Hello friends, how are you?
I'm from Portugal, and i have one nice strek 5 working great.
But i have another two, that don't boot, it stuck on delll Logo.
i think another my friends try to root or update, and fail.
it don't make any fast boot or streak mod.
so i disassemble to read its sd card.
because i'm using windows, so i install DiskInternalls Linux Reader to have acess to sd card files.
When mounted, its show two volumes, "Linux Ext Volume 1" and "Linux Ext Volume 2"
the firs one have 244 Mbs, and the other one have 1.65Gb
the small one have two folders, lost+found, recovery and a lot of jpeg files in root folder.
the second one, that have 1.65Gb, have a lot od folders and semms a lot of a zipped rom image.
Its possible just decompress and copy to the volume?
Thanks
If you format the card and put it back in the streak, it should set it up automatically. However, you will lose anything on it this way.
Ok. i will try..
but, it don't need to write some data in "boot area" ?
I'm asking that, becouse i download 3 roms, all ziped, but easy to see files, i also download streak mod, and has only one img file, it can't be unzipped..
my firts idea, was copy streak boot files, to card, but i can't acess it..
My assumption, and it is only an assumption, is there is some sort of actual rom memory on the phone that holds the lowest levels of the operating system. Maybe fastboot and the recovery menu, but not recovery itself. The rom actually resides on the internal sd card. When I put in my freshly formatted sd card, I simply rebooted the phone and I don't remember if it was automatic, or I had to confirm it, but the streak partitioned/formatted/whatever the internal sd card itself. I then flashed a recovery and a rom.
Hello.
like you said, i have insert a new sd card, but formated in FAT, i think thats the problem.
I try to load Linux Live CD, and format in ext2/3.
or try to copy rom directly file to sd card.
You think might work?
***EDIT***
I have format the card, and i have inserted into sreak and turn it on..
How much time is preparing the new card ?
and how i know that is ready to reboot?
thanks
I have created an image of my inner SD Card right after a factory reset.
Download Here
I created this using Clonezilla, you should be able to use Clonezilla to restore it. It is an image of the entire sd card. You need to unzip the downloaded file to use it.
Note: I am running DSC_Rom, which is Gingerbread based. I don't think it makes a difference.
marvin02 said:
I have created an image of my inner SD Card right after a factory reset.
Download Here
I created this using Clonezilla, you should be able to use Clonezilla to restore it. It is an image of the entire sd card. You need to unzip the downloaded file to use it.
Note: I am running DSC_Rom, which is Gingerbread based. I don't think it makes a difference.
Click to expand...
Click to collapse
cannot start clonezilla iso
slav_pu6 said:
cannot start clonezilla iso
Click to expand...
Click to collapse
You burn the .iso file to a cd and boot it.
Related
Hi,
Since I mostly use Linux and Mac OS X, it's not very easy for me to flash my TyTN. There is an article in XDA-Wiki which describes a way to flash my device from the SD card, but it mentions formatting the card before doing the upgrade.
Is it absolutely needed to do so? I have lots of files in my card and I don't want to move them every time before I flash my phone.
Thanks in advance for your answers.
AFAIK, as long as your card is formatted in FAT32, then it should work.
CRCinAU said:
AFAIK, as long as your card is formatted in FAT32, then it should work.
Click to expand...
Click to collapse
Thanks for your answer, a test will convince me ...
i can confirm that you don't need to format it as long as it's FAT32. I can't flash ROMS at work for some reason (no admin privileges, i suspect) and so I occasionally flash from my SD card. It actually works really well.
Above posts are corre correct. I flash from SD card all the time, in fact i have NEVER used a cable to flash my phone. As long as the SD card has been formatted as fat32 you can flash from it without removing other files. I keep all my cabs, sms\contacts backup, files, contact pics, etc. in folders on the SD and then copy the .NBH file to the root of the card and flash away, makes it easy to change ROM's with minimal fuss and can even be done without a computer. About two weeks ago I found myself stuck in an airport and downloaded a new rom via airport wi-fi, extracted nbh file with pocket rar, renamed and saved to SD and viola, new ROM.
I confirm that too. What you absolutely need is to have it formatted in FAT32. SDcard flashing is the only way i use too. BUT... (yes... there is a ...but...) it happens that the "hermimg.nbh" is not detected if it is not one of the first files on your card. In this case, when you "hardreset", no file will be found. This is why i recommand to format it before.
I successfully rooted my Nook Tablet and installed CM 7. However I foolishly applied a zip update that was not compatible and now I'm stuck in a boot loop.
My CWM bootable SD card refuses to work no matter what. I've followed the steps exactly as stated :
1. Using GParted on Ubuntu
2. I selected No-Free space preceding partition while partitioning
3. 50MB
4. FAT 32
5. Boot and LBA flags
6. Copied files
I don't know what to do to to make it work. I've tried all sorts of minor variations in partitioning the card but nothing appears to make the SD card work.
Can someone please help me?
Use Adam Outler's Ubuntu recovery image. He provides step by step instructions on how to unzip the image and transfer it onto the sd card. Have to use linux so if your on a Windows pc, then go grab you a cd or usb bootable copy of Ubuntu. The restoration process takes a while and seems like it hangs in spots but have patience. It takes somewhere around 20 minutes for it to complete but in the end you will be back on stock 1.4.0, safe and sound....Good Luck.
Alright well, I managed to get CWM working. Apparently my SD Card was just fine - I just needed to make sure the NT was plugged into a computer at the same time.
Now my question is : how do I get things working again? I had previously thought that I could simply flash CM 7 again and this would fix the issue, but now I realize that for some reason CWM only read from the 50MB partition from which it booted. Changing the SD card after booting into CWM doesn't work either.
So what do I do? Thanks again..
Nevermind. What I did was pushed the recovery to the internal card so that I didn't need the SD card to boot into recovery. I then reformatted my card and dumped the CM7 zip onto it. Then reflashed CM7. Voila.
somebody9 said:
Alright well, I managed to get CWM working. Apparently my SD Card was just fine - I just needed to make sure the NT was plugged into a computer at the same time.
Now my question is : how do I get things working again? I had previously thought that I could simply flash CM 7 again and this would fix the issue, but now I realize that for some reason CWM only read from the 50MB partition from which it booted. Changing the SD card after booting into CWM doesn't work either.
So what do I do? Thanks again..
Click to expand...
Click to collapse
Glad to read you got it working.
Just wanted to comment on the above.
You can boot the SD version of cwm then remove the SD card. This is exactly how I installed CM7 That I'm currently running.
It didn't take the first time as cwm didn't read my SD. But after a repartition of the SD csrdz no problems.
todbanner said:
Glad to read you got it working.
Just wanted to comment on the above.
You can boot the SD version of cwm then remove the SD card. This is exactly how I installed CM7 That I'm currently running.
It didn't take the first time as cwm didn't read my SD. But after a repartition of the SD csrdz no problems.
Click to expand...
Click to collapse
I actually tried taking the SD card out, reformatting it and then trying to get it to read but for some reason CWM just doesn't do it. Maybe I should have tried a few more times...
I want to install CM7 internal rom but fail to boot from SD after I increase the card space to full capacity. The screen remains black for 20-30 seconds after plugging the cable. And then it will bypass the CWM and launch directly to rooted OS. However, I cannot place the ROM without resizing the card space.
One more question: is it safe to remove the SD card after the system is booted into CWM mode?
Any advice to install CM7 will be much appreciated
Thanks in advanced.
adlist said:
I want to install CM7 internal rom but fail to boot from SD after I increase the card space to full capacity. The screen remains black for 20-30 seconds after plugging the cable. And then it will bypass the CWM and launch directly to rooted OS. However, I cannot place the ROM without resizing the card space.
One more question: is it safe to remove the SD card after the system is booted into CWM mode?
Any advice to install CM7 will be much appreciated
Thanks in advanced.
Click to expand...
Click to collapse
Yes, Then just put another card in and zip off of that .
adlist said:
I want to install CM7 internal rom but fail to boot from SD after I increase the card space to full capacity. The screen remains black for 20-30 seconds after plugging the cable. And then it will bypass the CWM and launch directly to rooted OS. However, I cannot place the ROM without resizing the card space.
One more question: is it safe to remove the SD card after the system is booted into CWM mode?
Any advice to install CM7 will be much appreciated
Thanks in advanced.
Click to expand...
Click to collapse
I had the same issue with a few cwm image files. Finally found the cwm files in zip format. Then I just copied them to the root of a blank SD card. I will try to zip them and upload them somewhere tomorrow. Its nice to have an 8gb cwm card.
Thanks guys. Yes a 8gb CWM image will be useful. Anyway, I just copy the CM7 beta zip file to the device internal memory and get it installed. Despite some technical errors (like google play not working), CM7 runs fine basically.
Ugh. Managed to trash my partitions and spent the most of the night learning a crash course of adb. Got things back to normal now. Will try to find my SD stuff tomorrow! Sorry for the delay!
Sent from my Nook Tablet using xda app-developers app
EDIT! --
Right, so FINALLY got my NT back to proper working order.
I'm pretty sure I downloaded this file FROM these forums, however, a few searches turned up nothing, so I dropboxed them.
Here
Format your SD card, giving yourself the full partition to work with. Then unzip that file, and copy the contents (4 items, 1 folder) to the ROOT of the SD card.
That will make your SD card bootable, and acutomatically load the CWM recovery stuff. From there, you can backup your NT's current config.
Also, RE: your Google Play issue, you need to install the proper Gapps for your ROM,
To do that, click HERE then go down to the bottom of the first post, that's Veronica, and she rocks. I've learned more from her about all this stuff than most anyone else, and we've never talked.
ANYHOW. Go to the bottom of her post, and see her "My XDA FTP" link? Click that ( I didnt want to direct link it without her permission).
In there, you'll see a folder called gapps, navigate to there, and down load the gapps-gb-20110828... zip file. Copy that to your shiny, new CWM recovery SD card, and then boot from it, "install zip from SD card" "choose zip" choose that zip file, install it, and you'll have access to the google play (after market updates automatically) and all the other google features!
I am new at rooting, this is the first device I have tried to root. I followed the thread for a triple boot CM7 , CM9 and CM10 (also stock OS) from Malloneem. I decided to only flash CM7 and CM10 to NT 1.4.3. Everything worked great, except during the initial setup of both CM7 and CM10 it will not recognize my WiFi. I have tried twice, after first time I wiped NT and reformatted the sd card and started from scratch. same result both times.
I read through the replies and noticed that someone else had the same problem. the response said to wipe the cache and it should fix the dalvik. I wiped both the cache then tried and then wiped the dalvik and had the same results. With the CM10 it says "turning on wifi" and stays there.
I am a new member to xda so I cannot post a reply to the original thread.
Any help would be much appreciated.
If I cannot get this to work is there another method where you can use CM10 and stock OS? (something that is extreamly easy to follow)
Bears85 said:
I am new at rooting, this is the first device I have tried to root. I followed the thread for a triple boot CM7 , CM9 and CM10 (also stock OS) from Malloneem. I decided to only flash CM7 and CM10 to NT 1.4.3. Everything worked great, except during the initial setup of both CM7 and CM10 it will not recognize my WiFi. I have tried twice, after first time I wiped NT and reformatted the sd card and started from scratch. same result both times.
I read through the replies and noticed that someone else had the same problem. the response said to wipe the cache and it should fix the dalvik. I wiped both the cache then tried and then wiped the dalvik and had the same results. With the CM10 it says "turning on wifi" and stays there.
I am a new member to xda so I cannot post a reply to the original thread.
Any help would be much appreciated.
If I cannot get this to work is there another method where you can use CM10 and stock OS? (something that is extreamly easy to follow)
Click to expand...
Click to collapse
You can use this:
http://iamafanof.wordpress.com/2013...-1-jellybean-sdcard-img-for-nook-tablet-0110/
Write the image file to an SD card and you'll be good to go. You can use a repartitioning software to expand the partitions on your SD if you want. Use the instructions on the link I provided.
The SD card image will contain CM10.1 4.1.2. If you want to use a different ROM you can download the SDC version of any ROM ( has to be SDC!), place the zip on your SD card or internal storage. Boot into SDC recovery and installed the zip file. You'll need the GAPPS zip also (which has to be SDC also.)
Thank you for the help. My appologies for the redundant question but when I flash this ROM I will be able to bounce between CM10 and the stock B& N OS correct?
Bears85 said:
Thank you for the help. My appologies for the redundant question but when I flash this ROM I will be able to bounce between CM10 and the stock B& N OS correct?
Click to expand...
Click to collapse
Yes. Because CM 10 will be on your SD card. Stock will be on your internal. If your internal partitions or anything is messed up ( maybe the reason you can't boot stock) you can tell from CM.
datallboy said:
Yes. Because CM 10 will be on your SD card. Stock will be on your internal. If your internal partitions or anything is messed up ( maybe the reason you can't boot stock) you can tell from CM.
Click to expand...
Click to collapse
Thank you again. I have read throught the instructions on the link you provided and I am a little confused on the partitioning part. As I mentioned before this is my first time rooting anything. The instructions on the triple boot regarding the partitioning of the sdc were clear giving sizes for the newly created partitions etc., I didn't see that on this link (unless I missed it). Could you explain it so a newbie can understand it?
Thanks.
Bears85 said:
Thank you again. I have read throught the instructions on the link you provided and I am a little confused on the partitioning part. As I mentioned before this is my first time rooting anything. The instructions on the triple boot regarding the partitioning of the sdc were clear giving sizes for the newly created partitions etc., I didn't see that on this link (unless I missed it). Could you explain it so a newbie can understand it?
Thanks.
Click to expand...
Click to collapse
Well is there any reason why you would like triple boot? You need a fairly good size SD card if you want three systems. I just provided the simplest way to run cm on the nook. Write the image to your SD card and it will make it boot able. If you want to triple boot then setup your SD card partitions like you had before, but you only need to install the zips as alt boots.
Again, you probably don't need triple boot. Cm10+ has everything you'll need.
datallboy said:
Well is there any reason why you would like triple boot? You need a fairly good size SD card if you want three systems. I just provided the simplest way to run cm on the nook. Write the image to your SD card and it will make it boot able. If you want to triple boot then setup your SD card partitions like you had before, but you only need to install the zips as alt boots.
Again, you probably don't need triple boot. Cm10+ has everything you'll need.
Click to expand...
Click to collapse
No, I dont need the triple boot. Being a newbie I may have misread something (probably the case) but the link you gave me directed me to partition the sd card. it was this portion that was not clear to me. I was referencing the directions for partitioning on the triple boot thread as a comparison. The site you gave me said to partition the card but gave reference as to how big to make each partition. I don't need the triple boot.
My kid uses the NT to help read (read to me, etc...) I wanted something to get more of a tablet feel while keeping the stock system as well.
Thank you again. I appreciate the help. I will look at it again.
Bears85 said:
No, I dont need the triple boot. Being a newbie I may have misread something (probably the case) but the link you gave me directed me to partition the sd card. it was this portion that was not clear to me. I was referencing the directions for partitioning on the triple boot thread as a comparison. The site you gave me said to partition the card but gave reference as to how big to make each partition. I don't need the triple boot.
My kid uses the NT to help read (read to me, etc...) I wanted something to get more of a tablet feel while keeping the stock system as well.
Thank you again. I appreciate the help. I will look at it again.
Click to expand...
Click to collapse
On the iamafanof site you can scroll down there will be an SDC image. There is a difference between the image and the zips. All you need to do is download the SDC image, write it go your SD card using an file writer ( win32 disk writer will do) and your SD card will be ready to boot. Put it in your nook and and it will boot cyanoboot and should automatically do a SDC boot. It takes a little bit for the first boot to start ( usually 2 or 3 minutes)
Once you get your nook to boot cm I can tell you how to expand your SD partitions to hold more apps.
If you still have problems with WiFi it may be a different problem ( shouldn't happen).
If you need help or need a step by step guide I can find one or make one for you.
datallboy said:
...
If you need help or need a step by step guide I can find one or make one for you.
Click to expand...
Click to collapse
Just in time, "hot off the press" (almost) step-by-step guide: http://iamafanof.wordpress.com/2013...-2-jellybean-sdcard-img-for-nook-tablet-0416/.
For a more stable ROM build, use the CM10.0 image dated 12/31 in cm-10-20121231-NOOKTABLET-acclaim-HD-SDC-img.rar posted at http://iamafanof.wordpress.com/2012/11/18/cm10-0-jellybean-sdcard-img-for-nook-tablet/.
datallboy said:
On the iamafanof site you can scroll down there will be an SDC image. There is a difference between the image and the zips. All you need to do is download the SDC image, write it go your SD card using an file writer ( win32 disk writer will do) and your SD card will be ready to boot. Put it in your nook and and it will boot cyanoboot and should automatically do a SDC boot. It takes a little bit for the first boot to start ( usually 2 or 3 minutes)
Once you get your nook to boot cm I can tell you how to expand your SD partitions to hold more apps.
If you still have problems with WiFi it may be a different problem ( shouldn't happen).
If you need help or need a step by step guide I can find one or make one for you.
Click to expand...
Click to collapse
Thank you for your help. I worked and was simple. If you could explain the partitioning that would be great. If not, its working just the way I want it.
Thank you again!!
Bears85 said:
Thank you for your help. I worked and was simple. If you could explain the partitioning that would be great. If not, its working just the way I want it.
Thank you again!!
Click to expand...
Click to collapse
You have 4 partitions on your SD card: boot, system, data, sdcard. Your boot partition holds the files the boot CM. This is where recovery, mlo, uboot, etc is. System holds files essential for the ROM to work.
The only two you need to worry about are data and SD. Your data partitions holds apps. That is when you download an app the files in the apk file are put there. This would be like your internal storage for any phone or tablet. SD card is like an external SD card for your phone or tablet. Its where extra data files, photos, music etc go.
Depending on what size of SD card you have determines how big you can expand your data or SD partition.
Using a partitioning software ( like GParted) you can change the partitions and expand them to the side you want. I have a 16 GB SD card. So I expanded my data partition to 4 GB, and the rest went to SD card. Its okay to delete data or SD partition to expand it, but don't delete boot or system because you'll have to reformat the card and write the image file to the card again ( and ain't nobody got time for that.)
datallboy said:
You have 4 partitions on your SD card: boot, system, data, sdcard. Your boot partition holds the files the boot CM. This is where recovery, mlo, uboot, etc is. System holds files essential for the ROM to work.
The only two you need to worry about are data and SD. Your data partitions holds apps. That is when you download an app the files in the apk file are put there. This would be like your internal storage for any phone or tablet. SD card is like an external SD card for your phone or tablet. Its where extra data files, photos, music etc go.
Depending on what size of SD card you have determines how big you can expand your data or SD partition.
Using a partitioning software ( like GParted) you can change the partitions and expand them to the side you want. I have a 16 GB SD card. So I expanded my data partition to 4 GB, and the rest went to SD card. Its okay to delete data or SD partition to expand it, but don't delete boot or system because you'll have to reformat the card and write the image file to the card again ( and ain't nobody got time for that.)
Click to expand...
Click to collapse
This worked great!! thanks for all your help!!
hello
trying to root to cm10
using this thread
http://forum.xda-developers.com/showpost.php?p=43326042&postcount=123
have some question:
Installing CM10.1 Internally on Nook Tablet
Using a disk partition tool (such as MiniTool Partition Wizard Home Edition) create on SD card a Primary FAT32 partition, and set the partition ID type for the partition to 0x0C FAT32 LBA and set its Active flag. Once this is done, the partition should appear as a (read/write accessible) drive under Windows. If you are going to use this card for backing up your NT, keep in mind that each backup will require at least 600MB (for a barebone stock or CM config) and size the partition accordingly. dont' care of any backups...
Obtain and copy to the SD card the following files:
MLO, u-boot.bin, and flashing_boot.img in boot.zip obtained from http://goo.im/devs/succulent/acclaim i don't see any MLO and u-boot.bin are not in the list ????
either one of the two recovery program image files: cwm_6.0.2.8_acclaim_recovery_sdcard.img (ClockworkMod Recovery (aka CWM)), or twrp_2.4.3.0_acclaim_recovery_sdcard.img (TeamWin Recovery Project (aka TWRP)) from http://goo.im/devs/succulent/acclaim/recovery , rename it to recovery.img. If you want to try out (or use) both, name your alternate choice altboot.img. which one would u suggest to use?
the file cm_acclaim_10.1.0_29JUN2013_HD.zip from http://iamafanof.wordpress.com/2013/...k-tablet-0218/
the file gapps-jb-20130301-signed.zip from http://iamafanof.wordpress.com/2013/...k-tablet-0218/
i know, im a total dummy. sorry and thanks for helping!
WhiterabbitITA said:
hello
trying to root to cm10
using this thread
http://forum.xda-developers.com/showpost.php?p=43326042&postcount=123
have some question:
...
Obtain and copy to the SD card the following files:
MLO, u-boot.bin, and flashing_boot.img in boot.zip obtained from http://goo.im/devs/succulent/acclaim i don't see any MLO and u-boot.bin are not in the list ????
Click to expand...
Click to collapse
Those 3 files are inside the file boot.zip at http://goo.im/devs/succulent/acclaim/boot.zip.
either one of the two recovery program image files: cwm_6.0.2.8_acclaim_recovery_sdcard.img (ClockworkMod Recovery (aka CWM)), or twrp_2.4.3.0_acclaim_recovery_sdcard.img (TeamWin Recovery Project (aka TWRP)) from http://goo.im/devs/succulent/acclaim/recovery , rename it to recovery.img. If you want to try out (or use) both, name your alternate choice altboot.img. which one would u suggest to use?
Click to expand...
Click to collapse
I typically use CWM for flashing (but use TWRP for making backup).
If you really want a "for dummies": http://forum.xda-developers.com/showpost.php?p=43871774&postcount=2
ok i'm trying
WhiterabbitITA said:
another problem:
this rooting really makes me mad.
i have the sd card inserted in the computer. the minitool partition wizard says it has 1.8gb unlocated space
windows says i have only 70 mb.
why? why? why?
Click to expand...
Click to collapse
Because Windows only sees the boot partition. The boot partition is very small (2-300 MB?), and the 70 MB is the unused space in that partition (or possibly the whole partition. It's unclear from what you say.).
Minitool sees the whole card and allows you to assign more space to any partitions, or create new partitions (that WIndows won't see, but your NT will).
That's really not a rooting issue. Do you have a problem with the actual process? If so, what kind of problem?
asawi said:
Because Windows only sees the boot partition. The boot partition is very small (2-300 MB?), and the 70 MB is the unused space in that partition (or possibly the whole partition. It's unclear from what you say.).
Minitool sees the whole card and allows you to assign more space to any partitions, or create new partitions (that WIndows won't see, but your NT will).
That's really not a rooting issue. Do you have a problem with the actual process? If so, what kind of problem?
Click to expand...
Click to collapse
pressing hold and N button with the NT powered to a cable, nothing happens.
when i try to turn it on just with the power button it ask about factory reset
no boot menu, or i have first to restore factory settings first?
WhiterabbitITA said:
pressing hold and N button with the NT powered to a cable, nothing happens.
when i try to turn it on just with the power button it ask about factory reset
no boot menu, or i have first to restore factory settings first?
Click to expand...
Click to collapse
Do not hold the "n" while pressing power. First power and then relase power and press "n". Or just have it turend off and no USB cable connected, insert sd-card and insert USB cbale cnnected to charger.
asawi said:
If you really want a "for dummies": http://forum.xda-developers.com/showpost.php?p=43871774&postcount=2
Click to expand...
Click to collapse
i'm trying
1. Download, extract and burn this ready-made CM10 sd image to a 2 GB (?) (or larger - not 100% sure of the size since I use a larger card myself) sd card. Use this card as a bootable CWM card. Even if it's a complete run-able CM10 it also works as a bootable CWM! Very handy!
http://iamafanof.wordpress.com/2012/...r-nook-tablet/ t's a big download, but it's a more or less fool proof way of doing it! If I remember correctly there is actually room enough to put CM10 and GApps on the card. At least the one I use.
2. Boot into the recocvery of that card by pressing the "n" right after the power button and then hold the "n" to get to boot menu
3. In boot menu choose "sd recovery" ot something similar. This will take you to CWM
4. When in CWM install zips, wipe cache and Dalvik and you should be fine! it says there are no zip to install
WhiterabbitITA said:
i'm trying
1. Download, extract and burn this ready-made CM10 sd image to a 2 GB (?) (or larger - not 100% sure of the size since I use a larger card myself) sd card. Use this card as a bootable CWM card. Even if it's a complete run-able CM10 it also works as a bootable CWM! Very handy!
http://iamafanof.wordpress.com/2012/...r-nook-tablet/ t's a big download, but it's a more or less fool proof way of doing it! If I remember correctly there is actually room enough to put CM10 and GApps on the card. At least the one I use.
2. Boot into the recocvery of that card by pressing the "n" right after the power button and then hold the "n" to get to boot menu
3. In boot menu choose "sd recovery" ot something similar. This will take you to CWM
4. When in CWM install zips, wipe cache and Dalvik and you should be fine! it says there are no zip to install
Click to expand...
Click to collapse
Have you put any zips on the card you have inserted? You have to decide what ROM to install, download it and the approiate gApps for it and put on the sd card.
I'm sorry I linked to post where I didn't make that clear enough. I do say that there is enough room on the card for it and I also suggest a ROM to put there, But I guess a "for dummies" need to be clearer on that...
At the bottom of the quoted post
Edit: I checked, and there IS enough room for my favourite ROM and gApps on the boot section of the card. "My favourite" is the 1231 build on Iamafanof site. I have tried more recent ones, but I always go back to this one. Just my opinion of course! http://iamafanof.wordpress.com/2012/...let-uploading/
Click to expand...
Click to collapse
asawi said:
Have you put any zips on the card you have inserted? You have to decide what ROM to install, download it and the approiate gApps for it and put on the sd card.
I'm sorry I linked to post where I didn't make that clear.
Click to expand...
Click to collapse
thanks for your help asawi
i've burned the image i've downloaded from the link u've posted.
so i can't put nothing more on sd card.
or i need to use two sd card?
WhiterabbitITA said:
thanks for your help asawi
i've burned the image i've downloaded from the link u've posted.
so i can't put nothing more on sd card.
or i need to use two sd card?
Click to expand...
Click to collapse
When I make this card there is enough room for CM10 and gApps zips on it. There should be for you as well. If not, use another card. You can switch onec in CWM.
asawi said:
When I make this card there is enough room for CM10 and gApps zips on it. There should be for you as well. If not, use another card. You can switch onec in CWM.
Click to expand...
Click to collapse
am getting mad
starting again...
WhiterabbitITA said:
am getting mad
starting again...
Click to expand...
Click to collapse
How much free space does Windows show once you burned the card?
asawi said:
How much free space does Windows show once you burned the card?
Click to expand...
Click to collapse
back to these instructions:
http://forum.xda-developers.com/showpost.php?p=43326042&postcount=123
it seems it worked
let's cross the fingers
WhiterabbitITA said:
back to these instructions:
http://forum.xda-developers.com/showpost.php?p=43326042&postcount=123
it seems it worked
let's cross the fingers
Click to expand...
Click to collapse
asawi thanks a lot , it worked.
and there's a program colled gooim that says that there are updates available....