Related
So trying to fastboot my phone with doomlord Xperiasspeed
I did the command :
Fastboot flash system boot.img
and i changed the name of the xperiasspeed.img to boot.img
Everything said it installed successfully, but now when I press the power button, it vibrates but does not boot.
I can get back into fastboot mode but thats it.
any help or ideas?
thanks
Flashtool.
could you possibly elaborate?
I am downloading the flashtool but what is the purpose and how do you use it?
I'm not an expert but it not sound like bricked device, but rather kernel installation that went wrong.
Just try flashing one more time, or flash your backup. You did a backup aren't you?
Sent from my LT26i using xda premium
brdl04 said:
could you possibly elaborate?
I am downloading the flashtool but what is the purpose and how do you use it?
Click to expand...
Click to collapse
Read the docs, there's a nice guide. You can also try the repair feature in PC Companion, but it might require the system to boot, so not sure.
K900 said:
Read the docs, there's a nice guide. You can also try the repair feature in PC Companion, but it might require the system to boot, so not sure.
Click to expand...
Click to collapse
What docs are you refferring to?
I have downloaded stock LT22_6.0.B.1.654.zip and am wanting to use the flash tool to flash this .img
OK step by step
Your phone could be easily recovered, we can try to do it
1.- have you tried a cold reboot ?? (with the xperia S hold both VOLUME UP key and POWER key during 10 to 15 seconds until device vibrates three times, not sure if it's the same with the P, then press power and check if it boots)
Still stuck??
2.- Download flashtool 0.8.0 and install it from here: http://androxyde.github.com/Flashtool/
-then download the 0.8.6 update and install it too
-then download a STOCK xperia P FTF and put it in the flashtool/firmwares folder (it should be in the root of your har drive, eg.: c:\flashtool\firmwares)
-then, enter flash mode (with the phone off hold VOL DOWN while connecting the USB cable to PC -> the LED will light green) and let your PC install the drivers
-then remove the USB cable, run Flashtool, press the flash button (the thunder icon), select "Flashmode" and click OK, select yourstock firmware for Xperia P and press OK
-When asked, enter flashmode again (flashtool shows an old xperia device, use the proper key combination for your device as stated before) and flash a fresh copy of the stock firmware.
-After flashing is complete, disconnect phone and press power to check if it's all OK.
---------- Post added at 12:37 AM ---------- Previous post was at 12:29 AM ----------
--------------------------------------------------------------------------------------
brdl04 said:
So trying to fastboot my phone with doomlord Xperiasspeed
I did the command :
Fastboot flash *system* boot.img
and i changed the name of the xperiasspeed.img to boot.img
...
Click to expand...
Click to collapse
BEWARE !!
1.- You are very confused my friend, "xperiasspeed" is from krabappel2548, not form doomlord.
2.- The proper commands should be:
To flash a boot image:
Code:
fastboot flash [B]boot[/B] boot.img
To flash a system image:
Code:
fastboot flash [B]system[/B] system.img
I am not sure what did you download from krabappel2548, but it seems you flashed a "boot" image to your phone's "system" image
You are mixing stuff up
Please read this guide before attempting anything again
-------------------------------------------------------------------------------------------------------------------------
Another advice:
Fastboot and Flashtool are different ways to flash.
To flash with flashtool you enter flash mode -> press the VOLUME DOWN key -> LED turns GREEN
To flash with fastboot you enter fastboot mode -> press VOLUME UP key -> LED turns BLUE
.
gtrab said:
OK step by step
Your phone could be easily recovered, we can try to do it
1.- have you tried a cold reboot ?? (with the xperia S hold both VOLUME UP key and POWER key during 10 to 15 seconds until device vibrates three times, not sure if it's the same with the P, then press power and check if it boots)
Still stuck??
2.- Download flashtool 0.8.0 and install it from here: http://androxyde.github.com/Flashtool/
-then download the 0.8.6 update and install it too
-then download a STOCK xperia P FTF and put it in the flashtool/firmwares folder (it should be in the root of your har drive, eg.: c:\flashtool\firmwares)
-then, enter flash mode (with the phone off hold VOL DOWN while connecting the USB cable to PC -> the LED will light green) and let your PC install the drivers
-then remove the USB cable, run Flashtool, press the flash button (the thunder icon), select "Flashmode" and click OK, select yourstock firmware for Xperia P and press OK
-When asked, enter flashmode again (flashtool shows an old xperia device, use the proper key combination for your device as stated before) and flash a fresh copy of the stock firmware.
-After flashing is complete, disconnect phone and press power to check if it's all OK.
---------- Post added at 12:37 AM ---------- Previous post was at 12:29 AM ----------
--------------------------------------------------------------------------------------
BEWARE !!
1.- You are very confused my friend, "xperiasspeed" is from krabappel2548, not form doomlord.
2.- The proper commands should be:
To flash a boot image:
Code:
fastboot flash [B]boot[/B] boot.img
To flash a system image:
Code:
fastboot flash [B]system[/B] system.img
I am not sure what did you download from krabappel2548, but it seems you flashed a "boot" image to your phone's "system" image
You are mixing stuff up
Please read this guide before attempting anything again
-------------------------------------------------------------------------------------------------------------------------
Another advice:
Fastboot and Flashtool are different ways to flash.
To flash with flashtool you enter flash mode -> press the VOLUME DOWN key -> LED turns GREEN
To flash with fastboot you enter fastboot mode -> press VOLUME UP key -> LED turns BLUE
.
Click to expand...
Click to collapse
When I hold down the Volume Down button and connect my Xperia P to flashtool, the notification LED goes green but the window with the old Xperia device doesn't go away and after a while the green LED turns red and the screen shows the charging animation.
I can enter CWM while the device powers up but I can't mount USB storage. My bootloader is locked and I tried to install the .54 small app tweak on my .544 (I didn't think it'd be an issue, but I was wrong! I'm a n00b. Nu H8 Pl0x )
I've also tried using the Sony Update Service but it can't detect my firmware because it can't detect my phone in Flash mode
Someone please help me. I've searched everywhere but couldn't find a solution.
I have the same problem, did you ever get this solved?
Old thread
Eason85 said:
I have the same problem, did you ever get this solved?
Click to expand...
Click to collapse
eswawan said:
Old thread
Click to expand...
Click to collapse
Check these websites. It will help.
If you are still confused about the process, ask again specifically!
http://developer.sonymobile.com/services/flash-tool/use-the-flash-tool-for-xperia-devices/
I'm trying to get my Xperia U into fastboot mode. I'm using a Mac. I've tried it using both standalone fastboot and FlashTool's fastboot mode, on two different Macs, but it never works. I turned off my phone, pressed down the volume up button, then connected the USB cable to my phone and the computer. Every time, instead of having the LED bar turn blue, it doesn't light up, the SONY logo appears, and I see the charging icon (i.e. not a complete boot). However, it's able to boot into flash mode using the same procedure except for volume down. How can I get it in fastboot mode?
Edit: The service menu says unlocking the bootloader is disallowed for my phone. I don't want to unlock it, but I'm guessing that's why it won't enter fastboot mode. How else can I downgrade my kernel? Can I place the kernel.sin in a FTF package and flash it using flashmode, or does flashmode only work for entire ROMs?
I was able to solve this using the two kernel FTF packages from the first quote in the 6.1.1.B.1.54 thread. I downgraded my kernel, rooted, then reupgraded it, all using FlashTool. Now my phone is rooted and Sony Bridge recognizes it as fully upgraded.
hi everyone,
when i try install experience v2.0 to my xperia u, it gives bootloop and don't starting syste. phone gives red light on illumination bar when starting, i tried stock .54 ftf with fastboot,
i can reach cwm menu, i can connect phone fastboot mode
thanks for helps, greetings
Explain the process you used to flash the Rom so I can try and see where the problem is
And is your bootloader locked or unlocked
Sent from my LT22i using xda premium
i have unlocked bootloader, now experience v2.0 rom
What did you do to flash the Rom and what kernel are you using
Sent from my LT22i using xda premium
First you have to flash cm9 than expirience v2
Sent from my Xperia U using Tapatalk HD
Kutukcu said:
hi everyone,
when i try install experience v2.0 to my xperia u, it gives bootloop and don't starting syste. phone gives red light on illumination bar when starting, i tried stock .54 ftf with fastboot,
i can reach cwm menu, i can connect phone fastboot mode
thanks for helps, greetings
Click to expand...
Click to collapse
Flash any Stock B.1.54 or C.1.0 (use flashtool).
Let it boot properly.
Download eXperience.zip and transfer to internal memory.
Now flash Munjenis's CWM kernel
How to flash?
Download fastboot package and extract it.
Download Memory Tweak.zip and extract it.
Copy ftr file from memory tweak and Place ftr to fastboot folder.
While device is power OFF:
Volume Up + USB cable connected to PC -> FASTBOOT MODE (BLUE LED will light up)
Open Command Prompt (Shift+Right mouse button) in Fastboot Folder
Write this commend and hit enter fastboot flash boot ftr
Done
thanks for helps everybody, but my phone does'nt stay in flash mode, after 20-30 seconds of green light, disconnecting
so i can't use flashtool
i have solved all problems, thanks for everything
My question is how to get into flashmode when formated system? So please help all I have a problem. Yesterday I just took my XP and turned it into CWM. Then i went into mounts and storage and accidentaly formated the system, then i got scared and rebooted my phone. Now it just boots and hangs on Sony logo. I tried hard reset by holding volume up +power for 10sec until phone vibrates 3 times. Then i tired to go into flashmode but when i connect it to pc green led shows out and after 2 or 3 sec. red light shows out and it just boots again into Sony logo. Please help somebody I just need to get into flashmode and then i can flash .tft with Flashtool. My phone is from O2 carrier (but unlocked all sim cards work) bootloader is locked. Please I really need help . Everybody who 'll help for me i'll say thanks
P.S Sorry for my bad English
First flash a custom rom
your's,
ajeteja.
---------- Post added at 08:16 PM ---------- Previous post was at 08:15 PM ----------
By formatting system.means deleting os u cant get paat the sony logo
your's,
ajeteja.
ajeteja said:
First flash a custom rom
your's,
ajeteja.
---------- Post added at 08:16 PM ---------- Previous post was at 08:15 PM ----------
By formatting system.means deleting os u cant get paat the sony logo
your's,
ajeteja.
Click to expand...
Click to collapse
Yeah I know but when I formated system from CWM I can't get into CWM anymore.
tauriuxx said:
Yeah I know but when I formated system from CWM I can't get into CWM anymore.
Click to expand...
Click to collapse
Install stock ICS using flashtool (in flashmode):
1. Download stock ICS
2. open flashtool
3. click on the ray
4. select flashmode
5. Click on browse to look for the ICS firmware you downloaded
6. Select "flash"
7. When it asks you for it, hold your devices volume down button and connect it to the PC
8. Wait for flash to end
After doing this you will be able to boot into ICS, if you want to access CWM, you'll have to install it again
carlaba2 said:
Install stock ICS using flashtool (in flashmode):
1. Download stock ICS
2. open flashtool
3. click on the ray
4. select flashmode
5. Click on browse to look for the ICS firmware you downloaded
6. Select "flash"
7. When it asks you for it, hold your devices volume down button and connect it to the PC
8. Wait for flash to end
After doing this you will be able to boot into ICS, if you want to access CWM, you'll have to install it again
Click to expand...
Click to collapse
It will be all good if I will be able to get into flashmode. But i Can't get into flash mode. I wrote that when i hold volume down and connect phone to pc green led comes out(computer won't detect it) and after few sec. red led comes out and then phone just boots again into sony logo I have SEUS and PC Companion on my pc but these don't work because computer won't detect my phone.
P.S I've tired this method on Windows 7 and windows xp but they both didn't work
tauriuxx said:
It will be all good if I will be able to get into flashmode. But i Can't get into flash mode. I wrote that when i hold volume down and connect phone to pc green led comes out(computer won't detect it) and after few sec. red led comes out and then phone just boots again into sony logo I have SEUS and PC Companion on my pc but these don't work because computer won't detect my phone.
Click to expand...
Click to collapse
Have you installed drivers correctly? What operative system do you have in your computer?
If you have not, go to C:/flashtool/drivers and intall them (you have to check your device and 2 last options in the installer (fastboot and flashmode)
carlaba2 said:
Have you installed drivers correctly? What operative system do you have in your computer?
If you have not, go to C:/flashtool/drivers and intall them (you have to check your device and 2 last options in the installer (fastboot and flashmode)
Click to expand...
Click to collapse
Yes my drivers are installed correctly, the flashmode worked before when i flashed stock tft. After flashing stock tft i installed a custom rom, then i went into cwm and accidentaly formated the system. I have Windows 7 x64 on my pc.
tauriuxx said:
Yes my drivers are installed correctly, the flashmode worked before when i flashed stock tft. After flashing stock tft i installed a custom rom, then i went into cwm and accidentaly formated the system. I have Windows 7 x64 on my pc.
Click to expand...
Click to collapse
I'm sorry that's all my knowledge for now, hope someone else in here can help you with this. If I were you, I'd try installing flashtool and drivers from scratch on another PC.
carlaba2 said:
I'm sorry that's all my knowledge for now, hope someone else in here can help you with this. If I were you, I'd try installing flashtool and drivers from scratch on another PC.
Click to expand...
Click to collapse
Whatever Anyway thanks for help. I'm going to leave my phone turned on all night so it will totaly discharge and then i will try to charge it and put into flashmode. Maybe this will work. I'll post the results if i'll fix my xp.
Phone is working!
When i tried discharging phone, that didn't help so i gave my phone to my friends dad because he is a good phone technican, and fixer. So what he did? That was akward moment :laugh:
1. When he conected phone to his pc (win xp) the computer detected my phone (my computer wasn't able to detect)
2. Then he just flashed some files. But not with Flashtool. He used program called SE2tools or something like that.
3. The phone booted up and now is working sucessfully
tauriuxx said:
When i tried discharging phone, that didn't help so i gave my phone to my friends dad because he is a good phone technican, and fixer. So what he did? That was akward moment :laugh:
1. When he conected phone to his pc (win xp) the computer detected my phone (my computer wasn't able to detect)
2. Then he just flashed some files. But not with Flashtool. He used program called SE2tools or something like that.
3. The phone booted up and now is working sucessfully
Click to expand...
Click to collapse
I think it was a driver problem after all. Next time if you have this problem again, even if you have already installed the drivers, try uninstalling and installing again... Windows is crazy , especially win8 which I'm hating more everyday lol
carlaba2 said:
Install stock ICS using flashtool (in flashmode):
1. Download stock ICS
2. open flashtool
3. click on the ray
4. select flashmode
5. Click on browse to look for the ICS firmware you downloaded
6. Select "flash"
7. When it asks you for it, hold your devices volume down button and connect it to the PC
8. Wait for flash to end
After doing this you will be able to boot into ICS, if you want to access CWM, you'll have to install it again
Click to expand...
Click to collapse
Hi,
I also committed the same mistake. Experiencing the same issue.
Please give a link to download the Stock ICS rom for Xperia Sola and Flashtool & its driver, so I can try your steps and make my phone work.
Thanks,
Irfan
saeedirfaan said:
Hi,
I also committed the same mistake. Experiencing the same issue.
Please give a link to download the Stock ICS rom for Xperia Sola and Flashtool & its driver, so I can try your steps and make my phone work.
Thanks,
Irfan
Click to expand...
Click to collapse
If you're boot loader is lockes you can use SUS then create the FTF file to flash with flashtool next time you need it.
If it's unlocked, use PCC to repair until the stage it ask you to connect the phonem then build the firmware FTF to flash with flashtool.
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Sola got stuck at Sony Boot Logo
ChikeD said:
If you're boot loader is lockes you can use SUS then create the FTF file to flash with flashtool next time you need it.
If it's unlocked, use PCC to repair until the stage it ask you to connect the phonem then build the firmware FTF to flash with flashtool.
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Click to expand...
Click to collapse
Placed the ROM.zip in sd card and did a full wipe. In my CWM, there is no option to go back, hence rebooted the system to install the ROM after full wipe. My phone got stuck at Sony logo and even unable to access CWM. Please help!
I did the following steps mentioned in the ROM page of XDA to install the custom ROM on my phone.
1. Flash boot.img from .zip via Fastboot ---- LEFT OUT THIS ONLY STEP BY MISTAKE and done the subsequent steps.
2. Enter CWM
3. Make a full wipe:
4. Wipe Data/Factory Reset
5. Wipe Cache
6. Wipe Dalvik Cache
7. format /data (advanced)
8. format /dache (advanced)
9. format /system (advanced)
-Flash ROM. --- YET TO FLASH THE ROM.
I'm unable to access CWM. I can't power off, I can only restart, but getting stuck at Sony logo everytime.
---------- Post added at 06:36 PM ---------- Previous post was at 06:24 PM ----------
ChikeD said:
If you're boot loader is lockes you can use SUS then create the FTF file to flash with flashtool next time you need it.
If it's unlocked, use PCC to repair until the stage it ask you to connect the phonem then build the firmware FTF to flash with flashtool.
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Click to expand...
Click to collapse
Installed Flashtool version 0.9.13.0 - Windows in 'C' drive. In that, installed Xperia Sola, Flashmode, Fastboot mode drivers. Drained all the charge and my phone was switched off. Launched the Flashtool, connected my switched off device to PC through USB holding the Volume Up key, and followed the steps (Click 1 to Click 8) as mentioned in the below link:
http://forum.xda-developers.com/showthread.php?t=1963961
When I did Click 4, I got an error in the Flashtool saying, This action needs a connected device in ADB mode.
When I did Click 5, I got an error in the Flashtool saying, This action can only be done in fastboot mode.
When I hold Volume Up/Down key and connect to PC through USB, only red LED lights up. It is not connecting to Fastboot mode, and neither to Flashmode. Please help!
Thanks.
saeedirfaan said:
Placed the ROM.zip in sd card and did a full wipe. In my CWM, there is no option to go back, hence rebooted the system to install the ROM after full wipe. My phone got stuck at Sony logo and even unable to access CWM. Please help!
I did the following steps mentioned in the ROM page of XDA to install the custom ROM on my phone.
1. Flash boot.img from .zip via Fastboot ---- LEFT OUT THIS ONLY STEP BY MISTAKE and done the subsequent steps.
2. Enter CWM
3. Make a full wipe:
4. Wipe Data/Factory Reset
5. Wipe Cache
6. Wipe Dalvik Cache
7. format /data (advanced)
8. format /dache (advanced)
9. format /system (advanced)
-Flash ROM. --- YET TO FLASH THE ROM.
I'm unable to access CWM. I can't power off, I can only restart, but getting stuck at Sony logo everytime.
---------- Post added at 06:36 PM ---------- Previous post was at 06:24 PM ----------
Installed Flashtool version 0.9.13.0 - Windows in 'C' drive. In that, installed Xperia Sola, Flashmode, Fastboot mode drivers. Drained all the charge and my phone was switched off. Launched the Flashtool, connected my switched off device to PC through USB holding the Volume Up key, and followed the steps (Click 1 to Click 8) as mentioned in the below link:
http://forum.xda-developers.com/showthread.php?t=1963961
When I did Click 4, I got an error in the Flashtool saying, This action needs a connected device in ADB mode.
When I did Click 5, I got an error in the Flashtool saying, This action can only be done in fastboot mode.
When I hold Volume Up/Down key and connect to PC through USB, only red LED lights up. It is not connecting to Fastboot mode, and neither to Flashmode. Please help!
Thanks.
Click to expand...
Click to collapse
Dude your a bit confused.
The only thing you may need flashtoo is first step (Flash boot.img from .zip via Fastboot ) all the rest is done in CWM recovery.
I don't know who told you to drain your baterry, but do not ever flash anything with baterry less than 50 percent, prefferrably fully charged.
Flash stock first, copy the zip to your SD card, then follow steps 1-9+.
For step 1 you need to extract boot.img from the rom zip on your pc.
To enter CWM recovery (after you flashed the boot.img), while device is booting (Sony LOGO) press volume down every second or so untill you are in CWM.
To nevigate in CWM, select - home key or power, move down - volume down or menu key, move up - volume up, exit/return to previous menu - back key or select at the bottom of the menu.
Stuck at Sony logo!
ChikeD said:
Dude your a bit confused.
The only thing you may need flashtoo is first step (Flash boot.img from .zip via Fastboot ) all the rest is done in CWM recovery.
I don't know who told you to drain your baterry, but do not ever flash anything with baterry less than 50 percent, prefferrably fully charged.
Flash stock first, copy the zip to your SD card, then follow steps 1-9+.
For step 1 you need to extract boot.img from the rom zip on your pc.
To enter CWM recovery (after you flashed the boot.img), while device is booting (Sony LOGO) press volume down every second or so untill you are in CWM.
To nevigate in CWM, select - home key or power, move down - volume down or menu key, move up - volume up, exit/return to previous menu - back key or select at the bottom of the menu.
Click to expand...
Click to collapse
No No bro listen, I did a mistake while installing the Custom ROM.
I forgot to flash the boot.img and did full wipe even formatted the system. Rebooted the system without installing the ROM. Now, stuck at Sony Logo. (NOTE: During this I had the battery charged full)
To rectify the above issue, I tried to flash the boot.img through fastboot mode in Flashtool and install the Custom ROM through CWM. To connect to flashtool, the device should be switched off. Now, I cant switch off. I can only restart. Hence, I drained the battery completely and tried to connect to Flashtool. When I hold Volume Up key and connect to PC through USB, only red LED lights up. It is not connecting to Fastboot mode, also when holding Volume Down key and connect to PC through USB, only red LED lights up. It is not connecting to Flashmode.
Please help!
Thanks.
saeedirfaan said:
No No bro listen, I did a mistake while installing the Custom ROM.
I forgot to flash the boot.img and did full wipe even formatted the system. Rebooted the system without installing the ROM. Now, stuck at Sony Logo. (NOTE: During this I had the battery charged full)
To rectify the above issue, I tried to flash the boot.img through fastboot mode in Flashtool and install the Custom ROM through CWM. To connect to flashtool, the device should be switched off. Now, I cant switch off. I can only restart. Hence, I drained the battery completely and tried to connect to Flashtool. When I hold Volume Up key and connect to PC through USB, only red LED lights up. It is not connecting to Fastboot mode, also when holding Volume Down key and connect to PC through USB, only red LED lights up. It is not connecting to Flashmode.
Please help!
Thanks.
Click to expand...
Click to collapse
No you do not need to drain the baterry, nor do you need to shut down the phone.
In the link you have provided it shows you how to boot into fastboot via adb (Click 4).
Recharge your phone and follow the steps given there.
Stuck at Sony logo!
ChikeD said:
No you do not need to drain the baterry, nor do you need to shut down the phone.
In the link you have provided it shows you how to boot into fastboot via adb (Click 4).
Recharge your phone and follow the steps given there.
Click to expand...
Click to collapse
I did the following things:
Set USB Debugging On from Settings - Developer Options.
Connect the phone to the PC. - My Phone is ON, but stuck at Sony Boot Logo
Click 1 - Click the Lightning icon.
Select 2 - Select the Fastboot Mode.
Click 3 - Click Ok.
Click 4 - Select Reboot Into Fastboot Via Adb and wait for the phone to go into fastboot mode. (Blue led). - Gets Error: This action needs a connected device in ADB mode
Click 5 - Select Reboot Into Fastboot Via Fastboot and wait for the phone to go into fastboot mode. (Blue led). - Gets Error: This action can only be done in fastboot mode
Click 6 and 7 - Select the boot.img or kernel.elf or kernel.sin. - Gets Error: This action can only be done in fastboot mode
Click 8 - Reboot phone. After reboot, the phone will be in recovery mode. - Gets Error: This action can only be done in fastboot mode
Please Help!
Irfan
saeedirfaan said:
I did the following things:
Set USB Debugging On from Settings - Developer Options.
Connect the phone to the PC. - My Phone is ON, but stuck at Sony Boot Logo
Click 1 - Click the Lightning icon.
Select 2 - Select the Fastboot Mode.
Click 3 - Click Ok.
Click 4 - Select Reboot Into Fastboot Via Adb and wait for the phone to go into fastboot mode. (Blue led). - Gets Error: This action needs a connected device in ADB mode
Click 5 - Select Reboot Into Fastboot Via Fastboot and wait for the phone to go into fastboot mode. (Blue led). - Gets Error: This action can only be done in fastboot mode
Click 6 and 7 - Select the boot.img or kernel.elf or kernel.sin. - Gets Error: This action can only be done in fastboot mode
Click 8 - Reboot phone. After reboot, the phone will be in recovery mode. - Gets Error: This action can only be done in fastboot mode
Please Help!
Irfan
Click to expand...
Click to collapse
Turn the phone off, no need to drain battery, just press power + volume up until you feel 1 + 3 vibrations, open flashtool and connect in fastboot mode (volume up while connecting USB)
Do you see device connected in fasboot mode in flashtool log?
Did you install fastboot drivers from flashtool?
What is you windows version?
Got it Worked!
ChikeD said:
Turn the phone off, no need to drain battery, just press power + volume up until you feel 1 + 3 vibrations, open flashtool and connect in fastboot mode (volume up while connecting USB)
Do you see device connected in fasboot mode in flashtool log?
Did you install fastboot drivers from flashtool?
What is you windows version?
Click to expand...
Click to collapse
Nothing worked, anyway thanks bro.
I gave the phone to the technician and he made it to work. Now, I have sony xperia sola running 6.1.1.b.1.10 firmware. I am unable to update it to 6.1.1.b.1.54, error displaying as unable to communicate with sony. No Root, No CWM, just an unlocked bootloader.
Now, please tell how to root from here (6.1.1.b.1.10 firmware) and install CWM and flash some new custom ROMs.
Thanks,
Irfan
Well, i've flashed the ftf file downloaded directly from xperifirm {E2306_26.3.A.0.131_R2C_Customized GEL_1294-3902}
-update-
some mysterious, magical stuff hapened and i entered fastbootmode
can boot recovery and boot.img from fastboot and now everything is fine
<3
thanks everyone
then, i've try to install root (following a tutorial for this device and this comp.) but i could not enter to FASTBOOT MODE
try using:
- (vol+) + (plug the phone)
-(power btn) + (vol+) + (plug the phone)
-(power btn) + (vol+) + (vol-) + (plug the device)
and the only thing that happened is: -Vibrate + sony logo ---> normal boot
----
Then i try to enter fastboot using the adb command {ADB REBOOT-BOOTLOADER}
but it just reboot normally (sony logo and then start normally)
[[ADB do recognize my device and all drivers were properly installed; but can't enter to fastboot mode]]
---
I've try to reflash my device again, but then i couldn't be able to enter to flashmode
{ with the device off; press vol- and then connect to usb}
after several attempts using - [(power btn) + (vol-)] i entered flashmode and reflash my device...
----
then i activate dev mode: [usb debuggin and OEM UNLOCK]
and try to get to fastboot mode, but the same results...
i got my device recognized by {ADB DEVICES}
but can't get fastboot
-----
Then the user who's helping me told me to reflash using this config
[in excludes section check all except AMSS_FSG, AMS_FS1, AMS_FS2,BOOT DELIVERY, KERNEL. Don't check anything else.]
But i can't get flashmode now... i try all the combinations, try in ubuntu 16, and windows 10... but nothing
the device starts normally nothing wrong.... except well, i can't enter any -mode- now...
any help?
Thanks
try enable usb debugging. go to setting, about phone, then scroll to build number. tap it repeadly till developer option appear on setting. set enable usb debugging there. and try flash it again.
I can't get anything to start!
~~~~
...Well said:
]
---
~~~~I've try to reflash my device again, but then i couldn't be able to enter to flashmode
~~~~{ with the device off; press vol- and then connect to usb}
~~~~after several attempts using - [(power btn) + (vol-)] i entered flashmode and reflash my device...
----
~~~~then i activate dev mode: [usb debuggin and OEM UNLOCK]
~~~and try to get to fastboot mode, but the same results...
~~~~i got my device recognized by {ADB DEVICES}
~~~~but can't get fastboot
-----
.~~~~.. nothing wrong.... except well, i can't enter any -mode- now..
~~~~any help?
~~~~Thanks
Click to expand...
Click to collapse
[~~~~QUOTE=shouqinz;67837866]try enable usb debugging. go to setting, about phone, then scroll to build number. tap it repeadly till ~~~~developer option appear on setting. set enable usb debugging there. and try flash it again.[/QUOTE]
Girlfriend tried to update her Sony Aqua M4 e2306...
she says that the boot loader was unlocked, and she installed the twrp update... and the root check came back rooted.... she powered off the phone and put it on a charger. ...
a few hours later she tried to restart it and only got the Sony Xperia screen then reboot loop.
I've spent 2 days reading everything that i can find and trying various solutions but most won't work because it won't stay connected long enough to use companion, adb, fastboot, bootloader, etc. When the devices is seen by pc it is only for a moment and comes up as a generic MTP device or a hard drive i can't open.
I can get the occasional green or blue lights and sometimes a generic battery symbol by powering off and pressing + or - with power, but never get a recovery or boot load screen... only alternating "sony Xperia" and darkness
also, Emily won't update.
I've tried multiple solutions using different versions of SDK, ADB, sony and xperia Companion, fastboot, bootloader, odin, pwm, and more on multiple machines from XP to Win10, but nothing seems to even make a dent!
I've removed the back and disconnected the battery for 2 hours and am currently trying to research a more physical hack/repair using riff jtag.
i see many people with "boot loop" issue , but no one seems to follow through and say how to get out if you don't have the option of booting to anything....
merwinaleman said:
Well, i've flashed the ftf file downloaded directly from xperifirm {E2306_26.3.A.0.131_R2C_Customized GEL_1294-3902}
then, i've try to install root (following a tutorial for this device and this comp.) but i could not enter to FASTBOOT MODE
try using:
- (vol+) + (plug the phone)
-(power btn) + (vol+) + (plug the phone)
-(power btn) + (vol+) + (vol-) + (plug the device)
and the only thing that happened is: -Vibrate + sony logo ---> normal boot
----
Then i try to enter fastboot using the adb command {ADB REBOOT-BOOTLOADER}
but it just reboot normally (sony logo and then start normally)
[[ADB do recognize my device and all drivers were properly installed; but can't enter to fastboot mode]]
---
I've try to reflash my device again, but then i couldn't be able to enter to flashmode
{ with the device off; press vol- and then connect to usb}
after several attempts using - [(power btn) + (vol-)] i entered flashmode and reflash my device...
----
then i activate dev mode: [usb debuggin and OEM UNLOCK]
and try to get to fastboot mode, but the same results...
i got my device recognized by {ADB DEVICES}
but can't get fastboot
-----
Then the user who's helping me told me to reflash using this config
[in excludes section check all except AMSS_FSG, AMS_FS1, AMS_FS2,BOOT DELIVERY, KERNEL. Don't check anything else.]
But i can't get flashmode now... i try all the combinations, try in ubuntu 16, and windows 10... but nothing
the device starts normally nothing wrong.... except well, i can't enter any -mode- now...
any help?
Thanks
Click to expand...
Click to collapse
did you flashed hole ftf using flashtool or only the mencioned partitions above?
PiSpecialist said:
did you flashed hole ftf using flashtool or only the mencioned partitions above?
Click to expand...
Click to collapse
I still can't enter any-mode, so i haven't flash any ftf
me too
merwinaleman said:
I still can't enter any-mode, so i haven't flash any ftf
Click to expand...
Click to collapse
Same Here - is there no-one willing to help?!?
anyone know how to physically cause a device to self test, or reload defaults, ....or.... boot from sd by shorting a pin OR SOMETHING???
grrr - help:crying:
well... a little progress after 100s of reboot attempts!
i see a HD in the Device manager.
I can't access the disk, but it isn't constantly rebooting..
any one have a suggestion for my next move?
Error 7/24/2016 8:40:41 AM DeviceSetupManager 121 None
Device USBSTOR\Disk&Ven_SONY&Prod_Mass_storage&Rev_0310\YT9115VK6R&0 was configured.
Driver Name: disk.inf
Class Guid: {4d36e967-e325-11ce-bfc1-08002be10318}
Driver Date: 06/21/2006
Driver Version: 10.0.10586.0
Driver Provider: Microsoft
Driver Section: disk_install.NT
Driver Rank: 0xFF0006
Matching Device Id: GenDisk
Outranked Drivers: disk.inf:GenDisk:00FF2002
Device Updated: false
Parent Device: USB\VID_0FCE&PID_E1AD\YT9115VK6R
...still need help....
-update-
some mysterious, magical stuff hapened and i entered fastbootmode
can boot recovery and boot.img from fastboot and now everything is fine
<3
thanks everyone
merwinaleman said:
-update-
some mysterious, magical stuff hapened and i entered fastbootmode
can boot recovery and boot.img from fastboot and now everything is fine
<3
thanks everyone
Click to expand...
Click to collapse
dude... PLEASE tell me what mysterious, magical stuff happened?!?!!?!?!? I've been having exactly your issue for days now and can't get past it!!! Please
Ugh. I'm having the same problem. Magical stuff isn't very helpful :/
Boot loop
trechurch said:
~~~~
[~~~~QUOTE=shouqinz;67837866]try enable usb debugging. go to setting, about phone, then scroll to build number. tap it repeadly till ~~~~developer option appear on setting. set enable usb debugging there. and try flash it again.
Click to expand...
Click to collapse
Girlfriend tried to update her Sony Aqua M4 e2306...
she says that the boot loader was unlocked, and she installed the twrp update... and the root check came back rooted.... she powered off the phone and put it on a charger. ...
a few hours later she tried to restart it and only got the Sony Xperia screen then reboot loop.
I've spent 2 days reading everything that i can find and trying various solutions but most won't work because it won't stay connected long enough to use companion, adb, fastboot, bootloader, etc. When the devices is seen by pc it is only for a moment and comes up as a generic MTP device or a hard drive i can't open.
I can get the occasional green or blue lights and sometimes a generic battery symbol by powering off and pressing + or - with power, but never get a recovery or boot load screen... only alternating "sony Xperia" and darkness
also, Emily won't update.
I've tried multiple solutions using different versions of SDK, ADB, sony and xperia Companion, fastboot, bootloader, odin, pwm, and more on multiple machines from XP to Win10, but nothing seems to even make a dent!
I've removed the back and disconnected the battery for 2 hours and am currently trying to research a more physical hack/repair using riff jtag.
i see many people with "boot loop" issue , but no one seems to follow through and say how to get out if you don't have the option of booting to anything....[/QUOTE]
I have the same issue. I have an unlocked bootloader and booted with boot.img. everything was fine for a day or two, and when I started to factory reset my phone it is causing bootloop issues. sony logo and black screen. It never appears on my computer when connected to use adb. Any idea on how to fix this?
My mob is not able to flsh the stock rom......der s a error showing cannot open bundle....help me out plz
When i do VolumeUp & connect my phone it connects to windows with blue led on phone and after ~6 seconds it just disconnects and shows battery charging thing
Try this, jesus bless you
merwinaleman said:
Well, i've flashed the ftf file downloaded directly from xperifirm {E2306_26.3.A.0.131_R2C_Customized GEL_1294-3902}
-update-
some mysterious, magical stuff hapened and i entered fastbootmode
can boot recovery and boot.img from fastboot and now everything is fine
<3
thanks everyone
then, i've try to install root (following a tutorial for this device and this comp.) but i could not enter to FASTBOOT MODE
try using:
- (vol+) + (plug the phone)
-(power btn) + (vol+) + (plug the phone)
-(power btn) + (vol+) + (vol-) + (plug the device)
and the only thing that happened is: -Vibrate + sony logo ---> normal boot
----
Then i try to enter fastboot using the adb command {ADB REBOOT-BOOTLOADER}
but it just reboot normally (sony logo and then start normally)
[[ADB do recognize my device and all drivers were properly installed; but can't enter to fastboot mode]]
---
I've try to reflash my device again, but then i couldn't be able to enter to flashmode
{ with the device off; press vol- and then connect to usb}
after several attempts using - [(power btn) + (vol-)] i entered flashmode and reflash my device...
----
then i activate dev mode: [usb debuggin and OEM UNLOCK]
and try to get to fastboot mode, but the same results...
i got my device recognized by {ADB DEVICES}
but can't get fastboot
-----
Then the user who's helping me told me to reflash using this config
[in excludes section check all except AMSS_FSG, AMS_FS1, AMS_FS2,BOOT DELIVERY, KERNEL. Don't check anything else.]
But i can't get flashmode now... i try all the combinations, try in ubuntu 16, and windows 10... but nothing
the device starts normally nothing wrong.... except well, i can't enter any -mode- now...
any help?
Thanks
Click to expand...
Click to collapse
1. Turn off OEM Unlock
2. Keep USB Debugging on
3. Enter Fastboot mode
4. Done
5. Jesus Bless You
Thymue said:
When i do VolumeUp & connect my phone it connects to windows with blue led on phone and after ~6 seconds it just disconnects and shows battery charging thing
Click to expand...
Click to collapse
I'm having the same issue.
Anoyone knows how to fix? Maybe is a problem of the cable?
PD: Tested with official cabled and turning Off OEM unlock and still the same.
iFlashed said:
I'm having the same issue.
Anoyone knows how to fix? Maybe is a problem of the cable?
PD: Tested with official cabled and turning Off OEM unlock and still the same.
Click to expand...
Click to collapse
also for me :´(
Thales720 said:
also for me :´(
Click to expand...
Click to collapse
Not sure what your problem is exactly but it is most likely a problem with the cable or the s1 driver's(if your using window's?) one or the other ,
However i need to point out that you must have your OEM lock at the SWITCHED ON position(allow the device to be oem unlocked) or you will trip the frp at the next reboot and will have to reflash your firmware unnecessarily , so to sum up Oem unlock at the switched on position
Hi7m3up said:
Not sure what your problem is exactly but it is most likely a problem with the cable or the s1 driver's(if your using window's?) one or the other ,
However i need to point out that you must have your OEM lock at the SWITCHED ON position(allow the device to be oem unlocked) or you will trip the frp at the next reboot and will have to reflash your firmware unnecessarily , so to sum up Oem unlock at the switched on position
Click to expand...
Click to collapse
the drivers are all installed correctly, I tried doing this with the OEM off and on and it did not work
none of the methods works, adb does normal boot
recovery reboot (and other apps) crash or boot normal too
volume (+) and power button only makes the phone vibrate (and sometimes the Sony logo appears)
I can't stress to you enough that Enable Oem need's to be on the "on position" so switch it on (allow the device to be oem unlocked)and leave it alone it's nothing to do with you not being able to get to fastboot. If you trip the frp on your phone you will not be pleased.
with that said with your phone switched on and USB DEBUGGING SWITCHED ON plug into your usb on computer open a command window and input the following command- adb reboot bootloader you will now see your blue light on the phone this means your sony is now ready for you to flash a custom recovery (assuming you have unlocked your bootloader ?)