This mod depends on Samsung framework and wil not work on CM7 or other AOSP based builds.
Edit:
Well its done! Check out de video i made: http://www.izlesene.com/video/galaxy-s2-fancy-rotation-animation/5208061
A video from someone with better vidskillz
thnx mccune
I am testing if everything works on the phone. If so i will post instructions
Disclaimer: Thanks go out to Samsung for integrating fancy rotation in Gingerbread on the Note.
I only did find out which file caused the fancy rotation. (Why dev if it allready exists right?)
Attached libsurfaceflinger.so and libsurfaceflinger_client.so are from a 2.3.6 Note rom (KKA i believe)
Edit2:
Aight here it comes. This is tested to be working 100% on GB 2.3.6 XWKK2:
Push atached libsurfaceflinger.so and libsurfaceflinger_client.so to /system/lib
or copy it with rootexplorer and replace, your phone will soft reboot.
or create a cwm zip and share
voila
Custom rom builders: sacrafice your roms to this mod
CWM flashable zip by Intratech
Allright. I will make some sparetime and dive in to The note source to figure out if i can find something in myorientationlistener. I think The mFancyRotationAnimation could give something
Sent from my GT-I9100 using XDA App
go for it
but i hope samsung implements it officially in S2 too.
I did it. Instructions coming soon
Sent from my GT-I9100 using XDA App
imparator said:
I did it. Instructions coming soon
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Ek is baie nuuskierig na die resultaat!
Please use Only English Thank you
Really cool! awsome work
Video skill abit choppy tho
About video skill i had to tape it with a galaxy s, sowwy
Better videos will come by other users for shur
mynamesteve said:
Really cool! awsome work
Video skill abit choppy tho
Click to expand...
Click to collapse
imparator said:
About video skill i had to tape it with a galaxy s, sowwy
Better videos will come by other users for shur
Click to expand...
Click to collapse
only joking about the video its all about the devving! turned my head 90 degrees and all was good :
Im just backing up then off to experiment with 2.3.5 ill let you know how it goes
Works fine on KI8. Thanks!
Works well with XWKI8 (2.3.5) - too late
I know you were joking m8
mynamesteve said:
only joking about the video its all about the devving! turned my head 90 degrees and all was good :
Im just backing up then off to experiment with 2.3.5 ill let you know how it goes
Click to expand...
Click to collapse
Sent from my GT-I9100 using XDA App
imparator said:
I know you were joking m8
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
gotta get the jokes in before the sea of repeat questions or they get lost
Working really well on hyperdroid rom
thank you.
Tried this on CheckRom RevoHD v4 KK5 Works great Thanks
IakobosJ said:
Tried this on CheckRom RevoHD v4 KK5 Works great Thanks
Click to expand...
Click to collapse
Can confirm, works fine on CheckRom.
Okay, one small problem, sometimes if locking the phone upside down with CRT-animation on (both on screen off and screen on), when the screen comes on(press a button or something), sometimes the image shown on the screen is upside down and mirrored, but the touchscreen remains the same (not upside down), but it goes away when you unlock the phone. I don't know if it's from this or something else though.
Works on checkrom v4!!!
Sent from my GT-I9100 using Tapatalk
Skarium said:
Can confirm, works fine on CheckRom.
Okay, one small problem, sometimes if locking the phone upside down with CRT-animation on (both on screen off and screen on), when the screen comes on(press a button or something), sometimes the image shown on the screen is upside down and mirrored, but the touchscreen remains the same (not upside down), but it goes away when you unlock the phone. I don't know if it's from this or something else though.
Click to expand...
Click to collapse
Noticed that too just now. Also after a reboot: Under CRT-Animations the image is flipped upside down
Awesome!!! But it needs a little bit of work, because it doesn't display correctly the images in Gallery when rotating.
No probs on XWKK2. Also no flipped image on lock here.
I can not reproduce the errors yo mention.
Konstantinos said:
Awesome!!! But it needs a little bit of work, because it doesn't display correctly the images in Gallery when rotating.
Click to expand...
Click to collapse
Sent from my GT-I9100 using XDA App
Try pushing libsurfaceflinger_client.so attached in first post in /system/lib
Skarium said:
Can confirm, works fine on CheckRom.
Okay, one small problem, sometimes if locking the phone upside down with CRT-animation on (both on screen off and screen on), when the screen comes on(press a button or something), sometimes the image shown on the screen is upside down and mirrored, but the touchscreen remains the same (not upside down), but it goes away when you unlock the phone. I don't know if it's from this or something else though.
Click to expand...
Click to collapse
Try pushing libsurfaceflinger_client.so attached in first post in /system/lib
Konstantinos said:
Awesome!!! But it needs a little bit of work, because it doesn't display correctly the images in Gallery when rotating.
Click to expand...
Click to collapse
Related
Sorry if anyone already knows this,
But on facebook, they just realised the full version and getting it on the official getjar website will just lead you to dl the demo.
however they also gave another link which has the full version , it says demo, but when you dl the apk it is not.
http://m.getjar.com/mobile/43600/an...137289&sid=wKHCk1QZA&c=k3wv6kbjlat505&lang=en
works fine for me, sorry if anyone already knows about this.
you may have to wait a bit, you might notice that when you launch it all you see is a blue screen, just wait a while .
sweet if this workes =)
i also just found out that if you cant get past the blue screen, lock your phone pressing power button, then unlock it, then it should work , even though this might be annoying, at least it works
kevin2516 said:
http://m.getjar.com/mobile/43600/an...137289&sid=wKHCk1QZA&c=k3wv6kbjlat505&lang=en
Click to expand...
Click to collapse
Can you please send me the apk-file to my mail?
Cant get in to that link from my job.
Akerhage said:
Can you please send me the apk-file to my mail?
Cant get in to that link from my job.
Click to expand...
Click to collapse
i don't have your email? lol
kevin2516 said:
i don't have your email? lol
Click to expand...
Click to collapse
Look your PM =)
is this the same?
http://www.getjar.com/mobile/43600/angry-birds-for-htc-wildfire/
i've just emailed you , and no it's not the same, i said previously that they posted the wrong file on that site, but the mobile version has the correct one .
kevin2516 said:
i've just emailed you , and no it's not the same, i said previously that they posted the wrong file on that site, but the mobile version has the correct one .
Click to expand...
Click to collapse
Thank you, my phone is trying now to download the content from your mail, have been loading for 5-7 minutes now! Want to test this! =)
Hope it will work! Then I have something do do on my 1+ hour way home from work =)
kevin2516 said:
you may have to wait a bit, you might notice that when you launch it all you see is a blue screen, just wait a while .
Click to expand...
Click to collapse
Have had the bluescreen now for maybe 7-8minutes, did you have to wait this long?
lock your phone using power button and unlock it
kevin2516 said:
lock your phone using power button and unlock it
Click to expand...
Click to collapse
Wery strange now!
Have a blue screen, when dragin my finger from the left side to the right on the screnn the colours changes to green, dark blue, orange and blue...what is wrong now?
Akerhage said:
Wery strange now!
Have a blue screen, when dragin my finger from the left side to the right on the screnn the colours changes to green, dark blue, orange and blue...what is wrong now?
Click to expand...
Click to collapse
LOL all i did was while the app is on the blue screen, just lock phone, and then unlock it, should work. did for me , im up to lvl 13 now
kevin2516 said:
LOL all i did was while the app is on the blue screen, just lock phone, and then unlock it, should work. did for me , im up to lvl 13 now
Click to expand...
Click to collapse
Dont work for me...hmm, something I can do to fix this maybe?
Akerhage said:
Dont work for me...hmm, something I can do to fix this maybe?
Click to expand...
Click to collapse
maybe cause of the htc lock screen? lol, i flashed 0201 of wildpuzzle and have vanilla android lockscreen
kevin2516 said:
maybe cause of the htc lock screen? lol, i flashed 0201 of wildpuzzle and have vanilla android lockscreen
Click to expand...
Click to collapse
I have no lockscreen
Had it put away with "No lock"...maybe working if I enable the lockscreen again? =)
Akerhage said:
I have no lockscreen
Had it put away with "No lock"...maybe working if I enable the lockscreen again? =)
Click to expand...
Click to collapse
oh no wonder, yes enable lock screen xD
kevin2516 said:
oh no wonder, yes enable lock screen xD
Click to expand...
Click to collapse
Haha, it worked! very very strange this
Akerhage said:
Haha, it worked! very very strange this
Click to expand...
Click to collapse
ironic thing is that they sent an email that it does not support qvga devices yet, but they will fix it xD, but hahaha it works although resolution doesn't fit properly, still fine
kevin2516 said:
ironic thing is that they sent an email that it does not support qvga devices yet, but they will fix it xD, but hahaha it works although resolution doesn't fit properly, still fine
Click to expand...
Click to collapse
Its very slowly going on my phone! Maybe to much other apps installed that makes the phone slower...hmm, want to speed up this game....maybe with a OC-kernel?
Hi all.
I have just installed the FFC and tried it in Skype.
I now use Bionix NexGen V2 ROM.
I have performed tests with both Bali1.8.8UV and packaged (with ROM) Kernels.
In both cases my picture in Skype is rotated 180 degrees.
As the camera I've bought is suspected to be some clone,and
I don't 100% trust it. I would like to know whether this is normal behavior,
and it has some cure, or I have to send the camera back and ask for refund.
BTW, FFC worked in Skype without any problem and did not require any modification
in build.prop or anything else.
Thank you in advance for your answers!
PS: It would be great if someone who is satisfied with his camera, could let me know what is written on his FFC chip,
or post a picture of the whole thing so that I can compare it to one I have.
Mine was bought on ebay here .
And of course, please don't buy from them, until I will confirm they can be trusted.
Besides the angle issue, I also have a feeling that the main (rear) camera adds
some yellow tone in the center of a picture.
I would like you to post where did you buy your camera, in case you are happy with it.
Thanks!
Its not the camera. Its the firmware causing the rotation. I remember my ffc was like that on bionix.
Sent from my GT-I9000 using XDA App
trailblazerz11 said:
Its not the camera. Its the firmware causing the rotation. I remember my ffc was like that on bionix.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
So what was the solution?
It was a while ago.
But I believe camera workd right on i9000 based roms. Not sure.
Sent from my GT-I9000 using XDA App
f_mulder said:
So what was the solution?
Click to expand...
Click to collapse
Edit your build.prop (root explorer or sgs tools)
ro.product.model=SGH-T959
ro.product.name=SGH-T959
ro.product.device=SGH-T959
ro.product.board=SGH-T959
ro.build.product=SGH-T959
change SGH-T959 to GT-I9000
I attached sgstools here just in case.
I thought that changing values in build.prop won't have any effect at all,
but I was wrong.
Suggested changes caused the angle to change from 180 degrees to 90 degrees.
Are there any settings that will show my pic with no rotation at all?
Thanks!
f_mulder said:
I thought that changing values in build.prop won't have any effect at all,
but I was wrong.
Suggested changes caused the angle to change from 180 degrees to 90 degrees.
Are there any settings that will show my pic with no rotation at all?
Thanks!
Click to expand...
Click to collapse
try SGH-T959V and see if works correclty, also try using bionix frost (Vibrant 4g port)
It is offtopic, but does bionix frost have working GPS?
f_mulder said:
It is offtopic, but does bionix frost have working GPS?
Click to expand...
Click to collapse
Yes.
Sent from my SGH-T959V using xda premium
jrafael said:
try SGH-T959V and see if works correclty, also try using bionix frost (Vibrant 4g port)
Click to expand...
Click to collapse
That didn't work, nor did Bionix Frost.
Angle becomes 180 degrees again.
But thank you anyway!
This is why I left bionix so long ago. Install an I9000-based rom.
JJMT said:
This is why I left bionix so long ago. Install an I9000-based rom.
Click to expand...
Click to collapse
Can you recommend something specific?
With working GPS?
Hi all, I have a question with SBeam.
I have everything enabled (Wifi direct on, nfc on, Sbeam on) and when i put my two S3's together it says touch to beam. After I touch to beam nothing happens... and no files get sent. Anyone else having this problem?
yeah same here but i thought it was because of that i have a custom rom and my wife is on (still) stock. and that it doesnt work cuz of my custom rom
freebordjunky said:
yeah same here but i thought it was because of that i have a custom rom and my wife is on (still) stock. and that it doesnt work cuz of my custom rom
Click to expand...
Click to collapse
I am on foxhound custom Rom ....
n for me sbeam works perfectly
Sent from my GT-I9300 using xda premium
how do you make it work for you?
any special steps?
i tap the phones back to back.. press the photo to beam.. then nothing happens after that
vegeta1 said:
I am on foxhound custom Rom ....
n for me sbeam works perfectly
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
alextn99 said:
how do you make it work for you?
any special steps?
i tap the phones back to back.. press the photo to beam.. then nothing happens after that
Click to expand...
Click to collapse
Try tapping to beam, then pull the phones apart a little bit - that worked for me yesterday!
I'm on CM9, and I've had this annoying issue where the one or two keys on the keyboard would become temporarily unresponsive, causing me to hit a different key. Any fixes?
Sent from my HTC Ruby using xda app-developers app
jcjackjay said:
I'm on CM9, and I've had this annoying issue where the one or two keys on the keyboard would become temporarily unresponsive, causing me to hit a different key. Any fixes?
Sent from my HTC Ruby using xda app-developers app
Click to expand...
Click to collapse
Seems like a lot of people are getting the same problem... And it seemed that it is not only for CM9; but on almost all custom ROMs. This problem doesn't happen to everyone; but seemed to happen to quite a number of people (some quote from CM9 thread)
ifatalityx said:
Probably worth mentioning, are you guys using the defualt Android keyboards? I am not, I use SmartKeyboard Pro and I do notice it time to time.
Click to expand...
Click to collapse
rikishef said:
Happens to me too, but once I turn off the screen and turn it back on it works fine
Sent from my HTC_Amaze_4G using xda app-developers app
Click to expand...
Click to collapse
ifatalityx said:
I'm not on CM9, but now that you said that I kind of realized that just now after I wrote a paragraph. Even now as I am typing this I feel it hanging just a little bit. Words aren't that responsive. Could be when there is a lot of text on the screen it bugs out.
Sent from my HTC_Amaze_4G
Click to expand...
Click to collapse
Thaxtonator said:
Yes sir happens to me on every custom rom, Tried warranty exchange and new phone still had the problem.
Click to expand...
Click to collapse
I also got this problem (both on speed rom 6.5 and energy stock 8/1).... I have no clue as to why it happen though. Happened to two different Amaze unit and doesn't happen all the time. So, it might not be hardware related; but, rather software related
this would happen if you used a 3rd party lockscreen on sense because the lockscreens mess with multi touch. try this out and see if it helps
http://forum.xda-developers.com/showthread.php?t=1652038
mrmako777 said:
this would happen if you used a 3rd party lockscreen on sense because the lockscreens mess with multi touch. try this out and see if it helps
http://forum.xda-developers.com/showthread.php?t=1652038
Click to expand...
Click to collapse
Ill try this out, thanks man
mrmako777 said:
this would happen if you used a 3rd party lockscreen on sense because the lockscreens mess with multi touch. try this out and see if it helps
http://forum.xda-developers.com/showthread.php?t=1652038
Click to expand...
Click to collapse
OMG, i never thought of that. I did use Holo Locker because I don't like the fact that I can pull down the status bar on the lock screen (and I'm bored with sense locker too)
I probably have seen your thread; but, never really think it's related because I only realize the issue on the keyboard... I guess, I will try your fix and give an update later when I get back to my Amaze.
Thank you so much
Thaxtonator said:
Ill try this out, thanks man
Click to expand...
Click to collapse
Don't forget to hit the "Thanks" button on his beautiful post
shuvarts said:
OMG, i never thought of that. I did use Holo Locker because I don't like the fact that I can pull down the status bar on the lock screen (and I'm bored with sense locker too)
I probably have seen your thread; but, never really think it's related because I only realize the issue on the keyboard... I guess, I will try your fix and give an update later when I get back to my Amaze.
Thank you so much
Don't forget to hit the "Thanks" button on his beautiful post
Click to expand...
Click to collapse
lolol no problem man, enjoy :highfive:
Testing now
Having the same issue but on CM9 there is no sense at all so it can't be the same reason...
I keep having the same problem. Especially when it comes to gaming. I tried playing Dead Trigger but the touch controls lag become so unresponsive. I tried running another ROM, and I don't have the issue. It appears only in CM9 for me
Sent from my HTC Ruby using xda app-developers app
johnride said:
Having the same issue but on CM9 there is no sense at all so it can't be the same reason...
Click to expand...
Click to collapse
jcjackjay said:
I keep having the same problem. Especially when it comes to gaming. I tried playing Dead Trigger but the touch controls lag become so unresponsive. I tried running another ROM, and I don't have the issue. It appears only in CM9 for me
Sent from my HTC Ruby using xda app-developers app
Click to expand...
Click to collapse
Well, I suppose we need to wait for CM9 fix and just be patient.... They are still working to get all the features working (we are so close with data)... So, just wait patiently Besides, we're pretty much 'leeching' here
Hey guyz, must have heard about the devices like Xperia Sola and samsung galaxy SL making a lots of buzz with an awesome feature, that lets you use the touchscreen without actually touching it. Hover your finger over the screen and you are good to go. The feature called Floating touch was dug out by Shiromman. And thanks to him, he hinted me to modify the correct values to get Floating touch working even on our galaxy 3. I've tried and tested it.
##NOTE (EDIT): NOW TRIED AND TESTED ON ALL ROMS. FROYO,GINGERBREAD,ICE CREAM SANDWICH, JELLY BEAN .##
**Very difficult to get used to. Might register touches even when not touched.
**Rebooting will restore original touch sensitivity settings.
**Might eat up more battery. Not tested.
**No other problems reported, which may potentially harm the device.
EDIT: NOW THE FOLLOWING CODE NEEDS NOT TO BE EXECUTED, THERE'S AN APP AVAILABLE FOR THIS PURPOSE, HERE http://forum.xda-developers.com/showthread.php?p=32678618 Download the app from this thread. Version 1.2 and later supported. Thank the developer.
The app gives the liberty to change the sensitivity values on the go. Enable and disable on your wish.
The following method can also be used.
Here is the code you need to type in the terminal emulator to get Floating touch.
Code:
su
echo 7007 > sys/class/touch/switch/set_touchscreen
cat sys/class/touch/switch/set_write
NOTE: The value after echo 70XX defines the sensitivity level. Lower the value, more the sensitivity. THE VALUES BELOW 07 MAY CAUSE TOO MUCH SENSITIVITY, RESULTING IN UNREGISTERED TOUCHES. RECOMMENDED VALUE 07
Hope you guyz like it. And yeah, once again thakx to Shiromman for helping me and for finding this stuff out. Also thanks to loSconosciuto who originally discovered the property.
Just noticed an awesome thing. You can use a pen with some metal in its cap as a very easy to use stylus. It works even if you dont touch the metallic part. Here is *NOT* a good video demo. (I am actually bad at videos)
gonna try it on cm7 lets see what happens
FEEDBACK!
Okay, so I tried it on CM7 and it works great in it.
Also I was fiddling around a bit with the values. Tried changing it to "06" and found the floating touch to be more responsive!
However, when I tried with "05", the floating touch worked fine, however it completely messed up the normal touch and made it nearly impossible for me to use the phone! :silly:
Interesting. Would be great for people who have cracked screens
here is how to remove:
su
echo 7032 > sys/class/touch/switch/set_touchscreen
cat sys/class/touch/switch/set_write
Works Fine on CM10 by marcellusbe Experimental build.
But users would need some time to get used to it.
Thanks for the tip
By the way why are we "cat" the set_write file in the given lines?
bauxitpz said:
here is how to remove:
su
echo 7032 > sys/class/touch/switch/set_touchscreen
cat sys/class/touch/switch/set_write
Click to expand...
Click to collapse
You can reboot the phone and it resets back to normal :laugh::good:
ak700 said:
You can reboot the phone and it resets back to normal :laugh::good:
Click to expand...
Click to collapse
okay, that means i have to make a init.d script to set this after each reboot.
It work fine in cm7. Thanks
Sent from my GT-I5800 using xda app-developers app
Is it compatible on froyo. Too?
Sent from my GT-I5800 using xda premium
Arjav23 said:
Is it compatible on froyo. Too?
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
To test, first check whether the directory
sys/class/touch/switch/set_touchscreen is there or not. If its there, the try executing the command via terminal emulator. It shall work. Hopefully. Do report it.
Arjav23 said:
Is it compatible on froyo. Too?
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
yes it works on froyo I tested on kyrillos ROM...
arun356y said:
yes it works on froyo I tested on kyrillos ROM...
Click to expand...
Click to collapse
How about purumod
Will it work on this too
sent from my awesome g3
hit thanks if i helped or asked u
in froyo also work fine, but sometimes the touchscreen don't work correctly and i need reboot
Sent from my GT-I5800 using xda app-developers app
It will work on every Froyo ROM. Try it.
nishant_713 - nice to see that it worked well and thanks for the credits
oh yes nd one more thing .. it will work on any rom since its the same device once u find the location it'll work on every rom for the phone !i guess we put xperia sola to shame eh ? lol Cheers
nishant_713 said:
##NOTE: ONLY TESTED ON SLIMBEANS JELLYBEAN ROM. NEED FEEDBACK FOR OTHER ROMS.##
Click to expand...
Click to collapse
Tried & tested.........working Great in
Froyo , GB , ICS & JB.......
Works for everything.....
raja4sure said:
Tried & tested.........working Great in
Froyo , GB , ICS & JB.......
Works for everything.....
Click to expand...
Click to collapse
No touchscreen problem in froyo?
sent from my awesome g3
hit thanks if i helped or asked u
Floating touch control app by matorno1 with support for galaxy 3 coming soon..
Sent from my GT-I5800 using xda premium
Arjav23 said:
Is it compatible on froyo. Too?
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
Yes, I've tried it on Kisadworx v2.3 and it works beautiful. And also, the Battery Draining is not really big!!