hi every body , my t-mobile vibrant has breaked because i have flash incorrect pit file with odin, now my phone is off and have the black screen and odin can't know my phone ,i do every way i know but it's still in black screen and not runing downloading mod or recovery, and odin can't know it too , somebody help me ...
There are about a 1000 different posts on this forum and others that explain the half-dozen (or more) ways to get your phone into download mode. They don't all work on every Vibrant, but keep trying. One of them will work. If all else fails, buy/make a usb jig that will force it into DL mode. This one works for me every time: With Odin open, plug USB cable into your computer. Pull your battery out and leave it out. Hold down both the volume up AND down buttons at the same time and plug the USB data cable into the phone.
N.B. 1. If you aren't using a Samsung data cable, this may fail.
2. Try different (older) versions of Odin. My phone for some reason really prefers Odin 3 Version 1.0--no idea why, but it would sometimes hang with later versions.
3. Run Odin as Admin. (Right click, run as, etc...)
If you need an older version of Odin, search. After that, if you can't find it, search some more. If that fails, PM me and I will put v1.0 up (but I know you will find it before it comes to that)
Edit: Get the proper pit file here: http://sourceforge.net/projects/stockodinjfd/files/s1_odin_20100512.pit/download and don't ever use anything else unless a trusted developer tells you to.
It never seizes to amaze me how people just start flashing away without doing the proper research and understanding what flashing an Android phone is all about.
Unbelievable
You need to get your phone to a download mode. To get the download mode:
1. Unplug your phone
2. Pull the battery
3. Make sure the other end of the usb is still connected to a PC
4. Press and hold Vol Up and Down
5. Plug the USB to your phone
6. Slide the battery in
I did all of those steps with two hands. lolz
Good luck
MK4_SyReX said:
hi every body , my t-mobile vibrant has breaked because i have flash incorrect pit file with odin, now my phone is off and have the black screen and odin can't know my phone ,i do every way i know but it's still in black screen and not runing downloading mod or recovery, and odin can't know it too , somebody help me ...
Click to expand...
Click to collapse
Related
I googled how to reset my phone back to factory settings and they gave me this link
"[STOCK ROM] Odin3 One-Click Downloader"
(cant link links)
i misread that it was for the captivate, and i went through with all the directions.
now my phone keeps flashing an AT&T bootscreen and i cant get it in recovery mode..
help?
same here... that odin thing isn't working. Im just stuck at the vibrant boot screen. I know how to get into download mode but my pc or ODin doesnt recognize that i have my phone in. it's suppose to light up yellow or something. the tar files and all of that stuff is so confusing.
nevermind, i found the Odin program for the samsung vibrant and re did it.. but i still have BOTH at&t boot screen at the tmobile vibrant boot screen.. anyone know how to get rid of that? it would be much appreciated thanks!
http://forum.xda-developers.com/showthread.php?t=741027
where did u find it.. please share..
Edit: NVM..
stepinmyworld said:
same here... that odin thing isn't working. Im just stuck at the vibrant boot screen. I know how to get into download mode but my pc or ODin doesnt recognize that i have my phone in. it's suppose to light up yellow or something. the tar files and all of that stuff is so confusing.
Click to expand...
Click to collapse
You may have tried this but these are the steps that eventually worked for me.
1. Put your phone in download mode by plugging it in and then holding Vol Up+Down and Power. As SOON as the screen goes black release power but NOT Vol Up+Down.
2. Launch Odin
3. Unplug your phone.
4. Load the pit and pda files into odin.
5. Plug your phone back in. You should now see one of the small blocks turn yellow and show you the com port. If not, something is wrong with your drivers.
6. Click start. If it flashes, great. If it hangs at File analasys then repeat 1-5.
6a. If Odin hangs at cache.rfs then move on to 6b.
6b. Unplug your phone (Odin will say it was removed) and remove the battery. DO NOT SHUT DOWN ODIN!!!!!!
6c. Put the battery back in and plug it back into your computer and put it back into download mode using step 1.
6d. Press start on Odin and it should now flash.
Again, this worked for me, it may have been a fluke and I'm not willing to try it again. Good luck!!!
Does not boot!
What if the phone does not boot. All happened after I tried to flash the kernel back to the stock one. USB plugged in, battery is fully charged- still no sign of life. Any solution for that? No recover or download mode!
setzer715 said:
You may have tried this but these are the steps that eventually worked for me.
1. Put your phone in download mode by plugging it in and then holding Vol Up+Down and Power. As SOON as the screen goes black release power but NOT Vol Up+Down.
2. Launch Odin
3. Unplug your phone.
4. Load the pit and pda files into odin.
5. Plug your phone back in. You should now see one of the small blocks turn yellow and show you the com port. If not, something is wrong with your drivers.
6. Click start. If it flashes, great. If it hangs at File analasys then repeat 1-5.
6a. If Odin hangs at cache.rfs then move on to 6b.
6b. Unplug your phone (Odin will say it was removed) and remove the battery. DO NOT SHUT DOWN ODIN!!!!!!
6c. Put the battery back in and plug it back into your computer and put it back into download mode using step 1.
6d. Press start on Odin and it should now flash.
Again, this worked for me, it may have been a fluke and I'm not willing to try it again. Good luck!!!
Click to expand...
Click to collapse
i am completely lost when it comes to ODIN. I need to know the exact program to use. I have Odin Multi Downloader v4.03.. but it keeps giving me file path error and stuff. I have the right drivers i think because it does recognize my phone. im just so confused with this rar tar stuff. I would pay someone 20 dollars through paypal if they can walk me through this.
stepinmyworld said:
i am completely lost when it comes to ODIN. I need to know the exact program to use. I have Odin Multi Downloader v4.03.. but it keeps giving me file path error and stuff. I have the right drivers i think because it does recognize my phone. im just so confused with this rar tar stuff. I would pay someone 20 dollars through paypal if they can walk me through this.
Click to expand...
Click to collapse
I don't want your money, but if you PM me I will try to type up a detailed how to.
mffu said:
What if the phone does not boot. All happened after I tried to flash the kernel back to the stock one. USB plugged in, battery is fully charged- still no sign of life. Any solution for that? No recover or download mode!
Click to expand...
Click to collapse
What have you done to put it in download mode? You should power off your phone, plug it into your computer. It should then enter the charge mode where you see a picture of your battery being charged (or if you were like me and screwed up somewhere you may see a little picture of a phone, computer and yellow triangle in between them). If you get either of those then press and hold all three VOL up, VOL down and power. AS SOON AS the screen goes black release ONLY Power and it should go into download mode.
If you plug your phone into your computer (powered off) and nothing happens then you just be bricked. Call TMO and play dumb and hopefully get a replacement.
Ok,
The_Chrome_Coyote really helped me!!!! Thank you so much and im back up and running. There was something missing from the original tutorial, not that we should be spoon fed but I didn't have the WinRAR program on my pc and didn't know I needed to extract anything. I was looking for exe. for it to be a program and just open it. It's a little more complicated than that. I added my additions in BOLD
The_Chrome_Coyote's Original post to me:
Odin isnt that hard, its just REALLY picky about working.
Firstly you need to download the Samsung drivers for your OS which can be found:
http://forum.xda-developers.com/showthread.php?t=728929
added:
Second you need to make sure you download WinRAR x86 (32 bit) 3.93 (google it and you should be able to get it) otherwise if your pc doesn't have a program to recognize rar and tar files, you are out of luck.
then read this thread from JAC:
http://forum.xda-developers.com/showthread.php?t=734475
1. Now, Extract ODIN from its .rar and place the .exe on your desktop
2. Extract the .pit file from its.rar and place that on your desktop
3. Place the JFD .tar file on your desktop but DO NOT EXTRACT
Now you can use ODIN
4. Start ODIN Odin3. [Android + SLP], through ODIN select the .pit file
5. Hit "PDA" button, and through ODIN select the .tar file
6. Plug your TURNED OFF PHONE into the USB cable
7. Wait for the Battery/ charging indicator to start
8. HOLD VOL UP+ VOL DOWN+ POWER, as soon as the screen goes black RELEASE POWER, and continue to HOLD VOL UP+ VOL DOWN Until it enters download mode. Which should happen quickly and looks like a men at work highway sign.
9. If a COM port has turned Yellow in ODIN, then the device has been recognized. If it hasnt, unplug and plug your phone back in.
10. Dont select any options other than whats set at default.
11. Hit Start and be patient, takes me maybe 5 minutes to get back up and running.
NOTE: If you do not see a blue progress bar on the phone's screen after a minute;
11a. Turn your phone off by pulling the battery.
11b. CLOSE ODIN
11c. Start at step 4 again.
ODIN needs to be open and ready to flash before the phone is plugged in, in my experience. Its very picking about this, and not everyone has this issue, but I did and following all these steps helped me flash my phone more times than I can count the other day haha.
Hope this helped! and your $20, donate it to Wes, JAC, or Eugene to keep them making great stuff for our phone.
Reply With Quote
Thank you thank you thank you
mffu said:
What if the phone does not boot. All happened after I tried to flash the kernel back to the stock one. USB plugged in, battery is fully charged- still no sign of life. Any solution for that? No recover or download mode!
Click to expand...
Click to collapse
Same thing happened to mine when i tried odin. Now all i get sometime when it come on. are 7 rows of text that seems to be a code on screen in amber. Ishipped back 2 samsung. Since t-mobile won't take it after 14 days.
ok I screwed up guys.
I installed ROM manager from the market, flashed clockwork, it asked me if I wanted to partition and I said yes.
Now I just get a black screen at boot. I've managed to run odin and it says success. But I still just get a black screen after boot.
Little help?
I do have to say that if YOU DO NOT KNOW HOW TO EXTRACT A COMPRESSED FILE (RAR, ZIP,ETC) YOU HAVE NO BUSINESS FLASHING YOU'RE PHONE!! Odin or otherwise.
I am not being mean but at least stick to update.zip files flashed through recovery and make sure you read reviews of other users first, and understand the instructions completely.
Sent from my SGH-T959 using Tapatalk
daddysays said:
I do have to say that if YOU DO NOT KNOW HOW TO EXTRACT A COMPRESSED FILE (RAR, ZIP,ETC) YOU HAVE NO BUSINESS FLASHING YOU'RE PHONE!! Odin or otherwise.
I am not being mean but at least stick to update.zip files flashed through recovery and make sure you read reviews of other users first, and understand the instructions completely.
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
First: everyone was a noob at one time, so simmer down.
Second: Pleast post an update.zip that will make my phone work.
Cannot get past Galaxy S boot screen
I was using clockwork recovery installed through an update.zip file on my sd card. everything was working fine for about a day and then when i powered my phone off the next day and powered it back on it would not boot up past the Galaxy S screen. it goes to the Galaxy S screen and then goes blank but my hard keys stay lit up while my lcd is completely blank. I tried using the Odin method described in this thread and it seemed like it was going to work but i still cannot get past the boot screen. please help. willing to donate if needed
jmoney1017 said:
I was using clockwork recovery installed through an update.zip file on my sd card. everything was working fine for about a day and then when i powered my phone off the next day and powered it back on it would not boot up past the Galaxy S screen. it goes to the Galaxy S screen and then goes blank but my hard keys stay lit up while my lcd is completely blank. I tried using the Odin method described in this thread and it seemed like it was going to work but i still cannot get past the boot screen. please help. willing to donate if needed
Click to expand...
Click to collapse
If you can see the samsung logo you are fine. Load up recovery and try a full wipe first. If that fails then you can odin back to stock and root again.
Sent from my SGH-T959 using XDA App
1. If you have questions, there is a q and a forum for this device!!!!!!
2. THIS IS THE DEV PART OF THE FORUM. IE FOR DEVS POSTING STUFF FOR THE PHONE!!!!!
3. Learn how to Google. Not that hard. Example, you don't know what the *.rar extension is. GOOGLE IT!! Google knows everything.
4. If you don't have basic android or computer skills, don't try anything stupid. You do have a chance to brick your phone, even the pros like cyanogen have bricked their phones.
5. Don't offer cash for someone to fix your phone. Keep it in qna and some one will help you. Save your cash for the development that work hard on making these things work.
6. Can a mod please move this thread to qna.
7. THE MOST IMPORTANT THING. USE THE SEARCH FINCTION BUILT ONTO THE FORUMS. IT WILL SAVE YOU TIME AND THEN YOU WILL NOT LOOK LIKE NOOBS THAT JUST GOT THIS PHONE BECAUSE IT HAD AVITAR IN THE BOX!!!!!
Sent from my SGH-T959 using XDA App
cache.fs problem in odin
setzer715 said:
What have you done to put it in download mode? You should power off your phone, plug it into your computer. It should then enter the charge mode where you see a picture of your battery being charged (or if you were like me and screwed up somewhere you may see a little picture of a phone, computer and yellow triangle in between them). If you get either of those then press and hold all three VOL up, VOL down and power. AS SOON AS the screen goes black release ONLY Power and it should go into download mode.
If you plug your phone into your computer (powered off) and nothing happens then you just be bricked. Call TMO and play dumb and hopefully get a replacement.
Click to expand...
Click to collapse
I FOUND A SOLUTION TO THE CACHE.RFS PROBLEM!!
http://www.fractionalphones.com/?p=121
Ok heres the deal, I tried a bunch of custom roms eventually leading to hybridv3 then I tried flashing with the Stock vibrant rom and that didnt work so I went to Vibrant4, then stupidly renamed the Stock vibrant rom to update.zip and used android recovery to update packages. Now my phone goes through the boot up but I just get a black screen. Is there any hope for me?
Your Fired! Lol..jk
I would use odin to reload the stock firmware.
I can't seem to get my Vibrant to show up on a com port, I have the pit and the tar files but my vibrant wont show up in odin.
jmercil said:
Your Fired! Lol..jk
Click to expand...
Click to collapse
I did something similar a while back. You may need to flask the stock rom via odin. The link to the thread for it is in the bible sticky in this section. Set up odin before you connect the phone to the computer. Also if you use windows vista or 7 you need to open odin by right clicking and run as administrator. For it to work you need to get the phone to download mode. Pull the battery, put it back in. dont touch the power button. Hold the up and down volume buttons and plug the usb into the phone when the other end is already plugged into the computer. It should be in dl mode. Good luck
Sent from my SGH-T959 using XDA App
trying now...
Odin is doing it's thing right now, Thank you so much!!
Just to recap since the correct information has never been added to an OP:
You must install ODIN and the correct USB drivers from http://forum.xda-developers.com/showthread.php?p=7657252#post7657252 .
Get the phone into download mode. Several different instructions have been posted meaning either different versions of the same phone get into DLM different ways or everyone else is posting the wrong instructions.
What works on mine: Have phone off, ODIN open, and correct USB drivers already installed. HOLD vol up+vol down and plug in the USB, and do not touch the power button.
Was attempting to flash one of the leaked samsung roms using ODIN. Only way we were able to get phone into download mode as using the ADB command line with ADB Reboot Download.
Odin saw it, we started the process. Seemed to be working, but it got stuck with a black screen for over an hour (when I flashed my Vibrant process to all of 10 minutes). We thought the phone just didn't reset, so we unplugged it and hit the power button...and the dreaded cell phone...!...PC screen came up.
I've tried all manner of trying to get into recovery/download mode with no avail. Again, we tried EVERY combination of button presses to get INTO download mode initially, but only the ADB command line method worked.
Now we cannot get past this screen. Any ideas???
SCREWED!!!! Call TMO and have them send you a new one. Nothing you can do if it is hardware locked.
That's what I was afraid of. That is what he is going to do, glad mine didn't have that happen as that ROM has my Vibrant working like it should (GPS works now!!)
I wonder if having to force download mode via ADB was an indication that this phone would have a problem with flashing anything to it??
Never had a brick as many times as I fooled with my Dash and G1. Guess it was bound to happen sometime.
if the battery pull method won't get you into download mode you're likely screwed...
- Make sure USB cable is connected to PC, but disconnected from phone
- pull battery
- hold down VOL+UP & VOL+DOWN and do not release
- insert battery
- insert USB cable into phone
If after a few seconds download mode appears, release VOL keys...and....you've got download mode...if not, it's safe to say your gonna replace the phone..
If that works, I'd also recommend using Odin3 v1.30 instead of v1.00 that most people use. Available here... http://forum.xda-developers.com/showthread.php?t=790026
Wishing you the best of luck!
Try runnin odin with NO pit or pda file. Ive been at that screen like 100 times, let me kniw what it does
You mean start ODIN and just plug in the phone?
tweak89 said:
You mean start ODIN and just plug in the phone?
Click to expand...
Click to collapse
try my steps in this post , works every time for me, to get to download mode ...
I tryed flashing a rom without disabling voodoo and know my phone wont even turn on. Any help please!!!!
ireiricky said:
I tryed flashing a rom without disabling voodoo and know my phone wont even turn on. Any help please!!!!
Click to expand...
Click to collapse
If you look couple threads down, you'll see my thread, and I am having the same problem. Slightly different cause, but of the same nature, and the exact same problem. I have not had any real help yet, but I have been scouring the forums here. And I think the only option, if none of the button combinations work, as they don't seem to for me, and you're getting a complete brick, is perhaps the usb jig resistor method... but even that I don't think is 100% because some of the people who created the guides on how to make the jig resistor said it only worked for softbrick, not total brick like our cases. Unless someone can verify otherwise...
Thanks for the reply man i don't know what to do man i spent $400 0n this phone there must be a way but no luck on google either
ireiricky said:
I tryed flashing a rom without disabling voodoo and know my phone wont even turn on. Any help please!!!!
Click to expand...
Click to collapse
Try this. Take your sim card, microsd and battery out. Leave battery out for a few minutes.
Open odin and load with the 512 pit and Jfd tar.
Plug one end of usb cable into computer only
take your vibrant with everything still out of it
hold down both vol buttons (vol up and down) and never let go
do not touch power
while holding down both volume buttons plug in your usb cable into the phone with the other end previously in the computer...do all this while holding down volume buttons and dont let go
now grab your battery with your free hand and while still holding down the vol buttons now plug in your battery
if all goes well your.phone should go into download mode at which pt you can let go of volume buttons.
If this doesnt work you can maybe try the jig if your bootloader is intact
also since you were messing with voodoo you might need to first flash eugenes froyo tbat doesnt brick...im not too sure on this so ask around and look it up.
You need this first of all (Froyo that does not brick)
http://eb-productions.proboards.com/index.cgi?board=samsungsgs&action=display&thread=8
jordanjf86 said:
1. Download Eugenes 'Froyo that does not brick' file.
2. Extract the files.
3. Open Odin, plug in your phone, then put it into download mode.
4. load the PIT file in appropriate area.
5. load the .tar file in the PDA area.
6. DO NOT check 're-partition'.
7. Click start, let it finish. Your phone will load and reboot into stock recovery. It will error out again. DONT panic! This is what's supposed to happen.
8. Now, pull your battery.
9. Download the 'True stock 2.1 firmware for the vibrant'.
10. Extract the files.
11. Once again, open Odin, plug in your phone, put into download mode.
12. Load the PIT file into the appropriate area and the .tar in the PDA area.
13. THIS TIME you want to check the 're-partition' box.
14. Now click start, let it finish, and this time your phone will load up just fine! BAM!
Click to expand...
Click to collapse
Don't forget to thank :]
iv'e tryied that i read somewhere that it's a hard brick
Then try accessing download mode by first, removing the sd card, sim, and battery, second, plugging in the usb cable, third, holding down the two buttons on the side of the phone, and finally, while holding down those two buttons, inserting the battery.
I havee tried that mothod many times no luck just a blank screen
Then commit a fraud and send it back to T-Mobile saying it suddenly stopped working.
Or if you prefer a wild card you can use a JIG
http://forum.xda-developers.com/showthread.php?t=819551
Edit: Never mind it will not work for you. Sorry :/
Edit 2: The phone does not even turn the buttons on??
no nothing turns on at all no power but when i put it to charge it heats up but no battery screen
Yea, take it to T-Mobile and get it replaced. I got mine switched at T-Mobile once, and it would only boot to the custom Nexus animation....the lady still swapped it out. It all depends on the rep, if they won't switch it, go to a different location. Eventually you'll find someone.
i don't think thats possible seeing as im in Canada bought it off ebay
take it to a phone expert. he will flash a bootloader to your phone.
Sent from my SGH-T959 using XDA App
Hey,
I decided last night I would try and backup my phone, however Kies thought it would be fun to start updating, and somehow it locked up. Now I get a message on my phone that says :-
Firmware Upgrade Encountered an Issue. Please select recovery mode in Kies and try again.
Now I have done what it says however everytime i connect it up i get a message saying "USB Device Not Recognised"
I have downloaded the drivers, with no such luck, and tried installing them via Kies again with no joy. Reading on the forum I found out about the recovery mode which I have manage to get the phone into and downloaded what I thought was the right thing but it's not working at all.
I think what Ideally i need is a way to get the phone back to a working version, I just have no idea how to do it. I have downloaded Odin as that seems to be a program that every page says.
Not sure if you need the information but it was on 3G UK network.
Sorry this probably sounds extremely noob like but I've spent 10 hours on it already and am confused beyond imagination
Kies is one of them horrible programs that just doesnt work properly.
as you have read about Odin, i will assume you know you can use this to flash a stock firmware to your phone.
Have a look for intratechs thread of offical firmwares (linked below), download one for your phone and flash it via odin.
Please read the top information in his thread it tells you what to do and how to do it.
http://forum.xda-developers.com/showthread.php?t=1075278
How do i resolve the other issue of windows not recognizing it ?
put the phone in download mode and pc should recognize the phone
If we're talking about a phone running stock firmware that you've never mucked around with (rooted it, run non-stock firmware on it, etc, etc), send it in to Samsung/whomever you bought it from for warranty service.'
If you start flashing things in order to try & fix it, you run the slight risk you might brick it/void your warranty. Which means you end up paying to get it fixed.
I wouldn't tempt fate if I were in your situation.
If we're talking about a phone you've been mucking around with (like most of us here ), then go to Samfirmware.com & search for the original firmware that came with your phone & flash it following whatever instructions they have for flashing firmware downloaded from their site.
Alternatively, if you're happy with the latest firmware available for your phone model/carrier/country, find/download the PC version of Checkfus (search for it on here/Google). This will allow you to download a tarball of the latest available firmware for your carrier/country, which you can flash according to the instructions here.
Also, before you do anything, try a factory reset if you haven't already.
1.Find your new firmware version and download the file from the links
2.Extract the file, so that you now have a .tar file.
3.Download and run the Odin software from the provided link (200KB)
4.Reboot the phone to download mode
To do this, turn the phone off, then simultaneously press the volume down key, the home button and then press the power button. If you see a warning, press the volume up button to continue.
5.In Odin, click the button named “PDA” and select your .tar file (your rom).
If the rom has several files, also put in the PDA, Phone/Modem and CSC files. but do NOT put in a .pit file.
6.Connect the phone to the computer with usb cable, and wait till ID:COM turns yellow.
7.Click the “Start” button, and Odin will flash your rom.
As simple as that.
I have the files however CANNOT get windows to detect the phone....it simply refuses every single time.
All i get is USB Device Not Recognised
Which i get after holding down, Power, Vol Down and Menu till i get the download screen. Occassionally (VERY RARELY) it has been detected by odin then fails on factory
UKVampire said:
I have the files however CANNOT get windows to detect the phone....it simply refuses every single time.
All i get is USB Device Not Recognised
Which i get after holding down, Power, Vol Down and Menu till i get the download screen. Occassionally (VERY RARELY) it has been detected by odin then fails on factory
Click to expand...
Click to collapse
How to use ODIN
Open odin load firmware
Put phone to download mode and read instructions yes/no
Connect Samsung usb cable .
Start in Odin
A fail during firmware flash is often a faulty download or wrong firmware for the phone .
PC does not see phone usually USB driver problem try another PC Kies must not be running occasionally fxxxd phone .
je
UKVampire said:
I have the files however CANNOT get windows to detect the phone....it simply refuses every single time.
All i get is USB Device Not Recognised
Which i get after holding down, Power, Vol Down and Menu till i get the download screen. Occassionally (VERY RARELY) it has been detected by odin then fails on factory
Click to expand...
Click to collapse
Are you plugged directly into a port on the PC, and not through a keyboard pass-through port, or a USB hub? Or have you tried a different cable?
Ok guys,
I have got it to the point it is able to flash now. Problem is I have some dodgy yellow ! and it wont go any further than that.
How do I get rid of that and get back to bog standard everything, I have used CheckFus and downloaded the firmware but it wont get rid of the !
UKVampire said:
Ok guys,
I have got it to the point it is able to flash now. Problem is I have some dodgy yellow ! and it wont go any further than that.
How do I get rid of that and get back to bog standard everything, I have used CheckFus and downloaded the firmware but it wont get rid of the !
Click to expand...
Click to collapse
Gonna need a little more detail than that. Yellow triangle at boot under where it says "Samsung Galaxy SII"? It's not really clear.
Sent from my GT-I9100 using XDA
Don't worry )
I have fixed it and am back to being on default software with no problems at all
Thanks for all the help on this forum