[SOLVED] Upgrade to 4.3 No network fixed - Galaxy S III Q&A, Help & Troubleshooting

Hello there alot of people have problem with network issue no network or selected network not available or registered on network but no network after searching and spend 5 hour i fix it this problem on my galaxy s3 i upgrade from 4.1.2 to 4.3 and no network. so i will let u know how to fix it
This is tested on galaxy s3 international i have flashed with latest 4.3 I9300XXUGMJ9 maybe work on 4.1.2 but not tested if someone test it let me know !!
Step by step guide please be patient and follow it steps
1. Download firmware from sammobile http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=0#firmware
2. Download ODIN from attachments below
3. First shut down your device, then power on by simultaneously pressing the power button, home button and volume down key. Now you will see download mode and you will be asked if you want to cancel or continue. Press volume up to continue or volume down to cancel and reboot.
4. After this click PDA and select firmware you download .tar.md5 and Start flash and wait till PASS if your phone autoreboot stuck after flash you must factory reset wipe data cache.
5. Root install CWM or PHILZ recovery with odin .tar file http://forum.xda-developers.com/showthread.php?t=2002953 or http://forum.xda-developers.com/showthread.php?t=1719744
6.Install 7zip on your pcc http://www.7-zip.org/download.html
7.Right click on firmware Open with or open with 7zip same firmware you flashed above .!! when dialog box opened click Select a program from a list of installed programs then click browse and go C:\Program Files (x86)\7-Zip 7zFM click you will get error There is no correct record at the end of archive dont panic click ok click on modem.bin and move to same folder with your firmware I9300xxxxxxx.tar.md5 ..! cuz u will get error patchin if you move it another folder.
8.Download modem patcher from zuluman in attachment below click patch and select modem.bin patcher will make backup use modem.bin not .bak
9. Download METAINF rar extract it copy and paste your patched modem.bin inside this folder select all 3 files right click and add to archive select archive format .ZIP not RAR after this copy the zip file you created and paste to root of your sdcard reboot into recovery PRESS AND HOLD VOLUME UP + Home Button + Power select zip flash and reboot device. now your phone should work network..
10. Remember the same firmware you flashed same modem you will need dont flash other modem
11. Comment and thanks if this worked for you .
If you have question i will help u as i can asap

bleros said:
Hello there alot of people have problem with network issue no network or selected network not available or registered on network but no network after searching and spend 5 hour i fix it this problem on my galaxy s3 i upgrade from 4.1.2 to 4.3 and no network. so i will let u know how to fix it
This is tested on galaxy s3 international i have flashed with latest 4.3 I9300XXUGMJ9 maybe work on 4.1.2 but not tested if someone test it let me know !!
Step by step guide please be patient and follow it steps
1. Download firmware from sammobile http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=0#firmware
2. Download ODIN from attachments below
3. First shut down your device, then power on by simultaneously pressing the power button, home button and volume down key. Now you will see download mode and you will be asked if you want to cancel or continue. Press volume up to continue or volume down to cancel and reboot.
4. After this click PDA and select firmware you download .tar.md5 and Start flash and wait till PASS if your phone autoreboot stuck after flash you must factory reset wipe data cache.
5. Root install CWM or PHILZ recovery with odin .tar file http://forum.xda-developers.com/showthread.php?t=2002953 or http://forum.xda-developers.com/showthread.php?t=1719744
6.Install 7zip on your pcc http://www.7-zip.org/download.html
7.Right click on firmware Open with or open with 7zip same firmware you flashed above .!! when dialog box opened click Select a program from a list of installed programs then click browse and go C:\Program Files (x86)\7-Zip 7zFM click you will get error There is no correct record at the end of archive dont panic click ok click on modem.bin and move to same folder with your firmware I9300xxxxxxx.tar.md5 ..! cuz u will get error patchin if you move it another folder.
8.Download modem patcher from zuluman in attachment below click patch and select modem.bin patcher will make backup use modem.bin not .bak
9. Download METAINF rar extract it copy and paste your patched modem.bin inside this folder select all 3 files right click and add to archive select archive format .ZIP not RAR after this copy the zip file you created and paste to root of your sdcard reboot into recovery PRESS AND HOLD VOLUME UP + Home Button + Power select zip flash and reboot device. now your phone should work network..
10. Remember the same firmware you flashed same modem you will need dont flash other modem
11. Comment and thanks if this worked for you .
If you have question i will help u as i can asap
Click to expand...
Click to collapse
worked for me, thanks

no luck
bleros said:
Hello there alot of people have problem with network issue no network or selected network not available or registered on network but no network after searching and spend 5 hour i fix it this problem on my galaxy s3 i upgrade from 4.1.2 to 4.3 and no network. so i will let u know how to fix it
This is tested on galaxy s3 international i have flashed with latest 4.3 I9300XXUGMJ9 maybe work on 4.1.2 but not tested if someone test it let me know !!
Step by step guide please be patient and follow it steps
1. Download firmware from sammobile http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=0#firmware
2. Download ODIN from attachments below
3. First shut down your device, then power on by simultaneously pressing the power button, home button and volume down key. Now you will see download mode and you will be asked if you want to cancel or continue. Press volume up to continue or volume down to cancel and reboot.
4. After this click PDA and select firmware you download .tar.md5 and Start flash and wait till PASS if your phone autoreboot stuck after flash you must factory reset wipe data cache.
5. Root install CWM or PHILZ recovery with odin .tar file http://forum.xda-developers.com/showthread.php?t=2002953 or http://forum.xda-developers.com/showthread.php?t=1719744
6.Install 7zip on your pcc http://www.7-zip.org/download.html
7.Right click on firmware Open with or open with 7zip same firmware you flashed above .!! when dialog box opened click Select a program from a list of installed programs then click browse and go C:\Program Files (x86)\7-Zip 7zFM click you will get error There is no correct record at the end of archive dont panic click ok click on modem.bin and move to same folder with your firmware I9300xxxxxxx.tar.md5 ..! cuz u will get error patchin if you move it another folder.
8.Download modem patcher from zuluman in attachment below click patch and select modem.bin patcher will make backup use modem.bin not .bak
9. Download METAINF rar extract it copy and paste your patched modem.bin inside this folder select all 3 files right click and add to archive select archive format .ZIP not RAR after this copy the zip file you created and paste to root of your sdcard reboot into recovery PRESS AND HOLD VOLUME UP + Home Button + Power select zip flash and reboot device. now your phone should work network..
10. Remember the same firmware you flashed same modem you will need dont flash other modem
11. Comment and thanks if this worked for you .
If you have question i will help u as i can asap
Click to expand...
Click to collapse
Did it and lost my IMEI and other info, reflash the stock rom and get them back but no network yet =(
Got a Little confused at point 8 and 9,..
8.- Select modem.bin is the same archive that previously extracted with 7zip... but zulaman modify it? or there was suposed to apear a new file beside de one with .bak that am supose to leave there?
9.- 3 files... you mean 2 files and a directory?
I did it that way :/

bleros said:
Hello there alot of people have problem with network issue no network or selected network not available or registered on network but no network after searching and spend 5 hour i fix it this problem on my galaxy s3 i upgrade from 4.1.2 to 4.3 and no network. so i will let u know how to fix it
This is tested on galaxy s3 international i have flashed with latest 4.3 I9300XXUGMJ9 maybe work on 4.1.2 but not tested if someone test it let me know !!
Step by step guide please be patient and follow it steps
1. Download firmware from sammobile http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=0#firmware
2. Download ODIN from attachments below
3. First shut down your device, then power on by simultaneously pressing the power button, home button and volume down key. Now you will see download mode and you will be asked if you want to cancel or continue. Press volume up to continue or volume down to cancel and reboot.
4. After this click PDA and select firmware you download .tar.md5 and Start flash and wait till PASS if your phone autoreboot stuck after flash you must factory reset wipe data cache.
5. Root install CWM or PHILZ recovery with odin .tar file http://forum.xda-developers.com/showthread.php?t=2002953 or http://forum.xda-developers.com/showthread.php?t=1719744
6.Install 7zip on your pcc http://www.7-zip.org/download.html
7.Right click on firmware Open with or open with 7zip same firmware you flashed above .!! when dialog box opened click Select a program from a list of installed programs then click browse and go C:\Program Files (x86)\7-Zip 7zFM click you will get error There is no correct record at the end of archive dont panic click ok click on modem.bin and move to same folder with your firmware I9300xxxxxxx.tar.md5 ..! cuz u will get error patchin if you move it another folder.
8.Download modem patcher from zuluman in attachment below click patch and select modem.bin patcher will make backup use modem.bin not .bak
9. Download METAINF rar extract it copy and paste your patched modem.bin inside this folder select all 3 files right click and add to archive select archive format .ZIP not RAR after this copy the zip file you created and paste to root of your sdcard reboot into recovery PRESS AND HOLD VOLUME UP + Home Button + Power select zip flash and reboot device. now your phone should work network..
10. Remember the same firmware you flashed same modem you will need dont flash other modem
11. Comment and thanks if this worked for you .
If you have question i will help u as i can asap
Click to expand...
Click to collapse
i have a problem with my GS3 i9300 ... when i update to 4.3 my imei reads like that 00041xxxxx0000 ... is that will work with me ??? or what should i do

K.mngawy said:
i have a problem with my GS3 i9300 ... when i update to 4.3 my imei reads like that 00041xxxxx0000 ... is that will work with me ??? or what should i do
Click to expand...
Click to collapse
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743
Network IMEI EFS
http://forum.xda-developers.com/showthread.php?t=2393289
Downgrade and network problems .
http://forum.xda-developers.com/showthread.php?t=2531221

JJEgan said:
STICKYS
http://forum.xda-developers.com/showthread.php?t=2344125
UNDERSTAND FIRST
http://forum.xda-developers.com/showthread.php?t=2362743
Network IMEI EFS
http://forum.xda-developers.com/showthread.php?t=2393289
Downgrade and network problems .
http://forum.xda-developers.com/showthread.php?t=2531221
Click to expand...
Click to collapse
believe meeee nothing of those works with meeeeee the same problem .. when i restore my imei on 4.3 i get unknown basebend and unknown imei !!! ... i had to downgrade to 4.1.2 to get my imei back !!

bleros said:
Hello there alot of people have problem with network issue no network or selected network not available or registered on network but no network after searching and spend 5 hour i fix it this problem on my galaxy s3 i upgrade from 4.1.2 to 4.3 and no network. so i will let u know how to fix it
This is tested on galaxy s3 international i have flashed with latest 4.3 I9300XXUGMJ9 maybe work on 4.1.2 but not tested if someone test it let me know !!
Step by step guide please be patient and follow it steps
1. Download firmware from sammobile http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=0#firmware
2. Download ODIN from attachments below
3. First shut down your device, then power on by simultaneously pressing the power button, home button and volume down key. Now you will see download mode and you will be asked if you want to cancel or continue. Press volume up to continue or volume down to cancel and reboot.
4. After this click PDA and select firmware you download .tar.md5 and Start flash and wait till PASS if your phone autoreboot stuck after flash you must factory reset wipe data cache.
5. Root install CWM or PHILZ recovery with odin .tar file http://forum.xda-developers.com/showthread.php?t=2002953 or http://forum.xda-developers.com/showthread.php?t=1719744
6.Install 7zip on your pcc http://www.7-zip.org/download.html
7.Right click on firmware Open with or open with 7zip same firmware you flashed above .!! when dialog box opened click Select a program from a list of installed programs then click browse and go C:\Program Files (x86)\7-Zip 7zFM click you will get error There is no correct record at the end of archive dont panic click ok click on modem.bin and move to same folder with your firmware I9300xxxxxxx.tar.md5 ..! cuz u will get error patchin if you move it another folder.
8.Download modem patcher from zuluman in attachment below click patch and select modem.bin patcher will make backup use modem.bin not .bak
9. Download METAINF rar extract it copy and paste your patched modem.bin inside this folder select all 3 files right click and add to archive select archive format .ZIP not RAR after this copy the zip file you created and paste to root of your sdcard reboot into recovery PRESS AND HOLD VOLUME UP + Home Button + Power select zip flash and reboot device. now your phone should work network..
10. Remember the same firmware you flashed same modem you will need dont flash other modem
11. Comment and thanks if this worked for you .
If you have question i will help u as i can asap
Click to expand...
Click to collapse
Hi, thank you for this. But I am having a problem...
I am unable to create a flashable METAINF.zip using 7zip. I tried to flash it using CWM and Philz with installation aborted message both times. That was with 4.3 firmware. So I then tried to repeat the process with the 4.1.2 firmware with the same results. Am I missing something on making the zip flashable?
Thanks,
Kes
Edit
Scrap that. My zip is now flashable. Was compressing the entire folder, not just the three files within it. 4.3 didn't work though. Off to have a go at 4.1.2 instead.....
---------- Post added at 09:27 AM ---------- Previous post was at 08:55 AM ----------
Nope, still no network. But instead of saying emergency calls only, it says no service. Manually searching for a network shows a pop up saying no sim

It is proper forum etiquette to only quote a prior post when necessary and then only the pertinent portion of the post. Above is a good example of a 10-page thread from only 1-2 pages of content. Please do your fellow forum members a favor and try to adopt this approach.

Thank you Scott586 for pointing out my drastic error which I can only profoundly apologise for. But may I, ever so gently, point out that I am a very new member and am not yet familiar with the buttons. The forums I usually frequent have a "quote" button which quotes the post you wish to reply to. This forum simply states "reply", a button I am accustomed to using when replying/responding/posting on a thread.
A forum etiquette that I am familiar with though is not to give newbies a hard time while they learn the new layout. Maybe that is one which could also be implemented here?
Oh, and back on topic, 4.1.2 didn't work either. Back to the drawing board for me

for my phone, that's not work. I'm on 4.1.2 (XEF-I9300XXEMG4) and when i follow your process, network is over, WiFi too! IMEI/Baseband are blank.
Maybe i make a mistake but i don't think. Thank you.

bleros said:
Hello there alot of people have problem with network issue no network or selected network not available or registered on network but no network after searching and spend 5 hour i fix it this problem on my galaxy s3 i upgrade from 4.1.2 to 4.3 and no network. so i will let u know how to fix it
Click to expand...
Click to collapse
Yesterday I've spent like 10 hours reading through posts and trying different solutions to fix "not registered to network" issue after upgrading my i9300 to android 4.3 in the end, I've found this post and it worked like a charm.
Excellent step by step explanation, all the vital information and links to the tools needed to complete the procedure,.
I can only say, thanks a lot man. :good:

my dear frient
thank you for sharing the valuable idea
unfortunately i cant follow u from step 5 please
Root install CWM or PHILZ recovery with odin .tar file ....? please attach with video instruction if possible waiting for u r reply as soon as possible

This method sounds quite promising but looks like it's for stock ROM only...I've lost my network, but I have a custom rom installed (Archidroid 1.7.12). Network was working on stock 4.1.2 with ariza patch. Any experience with that or have any idea how your method would be applied to my situation? Thanks!

PBLnS said:
Did it and lost my IMEI and other info, reflash the stock rom and get them back but no network yet =(
Got a Little confused at point 8 and 9,..
8.- Select modem.bin is the same archive that previously extracted with 7zip... but zulaman modify it? or there was suposed to apear a new file beside de one with .bak that am supose to leave there?
9.- 3 files... you mean 2 files and a directory?
I did it that way :/
Click to expand...
Click to collapse
I am having problems with copying files to the metainf directory as well. if any one can specify where exactly to copy the modem.bin? Its quite unclear and I am unable to flash the zip archive, ends up with an error. Please help!!

need fix for this in s5 g900f
i need fix for my s5.
my imei is the same with what is printed in the back of my fone.
wifi is working.
itried flashing the original firmware, nothing was fix. done recovery mode. factory reset wipe cache. itried inserting the simcard to other fone it has signaL and can make caLLs. tried tried inserting other simcard it works in my s5. i dont know what is wrong why it cant register on the network my simcard on my s5. please i need fix asap. i think the efs or something.
i want to know how to flash the modem in s5 and where to downLoad the modem. maybe this wiLL fix the probLem.

Related

[Q] Unable to detect .tar file ?

Hi,
I am trying to update my samsung galaxy s2 with latest firmware available for india (XWKF3)
Firmware info
PDA:XWKF3
PHONE: XXKE7
CSC:KCLKF1
Build date: 09/06/2011
So this is what i did.
1 Downloaded odin3 v1.85
2 Downloaded GT-I9100_INU_I9100XWKF3_I9100DDKE4_I9100ODDKF3
3 Downloaded CSC_INU_I9100ODDKE2
My problem is odin is unable to find PDA - .tar file.
Am i missing something ? Please advice...
One do the instructions tell you to unzip the file GT-I9100_INU_I9100XWKF3_I9100DDKE4_I9100ODDKF3
Or do they tell you to put it directly as a tar file to ODIN pda as per all the instructions .Or are they different instructions to that .
jje
JJEgan said:
One do the instructions tell you to unzip the file GT-I9100_INU_I9100XWKF3_I9100DDKE4_I9100ODDKF3
Or do they tell you to put it directly as a tar file to ODIN pda as per all the instructions .Or are they different instructions to that .
jje
Click to expand...
Click to collapse
Not sure. I followed the following instructions. If I am wrong can u correct me please... Thanks
Flashing Firmware with Odin
1. Just download the firmware version you want from above and extract the .tar file in the archive and save it somewhere
2. Reboot your phone to download mode.
To get download mode shut down the device. After it shuts off completely simultaneously press the Down volume key+ Home button + press the power button .
You should see a warning asking you to press volume up if you want to continue or volume down to cancel, press volume up. You are now in download mode!
3. Start Odin
4. Click on the PDA button and browse to the .tar file that you extracted in step 1
If the package has more than one .tar archive then they will be labelled with PDA, Phone/Modem and CSC. Just put them in the corresponding section of Odin
5. DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION.
Extract tar file means you should have a full tar file in tar format .
A try the full file you downloaded .
B that fails unzip the original file to a tar file do not then unzip the tar file .
jje
Don't unzip the tar file. The file browser is expecting to find something of that file type.
Your post shows you have unzipped the tar file .
jje
Thanks. I still have few more questions.
1 Will the Phone field be blank without any file ?
2 Can include indian csc file CSC_INU_I9100ODDKE2 aswell or is that not required ?
reborn4u said:
Thanks. I still have few more questions.
1 Will the Phone field be blank without any file ?
2 Can include indian csc file CSC_INU_I9100ODDKE2 aswell or is that not required ?
Click to expand...
Click to collapse
Please Help....
reborn4u said:
Thanks. I still have few more questions.
1 Will the Phone field be blank without any file ?
Yes as per instructions .
2 Can include indian csc file CSC_INU_I9100ODDKE2 aswell or is that not required
If you want yes .
jje
Click to expand...
Click to collapse
same problem with me.. there's only 1 tar file tried it as pdf phone got bricked than flashed to other fw.. :S

[Q] How to flash stock ROM?

I want to unroot my tab, so i downloaded the stock ROm from samfirmwares. I got a *.tar with 8 files. (See Attachment)
My question: How can I flash the Firmware? I tried Odin but I dont understand how it works. Or can I make a zip and flash through CWM?
mp. said:
I want to unroot my tab, so i downloaded the stock ROm from samfirmwares. I got a *.tar with 8 files. (See Attachment)
My question: How can I flash the Firmware? I tried Odin but I dont understand how it works. Or can I make a zip and flash through CWM?
Click to expand...
Click to collapse
it took all my yesterday but i guess i figured it out.. find odinv3 1.85, this is the one which sees the tab correctly, then keep your files unextracted from the *.tar format.. its icon should look like a rar file but the extension must be .TAR .. then by pressing the power+volume down buttons go into the black screen which asks you between download mode and recovery mode, by using the vol down button navigate to the download mode and with the vol up key select it.. then connect it to the computer, once Odin sees it click on the PDA and navigate to your tar file and then click on flash.. in 3 mins it will say PASS on the small box.. then when your tab is on this time go into recovery mode and wipe everything.. so it will be completely stock and just like when it is out of the box..
mp. said:
I want to unroot my tab, so i downloaded the stock ROm from samfirmwares. I got a *.tar with 8 files. (See Attachment)
My question: How can I flash the Firmware? I tried Odin but I dont understand how it works. Or can I make a zip and flash through CWM?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1171089
yqed said:
http://forum.xda-developers.com/showthread.php?t=1171089
Click to expand...
Click to collapse
I've read it, but the guide is not answered my question.
@_delice_doluca_: thx, i tried it and it works for me.

[Q] How to flash new zip in CWM?

I want to go back to stock rom. So I downloaded a zip file of the firmware.
Please give me the detailed steps to flash the rom without bricking it. My externel sdcard is unable to mount in CWM.
Any kind of help will be much appreciated.
thank you.
First download and install odin from here:
http://forum.xda-developers.com/showthread.php?t=1738841
1. If it is in zip extract it using 7zip,winrar.....
2. Open Odin3 (Run As Administrator).
3.Shut down your phone than put your device in download mode. To do so, press Vol-Down And Home And Power Button all together and when it vibrates release Power (It might not work in first time,so try it three four time before posting again)
Button. You should have a triangle with an android janitor while it's saying downloading.
4. You should see a blue rectangle with COM:xx and saying Added. It means that your device is ready to be flashed!
5. Go into the PDA section and select your .tar file.
6. Dont check any option (F.reset time and Auto reboot are checked by default if not than check them).
7. Now click Start.
8. When it's finished, it should say that it's done with a green box and your device should reboot by itself
Good luck:good:
Thanks for your concern but i don't have the .tar file so i'm unable to flash it via ODIN. Can you give me the instruction to flash .zip file through CWM recovery. And what should i do if my external sd is unable to mount?
sandy-13 said:
Thanks for your concern but i don't have the .tar file so i'm unable to flash it via ODIN. Can you give me the instruction to flash .zip file through CWM recovery. And what should i do if my external sd is unable to mount?
Click to expand...
Click to collapse
To flash through CWM you dont need external SD card. You can just copy the file in to Internal SD and flash it.
And for installing stock firmware, you cant just simply do it via CWM, you have to go for Odin only.
For this you need to download your original firmware from sammobile or in xda forums you can find it. Take a research, the above post will help.

[GUIDE] [STOCK ROM] [ODIN] Flashing Stock Rom

Flashing Stock Rom for Samsung Grand Prime
When you are attempt to install rom kernel tweaks etc by instruction when something wrong happened to your phone is brick this is the only way to revert your phone to stock rom and fixing the brick phone which means you are going to in android kitkat 4.4.4 in your phone no modified. in this process if your phone brick neither xda nor me will not responsible for it do at your own risk. these guide is tested on grand prime
i have made this guide for noobs who want to flash their phone
Want to Understand firmware name go here credit @marcussmith2626
Required
1.Samsung USB Driver
2.Odin from here http://odindownload.com/ Please Download Odin 3.0.7 otherwise you will get error
3.Stcok Firmware (In the search box enter your model then select your region then download)
4.Please Maintain battery between 40+
5.PC or Laptop
6.USB
Instructions
Don't Skip any step
1.Download the USB Driver Install in our computer
2.Download the firmware from and extract you will see file tar.md5
3.Power off your grand prime
4.Boot into download mode by pushing volume down + home + power together
5.Press volume up
6.Connect the usb between mobile and computer
7.Extract Odin zip
8.Open Odin.exe
9.When You open you will see yellow color in BOX that means your phone is connected
10.Now Click on PDA and browse to the extract of the firmware and select where the file is firmware file located
11.When the process complete unplug your phone
12.when your phone reboot remove your battery
13.Now push Volume up + power + home together to go in recovery
14.Now navigate to wipe data reset by pressing volume up /down
15.Click on wipe data reset by pressing power
16.Again Navigate to reboot system now and click on it
27.Be patient first boot may take time
Credits
@marcussmith2626
samsung
xda
Reserved
awesome...:good::good:
grand prime
AndroidFire said:
Flashing Stock Rom for Samsung Grand Prime
When you are attempt to install rom kernel tweaks etc by instruction when something wrong happened to your phone is brick this is the only way to revert your phone to stock rom and fixing the brick phone which means you are going to in android kitkat 4.4.4 in your phone no modified. in this process if your phone brick neither xda nor me will not responsible for it do at your own risk. these guide is tested on grand prime
i have made this guide for noobs who want to flash their phone
Want to Understand firmware name go here credit @marcussmith2626
Required
1.Samsung USB Driver
2.Odin from here http://odindownload.com/
3.Stcok Firmware (In the search box enter your model then select your region then download)
4.Please Maintain battery between 40+
5.Pc or Laptop
6.USB
Instructions
Don't Skip any step
1.Download the USB Driver Install in our computer
2.Download the firmware from and extract you will see file tar.md5
3.Power off your grand prime
4.Boot into download mode by pushing volume down + home + power together
5.Press volume up
6.Connect the usb between mobile and computer
7.Extract Odin zip
8.Open Odin.exe
9.When You open you will see yellow color in BOX that means your phone is connected
10.Now Click on PDA and browse to the extract of the firmware and select where pda in file
11.Now Click on CSC and browse to the extract of the firmware and select where csc in file
12.Now click on PHONE and browse to the extract of the firmware and select where modem in file
13.After that click on start button
14.When the process complete unplug your phone
15.when your phone reboot remove your battery
16.Now push Volume up + power + home together to go in recovery
17.Now navigate to wipe data reset by pressing volume up /down
18.Click on wipe data reset by pressing power
19.Again Navigate to reboot system now and click on it
20.Be patient first boot may take time
Credits
@marcussmith2626
samsung
xda
Click to expand...
Click to collapse
where can i get these 3 files?
10.Now Click on PDA and browse to the extract of the firmware and select where pda in file
11.Now Click on CSC and browse to the extract of the firmware and select where csc in file
12.Now click on PHONE and browse to the extract of the firmware and select where modem in file
in the firmware only 1 file is downloaded....
xufy3n said:
where can i get these 3 files?
10.Now Click on PDA and browse to the extract of the firmware and select where pda in file
11.Now Click on CSC and browse to the extract of the firmware and select where csc in file
12.Now click on PHONE and browse to the extract of the firmware and select where modem in file
in the firmware only 1 file is downloaded....
Click to expand...
Click to collapse
Screenshot pls
Same issue, cant install firmware
i m from Pakistan, i have downloaded 2 firmwares from this link http://www.sammobile.com/firmwares/database/SM-G530H/PAK/ , January and February, both zip files has only 1 file in them.
screenshot, as u can see there is only 1 file in both firmwares
---------- Post added at 11:01 AM ---------- Previous post was at 10:58 AM ----------
AndroidFire said:
Screenshot pls
Click to expand...
Click to collapse
screenshot, as u can see there is only 1 file in both firmwares
Same problm plz help
For those who get Only one file in extracted file you need to select the file as pda
One file…… faild plez help
AndroidFire said:
For those who get Only one file in extracted file you need to select the file as pda
Click to expand...
Click to collapse
already did that with both firmwares, using odin 3.07 and 3.09, both failed n same error
Yeah me too.. when i put file on pda and start will get error fail get auth.
what should i do sir..please help!!
Same goes for me. it failed as well
This is how i did.....
I hvae 3.0.7 and 3.10.6 Odin3.
Downloaded the driver... installed it....
I just put the stock rom file in PDA and booted my phone to download mod.. . .. . . . .
Waited it to show the word added in the white box section in the tool...dn pressed start....
After its finished let it reboot nd dnt take the cable out.... (just like that)
(If u want.... go to the recovery and format it and done) or else its already done.
No probs . :fingers-crossed::good:
Hi Guys,
When I bought my Grand Prime I installed the ROM G530HVJU1ANI8 and it works so I installed the new version G530HZTM1ANJ2 and it works too.
Now there are two new versions for my region that show up a message error like that : Odin just errors: Failed [Auth].
I used the Odin 3.07 and 3.09 versions
I'm using the Odin with only one file in extracted file choosing the file as pda
2014-09-01 Brazil (TIM) 4.4.4 G530HVJU1ANI8 G530HZTM1ANI8 - OK
2014-11-01 Brazil (TIM) 4.4.4 G530HVJU1ANJ2 G530HZTM1ANJ2 - OK
2015-02-01 Brazil (TIM) 4.4.4 G530HVCU1ANL4 G530HZTM1ANL4 - failed
2015-03-01 Brazil (TIM) 4.4.4 G530HVCU1AOB1 G530HZTM1AOB1 - failed
Someone from BR updated the recently ROM sucessfully or someone can help me to update ?
The mobile is not rooted.
Thanks
pjunior1976 said:
Hi Guys,
When I bought my Grand Prime I installed the ROM G530HVJU1ANI8 and it works so I installed the new version G530HZTM1ANJ2 and it works too.
Now there are two new versions for my region that show up a message error like that : Odin just errors: Failed [Auth].
I used the Odin 3.07 and 3.09 versions
I'm using the Odin with only one file in extracted file choosing the file as pda
2014-09-01 Brazil (TIM) 4.4.4 G530HVJU1ANI8 G530HZTM1ANI8 - OK
2014-11-01 Brazil (TIM) 4.4.4 G530HVJU1ANJ2 G530HZTM1ANJ2 - OK
2015-02-01 Brazil (TIM) 4.4.4 G530HVCU1ANL4 G530HZTM1ANL4 - failed
2015-03-01 Brazil (TIM) 4.4.4 G530HVCU1AOB1 G530HZTM1AOB1 - failed
Someone from BR updated the recently ROM sucessfully or someone can help me to update ?
The mobile is not rooted.
Thanks
Click to expand...
Click to collapse
Hay I'm from Bangladesh. My cse is xef south Africa. Failed to update new firmware of south Africans n Brazilian ( tim). these r curapted n failed. So I successfully update new Kazakhstan firmware by Odin 3.10. 6 n its ok. Link: http://forum.xda-developers.com/showthread.php?t=2711451, Oh my bd mobile network is free n SIM is unlock also.
Edit: Rooted my phone by "cf auto root by mohon" n works well.
Happy flashing
cdaarif said:
Hay I'm from Bangladesh. My cse is xef south Africa. Failed to update new firmware of south Africans n Brazilian ( tim). these r curapted n failed. So I successfully update new Kazakhstan firmware by Odin 3.10. 6 n its ok. Oh my bd mobile network is free n SIM is unlock also.
Edit: Rooted my phone by "cf auto root by mohon" n works well
Click to expand...
Click to collapse
Happy flashing
philippines
will this be possible to the philippine grand prime variant?
thanks alot!
iandarylmartin said:
will this be possible to the philippine grand prime variant?
thanks alot!
Click to expand...
Click to collapse
Try ur self n report here. If u free from ur carrier/network n SIM, I think then u succeed.
FAIL (AUTH)
For ppl who try flashing your device with new released firmware and got a message say "FAIL (AUTH)" in your odin,.. it is means you downloaded the wrong firmware region and that firmware is not compatible with your device..
You can try download another firmware region and re-try flash you device,..
My device is SM-G530H made in vietnam, i bough this phone on my country indonesian,..
The firmware worked for my device is kazakhstan region (i flashed it on early Feb and worked well) and also indonesian region (i flashed it on early March and worked well also)
Hope this helps

[DOWNLOAD] Samsung Galaxy Alpha AT&T (SM-G850A) KitKat & Lollipop Firmware

NOTE: I NO LONGER SUPPORT THIS DEVICE, SO I MAYBE LIMITED ON THE NUMBER OF QUESTIONS I CAN ANSWER THAT ARE RELATED TO THE DEVICE!
EDIT: NOW REQUESTING TESTERS FOR THE BOC7 & BOC8 FIRMWARES (FILES NOT YET OBTAINED, SO I DO NOT RECOMMEND APPLYING ATM). NOT RECOMMENDED IF YOU USE YOUR ALPHA AS A DAILY DRIVER! BEFORE "APPLYING", YOU MUST...
-Understand and be okay with the high-ish possibility of having your device brick during/after flash.
-Understand that if something does go wrong, you cannot put the blame on me. Follow all safety instructions for flashing and it should work fine.
PM ME IF INTERESTED!
Here you can download the official KitKat and Lollipop firmware for the SM-G850A.
As of right now, the SM-G850A can no longer be rooted.
Download Links:
KitKat 4 File Firmware Download (G850AUCU1ANH8): https://mega.nz/#!q4YBEYya!vvBRgCaq7EAhtQoaauuGiOL4h9ZWC11KtiMIzX29gns
KitKat Combo Firmware Download (G850AUCU1ANH8): https://mega.nz/#!6kgGSDpa!JhjNMpsKwQqPqv5EAyqsWteKcSthVe8WBqNcxB2afJE
Lollipop 4 File Firmware Download (G850AUCU1BOC6): https://mega.nz/#!6swkzbhb!eNhUkZqvVcNthluHQe4Gkmpa4dkAdvEyYaZ-u3OSyrc
Lollipop Combo Firmware Download (G850AUCU1BOC6): https://mega.nz/#!fgZ0iTxJ!Pwh6Laa1EyLAFgYuqfwUzR9BfpgwCnMgRWTD1x1JZW4
Odin v3.12 Download: https://mega.nz/#!KsZiHKTb!aEHdQgO7JAQeUwdJWqS0xoR3lyJH4ieJ6qTbVKce8Zk
If the links go down or won't work for some reason, please let me know.
Developers Tip: If you want to flash firmware without wiping your data, make sure there is no pit file selected under the PIT tab in Odin, then extract and remove cache.img.ext4 then repack as a .tar file. Applies to both combo and 4 file firmware packages. In 4 file packages, cache.img.ext4 is in the CSC file. However, in some cases this may put your device in a bootloop.
Cheers!
Sorry but... what is the diference between "4 file" and "combo"?
ifgiovanni said:
Sorry but... what is the diference between "4 file" and "combo"?
Click to expand...
Click to collapse
The simplest way to explain 4 file is in Odin, there are 4 firmware slots. The "4 File .rar package" has the correct file for each slot in Odin to flash. Example, extract the .rar package you (might have) downloaded, and you will see 4 .tar files and the pit file. So the BL_xxx_xxxxxxxx_xxxxxxxx_xxxxxx_HOME.tar file would go in the BL slot in Odin.
Combo is basically all of those files that would be in the 4 .tar archives put into one. If you choose to download this file, the .tar package must be flashed though the AP slot in Odin.
And the .PIT file would go under the PIT tab in Odin.
If you don't want to lose your data while flashing, you can do this:
-Don't use the pit file in Odin
--or--
-If you chose to download the 4 file firmware, don't flash the CSC file and don't use the pit file.
--or--
-if you chose to download the combo firmware, you can use 7zip (I recommend downloading it onto your pc if you don't have it already) to extract the archive and delete cache.img.ext4, then repack the remaining files (Except the pit file) into a new .tar archive.
Cheers!
KingOfTheNet said:
The simplest way to explain 4 file is in Odin, there are 4 firmware slots. The "4 File .rar package" has the correct file for each slot in Odin to flash. Example, extract the .rar package you (might have) downloaded, and you will see 4 .tar files and the pit file. So the BL_xxx_xxxxxxxx_xxxxxxxx_xxxxxx_HOME.tar file would go in the BL slot in Odin.
Combo is basically all of those files that would be in the 4 .tar archives put into one. If you choose to download this file, the .tar package must be flashed though the AP slot in Odin.
And the .PIT file would go under the PIT tab in Odin.
If you don't want to lose your data while flashing, you can do this:
-Don't use the pit file in Odin
--or--
-If you chose to download the 4 file firmware, don't flash the CSC file and don't use the pit file.
--or--
-if you chose to download the combo firmware, you can use 7zip (I recommend downloading it onto your pc if you don't have it already) to extract the archive and delete cache.img.ext4, then repack the remaining files (Except the pit file) into a new .tar archive.
Cheers!
Click to expand...
Click to collapse
have a problem. The process dont continue of step "apnhlos". Can you help me?
How to flash Lollipop rom on alpha. I Don't know how to flash 4 files via Odin. I have G850A Unlocked from AT&T model.
What Are the Steps for Data wipe and all that kind of Stuff Please Explain me all the steps to flash the rom on my Alpha.
Whatsapp me on +919665958993
ilive.co.in said:
How to flash Lollipop rom on alpha. I Don't know how to flash 4 files via Odin. I have G850A Unlocked from AT&T model.
What Are the Steps for Data wipe and all that kind of Stuff Please Explain me all the steps to flash the rom on my Alpha.
Whatsapp me on +919665958993
Click to expand...
Click to collapse
Open Odin and look to the right of the window, you will see 4 buttons, named "BL" "AP" "CP" and "CSC"
Extract the respective 4 file firmware from the downloaded .rar package to your desktop or downloads folder and open the folder once completed.
From there, you can insert the 4 .tar files into Odin. Once in Odin, click on the BL slot and navigate to the folder that contains the extracted files. Once there, select the tar file with the letters BL at the very beginning, and vice versa.
Example: BL_G850AUCU1BOC6_G850AATT1BOC6_LRX22G_HOME.tar (which is the bootloader files for lollipop firmware) would go under the BL slot in Odin.
Screenshot: https://mega.nz/#!2pZlGboI!M5YA2RGn0ufZ_bdVIFg6AD3xIH3iHg00JrAgHoo0OP8
If you downloaded the combo (all in one) firmware package, extract everything in the .rar file and place the .tar package under the AP slot in Odin, and if you want to perform a clean reset, make sure the .PIT file is under the PIT tab then PIT slot in Odin and make sure that "NAND Erase All" and "Re-Partition" is checked under the 'Options' tab.
ifgiovanni said:
have a problem. The process dont continue of step "apnhlos". Can you help me?
Click to expand...
Click to collapse
Did you download the 4 file or combo package?
ilive.co.in said:
How to flash Lollipop rom on alpha. I Don't know how to flash 4 files via Odin. I have G850A Unlocked from AT&T model.
What Are the Steps for Data wipe and all that kind of Stuff Please Explain me all the steps to flash the rom on my Alpha.
Whatsapp me on +919665958993
Click to expand...
Click to collapse
Also are you wanting to wipe your data or no?
ifgiovanni said:
have a problem. The process dont continue of step "apnhlos". Can you help me?
Click to expand...
Click to collapse
I've tested all 4 of the firmware packages and each of them flashed no problem. What firmware version are you on right now? You can check that by going into Settings --> Device --> About Device.
KingOfTheNet said:
I've tested all 4 of the firmware packages and each of them flashed no problem. What firmware version are you on right now? You can check that by going into Settings --> Device --> About Device.
Click to expand...
Click to collapse
I tried with combo and with 4 files.
I have 5.0.2.
ifgiovanni said:
I tried with combo and with 4 files.
I have 5.0.2.
Click to expand...
Click to collapse
The device hasn't received any ota updates so the flash should work. Did you download the version of Odin I posted on this thread? And did you try the lollipop or the kitkat firmware?
KingOfTheNet said:
The device hasn't received any ota updates so the flash should work. Did you download the version of Odin I posted on this thread? And did you try the lollipop or the kitkat firmware?
Click to expand...
Click to collapse
Yes i tried with the version that you posted.
Is necesary to wipe data?
ifgiovanni said:
Yes i tried with the version that you posted.
Is necesary to wipe data?
Click to expand...
Click to collapse
Wiping data will be pointless if Odin can't flash the firmware completely. Did you test the lollipop firmware or the kitkat firmware?
KingOfTheNet said:
Wiping data will be pointless if Odin can't flash the firmware completely. Did you test the lollipop firmware or the kitkat firmware?
Click to expand...
Click to collapse
First time with kitkat I left it all night and it didnt end.
I have disconnected the phone in the morning and not started, then I installed the bootloader (of lolipop) alone and it is doing well.
ifgiovanni said:
First time with kitkat I left it all night and it didnt end.
I have disconnected the phone in the morning and not started, then I installed the bootloader (of lolipop) alone and it is doing well.
Click to expand...
Click to collapse
Try booting your phone into download mode then reflash the Lollipop bootloader in Odin (BL File goes under the BL slot for 4 file). If you are not wanting to wipe your data, and if you downloaded the 4 file firmware, you can simply reflash the lollipop bootloader files then afterwards go back into download mode then reflash the AP and CP file. The actual bootloader in the phone does allow the flashing of different firmware versions for the device so it sounds like a small bootloader issue.
ifgiovanni said:
First time with kitkat I left it all night and it didnt end.
I have disconnected the phone in the morning and not started, then I installed the bootloader (of lolipop) alone and it is doing well.
Click to expand...
Click to collapse
You also said that Odin was stuck on something during flash. Do you know what file was it stuck on (What file it said at the top left-hand corner of the Odin window)?
ifgiovanni said:
First time with kitkat I left it all night and it didnt end.
I have disconnected the phone in the morning and not started, then I installed the bootloader (of lolipop) alone and it is doing well.
Click to expand...
Click to collapse
Try a different usb port on your computer, and if the same thing happens, try a different usb cable or switch the ports again.
No roots available still for g850a?There are other sites showing a root method
Is it possible to root if the g850a is flashed back to kit kat? has any one tried to flash the TWRP recovery available on their website for the slte? is that only for the exynos version? and possible try rooting throgh there?
kevace1 said:
Is it possible to root if the g850a is flashed back to kit kat? has any one tried to flash the TWRP recovery available on their website for the slte? is that only for the exynos version? and possible try rooting throgh there?
Click to expand...
Click to collapse
The G850A Has a locked bootloader, therefore, cannot run TWRP or any custom kernel or recovery.
Cheers!

Categories

Resources