Hi, I am looking for usb driver for viewpad 7e for using adb. Can anybody provide and link or pointers from where can I get the same.
Thanks,
Remy
I got a wellcom a800, same model of Viewpad 7.
when I plug the pad within my PC(WIN 7), I'll got a new mobile device in my computer and it looks like a USB storage device. it contained a setup file to install the drive of your pad.
Wish this can help you~
Related
hi all ,
have a good day!
i have bought view sonic viewpad 10,
i tried to instal new windows 7 to it but i couldn't ,
i tried to instal through usb flash 8GB and USB CD ROM
every time windows 7 installation can't detect hard drive of view pad,
i downloaded view sonic driver and load them through installation but windows 7 can't install them after reading them ,
Plz help me and give me full guide to instal new copy of windows 7,
thanks in-advance
mody4889330 said:
hi all ,
have a good day!
i have bought view sonic viewpad 10,
i tried to instal new windows 7 to it but i couldn't ,
i tried to instal through usb flash 8GB and USB CD ROM
every time windows 7 installation can't detect hard drive of view pad,
i downloaded view sonic driver and load them through installation but windows 7 can't install them after reading them ,
Plz help me and give me full guide to instal new copy of windows 7,
thanks in-advance
Click to expand...
Click to collapse
hi
is this not an android os tab if so how is it possible to install Win7
even if their is a possibility to install Win7 their must be a special version for the tab look for that
The tablet comes with a copy of Windows 7 in the box. You have to use a USB DVD drive to install it. Full instructions should have been included in the box.
If you've lost either of these things I suggest you contact Viewsonic with your receipt details and hope they send you replacements.
I've tried the 3.2 tegav v2 RC2 buto I've founded it more instable than the RC1 version does anyone has the same problem?
hi here easiest way
1.use ubuntu 11.10
2.gparted the disk clean format
3. use usb pendrive copy window7 to it
4.boot from usb
5. follow the step to install windows7
done
Hi, I am looking for usb driver for viewpad 7 for using adb. Can anybody provide and link or pointers from where can I get the same.
Thanks,
Dang
There's no "real" driver...
Just connect your Viewpad 7 to your PC.
A window pops up where you can select "setup.exe" - select it.
Then a few drivers get installed (perhaps a restart is necessary)
Seems like the Viewpad 7 has a virtual drive which gets mounted when connecting it to a PC - it's shown up as virtual CD-drive for me under Windows XP and Windows 7.
PS: The drivers are also located on the virtual CD-drive in a directory.
Make sure you run the file from the virtual optical drive if you have autorun disabled.
Sent from my HTC Sensation Z710e using XDA App
plug youre viewpad in now youre pc see een cdrom right click and open use that adb.exe that one works
How to remove the virtual drive
I have already installed the drivers from this drive, but whenever I connect the device, the virtual CD-ROM drive still appears. Anyone know how to get rid of it?
LEGEND383 said:
I have already installed the drivers from this drive, but whenever I connect the device, the virtual CD-ROM drive still appears. Anyone know how to get rid of it?
Click to expand...
Click to collapse
I always open the Sync tool then (do nothing, no sync or so).
That's the only way my Windows 7 PC recognizes the tablet via ADB.
I have been doing that as well, but it's just annoying to have this extra drive that is of no use and just sits there taking up a drive letter.
Stupid question, ive never used adb, but does this mean i dont have to download it because already cames on that virtual drive, and so i only need to install it ?
Now i manage to install the drivers.
I go to the command line in windows and write :
adb usb
adb devices, and get this:
List of devices attached
FM6120420141
Then i do,
adb shell, and nothing happens.
Ive tried several commands and nothing works, what m i doing wrong here ?
Hi guys, i tried another pc with windows xp and everything worked perfect at first try. Thans for the help VPAD7, nice chating.
Bye all the other losers.
Hi VPAD7
Can you share the solution for "adb devices" not working on windows7? I am facing he same problem with my Viewpad7.
Thanks for your contribution to the forum.
---------- Post added at 12:45 AM ---------- Previous post was at 12:39 AM ----------
VPAD7 said:
Now i manage to install the drivers.
Could you share how did you manage to get drivers installed on windows7? I am also seeing same issue with viewpad7. I am trying to root it.
Click to expand...
Click to collapse
Solved driver issue on windows7
Hi,
I was facing issue in connecting viewpad7 to windows7 machine. Even synchronization steps were failing. Manuall attempt to run "adb.exe devices" were unable to detect the device. Here is my steps that I did for rooting the device with SuperOnceClick(SOC)1.7-
1. Initially driver were not detected/installed on windows7. Only CDROM displaying setup was displayed and clicking "Setup.exe" is not installing drivers. Copy the All files on computer and say folder name is "v7Setup".
2. To Install drivers, Connect Tablet/Phone to windows7, select "USB Tethering in tablet" (This is needed to detect devices by Windows7), in windows7:check the "Device Manager", it can show "Others" two devices: HSUSB & RNDIS. Update the driver for both devices from "v7setup/RUT/*" folders.
3. Now start SOC1.7 and select "rageagainstthecage" and click root. It may wait at "Running rageagainstthecage..." message in SOC log window. Then disconnect the Tablet after waiting for 1-2 minute and connect again after beep sound from windows7. Here, again I needed to install the drivers as mentioned in step2. SOC1.7 will proceed and finally in poup message, it will ask to "push su" files. And Done.
Hey folks,
got a "little" problem with my device. I tried to copy some videos of it and it just won't work.
---
I connect my device to my PC and these things happen ...
Windows 7 x64:
Nothing.
Windows 7 x64 with Kies installed:
Windows sees that there is a new device, but it won't let me open as a storage ... "Code 10" in the device manager.
Windows 7 x64 with Kies installed and device in mass storage mode:
Windows sees that there is a new device, but it won't let me open as a storage ... "Code 10" in the device manager.
Ubuntu 11.10 x64:
Nothing.
Ubuntu 11.10 x64 and device in mass storage mode:
I see some files on my device, but when trying to open them, I only get some errors ... the real problem here, when I disconnect the USB cable (or unmount) then there are no files on my device left ... everything has been moved to "lost.dir" and I can´t open them from there, not even from my phone.
---
I tried to connect with USB debugging enabled, but it would work.
Any ideas?
/Edit 1:
The only way to copy stuff over to my computer is by using Kies Air ... and it takes ages for HD videos.
/Edit 2: THE SOLUTIONS LOL :-D
1. I had to connect my device via another USB slot
2. when USB debugging is enabled, it still wouldn't mount; then I installed this app https://market.android.com/details?id=com.jrtstudio.automount and now everything works just fine
freakin.ro said:
Hey folks,
got a "little" problem with my device. I tried to copy some videos of it and it just won't work.
---
I connect my device to my PC and these things happen ...
Windows 7 x64:
Nothing.
Windows 7 x64 with Kies installed:
Windows sees that there is a new device, but it won't let me open as a storage ... "Code 10" in the device manager.
Windows 7 x64 with Kies installed and device in mass storage mode:
Windows sees that there is a new device, but it won't let me open as a storage ... "Code 10" in the device manager.
Ubuntu 11.10 x64:
Nothing.
Ubuntu 11.10 x64 and device in mass storage mode:
I see some files on my device, but when trying to open them, I only get some errors ... the real problem here, when I disconnect the USB cable (or unmount) then there are no files on my device left ... everything has been moved to "lost.dir" and I can´t open them from there, not even from my phone.
---
I tried to connect with USB debugging enabled, but it would work.
Any ideas?
/Edit 1:
The only way to copy stuff over to my computer is by using Kies Air ... and it takes ages for HD videos.
Click to expand...
Click to collapse
1) Using a Rom? If yes check in thread if it, if this problem is already known.
2) Tried different USB-Slots?
3) Connect phone, search in device manager for the device and uninstall the drivers.
Then un- later replug the phone and wait if all drivers got installed again.
CHEERS ;-)
Sent from my Galaxy S2 - I9100 with SensatioN Rom!
Lost DIr is for error files that have been corrupted .
jje
... connected to another USB port and it really works :-D it´s on the same controller ... so now I´m really confused lol.
I´m running Samsung's stock 2.3.4. I´ll try to get ADB working later and if it works i´ll close this, thanks very much
freakin.ro said:
... connected to another USB port and it really works :-D it´s on the same controller ... so now I´m really confused lol.
I´m running Samsung's stock 2.3.4. I´ll try to get ADB working later and if it works i´ll close this, thanks very much
Click to expand...
Click to collapse
You're welcome, mate ;-)
Sent from my Galaxy S2 - I9100 with SensatioN Rom!
JJEgan said:
Lost DIr is for error files that have been corrupted .
jje
Click to expand...
Click to collapse
I know, is there a way to restore this files?
so, just tried another app:
https://market.android.com/details?id=com.jrtstudio.automount
it mounts my device correctly even when USB debugging is enabled :-D
hi,
i wanted to start android development on a real, but not too expensive device.
So i bought this one: http://www.amazon.de/WiPad-Multitou...=sr_1_2?s=ce-de&ie=UTF8&qid=1337256098&sr=1-2
The manufactorer is CUBE: http://www.cube-tablet.com/cube-k8g...8-1-2ghz-camera-8gb-capacitive-tablet-pc.html
It works fine and i wanted to connect it to my PC, running windows 7.
The problem is: I could not find any usb driver on the (chinese) manufactorer site.
In the device manager the device was listed as "K8GT_W" and marked with "no driver installed".
Can someone please tell me, if there is a driver for this device or how to use some "generic" usb device driver with this device?
I downloaded the google USB driver with the android SDK manager.
The i selected "update driver" from the device maanger + selected the google usb driver download directory.
This shows the message "K8GT_W could not be installed".
The manufacturers is CUBE:http://www.vaful.com/cube-k8gt-delu...roid-40-capacitive-touch-screen-p-100130.html
I also encountered the same problem!
me 2
did you solve the problem? and found any thing?
Im looking for a usb driver for a visture v97 hd, also a china tablet with the exact same issue you guys are having. anyone have a generic driver for us so we can charge our tablets via usb ?
Can anyone help me root this tablet? I only saw one topic on it and it seems to be for linux, i need to do this on windows 7.
also trying to get it connected via usb but after i disabled MTP and enabled usb debugging all i see in windows is "android" (i can only see it in device manager) no removable device or anything
bump