Has anyone purchased the "Battery Only Charger" from the Verizon Store or Online website.
http://www.verizonwireless.com/b2c/store/accessory?action=accessoryDetails&archetypeId=12852
I'm curious to find out the battery charging output.
I purchased the Seidio Multi-Function Battery Charger and it outputs 500mA.. 12 hours to charge the extended battery that is completely dead.
Sent from my ADR6425LVW
Related
I recently bought a 1900mAh anker battery for the Sensation and I plan to use it for my Amaze.
On the battery it says that the limited charge voltage is 4.2V and on my charger it says that its output is 5V. Does this mean that I should not charge my anker battery with my charger? Or will it be fine?
It will charge fine. I have 2 anker batteries.
I've just started using my S3 in my car connected to a car charger and have started noticing it gives the phone a super charge which means that I still have about 80% battery after about 6 hours use, this compared to around 50% battery if I was just to use my normal charger.
However my normal charger has a splitter cable on it which also charges my spare battery which is in a Samsung desk stand (sold as a Extra battery kit). It got me thinking can chargers give a different level of charge to a battery, even though they still 100% charge it?
Zammo76 said:
I've just started using my S3 in my car connected to a car charger and have started noticing it gives the phone a super charge which means that I still have about 80% battery after about 6 hours use, this compared to around 50% battery if I was just to use my normal charger.
However my normal charger has a splitter cable on it which also charges my spare battery which is in a Samsung desk stand (sold as a Extra battery kit). It got me thinking can chargers give a different level of charge to a battery, even though they still 100% charge it?
Click to expand...
Click to collapse
Yes, several custom kernels have settings to adjust mains and usb charging currents
so, isn't it clear that questions go in the questions section?
I wasn't to sure if the post was going to include a question before I posted it, but if its a problem delete it or whatever I'm not really bothered.
Besides the oem charger, which is the best quality spare battery charger? My anker charger broke after a few months of use, and from what I see Zero Lemon seems to sell the exact same charger only its rebranded. Are there any better options?
Were you using Anker batteries? Did you get them through Amazon or elsewhere? How did/do they compare to the standard battery in your opinion?
Has anyone found a good power bank that can turbo charge the Turbo 2? I had the Aukey Charger for my Turbo 1, but it doesn't work for the Turbo 2 (AUKEY 10400mAh Portable External Battery Power Bank Fast Charger with Qualcomm Quick Charge 2.0) Anybody have any suggestions?
I have the Aukey 10400mah with the same results, pack will only turbo charge if phone is above 90% charged.
Also tired the Motorola Power Pack Slim 5100mAh, DT2 doesn't even detect a turbo charge when connected.
Even tried the Qi-Infinity 35,000mAh for the Surface Pro 4 that offers quick charge capabilities, DT2 didn't get above a 1000mA charge.
I can confirm that the TechMatte 5200mAh battery pack works with the DT2 @ 49% battery life, the pack will charge the phone to 100% with roughly 1/4 of charge remaining on the battery pack (Maxed out at a 3500mA charge rate, front end of the pack got very hot!). I'm going to try to get the DT2 below 10% to see how this pack will perform.
http://www.amazon.com/gp/product/B0...rd_t=36701&pf_rd_p=2079475242&pf_rd_i=desktop
Sent from my XT1585
That is really disappointing to hear. Thanks for the info. Will your aukey 10400 power bank charge your DT2 regularly (without quick charge)? Mine will just turn off after about 10 seconds.
TanMan007 said:
That is really disappointing to hear. Thanks for the info. Will your aukey 10400 power bank charge your DT2 regularly (without quick charge)? Mine will just turn off after about 10 seconds.
Click to expand...
Click to collapse
Nope, mine does the same and shuts off after 10 seconds.
Sent from my XT1585
I have the Anker PowerCore+ 10050. It has QC2.0 and works on my DT2. The only issue I've seen is that I think the first one I had was defective. It only charged 1.3 - 1.4 times.
The manufacturer stated only 50-60% efficiency from stated capacity, but that should still be at least 1.5x.
As the title states my battery mod fails to charge on charges other than turbo charger, has anyone had luck with working with a different charger?
Mine charges fine on a generic USB-C charger. It's obviously slower, but it works.
I thought I was having the same problem a couple of days ago. It looked like the phone was only charging and the Incipio power pack wasn't. The internal phone battery reached 100% but the mod was showing 0%. I decided to just leave it and surely enough it was charging, just really really slowly. I was using a normal portable charger with a USB-C cable as I was away from home. It takes a very long time to charge both using this setup. Then again, I've found that the battery pack in general takes a long time to charge in comparison to the phone even when using the supplied turbo charger.
HTH
Ooms
dj_ooms said:
I thought I was having the same problem a couple of days ago. It looked like the phone was only charging and the Incipio power pack wasn't. The internal phone battery reached 100% but the mod was showing 0%. I decided to just leave it and surely enough it was charging, just really really slowly. I was using a normal portable charger with a USB-C cable as I was away from home. It takes a very long time to charge both using this setup. Then again, I've found that the battery pack in general takes a long time to charge in comparison to the phone even when using the supplied turbo charger.
HTH
Ooms
Click to expand...
Click to collapse
I wonder if anyone else has this issue? I have the Tumi power pack wireless charging battery mod and it charges extremely. I'm using the stock 30w Turbo charger that came with the phone. I loaded up Amphere and the rate I was getting was 290 mah.
I've noticed that while using the phone while charging, when the phone is @100 & [email protected], every time the phone drops to 99 it stops charging the pack and then charges the phone. So, I will just pop the battery on a wireless charger or not use my phone while charging the battery. I have this cool qi/qc3.0 hub that makes charging my phone AND battery a breeze, so that's what I will often do.
Hello I have Moto Z and the Incipio power. It was charging before with phone with the type c charger which come with box but now I don't know the reason the Incipio doesn't charge !! when connect the Incipio give me notification with 97% and after 3 sec it is 0% and not charging from the power or charging the phone same also when power off the phone !! Could you please advise?
Using the official turbocharger provided by Motorola, the Battery pack and the phone battery will both charge at the same time. I have noticed using a generic charger/USB-C cable via the PC to charge, it charges the phone battery first and then only will charge the battery pack (once the phone reaches 100%). That is my experience...