Related
I have an LG Optimus One running 2.2.2 latest firmware V10e. Recently, I rooted my device and installed ClockWorkMod Recovery and the Lagfix+OC Kernel by der_caverman. I am using the Stock ROM with that Kernel.
My question is when the official Gingerbread Update comes out by LG, will I be able to update it with the official LG software updater or will it not work because I have ClockWorkMod Recovery installed.
If not, how can I remove ClockWorkMod Recovery get my original Recovery Back???
any help would be appreciated!
I already asked the same question
the thread: http://forum.xda-developers.com/showthread.php?t=1102423
the solution: http://forum.xda-developers.com/showthread.php?p=13396506#post13396506
good luck
lonerguy said:
how can I remove ClockWorkMod Recovery get my original Recovery Back???
any help would be appreciated!
Click to expand...
Click to collapse
go to http://forum.xda-developers.com/showthread.php?t=1065197
or
http://www.megaupload.com/?f=XGKNWZQJ
you can just flash any recovery given above.its a zip file just flash the zip as you flash roms.one of the links contains original recovery for p500.
thanks...it worked
thank you guys...
If the phone is just 'rooted' and no custom ROM, would one need to follow the above steps before upgrading? Thanks
siva-kumar said:
If the phone is just 'rooted' and no custom ROM, would one need to follow the above steps before upgrading? Thanks
Click to expand...
Click to collapse
nope. you can upgrade at any time if u are staying with ur oem rom even if u are rooted. only thing is that u will lose ur root previllage after the update.
its alwayes advisable to have a custom recovery and custom rom. cause it can take nandroid backups(will save your day if anything goes wrong)
josinpaul said:
nope. you can upgrade at any time if u are staying with ur oem rom even if u are rooted. only thing is that u will lose ur root previllage after the update.
Click to expand...
Click to collapse
Can you please tell me can I upgrade without doing anything??? I have rooted my phone and installed AmonRa recovery, and I'm on stock rom 2.2.2 10e (I have just flashed some framework that I made on UOT kitchen).
zekozeko said:
Can you please tell me can I upgrade without doing anything??? I have rooted my phone and installed AmonRa recovery, and I'm on stock rom 2.2.2 10e (I have just flashed some framework that I made on UOT kitchen).
Click to expand...
Click to collapse
it is risky since you have changed the frame work.if i were you i will do the following.
1)unroot the phone( if u have used gingerbreak use the same to unroot)
2)down load the original recovery from http://www.megaupload.com/?f=XGKNWZQJ and flash. thus u can getrid of amonra and get back original p500 recovery
3)reboot and hard reset and upgrade.
4) since u are now on original recovery and in unrooted condition if any thing goes wrong u can claim warrenty.
let me ask u why u need an upgrade? to get lot of crapwares? or to get amere 600mhz kernal? or to get a laggy phone with mere 60 mb of internal storage space to install all ur apps? or to have adds on every apps?
go for http://forum.xda-developers.com/showthread.php?t=946354
its stable,beautiful,oced and updated gingerbread.
Thanks for your answer!
And I understand you when you ask me why do I need official update, because I agree that official rom = creap And thats why the first thing that I have done when I rooted my phone was to uninstall all the bloatware from it
I will for sure flash miks rom when he base it on official gingerbread, and if I have a little time for weekend current mod that you recommended (I only hesitate because of the bugs - I know there are just a couple of them, but...). I tried yesterday francos kernel v151, but I'm experiencing color bending in lower half of a screen with it...
zekozeko said:
Thanks for your answer!
And I understand you when you ask me why do I need official update, because I agree that official rom = creap And thats why the first thing that I have done when I rooted my phone was to uninstall all the bloatware from it
I will for sure flash miks rom when he base it on official gingerbread, and if I have a little time for weekend current mod that you recommended (I only hesitate because of the bugs - I know there are just a couple of them, but...). I tried yesterday francos kernel v151, but I'm experiencing color bending in lower half of a screen with it...
Click to expand...
Click to collapse
ya its up to you to decide...and i agree with u absolutly.but i aint had any problems with mik's 6.5.2(not using francos ker cause some error with cpu freq settings, u have to use setcpu).
Just one more question - when you said:
2)down load the original recovery from http://www.megaupload.com/?f=XGKNWZQJ and flash.
Click to expand...
Click to collapse
you mean to flash it from amonra recovery, right? (I know, it's a noob question, but better to be safe then sorry
zekozeko said:
Just one more question - when you said: you mean to flash it from amonra recovery, right? (I know, it's a noob question, but better to be safe then sorry
Click to expand...
Click to collapse
yes its a flashable unsigned zip.but if u r using amonra to flash( cause it is unsigned) u have to uncheck the option "toggle signature verify" first.Amonra wont allow u to flash unsigned zips unless u do the above.
ps:if original recovery is flashed u will lose all the options in amonra and the only option will be the hard reset option.
there is a good how to section if u wish...
http://tablet-crunch.blogspot.com/2011/01/lg-optimus-t-rooting-recovery-rom.html
http://forum.xda-developers.com/showthread.php?t=1007244
http://forum.xda-developers.com/showthread.php?t=901247
I'm Newbie, and I'm using LG Optimus Z ( know as LG KU9500/SU950 ). I want install ClockworkMod to recovery rom. It run android 2.2.2
Show me please.
Thanks every one very much.....
Dear reader,
I've been trying to root my phone for a couple of days now. (Sony Xperia Ray ST18i)
I've browsed to numerous forums/websites in search of a good tutorial/guide to help me do it.
Finally i've managed to find youtube clips which helped me step by step to getting it done.
First thing i did was this:
How to unlock BootLoader on Xperia Ray[Official 4.0.4 ICS]
[Can't post links on here yet because of the spam block. If you look for the title on youtube, you should be able to find it]
I already encountered my first problem there. I wasn't able to unlock bootloader on my android 4.0.4 so i downgraded my phone to gingerbread 2.3.4. After that i repeated the unlock bootloader tutorial and i succesfully managed to unlock it.
After this i tried to root my phone with the easy rooting kit v.1.0
This worked but after turning my phone on, i noticed that the phone wasn't actually rooted yet.
After contacting the person who made the bootloader video, he told me that i had to flash my kernel. So i went ahead and used another of his video tutorials. (don't mind his english accent btw)
How to flash costum kernel[Sony Xperia Ray]
[Can't post links on here yet because of the spam block. If you look for the title on youtube, you should be able to find it]
Now this, running with gingerbread 2.3.4. worked without a problem and i currently have a custom kernel installed onto my phone.
This is where i run into my problem.
According to his next video tutorial:
How to root Xperia Ray
[Can't post links on here yet because of the spam block. If you look for the title on youtube, you should be able to find it]
He shows that you need to be in your phone's regular menu, in order to root your phone with the easy root kit made by DooM.
My problem is that i currently am stuck in the phone kernel menu. When i try to let my phone load up normally, it just keeps rebooting.
The kernel menu btw looks exactly the same like the one shown in the link below:
Xperia play (HOW TO ROOT, FLASH KERNEL, FLASH ROM )
[Can't post links on here yet because of the spam block. If you look for the title on youtube, you should be able to find it]
Now i've tried my best to be as detailed as possible with what my current situation is.
My question would be: What am i doing wrong and how can i root my phone from where it is right now, because as it stands. I'm unable to use my phone.
Kind Regards,
Cashtecz
ps. ( i did a quick search on the forums but i haven't come across as post that shares the same problem as i have)
Don't worry... We all make mistakes.. The, problem seems to be with the kernel you've flashed.... I've found two guideshttp://forum.xda-developers.com/showthread.php?t=1424121&highlight=kernel
http://forum.xda-developers.com/showthread.php?t=1544513&highlight=kernel
Or you can revert back to stock ics http://talk.sonymobile.com/thread/35239..
Sent from my WT19i using xda app-developers app
rachit.rc96 said:
Don't worry... We all make mistakes.. The, problem seems to be with the kernel you've flashed.... I've found two guideshttp://forum.xda-developers.com/showthread.php?t=1424121&highlight=kernel
http://forum.xda-developers.com/showthread.php?t=1544513&highlight=kernel
Or you can revert back to stock ics http://talk.sonymobile.com/thread/35239..
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
Thank you for responding, i tried to first link and managed to root my phone succesfully.
I'm so happy!
Thanks again so much
cashtecz said:
Thank you for responding, i tried to first link and managed to root my phone succesfully.
I'm so happy!
Thanks again so much
Click to expand...
Click to collapse
Oh one more question.
Is it possible, after rooting my phone to update my android to the latest version?
The current rom that i'm using doesn't have google play store in it, and i would like to have it so i can install apps such as whatsapp.
Sincerely,
cashtecz said:
Oh one more question.
Is it possible, after rooting my phone to update my android to the latest version?
The current rom that i'm using doesn't have google play store in it, and i would like to have it so i can install apps such as whatsapp.
Sincerely,
Click to expand...
Click to collapse
If your bootloader is unlocked, not via pc companion or over the air.
On which rom are you currently on?
Normally you do a backup with for example titanium backup and flash the custom kernel, install the custom rom and restore the titanium backup...
P.S.: For every android version there is a zip file which contains the "gapps" (google apps like playstore) which you can flash with clockworkmod
mihahn said:
If your bootloader is unlocked, not via pc companion or over the air.
On which rom are you currently on?
Normally you do a backup with for example titanium backup and flash the custom kernel, install the custom rom and restore the titanium backup...
P.S.: For every android version there is a zip file which contains the "gapps" (google apps like playstore) which you can flash with clockworkmod
Click to expand...
Click to collapse
Hello,
http://forum.xda-developers.com/showthread.php?t=1424121&highlight=kernel
That's the page where i got my rom as well as the kernel from.
On that thread, it says that there is supposed to be a gapps package in the zip, but for me, it's not there.
Kind Regards,
cashtecz said:
Hello,
http://forum.xda-developers.com/showthread.php?t=1424121&highlight=kernel
That's the page where i got my rom as well as the kernel from.
On that thread, it says that there is supposed to be a gapps package in the zip, but for me, it's not there.
Kind Regards,
Click to expand...
Click to collapse
They say, you should download them from CM 7.2 thread. Just look here and select the lastest apps for gb (gingerbread) (or just look here).
Flash via cwm (install zip from sd card)
cashtecz said:
Hello,
http://forum.xda-developers.com/showthread.php?t=1424121&highlight=kernel
That's the page where i got my rom as well as the kernel from.
On that thread, it says that there is supposed to be a gapps package in the zip, but for me, it's not there.
Kind Regards,
Click to expand...
Click to collapse
http://goo.im/gapps/gapps-ics-20120429-signed.zipflash in cmw
Sent from my WT19i using xda app-developers app
rachit.rc96 said:
http://goo.im/gapps/gapps-ics-20120429-signed.zipflash in cmw
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
They are for ics, but he needs gingerbread gapps (CM7.2)!
mihahn said:
They are for ics, but he needs gingerbread gapps (CM7.2)!
Click to expand...
Click to collapse
Now if i understand it correctly, i need to find gingerbread gapps Cm.7.2 then reboot my phone into recovery mode and install that zip file?
cashtecz said:
Now if i understand it correctly, i need to find gingerbread gapps Cm.7.2 then reboot my phone into recovery mode and install that zip file?
Click to expand...
Click to collapse
Yes and no, the gapps aren't specific for cyanogenmod, just use the link i posted. Flash them, but rachit.rc96 posted an invalid link, cause they were for ics...
Here again: Download here and flash via recovery AFTER you had installed cm7!
mihahn said:
They are for ics, but he needs gingerbread gapps (CM7.2)!
Click to expand...
Click to collapse
Oh.. Thank you
Sent from my WT19i using xda app-developers app
---------- Post added at 08:57 PM ---------- Previous post was at 08:55 PM ----------
cashtecz said:
Now if i understand it correctly, i need to find gingerbread gapps Cm.7.2 then reboot my phone into recovery mode and install that zip file?
Click to expand...
Click to collapse
sorry I didn't know that you were using gb.. Use the. Link mihahn head posted.. You can also use cm7.2 gaap package..
Sent from my WT19i using xda app-developers app
Okay so i've installed Cyanogen 7 and i made sure to download the file that was appropiate for my phone ST18i
I followed all of the steps but for some reason when i try to start my phone, it keeps rebooting when it asks me to press the android.
Why is this happening?
Sorry again for being so rubbish at this
cashtecz said:
Okay so i've installed Cyanogen 7 and i made sure to download the file that was appropiate for my phone ST18i
I followed all of the steps but for some reason when i try to start my phone, it keeps rebooting when it asks me to press the android.
Why is this happening?
Sorry again for being so rubbish at this
Click to expand...
Click to collapse
Did you perform the factory reset in cwm? That's important!
mihahn said:
Did you perform the factory reset in cwm? That's important!
Click to expand...
Click to collapse
Yes i did exactly what the guide said:
8. Now select “Wipe Data / Factory Reset” and then “Wipe partition cache” option (this is why you need to backup your data from the Xperia Ray).
cashtecz said:
Yes i did exactly what the guide said:
8. Now select “Wipe Data / Factory Reset” and then “Wipe partition cache” option (this is why you need to backup your data from the Xperia Ray).
Click to expand...
Click to collapse
On which software version have you been before? On ICS or on Gingerbread?
mihahn said:
On which software version have you been before? On ICS or on Gingerbread?
Click to expand...
Click to collapse
before all of this is was on ICS 4.0.4. but i downgraded to gingerbread 2.3.4.
cashtecz said:
before all of this is was on ICS 4.0.4. but i downgraded to gingerbread 2.3.4.
Click to expand...
Click to collapse
Try another rom than cyanogenmod 7. Maybe try cyanogenmod 9 or 10. Or you install the kernel+zip again...
mihahn said:
Try another rom than cyanogenmod 7. Maybe try cyanogenmod 9 or 10. Or you install the kernel+zip again...
Click to expand...
Click to collapse
Good news! i downloaded a different cyanogen 7 cm-7.2.0-urushi.zip and that one seems to be working.. now all i need to do is flash gapps and everything should work. I'll try that right now!
EDIT: Everything is working.. Appstore was already included with this cyanogen and i'm finally installing my phone now.
Thank you all so much for your help.
Kind Regards,
Hello, I've been using ARHD for some time and I think it's the best (stock inspired) rom out there.
After installing version 18.0 it has come to my attention that altough I'm using the ELLA baseband, my bootloader is somehow still ALE8.
Why is that? and how do I update to the latest one?
Thanx.
may I know how you check the bootloader ??
if you want the bootloader, download from below link and flash using pc odin
http://forum.xda-developers.com/showpost.php?p=36258060&postcount=41425
XeactorZ said:
may I know how you check the bootloader ??
if you want the bootloader, download from below link and flash using pc odin
http://forum.xda-developers.com/showpost.php?p=36258060&postcount=41425
Click to expand...
Click to collapse
Yes, I was an app called android system info from the play store.
Thank you for the quick reply. Is it safe to upgrade using odin no matter which rom I have?
sorry for my lack of knowledge
yes
Hi!
I have a Question. How can I change the european model wt19i into wt19a version?
I had problems with installation new softwares from android development custom roms, becouse need wt19a version.
I try to use build.prop editor, becouse i found one information on internet where this option gives me availability to install custom rom on my phone, but this is not working. Still getting that same problems in recovery. Other option where will be 100% working did u know?
Rico` said:
Hi!
I have a Question. How can I change the european model wt19i into wt19a version?
I had problems with installation new softwares from android development custom roms, becouse need wt19a version.
I try to use build.prop editor, becouse i found one information on internet where this option gives me availability to install custom rom on my phone, but this is not working. Still getting that same problems in recovery. Other option where will be 100% working did u know?
Click to expand...
Click to collapse
Please flash the ics wt19i firmware ..it is the easiest thing u can do and try to install custom roms
http://forum.xda-developers.com/showthread.php?t=1837398
If not try to install a custom kernal like rege,kappa,lupus..but the best thing is going to wt19i ftf
Arrow11 said:
Please flash the ics wt19i firmware ..it is the easiest thing u can do and try to install custom roms
http://forum.xda-developers.com/showthread.php?t=1837398
If not try to install a custom kernal like rege,kappa,lupus..but the best thing is going to wt19i ftf
Click to expand...
Click to collapse
But i need to install custom rom who need wt19a model, and u wrote to install software with wt19i in name, so again i will cant install custom rom like PAC or other. :/
Rico` said:
But i need to install custom rom who need wt19a model, and u wrote to install software with wt19i in name, so again i will cant install custom rom like PAC or other. :/
Click to expand...
Click to collapse
But there's no difference between WT19a and WT19i. I guess the a version is for a specific land (I don't know which) and i is the universal
All custom roms are made for WT19, it doesn't matter if it's a or i
Which custom rom do you want to install, where it fails?
Sent from my Nexus 4 running Android 4.3
mihahn said:
But there's no difference between WT19a and WT19i. I guess the a version is for a specific land (I don't know which) and i is the universal
All custom roms are made for WT19, it doesn't matter if it's a or i
Which custom rom do you want to install, where it fails?
Sent from my Nexus 4 running Android 4.3
Click to expand...
Click to collapse
A stands for American version.
mihahn said:
But there's no difference between WT19a and WT19i. I guess the a version is for a specific land (I don't know which) and i is the universal
All custom roms are made for WT19, it doesn't matter if it's a or i
Which custom rom do you want to install, where it fails?
Sent from my Nexus 4 running Android 4.3
Click to expand...
Click to collapse
But when i try to install the new software i have information "WARNING" this phone is not WT19a.
If u can tell me how i can install the PAC 4.3 from android development for my phone. wt19 is a coconut right?
Rico` said:
But when i try to install the new software i have information "WARNING" this phone is not WT19a.
If u can tell me how i can install the PAC 4.3 from android development for my phone. wt19 is a coconut right?
Click to expand...
Click to collapse
Yes, just install the coconut version
mihahn said:
Yes, just install the coconut version
Click to expand...
Click to collapse
Did u read this topic? or only you pretend that you're listening? I've TRY THIS STILL AND BECOUSE I POST HERE MESSAGE ABOUT THIS PROBLEM
I CAN'T INSTALL THIS ROM BECOUSE HAVE PROBLEM ABOUT WT19A and can't INSTALL ON WT19I.
in CWM v5.0.2.7 when i try install ZIP, i get info about assert failed get prop ro.product device .... and much more, rerrror in sdcard beanstalk np. status 7 installation aborted
I means international version,a means american version,all custom ROMs support for I version.but if u having a problem with I version then flash a versions ftf :thumbup:
Sent from my WT19i using xda premium
Rico` said:
Did u read this topic? or only you pretend that you're listening? I've TRY THIS STILL AND BECOUSE I POST HERE MESSAGE ABOUT THIS PROBLEM
I CAN'T INSTALL THIS ROM BECOUSE HAVE PROBLEM ABOUT WT19A and can't INSTALL ON WT19I.
in CWM v5.0.2.7 when i try install ZIP, i get info about assert failed get prop ro.product device .... and much more, rerrror in sdcard beanstalk np. status 7 installation aborted
Click to expand...
Click to collapse
Man, just edit the updater-script and delete the first 3 lines saying getprop. Then repack the zip and flash it. Should work
And btw could it be you wiped system? Because you shouldn't do that and if you do it, you will get the getprop error
Sent from my Nexus 4 running Android 4.3
mihahn said:
Man, just edit the updater-script and delete the first 3 lines saying getprop. Then repack the zip and flash it. Should work
And btw could it be you wiped system? Because you shouldn't do that and if you do it, you will get the getprop error
Sent from my Nexus 4 running Android 4.3
Click to expand...
Click to collapse
Deleted, dont help. Now i dont see this lines, but only installation aborted.
Rico` said:
Deleted, dont help. Now i dont see this lines, but only installation aborted.
Click to expand...
Click to collapse
Then you deleted too much or you repacked the wrong way e.g. with the wrong compression rate
Try installing again with the original zip and don't wipe system or you pack the modified zip again using 7zip and try to flash it
Sent from my Nexus 4 running Android 4.3
mihahn said:
Then you deleted too much or you repacked the wrong way e.g. with the wrong compression rate
Try installing again with the original zip and don't wipe system or you pack the modified zip again using 7zip and try to flash it
Sent from my Nexus 4 running Android 4.3
Click to expand...
Click to collapse
Repacked with 7zip dont work, I saw on internet pogram with the name a Update Zip Packager 3.0 and again i try to rebuild this installation. Now i try to install this, and see text installing update.... but i think this dosen't working too...
Yep, this not work, i get info about installation aborted after few mins...
Rico` said:
Hi!
I have a Question. How can I change the european model wt19i into wt19a version?
I had problems with installation new softwares from android development custom roms, becouse need wt19a version.
I try to use build.prop editor, becouse i found one information on internet where this option gives me availability to install custom rom on my phone, but this is not working. Still getting that same problems in recovery. Other option where will be 100% working did u know?
Click to expand...
Click to collapse
pls choose correct rom or you will end up in bricked one:angel:
prime3045 said:
pls choose correct rom or you will end up in bricked one:angel:
Click to expand...
Click to collapse
I'm only pick corrects rom to this model, but i dont know why this can't install on my model.
Hi guys, i have bought an Samsung S5839i Ace and i have rooted it using some info from this site. Everything works fine but when i run Gamecih my phone freezes and i have to remove battery. Same with GG . I have tried GameKiller but when i search any value the phone just restarts itself. All other apps like Chainfire 3D or Titanium backup runs without any problems. Could someone please tell me what is the problem ? I also tried it with usb debugging on/off . Thanks for replies.
etko1 said:
Hi guys, i have bought an Samsung S5839i Ace and i have rooted it using some info from this site. Everything works fine but when i run Gamecih my phone freezes and i have to remove battery. Same with GG . I have tried GameKiller but when i search any value the phone just restarts itself. All other apps like Chainfire 3D or Titanium backup runs without any problems. Could someone please tell me what is the problem ? I also tried it with usb debugging on/off . Thanks for replies.
Click to expand...
Click to collapse
I fixed by flashing xxla2 or any custom Rom.
Sent from my GT-S5830i
etko1 said:
Hi guys, i have bought an Samsung S5839i Ace and i have rooted it using some info from this site. Everything works fine but when i run Gamecih my phone freezes and i have to remove battery. Same with GG . I have tried GameKiller but when i search any value the phone just restarts itself. All other apps like Chainfire 3D or Titanium backup runs without any problems. Could someone please tell me what is the problem ? I also tried it with usb debugging on/off . Thanks for replies.
Click to expand...
Click to collapse
Have you install Custom kernel ?? Because GameCIH and some app dose not run in stock kernel. Its run only on custom kernels.
$£NT F®OM ©OOPE®VE
i have not installed anything i only rooted my phone. So would installing custom rom help me solve this problem ? and if so could u guys please suggest me some ? because i have never done this before so im a newbie in this. Thanks
etko1 said:
i have not installed anything i only rooted my phone. So would installing custom rom help me solve this problem ? and if so could u guys please suggest me some ? because i have never done this before so im a newbie in this. Thanks
Click to expand...
Click to collapse
If you want to run only some apps, then downlod custom kernel and install via CWM. Here some names.
Helllock,Rafael Baugis,Thunder kernel,bielt.v3 kernel, nit kernel.
$£NT F®OM ©OOPE®VE
Raxit k. Tandel said:
If you want to run only some apps, then downlod custom kernel and install via CWM. Here some names.
Helllock,Rafael Baugis,Thunder kernel,bielt.v3 kernel, nit kernel.
$£NT F®OM ©OOPE®VE
Click to expand...
Click to collapse
Thanks , i allready installed CM7.2 but i cant get gapps to work, so im thinking about reinstalling back to stock with odin, if i would do so could i update only Kernel ? and how ? Thanks
i can t fine gamecih on play store, is it banned?
edit-------
...and why?
Angryace said:
i can t fine gamecih on play store, is it banned?
edit-------
...and why?
Click to expand...
Click to collapse
http://www.cih.com.tw/gamecih.html
etko1 said:
Thanks , i allready installed CM7.2 but i cant get gapps to work, so im thinking about reinstalling back to stock with odin, if i would do so could i update only Kernel ? and how ? Thanks
Click to expand...
Click to collapse
You may use a stock based Rom too. You can flash a different kernel on stock Rom. But root is required.
Sent from my GT-S5830i using Tapatalk 2
Envy-X said:
You may use a stock based Rom too. You can flash a different kernel on stock Rom. But root is required.
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the reply, I allready flashed my phone back to stock all i have is root again, so how can i change the kernel ? and which one is most stable ? because i want my phone to be as it is just so it can run gamecih or other apps correctly.
etko1 said:
Thanks for the reply, I allready flashed my phone back to stock all i have is root again, so how can i change the kernel ? and which one is most stable ? because i want my phone to be as it is just so it can run gamecih or other apps correctly.
Click to expand...
Click to collapse
I use rafael.baugis kernel, its my favourite. There are others too like thunder kernel, cyanus and interactive for stock Roms.
To install cyanus and thunder, just flash them through cwm.
To install interactive kernel, flash file in odin.
To flash rafaels kernel, download boot.img and modules from his mediafire folder (link can be found in his thread) download the boot.img 201303 e3 stable and modules 201303. Flash them in stock recovery. Not cwm. Or you will get bugs.
Sent from my GT-S5830i using Tapatalk 2
Envy-X said:
I use rafael.baugis kernel, its my favourite. There are others too like thunder kernel, cyanus and interactive for stock Roms.
To install cyanus and thunder, just flash them through cwm.
To install interactive kernel, flash file in odin.
To flash rafaels kernel, download boot.img and modules from his mediafire folder (link can be found in his thread) download the boot.img 201303 e3 stable and modules 201303. Flash them in stock recovery. Not cwm. Or you will get bugs.
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Thank bro, i allready downloaded those files but i dont understand one step in the instructions :
How to install Kernel with E3 Recovery (Stock):
shutdown the phone
hold the keys Vol-Up + Home + Power per 6 seconds
select the option "apply update from sdcard"
select the file ( xxxxxxxxxxxx-XXX-boot.img.zip )
wait the end of process and reboot
hold the keys Vol-Up + Home + Power per 6 seconds
select the option "apply update from sdcard"
select the file ( Select_you_rom_file.zip )
wait the end of process
select the option "apply update from sdcard"
select the file ( xxxxxxxxxxxx-modules.zip )
wait the end of process and reboot
Which file do I have to select ?
EDIT: allready figured it out , i just had to skip that step now just lets see if gamecih is working
EDIT2: YAAAY IT WORKS!!! THANK YOU GUYS FOR HELPING ME WITH IT !!! (sry for the caps but im a bit excited )