Ok so ##775# no longer works and I'm away for the weekend where I only roam and service is God awful... I'd like to flash another prl for the weekend. Any ideas? I don't have a gb rom or backup to use on me either. If I'm screwed, then oh well and I can wait until I'm back home.
Sent from my PG86100 using XDA
gk1984 said:
Ok so ##775# no longer works and I'm away for the weekend where I only roam and service is God awful... I'd like to flash another prl for the weekend. Any ideas? I don't have a gb rom or backup to use on me either. If I'm screwed, then oh well and I can wait until I'm back home.
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
i was wondering the same thing a little bit ago. ##775# doesnt work on ICS..which sucks. hope someone can answer this one.
Have you tried to change the EPST.apk that has the ##775# option?
Have you looked into using the older epst.apk with more options? I believe the one from the EVO 4G?
Dang, I'm too slow... DarkManX4lf beat me lol
Actually yes, I did try an older epst. Doesn't work. I actually just downloaded a sense 3 rom over night (speed under 100 kbps) and crossed my fingers it didn't time out. Flashed that, installed my older epst app, installed my prly, and went back to ics... Still curious about an easier way but hey I got it going. Thanks for the suggestions though.
Sent from my PG86100 using XDA
I use QPST, just hook up phone and push prl (after you setup QPST). but that seems to be the easiest way for me...
netwokz said:
I use QPST, just hook up phone and push prl (after you setup QPST). but that seems to be the easiest way for me...
Click to expand...
Click to collapse
Don't you need a pc for that? That's what I would have tried if I had access. But thanks.
Sent from my PG86100 using XDA
gk1984 said:
Don't you need a pc for that? That's what I would have tried if I had access. But thanks.
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
Been looking for solution myself on ICS, but as you found out EPST does not work. Since I don't always have access to a PC that has all of the QPST stuff installed I just load up a back up of a GB ROM and change it, then go back to my ICS ROM.
Related
I'm trying to get the latest Verizon PRL so I have the best shot of getting 4G on the current pre-alpha CM7 build. Search has yielded no way of forcing a PRL update, though. Most threads say just wait for it. Anyone know of an alternative method?
Reboot. That's the only way. U can't dial #228 or whatever its different. Reasons? It has a similar card its a lot different then phone that don't have sim cards. :/
MONKY_1 said:
Reboot. That's the only way. U can't dial #228 or whatever its different. Reasons? It has a similar card its a lot different then phone that don't have sim cards. :/
Click to expand...
Click to collapse
Thanks I already was aware of that. I rebooted multiple times today and am still on 15008 though. Oh well. I'm wondering if running the leaked radio might be my issue in getting the new PRL...
Sent from my ADR6400L using XDA App
i'm on stock radio and still haven't gotten an update myself.....but i'm pretty sure the leaked one will not receive it.
How do i check my prl?
Sent from my INFECTED Thunderbolt, get virus son!
Droopie28 said:
How do i check my prl?
Click to expand...
Click to collapse
In a Sense-based ROM open the dialer, enter ##778#, then hit dial. Choose view mode in the menu that comes up, then scroll down to PRL and click that. Your current PRL will be listed at the top.
Sent from my ADR6400L using XDA App
Veridor said:
In a Sense-based ROM open the dialer, enter ##778#, then hit dial. Choose view mode in the menu that comes up, then scroll down to PRL and click that. Your current PRL will be listed at the top.
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
Im on virus, and nothing happened, it was generating something, but nothing popped up... but thanks!
Droopie28 said:
How do i check my prl?
Click to expand...
Click to collapse
home/menu/settings/about phone/software information/prl version
So does anyone have the EPST with ##775#
if it would even work for the evo 3D
Sent from my PG86100 using XDA App
I have it, it works but I can't host. PM me ill email it. If you can find a host will you put it up?
Sent from my PG86100 using XDA App
Pm sent
Sent from my PG86100 using XDA App
shiftwig113 said:
Pm sent
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
I would like it also, and I also need to know how to put it into a rom. Is it an APK?
smalltownbird said:
I would like it also, and I also need to know how to put it into a rom. Is it an APK?
Click to expand...
Click to collapse
Use rootexplorer and place it on ur system/app folder. Need to change the permissions too..
Evo[3D]
What do the permissions need to be set too?
I didn't set the permissions to anything beside what it is assigned. I deleted the original epst, reboot then copy pasted the downgraded version to system /app and its working like a charm.... For me.
Sent from my PG86100 using XDA App
Can anyone who has it send me.A pm with a link to download it? Thanks!
Sent from my PG86100 using XDA Premium App
I know SteelH rom 1.01 has it. I downloaded the rom, extracted and pushed EPST.apk to /system/app in recovery, wiped dalvik and rebooted.
Now not roaming on verizon towers.
I feel like I should know what this feature is but could somebody enlighten me? What are the benefits of using the old version opposed to the newer one? Thanks!
greg.dassing said:
I feel like I should know what this feature is but could somebody enlighten me? What are the benefits of using the old version opposed to the newer one? Thanks!
Click to expand...
Click to collapse
You can type ##775# and apply a verizon prl, which would allow you to use 3g on verizon towers.
Better signal that way.
nabbed said:
You can type ##775# and apply a verizon prl, which would allow you to use 3g on verizon towers.
Better signal that way.
Click to expand...
Click to collapse
Wow! No ****? So once you load the .apk (or whatever) and dial ##775#, the PRL is altered and will seamlessly use 3G from Verizon towers as well??
greg.dassing said:
Wow! No ****? So once you load the .apk (or whatever) and dial ##775#, the PRL is altered and will seamlessly use 3G from Verizon towers as well??
Click to expand...
Click to collapse
Here's the original thread:
http://forum.xda-developers.com/showthread.php?t=696073
I just tested - it works.
Thanks for the info! Thanks button as been pressed
I had this working on my OG EVO; however, I cannot seem to get it to work on my 3d. I have tried the 00001, 01337, and 31337 prls. Each one tells me verzion cannot authenticate my phone.
This is a common error. You have to call sprint and have them reprovision your phone on the server side. Just tell them that can't make phone calls or text.
Look here
http://forum.xda-developers.com/showthread.php?t=1196491
osi13 said:
I had this working on my OG EVO; however, I cannot seem to get it to work on my 3d. I have tried the 00001, 01337, and 31337 prls. Each one tells me verzion cannot authenticate my phone.
Click to expand...
Click to collapse
Sent from my PG86100 using XDA App
can someone please post a link to this file?
the link in the evo thread is dead.
http://forum.xda-developers.com/attachment.php?attachmentid=376738&d=1281375059
edit -- try this link
It's cooked right into my rom
Does anyone have the original EPST from the Evo 3D? Apparently *2 doesn't work with the modified one.
Be careful to much roaming and sprint will give you the boot!
Sent from my PG86100 using XDA App
Like the title states. All roms I have used recently do not have the old epst, and I am trying to flash a prl. What can I do that on?
Sent from my PG86100 using XDA App
For starters it has to be a Sense rom. And if you're on a sense rom, you will need to make sure that that epst is installed. (Most have them) If it doesn't, you can find it floating around here somewhere.
Sent from the MIUI powered 3d
moosh3 said:
Like the title states. All roms I have used recently do not have the old epst, and I am trying to flash a prl. What can I do that on?
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
If you need the EPST here it is: http://dev-host.org/hkmhxwj6aztz/EPST.apk
Hey, jay , doesn't warm 2.3 ROM use OG Evo epst.apk?
Sent from my PG86100 using xda premium
I've got a flashable zip that will give you the old epst...1 min...
Edit:
http://db.tt/muvr5rdr
The old epst is cool for PRL changing, but crashes when you try and edit WiMAX settings. I may remove it from my ROM.
freeza said:
The old epst is cool for PRL changing, but crashes when you try and edit WiMAX settings. I may remove it from my ROM.
Click to expand...
Click to collapse
Good to know Freeza. Thanks.
Hello all!
Long time reader here.
I've been looking for answers to this for several hours now and haven't been able to find anything that works.
I bought my Photon new about 2 months ago. Immediatly I rooted and unlocked it, with the thought that I was going to play around with custom ROMs as I did on my Epic 4g.
Anyway, this evening I decided to go ahead and put a new ROM on. I did the usuals, delvak, formats, etc.. I started with Joker's Skinny rev1. Install went great, but I was unable to use wifi. I couldnt even turn it on. It just says "Error" on the wifi settings menu. So I did some research and I found out that this is a common problem and simply needed a dhd.ko file to be replaced. So I did via 7zip and reflashed. Still no wifi. I then tried to give ACS's ROM a try, and same thing. So again, I replaced the dhd.ko file and reflashed. Still no glory. I also went ahead and re-unlocked the bootloader again just in case(read a few issues of that messing with wifi).
So needless to say, I can't figure out how to get my wifi back. I'm at a complete loss. Does anyone have any ideas? Also, if it matters, I live state-side. I don't have anything frozen either. Just a freshly installed ACS ROM.
Thanks for any help you guys can offer.
Flash skinny complete
alxlwson said:
Hello all!
Long time reader here.
I've been looking for answers to this for several hours now and haven't been able to find anything that works.
I bought my Photon new about 2 months ago. Immediatly I rooted and unlocked it, with the thought that I was going to play around with custom ROMs as I did on my Epic 4g.
Anyway, this evening I decided to go ahead and put a new ROM on. I did the usuals, delvak, formats, etc.. I started with Joker's Skinny rev1. Install went great, but I was unable to use wifi. I couldnt even turn it on. It just says "Error" on the wifi settings menu. So I did some research and I found out that this is a common problem and simply needed a dhd.ko file to be replaced. So I did via 7zip and reflashed. Still no wifi. I then tried to give ACS's ROM a try, and same thing. So again, I replaced the dhd.ko file and reflashed. Still no glory. I also went ahead and re-unlocked the bootloader again just in case(read a few issues of that messing with wifi).
So needless to say, I can't figure out how to get my wifi back. I'm at a complete loss. Does anyone have any ideas? Also, if it matters, I live state-side. I don't have anything frozen either. Just a freshly installed ACS ROM.
Thanks for any help you guys can offer.
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Downloading now. Is it also worth mentioning that mt 3G seems extra crappy now?
Sent from my MB855 using XDA App
I really need to update skinny. I plan to do a source build and edit it to death. Cm9 has my free time tied up. It won't be too much longer and I'll get everything going on cm9. Luckily rocko roms are turning out great. Eventually I'll go back and update my blur roms.
alxlwson said:
Downloading now. Is it also worth mentioning that mt 3G seems extra crappy now?
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Yeah. CM9 is looking nice, but I can't be bothered with all the script stuff right now...and I love my camera
Scripts have nothing to do with your camera. It simply changes a few things to make it faster. Great for stock rooted roms
alxlwson said:
Yeah. CM9 is looking nice, but I can't be bothered with all the script stuff right now...and I love my camera
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Oh I realize that. I was just saying that I dont want to fool with scripts to get a ROM going. And that i also like having a functional camera.
Why is the rom you pointed me to so heavy?! I think it said 427MB. Biggest ive ever seen!
Any ideas on what is causing the wifi issue?
Sent from my MB855 using XDA App
The radios are sensitive. The wifi driver must be compiled to the kernel you are using. In skinny unlocked it is. Skinny complete is the newest and has an awesome web top modification. Uncompressed its 2 gigs.
alxlwson said:
Oh I realize that. I was just saying that I dont want to fool with scripts to get a ROM going. And that i also like having a functional camera.
Why is the rom you pointed me to so heavy?! I think it said 427MB. Biggest ive ever seen!
Any ideas on what is causing the wifi issue?
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
All flashed up. Wifi working now. Thanks man!
Sent from my MB855 using XDA App
Well not completely working lol. The wifi keeps dropping connection ever minute or so. When its doing this, its also resetting the cdma radio. Im missing a crap ton of calls. Only way i know i am is bc of the voicemails being left. With wifi turned off, all is well.
Sent from my MB855 using XDA App
Anyone have other ideas on this?
Sent from my MB855 using XDA App
Sbf to 198-7, then unlock
alxlwson said:
Anyone have other ideas on this?
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Isnt that going to take me back to stock? Or does this include some new updates to the radio, etc...?
yes
alxlwson said:
Isnt that going to take me back to stock? Or does this include some new updates to the radio, etc...?
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Lol im having no luck. Sbf to the 198-7. Working great. Then I realized I no longer have a camera.
So the Sbf.. was that supposed to update some internal software to help make skinny work more stable
Sent from my MB855 using XDA App
198-7 clean install should take your back to like it came from the factory...
http://forum.xda-developers.com/showpost.php?p=20331570&postcount=3
(SBF: 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_7-CM-release-keys-signed-Sprint-US)
It did. But I already knew that. I wanted to use a different ROM. Was trying to figure out the wifi issues instead of going back to stock and forgetting about it..
Sent from my MB855 using XDA App
I'm having the same trouble with Skinny. I flashed the skinny14gedition and everything seems to work except for the wifi (error). Still little new to this but what is an sbf? My phone came with 198_6 not 7, should I still flash to that or is there a wifi fix for skinny? Thanks for any help.
Any way to change the prl while on JB or do I have to Odin back to stock first? Can we get the fassy into diag mode on JB?
Sent from my SCH-I500 using Tapatalk 2
Yeah I've been wondering the same thing. I've searched around in the past and the only reply I got was, it works fine just look at the numbers. But mine has never once updated correctly.
davezx6r said:
Yeah I've been wondering the same thing. I've searched around in the past and the only reply I got was, it works fine just look at the numbers. But mine has never once updated correctly.
Click to expand...
Click to collapse
I've never tried an automated update since I'm using my fassy on a different carrier than Verizon. I use modded prls anyway, so I flash them myself from the computer.
Sent from my SCH-I500 using Tapatalk 2
So is there a place I can get the normal vzw pros and flash them myself then? I never even thought about that.