Like the title states. All roms I have used recently do not have the old epst, and I am trying to flash a prl. What can I do that on?
Sent from my PG86100 using XDA App
For starters it has to be a Sense rom. And if you're on a sense rom, you will need to make sure that that epst is installed. (Most have them) If it doesn't, you can find it floating around here somewhere.
Sent from the MIUI powered 3d
moosh3 said:
Like the title states. All roms I have used recently do not have the old epst, and I am trying to flash a prl. What can I do that on?
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
If you need the EPST here it is: http://dev-host.org/hkmhxwj6aztz/EPST.apk
Hey, jay , doesn't warm 2.3 ROM use OG Evo epst.apk?
Sent from my PG86100 using xda premium
I've got a flashable zip that will give you the old epst...1 min...
Edit:
http://db.tt/muvr5rdr
The old epst is cool for PRL changing, but crashes when you try and edit WiMAX settings. I may remove it from my ROM.
freeza said:
The old epst is cool for PRL changing, but crashes when you try and edit WiMAX settings. I may remove it from my ROM.
Click to expand...
Click to collapse
Good to know Freeza. Thanks.
Related
So does anyone have the EPST with ##775#
if it would even work for the evo 3D
Sent from my PG86100 using XDA App
I have it, it works but I can't host. PM me ill email it. If you can find a host will you put it up?
Sent from my PG86100 using XDA App
Pm sent
Sent from my PG86100 using XDA App
shiftwig113 said:
Pm sent
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
I would like it also, and I also need to know how to put it into a rom. Is it an APK?
smalltownbird said:
I would like it also, and I also need to know how to put it into a rom. Is it an APK?
Click to expand...
Click to collapse
Use rootexplorer and place it on ur system/app folder. Need to change the permissions too..
Evo[3D]
What do the permissions need to be set too?
I didn't set the permissions to anything beside what it is assigned. I deleted the original epst, reboot then copy pasted the downgraded version to system /app and its working like a charm.... For me.
Sent from my PG86100 using XDA App
Can anyone who has it send me.A pm with a link to download it? Thanks!
Sent from my PG86100 using XDA Premium App
I know SteelH rom 1.01 has it. I downloaded the rom, extracted and pushed EPST.apk to /system/app in recovery, wiped dalvik and rebooted.
Now not roaming on verizon towers.
I feel like I should know what this feature is but could somebody enlighten me? What are the benefits of using the old version opposed to the newer one? Thanks!
greg.dassing said:
I feel like I should know what this feature is but could somebody enlighten me? What are the benefits of using the old version opposed to the newer one? Thanks!
Click to expand...
Click to collapse
You can type ##775# and apply a verizon prl, which would allow you to use 3g on verizon towers.
Better signal that way.
nabbed said:
You can type ##775# and apply a verizon prl, which would allow you to use 3g on verizon towers.
Better signal that way.
Click to expand...
Click to collapse
Wow! No ****? So once you load the .apk (or whatever) and dial ##775#, the PRL is altered and will seamlessly use 3G from Verizon towers as well??
greg.dassing said:
Wow! No ****? So once you load the .apk (or whatever) and dial ##775#, the PRL is altered and will seamlessly use 3G from Verizon towers as well??
Click to expand...
Click to collapse
Here's the original thread:
http://forum.xda-developers.com/showthread.php?t=696073
I just tested - it works.
Thanks for the info! Thanks button as been pressed
I had this working on my OG EVO; however, I cannot seem to get it to work on my 3d. I have tried the 00001, 01337, and 31337 prls. Each one tells me verzion cannot authenticate my phone.
This is a common error. You have to call sprint and have them reprovision your phone on the server side. Just tell them that can't make phone calls or text.
Look here
http://forum.xda-developers.com/showthread.php?t=1196491
osi13 said:
I had this working on my OG EVO; however, I cannot seem to get it to work on my 3d. I have tried the 00001, 01337, and 31337 prls. Each one tells me verzion cannot authenticate my phone.
Click to expand...
Click to collapse
Sent from my PG86100 using XDA App
can someone please post a link to this file?
the link in the evo thread is dead.
http://forum.xda-developers.com/attachment.php?attachmentid=376738&d=1281375059
edit -- try this link
It's cooked right into my rom
Does anyone have the original EPST from the Evo 3D? Apparently *2 doesn't work with the modified one.
Be careful to much roaming and sprint will give you the boot!
Sent from my PG86100 using XDA App
hey guys the reason of this thread is that im just getting 1x when usually was getting 3g everytime,so after the ota update the signal is relly bad and i been upgrading and downrading prl, can someone help me out if theres is a solution?
Are you saying that it's always on 1X? Or is it constantly switching back and forth?
oohaylima said:
Are you saying that it's always on 1X? Or is it constantly switching back and forth?
Click to expand...
Click to collapse
is always in 1x bro
Ah, there is an answer to this. Someone here came across this earlier. Let's see if we can find it.............
I was having the same problem, so I downgrade the prl and problem solved!
Sent from my PG86100 using Tapatalk
Hmmmm......from what I can gather, have you tried checking what the preferred mode is on?
togo13 said:
I was having the same problem, so I downgrade the prl and problem solved!
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
ive doneall of tht bro
oohaylima said:
Hmmmm......from what I can gather, have you tried checking what the preferred mode is on?
Click to expand...
Click to collapse
how do i check that?
Go to the dialer and hit ##3282#, put in your msl, click on EVDO --> hit preferred mode --> change from CDMA only to automatic if different. Commit changes and reboot.
oohaylima said:
Go to the dialer and hit ##3282#, put in your msl, click on EVDO --> hit preferred mode --> change from CDMA only to automatic if different. Commit changes and reboot.
Click to expand...
Click to collapse
It was automatic already bro
Sent from my PG86100 using XDA Premium App
Recommit. Maybe it could be a glitch. We'll keep searching for other solutions in the meantime. Another ROM maybe?
What prl are you on? I know you said you downgraded, but maybe it didn't take? The latest prl sent out by Sprint is causing this issue for everyone.
Wat prl r u currently on? If its 58080 or somethin its a 1xrtt prl that is blocking ur 3g. U need to revert back to 21080. Search the 3d forum for instructions. Sprint pushed out a bad prl! Still havent fixed it. This works for unrooted phones as well.
Sent from my PG86100 using xda premium
Visionikz03 said:
Wat prl r u currently on? If its 58080 or somethin its a 1xrtt prl that is blocking ur 3g. U need to revert back to 21080. Search the 3d forum for instructions. Sprint pushed out a bad prl! Still havent fixed it. This works for unrooted phones as well.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
right now im on prl 21080 but man it is weird for real yo ima flash synergy now to see what happen
There is a 21081 zip in one of these threads about 3g signal, download and then use ##775# and then update your prl that way...I did it and my 3g is perfect...if you can't find the thread about 29 posts down get ahold of housry23 he will hook u up w what u need
Sent from my PG86100 using xda premium
I wrote up a tutorial on how to update your PRL manually if this helps.
http://sirthumpalot.blogspot.com/2011/09/how-to-fix-bad-prl-updates-for-htc-evo.html
Goodluck!
Sent from my PG86100 using XDA App
I had a problem like that after flasing clean ROM , what I dis is update profile and got fixed
Sent from my PG86100 using Tapatalk
SirThumpaLot said:
I wrote up a tutorial on how to update your spl manually if this helps.
http://sirthumpalot.blogspot.com/2011/09/how-to-fix-bad-prl-updates-for-htc-evo.html
Goodluck!
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
This fixed mine. Thanks
Sent from my PG86100 using Tapatalk
shockwaveaz said:
This fixed mine. Thanks
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
No problem, dood.... Anytime!
Sent from my PG86100 using XDA App
Ok so ##775# no longer works and I'm away for the weekend where I only roam and service is God awful... I'd like to flash another prl for the weekend. Any ideas? I don't have a gb rom or backup to use on me either. If I'm screwed, then oh well and I can wait until I'm back home.
Sent from my PG86100 using XDA
gk1984 said:
Ok so ##775# no longer works and I'm away for the weekend where I only roam and service is God awful... I'd like to flash another prl for the weekend. Any ideas? I don't have a gb rom or backup to use on me either. If I'm screwed, then oh well and I can wait until I'm back home.
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
i was wondering the same thing a little bit ago. ##775# doesnt work on ICS..which sucks. hope someone can answer this one.
Have you tried to change the EPST.apk that has the ##775# option?
Have you looked into using the older epst.apk with more options? I believe the one from the EVO 4G?
Dang, I'm too slow... DarkManX4lf beat me lol
Actually yes, I did try an older epst. Doesn't work. I actually just downloaded a sense 3 rom over night (speed under 100 kbps) and crossed my fingers it didn't time out. Flashed that, installed my older epst app, installed my prly, and went back to ics... Still curious about an easier way but hey I got it going. Thanks for the suggestions though.
Sent from my PG86100 using XDA
I use QPST, just hook up phone and push prl (after you setup QPST). but that seems to be the easiest way for me...
netwokz said:
I use QPST, just hook up phone and push prl (after you setup QPST). but that seems to be the easiest way for me...
Click to expand...
Click to collapse
Don't you need a pc for that? That's what I would have tried if I had access. But thanks.
Sent from my PG86100 using XDA
gk1984 said:
Don't you need a pc for that? That's what I would have tried if I had access. But thanks.
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
Been looking for solution myself on ICS, but as you found out EPST does not work. Since I don't always have access to a PC that has all of the QPST stuff installed I just load up a back up of a GB ROM and change it, then go back to my ICS ROM.
So, they are currently rolling out 800 mhz and LTE in my area, From what I understand the PRL makes no difference other than to look for roaming and certain bands. So an old PRL that does not have LTE in my area is bad. I have also come across a later corprate PRL to allow verizon roming.
I have the latest avatar rom and rooted. I am still S-on and I have changed ro.build.type to dev. Debugging is also on. I have downloaded the latest PRL and ##778# does not work. In fact I can not find a single ## code that works. Am I screwed? Do I need to go back to stock???
You need to be on a Sense ROM to update your PRL or use those dialer commands.
Also keep in mind that you cannot roam on another 4G network.
Sent from my EVO using xda premium
FinZ28 said:
You need to be on a Sense ROM to update your PRL or use those dialer commands.
lso keep in mind that you cannot roam on another 4G network.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Also I think AOSP kills the dialer commands too. I tried to update my PRL on CM10 and it just kept trying to dial the number rather than giving me the update menu. Just an FYI.
Sent from my EVO using xda app-developers app
So how do you update the friggin prl???
Kogashuko said:
So how do you update the friggin prl???
Click to expand...
Click to collapse
Sense rom/epst or DFS or qpst... That's how you friggin do it...
Flowed from my Jewel using Tapatalk 2
LOL!
gunfromsako said:
Sense rom/epst or DFS or qpst... That's how you friggin do it...
Flowed from my Jewel using Tapatalk 2
Click to expand...
Click to collapse
......kids.......
power_tennis said:
......kids.......
Click to expand...
Click to collapse
There is only 1 kid here... and he needs to learn how to read.
Sent from my Evo 4G LTE
gunfromsako said:
There is only 1 kid here... and he needs to learn how to read.
Sent from my Evo 4G LTE
Click to expand...
Click to collapse
This coming from a guy that seems to follow my posts around just to argue...
You try installing the latest CM10.1 rom and follow the plethora of different prl update threads on here and see if it works for you. If you know a trick to it great, that is why I am asking, But showing up just to make snide comments is stupid.
Follow the directions in this thread to manually change your PRL while on a Sense ROM. If you simply want the latest Sprint PRL for your area, make a Nandroid backup of your current setup, then flash a Sense ROM and update your PRL from the settings menu. After it's updated you can restore your backup.
http://themikmik.com/showthread.php...-Fly-PRLChange&p=293496&viewfull=1#post293496
Sent from my EVO using xda premium
FinZ28 said:
Follow the directions in this thread to manually change your PRL while on a Sense ROM. If you simply want the latest Sprint PRL for your area, make a Nandroid backup of your current setup, then flash a Sense ROM and update your PRL from the settings menu. After it's updated you can restore your backup.
http://themikmik.com/showthread.php...-Fly-PRLChange&p=293496&viewfull=1#post293496
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Thank you.
I did a hybrid of the two.
I had to flash a sense rom and it still would not use the update PRL.
I then used ## codes to enable modem mode and used CDMA workshop to flash the corporate rom!
If I could only find a way to enable modem/ dev mode on my Avatar rom I would be set.
Thank you to all that provided constructive responses.
Kogashuko said:
Thank you.
I did a hybrid of the two.
I had to flash a sense rom and it still would not use the update PRL.
I then used ## codes to enable modem mode and used CDMA workshop to flash the corporate rom!
If I could only find a way to enable modem/ dev mode on my Avatar rom I would be set.
Thank you to all that provided constructive responses.
Click to expand...
Click to collapse
After flashing a Sense rom you must edit the build.prop so that ro.build.type = dev. Reboot then try ##778# and you will have the option to change prl. I've done it on meanbean, viper, operation jellybean, and the Sense 5 port. All with success. Just some future info.
Sent from my Evo 4G LTE
Hello ladies and gentlemen. First and foremost I would like to say that XDA is a wonderful community of which I am very pleased to finally be taking a part of. Since my very first Samsung Transform that I had back in 2010, to my Current HTC Ego 4g LTE I have used XDA and the resources that are provided here for all of my Android related questions. For that I want to thank XDA for having such a wonderful community and hope that things continue to devolp fruitfully for everyone.
Now onto the subject of my first post, of which I hope is appropriate in every manner.
I am running Cyanogenmod v 10.0 on my HTC Evo 4g LTE, TWRP recovery, S-on, Hboot v unknown currently.
Upon installing Cyanogenmod v 10.0 after much struggle I noticed that the 4g does not work. I checked my PRL and noticed that I am running 25015. So I began trying to find a method to update my PRL in hopes that this would allow the 4g to begin working. I have tried many different ways that I have found throughout XDA and Cyanogenmod forums to no avail. No dial codes work. Period. Please do not suggest a dial code because I have already gone through and tried every prominent variation. The next thing I began trying was connectingy phone to the computer and using the CDMA editor program(I cannot remember the name currently). The problem I ran into with this was entering DIAG mode. Again the dial code does not work due to the non Sense ROM. I have tried many variations of the Echo > 1 command but I cannot locate a DIAG file that this command would apply to. I have found a qct_ file but it is corrupt.
If anyone has found a method to put the phone into DIAG mode, or update the PRL using a different method that I have not mentioned your assistance would be greatly appreciated.
Thanks in advance.
I will update this post with more specific information on what I have tried when I have access to a desktop terminal.
You could make a backup, revert back to a sense Rom, update the PRL, then restore the backup.
Sent from my EVO using xda app-developers app
decayer177 said:
You could make a backup, revert back to a sense Rom, update the PRL, then restore the backup.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
^Easiest way to do it. It's always good to keep a Sense backup for updating profile and PRL, and for the occasional GPS fix.
Sent from my EVO 4G LTE using xda premium
FinZ28 said:
^Easiest way to do it. It's always good to keep a Sense backup for updating profile and PRL, and for the occasional GPS fix.
Sent from my EVO 4G LTE using xda premium
Click to expand...
Click to collapse
I would like to figure out how to do so without flashing a new sense ROM. Until I get S-off I have to flash the boot.IMG if I understand this correctly. I had to do that when I flashed Cyanogenmod the first time.
hentosu said:
I would like to figure out how to do so without flashing a new sense ROM. Until I get S-off I have to flash the boot.IMG if I understand this correctly. I had to do that when I flashed Cyanogenmod the first time.
Click to expand...
Click to collapse
Time to get S-off
Sent from my EVO 4G LTE using xda premium
Even so, I think it would be good to find a direct method to update the PRL and Profile in Cyanogenmod as opposed to simply working around it. That's no fun. I have beem trying to hunt down the file to change but to little success.
hentosu said:
Even so, I think it would be good to find a direct method to update the PRL and Profile in Cyanogenmod as opposed to simply working around it. That's no fun. I have beem trying to hunt down the file to change but to little success.
Click to expand...
Click to collapse
Definitely would be nice to know.
Is your firmware up to date? Only reason I ask is because your PRL is up to date and won't help you with your lack of 4G LTE.
Sent from my EVO 4G LTE using xda premium
FinZ28 said:
Definitely would be nice to know.
Is your firmware up to date? Only reason I ask is because your PRL is up to date and won't help you with your lack of 4G LTE.
Sent from my EVO 4G LTE using xda premium
Click to expand...
Click to collapse
My PRL is up to date? I thought sprints newest PRL was like 60xxx.
What do I look for in my phone info for my firmware version? If it is not up to date would that fix my 4g LTE issue on cyanogenmod?
You might need to call sprint and have them reprovision your phone, for that you probably need to be on a sense rom, flash meanbean which has a s-on installer then restore your cm nandroid... Good luck! I don't think there's other way to do what you need in aosp... :banghead:
Sent from my EVO using xda app-developers app
hentosu said:
My PRL is up to date? I thought sprints newest PRL was like 60xxx.
What do I look for in my phone info for my firmware version? If it is not up to date would that fix my 4g LTE issue on cyanogenmod?
Click to expand...
Click to collapse
Go to Menu>Settings >About phone and see what your baseband version is, then post back.
Sent from my EVO 4G LTE using xda premium
FinZ28 said:
Go to Menu>Settings >About phone and see what your baseband version is, then post back.
Sent from my EVO 4G LTE using xda premium
Click to expand...
Click to collapse
Base band version: 1.12.11.1119
I enjoy trying to find new solutions to problems I encounter. I do not wish to take my phone to sprint and let them do anything to my phone. My phone is my baby.
hentosu said:
Base band version: 1.12.11.1119
I enjoy trying to find new solutions to problems I encounter. I do not wish to take my phone to sprint and let them do anything to my phone. My phone is my baby.
Click to expand...
Click to collapse
Okay. You're a version behind. You need to S-off and update to the newest firmware version.
Take a look at the link in my sig and check out the link on updating firmware at the bottom.
Sent from my EVO 4G LTE using xda premium