[HOW-TO] Revert back to stock with LOCKED bootloader - Atrix 4G Q&A, Help & Troubleshooting

I saw a lot of questions from other people asking how to revert back to stock rom !!!2.3.4!!! with locked bootloader. I found a way but please USE THIS AT YOUR OWN RISK.
What I did.
1. Downloaded !!!2.3.4!!! ROM from Atrix Firmwares Superthread (Official Firmware Team of M3) thread. In my case it was the latest Retail UK.
2. Flash it using sbf_flash under linux or RSD LIte (windows)
3. Usually if you come from CM7 after flashing and booting you will get a boot loop.
4. Flash the unlocked bootloader again and install recovery using fastboot
5. WIPE/CLEAN DATA/CACHE and DALVIK
6. Flash again the ROM with sbf_flash or RSD Lite
Reboot and enjoy...
If you have broblems booting the device, remove the battery and then try again.
IF YOU BRICK YOUR DEVICE, DON'T BLAME ME. IT IS A DIRTY METHOD AND NOT WELL TESTED.

for me i do this first,
1. boot to recovery
format sd/sd-ext
Wipe Dalvik
wipe cache
factory reset/data
2. boot into fastboot
fastboot erase boot
fastboot erase system
fastboot erase userdata
fastboot erase cache
fastboot erase webtop
fastboot erase preinstall
fastboot reboot
3. Flashing 2.3.4 ROM
flash your desire version on ROM using RSD Lite
thanks to
CaelanT (http://forum.xda-developers.com/showpost.php?p=17656035&postcount=5)
matematic (http://forum.xda-developers.com/showpost.php?p=19708737&postcount=1)
i got same like stock.. nice info
but please remember, risk to soft/hard brick your device still there..

need help in reverting to orange UK gingerbread from flashed retail
Hi
I also need to go back to stock orange from UK retail need some help.
this is my problem:
1) I was on orange froyo
2) flashed using rsd lite and the sbf file given http://forum.xda-developers.com/showpost.php?p=19428405&postcount=215
the problem:
1) Now the RSD lite is not able to recognise the my phone software/ IMEI. However, it shows as phone connected to USB. i'm getting the following result on the left top window in rsd lite
ITechnology: N / A
Software Version: N / A
Flex Version: N / A
Bootloader Version: fce9
DRM Version: N/A
MEI/ESN/MEID: N / A
2) The motorola update software is also not able to recognise my phone - it shows phone not connected.
I want to revert to Orange (since the gingerbread is released by orange in UK now). Please need some help

You can't relock the bootloader. All u can do is make it appear as if it's locked again by doing as described above. The stock .sbf will remove the "unlocked" logo.
Sent from my MB860 using Tapatalk

yes, as i am doing, the bootloader is locked back as stock..
if you need to unlock it back use http://forum.xda-developers.com/showthread.php?t=1136261 method..

kzkalra said:
Hi
I also need to go back to stock orange from UK retail need some help.
this is my problem:
1) I was on orange froyo
2) flashed using rsd lite and the sbf file given http://forum.xda-developers.com/showpost.php?p=19428405&postcount=215
the problem:
1) Now the RSD lite is not able to recognise the my phone software/ IMEI. However, it shows as phone connected to USB. i'm getting the following result on the left top window in rsd lite
ITechnology: N / A
Software Version: N / A
Flex Version: N / A
Bootloader Version: fce9
DRM Version: N/A
MEI/ESN/MEID: N / A
2) The motorola update software is also not able to recognise my phone - it shows phone not connected.
I want to revert to Orange (since the gingerbread is released by orange in UK now). Please need some help
Click to expand...
Click to collapse
Try this, it worked for me.
Turn your phone off first
Open up motorola software update program.
Connect your phone to the usb.
Turn your phone back on and the software update program will recognise your phone once it boots up fully.
The program will detect that you have the latest retail UK version and tell you that you have the latest update. The only way to get the Orange gingerbread back on your phone is to flash it via RSD Lite. The Orange gingerbread version can be found in the Super firmware thread. But why would you want to do that when you've successfully " debranded " your Atrix. I was in the same position as you, but i've left the UK retail version on mine
Sent from my Atrix using xda premium

matematic said:
I saw a lot of questions from other people asking how to revert back to stock rom !!!2.3.4!!! with locked bootloader. I found a way but please USE THIS AT YOUR OWN RISK.
Click to expand...
Click to collapse
alil said:
yes, as i am doing, the bootloader is locked back as stock..
if you need to unlock it back use http://forum.xda-developers.com/showthread.php?t=1136261 method..
Click to expand...
Click to collapse
YOU CANNOT RELOCK THE BOOTLOADER!!!!
My God!..........How many threads like this do there have to be???

decker39 said:
Try this, it worked for me.
Turn your phone off first
Open up motorola software update program.
Connect your phone to the usb.
Turn your phone back on and the software update program will recognise your phone once it boots up fully.
The program will detect that you have the latest retail UK version and tell you that you have the latest update. The only way to get the Orange gingerbread back on your phone is to flash it via RSD Lite. The Orange gingerbread version can be found in the Super firmware thread. But why would you want to do that when you've successfully " debranded " your Atrix. I was in the same position as you, but i've left the UK retail version on mine
Sent from my Atrix using xda premium
Click to expand...
Click to collapse
The only reason I want to go back to orange is because I feel that my phone is no longer as smooth as it used to be!! There is definitely a some lag and I think it may be due to retail version sbf used to update to gingerbread.
Sent from my MB860 using XDA App

Related

[Q] How to unlock AT&T Atrix 4g bootloader

Hey i have At&t Motorola Atrix, i Want to unlock my boot loader. My phone is running 2.3.4(OTA), webtop version 1.2.0-110,build number 4.5.91 and kernel 2.6.32.9 and more over i rooted my phone . i read so many threads and in the end im so confused and i dont know from where to start. can you help me ?
http://forum.xda-developers.com/showthread.php?t=1202883
Sent from my MB860 using XDA App
im getting error when i click on start button it says failed to flash
You cannot get all the info you need in one post, search through the thread and look to see if anyone else is having your issue.
Here is another thread that offer up some links that might help too.
http://forum.xda-developers.com/showthread.php?t=1154600
You will have to read a little bit. It would take a very long time for someone to compile a tutorial that would include all the variables that might be relative to this phone.
usman.daud said:
im getting error when i click on start button it says failed to flash
Click to expand...
Click to collapse
usman.daud said:
Hey i have At&t Motorola Atrix, i Want to unlock my boot loader. My phone is running 2.3.4(OTA), webtop version 1.2.0-110,build number 4.5.91 and kernel 2.6.32.9 and more over i rooted my phone . i read so many threads and in the end im so confused and i dont know from where to start. can you help me ?
Click to expand...
Click to collapse
I can confirm that flashing the latest sbf from pudding will work on 2.3.4 OTA, using RSD lite. After flashing the sbf, you will get a 0x1000 cannot boot message, but don't worry, its not a real hard brick. When that message pops up, IMMEDIATELY go into fastboot and type "fastboot oem unlock" and you will not be bricked, and you will be unlocked. I performed this on my 2.3.4 OTA atrix yesterday, without any problems.
where u get latest Sbf file ? when i click start for flashing it gave error that flashing process failed
and also have u tired any custom rom ? and how was the experience
http://forum.xda-developers.com/showthread.php?t=1182526
use that sbf file. it works on 2.3.4 OTA.
read through the thread - it will explain well what to expect, explain the soft brick issue and how to remedy it, and also what you need to have in advance for it to all work smoothly.
MY RSD give error. when i entered in RSd support rsdlite show it connected when i start sbf flashing it give error that flashing process failed.0x7027 phone cant retrieve any help with that ?.
try using this version of RSDLite. It worked for me with this one.
http://forum.gsmhosting.com/vbb/archive/t-1229831.html
im previously on 5.3.1 is safe to use a downgraded version
yeah.
its just a different version of the pc software. downgrading is only a problem if you're downgrading phone software but this is ok.
not working
Same error? Did you check that the drivers installed correctly? Try a reboot on pc and use a different usb port

How to take Motorola Photon 4g out of the grave?

Recently I ordered Motorola 4g from US.... It was with stock Sprint Sunfire OS.
System Version : 45.4.13.MB855.Sprint.en.Us
Model MB855
Android 2.3.5
Baseband N_01.29.10R
Webtop 1.2.0-180
Kernel [email protected] #2
Build 4.5.1A-1_SUN-254_13
So what I did, I was trying to install custom rom on that. Steps I had taken
Rooted phone via installing SuperUser and various rooting methods like ClickOnce, Photon -Torpedo but no one seems successful , while executing I got errors everytime. But after day or two I came to know about that my phone is rooted. As I was getting SuperUser popups on root operations. Then I installed CWM and tried to install the ROM from there but everytime I got stucked at Yellow Triangular icon (recovery mode).
Repeated step on rooting process and unlocking the bootloader by applying pudding.rar and fastboot commands and every time i got the error and Starting RSD Screens, but anyhow my phone recovers itself to its original boot state afetr pulling out battery and manually restrating.
Finally one day I use some other Recovery Tool , i am unable to recall the name. It installed and rebooted successfully in the recovery mode. I then wipe the dalvik cache, wipe factory reset and then tried to installl the custom rom that MIUI 2.68 i think . I was happy to see some designer screens on my phone and then it said rom installed successfully.
I then reboot my phone and found it in the Failed To Start2 , Starting RSD mode
I tried various way to restore...
Installing pudding.rar using RSD lite but everytime I got sec_exception : sec_exception : b655, eddc,eb
I then tried reinstalling SBF : 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_7-CM-release-keys-signed-Sprint-US.sbf and sunfire-2.3.5-4.5.1A-1_SUN-254_4 but while enumerating phone I got error sec_exception febe 4e 4e
I have also tried nopudding4u.sbf but the same result.
Please,, help me and my phone out .. as its going to be more than a week... i feel handicaaped...
Please guide me through the step by step , which file and when and please do provide the links of the files to download.
**Update OTA with 2.3.5 before murdering.....**
Most of those sticky threads are outdated, without important informations. You need to search in whole dev section, there are the answers, how to recover your bricked Photon.
bring it ON..............please
peetr_ said:
Most of those sticky threads are outdated, without important informations. You need to search in whole dev section, there are the answers, how to recover your bricked Photon.
Click to expand...
Click to collapse
Thanks for your reply peetr_.. I would like to know on the basis of my exceptions , Is my phone recoverable or become as useless as a paperweight. I can see fastboot modes and RSD modes and can even swicth between them. In some other forum , I came to know that ,I can reover my phone back but for that I need a locked bootstrap for 2.3.5 and then reflash using the stock sbf.
So could you please tell me how to do that and where to find those files. I am digging XDA Forums and AndroidForum.com past two weeks for the solution...
amitranjan said:
Recently I ordered Motorola 4g from US.... It was with stock Sprint Sunfire OS.
System Version : 45.4.13.MB855.Sprint.en.Us
Model MB855
Android 2.3.5
Baseband N_01.29.10R
Webtop 1.2.0-180
Kernel [email protected] #2
Build 4.5.1A-1_SUN-254_13
So what I did, I was trying to install custom rom on that. Steps I had taken
Rooted phone via installing SuperUser and various rooting methods like ClickOnce, Photon -Torpedo but no one seems successful , while executing I got errors everytime. But after day or two I came to know about that my phone is rooted. As I was getting SuperUser popups on root operations. Then I installed CWM and tried to install the ROM from there but everytime I got stucked at Yellow Triangular icon (recovery mode).
Repeated step on rooting process and unlocking the bootloader by applying pudding.rar and fastboot commands and every time i got the error and Starting RSD Screens, but anyhow my phone recovers itself to its original boot state afetr pulling out battery and manually restrating.
Finally one day I use some other Recovery Tool , i am unable to recall the name. It installed and rebooted successfully in the recovery mode. I then wipe the dalvik cache, wipe factory reset and then tried to installl the custom rom that MIUI 2.68 i think . I was happy to see some designer screens on my phone and then it said rom installed successfully.
I then reboot my phone and found it in the Failed To Start2 , Starting RSD mode
I tried various way to restore...
Installing pudding.rar using RSD lite but everytime I got sec_exception : sec_exception : b655, eddc,eb
I then tried reinstalling SBF : 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_7-CM-release-keys-signed-Sprint-US.sbf and sunfire-2.3.5-4.5.1A-1_SUN-254_4 but while enumerating phone I got error sec_exception febe 4e 4e
I have also tried nopudding4u.sbf but the same result.
Please,, help me and my phone out .. as its going to be more than a week... i feel handicaaped...
Please guide me through the step by step , which file and when and please do provide the links of the files to download.
**Update OTA with 2.3.5 before murdering.....**
Click to expand...
Click to collapse
Should have read around a bit before you attempted all of this. Go to the general and QA section of the photon forums and search the first few pages of each. There will be 5 or 6 different threads with people who have experienced the same problems in which we have completely outlined the steps you would need to take.
Is this what I have to do ????
Acvice said:
Should have read around a bit before you attempted all of this. Go to the general and QA section of the photon forums and search the first few pages of each. There will be 5 or 6 different threads with people who have experienced the same problems in which we have completely outlined the steps you would need to take.
Click to expand...
Click to collapse
Step by step 2.3.5 unbrick:
1)Flash this SBF (http://d-h.st/XGJ). Now you'll have stock 2.3.5 for Electrify. But you need Sprint services (I assume), so you don't stop here. -
Flashing ,Using RSD Lite
Click to expand...
Click to collapse
2) Download bootstrap from DroidX2 forum, and get it working. Of course you need to root your photon first.
3) Flash this ROM (http://forum.xda-developers.com/showthread.php?p=30332325) from bootstrap. Please follow the instructions for this ROM carefully, you don't wanna flash the SBF again.
From bootstrap means - adb fast boot, am i right????/
Click to expand...
Click to collapse
4) Flash 254_13 modules (http://d-h.st/aAi) with bootstrap. you need them.
5) Flash 2.3.5_254_13 sv2 boot, recovery and cdrom image sbf (http://d-h.st/TeB) with RSD Lite.
6) Flash 254_12 libmoto_ril.so (http://d-h.st/BmX) with bootstrap. You don't need to flash the radio SBF.
4) and 6) is not needed, if you install rom 3)
amitranjan said:
Step by step 2.3.5 unbrick:
1)Flash this SBF (http://d-h.st/XGJ). Now you'll have stock 2.3.5 for Electrify. But you need Sprint services (I assume), so you don't stop here. -
2) Download bootstrap from DroidX2 forum, and get it working. Of course you need to root your photon first.
3) Flash this ROM (http://forum.xda-developers.com/showthread.php?p=30332325) from bootstrap. Please follow the instructions for this ROM carefully, you don't wanna flash the SBF again.
4) Flash 254_13 modules (http://d-h.st/aAi) with bootstrap. you need them.
5) Flash 2.3.5_254_13 sv2 boot, recovery and cdrom image sbf (http://d-h.st/TeB) with RSD Lite.
6) Flash 254_12 libmoto_ril.so (http://d-h.st/BmX) with bootstrap. You don't need to flash the radio SBF.
4) and 6) is not needed, if you install rom 3)
Click to expand...
Click to collapse
Im pretty sure thats right. However, I have never faced this problem first hand so i would wait for a second opinion before going forward. Peetr will know, hopefully he will chime in.
Yes. Exactly those steps.
Bootstrap is bootstrap CWM recovery, you must download the apk and install, following the instructions.
peetr_ said:
Yes. Exactly those steps.
Bootstrap is bootstrap CWM recovery, you must download the apk and install, following the instructions.
Click to expand...
Click to collapse
Thanks for the confirmation of the steps.
Few more things:
1. I have still my bootloader locked i think. So will these these steps work.
2. Flash this SBF (http://d-h.st/XGJ). Now you'll have stock 2.3.5 for Electrify. But you need Sprint services (I assume), so you don't stop here. - What If I dont want Sprint Services? I am here in India and there is no sprint network. We have VodaFone, Airtel and Other operators, still on 3G. No 4G here. Can I stop @ 1.
3. Can I install , other custom roms on it, in future If I want?
No cause you will have a photon radio with electrify modules won't work.
Unable to boot into recovery
peetr_ said:
Yes. Exactly those steps.
Bootstrap is bootstrap CWM recovery, you must download the apk and install, following the instructions.
Click to expand...
Click to collapse
I have installed the SBF correctly and too roooted the phone. Also installed the DroidX Bootstrap by Koushik Dutta. but I am unable to boot into recovery. Can I try ClockWorkMod Recovery... that we generally used to flash roms or strictly bootstrap is necessary. I have tried System recovery by Tenfar but it wont boot into recovery...
Please help
It's recovery for DroidX2. Not DroidX.
And you must be connected to wall charger, to boot into it.
Photon is now Electrified with LIFE ----
Thanks a TON to all the Photon Guys, especially peetr_. :highfive::highfive::highfive::highfive::good::good::good::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory: Now my photon and ELECTRIFIED and has a SPRINTing LIFE....
But still I am curious about the custom rom installation.
1. Is it possible and safe or I have to stick with the stock rom.
2. Wait for motorola / sprint for their another update if they allow us to installl custom roms (well its not possible, I know)
You can try some custom roms for locked bootloader. You can always sbf back.
Can you provide me some links for my phone as i am facing some unusual restarts withis rom...
Sent from my MB855 using xda app-developers app
Also i am facing Sleep Of Death issue after waking up this dead phone from grave....
Earlier it was working fine. Generally i face one or two a day.
Is rom upgradation a solution? I hv experienced whenever it goes to sleep the back panel gets heated up than normal. Also when i use wifi 3g the same thing happens...
Sent from my MB855 using xda app-developers app
amitranjan said:
Step by step 2.3.5 unbrick:
1)Flash this SBF (http://d-h.st/XGJ). Now you'll have stock 2.3.5 for Electrify. But you need Sprint services (I assume), so you don't stop here. -
2) Download bootstrap from DroidX2 forum, and get it working. Of course you need to root your photon first.
3) Flash this ROM (http://forum.xda-developers.com/showthread.php?p=30332325) from bootstrap. Please follow the instructions for this ROM carefully, you don't wanna flash the SBF again.
4) Flash 254_13 modules (http://d-h.st/aAi) with bootstrap. you need them.
5) Flash 2.3.5_254_13 sv2 boot, recovery and cdrom image sbf (http://d-h.st/TeB) with RSD Lite.
6) Flash 254_12 libmoto_ril.so (http://d-h.st/BmX) with bootstrap. You don't need to flash the radio SBF.
4) and 6) is not needed, if you install rom 3)
Click to expand...
Click to collapse
This seems like a lot of work just to get a softbricked Photon 4G to work. Didn't Motorola release a soak test about two months ago? Do we have an SBF for that? If so then couldn't someone with a bricked Photon 4G (running 2.3.5 stock) just flash the soak test files and get the Photon working fine?
Also if someone does follow these instructions, will they be able to get the latest OTAs from Sprint when ICS/JB goes official?
sub2k1 said:
This seems like a lot of work just to get a softbricked Photon 4G to work. Didn't Motorola release a soak test about two months ago? Do we have an SBF for that? If so then couldn't someone with a bricked Photon 4G (running 2.3.5 stock) just flash the soak test files and get the Photon working fine?
Also if someone does follow these instructions, will they be able to get the latest OTAs from Sprint when ICS/JB goes official?
Click to expand...
Click to collapse
This is the only way, there is no sbf for the latest soak. And honestly, this process doesnt take very long. If you cant spare an hour to unbrick a phone then people shouldnt be tinkering with their phone in the first place. And nope, you will remain locked, no way to unlock and install ics/jb.
"Say Apple one more MoPho'n time..."
I'm currently struggling with this process. I flashed the .sbf via rsdlite. It gets to 100% but then it says error because phone failed to re-enumerate. I installed RockoDev's ROM last night and phone was bricked all night while I naively thought it would load. Was stuck at the NOW screen when I went to bed and hadn't changed when I woke up.
Acvice said:
And nope, you will remain locked, no way to unlock and install ics/jb.
Click to expand...
Click to collapse
I believe you misunderstood my final question but that is okay.
InsanePostman: Are you also known as huntingoctopus on other sites?
sub2k1 said:
I believe you misunderstood my final question but that is okay.
InsanePostman: Are you also known as huntingoctopus on other sites?
Click to expand...
Click to collapse
I am not. It used to be an old gamer tag that I used for various games. On a side note I still can't get past step 1. Phone fails to re-enumerate after flashing .sbf file.

Did I Soft-Brick or Hard-Brick My Phone?

I’m stuck in a rut. I got a Motorola Atrix 4G (AT&T) last week and was trying to unlock it using the following instructions: http://wiki.cyanogenmod.com/wiki/Motorola_Atrix_4G:_Full_Update_Guide#Unlocking_the_Bootloader
I installed RSD Lite 5.7, the Motorola Drivers, and downloaded the unlockable bootloader. I got to step 12, and then everything quickly went downhill. I got stuck on the horrid “Failed to boot 0x1000” screen, along with the list of options. I have tried booting into RSD, running RSD Lite, and loading the bootloader, but I get a “Device Interface” prompt…not exactly sure of the wording at the moment. I drained the battery last week messing with it, and had to buy a standalone charger (which I just received today).
I am not sure of the Android version/firmware version that was on the phone prior to doing this. I know, mistake #1.
My computer is recognizing the Atrix, but the RSD Lite is not able to install the unlockable bootloader (listed on the above site). I have downloaded one “Stock Restore” MFBSR.zip (I can’t seem to find the link to the thread) but this was not able to fix the problem. It recognized my device, but the Atrix wouldn’t accept any of the commands.
I am not sure of what to do, short of calling Motorola and trying to get them to help. I’m sure they would either want to replace it (charging me) or just basically tell me I’m SOL.
I wanted to try FruitCake’s recovery tool, and found the following thread, which has mirror links of some of the files:
http://forum.xda-developers.com/showthread.php?p=24472332#post24472332
I have no clue as to what I would use, so I haven’t even tried downloading one of them. I’m seriously at my wit’s end..I have been Googling and trying to avoid making a post about this. Any help is greatly appreciated. I am about to try the following directions:
http://forum.xda-developers.com/showpost.php?p=19986512&post=234
Also probably important to note that I tried unlocking it using Fastboot, but it was "Waiting for device" for forever and did nothing. When I try to go into Recovery, it says Magic Value Mismatch.
Thanks guys.
http://forum.xda-developers.com/showthread.php?t=1857099
Try! Good Luck!
maggedo said:
I was stuck on the Moto Dual Core Screen as well. I used the automatic unlock MAIN program to unlock, root and install custom recovery. When I tried to flash epinter's CM10 ROM I got boot hang at the Moto screen.
You can RSD back to stock (e.g. I found the AT&T .151 sbf file and restored my phone to working condition on 2.3.6 GB).
In the end I figured out that the recovery in the auto unlock tool (both the telfar and CWM options) was borking the CM10 flash. I ended up:
1. RSD lite AT&T .151 GB 2.3.6 sbf file
2. Unlock Bootloader with automatic unlock
3. Root and install custom recovery
4. Boot into android
5. download goo.manager from play store
6. Install open source recovery with goo.manager
7. reboot into recovery
8. Make backup of everything
9. Flash JB CM10 & GApps
Phone is up and running w/o issues. A bit of googling should find you the necessary sbf to get you on your feet again.
Good luck!
Click to expand...
Click to collapse
I am trying this...but when I am in RSD Lite, it says "Failed Flashing Process: Unable to retrieve interface handle (0x7027)". It does detect my device before this, saying Port Type: USB, IMEI/ESN/MEID: NA, and Status: Connected...
Please help!
KokoATL said:
I am trying this...but when I am in RSD Lite, it says "Failed Flashing Process: Unable to retrieve interface handle (0x7027)". It does detect my device before this, saying Port Type: USB, IMEI/ESN/MEID: NA, and Status: Connected...
Please help!
Click to expand...
Click to collapse
http<delete>://briefmobile.com/how-to-unlock-the-atrix-4g-bootloader
Go there and unlock your bootloader first.
Then flash the sbf above on post#2 again.
have u solve your problem?
Sent from my MB860 using xda premium
maggedo_defy said:
http<delete>://briefmobile.com/how-to-unlock-the-atrix-4g-bootloader
Go there and unlock your bootloader first.
Then flash the sbf above on post#2 again.
Click to expand...
Click to collapse
He can't. Fastboot doesn't respond. Also he can't flash any SBF, everything fails.
Looks more like a hard brick to me...
Perhaps... (option number 3)
http://forum.xda-developers.com/showthread.php?t=1182871
soft bricked
KokoATL said:
I’m stuck in a rut. I got a Motorola Atrix 4G (AT&T) last week and was trying to unlock it using the following instructions: http://wiki.cyanogenmod.com/wiki/Motorola_Atrix_4G:_Full_Update_Guide#Unlocking_the_Bootloader
I installed RSD Lite 5.7, the Motorola Drivers, and downloaded the unlockable bootloader. I got to step 12, and then everything quickly went downhill. I got stuck on the horrid “Failed to boot 0x1000” screen, along with the list of options. I have tried booting into RSD, running RSD Lite, and loading the bootloader, but I get a “Device Interface” prompt…not exactly sure of the wording at the moment. I drained the battery last week messing with it, and had to buy a standalone charger (which I just received today).
I am not sure of the Android version/firmware version that was on the phone prior to doing this. I know, mistake #1.
My computer is recognizing the Atrix, but the RSD Lite is not able to install the unlockable bootloader (listed on the above site). I have downloaded one “Stock Restore” MFBSR.zip (I can’t seem to find the link to the thread) but this was not able to fix the problem. It recognized my device, but the Atrix wouldn’t accept any of the commands.
I am not sure of what to do, short of calling Motorola and trying to get them to help. I’m sure they would either want to replace it (charging me) or just basically tell me I’m SOL.
I wanted to try FruitCake’s recovery tool, and found the following thread, which has mirror links of some of the files:
http://forum.xda-developers.com/showthread.php?p=24472332#post24472332
I have no clue as to what I would use, so I haven’t even tried downloading one of them. I’m seriously at my wit’s end..I have been Googling and trying to avoid making a post about this. Any help is greatly appreciated. I am about to try the following directions:
http://forum.xda-developers.com/showpost.php?p=19986512&post=234
Also probably important to note that I tried unlocking it using Fastboot, but it was "Waiting for device" for forever and did nothing. When I try to go into Recovery, it says Magic Value Mismatch.
Thanks guys.
Click to expand...
Click to collapse
Did the same to mine about 5hr 's ago, but i found These SBF files (https://sites.google.com/site/motosbf/atrix-sbf-files ) found the one i was running ,booted the phone into RSD mode again and ran it in RSD Lite ,took a while about 30mins but it worked .
hope this works for you

Motorola atrix 4g stops booting at logo and flashes red light

Hi,
I have a Motorola atrix 4g. The phone will not boot up. It turns on and the Motorola logo come then the red light stars blinking. after a minute or so the phone restarts and repeats the process. I tryed factory hard reset but no luck.
i fount this on the web http://forum.xda-developers.com/showthread.php?t=966405 but has no idea how to do this.
Pleas help me
thank you
Pgeorge
It happens if there is somthing wrong when you install a rom
try to find another rom and flash it if you unlocked the bootloader
or flash ATT 4.5.91 Rom via RSD Lite ONLY IF YOU HAVE LOCKED BOOTLOADER
Jack Krauser said:
It happens if there is somthing wrong when you install a rom
try to find another rom and flash it if you unlocked the bootloader
or flash ATT 4.5.91 Rom via RSD Lite ONLY IF YOU HAVE LOCKED BOOTLOADER
Click to expand...
Click to collapse
hi,
thank you for the fast replay. I have rsd installed, but where can i find this rom
Softbrick
Is bootloader unlocked? Says on m logo?
Sent from my MB860 using xda premium
stevendeb25 said:
Softbrick
Is bootloader unlocked? Says on m logo?
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
It is not unlocked. There is nothing on the logo. Only the m
help
kinggeorge3287 said:
It is not unlocked. There is nothing on the logo. Only the m
Click to expand...
Click to collapse
help please
go here to download any atrix related files
visit that site, it contains everything for the atrix and the best place to get roms, tools, utilities, mods, tweaks, and so forth....
but first download the zip file below this message. I uploaded the zip file for you that has adb, fastboot & moto-fastboot(lets you install .img over 100mb), the necessary dll files & atrix recovery image & command.bat which just opens the command prompt window for you and puts you into the folder so you dont have to navigate anywhere in command prompt to located folders.
first try this, download the zip file, extract to any folder like c:\fastboot
then run the command.bat file to quickly bring up a command prompt and type these commands
Code:
fastboot -w
fastboot flash recovery recovery.img
fastboot reboot
that may solve your issue if your kernel installed properly and the boot.img file was properly written to the boot partition. If it doesn't solve your problem, go to that link above to find the kernel for whatever rom you're on, att, cm7 or cm9. Get the correct kernel thats compatible, pull out the boot.img from that zip file and also place it into your fastboot folder, then go to fastboot mode again and type "fastboot flash boot boot.img" and then fastboot reboot.
android-DEP said:
go here to download any atrix related files
visit that site, it contains everything for the atrix and the best place to get roms, tools, utilities, mods, tweaks, and so forth....
but first download the zip file below this message. I uploaded the zip file for you that has adb, fastboot & moto-fastboot(lets you install .img over 100mb), the necessary dll files & atrix recovery image & command.bat which just opens the command prompt window for you and puts you into the folder so you dont have to navigate anywhere in command prompt to located folders.
first try this, download the zip file, extract to any folder like c:\fastboot
then run the command.bat file to quickly bring up a command prompt and type these commands
Code:
fastboot -w
fastboot flash recovery recovery.img
fastboot reboot
that may solve your issue if your kernel installed properly and the boot.img file was properly written to the boot partition. If it doesn't solve your problem, go to that link above to find the kernel for whatever rom you're on, att, cm7 or cm9. Get the correct kernel thats compatible, pull out the boot.img from that zip file and also place it into your fastboot folder, then go to fastboot mode again and type "fastboot flash boot boot.img" and then fastboot reboot.
Click to expand...
Click to collapse
Hi,
I tryed doing this, but i get a error " Failed to process command flash: recovery error (0x180002)
I think when i tried to flash rom with RSD LIght may have done something to the files. and it was no help. I dont get a flashing red light now. only the phone stops booting at M logo.
Now How do i flash new rome ? Do i use RSD Light or something else. I know that RSB Requires .sbf file but all the files i see in the site you gave me are .zip.
i also tryed the fastboot flash boot boot.img and no luck, it gvies me the error "Failed to process command flash: recovery error (0x180002)"
thank you for the replay
Pgeorge
do you have clockworkmod recovery installed or any custom recovery installed? if not, then thats why it wont flash, your bootloader is locked.
the whole idea behind using clockworkmod recovery is to avoid using RSD to flash sbf files which can brick the phone easily. Its best to avoid using RSD to flash sbf files on your phone at all costs and leave only as a last resort method if you just cannot recover the phone.
Flashing a new rom would normally be done by already having your phone rooted and unlocked with clockworkmod recovery or some other custom recovery installed so you can boot into recovery and choose "install from zip" and point to the zip file that has the rom. The custom recovery does the flashing for you and its a safer method of flashing roms on the phone than RSD.
If you got no other choice and I know what thats like, i been there too. Download RSD Lite v5.6, should be a free download online somewhere, and then search online for "1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf", then use RSD to flash that sbf onto phone.
Before trying that, goto http://samcripp.com/files/ and in the folder OTA Updates, download the first file named Blur_Version_91.4.5.141.MB860.ATT.en.US.zip and put it into the fastboot folder, boot into fastboot again and try "fastboot update Blur_Version_91.4.5.141.MB860.ATT.en.US.zip" and you may be able to get away with just using fastboot to flash that update onto the phone to restore corrupt files. I would try this before using RSD to flash the phone
android-DEP said:
do you have clockworkmod recovery installed or any custom recovery installed? if not, then thats why it wont flash, your bootloader is locked.
the whole idea behind using clockworkmod recovery is to avoid using RSD to flash sbf files which can brick the phone easily. Its best to avoid using RSD to flash sbf files on your phone at all costs and leave only as a last resort method if you just cannot recover the phone.
Flashing a new rom would normally be done by already having your phone rooted and unlocked with clockworkmod recovery or some other custom recovery installed so you can boot into recovery and choose "install from zip" and point to the zip file that has the rom. The custom recovery does the flashing for you and its a safer method of flashing roms on the phone than RSD.
If you got no other choice and I know what thats like, i been there too. Download RSD Lite v5.6, should be a free download online somewhere, and then search online for "1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf", then use RSD to flash that sbf onto phone.
Before trying that, goto http://samcripp.com/files/ and in the folder OTA Updates, download the first file named Blur_Version_91.4.5.141.MB860.ATT.en.US.zip and put it into the fastboot folder, boot into fastboot again and try "fastboot update Blur_Version_91.4.5.141.MB860.ATT.en.US.zip" and you may be able to get away with just using fastboot to flash that update onto the phone to restore corrupt files. I would try this before using RSD to flash the phone
Click to expand...
Click to collapse
Well i tryed everything you provided, but no luck. I tryed the RSD but it dont go past the M logo after flash. any other way you know?
thnak you
pgeorge
http://forum.xda-developers.com/showthread.php?t=1163342
you said that site doesnt have any SBF files to download, this is a good example of why the owner decided against posting the sbf files online. A lot of people from what I heard, were either soft bricking their phones into temporary hat weights or going full out hard into brick city on a one way ticket joy ride. Flashing sbf files is very risky and RSD tool isn't really meant for the public to be downloading to use at home and flash full roms over their devices. Thats a Motorola utility and it's not exactly a risk-free method of flashing the rom inside these phones. Plus getting SBF files online, you rarely know 100% if its compatible with your model phone or where came from exactly and that it's integrity can be checked for 100% consistency that nothing half-way through the file is missing any chunks of code or is corrupt. Try sticking to only using fastboot & adb & get clockworkmod recovery to make FULL and complete devices backups.
Now that I learned my lesson a few times, no matter what, first thing I always do in recovery is make a backup before I flash anything at all, just in case of just in case, its better to measure twice and cut once.
try that link above and restore stock gingerbread 2.3.4, phone doesnt need to be unlocked or root, and make sure to use "moto-fastboot.exe" it lets you push\pull & install files larger than 200MB onto phone through fastboot, the regular fastboot has some limit on file sizes
Hi,
to give you a update noting worked. The link you provided dont have any working lnks to download. I tryed some other once and no luck. It gave me "failed to boot 1". so i flashed this file "1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf" it went away, but no boot after the logo. I don't know what i am doing wrong. Any other ideas?
Thank you
Pgeorge
android-DEP said:
http://forum.xda-developers.com/showthread.php?t=1163342
you said that site doesnt have any SBF files to download, this is a good example of why the owner decided against posting the sbf files online. A lot of people from what I heard, were either soft bricking their phones into temporary hat weights or going full out hard into brick city on a one way ticket joy ride. Flashing sbf files is very risky and RSD tool isn't really meant for the public to be downloading to use at home and flash full roms over their devices. Thats a Motorola utility and it's not exactly a risk-free method of flashing the rom inside these phones. Plus getting SBF files online, you rarely know 100% if its compatible with your model phone or where came from exactly and that it's integrity can be checked for 100% consistency that nothing half-way through the file is missing any chunks of code or is corrupt. Try sticking to only using fastboot & adb & get clockworkmod recovery to make FULL and complete devices backups.
Now that I learned my lesson a few times, no matter what, first thing I always do in recovery is make a backup before I flash anything at all, just in case of just in case, its better to measure twice and cut once.
try that link above and restore stock gingerbread 2.3.4, phone doesnt need to be unlocked or root, and make sure to use "moto-fastboot.exe" it lets you push\pull & install files larger than 200MB onto phone through fastboot, the regular fastboot has some limit on file sizes
Click to expand...
Click to collapse
kinggeorge3287 said:
Hi,
to give you a update noting worked. The link you provided dont have any working lnks to download. I tryed some other once and no luck. It gave me "failed to boot 1". so i flashed this file "1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf" it went away, but no boot after the logo. I don't know what i am doing wrong. Any other ideas?
Thank you
Pgeorge
Click to expand...
Click to collapse
when rds end flashing the sbf the phone gets a bootlop or failed to boot error again?
lucamibel said:
when rds end flashing the sbf the phone gets a bootlop or failed to boot error again?
Click to expand...
Click to collapse
it starts up, the M logo comes and it freezes there. To turn the phone off i have to pull the battery.
thank you
Pgeorge
Restore Your Motorola Atrix 4G Back to 4.5.91 Stock Firmware
it helps to remove any problem related to rom..
With so many Android phones literally flooding the market these days, it’s no wonder that there are also so many firmware upgrades and custom firmware being developed and released every now and then. A superior device with great stuff neatly packed into it, the Motorola Atrix 4G is one of the devices for whom developers have devoted significant firmware love.
One reason for the attention that devs give to the Atrix 4G is that it is a fantastic device with a dual-core Nvidia Tegra 2 processor and robust ability for handling impressive graphics and video without choking. Together with its powerful processor and 1 GB of RAM, the Atrix 4G is a mean powerhouse that can be further exploited with the use of third-party applications and custom ROMs.
In an age where technology is constantly changing at an alarming pace it is important to always have a trusted source to get your updates in a timely fashion. Custom ROMs and factory firmware updates have played a crucial role in the development in many of our devices.
For those of you who have rooted your Atrix 4G and already have installed custom ROMs, then you might already have some bad experiences with regards to unofficial firmware sources. Unofficial firmware such as custom ROMs are literally filled with many bugs and disabled features. In many cases, these ROMs are not stable for daily use.
Luckily for owners of the Motorola Atrix 4G, there’s an escape hatch for reverting to stock, functioning firmware and return the phone to its factory state.
In this tutorial, you will learn how to roll back your Motorola Atrix 4G to the official firmware version 4.5.91, regardless of your current firmware
HERE IS THE LINK FOR YOUR PROBLEM....BEST OF LUCK
kinggeorge3287 said:
it starts up, the M logo comes and it freezes there. To turn the phone off i have to pull the battery.
thank you
Pgeorge
Click to expand...
Click to collapse
then you can now try unlocking and flashing cwm recovery and flash a custom rom to avoid using rds again
sikkijazz said:
Restore Your Motorola Atrix 4G Back to 4.5.91 Stock Firmware
it helps to remove any problem related to rom..
With so many Android phones literally flooding the market these days, it’s no wonder that there are also so many firmware upgrades and custom firmware being developed and released every now and then. A superior device with great stuff neatly packed into it, the Motorola Atrix 4G is one of the devices for whom developers have devoted significant firmware love.
One reason for the attention that devs give to the Atrix 4G is that it is a fantastic device with a dual-core Nvidia Tegra 2 processor and robust ability for handling impressive graphics and video without choking. Together with its powerful processor and 1 GB of RAM, the Atrix 4G is a mean powerhouse that can be further exploited with the use of third-party applications and custom ROMs.
In an age where technology is constantly changing at an alarming pace it is important to always have a trusted source to get your updates in a timely fashion. Custom ROMs and factory firmware updates have played a crucial role in the development in many of our devices.
For those of you who have rooted your Atrix 4G and already have installed custom ROMs, then you might already have some bad experiences with regards to unofficial firmware sources. Unofficial firmware such as custom ROMs are literally filled with many bugs and disabled features. In many cases, these ROMs are not stable for daily use.
Luckily for owners of the Motorola Atrix 4G, there’s an escape hatch for reverting to stock, functioning firmware and return the phone to its factory state.
In this tutorial, you will learn how to roll back your Motorola Atrix 4G to the official firmware version 4.5.91, regardless of your current firmware
HERE IS THE LINK FOR YOUR PROBLEM....BEST OF LUCK
Click to expand...
Click to collapse
Hi,
doing this gave me SVF:108:1:2
fail to boot 3
starting rsd mode
lucamibel said:
then you can now try unlocking and flashing cwm recovery and flash a custom rom to avoid using rds again
Click to expand...
Click to collapse
So how do i go about doing this? is there a link i can use?
thank you
Pgeorge
kinggeorge3287 said:
So how do i go about doing this? is there a link i can use?
thank you
Pgeorge
Click to expand...
Click to collapse
help please
kinggeorge3287 said:
help please
Click to expand...
Click to collapse
I am able to get into android recovery. It has a option to update from sdcard. Can i do something with this?
Pleas help
Pgeorge

[Q] How to Change region from ME to EU

I have a Droid Razr Maxx and my System version is 673.94.324.XT910.MERetail.en.06 running Android 4.0.4 (ICS)
On checking for Updates, it says my phone is up to date.
Motorola site says this phone will remain on ICS and hence I want to change my region to EU where JB has been released for retail version.
If I want to flash my system to JellyBean retail version say Britan EU from this link, http://forum.xda-developers.com/showthread.php?t=2231289
what is the correct sequence of flashes to be performed?
Should I first go to ICS of EU region then go from ICS to JB, or can I go directly to Jelly Bean.
I have never flashed my Motorola Razr Maxxx and am not rooted. Can anyone please give me pointers to where I should start?
Once I flash to a different region, would I receive OTA updates for that region ROMS?
Just flash it on top of your current Rom. No need to go to EU ICS first.
Updates for the RazR? I'll bet there won't be any Updates anymore.
Gesendet von meinem XT890
HSD-Pilot said:
Just flash it on top of your current Rom. No need to go to EU ICS first.
Updates for the RazR? I'll bet there won't be any Updates anymore.
Gesendet von meinem XT890
Click to expand...
Click to collapse
Thanks for the reply.
However one more question: My phone is not rooted and when I go to AP Fastboot mode, I get the following message
Code:
AP Fastboot Flash Mode (S)
0A.74
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED. Status Code:0
Battery OK
OK to Program
Connect USB
Data Cable
My Worry is the line stating that Device is LOCKED.
Should flashing using RSDLite work without any additional steps?
Of course it shows Device is locked > That's your Bootloader! It's always locked on the XT910 This has nothing to do with RSD.
same
hay
kindly guide this method more because i am also have same s/w.
i have rooted razar maxx and using safestrape 3.11
i cannot use rsd before
atifrawn said:
hay
kindly guide this method more because i am also have same s/w.
i have rooted razar maxx and using safestrape 3.11
i cannot use rsd before
Click to expand...
Click to collapse
I successfully flashed my ROM to JellyBean en.EU (UK Retail version) -> 982.124.14.XT910.Retail.en.EU from ICS 673.94.324.XT910.MERetail.en.06
The steps I followed were as follows:
1. Take backup of your SD Card as this flash erases everything from internal SD Card and make sure battery level is at least 80%.
2. Turn phone off and remove your Sim and external SD card (Just to be safe)
3. Go to boot menu (While in power down, press and hold both volume keys, then press power button)
4. Scroll to AP Fastboot mode using volume down key. Select the AP fastboot mode using volume Up key.
5. Start RSD Lite 6.0 in computer (Make sure you have motorola drivers installed)
6. Connect your phone to computer using USB cable (In AP Fastboot mode)
7. Select the downloaded AP Fastboot file (Retail British is what I used) from http://forum.xda-developers.com/showthread.php?t=2231289
8. Click on Start
9. Sit back and relax for about 10 mins when flashing will be complete and your phone will reboot automatically.
More information of tools can be found out in this thread -> http://forum.xda-developers.com/showthread.php?t=1539192
Remember: Once you flash JB, there is no way to go back to ICS. But I am loving Jelly Bean and Google Now. Phone feels smoother.
Hit Thanks if I helped you.
retail.eu
hay
performing this method can i lost root.
i read some place that vodafone jb firmware is much beter .
can i use that fir.
where i can find that s/w
thanks
atifrawn said:
hay
performing this method can i lost root.
i read some place that vodafone jb firmware is much beter .
can i use that fir.
where i can find that s/w
thanks
Click to expand...
Click to collapse
Yes, you will lose root by flashing. But there is a new linux based exploit for rooting again which i have not tried but seems to work for others -> http://forum.xda-developers.com/showthread.php?t=2257137
If your current ROM version is Retail (i.e not locked to a specific carrier like vodafone), you should only install Retail version.

Categories

Resources