Please help me.. I already downloaded DXKPD file here, but I don't know to flash this base band. I'm familiar with flashing but this one it is different from other base band 'coz it's only have 1 file and not like other baseband that have 4 files (modem. etc). I tried to flash this baseband using cwm4 but the process is always aborted. Can anyone help me how to flash DXKPD? please. thanks
Use ODIN.
Tick "one package" and select the file instead of 4 files.
Rest of the steps are the same as 4 file flash.
katal2hod said:
Please help me.. I already downloaded DXKPD file here, but I don't know to flash this base band. I'm familiar with flashing but this one it is different from other base band 'coz it's only have 1 file and not like other baseband that have 4 files (modem. etc). I tried to flash this baseband using cwm4 but the process is always aborted. Can anyone help me how to flash DXKPD? please. thanks
Click to expand...
Click to collapse
its an one package file ..
tick the option " one package "
in down there will be option one package option
chose the file with extension mdf.tar which is found when u extract the KPD file .
after that put ur phone in downloading mode and connect to pc.
and last step, press "START"
................................................................................................................
EXAMPLE- ks2 is also an one package file...
see the screenshot u will understand everything .
Don't forget to press "thanks" button if helped u
...and don't forget to select cooper.ops in ops
thank you all for your help!! moderator..please close this thread
Related
Hi all,
I just downloaded this stock ROM from SamFirmware.com as it was a KG6 build and I wanted to give it a shot. When I went to unzip the ROM, it contained 5 files. I know which files go where in Odin when there are 4 files but this one has got me confused. The confusing part for me (being a noob) is the fact that there is a Kernel and a Code file...where do these 2 files go under? They both can't possibly be selected under the PDA section so is one a boot loader file??? I have taken a screencap of the zip file contents so that hopefully someone can explain where the 2 particular files go in Odin.
Thanks all.
How about following the instructions first .
Who told you to unzip it ???
Odin flash tar file via PDA .
STOCK ROMS
http://forum.xda-developers.com/showthread.php?t=1110160
jje
JJEgan said:
How about following the instructions first .
Who told you to unzip it ???
Odin flash tar file via PDA .
STOCK ROMS
http://forum.xda-developers.com/showthread.php?t=1110160
jje
Click to expand...
Click to collapse
Well he would need to unzip the archive if he wants to use the included tarballs to flash his device.
@OP: When you open Odin 1.85 just put the following in the slots as below:
PDA: Code_I9100XXKG6.......
Phone: Modem_I9100XXKG6.......
CSC: GT-I9100-CSC-MULTI-OXAKG6.....
Ignore the rest of the files. Don't need to use .pit file and make sure you don't tick repartition. I would encourage you to read up on using Odin first if you don't know what you're doing before attempting to flash.
Thanks Intratech..I am familiar with Odin as I have flashed my device successfully many times. Just never encountered both the Kernel and Code in the same zip so wasn't too sure whether I should use both or just one.
just curious but what is the actual difference between the two??
also, pit file is used to reset the path no?? as in wipe the lot except cutom binary hits??
cheers
col
Also wat happens when u do click repartition??? Done it by accident once phones fine??
Wat does pit stand for!?
Partition info tree? Lol who knows?
iphone killa
Hi guy,,,
i had un-successfull tries with odin. but Also had a successful one when flashing Vibrant with Stock 2.1. it was very simple indeed just downloaded .tar and .pit file, and flash , and thats it.
i want upgrade to 2.2 (latest version of 2.2 , maybe 2.2.1 or 2.2.2 not sure)
using Odin.
can any1 provide a straight link to download STOCK OFFICIAL FROYO .tar and .pit files ? to use wth Odin ??
Thx Guys
Ok , another quick Q: when i flashed 2.1, i downloaded .pit and .tar file.
now im downloading T959UVKA7 -that is 2.2 - from http://www.samfirmware.com/
but i donkt know how to find associated .pit ???
is any ROM MUST has a .pit file to flash ???
Latest one was kb5 and you can find odin version here.,,
http://forum.xda-developers.com/showthread.php?p=12913705
plz , i downloaded T959UVKA7.rar , do i need .pit file ??? and from where i get it ??
does every version of ROM have a distinct .pit file ?
tarreq said:
plz , i downloaded T959UVKA7.rar , do i need .pit file ??? and from where i get it ??
does every version of ROM have a distinct .pit file ?
Click to expand...
Click to collapse
can i find answer to this please ?
Answer is NO!!
Mapping can be done using the same 512 pit file.
Also you only need to repartition once which you already did when you Odin's to JFD Eclair
Therefore, you don't need to partition anymore.
Also UN-tick reboot on Odin, Otherwise you wont have control the first time in wiping critical stuff before you re-boot. You use the menu on the phone to wipe data/factory reset and then do the wipe the cache next, Then do a reboot otherwise you might end up with a boot loop.
Also why aren't you using Rom Manager, to flash ROM's instead of Odin?
Your going to find out here shortly that 99% of all ROM's are in a zipped file, and must be done using CWM recovery method.
thx for your reply , can u provide me wth a link for detailed guide for beginners to use Rom Manager from scratch ?
http://forum.xda-developers.com/showthread.php?t=732458
Got Root? YOU NEED A CUSTOM RECOVERY!
Big props to XDA user Koush for his amazing Rom Manager App. In short, this lets you create system backups for those "oops" moments. It also gives you a directory of ROMs for easy downloading and flashing. Yeah, it is that cool. Please see his post for instructions. After successfully installing, be sure a make a Nandroid Backup of your system before flashing any rom's (see below).
Installation instructions:
1.Download ROM Manager from the Market.
2.Flash Recovery.
3.Choose Vibrant as your phone.
4.Accept the Superuser prompt.
5.On the very FIRST boot of Clockwork, you may need to manually select "reinstall packages" if Clockwork does not start. You should only ever have to do this once. It will be automatic from then on.
6.Watch the backup go!
Thx Dear,
plz i need to confirm that setting before i dive into Ocean
- i open Odin 1.3 (leave Auto-reboot , F. reset time checked) by default
- will load 512.bit into PIT
- will load "T959UVKA7-REV05-home-low-CL865177.tar.md5" into PDA
- put phone into download mode , connect USB cable , and press Strat.
is this right ? any additional steps or files required ? (i hear about csc , modem files , etc , do i need such files ? or just everything is included in T959UVKA7 version i downloaded from samfirmware.com)
thx in advance..
Must... control... fist of... death...
Hey guys
Well im new to this page and i have a galaxy player 5.0. Im have succesfully rooted it but i have trouble flashing a custom recovery.
I have downloaded ROM manager but when it asks for my phone model im cant find it on the list. I have chosen Galaxy S 4G because i thought it was closer to this model.
Im sorry if there was a answer out there and didnt find it but i have some trouble finding stuff with the search function and cat understand some terms that are used by more experienced people
Sorry for my english its not my native language
Thanks in advance
You don't actually have to have ROM manager to flash stuff, bit you DO need a kernel with cwm. Get the one appropriate for your device (us or international). Then reboot into recovery (hold down power + up or use an app) and install your zip from there.
Hope that helps!
Sent from my YP-G70
Thanks, But where can i find a kernel for my device and now if its US or international, and what is it?
Mine is the international version
Just search this:
[KERNEL][CWM][OC&UV] rj's custom kernel for Galaxy Player 5.0 INTL (YP-G70) r14
Download the appropriate software (Odin, kies, drivers.) and follow the directions carefully.
Don't use rom manager.
Thanks. I downloaded the Kernel. It has 2 files in it. One is called zImage and the other one is a folder called META.INF
As i have understanded in the instructions i should open Odin3 and and select PDA and select a file but i dont know wich. and when i open and browse to the folder where the 2 files are on i just find the folder called META.INF
Help Me please!!!
Rimusa said:
Thanks. I downloaded the Kernel. It has 2 files in it. One is called zImage and the other one is a folder called META.INF
As i have understanded in the instructions i should open Odin3 and and select PDA and select a file but i dont know wich. and when i open and browse to the folder where the 2 files are on i just find the folder called META.INF
Help Me please!!!
Click to expand...
Click to collapse
You have to flash the zimage under pda
I dont understand. Could you give me a step by step on how to do this??
1.download rj kernel r2
2. Put your device in download mode(device turned off hold down button and plug in USB cable immediately) you should see an android with yellow triangle
3.open odin 3
4.under PDA Choose rj kernel r2(zimage)
5.Press start in Odin
6. You have now successfully flashed your first kernel
OK thanks i flashed the kernel already
Now how do i acces CWM while in recovery mode?
Also i have also installed Gingerbread After installing my kernel. Does this mean my kernel has been erased??
Thanks in advance
Oh, I thought you already had gingerbread installed.
Well on the US YP-G70 to access CWM, while the device is off, hold the volume UP button + power button. Let go of power button when you see the samsung logo. Try it.
IF CWM recovery comes up you should still have the kernel because CWM comes with the kernel.
goodluck
No, I have just installed gingerbread using the same method as trying to install a kernel but out of curiosity.
My device is now on gingerbread 2.3.6 it is unrooted and doesnt have the kernel installed
How can i root gingerbread? superoneclick doesnt work and i triede Z4root and gingerbreak
And does the latest rj kernel have CWM installed?
Thanks in advance
Rimusa said:
Hey guys
Well im new to this page and i have a galaxy player 5.0. Im have succesfully rooted it but i have trouble flashing a custom recovery.
I have downloaded ROM manager but when it asks for my phone model im cant find it on the list. I have chosen Galaxy S 4G because i thought it was closer to this model.
Im sorry if there was a answer out there and didnt find it but i have some trouble finding stuff with the search function and cat understand some terms that are used by more experienced people
Sorry for my english its not my native language
Thanks in advance
Click to expand...
Click to collapse
Do not flash a incorrect recovery, at best you will softbrick.
Most of the time- you loose your device.
Any way to root I9100XXLSJ_I9100OXXLS1_OXX.zip ???
quite a goot ROM though , but I m little upset with the battery drain so I'm trying to root then use battery calibiration
Download the ROM
hotfile.com/dl/179607505/5cd1648/I9100XXLSJ_I9100OXXLS1_OXX.zip.htm
Mirror
server1.android-rom.ir/firmware/samsung/I9100/I9100XXLSJ_I9100OXXLS1_OXX.zip
Click the PDA button and choose the file named 'CODE'.
Tap the Phone button and choose the file named 'MODEM'. Ignore this step if such file is missing.
Hit the CSC button and choose the file named 'CSC'. Ignore this step if such file is absent.
Click the PIT button and choose the .pit file. Ignore this step if there is no such file.
http://forum.xda-developers.com/showthread.php?t=1877270
just follow the instructions :good:
jhetskie said:
http://forum.xda-developers.com/showthread.php?t=1877270
just follow the instructions :good:
Click to expand...
Click to collapse
I followed the instructions and did what they told me
XXLSJ-OXX (Jellybean leak) was used .
nothing happened
Maybe you can provide me more details?
I forgot to say it was first m250s bi i turned it to i9100 4.0.4 then i found 4.1.2
Hello there alot of people have problem with network issue no network or selected network not available or registered on network but no network after searching and spend 5 hour i fix it this problem on my galaxy s3 i upgrade from 4.1.2 to 4.3 and no network. so i will let u know how to fix it
This is tested on galaxy s3 international i have flashed with latest 4.3 I9300XXUGMJ9 maybe work on 4.1.2 but not tested if someone test it let me know !!
Step by step guide please be patient and follow it steps
1. Download firmware from sammobile http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=0#firmware
2. Download ODIN from attachments below
3. First shut down your device, then power on by simultaneously pressing the power button, home button and volume down key. Now you will see download mode and you will be asked if you want to cancel or continue. Press volume up to continue or volume down to cancel and reboot.
4. After this click PDA and select firmware you download .tar.md5 and Start flash and wait till PASS if your phone autoreboot stuck after flash you must factory reset wipe data cache.
5. Root install CWM or PHILZ recovery with odin .tar file http://forum.xda-developers.com/showthread.php?t=2002953 or http://forum.xda-developers.com/showthread.php?t=1719744
6.Install 7zip on your pcc http://www.7-zip.org/download.html
7.Right click on firmware Open with or open with 7zip same firmware you flashed above .!! when dialog box opened click Select a program from a list of installed programs then click browse and go C:\Program Files (x86)\7-Zip 7zFM click you will get error There is no correct record at the end of archive dont panic click ok click on modem.bin and move to same folder with your firmware I9300xxxxxxx.tar.md5 ..! cuz u will get error patchin if you move it another folder.
8.Download modem patcher from zuluman in attachment below click patch and select modem.bin patcher will make backup use modem.bin not .bak
9. Download METAINF rar extract it copy and paste your patched modem.bin inside this folder select all 3 files right click and add to archive select archive format .ZIP not RAR after this copy the zip file you created and paste to root of your sdcard reboot into recovery PRESS AND HOLD VOLUME UP + Home Button + Power select zip flash and reboot device. now your phone should work network..
10. Remember the same firmware you flashed same modem you will need dont flash other modem
11. Comment and thanks if this worked for you .
If you have question i will help u as i can asap
bleros said:
Hello there alot of people have problem with network issue no network or selected network not available or registered on network but no network after searching and spend 5 hour i fix it this problem on my galaxy s3 i upgrade from 4.1.2 to 4.3 and no network. so i will let u know how to fix it
This is tested on galaxy s3 international i have flashed with latest 4.3 I9300XXUGMJ9 maybe work on 4.1.2 but not tested if someone test it let me know !!
Step by step guide please be patient and follow it steps
1. Download firmware from sammobile http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=0#firmware
2. Download ODIN from attachments below
3. First shut down your device, then power on by simultaneously pressing the power button, home button and volume down key. Now you will see download mode and you will be asked if you want to cancel or continue. Press volume up to continue or volume down to cancel and reboot.
4. After this click PDA and select firmware you download .tar.md5 and Start flash and wait till PASS if your phone autoreboot stuck after flash you must factory reset wipe data cache.
5. Root install CWM or PHILZ recovery with odin .tar file http://forum.xda-developers.com/showthread.php?t=2002953 or http://forum.xda-developers.com/showthread.php?t=1719744
6.Install 7zip on your pcc http://www.7-zip.org/download.html
7.Right click on firmware Open with or open with 7zip same firmware you flashed above .!! when dialog box opened click Select a program from a list of installed programs then click browse and go C:\Program Files (x86)\7-Zip 7zFM click you will get error There is no correct record at the end of archive dont panic click ok click on modem.bin and move to same folder with your firmware I9300xxxxxxx.tar.md5 ..! cuz u will get error patchin if you move it another folder.
8.Download modem patcher from zuluman in attachment below click patch and select modem.bin patcher will make backup use modem.bin not .bak
9. Download METAINF rar extract it copy and paste your patched modem.bin inside this folder select all 3 files right click and add to archive select archive format .ZIP not RAR after this copy the zip file you created and paste to root of your sdcard reboot into recovery PRESS AND HOLD VOLUME UP + Home Button + Power select zip flash and reboot device. now your phone should work network..
10. Remember the same firmware you flashed same modem you will need dont flash other modem
11. Comment and thanks if this worked for you .
If you have question i will help u as i can asap
Click to expand...
Click to collapse
worked for me, thanks
no luck
bleros said:
Hello there alot of people have problem with network issue no network or selected network not available or registered on network but no network after searching and spend 5 hour i fix it this problem on my galaxy s3 i upgrade from 4.1.2 to 4.3 and no network. so i will let u know how to fix it
This is tested on galaxy s3 international i have flashed with latest 4.3 I9300XXUGMJ9 maybe work on 4.1.2 but not tested if someone test it let me know !!
Step by step guide please be patient and follow it steps
1. Download firmware from sammobile http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=0#firmware
2. Download ODIN from attachments below
3. First shut down your device, then power on by simultaneously pressing the power button, home button and volume down key. Now you will see download mode and you will be asked if you want to cancel or continue. Press volume up to continue or volume down to cancel and reboot.
4. After this click PDA and select firmware you download .tar.md5 and Start flash and wait till PASS if your phone autoreboot stuck after flash you must factory reset wipe data cache.
5. Root install CWM or PHILZ recovery with odin .tar file http://forum.xda-developers.com/showthread.php?t=2002953 or http://forum.xda-developers.com/showthread.php?t=1719744
6.Install 7zip on your pcc http://www.7-zip.org/download.html
7.Right click on firmware Open with or open with 7zip same firmware you flashed above .!! when dialog box opened click Select a program from a list of installed programs then click browse and go C:\Program Files (x86)\7-Zip 7zFM click you will get error There is no correct record at the end of archive dont panic click ok click on modem.bin and move to same folder with your firmware I9300xxxxxxx.tar.md5 ..! cuz u will get error patchin if you move it another folder.
8.Download modem patcher from zuluman in attachment below click patch and select modem.bin patcher will make backup use modem.bin not .bak
9. Download METAINF rar extract it copy and paste your patched modem.bin inside this folder select all 3 files right click and add to archive select archive format .ZIP not RAR after this copy the zip file you created and paste to root of your sdcard reboot into recovery PRESS AND HOLD VOLUME UP + Home Button + Power select zip flash and reboot device. now your phone should work network..
10. Remember the same firmware you flashed same modem you will need dont flash other modem
11. Comment and thanks if this worked for you .
If you have question i will help u as i can asap
Click to expand...
Click to collapse
Did it and lost my IMEI and other info, reflash the stock rom and get them back but no network yet =(
Got a Little confused at point 8 and 9,..
8.- Select modem.bin is the same archive that previously extracted with 7zip... but zulaman modify it? or there was suposed to apear a new file beside de one with .bak that am supose to leave there?
9.- 3 files... you mean 2 files and a directory?
I did it that way :/
bleros said:
Hello there alot of people have problem with network issue no network or selected network not available or registered on network but no network after searching and spend 5 hour i fix it this problem on my galaxy s3 i upgrade from 4.1.2 to 4.3 and no network. so i will let u know how to fix it
This is tested on galaxy s3 international i have flashed with latest 4.3 I9300XXUGMJ9 maybe work on 4.1.2 but not tested if someone test it let me know !!
Step by step guide please be patient and follow it steps
1. Download firmware from sammobile http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=0#firmware
2. Download ODIN from attachments below
3. First shut down your device, then power on by simultaneously pressing the power button, home button and volume down key. Now you will see download mode and you will be asked if you want to cancel or continue. Press volume up to continue or volume down to cancel and reboot.
4. After this click PDA and select firmware you download .tar.md5 and Start flash and wait till PASS if your phone autoreboot stuck after flash you must factory reset wipe data cache.
5. Root install CWM or PHILZ recovery with odin .tar file http://forum.xda-developers.com/showthread.php?t=2002953 or http://forum.xda-developers.com/showthread.php?t=1719744
6.Install 7zip on your pcc http://www.7-zip.org/download.html
7.Right click on firmware Open with or open with 7zip same firmware you flashed above .!! when dialog box opened click Select a program from a list of installed programs then click browse and go C:\Program Files (x86)\7-Zip 7zFM click you will get error There is no correct record at the end of archive dont panic click ok click on modem.bin and move to same folder with your firmware I9300xxxxxxx.tar.md5 ..! cuz u will get error patchin if you move it another folder.
8.Download modem patcher from zuluman in attachment below click patch and select modem.bin patcher will make backup use modem.bin not .bak
9. Download METAINF rar extract it copy and paste your patched modem.bin inside this folder select all 3 files right click and add to archive select archive format .ZIP not RAR after this copy the zip file you created and paste to root of your sdcard reboot into recovery PRESS AND HOLD VOLUME UP + Home Button + Power select zip flash and reboot device. now your phone should work network..
10. Remember the same firmware you flashed same modem you will need dont flash other modem
11. Comment and thanks if this worked for you .
If you have question i will help u as i can asap
Click to expand...
Click to collapse
i have a problem with my GS3 i9300 ... when i update to 4.3 my imei reads like that 00041xxxxx0000 ... is that will work with me ??? or what should i do
K.mngawy said:
i have a problem with my GS3 i9300 ... when i update to 4.3 my imei reads like that 00041xxxxx0000 ... is that will work with me ??? or what should i do
Click to expand...
Click to collapse
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743
Network IMEI EFS
http://forum.xda-developers.com/showthread.php?t=2393289
Downgrade and network problems .
http://forum.xda-developers.com/showthread.php?t=2531221
JJEgan said:
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743
Network IMEI EFS
http://forum.xda-developers.com/showthread.php?t=2393289
Downgrade and network problems .
http://forum.xda-developers.com/showthread.php?t=2531221
Click to expand...
Click to collapse
believe meeee nothing of those works with meeeeee the same problem .. when i restore my imei on 4.3 i get unknown basebend and unknown imei !!! ... i had to downgrade to 4.1.2 to get my imei back !!
bleros said:
Hello there alot of people have problem with network issue no network or selected network not available or registered on network but no network after searching and spend 5 hour i fix it this problem on my galaxy s3 i upgrade from 4.1.2 to 4.3 and no network. so i will let u know how to fix it
This is tested on galaxy s3 international i have flashed with latest 4.3 I9300XXUGMJ9 maybe work on 4.1.2 but not tested if someone test it let me know !!
Step by step guide please be patient and follow it steps
1. Download firmware from sammobile http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=0#firmware
2. Download ODIN from attachments below
3. First shut down your device, then power on by simultaneously pressing the power button, home button and volume down key. Now you will see download mode and you will be asked if you want to cancel or continue. Press volume up to continue or volume down to cancel and reboot.
4. After this click PDA and select firmware you download .tar.md5 and Start flash and wait till PASS if your phone autoreboot stuck after flash you must factory reset wipe data cache.
5. Root install CWM or PHILZ recovery with odin .tar file http://forum.xda-developers.com/showthread.php?t=2002953 or http://forum.xda-developers.com/showthread.php?t=1719744
6.Install 7zip on your pcc http://www.7-zip.org/download.html
7.Right click on firmware Open with or open with 7zip same firmware you flashed above .!! when dialog box opened click Select a program from a list of installed programs then click browse and go C:\Program Files (x86)\7-Zip 7zFM click you will get error There is no correct record at the end of archive dont panic click ok click on modem.bin and move to same folder with your firmware I9300xxxxxxx.tar.md5 ..! cuz u will get error patchin if you move it another folder.
8.Download modem patcher from zuluman in attachment below click patch and select modem.bin patcher will make backup use modem.bin not .bak
9. Download METAINF rar extract it copy and paste your patched modem.bin inside this folder select all 3 files right click and add to archive select archive format .ZIP not RAR after this copy the zip file you created and paste to root of your sdcard reboot into recovery PRESS AND HOLD VOLUME UP + Home Button + Power select zip flash and reboot device. now your phone should work network..
10. Remember the same firmware you flashed same modem you will need dont flash other modem
11. Comment and thanks if this worked for you .
If you have question i will help u as i can asap
Click to expand...
Click to collapse
Hi, thank you for this. But I am having a problem...
I am unable to create a flashable METAINF.zip using 7zip. I tried to flash it using CWM and Philz with installation aborted message both times. That was with 4.3 firmware. So I then tried to repeat the process with the 4.1.2 firmware with the same results. Am I missing something on making the zip flashable?
Thanks,
Kes
Edit
Scrap that. My zip is now flashable. Was compressing the entire folder, not just the three files within it. 4.3 didn't work though. Off to have a go at 4.1.2 instead.....
---------- Post added at 09:27 AM ---------- Previous post was at 08:55 AM ----------
Nope, still no network. But instead of saying emergency calls only, it says no service. Manually searching for a network shows a pop up saying no sim
It is proper forum etiquette to only quote a prior post when necessary and then only the pertinent portion of the post. Above is a good example of a 10-page thread from only 1-2 pages of content. Please do your fellow forum members a favor and try to adopt this approach.
Thank you Scott586 for pointing out my drastic error which I can only profoundly apologise for. But may I, ever so gently, point out that I am a very new member and am not yet familiar with the buttons. The forums I usually frequent have a "quote" button which quotes the post you wish to reply to. This forum simply states "reply", a button I am accustomed to using when replying/responding/posting on a thread.
A forum etiquette that I am familiar with though is not to give newbies a hard time while they learn the new layout. Maybe that is one which could also be implemented here?
Oh, and back on topic, 4.1.2 didn't work either. Back to the drawing board for me
for my phone, that's not work. I'm on 4.1.2 (XEF-I9300XXEMG4) and when i follow your process, network is over, WiFi too! IMEI/Baseband are blank.
Maybe i make a mistake but i don't think. Thank you.
bleros said:
Hello there alot of people have problem with network issue no network or selected network not available or registered on network but no network after searching and spend 5 hour i fix it this problem on my galaxy s3 i upgrade from 4.1.2 to 4.3 and no network. so i will let u know how to fix it
Click to expand...
Click to collapse
Yesterday I've spent like 10 hours reading through posts and trying different solutions to fix "not registered to network" issue after upgrading my i9300 to android 4.3 in the end, I've found this post and it worked like a charm.
Excellent step by step explanation, all the vital information and links to the tools needed to complete the procedure,.
I can only say, thanks a lot man. :good:
my dear frient
thank you for sharing the valuable idea
unfortunately i cant follow u from step 5 please
Root install CWM or PHILZ recovery with odin .tar file ....? please attach with video instruction if possible waiting for u r reply as soon as possible
This method sounds quite promising but looks like it's for stock ROM only...I've lost my network, but I have a custom rom installed (Archidroid 1.7.12). Network was working on stock 4.1.2 with ariza patch. Any experience with that or have any idea how your method would be applied to my situation? Thanks!
PBLnS said:
Did it and lost my IMEI and other info, reflash the stock rom and get them back but no network yet =(
Got a Little confused at point 8 and 9,..
8.- Select modem.bin is the same archive that previously extracted with 7zip... but zulaman modify it? or there was suposed to apear a new file beside de one with .bak that am supose to leave there?
9.- 3 files... you mean 2 files and a directory?
I did it that way :/
Click to expand...
Click to collapse
I am having problems with copying files to the metainf directory as well. if any one can specify where exactly to copy the modem.bin? Its quite unclear and I am unable to flash the zip archive, ends up with an error. Please help!!
need fix for this in s5 g900f
i need fix for my s5.
my imei is the same with what is printed in the back of my fone.
wifi is working.
itried flashing the original firmware, nothing was fix. done recovery mode. factory reset wipe cache. itried inserting the simcard to other fone it has signaL and can make caLLs. tried tried inserting other simcard it works in my s5. i dont know what is wrong why it cant register on the network my simcard on my s5. please i need fix asap. i think the efs or something.
i want to know how to flash the modem in s5 and where to downLoad the modem. maybe this wiLL fix the probLem.