped up... Ta Da... Don't give up so easy I didn't get it on my first time either took me about 45 minutes before I got it to work download mode is tricky even without a soft brick my friend so just keep swimming
Please Help me
I have the same problem, and hardware locked. i bougth from other guy in craiglist, T-mobile say cant do nothing for me, because the IMEI number is of the other account not me. and the guy dont respond my calls. the phone is 10/10 new. just try update with odin and this has bricked.
somebody can help me with ideas
Try this, it is slightly different from what the guy earlier said..
1.) Take off your back cover, remove your sim & mirco sd card.
2.) Remove your battery.
Make sure you have Odin OPEN with admin privileges!
Make sure you have the USB plugged into your PC but NOT your phone!
3.) Hold the volume buttons.
4.) Put the battery in.
5.) Put the USB in.
Continue holding the volume keys & you should pop into DOWNLOAD mode within a few seconds
It worked for me when I did this.
Ps.. Put this in the Q&A section next time
Masterâ„¢ said:
Ps.. Put this in the Q&A section next time
Click to expand...
Click to collapse
NO! We don't flame him until AFTER we fix his problem.
rudeguy said:
NO! We don't flame him until AFTER we fix his problem.
Click to expand...
Click to collapse
Did I flame? ahha get out
I wish the mods were faster on moving this stuff. how many "my phone has problems" threads have come up in development now?
jeez.
designerfx said:
I wish the mods were faster on moving this stuff. how many "my phone has problems" threads have come up in development now?
jeez.
Click to expand...
Click to collapse
easy fix:
Don't click on them
designerfx said:
I wish the mods were faster on moving this stuff. how many "my phone has problems" threads have come up in development now?
jeez.
Click to expand...
Click to collapse
Last i heard there is only one active mod for the vibrant forum, and he's a hardworking dev as well, they are taking apps for more mods, if you meet the criteria.
Sent from my SGH-T959 using XDA App
Br1cK'd said:
Last i heard there is only one active mod for the vibrant forum, and he's a hardworking dev as well, they are taking apps for more mods, if you meet the criteria.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
funny part:
His first post was a "help me" post not in the Q&A forum
http://ip208-100-42-21.static.xda-developers.com/showpost.php?p=4563336&postcount=7744
wildklymr said:
maybe you have one of the defected ones which people have been calling "hardware locked" if thats the case call tmobile and exchange it. they're getting hundreds of calls on this with various errors, nobody will suspect one more.
Click to expand...
Click to collapse
Personally i don't believe the hardware locked issue, i got mine in late August, has the same manufacturing date as many others who claim to be locked, and I have never had an issue getting into recovery or dl mode. There is a ton of information out there on this, seek and ye shall find, just be ready to do a ton of reading, take your time and don't get frustrated. Its OK to walk away and take a break, do something else for a bit and recharge your mental.
Masterâ„¢ said:
Try this, it is slightly different from what the guy earlier said..
1.) Take off your back cover, remove your sim & mirco sd card.
2.) Remove your battery.
Make sure you have Odin OPEN with admin privileges!
Make sure you have the USB plugged into your PC but NOT your phone!
3.) Hold the volume buttons.
4.) Put the battery in.
5.) Put the USB in.
Continue holding the volume keys & you should pop into DOWNLOAD mode within a few seconds
It worked for me when I did this.
Ps.. Put this in the Q&A section next time
Click to expand...
Click to collapse
This way works, i also have had success switching steps 4 and 5, usb first then battery, keep trying until you get it.
Sent from my T959 running bionix1.7 with JACs OC/UV and Voodoo
I was getting the phone vs computer screen last night. I had flashed the J16 official tar using Odin. Everything went perfect. Phone restarted at 1st try with no issues. I then re-rooted phone again with no problems. Then I went to load the segmented battery icon. When the phone booted up, I got FC messages and it wouldn't actually get to the home screen. I decided to reflash J16 and Odin failed. The screen went from the download screen to a black screen. I had to pull the battery and try again. When I tried to put it in download mode again, I got the phone~pc screen. I just did a battery pull again and when I tried again, I got the phone~pc screen again but I just kept holding the volume and power buttons and it eventually went into download mode again. That time I was successful in loading J16. I re-rooted and left it at that.
--WHEW--

Vibrant won't do turn on

I tried to upgrade to froyo using the odin method from this thread http://forum.xda-developers.com/showthread.php?t=853950. After everything was successfully done my phone shut off and now it won't turn on. I don't get a battery charge screen or anything. The phone's just blank.....
First, Get the Shipping rom (pit and tar files) so you can ODIN back to stock
Be sure you have the newest version of ODIN
Then remove the battery, plug the USB to the PC.
Now put the battery back.
Press both vol keys (up and down) and hold.
That should get you in Download Mode.
If it does not work, take battery out, unmplug USB.
Put battery back and try again to go into download mode.
Now you put the wrong version of froyo, if your keys maps are changed you may be screwed
If so, good luck! You are gonna need a lot of research to see if you can save it
i think i'm screwed.....nothing is working
If anyone else could help me with this, it would be great. I'm in between a rock and a wall right now with my phone.
you flashed the wrong rom. You didn't know that, did you?
iynfynity said:
you flashed the wrong rom. You didn't know that, did you?
Click to expand...
Click to collapse
No I didn't know that sadly. Is there anyway I can save my phone?
Hehehehe...I bricked mine yesterday. I disabled voodoo via Voodoo Toggle and waited for Linda to convert. I loaded up Odin and put in my pit & tar for JFD, which I always use, and hit start. I was on Nero v3 going to flash Nero v4 when it came out. I got a Fail part of the way through. The phone won't power on at all.....A popup says Windows can't recognize the device plugged into usb...
I think people are confusing things here and there...if your phone won't power on at all, you can't get help...you can't get into download mode to odin or recover it.
Like mine, for instance, there is no amount of times taking the battery out or doing this or that is gonna fix it..We need to read the post before we try to offer help...IF IT WON'T POWER ON how can people post ways to ODIN or RECOVER...
I'm just sayin....
jmcghee1973 said:
Hehehehe...I bricked mine yesterday. I disabled voodoo via Voodoo Toggle and waited for Linda to convert. I loaded up Odin and put in my pit & tar for JFD, which I always use, and hit start. I was on Nero v3 going to flash Nero v4 when it came out. I got a Fail part of the way through. The phone won't power on at all.....A popup says Windows can't recognize the device plugged into usb...
I think people are confusing things here and there...if your phone won't power on at all, you can't get help...you can't get into download mode to odin or recover it.
Like mine, for instance, there is no amount of times taking the battery out or doing this or that is gonna fix it..We need to read the post before we try to offer help...IF IT WON'T POWER ON how can people post ways to ODIN or RECOVER...
I'm just sayin....
Click to expand...
Click to collapse
Well right now I'm simply trying to get the phone to turn on which it won't, I was not asking for help to odin or recover. I was trying to ask if anyone else had this problem and if my phone is totally killed or if there's a possibility that i can save it. But thanks for your 2 cents.
Me too
I had ordered Samsung Vibrant Unlocked from T-Mobile USA around a month back. I am well past the 30 day replacement now.
I Rooted it updated to Axura 2.2.5.9
After all the procedure got completed, I rebooted the phone and now it just won't start at all.
My piece is Hardware Locked wherein I can't get into the Recovery Mode, but can get into the Download Mode. But I am not even able to get into the Download mode now.
It just won't freaking turn on.
If I send it over for repair, as the phone is a rooted one, will I void the warranty ?
Please reply quickly. I am starting to freak out.
OK... I want to be the first to eat my words here!!!!!
I tried one last time...just now
I took everything out and only held the volume keys. I plugged in the USB cable to the PC and then to the phone & put the battery in and BAM!!!!! it came on in Download mode
This way has NEVER worked for me without holding the power button. This phone was in all senses of the word "DEAD". I figured I would give it a try with just the volume keys.
jmcghee1973 said:
OK... I want to be the first to eat my words here!!!!!
I tried one last time...just now
I took everything out and only held the volume keys. I plugged in the USB cable to the PC and then to the phone & put the battery in and BAM!!!!! it came on in Download mode
This way has NEVER worked for me without holding the power button. This phone was in all senses of the word "DEAD". I figured I would give it a try with just the volume keys.
Click to expand...
Click to collapse
lol you must be very happy after that, good to great that.
Sent from my SGH-T959 using XDA App
jmcghee1973 said:
OK... I want to be the first to eat my words here!!!!!
I tried one last time...just now
I took everything out and only held the volume keys. I plugged in the USB cable to the PC and then to the phone & put the battery in and BAM!!!!! it came on in Download mode
This way has NEVER worked for me without holding the power button. This phone was in all senses of the word "DEAD". I figured I would give it a try with just the volume keys.
Click to expand...
Click to collapse
I got the same issue and this isn't working for me.
are there any other ideas?
it is completely dead. I am using a new battery and a known good usb cable to the computer.
I have tried holding all three buttons...just the vol up and down...vol up and power...etc... and nothing.
I even created that little JTAG thingy that I found on YouTube...that did nothing also
Different Situation
I have a similar problem with my Vibrant.
I reset my battery stats and also disabled VooDoo lagfix, and after i tried to reboot the phone, it froze on the vibrant screen.
I tried using soome of the methods that you guys posted before me, but then after i turn it on it shows an icon that there is a connection problem between the phone and PC.
I CAN turn on the phone, is there a way to just like reset everything? and if so how?
Thanks!
IClassStriker said:
I have a similar problem with my Vibrant.
I reset my battery stats and also disabled VooDoo lagfix, and after i tried to reboot the phone, it froze on the vibrant screen.
I tried using soome of the methods that you guys posted before me, but then after i turn it on it shows an icon that there is a connection problem between the phone and PC.
I CAN turn on the phone, is there a way to just like reset everything? and if so how?
Thanks!
Click to expand...
Click to collapse
If your phone powers on at all, you should be able to get into DL mode. Follow the instructions on how to revert to stock via ODIN.
In reply to the OP, if you tried the download mode method:
connect phone to usb
pull out battery
hold both volume sticks
put in batttery
and the phone still does not turn on even after multiple tries , well you're a bit screwed. But, Samsung cannot detect if the phone has been rooted if it cannot even turn on. Just tell them the Kies Mini update bricked the phone.
omg leave ur phone on charger for 10 min, pull battery out when hooked up to charger put battery back in , let sit for few min pull battery out hook up phone to computer hold vol up vol down pop battery in , helped ? np this has been answered gazilion times in other threads
btw it takes few try this way to get it back up running so dont stop on first , hey .
If you have the phone!pc problem..connect to odin & see if your showing a COM port .... just flash pit & tar if you do. Without download mode
Sent from Bionix V powered Vibrant
my phone shut off and now it won't turn on. I don't get a battery charge screen or anything. The phone's just blank.....
If you have the phone!pc problem..connect to odin & see if your showing a COM port .... just flash pit & tar if you do. Without download mode
yes u do that it makes sense lol
gmoney007 said:
I got the same issue and this isn't working for me.
are there any other ideas?
it is completely dead. I am using a new battery and a known good usb cable to the computer.
I have tried holding all three buttons...just the vol up and down...vol up and power...etc... and nothing.
I even created that little JTAG thingy that I found on YouTube...that did nothing also
Click to expand...
Click to collapse
You're talking about a DIY Jig. A JTAG is completely different. They cost $150-300. You can pay to have a local repair shop jtag it for around $50 or send it to Samsung to repair/replace. I'm still trying to find out how much Samsung would charge for the repair if it's deemed out of warranty.
If your phone refuses to turn on no matter what you do and it gets warm or hot if you leave the battery in it, read on:
I hope my suggestion is not too late. I was in the situation before. I tried everything everyone said here and somewhere else. None of them works.
The reason that those methods don't work because you cannot get to download or recovery mode or even the pc-phone screen since your phone won't turn on. The reason that your phone doesn't turn on because the bootloader has been messed up. A jig will work only if your phone can be turned on somehow.
Three possible solutions:
1. Repair or replace it with T-mobile, or
2. Get someone to repair it with a riff box or other similar tool, or
3. Get the box and fix it yourself (not recommended if you are not familiar with electronic stuff.)
This is the link for the same problem you have; this guy bought the box and has his phone fixed himself. If you live in US, he may do it for you if you have no place to go. It does hurt to ask.
http://forum.xda-developers.com/showthread.php?t=974862&page=6

Dead vibrant, nothing on screen, no DMode! Help!!

Hi,
I'm going to keep it as short as I can, just bought a vibrant and rooted in a nice way, then I tried to use odin to update from 2.1 to 2.2, it did it but then the screen goes black and it doesn't shows anything and when i say anything I really mean it, no battery when I plug it, and no brick message. Then I discovered that I used the wrong image to try and update it the one for the i9000
note:
i tried to put it on download mode, but as i said before it doesn't do anything is literally dead it, i think I'm going out of options i got no idea what to do anymore, PLZ SOMEONE GIVE ME SOME HOPE!!!
Two options
1) Go to radio shack, spend a few bucks and build a custom USB jig that will get you into download mode. The thread is here somewhere in the forums, search for it.
2) http://forum.xda-developers.com/showthread.php?t=1277056
UnBrickable Mod is awesome! It's easier to upload download mode with a click then to hold buttons.
SamsungVibrant said:
Two options
1) Go to radio shack, spend a few bucks and build a custom USB jig that will get you into download mode. The thread is here somewhere in the forums, search for it.
2) http://forum.xda-developers.com/showthread.php?t=1277056
Click to expand...
Click to collapse
I did one myself, and tested on a friend captivate, but my vibrant still the same NOTHING!, i mean wtf! the only thing it could have is a software/firmware problem but it seems he completely died on me!! :/
I had a bad cable once and had a odin flash go wrong..
Started out with download mode, but with no luck connecting to pc via 2 diff computers (not realizing it was the cable at the time) I kept messing around with it, sometimes connecting, then Odin screwing up again and eventually got to your point...nothing whatsoever, DEAD
After a while...called TMO and ordered a replacement...but didn't give up, I kept on with cable to phone, then pc...vice versa...battery in/out..and eventually out of nowhere it came back on..no idea how..one thing I do remember is reading to use vol up+down, but for me there was some weird combo where I think i started with up+down, then let go of up(kept holding down, or just used vol down)..can't quite remember...but don't give up..again mine was dead dead dead...somehow she came back...keep trying different things no JIG...
EDIT: Take your micro sd out of the phone and sim card too...that much i do remember...
accordex said:
I had a bad cable once and had a odin flash go wrong..
Started out with download mode, but with no luck connecting to pc via 2 diff computers (not realizing it was the cable at the time) I kept messing around with it, sometimes connecting, then Odin screwing up again and eventually got to your point...nothing whatsoever, DEAD
After a while...called TMO and ordered a replacement...but didn't give up, I kept on with cable to phone, then pc...vice versa...battery in/out..and eventually out of nowhere it came back on..no idea how..one thing I do remember is reading to use vol up+down, but for me there was some weird combo where I think i started with up+down, then let go of up(kept holding down, or just used vol down)..can't quite remember...but don't give up..again mine was dead dead dead...somehow she came back...keep trying different things no JIG...
EDIT: Take your micro sd out of the phone and sim card too...that much i do remember...
Click to expand...
Click to collapse
thx for the ray of hope pal but I think i'll just sell ir or something anyway doesn't hurt to keep trying until it happens, i have seen mostly 2 kind of options on internet the buttons combo and the jig tried them both nothing seems to work, I just think i have no luck, i bought the cell and 48h later it was already dead.....anyways thx to the people who bothered to answer me
Options:
1.you can call TMO for replacement.
2. Let the technician open it maybe there's something wrong wid d digitizer
3.Have you heard about the JTAG? It can resurrect your phone!
Djhemz07 said:
Options:
1.you can call TMO for replacement.
2. Let the technician open it maybe there's something wrong wid d digitizer
3.Have you heard about the JTAG? It can resurrect your phone!
Click to expand...
Click to collapse
UnBrickable mod is way better than JTAG. You should check it out. JTAG works once. UnBrickable mod allows software based recovery always and works on a dead brick with no special tools once its applied.
There two videos on the portal now which mention it. I'd like to think people are using it.. after all, this mod doesn't just happen. It takes someone to put in the work to research it... ahem...
option 1
--------
1. remove the sim-card and the memory card
2. remove the battery
3. connect the USB cable to the computer and to the cellphone (still no battery).
4. press on both volume buttons (volume up+volume down)
5.while you press on the buttons enter the battery into the cellphone.
option 2
--------
1. connect the USB cable to the computer and to the cellphone
2. press on both volume buttons (volume up+volume down)
3. press and hold the power button
4. the screen will dim - keep pressing on the buttons (3 of them)
5. the screen will show up the cellphone-computer picture - keep pressing...
6. the screen will dimm again - keep pressing
7. the screen will show up with the vibrant logo
8. leave the buttons - now the cellphone should enter to download mode
AdamOutler said:
UnBrickable mod is way better than JTAG. You should check it out. JTAG works once. UnBrickable mod allows software based recovery always and works on a dead brick with no special tools once its applied.
There two videos on the portal now which mention it. I'd like to think people are using it.. after all, this mod doesn't just happen. It takes someone to put in the work to research it... ahem...
Click to expand...
Click to collapse
sounds interesting i'll try those method anyone mind sending me the links?? btw how am i supposed to connect my phone onto the PC if it doesn't start which means it doesn't get recognized???? and a friend told me that i ****ed the Boot load does it fix that too??
vicmelgen said:
sounds interesting i'll try those method anyone mind sending me the links?? btw how am i supposed to connect my phone onto the PC if it doesn't start which means it doesn't get recognized????
Click to expand...
Click to collapse
Just connect it to the pc even if it doesn't recognized
Sent from my GT-I9000 using XDA App
did you try this?
battery out...
battery in--> hold only vol UP and power? for a few seconds

[Q] Black Screen Brick Vibrant

Hello,
Don't know if this has been asked but I have been looking for it for a while. Cant seem to fine a solution.
I flashed my phone wrong with hemdall now my phone wont turn on. Screen completely black i reboot pulled out the battery everything I can think of can you give me a suggestion. I was thinking about buying a USB Jig.
I'm in the same boat and I bought the Jig. However I think Josh just acts as a middle man on this one and shipping is actually from overseas. But you can find it here. http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-download-mode-jig/ I suggest a little extra shipping cost.
However the other suggestion if that is not working (I think I killed my phone) is to have Josh do a Jtag on the phone. You can find that at http://mobiletechvideos.mybigcommerce.com/samsung-vibrant-jtag-brick-repair/
Can you get into download mode? Remove battery, plug usb, press up+down vol buttons and insert battery.
hey i having same problem but i could see the vibrant samsung screen but my phone won't pass that and like you say about the usb cable and then plugging the battery i can do that as well but how can i get my phone back and running another rom!!!
Monster809 said:
hey i having same problem but i could see the vibrant samsung screen but my phone won't pass that and like you say about the usb cable and then plugging the battery i can do that as well but how can i get my phone back and running another rom!!!
Click to expand...
Click to collapse
If you can see the Vibrant Samsung screen just use Odin to flash back to stock
Kabiigon said:
Hello,
Don't know if this has been asked but I have been looking for it for a while. Cant seem to fine a solution.
I flashed my phone wrong with heimdall now my phone wont turn on. Screen completely black i reboot pulled out the battery everything I can think of can you give me a suggestion. I was thinking about buying a USB Jig.
Click to expand...
Click to collapse
The real solution here i doing a JTAG to your phone or make the Unbrickable MOD (It's very dangerous, a person with Welding and electronic skills must do this).
Another thing you can do is buy a broken Screen phone from Ebay (it more cheaply) and change the motherboard!!
My suggestion would be to continue to try to get into Download mode on the phone. My phone was DEAD no life at all plugged into the wall or PC. I kept trying to get it into download mode and magically after hours of failures, ODIN recognized the device! The phone was still DEAD no life at all on the screen but ODIN had recognized that my device WAS indeed connected. So I continued to flash back to stock and as always with a little patience ODIN was there to save me. The phone automatically rebooted after ODIN was done and BOOM! Good2Go
Goodluck!
^^I'm gonna try that and hopefully with some patience it will work. Otherwise I'm also gonna be ordering a jig, they're not that expensive. My problem is the same as the OP's. My vibrant will just not give any signs of life. I was trying to odin to stock from one cosmics ics RC3.1. Wanted to start on a fresh install for AOKP build 25. But then odin decided to fail on modem.bin. then it just hung and phone turned off, haven't been able to turn it on since. I've spent the last two hours trying to put in different combinations and keys and usb attachments to bring any hints of life, but so far nothing. Bootloader update was not checked on odin so I'm pretty confident that its not due to bootloader mismatch but someone correct me if I'm wrong. Sending it back to samsung or tmobile is very far of an option since I've modified the phone to add FFC. If anyone has any advice or hints it would be greatly appreciated. I'm kind of hating myself and flashing now since I was very happy with the rom that I had and how everything was setup. I just wanted to try something new for fun and this went and blew everything up.
^^I literally held down the buttons > plugged in the cord > put in the battery > and counted in my head the amount of seconds it took the phone to "normally" boot to where I would "normally" let go of the power button to get into Download mode, lol I know it sounds ridiculous but that's how I did it. It helped that I had my sisters working Vibrant right there, I used her phone to get into download mode and timed the process and used that as a baseline for the timing of trying to get the "DEAD" Vibrant into download mode.
If all else fails a JTAG as mentioned should fix your problem fosho!
Goodluck!
Ye I fixed it. One day I did what I had been doing the whole time and it just decided to work. Got into download mode then went back to stock. Our phone is so freaking weird yet I love the damn thing. It really is unbrickable. To anyone in this situation just never give up.
Sent from my SGH-T959 using XDA App

Categories

Resources